Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
B10-0017
NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL TIMES TOWN O VVAfI Town of Vail, Community Development, 75 South Frontage Road, Vail, Colorado 81657 p. 970.479.2139, f. 970.479.2452, inpsections 970.479.2149 ADD /ALT MF BUILD PERMIT Permit #: B10 -0017 Project #: PRJ08 -0279 Job Address: 352 E MEADOW DR VAIL Status .. : ISSUED Location......: UNIT 303, VAIL MOUNTAIN LODGE Applied ..: 02/17/2010 Parcel No....: 210108255007 Issued ...: 08/25/2010 Expires. 10/12/2010 OWNER ANGELO, JOHN M. & JUDITH H. 02/17/2010 IN CARE OF NAME ANN REILLY BISHOP ESQ PO BOX 820 VAIL CO 81658 APPLICANT GEORGE SHAEFFER CONSTRUCTION 02/17/2010 Phone: 845 -5656 PO BOX 373 VAIL CO 81658 License: 302 -A CONTRACTOR GEORGE SHAEFFER CONSTRUCTION 02/17/2010 Phone: 845 -5656 PO BOX 373 VAIL CO 81658 License: 302 -A Description: ADDITION & REMODEL Occupancy: R2 Valuation: $1,763,336.00 Type Construction: I IA Total Scl Ft Added: 250 ................................................. ... »...,....,,.....x.......,,.. FEE SUMMARY .,..,,,...........,,,.......,..,.........,,,... ..,.,..,... »..,,.,...<.._,,,.., Building Permit Fee ------ > $8,397.35 Will Cal Fee --------------------- > $4.00 Total Calculated Fees ------------- > $49,396.35 Plan Check--------------- - - - - -> $5,458.28 Use Tax Fee --------------------- > $35,066.72 Additional Fees------------------ - - - - -> $9,966.25 Add'I Plan Check Hours -> $220.00 Restuarant Plan Review - - - - -> $0.00 TOTAL PERMIT FEES--------- - - - - -> $59,362.60 Investigation------------ - - - - -> $0.00 Recreation Fee------------ - - - - -> $250.00 Payments ------------------------------- > $59,362.60 Total Calculated Fees--- - - - - -> $49,396.35 BALANCE DUE ------------------------ > $0.00 DECLARATIONS I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plot plan, and state that all the information as required is correct. I agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure according to the towns zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town applicable thereto. REQUESTS FOR INSPECTIO SHALL BE MADE TWENTY -FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM AM - 4:00 PM. Signature o ct Date Print Name bld_a It_construction_pe rm it_041908 APPROVALS Permit #: B10 -0017 as of 08 -25 -2010 Status: ISSUED Item: 05100 BUILDING DEPARTMENT 03/08/2010 cg Action: CR SEE LASERFISCHE FOR COMMENTS 04/01/2010 cg Action: CR second check comments sent. see laserfische 04/15/2010 cg Action: AP approved corrected plans Item: 05400 PLANNING DEPARTMENT 03/03/2010 bgibson Action: AP plans routed to D1 04/15/2010 bgibson Action: AP staging plan approved, see conditions Item: 05600 FIRE DEPARTMENT 03/01/2010 mvaughan Action: AP 1. Impairment plan must be approved prior to demo of existing sprinkler system in unit. 2. Staging plan for 75 ton crane must be approved prior to placement. 3. Separate fire alarm and sprinkler permits required for changes. 4. Asbestos plan recieved and approved. 05/13/2010 mcgee Action: AP Staging Plans Item: 05500 PUBLIC WORKS 04/15/2010 Martin Action: AP Per Leaonard See the Conditions section of this Document for any that may apply. bld_alt_constru ctio n_pe rm it_041908 CONDITIONS OF APPROVAL Permit #: B10 -0017 as of 08 -25 -2010 Status: ISSUED 4l RRRkk*## RRRk*# YIRRRtkY!# RRR**# RRRkk*### kk* kYktRkk* Yl i# kR* k## kkRR*## YikkkkY##1 kRRkkYWikkt* Yl i4R***#!#! Rk**### RkR*##### R**# ittRR**##1 4kk**###* kk*##### kR *k * #lRRRk *YY #4RkkkkY # #i *klrtk# Cond: 12 (BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE. Cond: 14 (BLDG.): ALL PENETRATIONS IN WALLS, CEILINGS, AND FLOORS TO BE SEALED WITH AN APPROVED FIRE MATERIAL. Cond: 1 (FIRE): FIRE DEPARTMENT APPROVAL IS REQUIRED BEFORE ANY WORK CAN BE STARTED. Cond: CON0011298 Prior to the release of this building permit, the applicant shall provide a fee -in -lieu payment in accordance with Chapter 12 -24, Inclusionary Zoning, to mitigate the employee housing mitigation need generated by a 250 square foot addition of GRFA. Cond: CON0011382 SPECIAL INSPECTION REPORTS REQURIED PER IBC CH. 17 Cond: CON0011383 Prior to construction, the applicant shall submit a Developer Improvement Agreement ensuring the revegetation of the areas of disturbance shown on the staging plan. In addition to the tree protection measures shown on the staging plant, the applicant shall construct a bridge /walkway at the southwest corner of the building to protect the root zones of the existing trees from compaction due to construction activities. bld_a It_constructio n_perm it_041908 TOWN OF VAIL, COLORADO Statement Statement Number: R100001156 Amount: $220.00 08/25/201011:16 AM Payment Method: Check Init: SAB Notation: 101258 GEORGE SHAEFFER Permit No: B10 -0017 Type: ADD /ALT MF BUILD PERMIT Parcel No: 2101 - 082 - 5500 -7 Site Address: 352 E MEADOW DR VAIL Location: UNIT 303, VAIL MOUNTAIN LODGE Total Fees: $59,362.60 This Payment: $220.00 Total ALL Pmts: $59,362.60 Balance: $0.00 ACCOUNT ITEM LIST: Account Code Description Current Pmts -------------- - - - - -- ------------------------------ PF 00100003112300 PLAN CHECK FEES 220.00 r GEORGE SHAEFFER CONSTRUCTION COMPANY P.O. Box 373 VAIL, COLORADO 81658 TO: Chris Gunion Vail Town of 75 South Frontage Road Vail, CO 81657 Voice #: 970 - 479 -2138 Fax #: 970479 -2452 Email: cgunion @vailgov.com WE ARE SENDING YOU ®Attached ❑ Shop drawings ❑ Prints ❑ Copy of letter ❑ Change order LETTER OF TRANSMITTAL DATE August 18, 2010 JOB NO. 0921 BP 10 -0017 Angelo Grand Annex Project Master Bedroom Fireplace Submittal ❑Under separate cover via ❑ Plans ® Copies the following items: ❑ Samples ❑ Specifications COPIES DATE NO. DESCRIPTION 1 8/18/10 1 Opgs Stamped Letter from Rader Engineering 1 7/23/10 7pgs EuroFocus 950 1 7/23/10 Ipg Vancouver Gas Fireplace Written Spec 1 7/23/10 2pgs Chimney Fan Spec 1 7/23/10 Ipg Chimney Adapter Spec 1 7/23/10 2pgs Universal Control Wiring Schematic 1 7/23/10 3pgs Universal Control Spec 1 7/23/10 1pg Dual Purpose Air Switch 1 7/23/10 7pgs Intermittent Pilot Retrofit Kit Spec THESE ARE TRANSMITTED as checked below: ® For approval ® For your use ❑ As requested ❑ For review and comment ❑ FOR BIDS DUE REMARKD: Please Find Attached COPY TO: ❑ Approved as submitted ❑ Approved as Noted ❑ Returned for corrections El D r���od� (�I AUG 18 2010 � TOWN Or VAiL ❑ Resubmit copies for approval ❑ Submit copies for distribution ❑ Return corrected prints ❑ PRINTS RETURNED AFTER LOAN TO US Town of Veil OFFICE COPY SIGNED: George Shaeffer Construction Companj If enclosures are not as noted, kindly notes us at once. Version 1.0 &,b -- 6(7 HA ERZO ENGINEERING • COMFORT SYSTEMSM PO BOX 8610 • AVON, CO 81620 • Telephone 970 -845 -7910 Fax 970 -845 -7522 • E -mail drader @raderengineedng.com LETTER OF TRANSMITTAL To: Dennis Thompson From: Drew Rader George Shaeffer Construction Date: 8/18/10 Job Name: Angelo Grand Annex Job Number: 9071.00 Type of Delivery: ❑ US Mail ❑ UPS ❑ Fax ❑ FED EX Attached: ❑ Shop Drawings ❑ Progress Prints Copies Date Drawing Number(s) 3 8/18/10 Transmitted: Reimbursables: Remarks: Copy To: -file ❑ For Approval ® For Your Use ❑ Revise And Submit Size ❑ 24x36 ❑ 30x42 ❑ Drop -off ❑ OSM ® Pick -up ❑ Email ❑ CAD files ❑ Plot files ® Other ❑ PDF files Description Fireplace submittals Quantity Plots Blueprints Signed: ❑ Reviewed ❑ As Requested ❑ Rejected ❑ Originals ❑ Copies HA EHZ' ENGINEERING • COMFORT SYSTEMSM PO BOX 8610 • AVON, CO 81620 • Telephone 970 -845 -7910 Fax 970 -845 -7522 • E -mail drader @raderengineedng.com 8/18/10 Ms. Jane Snyder Mosaic Architects 1829 Pearl Street Boulder, CO 80302 Re: Angelo Grand Annex Master Bedroom Fireplace Vail Mountain Lodge Vail, CO REI Job No. 9071.02 Dear Jane, We have reviewed the submittals for the gas fireplace to be installed in the Master Bedroom of the Angelo Grand Annex. The submittals provided by Vancouver Gas Fireplaces include fireplace elevation, fireplace sections, burner details, exhaust fan specifications, wiring schematic and UC 1 interlock relay and air proving switch. I have also spoken directly with the technical representative from the Vancouver Gas Fireplaces about the retrofit, testing and operation of this fireplace. Based on our review of the provided information it is our opinion that the integration of these components as shown on the submittals will provide a safe fireplace installation. We approve these submittals. Please let me know if you have any questions. Sincerely, J. Drew Rader P.E. 290 'o )$ ƒ\ \� }+«) )�k/ { \(({ { / \ {\ \ \ � { Elevation Scale ] » ]' CO \ \ ` ) { _ f ƒ§ /ƒ# L) . }( /> Section Through Scale 1 "= V -0" 20 r; PILOT IGI IF AIR C FIREPLACE io 0 cfl SAND, DECORATIVE LOGS ON TO ( NOT SHOWN FOR CLARITY) IF BURNER PAN OUTLINED IN RED SEALED GLASS FRONT Contractor Name and Address sn..r Copyright reserved. The design and related documents are the exclusive property of Eurof Eurofocus950 Vancouver Gas Fireplaces. The are for the use of this D.I. p y project and cannot be used for any July 08/2010 O other purpose without the prior written consent of Vancouver Gas Fireplaces. Prior to George Shaeffer Construction. nue commencement of the Work, the Contractors) shall determine and verify all field Vancouver Gas Fireplaces measurements and field conditions, product requirements; catalogue numbers and similar data; and shall check and coordinate each document with the requirements of the Work and of 235 West 7th Avenue P.O Box 373 page Thle - -- the Contract Documents. The Contraclor(s) shall identify any Vail. Co 81658 ¢'rots and omissions and ascertain an discrepancies between the drawings and the Work and Vancouver, British Columbia y p g V5Y1 L9 Section Through Contract Documents and bong these items to the attention of Vancouver Gas Fireplaces for clarificafon. Written dimensions shall take precedence over scaled dimensions. 10 3/4" VENTING AS PER MANUFACTURERS MANUAL 115VAC power supply with On /Off switch to operate fireplace. Switch can be located anywhere within fireplace site. 00 Custom pan and Uninterrupted 115VAC constant burner see page Accessible interlock power supply Ucl Interlock 04 for details control. location to Control. be determined. 115VAC rated wires route from Ucl to Fan location an Support Qunction box) ----- - - - - -- - - - - -- - -- - -' & Gas line, ignition wim and pilot j 14 / 2 dry contact wire tubing routed from b rner O from Ucl connected Switch ` — to gas valve. see page 07 for installed below J complete wiring schematic - - -- - !--------------- - - - - -= Exhaust Fan. Roof location) as required for firep ce set -up. Approved 115VAC Signal to transformer 6" Air intake Cross Section Scale 1"= 1' -0" �P Ja��o c' m ��LLa =- m8m mom mt2. mm mn8` =3re° - E o> n _8 7 o sNomo. E.Y m L m PF O Y Qp O U m t r3amn�° n _ c E o Zm3� uo��3 m(7m me NTio 0 p� t U>o O m mO o o m EaSmUu �_.Ce) o O o U s Un UU N dw' c5 - U m a 9 Q 9 m 5 � _ m U o E � m� = m o= o y a U m U U' a U E <0 d m O .- w d w m N Q (4 r m 0 LO O } Cross Section Ignition Detail t9ne Ionaµ screw I 16 gauge we welded pen \Pa. tubing and Ignition wee. Gas from vahe Maximum T length Burner Details Scale 1'/2 "= 1' -0" 0 -- 28 3/4" Top View IGNITION PILOT Schedule 40 Pipe burner N Cross Section SAND 1" SUPPORT LEGS AIR GRILL SCH40 BLACK STEEL BURNER 16GA FULLY WELDED BLACK STEEL PAN WITH HEMMED EDGES Contractor Name and Address P-1— sMN Copyright reserved. The design and related documents are the exclusive property of Eurofocus950 Vancouver Gas Fireplaces. The are for the use of this V • •� ' itu. eplace y project and cannot be used for any July 0812010 ,f other purpose without the prim written consent of Vancouver Gas Fireplaces. Prior to George Shaeffer Construction. 04 commencement of the Work, the Contractor(s) shall determine and verity all field Vancouver Gas Fireplaces 'n"e measurements and field conditions; product requirements; catalogue numbers and similar 235 West 7th Avenue P.O Box 373 Pa data; and shall check and coordinate each document with the requirements of the Work and of Page Title the Contract Documents. The Contractor(s) shall identity any Vancouver, British Columbia Vail, Co 81658 errors and omissions and ascertain any discrepancies between the drawings and the Work and V5Y1 L9 Burner Details Contract Documents and bring these items to the attention of Vancouver Gas Fireplaces for clarification. Wrf(ten dimensions shall take precedence over scaled dimensions. EXHAUSTO RS -009 DRAFT INDUCER AIR PROVING SWITCH (WHITE RODGERS 770 -3) 14 / 2 DRY CONTACT WIRE ROUTED FROM FAN LOCATOOI' TO INTERLOCK CONTROL SEE WIRING SCHEMATIC; FOR DETAIL: VENTING FROM FIREPLACE BELOW EXHAUSTO FR -2008 STEEL ADAPTER TO HOLD FAN IN PLACE JUNCTION BOX TO EXHAUST FAN POWER FROM LOAD TERMINALS AT Uc1 LOCATION. SEE WIRING SCHEMATIC FOR DETAILS. Contractor Name and Address ".1—' sr».r Copyright reserved. The design and related Documents are the exclusive property of -- Eurofocus950 Vancouver Gas Fireplaces. They are for the use of this project and cannot be used for any pair, other purpose without the prior written consent of Vancouver Gas Fireplaces. Prior to July 08/2010 05 commencement of the Work, the Contractor(s) shall determine and verify all field Gas Fireplaces George Shaeffer Construction.. T measurements and field conditions; product requirements; catalogue numbers and similar data; and shall check and coordinate each document with the requirements of the Work and of 235 West 7th Avenue P.O Box 373 page Tale the Contract Documents. The Contractor(s) shall identify any Vail, Co 81658 errors and omissions and ascertain an disae ancies between the drawings and the Work and Vancouver, British Columbia y p g V5Y1 L9 Fan Details Contract Documents and bring these items to the attention s Vancouver Gas Fireplaces for clarification. Written dimensims shall lake precedence over scaled dimensions. GAS VALVE TRAIN AND ORIFICE SET -UP - FOR NATURAL GAS BURNERS EXPLODED VIEW / 2 "THREADED PIPE SEE WIRING TO MAIN BURNER SCHEMATIC ' /z "- 3/8" REDUCING COUPING BRASS ORIFICE Iff THREADED INSID 3/8" X 3/8" 19 TO ACCEPT ORIFI BRASS FITTING TO HOUSE ORIFICE� ' /z"- 3/8" REDUCING COUPING '/z "MALE X/2"'� FLAIR BRASS FITTING '/2 "FLEX CONNECTOR PILOT H PILOT ORIFK' H �} BREAK -OFF FITTING PILOT TUBI Nal PILOT TUBING PILOT FITTING TO GAS VALVE Irel Win SPARK IGNITOR AND PILOT FLAME SENSOR ENSURE THAT ALL COMPONENTS ARE INSTALLED AND THAT PILOT TUBING IS PROPOERLY SEATED REGULATOR (IF REQUIRED) NO MORE THAN 2LB REG. AT FIREPLACE LOCATION SHUT -OFF VALVE GAS LINE IN Contractor Name and Address yr J_ srro.r Copyright reserved. The design and related documents are the exclusive property of Eurofocus950 Vancouver Gas Fireplaces. They are for the use of this project and cannot be used for any ` ( July 08/2010 0 other purpose without the prior written consent of Vancouver Gas Fireplaces. Prior to July 06 George Shaeffer Construction. TaN commencement of the Work, the Contractor(s) shall determine and verify all Feld Vancouver Gas Fireplaces measurements and Geld conditions; product requirements; catalogue numbers and similar data, and shall check and coordinate each document with the requirements of the Work and of 235 West 7th Avenue P.O Box 373 page Title the Contract Documents. The Contractor(s) shall identify any Vail, Cc 81658 errors and omissions and ascertain an discrepancies between the drawings and the Work and Vancouver, British Columbia y p 9 V5Y1 L9 Natural Gas Valve Set -Up Contract Documents im bring these items to the attention a over s Vancouver Gas Fireplaces for dad6cation. Written dimensions shall take precedence over scaled dimensions. --- ----- -------- ----- ------- -1 I I I I I I I I I iam 1 I I s gnition MEHKA� i Iodule I 1 I I I I 1 nnn �aucx n RED WHITE BLUE RED WHITE BLUE 110VAC Fireplace Switch r -- I t I I I Separate interrupted power supply with On /Off switch at fireplace location VAC 50160 H� Constant power supply to fireplace POWER DPLY BLOCK location LOCATION TO BE DETERMINED On / Off Switch - -- ----------------------------- Y W I 2 m 3 —11 —T . s® sZ a,.oE al nrs< ...as III I J l I I 1 _ � I I I I I ' Contractor Name and Address E. EurWocu5950 Slwl 24V Copyright reserved. The design and related documents are the exclusive property of - c ransformer ' I Vancouver Gas Fireplaces. They are for the use of this project and cannot be used for any O o � ' I � 0 I I I I jatrburne 1 ' 1 I rW- 1 1 1 I 1 1 I WHITE I I I I 1 I I I I P.O Box 373 — — — — — — — — — — — — — — — — — — — — — — — — — — — — BLACK Vail, Cc 81658 erors and omissions and ascertain any discrepancies between the drawings and the Work and I RED LOCATED IN ASH ROOF LOCATION > PAN - SEE SHOP V5Y1 L9 I Capacitor & DRAWINGS. Junction box I I MOTOR P Il,, T . f 1 H. MAX Q 115 VAC = LIC-1 Interlock Control Variable 14 / 2 DRY CONTACT Speed Switch WIRES I ---- ---------------- - - - - -- Kill Exhausto Switch RS -09 Power fan BLACK GREEN Normally open terminal Common terminal AIR PROVING SWITCH_ (WHITE RODGERS 770 -3) Contractor Name and Address E. EurWocu5950 Slwl Copyright reserved. The design and related documents are the exclusive property of - Vancouver Gas Fireplaces. They are for the use of this project and cannot be used for any July 0812010 0 other purpose without the prior written consent of Vancouver Gas Fireplaces. Prior to commencement of the Work, the Contractors) shall determine and verify all field George Shaeffer Construction. rlw field Vancouver Gas Fireplaces measwements and conditions; product requirements; catalogue numbers and similar data; and shall check and coordinate each document with the requirements of the Work and of 235 West 7th Avenue P.O Box 373 Page TWe the Contract Documents. The Contractar(s) shall identify any Vancouver, British Columbia Vail, Cc 81658 erors and omissions and ascertain any discrepancies between the drawings and the Work and Wiring Schematic Contract Documents and bring these items to the attention of Vancouver Gas Fireplaces for V5Y1 L9 clarification. Written dimensions shall take precedence over scaled dimensions. 3932001 12.04 Product Information EXHAUSTO Chimney Fan RS 009 =016 Description Mechanical draft fan for installation at the chimney termination point, vertically or for side -wall venting. Assures a negative pressure in the entire chimney or stack system. Discharges horizontally (vertically, if side -wall vented) at a high velocity. The fan housing is hinged and the top can be opened for easy service and access to stack. For use with gas, wood, coal, pellets, oil, and others. Material Housing is made of cast aluminum with a thickness of 3/16" and is extremely corrosion resistant. One coat of grey hammerpaint finish is applied. Axial vanes in stainless steel, dynamically and statically balanced to assure low noise level and vibration -free operation. Motor Split capacitor, totally enclosed. Class H insulated, IP54 Protection Class. Sealed ball bearings. Variable Approvals Speed. Thermal overload protection. CE Compliant Standard Equipment City of New York Department of Building 2 "x4" or 4"x4" junction box with cover and conduit City of Los Angeles Fiber Mat and Mounting Brackets The Commonwealth of Massachusetts (G1- 1295 -29) Bird Screen Warranty 5 Amp Fan Speed Control 2 -year factory warranty on entire fan. Optional Equipment Fan Proving Switch EFC211 Fan Control and Safety Control Listings ETL listing #E109205550D UL378 - Draft Equipment CSA- CAN3- B255 -M81 - Mechanical Flue Gas Exhausters 10 -year warranty against corrosion perforation. Manufactured at IS09001 certified plant. EXHAUSTO 3932001 12.04 Specifications Product Information Capacity PS (inW.C.) 1.( 0.< 0.£ 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 L eau auu 150 1000 1250 1500 1750 2000 Volume (cfm) 5 1 Junction Box 2 Conduit/cord 3 Motor 4 Motor Housing 5 Cooling Plates 6 Bird Screen 7 Base Plate 8 Locking Nut 9 Inlet 10 Axial Vane 11 Hinges 4 1 Sound Diagrams 1 Model RS 009 RS 012 RS 014 RS 016 125Hz 54 64 75 81 Lw dB (measured 250Hz 50 60 69 76 500Hz 47 55 65 72 in accordance 10o0Hz -4- 3 52 62 with 2000Hz 38 48 57 64 ISO 3744) W4234 P - us.exhausto.com EXHAUSTO Inc. 1200 Northmeadow Pkwy. Suite 180 F: 770.587.4731 P: 770.587.3238 EXHAUSTO T: 800.255.2923 Roswell, GA 30076 info @exhausto.com us.exhausto.com :. vancou v e r V gas t. 604 732.3470 I f. 604 732.5729 235 west 7th avenue • vancouver, be v5Y 1L9 www.vangasfireplaces.com GEORGE SHAEFFER CONSTRUCTION FIREPLACE SPECIFICATIONS Fireplace Location — Designated location for the fireplace as outlined per manufacturers manual. Controls Location - Gas Valve, Ignition Module and Transformer are to be located underneath the fireplace in ash tray compartment. — see shop drawings for details. Interlock control and adjustable fan switch location to be site determined. Fireplace — Fireplace body is to be Eurofocus model 950. See fireplace specifications in Eurofocus manual. Fireplace is to be retrofitted to house one custom fabricated pan and burner for use with natural gas. — See shop drawings for details. Exhaust venting - The exhaust vent is to be as per fireplace manufacturer manual. Air intake — Air intake is to be 6" or equivalent as required per fireplace manufacturer. Air intake is to be brought into fireplace from piping below — see shop drawings for details. Air intake is to be passive. Gas Supply - A maximum of 50,000 BTU /hr is required at inches pressure to the fireplace location. No more than a 21b regulator to be installed. Ignition control and valve — Electronic ignition and valve is to be HY- Y8610U6006 intermittent ignition system complete with a HW- AT20B1O56 120/24 transformer. Ignition module and valve is to be mounted, wired and gassed on site. Gas shut off should be located directly in front of the valve on the gas feed. Interlocking control - Interlocking control for proving pre and post purge is to be Tjernlund UC1 Control box. See wiring schematic for wiring details. Pilot assembly — Pilot assembly is to be Honeywell HW- Q345A1313 connected with JC- Y99AR-1 %" pilot tubing. Pilot assembly is to be installed into burner pan and removable for servicing / replacement. Exhaust power vent - Power vent is to be Exhausto RS009, with FR2010 steel adaptor to accept 10 "ID Vent. Adjustable rheostat control is to be installed in power line to fan at interlock control location — see wiring schematic for details. Proving switch (White Rodgers 770 -3) is to be located close to exit point of exhaust vent run. Burner Pan & Burner - The burner pan is to be custom fabricated, fully welded, 16 gauge steel with a hemmed edge. The pan approximate dimensions is to be 28 %" x 19 3/" x 19 3/" Pan is 2" deep. The burner is to be approx 10" x 6" having triangular shape and sit in the centre of the burner pan. 1/8" holes are to be drilled into bottom of burner, spaced 2 1/4" apart to set flame pattern. Pilot assembly is to be installed adjacent of the burner. A 3" tail, with the bottom 1%" threaded, to be welded to burner pipe to allow for gas connection from below. Burner pan is to be filled with silica sand and cement logs are to be placed on top of the sand. The gas line to the burner as well as the pilot tubing and ignition wire are to be fed through the fresh air portion of base of the Eurofocus 950 fireplace from the controls location in the ash tray. Pan and burner dimensions are to be adjusted and verified upon delivery of Eurofocus950. Electrical requirements - Electrical requirements as per wiring schematic. "Expect Glowing Results" 3932001 12.04 Product Information EXHA V STO Chimney Fan RS 009 -016 Description Mechanical draft fan for installation at the chimney termination point, vertically or for side -wall venting. Assures a negative pressure in the entire chimney or stack system. Discharges horizontally (vertically, if side -wall vented) at a high velocity. The fan housing is hinged and the top can be opened for easy service and access to stack. For use with gas, wood, coal, pellets, oil, and others. Material Housing is made of cast aluminum with a thickness of 3/16" and is extremely corrosion resistant. One coat of grey hammerpaint finish is applied. Axial vanes in stainless steel, dynamically and statically balanced to assure low noise level and vibration -free operation. Motor Split capacitor, totally enclosed. Class H insulated, IP54 Protection Class. Sealed ball bearings. Variable Approvals Speed. Thermal overload protection. CE Compliant Standard Equipment City of New York Department of Building 2 "x4" or 4 "x4" junction box with cover and conduit City of Los Angeles Fiber Mat and Mounting Brackets The Commonwealth of Massachusetts (G1- 1295 -29) Bird Screen 5 Amp Fan Speed Control Optional Equipment Fan Proving Switch EFC211 Fan Control and Safety Control Listings ETL listing #E1 09205550D UL378 - Draft Equipment CSA- CAN3- B255 -M81 - Mechanical Flue Gas Exhausters Warranty 2 -year factory warranty on entire fan. 10 -year warranty against corrosion perforation. Manufactured at IS09001 certified plant. ExHAUSTO E] 3932001 12.04 Product Information Specifications Model RS 009 1 RS 012 1 RS 014 1 RS 016 Discharge Horizontal Fan Type Axial Vane Motor Type Totally enclosed, Variable speed, Class H Voltage VAC 1x120 RPM 1600 Amperage Amps 0.5 1.2 1.4 3.9 Motor Output HP kW 1/30 1/10 1/7 113 0.025 0.08 0.1 0.25 Weight lbs. kg 29 37 47 61 13 17 21 28 Dimensions A in mm B x B in mm C in mm D in mm E in mm 10.0 11.0 13.2 18.0 250 275 330 450 12.0 14.6 16.8 19.2 300 365 420 480 11.4 14.0 15.8 18.0 285 350 395 450 3.0 3.4 4.0 1 4.0 75 85 100 100 8.0 11.0 12.0 14.0 203 275 300 350 Temperature Rating Interm. Cont. 575 °F /300 °C 482 °F /250 °C Capacity PS (M.C.) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 250 500 750 1000 1250 1500 1750 2000 Volume (cfm) i I q' i 0>� EXHAUSTO Inc. P: 770.587.3238 1200 Northmeadow Pkwy. F: 770.587.4731 Suite 180 T. 800.255.2923 Roswell, GA 30076 info ®exhausto.com 20001-1z us.exhausto.com 5 1 Junction Box 2 Conduit/cord 3 Motor 4 Motor Housing 5 Cooling Plates 6 Bird Screen 7 Base Plate 8 Locking Nut 9 Inlet 10 Axial Vane 11 Hinges d r 3 a Sound Diagrams 1 Model Lw dB (measured in accordance with ISO 3744) Lp 125Hz F25OHz 500Hz 1000Hz 20001-1z 4000Hz 80001-1z dB(A) RS 009 54 50 47 43 38 31 25 21 RS 012 64 60 55 52 48 42 34 30 RS 014 75 69 65 62 57 51 44 41 RS 016 81 76 72 69 64 58 52 47 EXHAUST® ■xwausio PRODUCT INFORMATION EXHAUSTO Steel Chimney Adapter SCA Description EXHAUSTO Steel ChimneyAdapter is used when installing the EXHAUSTO chimney fan on the top of a single, double or triple wall steel chimney. The adapter is designed to slide into the steel chimney for a tight fit. The outer diameter of the collar is 1/8" smaller than the inner diameter of the steel chimney, and has a 5" deep collar. Material The steel chimney adapter is made of 16GA, 304 stainless steel. Warranty 2 -year factory warranty Specifications 3912001 07.02 OD Bead of silicone Fan Type Flange VENT Diameter Dimension 5" 6„ 7" 8" 9" 10" RSV 009 9.4" x 9.4' (240 x 240 mm) FR1005 FR1006 FR1007 FR1008 RSV 012, GSV 012, RSV 200, GSV 200, RS 009 12.2'x 12'2' (310 x 310 mm) FR2006 FR2007 FR2008 FR2009 FR2010 6" 8" 9 „ 10" 12" 14' RSV 014, GSV 014, RSV 250, GSV 250, 15.6"x 15.6' (395 x 395 mm) FR3006 FR3008 FR3009 FR3010 FR3012 FR3014 RS 012, RS 014 RSV 016, GSV 016 19.7" x 19.7" 8" 10" 12" 14" 16" 18" 20" 22" 24" RSV 315, GSV 315, (500 x 500 mm) RSV 400, GSV 400, FR4008 FR4010 FR4012 FR4014 FR4016 22,1" x 22.1" RSV 450, GSV 450, (562 x 562 mm) FR4018 RS 016 24.5"x 24.5" (622 x 622 mm) FR4020 26.5" x 26.5" (673 x 673 mm) FR4022 28.3" x 28.3" (718 x 718 mm) FR4024 s are subject to chanae without noting EXHAUSTO1200 N (770) 587 -3238r (800) 255 -2923 Fax (7710) 87 -47318 info@exhausto.com us.exhausto.com UC1 UNIVERSAL CONTROL WIRING SCHEMATIC The Ground lead, Venter motor and Fan Prover leads are factory connected to the UC1 circuit board. Venter Ground, motor and Fan Prover wiring connections are made at the free end of the 2 foot whip. LEGEND: 115 VAC — — — — 115 OR 24 VAC FROM CALL JUMPER 24 VAC OR USER - PROVIDED VOLTAGE FROM TERMINAL 3 TO 4 WITH CALL — — — — 5 VDC BOARD - GENERATED POWER JUMPER REMOVED DO NOT SUPPLY POWER! DO NOT SUPPLY VOLTAGE TO "A" OR "B ". USER - PROVIDED CALL SWITCH Not used-DR Y- C —OR- Switch LINE HOT OR 24 VAC NEUTRA COMMON 24V Transformer •- - — APPROVED — — SUPPLY — Constant 11 OV 115 VAC 50/60 Hz Power Vent Fan IMPORTANT- RED JUMPER POSITION MUST BE THE SAME AS APPLIANCE INTERLOCK VOLTAGE. LEDS LEDA LED3 LED2 LED7 cn (� � 0 ❑ ❑ ❑ ❑ ❑ < < ;U ;0 0 G) D CALL ° ° m m m J2 JUMPE ;U R Z Z ro ® J1 ICOM ® - _ INTERLOCK 3 RELAY r -Ca=m ft NO Z XN ' i[® L z ' N pmt MOTOR �°? 8 coM 1 H.P. MAX @ 115 VAC (n z M MOTOR ° . -- b RELAY NO SETTINGS r a m POST -PURGE SETTINGS 1.- (3 8) -4 OPEN PROVER (9) Pressure 15D- Switch PROVER z FOR TJERNLUND MAC1 E OR MAC4E -n ® AUXILIARY DEVICES. DO NOT CONNECT POWER TO P1, P2, C, GND OR F. DOING SO WILL DAMAGE THE CONTROL. J D/N 1303958 -1 WARNING: Disconnect power supply from the UC1 and heating equipment when making wiring connections and servicing the Venter. Failure to do so may result in personal injury and /or equipment damage. LED #5 (RED) should be off with power removed. 5 DIP SWITCH NUMBERING Pre -Purge t no ON 1 2 Post -Purge no 0 � �nn 3 4 5 6 7 8_ POST -PURGE SETT t DODGED ON 3 4 5 6 7 8 0 Seconds T HEDGE O. 3 4 5 6 7 8 Minutes t ON Prover Status Check Activated no 'INGS (SEE "POST -PUR( D00000 3 4 5 6 7 8 30 Seconds noupouopo 3 4 5 6 7 8 8 Minutes -OF ABOVE PRIOR TO SETTING) no E no on no no no n. 00-1 0 0 0 3 4 5 6 7 8 3 4 5 6 7 8 1 Minute 2 Minutes HHODE 3 4 5 6 7 8 16 Minutes E -PURGE SETTINGS (SEE "PRE- PURGE" ON PAGE 3 PRIOR TO SETTING PRE - PURGE) Do m o 1 2 1 2 0 Seconds 5 Seconds no m 1 2 20 Seconds Fl Fl 1 2 35 Seconds III I Ili TJERNLUND PRODUCTS, INC. T1601 Ninth Street • White Bear Lake, MN 55110 -6794 PHONE (800) 255 -4208 • (651) 426 -2993 • FAX (651) 426 -9547 pr Visit our web site • www.tjerniund.com UNIVERSAL CONTROL MODEL UCI HIGHLIGHTS Over time, Tjernlund Products has developed a variety of built -in and accessory interlock controls to match the needs of different boiler, furnace, and water heater control systems. As the years went by we expanded the number of power venter models to include a variety of these interlock controls. This led wholesalers to stock those versions that sold best in their market and special order those variations of the same size power venter that included a different type or voltage control system. In order to simplify product selection, and at the same time update our products with a host of new features, we are introducing a new Universal Control (UC1). It will be the standard interlock used for all of our products with a motor horsepower rating of 1 HP and less. The Universal Control (UC1) interlocks mechanical draft and combustion air systems with gas /oil fired heat- ing equipment. It can be activated by any 18 -130 VAC heater control signal or by a pressure switch or relay using the 5 VDC Control supplied dry contacts. The UC1 features: Adjustable pre & post purge LED status /diagnostic indicators Selectable voltage to avoid false triggering by electronic burner controls Prover switch check circuit to verify that the fan prover switch is open prior to operation A 10- second prover switch delay to eliminate burner start up or wind induced prover switch short cycling A 5 VDC Control supplied fan prover signal that isolates the burner load circuit from the prover switch circuit As of July 22, 2002 the following revised models will incorporate the UC1 as their standard interlock control: HSJ, HS1, HS2, HS3, HS4, HS5 SS1, SS2 (In addition the SS2 also gets a new fan prover) The following models will be discontinued after July 22, 2002: HS115 -J, HS115 -1, HS115 -2, HST -J, HST -1, HST -2, GPAK -J, GPAK -1, GPAK -JT, GPAK -1T & SS2G. The models HSUL -J, HSUL -1, & HSUL -2 will still be available through 2002. The UC1 will be the standard (optional) accessory interlock control for the following models: DJ -3, D -3, I, IL, XL (These models will still require the PS1505 Fan Proving Switch) PAI -3, PAI -4, PAI -5, PAI -6, PAI -7 Interlocking the UC1 with multiple or millivolt appliances: New millivolt and multiple heater interlock controls that end with "E" will be similar to previous versions, but designed to easily interface with the UC1 control. To interlock with one additional 24/115 VAC heater add the new MAC -1 E. It is a stripped down auxiliary board version of the UC1 and is powered by and communicates with the UC1 through a factory-wired whip. To interlock with a millivolt water heater only, add the WHK -E water heater interlock kit. To interlock a millivolt water heater and a 24/115 VAC furnace or boiler, add the WHK -E and the MAC -1 E. To interlock more than two 24/115 VAC heaters add the MAC -4E for a total of up to 5 heaters. It is powered by and communicates with the UC1 through a factory wired whip. UC1 Universal Control Power Power venter, �- Draft Inducer ([ • or Combustion Air Ei In- Forcer �',� s Superb Perform nc • Adjustable pre and post purge • LED status /diagnostic indicators • Selectable voltage avoids false triggering by electronic burner controls • Prover switch check circuit verifies fan prover switch is open prior to operating CIrCU Furnace / Boiler 1 Water Heater Sa a Features: ® 10- second =prover switch delay eliminates bum6i� start up or wind induced prover switch short cycling ■ 5 VDC fan prover signal eliminates issues with switching burner load through prover switch contacts Contractor ,. ractical Benefits ■ Eliminates appliance control circuit ■ Simplifies Tjernlund Power Venter model compatibility issues since the UC1 inter - selection. locks with dry contact, 24 VAC or 115 VAC appliance control systems. Appliance ■ Simplifies new installations and service control circuit voltage can be selected, calls since operation and wiring interlock problems are diagnosed and displayed eliminating false triggering by burner check circuits. through LED indicators. ■ Simplifies servicing and new installations. ® Reduces liability with prover status check Universal Control can replace any relay or circuit. timer /relay previously installed. ■ Simplifies on -truck inventory. ■ Allows installer to position junction box for easy wiring and service. Typical Installations UC1 Universal Control New HSJ, HS1 & HS2 includes UC1 Control New HS3, HS4 & HS5 includes UC1 Control In -Line Draft Inducers with SideShot® Model SS1 & SS2 optional UC1 Control and includes UC1 Control PS1505 Fan Proving Switch (Note: New Fan Prover for SS2) UC1 Electrical Schematic LEGEND: 115 VAC — — — — — 115 0124 VAC FROM CALL JUMPER 24 VAC OR USER- PROVIDED VOLTAGE FROM TERMINAL 3 TO 4 WITH CALL 5 VOC BOARD - GENERATED POWER JUMPER REMOVED DO NOT SUPPLY POWERI IMPORTANT: DO NOT SUPPLY VOLTAGE RED JUMPER POSITION MUST BE THE SAME TO'A'OR'S'. AS APPLIANCE INTERLOCK VOLTAGE. / Nc ccM USER-PROVIDED _ CALL SWITCH OO O� �G C� GC C ❑ OO ANDiOR N —J 'DRY' L _ _�- _ D J2 CALL RETURN JUMPER �- LIMIT pRERIRGE SETTNOS ON i � �' :LINE _ HOT PROVER 1.15VAC OR 24VAC a ®•..J1 L�NTERL-11 NEUTRAL— COMMON u POS-,;RGE SETNNGS �!m FOR TJERNLUND 4- - - - - APPROVED - - a el z MAC -tE OR MAC -aE SUPPLY � �L... 15VAC ' PROVER START J OPTION ¢ AUXILIARY DEVICES. 50,'60 Hz Z XN '9! " DO NOT CONNECT POWER TO Pt, P2, C, Z GND OR F. DOING QQ$Mm SO WILL DAMAGE MOTORC ; `coN THE CONTROL 1.—P MVt I. 15VAC RDELQYR New MAC -4E Multiple Appliance Control with UC1 Control (Interlocks up to 5 heaters) To interlock with one additional 24/115 VAC heater add the new MAC -1 E. It is a stripped down aux- iliary board version of the UC1 and is powered by and communicates with the UC1 through a factory wired whip. To interlock with a millivolt water heater only, add the WHK -E water heater interlock kit. To interlock a millivolt water heater and a 24/115 VAC furnace or boiler, add the WHK -E and the MAC -1 E. To interlock more than two 24/115 VAC heaters add the MAC -4E for a total of up to 5 heaters. It is pow- ered by and communicates with the UC1 through a factory wired whip. TJE LUN PRODUCTS, INC 1601 Ninth Street White Bear Lake, MN 55110 -6794 Phone: 651.426.2993 800.255.4208 Fax: 651.426.9547 Visit our website at www.Yemiund.com Copyright �Q 2002 Tjernlund Products Inc. ATI rlghts reserved P /N. 85CC004 4 DUAL PURPOSE AIR SWITCH �a 770 -1 "- 3-1/4 -»{ .771 i I x.647 I 7 7 m fV 1 -75/16 7/16- �?� ---�{I - 37/8 3.3/16 - WR DUAL PURPOSE AIR SWITCH Responds to Positive, Negative or Differential Air Pressure FEATURES • Design eliminates "fluttering" or malfunction due to shock or vibration normally encountered with "sail switches." • Wide operating range. • Furnished with one 6" piece 1/4" O.D. flexible tubing, nuts and ferrules. • Can be mounted in any position except upside down. • Enclosed diaphragm. SPECIFICATIONS Ambient Temperature ............... — 40 to + 180 °F Maximum Pressure ................ 1/2 PSI Agency .......................... U.L. listed and C.S.A. certified Model Number 770.1 770 -3 Operating Range 0.07 to 12.0 W.C. 0.07 to 12.0 W.C. n ;;tioT itch D SPDT Electrical Ratings Resistive Non - Inductive 120 VAC 15.OA 15.OA I 240 VAC 15.OA 15.OA 277 VAC 15.OA 15.OA AIR SWITCH APPLICATIONS 125 -277 VAC 300 VA 300 VA 66 4 Indicates Canadian Model Number www.white- rodgers.com LEGEND POWER HUMIDIFIERS NQ Negative Pressure QO Pressure Differential Switch permits unit to operate whenever there is proper air movement. © Positive Pressure ,Q, Pressure Sample Line P lSwitch ELECTRONIC AIR CLEANERS PROCESS DRYING _ " permits power to cleaner whenever blower of system is operating. - Switch monitors negative pressure to stop conveyor or process and provides alarm signal on fan failure. Ideal for bulk " chemicals, food processing, grain drying. 1 4-1 f � NATURAL DRAFT BURNERS Switch signals insufficient draft, provides safety limit to stop firing on lack of draft, o REFRIGERATION EQUIPMENT Switch responds to pressure drop across refrigeration coils to signal alarm condition starts again on sufficient draft. .� or automatically initiate or terminate defrost cycle. " INDUCED DRAFT BURNERS Proves operation I.D. DUCT STRIP HEATERS —� of fan by sampling Switch proves air movement across r— �{ol draft or air flow. Shuts off firing equipment 9 heaters by positive pressure to prevent on fan failure. burn -out on insufficient air flow. 66 4 Indicates Canadian Model Number www.white- rodgers.com Honeywell Y8610U Irte nt Pilot Retrofit Nt GENERAL The Y861 0U is a complete kit for converting conventional standing pilot systems to intermitent pilot systems. It is used on gas -fired atmospheric furnaces, boilers, and heating appliances. Not for use on direct vent, induced draft, or power burner equipment. Meets ANSI Z21.71 standard for automatic intermittent pilot ignition systems on central furnaces and boilers. FEATURES • Y861 0U kits can be used with either natural or LP gas. • The S861 0U ignition control provides a 90 second maximum ignition trial, shuts off, waits five minutes nominal, then re- initiates the pilot ignition sequence. The ignition trial, shutoff, and wait cycle repeat until the pilot lights or the call for heat ends. Each kit includes: — S861 OU Intermittent Pilot Module — VR8304M Dual Valve Combination Gas Control or VR8204A Dual Valve Combination Gas Control PRODUCT DATA — 392431 Igniter- Sensor — 394800 -30 Ignition Cable — 393691 Natural to LP Gas Conversion Kit — Wiring Harness — 393690 -14 Straight Flange Kit (3/4 in.) — Reducer adapters for gas control with VR8304M — Installation hardware Temperature Ratings: — S8610U: -40 °F to 165 °F ( -40 °C to 74 °C) — VR8304M: -40 °F to 175 °F ( -40 °C to 79 °C) — VR8204A: 0 °F to 175° F ( -18 °C to 79 °C) Intermittent Pilot Gas Ignition Control Module • Uses flame rectificat ion for flame sense • Internal spark generator lights pilot gas; main burner lights after pilot flame lights and proves • 100% shutoff of pilot and main gas if burner fails to light • Continuous retry ignition sequence prevents nuisance lockouts • Two LEDs indicate system status and flame signal strength Gas Control Valve • Straight through body pattern • VR8304M capacity is 270 ft3 /hr (7.6 m3 /hr) • VR8204A capacity with or without 1/2" x 3/4" adapter is 150 ft3 /hr (4.2 M3 /hr) • Manual ON -OFF valve blocks gas flow into the gas control when in the OFF position • Two main automatic valves: one solenoid- operated, and one a servo- operaled diaphragm system Igniter- Sensor • Single electrode made of Kanthal provides both ignition and flame sensing • Rated for 1775 °F (968 °C) at electrode tip; 1250 °F (677 °C) at ceramic insulator Contents GENERAL .. ............................... 1 SETTINGS .. .............................14 SPECIFICATIONS ....................2 CFECKOIIT ............................. 15 PLANNING THE OPERATION ............................16 INSTALLATION .........................6 TROUBLESHOOTING ............. 17 INSTALLATION ........................ 7 ANSI STAI` AMW .................22 i Automatic Ignition Systems ® ANSI Z21.20 sa- o2s1 -o1 Y861 0U INTERMITTENT PILOT RETROFIT KIT Table 1. S861OU Universal Intermittent Pilot Gas Ignition Control Module. Igniter- Sensor Type Valve Current Rating @ 24 Vac Prepurge Timing (field selectable) Trial for Pilot Ignition (field selectable) Ignition Sequence Type Ignition Sequence (After prepurge, if prepurge is selected) Integral Damper Connector Combination 1.0 A Pilot 0 (zero) or 30 15 or 90 Retry Spark and pilot gas ON until Included for use (one rod; and seconds; seconds; lightoff or trial for ignition ends. as needed. local flame 2.0 A Main sensing) 0 (zero) seconds 90 seconds If established flame is lost, trial If initially installed recommended recommended for ignition restarts immediately. and powered up If pilot fails to light, pilot gas and with damper spark turned off (100% shutoff). attached, unit After 5 minute delay, a new trial must always have for ignition is initiated. a vent damper This sequence continues until connected. lightoff or "Call for Heat" is removed. SPECIFICATIONS IMPORTANT The specifications given in this publication do not include normal manufacturing tolerances. Therefore, units might not match the listed specifications exactly. Also, units are tested and calibrated under closely controlled conditions, and some minor differ- ences in performance can be expected if those con- ditions are changed. Y8610U Intermittent Pilot Retrofit Kit Electrical Ratings: • Voltage and Frequency: 24 Vac, 60 Hz • Current Rating: 0.7A (includes both module and gas control) • Thermostat Anticipator Setting: 0.7A plus current ratings of other devices in the thermostat control circuit ORDERING INFORMATION S861OU Intermittent Pilot Gas Ignition Control Specifications Control Voltage: Line 24 Vac (18 -30 Vac) 50/60 Hz Trial for Ignition: See Table 1 above Prepurge: See Table 1 above Flame Failure Response Time: 2seconds maximum LEDs: The green Status LED provides system status and error codes The yellow Flame LED indicates flame presence and flame strength Operating Temperature: Minimum ambient temperature rating is -40 °F ( -40 °C) Maximum ambient temperature rating when used with 20 A main valve is 165 °F (74 °C) Relative Humidity: 0% to 95% non condensing Dimensions: See Fig. 2 on page 4. When purchasing replacement and modernizat ion products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further information, or would like to comment on our products or services, please write or phone: 1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory). 2. Honeywell Customer Care 1985 Douglas Drive North Minneapolis, Minnesota 55422 -3935 In Canada — Honeywell Limited /Honeywell Limitee, 35 Dynamic Drive, Toronto, Ontario M 1 V 4Z9. International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, Fran ce, Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A. 66- 0291 -oi Thermostat Compatibility: Compatible with any Honeywell 24V thermostat and with competitive 24V thermostats that are powered indepen- dently of the module. Transformer Sizing: Add current ratings of Y8610, vent damper, and any other control system components. Multiply this total by 24V to determine the transformer VA requirement. Mounting: Mounts in any position except with terminals up. Recom- mended mounting position is with terminals down to provide maximum protection from dripping water or dust accumula- tion. Refer to Fig. 14 on page 12. Fasten with No. 6 -32 machine screws or No. 8 sheet metal screws or 8 -18 x 5/8 pan head tapping screws of appropri- ate length. VR8204A and VR8304M Dual Valve Combination Gas Cont rols Specifications Y861 0U INTERMITTENT PILOT RETROFIT KIT Wiring Connections: — Between the module and gas control: 30 in. (762 mm) wiring harness with 1/4 in. quick- connect terminals. — Between the module and the igniter- sensor: 30 in. (762 mm) ignition cable with stud terminal and 1/4 in. quick- connect terminal. Terminals: 1/4 in. male quick- connects. S861OU has Molex plug for connection to a vent damper harness. Once the S861 0U has powered a vent damper, the module works only if the vent damper is connected. Table 2. VR8204A and VR8304M Dual Valve Combination Gas Controls Specifications. Model Capacitya Pipe Size Ambient Temperature Rating Dimensions VR8204A 150 ft3 /hr (4.2 m3 /hr); (with or 1/2 in. X. 1/2 in. NPT 0° to 175° F ( -18° to 79° C) See Fig. 4 on page 5 without 1/2"x 3/4" adapter) inlet x outletb VR8304M 270 0/hr (7.6 m3 /hr) 1/2 in. X. 3/4 in. NPT -40° to 175 °F ( -40° to 79 °C) See Fig. 3 on page 5 inlet x outlet a Based on 1,000 Btu /ft3, 0.64 specific gravity natural gas at 1 in. we pressure drop (37.3 MJ /m3, 0.64 specific gravity natural gas at 0.25 kPa pressure drop). b 3/4 in. straight flange included to provide 3/4" NPT outlet if needed. Mounting: Can be mounted from 0 to 90 degrees, in any direction, from the gas control upright position Pressure Rating: 1/2 psig (3.45 kPa) inlet pressure Terminals: 1/4 in. male quick- connect terminals Igniter- Sensor Specifications Model: 392431 Igniter- Sensor; includes igniter- sensor assembly, ground rod, and adapter (refer to Fig. 1 on page 4) Electrode /Flame Rod Material:Kanthal Maximum Temperature Ratings: Ground Rod Tip: 1775 °F (968 °C) Ceramic Insulator: 1250 °F (677 °C) Dimensions: See Fig. 5 on page 6. Mounting: Attach the supplied ground rod and adapter, which replace the thermocouple on the existing pilot burner 68- 0291 -01 Y861 0U INTERMITTENT PILOT RETROFIT KIT 392431 IGNITER - SENSOR ASSEMBLY GROUND Y' -� ROD j� S861OU INTERMITTENT PILOT MODULE WITH WIRING HARNESS VR8304 f r 1.uy f I A ALSO INCLUDED: +394800 -30 IGNITION CABLE (30 IN. (760 mm)) 393690 -14 STRAIGHT FLANGE KIT • 393691 NATURAL GAS TO LP CONVERSION KIT • REDUCER ADAPTERS FOR GAS CONTROL (WITH VR8304M) SCREWS IGNITER- SENSOR 'MIRE NUTS (3) ADAPTER `► M24883 Fig. 1. Y861OU retrofit kit components. 3 3116 (81) 2(51) 3 ( 3116 (5) x 2 -III- 51/2(140) M248M Fig. 2. S861OU module dimensions in inches (mm). 68- 0291 -01 4 PRESSURE REGULATOR ADJUSTMENT (UNDER CAP SCRE INLET PRESSURE TAF INLET 0 "'RING RMINALS (3) OUTLET PRESSURE TAP ' OUTLET PILOT OUTLET __ ADJUSTMENT CONTROL (UNDER CAP SCREW) KNOB M24885 PRESSURE REGULATOR ADJUSTMENT (UNDER CAP SCREW) \ INLET o PRESSURE TAP INLET 0 O � T 4 -1/16 (104) Y861 0U INTERMITTENT PILOT RETROFIT KIT 4 IN. (102) MAX SWING RADIUS Fig. 3. VR8304M mounting dimensions in inches (mm). �\ WIN (91) MAX SWING RADIUS —\ WIRING )TEI MINALS (3) OUTLET PRESSURE TAP OUTLET PILOT OUTLET GAS ADJUSTMENT CONTROL (UNDER CAP SCREW) KNOB M24887 4 -1/8 (108) Fig. 4. VR8204A mounting dimensions in inches (mm). 5 v 1!2 t (13) 1 (25) �-- 2 -11116 (69) 112 �, (13) 1 (25) --*-- 2 -11/16 (69) 315/16 199) 1 -7/76 (36) 1 MM86 3 -1l2 (89) 1 -7/16 (36) M24888 68- 0291 -01 LED Status and Troubleshooting The ignition control module has two LEDs; one for flame sensing and one for system status: T7_7_1 'tai.•.�crrV.fm♦ �. ne we � a w.6'np[.lMagsq p q h .NYe�W CM�11t OZ FLAME LED STATUS LED Fig. 21. Location of LEDs. Y8610U INTERMITTENT PILOT RETROFIT KIT • Flame LED (Yellow) — Indicates flame presence and strength. See Table 9. • Status LED (Green) — Indicates system operation status and error conditions. See Table 10 on page 20 and the `Troubleshooting Guide" on page 21. M23619 Tahla 9 YPIIAW 1 Gn CI— r..A-- Yellow LED Flash Code a Indicates Recommended Service Action Heartbeat Normal Flame Signal Not applicable 2 Weak Flame Signal— System will operate reliably but flame Perform routine maintenance to assure optimum signal is less than desired. flame signal. NOTE: This indication may flash temporarily during or shortly after lightoff on some applications. 1 Marginal Flame Signal— System may not operate reliably over Check gas supply, pilot burner, flame sense time. Service call recommended. wiring, contamination of flame rod, burner ground connection. NOTE: This indication may flash temporarily during or shortly after lightoff on some applications. OFF Flame Signal below minimum threshold for system operation Check gas supply, pilot burner, flame sense wiring, contamination of flame rod, burner ground connection. i 1Q0JI vuutl UCJUf IPLIUnS: - Heartbeat: constant 1/2 second bright, 1/2 second dim cycles. - The flash code number signifies that the LED flashes X ti mes at 2 Hz, remains off for two seconds, and then repeats the sequence. 19 68- 0291 -01 Y861 0U INTERMITTENT PILOT RETROFIT KIT Table 10. Green LED Status Codes. Flash Code (X + y) a Indicates Next System Action Recommended Service Action OFF No "Call for Heat' Not applicable None Flash Fast Startup - Flame sense Not applicable None calibration Heartbeat Normal operation Not applicable Nnna 2 5 minute Retry Delay Initiate new trial for ignition after retry delay If system fails to light on next trial for - Pilot flame not detected during trial for ignition completed. ignition check gas supply, pilot burner, spark and flame sense wiring, flame rod contaminated or out of position, burner ground connection. 3 Recycle - Flame failed during run Initiate new trial for ignition. Flash code will remain through the ignition trial until flame is If system fails to light on next trial for ignition, check gas supply, pilot burner, proved. flame sense wiring, contamination of flame rod, burner ground connection. 4 Flame sensed out of If situation self corrects within 10 seconds, Check for pilot flame. Replace gas valve if sequence control module returns to normal sequence. pilot flame present. If no pilot flame, cycle If flame out of sequence remains longer 'Call for Heat." If error repeats, replace than 10 seconds, control module goes to control. Flash code 6 +4 (see below). 5 Damper Error: - Damper required but If damper error corrects, ignition control resumes Check damper connectim, damper wiring, not present normal operation, and 24V connection on control. - Damper failed to open within 60 seconds Replace damper if necessary. - Damper failed to close within 60 seconds 7 Flame sense leakage to Control module remains in wait mode. Check flame sense lead wire for damage ground When the fault corrects, control module or shorting. Check that flame rod is in resumes normal operation after a one proper position. Check flame rod ceramic minute delay. for cracks, damage or tracking. 8 Low secondary voltage Control module remains in wait mode. Check transformer and AC line for proper supply When the fault corrects, control module input voltage to the control. Check with full resumes normal operation after a one system load on the transformer. minute delay. 6 +2 5 minute Retry Delay Initiate new trial for ignition after retry delay Check gas supply, pilot burner, spark and - On every third retry on the same "Call for Heat' completed. flame sense wiring, flame rod contaminated or out of position, burner ground connection. 6 +3 5 minute Retry Delay - On every 6th flame Initiate new trial for ignition after retry delay Check gas supply, pilot burner, flame failure during run on the "Call completed. sense wiring, contamination of flame rod, burner ground connection. same for Heat' 6+4 Flame sensed out of Control module waits until flame is no longer Check for pilot flame. Replace gas valve if sequence for longer than sensed and then goes to soft lockout. Flash pilot flame present. If no pilot flame, cycle 10 seconds code continues. Control module auto resets `Call for Heat." If error repeats, replace the from soft lockout after one hour. S861 OU control module. ON Soft lockout due to error Control module auto resets from soft lockout Reset by cycling "Call for Heat." If error check detected during self sequences after one hour. repeats, replace the S861 0U control module. ° Flash Code Descriptions: Flash Fast: rapid blinking. Heartbeat: constant 1/2 second bright, 1/2 second dim cycles. A single flash code number signifies that the LED flashes X times at 2 Hz, remains off for two seconds, and then repeats the sequence. X + Y flash codes signify that the LED flashes X times at 2 Hz, remains off for two seconds, flashes Y times at 2Hz, remains of for three seconds, and then repeats the sequence. 68- 0291 -01 20 NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL TIMES MWW00' Town of Vail, Community Development, 75 South Frontage Road, Vail, Colorado 81657 p. 970.479.2139, f. 970.479.2452, inpsections 970.479.2149 ADD /ALT MF BUILD PERMIT Permit #: B10 -0017 Project #: PRJ08 -0279 Job Address: 352 E MEADOW DR VAIL Status .. : ISSUED Location......: UNIT 303, VAIL MOUNTAIN LODGE Applied ..: 02/17/2010 Parcel No....: 210108255007 Issued...: 04/15/2010 Expires ...: 10/12/2010 OWNER ANGELO, JOHN M. & JUDITH H. 02/17/2010 IN CARE OF NAME ANN REILLY BISHOP ESQ PO BOX 820 VAIL CO 81658 APPLICANT GEORGE SHAEFFER CONSTRUCTION 02117/2010 Phone: 845 -5656 PO BOX 373 VAIL CO 81658 License: 302 -A CONTRACTOR GEORGE SHAEFFER CONSTRUCTION 02/17/2010 Phone: 845 -5656 PO BOX 373 VAIL CO 81658 License: 302 -A Description: ADDITION & REMODEL Occupancy: R2 Type Construction:IIA Valuation: $1,763,336.00 Total Sq Ft Added: 250 FEE SUMMARY Building Permit Fee ------ > $8,397.35 Will Cal Fee --------------------- > $4.00 Total Calculated Fees ------------- > $49,176.35 Plan Check------------ - - - - -> $5,458.28 Use Tax Fee --------------------- > $35,066.72 Additional Fees------------------ - - - - -> $9,966.25 Add'1 Plan Check Hours -> $0.00 Restuarant Plan Review - - - - -> $0.00 TOTAL PERMIT FEES--------- - - - - -> $59,142.60 Investigation------------ - - - - -> $0.00 Recreation Fee------------ - - - - -> $250.00 Payments ------------------------------- > $59,142.60 Total Calculated Fees--- - - - - -> $49,176.35 BALANCE DUE ------------------------ > $0.00 *********** xfixxxxfixxxxfi******* t* xxxx* xxxfififixfixfix** fi************ xxxxxfixxxxfixxx** xxx* fi******* tfixxxxxxxxxxxfifix* x* fi****** x* xx xxxxxxxfixfififi*** fi** x* x** x** xxxxxxxxxxxxxfifififi *x * * ** * * * * * * ** * : :x DECLARATIONS I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plot plan, and state that all the information as required is correct. I agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure according to the towns zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town applicable thereto. REQUESTS FOR INS 910 AM - 4:00 PM. Print bld_alt_construction_perm it_041908 BE MADE TWENTY -FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM Date APPROVALS Permit #: B10 -0017 as of 04 -15 -2010 Status: ISSUED Item: 05100 BUILDING DEPARTMENT 03/08/2010 cg Action: CR SEE LASERFISCHE FOR COMMENTS 04/01/2010 cg Action: CR second check comments sent. see laserfische 04/15/2010 cg Action: AP approved corrected plans Item: 05400 PLANNING DEPARTMENT 03/03/2010 bgibson Action: AP plans routed to D1 04/15/2010 bgibson Action: AP staging plan approved, see conditions Item: 05600 FIRE DEPARTMENT 03/01/2010 mvaughan Action: AP 1. Impairment plan must be approved prior to demo of existing sprinkler system in unit. 2. Staging plan for 75 ton crane must be approved prior to placement. 3. Separate fire alarm and sprinkler permits required for changes. 4. Asbestos plan recieved and approved. Item: 05500 PUBLIC WORKS 04/15/2010 Martin Action: AP Per Leaonard +++ x+ wwwwwwwwwwwwx++ x+ ww: wwwwww++++++++ wwwwwwwwx+ x++++ ww+ wwwwwwwwxxx++++ xwwwwwwxwwxwwwwww+ w+ r++ w+ wwwxxwwxx++ x+++ wxxwwwxwxwwwxxx++ w+ wwwwwwxwxw+ x++++++ wwwxw + + ++ +xxw + + + + + + +ww +wxw + ++ »w See the Conditions section of this Document for any that may apply. bld_a It—co nstruction_perm it_041908 CONDITIONS OF APPROVAL Permit #: B10 -0017 as of 04 -15 -2010 Status: ISSUED Cond: 12 (BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE. Cond` 14 (BLDG.): ALL PENETRATIONS IN WALLS, CEILINGS, AND FLOORS TO BE SEALED WITH AN APPROVED FIRE MATERIAL. Cond: 1 (FIRE): FIRE DEPARTMENT APPROVAL IS REQUIRED BEFORE ANY WORK CAN BE STARTED. Cond: CON0011298 Prior to the release of this building permit, the applicant shall provide a fee -in -lieu payment in accordance with Chapter 12 -24, Inclusionary Zoning, to mitigate the employee housing mitigation need generated by a 250 square foot addition of GRFA. Cond: CON0011381 DEFFERED SUBMITTAL ITEM: SKYLIGHT GLAZING Cond: CON0011382 SPECIAL INSPECTION REPORTS REQURIED PER IBC CH. 17 Cond: CON0011383 Prior to construction, the applicant shall submit a Developer Improvement Agreement ensuring the revegetation of the areas of disturbance shown on the staging plan. In addition to the tree protection measures shown on the staging plant, the applicant shall construct a bridge /walkway at the southwest corner of the building to protect the root zones of the existing trees from compaction due to construction activities. bld_a It_constructio n_pe rm it_041908 ************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** TOWN OF VAIL, COLORADO Statement ************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** Statement Number: R100000296 Amount: $54,354.23 04/15/201004:22 PM Payment Method: Check Init: SAB Notation: 100401 - GEORGE SHAEFFER ----------------------------------------------------------------------------- Permit No: B10 -0017 Type: ADD /ALT MF BUILD PERMIT Parcel No: 2101 - 082 - 5500 -7 Site Address: 352 E MEADOW DR VAIL Location: UNIT 303, VAIL MOUNTAIN LODGE Total Fees: $59,142.60 This Payment: $54,354.23 Total ALL Pmts: $59,142.60 Balance: $0.00 ************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** ACCOUNT ITEM LIST: Account Code -------------- - - - Description Current Pmts - -- ------------------------ - - - - -- ------ - - - - -- 11000003113300, CHPO HOUSING FEE IN LIEU 9,966.25 BP 00100003111100 BUILDING PERMIT FEES 8,397.35 PF 00100003112300 PLAN CHECK FEES 669.91 RF 11100003112700 RECREATION FEES 250.00 UT 11000003106000 USE TAX 4% 35,066.72 WC 00100003112800 WILL CALL INSPECTION FEE 4.00 ************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** TOWN OF VAIL, COLORADO Statement ************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** Statement Number: R100000124 Amount: $4,788.37 02/17/201003:24 PM Payment Method: Check Init: JLE Notation: 99988 GEORGE SHAEFFER ----------------------------------------------------------------------------- Permit No: B10 -0017 Type: ADD /ALT MF BUILD PERMIT Parcel No: 2101 - 082 - 5500 -7 Site Address: 352 E MEADOW DR VAIL Location: UNIT 303, VAIL MOUNTAIN LODGE Total Fees: $48,926.35 This Payment: $4,788.37 Total ALL Pmts: $4,788.37 Balance: $44,137.98 ************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** ACCOUNT ITEM LIST: Account Code Description Current Pmts -------------- - - - - -- ------------------------ - - - - -- ------ - - - - -- PF 00100003112300 PLAN CHECK FEES 4,788.37 Department of Community Development 5 South Frontage Road Vail, Colorado 81657 970-479-2138 FAX 970 - 479 -2452 www.vailgov.com PROJECT REVIEW COMMENTS DATE: TO: PERMIT APPLICATION #: PROJECT ADDRESS: OCCUPANCY GROUP: TYPE OF CONSTRUCTION NUMBER OF STORIES: BUILDING AREA: 3/9/10 George Schaeffer Construction Company steveh @gsconco.com B10-0017 352 East Meadow Drive 303 R -2 IIA existing 250 s.f. addition • Submit two complete sets of revised construction documents containing the requested information with all plan revision items clouded or otherwise identified. • Please respond in writing to each comment with a response letter addressing each comment. BUILDING DEPARTMENT COMMENTS Architectural Comments: 1 Revise plans to provide allowable area calculations for the building to show the existing and proposed building area per IBC chapter 5. 2 Revise plans to provide a means of egress plan for the exits serving this unit and the proposed expansion. IBC ch. 10 3 Clearly show location of the property lines on sheet A1.0 4 Provide fire resistive wall construction within 30' of the property lines per IBC table 602. Openings shall comply with IBC table 705.8 5 Sheet A6.3 is referenced on the drawings, but not included in the drawing set 6 Provide complete construction details for fire resistive assembly construction of the 1 hour floor /ceiling and 1 hour roof /ceiling assemblies. Include assembly listing and complete construction detail including drywall fastening. IBC table 601 7 Provide complete construction details for fire resistive assembly construction of the 1 hour walls Include assembly listing and complete construction detail including drywall fastening. IBC table 601 8 Provide complete construction details for fire resistive assembly construction of the 1 hour structural frame. Include assembly listing and complete construction detail including drywall fastening. IBC table 601 9 Revise all interior guardrails to minimum 42" height per IBC 1013 10 Provide complete construction plans and details for the glass solarium enclosure including structural drawings. The structural plans do not include construction details for the glass construction. 11 Revise window schedule to indicate window U -value per Comcheck and IECC requirements 12 Revise building sections and details to show R- values of all insulation per Comcheck and IECC requirements. 13 Revise plans to include construction details for providing 1 hour assembly at all recessed lights located in the 1 hour ceilings. IBC 713.4.1.2 14 Provide 20 minute doors at all doors into the exit corridor. IBC Table 715.4 15 Provide snow retention for al new roof areas per Town of Vail ordinance 18. Snow fenced must be designed by a Colorado State Licensed Engineer. 16 Specify class A roof covering material on the drawings per Town of Vail ordinance 18. Structural Comments: 17 Revise plan to show all required information on the drawings per IBC 1603.1. 18 Include complete construction plans for the sunroom. Plans must be stamped and signed by a Colorado State Licensed Engineer. 19 Please complete the attached Town of Vail Special Inspection Program form. 20 Revise stairway construction plans sheet S1.0 to reference the 2009 IBC as adopted by Town of Vail. 21 Revise design criteria for stairway construction plans to reference the required concentrated load per IBC table 1607.1 note f 22 Provide construction and connection details for guardrails showing compliance with IBC 1607.7.1 Mechanical Comments: 23 Revise plans to provide ceiling radiation fire dampers in all ductwork, bath fans etc. located in the 1 hour ceiling assembly. IMC 607.6.2 Electrical Comments: 24 Provide complete lighting and power plans for the unit showing compliance with all applicable sections of 2008 NEC and 2009 IECC. BUILDING PERMIT APPLICATION Separate permits are required for electrical, plumbing, mechanical, fireplace, etc. Project Street Address: 352 East Meadow Drive (Number) (Street) Building /Complex Name: Vail Mountain Lodge 303/ (Suite #) Contractor Information: Company: George Shaeffer Construction Company Company Address: PO Box 373 City: Vail State: Co Zip: 81658 Contact Name: Steve Hooker Contact Phone: 970- 790 -1522 E -Mail steveh @gsconco.com Town of Vail Contractor Registration No.: 302 -A X ContmotKr SIlgnature (r Wired) Property Information Parcel #: 210108255007 (For parcel #, contact Eagle County Assessors Office at 970 - 328 -8640 or visit www.eaglecounty.us /patie) Tenant Name: Judy Hart Angelo Owner Name: Judy Hart Angelo Valuations (Labor & Materials) Building: Plumbing: Electrical: Mechanical: (including fireplace) Total: 1,481,636 (t 100,340 $ 57,450 (t 123,910 x 1,763,336 Office Use: 7030? Project #: DRB #: Ir/ a-4�7 Building Permit #: E' 0 — 00 1-] to #: Block # Subdivision:U ((- Detailed Scope and Location of Work: Complete interior remodel of all finishes, convert existing deck space to living space, change pitch of roof, add dormer, replace windows & exterior doors. (use additional sheet if necessary) Work Class: New ( ) Addition ( ) Remodel Repair ( ) Other ( ) Work Type Interior ( ) Exterior ( ) Both (� } Type of Building: Single- Family Duplex ( ) Multi - Family ( ) Commercial ( ) Other( ) Does a Fire Alarm Exist? Yes ( v) No( ) Monitored Alarm? Yes (v) No( ) Does a Sprinkler System Exist? Yes ( v) No( ) # & Type of Existing Fireplaces: Gas Appliances 0 Gas Log Wood /Pellet Wood Burning 1 # & Type of Proposed Fireplaces: Gas Appliances 2 Gas Log 1 Wood /Pellet Wood Burning Date Received: D a� FEB 17 2010 TOWN OF VAIL -to r ' q H A ER'z + ENGINEERING • COMFORT SYSTEMSIrt PO BOX 8610 • AVON, CO 81620 • Telephone 970 - 845 -7910 Fax 970 -845 -7522 • E -mail drader @raderengineedng.com 2/17/10 Mark Ford Mosaic Architects 1829 Pearl Street Boulder, CO 80302 (303)247-1100 RE: Grand Annex at Vail Mountain Lodge COMcheck Energy Calculations REI Job #: 9071.00 Mark, 'fA 0 --aI 1 -1 FEB 17 2010 TOWN OF VAIL We have completed the COMcheck Energy Calculations for the Grand Annex at Vail Mountain Lodge in Vail. The residence was modeled as a multifamily addition and complies with the 2009 IECC based on the following assumptions: Building Assemblies • Metal Roof Structure — R -45 blown in batt insulation in cavity • Steel Frame Walls — R -22 blown in Batt insulation in cavity, R -5 continuous as part of the EFIS • All Floors Above Conditioned Space Fenestrations & Doors • Windows — U -0.34, SHGC -0.34 • Skylights — U -0.4, SHGC- 0.5 • Glass Doors — U -0.4, SHGC -0.5 Note that all insulation values are listed as nominal values. Please review the documents and call if you have any questions. Thank you, Evan Wheeler Town of Vail OFFICE COPY N( COMcheck Software Version 3.7.0 Envelope Compliance Certificate 2009 IECC Section 1: Project Information Project Type: Addition Project Title : Grand Annex at Vail Mountain Lodge Construction Site: Owner /Agent: Designer /Contractor: 352 East Meadow Dr. Mark Ford Evan Wheeler Unit 303 Mosaic Architects Rader Engineering Vail, CO 81657 1829 Pearl Street 40690 Hwy 6 Suite E -1 R -Value Boulder, CO 80302 Avon, CO 81620 Roof 1: Metal Building, Standing Seam 303 - 247 -1100 90.845.7910 0.0 mford @mosaicarchitects.com evanw @raderengineering.com Section 2: General Information Building Location (for weather data) Climate Zone: Vertical Glazing / Wall Area Pct.: Skylight Glazing / Roof Area Pct.: Activity Type(s) Multifamily Vail, Colorado 6b 39 %. 2% Floor Area 2128 Section 3: Requirements Checklist .. Climate- Specific Requirements: Component Name /Description Gross Area Cavity Cont. Proposed Budget or Perimeter R -Value R -Value U- Factor U- Factor(a) Roof 1: Metal Building, Standing Seam 1323 45.0 0.0 0.046 0.049 Skylight 1: Metal Frame with Thermal Break:Double Pane with 30 - -- - -- 0.400 0.600 Low -E, Clear, SHGC 0.50 Exterior Wall 1: Steel- Framed, 16" o.c. 1242 22.0 5.0 0.068 0.057 Window 1: Metal Frame with Thermal Break:Double Pane with 299 - -- - -- 0.340 0.550 Low -E, Clear, SHGC 0.34 Door 1: Glass (> 50% glazing):Nonmetal Frame, Non - Entrance 185 - - 0.400 0.350 Door, SHGC 0.50 (a) Budget U- factors are used for software baseline calculations ONLY, and are not code requirements Air Leakage, Component Certification, and Vapor Retarder Requirements: ❑ 1. All joints and penetrations are caulked, gasketed or covered with a moisture vapor - permeable wrapping material installed in accordance with the manufacturer's installation instructions. Li 2. Windows, doors, and skylights certified as meeting leakage requirements. I] 3. Component R- values & U- factors labeled as certified. ❑ 4. Insulation installed according to manufacturer's instructions, in substantial contact with the surface being insulated, and in a manner that achieves the rated R -value without compressing the insulation. ❑ 5. No roof insulation is installed on a suspended ceiling with removable ceiling panels. Lj 6. 'Other' components have supporting documentation for proposed U- Factors. I] 7. Stair, elevator shaft vents, and other outdoor air intake and exhaust openings in the building envelope are equipped with motorized dampers. Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J: \Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 1 of 8 8. Cargo doors and loading dock doors are weather sealed. 9. Recessed lighting fixtures installed in the building envelope are Type IC rated as meeting ASTM E283, are sealed with gasket or caulk. r.J 10.Bei4ding entrance doors have a vestibule equipped with closing devices. Exceptions: Building entrances with revolving doors. Doors that open directly from a space less than 3000 sq. ft. in area. 11. Vapor retarder installed. Section 4: Compliance Statement Compliance Statement: The proposed envelope design represented in this document is consistent with the building plans, specifications and other calculations submitted with this permit application. The proposed envelope system has been designed to meet the 2009 IECC requirements in COMcheck Version 3.7.0 and to comply with the mandatory requirements i the Requirements Checklist. IV4iJ Name - Title Signature Date Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J: \Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 2 of 8 2009 IECC COMcheck Software Version 3.7.0 Mechanical Compliance Certificate Section 1: Project Information Project Type: Addition Project Title : Grand Annex at Vail Mountain Lodge Construction Site: Owner /Agent: 352 East Meadow Dr. Mark Ford Unit 303 Mosaic Architects Vail, CO 81657 1829 Pearl Street Boulder, CO 80302 303 - 247 -1100 mford@mosaicarchitects.com Section 2: General Information Building Location (for weather data): Vail, Colorado Climate Zone: 6b Section 3: Mechanical Systems List Designer /Contractor: Evan Wheeler Rader Engineering 40690 Hwy 6 Suite E -1 Avon, CO 81620 90.845.7910 evanw @raderengineering.com uanti System Type & Description 1 HVAC System 1: Heating: Other, Electric, Capacity 67 kBtu /h / Cooling: Field- Assembled DX System, Capacity 49 kBtu /h, Air - Cooled Condenser / Multiple -Zone w/ Perimeter System 1 Water Heater 1: Electric Storage Water Heater, Capacity: 80 gallons w/ Circulation Pump, Efficiency: 0.91 EF Section 4: Requirements Checklist Requirements Specific To: HVAC System 1 : I] 1. Specified equipment consists of field- assembled components - efficiency documentation provided n 2. Minimum one temperature control device per zone - Exception: System is an independent perimeter system and must have at least one temperature control per building exposure over 50 ilneal ft and facing one orientation 3. Systems serving more than one zone must be VAV systems Ej 4. Controls capable of resetting supply air temp (SAT) by 25% of SAT -room temp difference ❑ 5. Automatic controls capable of resetting supply -air temperature (within a range of 25 percent of the difference between supply -air and design air temperature) in response to building loads or outdoor air temperature exist on systems serving multiple zones Exception: Systems that prevent reheating, retooling or mixing of heated and cooled supply air Exception: Seventy five percent of the energy for reheating is from site - recovered or site solar energy sources. Exception: Zones with peak supply air quantities of 300 cfm (142 Us) or less. Lj 6. Hot gas bypass limited to 50% of total cooling capacity Requirements Specific To: Water Heater 1 : I] 1. Hot water system sized per manufacturer's sizing guide ❑ 2. Electric Water Heater efficiency: 0.8 EF (333 SL, Btu /h (if > 12 kW)) Lj 3. All piping in circulating system insulated 0 4. Hot water storage temperature adjustable down to 120 degrees F or lower Lj 5. Automatic time control of heat tapes and recirculating systems present ❑ 6. Controls will shut off operation of circulating pump between water heater /boiler and storage tanks within 5 minutes after end of heating cycle Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J: \Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 3 of 8 Generic Requirements: Must be met by all systems to which the requirement is applicable: Lj 1. Plant equipment and system capacity no greater than needed to meet loads Exception: Standby equipment automatically off when primary system is operating Exception: Multiple units controlled to sequence operation as a function of load 2. Minimum one temperature control device per system ❑ 3. Minimum one humidity control device per installed humidification /dehumidification system 0 4. Load calculations per ASHRAE /ACCA Standard 183 L1 5. Automatic Controls: Setback to 55 degrees F (heat) and 85 degrees F (cool); 7 -day clock, 2 -hour occupant override, 10 -hour backup Exception: Continuously operating zones Exception: 2 kW demand or less, submit calculations 0 6. Outside -air source for ventilation; system capable of reducing OSA to required minimum Ej 7. R -5 supply and return air duct insulation in unconditioned spaces R -8 supply and return air duct insulation outside the building R -8 insulation between ducts and the building exterior when ducts are part of a building assembly Exception: Ducts located within equipment Exception: Ducts with interior and exterior temperature difference not exceeding 15 degrees F. Exception: Continuously welded and locking -type longitudinal joints and seams on ducts operating at static pressures less than 2 inches w.g. pressure classification ❑ 8. Mechanical fasteners and sealants used to connect ducts and air distribution equipment Li 9. Ducts sealed - longitudinal seams on rigid ducts; transverse seams on all ducts; UL 181 A or 181 B tapes and mastics Lj 10.Hot water pipe insulation: 1.5 in. for pipes -1.5 in. and 2 in. for pipes >1.5 in. Chilled water /refrigerant/brine pipe insulation: 1.5 in. for pipes 11.5 in. and 1.5 in. for pipes >1.5 in. Steam pipe insulation: 1.5 in. for pipes 11.5 in. and 3 in. for pipes >1.5 in. - Exception: Piping within HVAC equipment. - Exception: Fluid temperatures between 55 and 105 degrees F. - Exception: Fluid not heated or cooled with renewable energy. - Exception: Piping within room fan -coil (with AHR1440 rating) and unit ventilators (with AHRI840 rating). - Exception: Runouts <4 ft in length. 11. Operation and maintenance manual provided to building owner 12. Piping, insulated to 1/2 in. if nominal diameter of pipe is <1.5 in.; Larger pipe insulated to 1 in. thickness 13. Lavatory faucet outlet temperatures in public restrooms limited to 110 degrees F (43 degrees C) 14.Thermostatic controls have 5 degrees F deadband Exception: Thermostats requiring manual changeover between heating and cooling Exception: Special occupancy or special applications where wide temperature ranges are not acceptable and are approved by the authority having jurisdiction. F1 15. Balancing devices provided in accordance with IMC (2006) 603.17 ❑ 16. Demand control ventilation (DCV) present for high design occupancy areas ( >40 person /1000 ft2 in spaces >500 ft2) and served by systems with any one of 1) an air -side economizer, 2) automatic modulating control of the outdoor air damper, or 3) a design outdoor airflow greater than 3000 cfm. Exception: Systems with heat recovery. Exception: Multiple -zone systems without DDC of individual zones communicating with a central control panel. Exception: Systems with a design outdoor airflow less than 1200 cfm. Exception: Spaces where the supply airflow rate minus any makeup or outgoing transfer air requirement is less than 1200 cfm. Ll 17. Motorized, automatic shutoff dampers required on exhaust and outdoor air supply openings Exception: Gravity dampers acceptable in buildings <3 stories Exception: Gravity dampers acceptable in systems with outside or exhaust air flow rates less than 300 cfm where dampers are interlocked with fan Li 18. Stair and elevator shaft vents are equipped with motorized dampers LI 19.Automatic controls for freeze protection systems present ❑ 20. Exhaust air heat recovery included for systems 5,000 cfm or greater with more than 70% outside air fraction or specifically exempted Section 5: Compliance Statement Compliance Statement: The proposed mechanical design represented in this document is consistent with the building plans, specifications and other calculations submitted with this permit application. The proposed mechanical systems have been designed to meet the 2009 IECC requirements in COMcheck Version 3.7.0 and to comply with the mandatory requirements in the Requirements Checklist. Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J: \Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 4 of 8 AAtd 6t,6 4"(1t Name - Title 6M-y w5r� Signature 2117t to Date Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J:\Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 5 of 8 N( COMcheck Software Version 3.7.0 Mechanical Requirements Description 2009 IECC The following list provides more detailed descriptions of the requirements in Section 4 of the Mechanical Compliance Certificate. Requirements Specific To: HVAC System 1 : 1. The specified cooling system consists of field- assembled components. Documentation must be submitted showing the system meets ASHRAE 90.1 Code equipment efficiency requirements for a comparable package equipment type and capacity range. 2. Each zone of a multiple -zone system must have its own temperature control device. - Exception: Individual zone controls are not required for the specified system because it serves a perimeter area and is designed to offset heating or cooling loads through the building envelope. To qualify for this exception, the area served by the system must have one temperature control device for each building exposure with exterior walls facing a single orientation for 50 contiguous feet or more, and each temperature control must be located within the spaces served by the system. 3. Systems serving multiple thermostatic control zones must be variable -flow systems. Zone terminal controls must reduce the flow of primary supply air before reheating, recooling, or mixing air streams. 4. Multiple -zone systems must include controls capable of resetting the supply air temperature by at least 25% of the difference between the design supply air temperature and the design room temperature. 5. Automatic controls capable of resetting supply -air temperature (within a range of 25 percent of the difference between supply -air and design air temperature) in response to building loads or outdoor air temperature exist on systems serving multiple zones. Exception: Systems that prevent reheating, recooling or mixing of heated and cooled supply air Exception: Seventy five percent of the energy for reheating is from site - recovered or site solar energy sources. Exception: Zones with peak supply air quantities of 300 cfm (142 Us) or less. 6. For cooling systems — 240 kBtu /h, maximum hot gas bypass capacity must be no more than 50% total cooling capacity. Requirements Specific To: Water Heater 1 : 1. Service water heating system design loads for the purpose of sizing systems and equipment must be determined in accordance with manufacturers' published sizing guidelines. 2. Service water heating equipment used solely for heating potable water, pool heaters, and hot water storage tanks must meet the following miniumum efficiency: Electric Water Heater efficiency: 0.8 EF (333 SL, Btu /h (if > 12 kW)) 3. Insulation must be provided for recirculating system piping, including the supply and return piping of a circulating tank type water heater. 4. Temperature controls must be provided that allow for storage temperature adjustment from 120 degrees F or lower to a maximum temperature compatible with the intended use except when the manufacturer's installation instructions specify a higher minimum thermostat setting to minimize condensation and resulting corrosion. Documentation of the installation instructions must be provided to be exempted from this requirement. 5. Systems designed to maintain usage temperatures in hot water pipes, such as recirculating hot water systems or heat trace, must be equipped with automatic time switches or other controls that can be set to switch off the temperature maintenance system during extended periods when hot water is not required. 6. When used to maintain storage tank water temperature, recirculating pumps must be equipped with controls limiting operation to the start of the heating cycle to a maximum of 5 minutes after the end of the heating cycle. Generic Requirements: Must be met by all systems to which the requirement is applicable: 1. All equipment and systems must be sized to be no greater than needed to meet calculated loads. A single piece of equipment providing both heating and cooling must satisfy this provision for one function with the capacity for the other function as small as possible, within available equipment options. Exception: The equipment and /or system capacity may be greater than calculated loads for standby purposes. Standby equipment must be automatically controlled to be off when the primary equipment and /or system is operating. Exception: Multiple units of the same equipment type whose combined capacities exceed the calculated load are allowed if they are provided with controls to sequence operation of the units as the load increases or decreases. 2. Each heating or cooling system serving a single zone must have its own temperature control device. 3. Each humidification system must have its own humidity control device. 4. Design heating and cooling loads for the building must be determined using procedures in the ASHRAE Handbook of Fundamentals or an approved equivalent calculation procedure. 5. The system or zone control must be a programmable thermostat or other automatic control meeting the following criteria: a) capable of setting back temperature to 55 degrees F during heating and setting up to 85 degrees F during cooling, b) capable of automatically setting back or shutting down systems during unoccupied hours using 7 different day schedules, c) have an accessible 2 -hour occupant override, d) have a battery back -up capable of maintaining programmed settings for at least 10 hours without power. Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J: \Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 6 of 8 Exception: A setback or shutoff control is not required on thermostats that control systems serving areas that operate continuously. Exception: A setback or shutoff control is not required on systems with total energy demand of 2 kW (6,826 Btu /h) or less. 6. The system must supply outside ventilation air as required by Chapter 4 of the International Mechanical Code. If the ventilation system is designed to supply outdoor -air quantities exceeding minimum required levels, the system must be capable of reducing outdoor -air flow to the minimum required levels. 7. Air ducts must be insulated to the following levels: a) Supply and return air ducts for conditioned air located in unconditioned spaces (spaces neither heated nor cooled) must be insulated with a minimum of R -5. Unconditioned spaces include attics, crawl spaces, unheated basements, and unheated garages. b) Supply and return air ducts and plenums must be insulated to a minimum of R -8 when located outside the building. c) When ducts are located within exterior components (e.g., floors or roofs), minimum R -8 insulation is required only between the duct and the building exterior. - Exception: Duct insulation is not required on ducts located within equipment. - Exception: Duct insulation is not required when the design temperature difference between the interior and exterior of the duct or plenum does not exceed 15 degrees F. - Exception: Continuously welded and locking -type longitudinal joints and seams on ducts operating at static pressures less than 2 inches w.g. pressure classification. 8. Mechanical fasteners and seals, mastics, or gaskets must be used when connecting ducts to fans and other air distribution equipment, including multiple -zone terminal units. 9. All joints, longitudinal and transverse seams, and connections in ductwork must be securely sealed using weldments; mechanical fasteners with seals, gaskets, or mastics; mesh and mastic sealing systems; or tapes. Tapes and mastics must be listed and labeled in accordance with UL 181A and shall be marked '181A -P' for pressure sensitive tape, '181A -M' for mastic or'181A -H' for heat - sensitive tape. Tapes and mastics used to seal flexible air ducts and flexible air connectors shall comply with UL 181 B and shall be marked '181 B -FX' for pressure- sensitive tape or'181 B -M' for mastic. Unlisted duct tape is not permitted as a sealant on any metal ducts. 10. All pipes serving space- conditioning systems must be insulated as follows: Hot water piping for heating systems: 1 1/2 in. for pipes <=1 1 /2 -in. nominal diameter, 2 in. for pipes >1 1 /2 -in. nominal diameter. Chilled water, refrigerant, and brine piping systems: 1 1/2 in. insulation for pipes < =1 1 /2 -in. nominal diameter, 1 1/2 in. insulation for pipes >1 1 /2 -in. nominal diameter. Steam piping: 1 1/2 in. insulation for pipes <=1 1 /2 -in. nominal diameter, 3 in. insulation for pipes >1 1 /2 -in. nominal diameter. Exception: Pipe insulation is not required for factory- installed piping within HVAC equipment. Exception: Pipe insulation is not required for piping that conveys fluids having a design operating temperature range between 55 degrees F and 105 degrees F. Exception: Pipe insulation is not required for piping that conveys fluids that have not been heated or cooled through the use of fossi fuels or electric power. Exception: Piping within room fan -coil (with AHR1440 rating) and unit ventilators (with AHRI840 rating). Exception: Pipe insulation is not required for runout piping not exceeding 4 ft in length and 1 in. in diameter between the control valve and HVAC coil. 11. Operation and maintenance documentation must be provided to the owner that includes at least the following information: a) equipment capacity (input and output) and required maintenance actions b) equipment operation and maintenance manuals c) HVAC system control maintenance and calibration information, including wiring diagrams, schematics, and control sequence descriptions; desired or field- determined set points must be permanently recorded on control drawings, at control devices, or, for digital control systems, in programming comments d) complete narrative of how each system is intended to operate. 12. Service hot water piping, where required, must be insulated to 1/2 in. if pipe less than 1.5 in. nominal diameter. Larger pipe must be insulated to 1 in.. Pipe insulation will have a conductivity of less than 0.28 Btu. in /(h -ft2- degrees F). 13. Temperature controlling means must be provided to limit the maximum temperature of water delivered from lavatory faucets in public facility restrooms to 110 degrees F. 14. Thermostats controlling both heating and cooling must be capable of maintaining a 5 degrees F deadband (a range of temperature where no heating or cooling is provided). Exception: Deadband capability is not required if the thermostat does not have automatic changeover capability between heating and cooling. Exception: Special occupancy or special applications where wide temperature ranges are not acceptable and are approved by the authority having jurisdiction. 15. Balancing devices provided in accordance with IMC (2006) 603.17. 16. Demand control ventilation (DCV) required for high design occupancy areas ( >40 person /1000 ft2 in spaces >500 ft2) and served by systems with any one of 1) an air -side economizer, 2) automatic modulating control of the outdoor air damper, or 3) a design outdoor airflow greater than 3000 cfm. Exception: Systems with heat recovery. Exception: Multiple -zone systems without DDC of individual zones communicating with a central control panel. Exception: Systems with a design outdoor airflow less than 1200 cfm. - Exception: Spaces where the supply airflow rate minus any makeup or outgoing transfer air requirement is less than 1200 cfm. 17. Outdoor air supply and exhaust systems must have motorized dampers that automatically shut when the systems or spaces served are not in use. Dampers must be capable of automatically shutting off during preoccupancy building warm -up, cool -down, and setback, Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J: \Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 7 of 8 except when ventilation reduces energy costs (e.g., night purge) or when ventilation must be supplied to meet code requirements. Both outdoor air supply and exhaust air dampers must have a maximum leakage rate of 3 cfm /ft2 at 1.0 in w.g. when tested in accordance with AMCA Standard 500. Exception: Gravity (non- motorized) dampers are acceptable in buildings less than three stories in height. Exception: Systems with a design outside air intake or exhaust capacity of 300 cfm (140 Us) or less that are equipped with motor operated dampers that open and close when the unit is energized and de- energized, respectively. 18. Stair and elevator shaft vents must be equipped with motorized dampers capable of being automatically closed during normal building operation and interlocked to open as required by fire and smoke detection systems. All gravity outdoor air supply and exhaust hoods, vents, and ventilators must be equipped with motorized dampers that will automatically shut when the spaces served are not in use. - Exception: Gravity (non- motorized) dampers are acceptable in buildings less than three stories in height above grade. - Exception: Ventilation systems serving unconditioned spaces. 19. All freeze protection systems, including self - regulating heat tracing, must include automatic controls capable of shutting off the systems when outside air temperatures are above 40 degrees F or when the conditions of the protected fluid will prevent freezing. Snow- and ice - melting systems must include automatic controls capable of shutting off the systems when the pavement temperature is above 50 degrees F and no precipitation is falling, and an automatic or manual control that will allow shutoff when the outdoor temperature is above 40 degrees F. 20. Individual fan systems with a design supply air capacity of 5000 cfm or greater and minimum outside air supply of 70 percent or greater of the supply air capacity must have an energy recovery system with at least a 50 percent effectiveness. Where cooling with outdoor air is required there is a means to bypass or control the energy recovery system to permit cooling with outdoor air. Exception: Hazardous exhaust systems, commercial kitchen and clothes dryer exhaust systems that the International Mechanical Code prohibits the use of energy recovery systems. Exception: Systems serving spaces that are heated and not cooled to less than 60 degrees F. Exception: Where more than 60 percent of the outdoor heating energy is provided from site - recovered or site solar energy. Exception: Heating systems in climates with less than 3600 HDD. Exception: Cooling systems in climates with a 1 percent cooling design wet -bulb temperature less than 64 degrees F. Exception: Systems requiring dehumidification that employ energy recovery in series with the cooling coil. - Exception: Laboratory fume hood exhaust systems that have either a variable air volume system capable of reducing exhaust and makeup air volume to 50 percent or less of design values or, a separate make up air supply meeting the following makeup air requirements: a) at least 75 percent of exhaust flow rate, b) heated to no more than 2 degrees F below room setpoint temperature, c) cooled to no lower than 3 degrees F above room setpoint temperature, d) no humidification added, e) no simultaneous heating and cooling. Project Title: Grand Annex at Vail Mountain Lodge Report date: 02/17/10 Data filename: J: \Jobs \2009 - Jobs \9071.00 - Angelo Grand Annex \Mechanical \Calculations \9071- COMcheck- 021710.cck Page 8 of 8 T3�0'6cll—1 C ( D W IE Town of Veil FEB 17 2010 OFFICE- COPY TOWN OF VAIL Vail Fire Department— Asbestos Testing & Abatement Requirements Asbestos testing and abatement protects workers, homeowners, neighbors and emergency services responders from ex- posure to harmful asbestos. The Town of Vail asbestos abatement program is in addition to the State of Colorado's regu- lations. It is your responsibility to be in compliance with the State. Please contact the State directly for their requirements at the contact info listed below. When is asbestos testing required? ANY building projects disturbing more than these threshold levels of building materials require asbestos testing: One- and Two - Family Dwellings: 32 square feet All Others (commercial spaces, hotel rooms, etc): 160 square feet Definition of a single - family dwelling: any dwelling unit that is used primarily for a single family, including multi - family /condominium units, and fractional fee units. Asbestos testing results must be provided with your application for a building permit. Tests which identify POSITIVE results at more than 1% require abatement by a State - certified and Vail- registered abate- ment contractor. An asbestos abatement permit must be approved, and the clearance letter must be submitted to the Town of Vail before the building permit will be issued. Project Checklist My project falls into the category checked below: ❑ Will not disturb more than the threshold limits identified above. xTested negative, or at 1% or below (2 copies of test results included) ❑ Tested positive at more than 1 %, requires abatement (2 copies of test results included) Tips & Facts: • Even recent construction projects may include asbestos - containing materials, so buildings of any age require testing. • The "1989 Ban" on asbestos - containing materials is commonly misunderstood. "In fact, in 1991 the U.S. Fifth Circuit Court of Appeals vacated much of the so- called "Asbestos Ban and Phaseout" rule and remanded it to the EPA. Thus, much of the original 1989 EPA ban on the U.S. manufacturing, importation, processing, or distribution in commerce of many asbestos - containing product categories was set aside and did not take effect." - CDPHE Asbestos test results and abatement permit applications should be submitted to: Town of Vail, Community Development, 75 S Frontage Rd, Vail, CO, 81657. Town of Vail Contact: Fire Prevention Bureau Vail Fire Department 75 S Frontage Rd Fire_ inspectors @vailgov.com 970 - 479 -2252 www.vailcov.com State of Colorado Contact: Colorado Department of Public Health and Environment Asbestos Compliance Assistance Group 303 - 692 -3158 asbestos@state.co.us www.cdr)he.state.co.us 01 -Jan-10 1;10--0011 A & D Asbestos Testing and Cons John R. Peterman P.O. Box 1230 Clifton, CO. 81520 -1230 Cell 970 - 270 -3689 Home Phone 970 - 464 -5265 F9 Town of Vell INSPECTION REPORT PREPARED FOR: OFFICE COPY George Shaeffer Construction Company P.O. Box 373 Vail, CO. 81658 LOCATION: Vail Mountain Lodge 352 E. Meadow Drive Grand Annex Vail, CO. John R. Peterman Inspector Manager COLORADO Certificate No. 6601 COLORADO Registration #ACF -16522 UTAH Certificate No. 1236 UTAH Registration #ASBC -437 2 A & D Asbestos Testing and Consulting John R. Peterman Asbestos Testing, Project Design, and Consulting INTRODUCTION: On February 1 st, 2010 an inspection/survey was conducted and 5 bulk samples were collected from: Vail Mountain Lodge 352 E. Meadow Drive Grand Annex Vail, CO. The purpose of the inspection/survey was to locate and sample suspected Asbestos containing materials that might be present in the area of the Residence that is planned for renovation. The inspection was made, and the samples were collected by John R. Peterman, an A.H.E.R.A. and State of Colorado and Utah Certified Asbestos Inspector. Great care was taken during the inspection and sampling to be as accurate as possible. It should be noted that minimal damage was done to the existing building structures during the inspection so there is no documentation for unseen conditions or stored items. All samples were analyzed by DCM Science Lab in Wheatridge, CO. This laboratory is deemed "Proficient" in the E. P.A. Quality Assurance (QA) program for the determination of asbestos in bulk materials, and is accredited by the American Hygiene Association (AHA). SAMPLING PROTOCOL: A random sampling scheme was used to sample the suspect materials that were discovered. If during any future demolition or renovation work, suspect material is discovered that hasn't been sampled and would be disturbed, work should be halted until the material has been tested. A & D Asbestos Testing and Consulting John R. Peterman AsbestosTesting, Project Design, and Consulting Vail Mountain Lodge 352 E. Meadow Drive Grand Annex Vail, CO. RENOVATION AREA DESCRIPTION: The Grand Annex of the Vail Mountain Lodge is planned for interior renovation. The interior walls are sheetrock with a troweled texture. The ceilings are covered in sheetrock like the walls, and the floors are covered in carpet, and ceramic tiles. CONCLUSIONS & RECOMMENDATIONS: Laboratory analysis of the bulk samples indicate that no Asbestos was detected in any of the samples. 4 Date: February 1st, 2010 Location: The Residence, Vail Mountain Lodge, 352 E. Meadow Drive, The Grand Annex, Vail, CO. SAMPLE LOCATIONS SAMPLE NUMBER AREA SAMPLE REMOVED FROM DESCRIPTION VMLGA -B 001 VMLGA -B 002 VMLGA -B 003 VMLGA -B 004 VMLGA -B 005 E. Entry Closet Wall W. Entry Closet Wall Upstairs Bedroom Closet Wall Upstairs Bedroom Closet Wall Downstairs Bedroom Wall Composite Sheetrock w/Texture Composite Sheetrock w/Texture Composite Sheetrock w/Texture Composite Sheetrock w/Texture Composite Sheetrock w/Texture FRIABLE NO NO NO NO NO Date: February 1st, 2010 Location: The Residence, Vail Mountain Lodge, 352 E. Meadow Drive, The Grand Annex, Vail, CO. SAMPLE RESULTS: SAMPLE NUMBER DESCRIPTION ASBESTOS TYPE % VMLGA -B 001 Composite Sheetrock w/Texture NAD 0.00 VMLGA -B 002 Composite Sheetrock w/Texture NAD 0.00 VMLGA -B 003 Composite Sheetrock w/Texture NAD 0.00 VMLGA -B 004 Composite Sheetrock w/Texture NAD 0.00 VMLGA -B 005 Composite Sheetrock w/Texture NAD 0.00 KEY: NAD - No Asbestos Detected Date: February 1st, 2010 Location: The Residence, Vail Mountain Lodge, 352 E. Meadow Drive, The Grand Annex, Vail, CO. SUSPECT MATERIAL CONDITIONS SAMPLE NUMBER TYPE OF SUSPECT MATERIAL OVERALL CONDITION DAMAGED % TYPE OF DAMAGE VMLGA -B 001 SUR GOOD NO 0.00 N/A VMLGA -B 002 SUR GOOD NO 0.00 N/A VMLGA -B 003 SUR GOOD NO 0.00 N/A VMLGA -B 004 SUR GOOD NO 0.00 N/A VMLGA -B 005 SUR GOOD NO 0.00 N/A KEY: SUR - Surfacing Date: February 1st, 2010 Location: The Residence, Vail Mountain Lodge, 352 E. Meadow Drive, The Grand Annex, Vail, CO POTENTIAL FOR DISTURBANCE Sample Number Accessibility Potential Influence Potential Located in Plenum yes /no contact vibration air erosion yes /no VMLGA -B 001 YES HIGH LOW LOW NO VMLGA -B 002 YES HIGH LOW LOW NO VMLGA -B 003 YES HIGH LOW LOW NO VMLGA -B 004 YES HIGH LOW LOW NO VMLGA -B 005 YES HIGH LOW LOW NO CLIENT: A &D ASBESTOS TESTING AND CONSULTING P.O. BOX 1230 CLIFTON, CO 81520 -1230 DCMSL CLIENT SAMPLE SAMPLE NUMBER NUMBER SAMPLE DATE DESCRIPTION -1 VMLGA -B -001 2 -1 -10 A. TAN PAINT 12421 W. 49TH AVENUE, UNIT #6 B. WHITE DRYWALL MUD C. TAN FIBROUS WHEAT RIDGE, CO 80033 (303) 463 -8270 D. WHITE DRYWALL -2 VMLGA -B -002 2 -1 -10 A. MULTICOLORED PAINT B. WHITE DRYWALL MUD C. TAN FIBROUS D. WHITE DRYWALL -3 VMLGA -B -003 2 -1 -10 A. TAN PAINT 2 -3 -10 B. TAN FIBROUS C. WHITE DRYWALL MUD 2 -5 -10 D. WHITE DRYWALL -4 VMLGA -B -004 2 -1 -10 A. TAN PAINT 2 -2 -10 B. TAN FIBROUS C. WHITE DRYWALL MUD VAIL MTN. LODGE RESIDENCE D. WHITE DRYWALL -5 VMLGA -B -005 2 -1 -10 A. TAN AND RED PAINT - VAIL, CO B. TAN FIBROUS ADAT553 C. WHITE DRYWALL MUD PERCENTAGE COMPOSITION BY VISUAL ESTIMATE D. WHITE DRYWALL FOR CALCULATION PURPOSES, TRACE (TR) IS ASSUMED TO BE 0.5 %. (I) - INSEPARABLE LAYERS ND - NONE DETECTED DCM SCIENCE LABORATORY, INC. 12421 W. 49TH AVENUE, UNIT #6 WHEAT RIDGE, CO 80033 (303) 463 -8270 ' BULK ASBESTOS TEST REPORT PAGE 1 OF 2 ANALYSIS DATE: 2 -3 -10 REPORTING DATE: 2 -5 -10 RECEIPT DATE: 2 -2 -10 CLIENT JOB NO.: VAIL MTN. LODGE RESIDENCE PROJECT TITLE: 352 E. MEADOW DRIVE, GRAND ANNEX - VAIL, CO DCMSL PROJECT: ADAT553 PERCENTAGE COMPOSITION BY VISUAL ESTIMATE TOTAL TOTAL PERCENTAGE PERCENT ASBESTOS ASBESTOS OTHER FIBROUS NON - FIBROUS IDENTIFIED OF SAMPLE TYPE RANGE % IN SAMPLE CONSTITUENTS CONSTITUENTS MATERIALS 1.0% ND 0.0 100.0 100.0 3.0% ND 0.0 100.0 100.0 4.0% ND 100.0 0.0 100.0 92.0% ND 2.0 98.0 100.0 ND 2.0% ND 0.0 100.0 100.0 4.0% ND 0.0 100.0 100.0 5.0% ND 100.0 0.0 100.0 89.0% ND 2.0 98.0 100.0 ND 3.0% ND 0.0 100.0 100.0 5.0% ND 100.0 0.0 100.0 10.0% ND 0.0 100.0 100.0 82.0% ND 2.0 98.0 100.0 ND 2.0% ND 0.0 100.0 100.0 6.0% ND 100.0 0.0 100.0 7.0% ND 0.0 100.0 100.0 85.0% ND 2.0 98.0 100.0 ND 2.0% ND 0.0 100.0 100.0 5.0% ND 100.0 0.0 100.0 10.0% ND 0.0 100.0 100.0 83.0% ND 2.0 98.0 100.0 ND DCM Science Laboratory, Inc. 12421 W. 49th Avenue, Unit #6 Wheat Ridge, CO 80033 DCM Project No.: ADAT 553 Client Job No.: 352 E. MEADOW DR. Bulk Sample Analysis BULK SAMPLE ANALYSIS PROCEDURES: Page A of ;91 DCM Science Laboratory, Inc. analyzes bulk asbestos samples following procedures developed by the McCrone Research Institute and in compliance with guidelines established by the Environmental Protection Agency (EPA - 600 /R- 93/116, July, 1993). Bulk samples are prepared for analysis using a 1 OX -80X stereo microscope in a hepa filter hood which provides a contamination -free environment. The sample is then analyzed by polarized light microscopy (PLM) at 100X. When the sample consists of more than one layer, each layer is prepared and analyzed separately. Fiber and matrix materials are identified by the characterization of optical properties including color and pleochroism, form, cleavage, relief, birefringence, extinction, orientation, twinning, interference figure and other distinguishing features. Dispersion staining is also used to further aid in mineral identification. All percentages of asbestos, other fibers and non - fibrous constituents are calculated from the values obtained from analyses using the stereo and PLM microscopes. In -house and NIST standards as well as a chart prepared by R.D. Terry and G.V. Chilinger for "The Journal of Sedimentary Petrology ", (Volume 24, pp. 229 -234, 1955) provide a guide for estimating percentages. All samples are archived for six months unless other arrangements are made by the client. ACCREDITATION: DCMSL is accredited by NVLAP (since April 1, 1989). Our NVLAP Lab Code is 101258 -0. DCMSL complies with NVLAP requirements unless otherwise noted. ENDORSEMENT: The results of this analysis must not be used by the client to claim endorsement by NVLAP or any agency of the U.S. Government. This test report relates only to the items tested. This report may not be reproduced except in full, without the written approval of the laboratory. The analysis was performed by: John Silverman, Analyst Ron Schott Laboratory Director NVLAP Lab Code 101258 -0 Ron Schott, Analyst Date A.I.A. Ind uStrieS has served the architectural and construction market since 1977. Our team of experienced designers, craftsmen, and installers are committed to the highest standards of design, manufacturing, and installation. We offer the architect, contractor, and owner a Single— Source Responsibility for all of your skylighting requirements. Quality is designed and built into all of our products from the start so there are no problems with performance or aesthetics in the future. A.I.A. Industries never compromises quality for cost. Proven, well- engineered aluminum systems are used in all of our projects to ensure long lasting trouble free skylighting. A.IA. Industries offers a wide variety of glazing materials to meet energy requirements and give optimum comfort and light control to any type of building. A.I.A. Industries' manufacturing facility can handle custom designs and sizes as easily as standards so the designer is not limited, but can utilize skylights that are built to meet the building design and requirements. Let A.I.A. Industries offer you our insights on quality skylighting for your projects. We provide value engineering to enhance the architectural design, build in the quality, and give — Warranty — With quality designed, engineered, and built in from the beginning of each project, our warranty guarantees against leakage and defects in design, material, and work- manship. The glazing material carries the manufacturer's warranty. As customary, glass is not warranted against breakage after installation. Our performance warranty combined with our superior service is your guarantee of outstanding quality and lon- gevity for your skylighting now and in the future. Contact A.IA. Industries, Inc., for complete warranty details. page 2 • A.I.A. Industries • 303.296.9696 — Quality from Start to - ' s... n,a ®gyp du!* i�Q44 ► ;rrww -. . y v Quality Design — Starts with the beginning of each project Quality Fabrication — Built into each project as it is being manufactured Quality Installation — Professional installation finalizes the process of creating fine Above: Unequal sided pyramid, 2001 Non - Structural Applied System over wood beams Right: Structural ridge skylight illuminating spiral staircase Below: Structural double pitch entrance canopy Quality Skylighting Whether your next project is residential or commercial A.I.A. INDUSTRIES offers architects and contractors the freedom and support to achieve quality skylight designs that will enlighten any project with form, light, and performance The quality, innovative source for all of your skylighting requirements www.aiaindustries.com • A.I.A. Industries • page 3 R�f�� r�. 1 A.I.A. Industries, 2010 Structural System Please Note — Drawings Not to Scale Eave E100 Sill S104 page 4-A.I.A. Industries • 303.296.9696 Sill S1n1 ,., C1'W Sill 5100 Purlin P100 HIP /Rid g e HR100 Sill 5102 I A.I.A. Industries, Inc. APPLIED INDUSTRIAL & ARCHITECTURAL PRODUCTS 0 www.aiaindustries.com - A.I.A. Industries -page 5 lbz� A.I.A. Industries, 2001 Non - Structural Systerr Please Note — Drawings Not to Scale page 6 • A.I.A. Industries • 303.296.9696 Eave E500 Sill S502 Sill S500 Sill 5501 Pu rl i n P500 Mullion M500 Ridge H R501 Ridge H R500 Mullion @End A.I.A. Industries, Inc. APPLIED INDUSTRIAL & ARCHITECTURAL PRODUCTS �....,., www.aiaindustries.com - A.I.A. Industries - page 7 AM W ����rr skylig 0 0 0 7 Ft. square pyramid, 60° slope page 8 • A.I.A. Industries • 303.296.9696 Afk 12 Ft. square pyramid, 26 Ft. x 18 Ft. triangle, and 26 Ft. x 18 Ft. chevron shaped structural skylights Single glazed bronze tinted structural entrance canopy ... A.I.A. Industries prc hting Gazebo structure 16 Ft. diameter, 00611MON11r, 1 ' copper clad aluminum with beveled curved edge overlapping glass - „ Single slope skylight 14 Ft. x 230 Ft. long (55 Parallelograms tinted insulated glass 50" x 158 ") (,-17 _ mapJ r I w to Half round acrylic vaulted skylight ►vides you with unsurpassed www.aiaindustries.com - A.I.A. Industries - page 9 Part 1 - General 1.01 Scope A. Design, and fabrication of entire skylight system to include all extruded aluminum framing, anchors, and flashing metals. B. Glazing and glazing materials including gaskets, sealants, setting blocks, backer rods, and related materials. C. Finish on metal components. D. Installation of the metal framed skylight system. 1.02 Related Work A. Section 05120: Structural Steel. B. Section 05500: Metal Fabrications. C. Section 07620: Sheet Metal Flashing and Trim. D. Section 08800: Glazing. E. Section 1.03 References A. American Architectural Manufacturers Association (AAMA). B. American Society for Testing and Materials (ASTM) C. Flat Glass Manufacturers Association (FGMA). 1.04 Performance Requirements A. Skylight system shall be designed to support loads as specified by local building codes for the location ofthe project, described and /or specified herein as: 1. Positive Live Loads: a. Snow Load ................ PSF b. Wind Load ................ PSF c. Dead Load ................ lbs. 2. Negative Live Loads: a. Wind Load ................ PSF 3. Load Combinations: a. Snow Load + Dead Load b. Wind Load + Dead Load 4.The maximum allowable deflection of any framing member normal to the plane ofthe glass shall not exceed L /175. Spans of 20' 0" or greater shall not exceed a maximum allowable deflection of L/240. B. Manufacturer's system shall meet or exceed all performance standards as outlined by the following tests: 1. ASTM E283 (air infiltration) 2. ASTM E331 &AAMA 501 (water penetration) 3. AAMA 1502.7 (condensation resistance) C Thermal movement of system caused by ambient temperature ranges of -t70 degrees F without causing buckling, undue stress on structural elements, stresses on glass, failure of seals, performance reduction, or other detrimental effects. 1.05 Submittals A. Shop drawings as required to fully describe the skylight system shall be submitted and approved by the architect prior to starting any fabrication. B. Submit structural calculation (where applicable) by a licensed structural engineer (qualified in the design of self supporting sloped glazed structures) in accordance with the Aluminum Association's Specification for Aluminum Structures (SAS -30). C. Finished aluminum samples (color charts or range samples) and glazing samples shall be submitted and approved by the architect prior to starting amy fabrication. D. Submit manufacturer's written warranty as outlined in paragraph 1.07 ofthis specification. 1.06 Quality Assurance A.The skylight manufacturer shall be responsible for the design, fabrication, and installation ofthe skylight assembly. B. Substitute manufacturers will be considered only when all ofthe following conditions have been satisfied: 1. Alternate manufacturers must be approved by architect to bid not less than twenty (20) days prior to bid date. page 10 • A.I.A. Industries • 303.296.9696 2. Detailed drawings for alternate skylight system are submitted to architect for review. 3. Structural calculations, showing sizes of framing members and loads applied to the support structure, based on the design loads ofthe specification are submitted for review. 4. Prospective manufacturers must furnish evidence oftheir ability to perform, including a list of projects of similar design and complexity, within the last ten (10) years. 5. Prospective skylight systems must be manufactured by a firm with a minimum often (10) years experience in the fabrication and installation of custom aluminum framed skylights. 1.07 Warranty A. The skylight system shall be warranted for a period of () year(s) after substantial completion against defects in materials and workmanship. B. All glazing shall be warranted pursuant to the glazing manufacturer's standard warranties. Glass breakage is not covered by these warranties. C. All aluminum finishes are warranted pursuant to the suppliers standard warranty. D.The structural sealant is warranted for O year(s) pursuant to the sealant manufacturer's standard warranty of merchantable quality. Warranty shall certify that cured sealant: 1. Shall not become brittle or crack due to weathering or normal expansion and contraction of adjacent surfaces. 2. Shall not harden nor soften beyond a Shore'A" durometer of 30 points. 3. Shall not change color significantly when used with compatible backup materials. 4. Shall not bleed significantly. Part 2 - Products 2.01 Manufacturer A. Metal framed skylights shall be manufactured by: A.I.A. Industries, Inc. 290 East 56th Avenue Denver, Colorado 80216 303.296.9696 • Fax 3032962146 2.02 Materials A. Framing members: 1. Extruded aluminum shall have minimum mechanical properties equal to or greater that 6063-T5 alloy and temper. 2. Snap on covers and miscellaneous non - structural trim shall be the minimum thickness recommended by the manufacturer. B. Flashing: 1. All formed aluminum sheet shall be the required alloy and temper to be compatible with the specified finish, with aluminum thickness of 0.040 ". C. Fasteners and Anchors: 1. Exposed fasteners shall be stainless steel or zinc coated, unless otherwise noted. D. Glazing Material: Thickness to be determined by codes, glazing area loading conditions and manufacturers recommendations. 1. Insulating glass unit consisting of 1/4 inch tempered (specify color and /or coating) exterior lite; 112 inch air space; and ( ) inch clear (tempered) (laminated) (annealed interior lite with a 0.030 PVB interlayer) (heat strengthened interior lite with [0.030] [0.060] PVB interlayer.) 2. Laminated glass unit consisting of: ( ) inch (specify color and /or coating) laminated, heat strengthened glass with a (0.030) (0.060) PVB interlayer. 3. Insulating acrylic, unit consisting of O inch (clear, bronze, or gray) exterior lite; 1/2 inch air space; ( ) inch (clear or white) interior lite. The spacer bar shall allow for independent expansion and contraction ofthe interior and exterior lites. 4. () inch (polycarbonate) (acrylic) (double/ triple wall) unit (specify color). E. Glazing Gaskets: 1. Extruded black E.P.D.M. meeting or exceeding the following: a. Hardness (Shore A) 50 t durometer b. Tensile strength 2000 psi c. Elongation 50% F. Sealants: 1. Selection of sealants shall be the responsibility of the skylight manufacturer. 2. All surfaces shall be cleaned and primed within the sealant manufacturers guidelines. G. Finishes: 1. All exposed aluminum shall receive one or more ofthe following finishes (architect to select): a. Dark Bronze anodized. b. Clear anodized. c. Powder Coated, (standard color). d. Acrylic enamel (standard or custom color). e. Other: 2.03 Fabrication A. Skylights shall be shop fabricated to the greatest extent possible. B. All welding shall be done by inert gas process. C. System to be fabricated using integral condensate gutters and weep systems allowing any water penetration to drain to the outside. Part 3 - Execution 3.01 Installation A. Metal framed skylights shall be installed by: A.I.A. Industries, Inc. 290 East 56th Avenue Denver, Colorado 80216 303.296.9696 • Fax 3032962146 B. A.I.A. Industries Inc., may authorize a third party to install the skylight. C. Prior to installation, installer shall notify the general contractor of obvious deficiencies or dimensional errors in the support system and /or construction. No installation work shall proceed until all errors and deviations are corrected. Written authorization may be given to proceed with the as -built construction along with any price corrections. D. Adjacent and Support Construction Must Support Force Imposed By Skylight System. E. Skylight materials shall be installed in strict accordance with manufacturer's installation instructions and drawings. F. Install skylights plumb, level and true to line, without warp or rack of frames or panels and anchor securely in place in accordance with approved shop drawings. G. Contact areas between dissimilar metals shall be isolated with a protective coating or plastic strip to prevent electrolytic corrosion. H. Upon completion of installation, installer shall remove all labels, part number markings and excess sealants from skylight components. Weep system shall be clear of any and all obstructions. 3.02 Final Cleaning A. Final Cleaning and physical protection of all installed materials shall be the responsibility of the general contractor. - End of Section - Aluminum Systems - A.I.A.Industries'aluminum skylight systems utilize extruded aluminum members with integral condensate gutters, gasket pockets, concealed clips and fastners whenever possible, or welded connections. This offers a clean appearance which structurally meets the required design loads and deflection criteria of each project. All systems are designed to prevent air and moisture infiltration, utilizing gutter systems to channel any moisture to the exterior of the A.I.A. 2001 Non - Structural Slope Glazing System can be A.I.A. 2010 Structural Slope Glazing System is self applied to aluminum, wood, or steel structures provided supporting, utilizing extruded aluminum shapes to by the contractor. support the required loads of the entire skylight. Frame Finishes -The standard aluminum finish is dark bronze or clear anodize, but A.I.A. Industries also offers a full array of colors utilizing the latest powder coating techniques, enamel, Kynar ®, or mill finish aluminum. The exterior may also be clad with copper or other metals to match the surrounding roof or flashing materials. This wide range offers the design freedom to match any color with a durable, reliable, long lasting weather resistant finish. Glazing Materials -The ultimate success of a skylight installation depends on the selection and use of the proper glazing material and is one of the most important and far reaching decisions the architect and owner will make. This decision impacts the overall design, human comfort, energy efficiency, mechanical HVAC design and loads, daylighting, interior condensation control, ultra - violet fading, plant growth, and sound control. A.I.A. Industries offers glass, acrylic, polycarbonate, or translucent panel glazing options which will meet the design and performance criteria. The selection of the proper glazing material is critical to the performance and beauty of each skylight and should be evaluated taking into account "U" values, relative heat gain, shading coefficient, light and solar energy transmittance, ultra - violet protection, design loads as well as - Glazin Performance Data - Glazing Type Transm'ttance Shading Relative Heat Gain Insulating Properties Monolithic Glass t /4" Clear 88% 78% 0.95 204 1.09 Bronze 55% 50% 0.73 160 1.09 Insulated Glass 1" Clear 79% 61% 0.81 169 0.48 Bronze 48% 39% 0.58 124 0.48 Low E Glass 1" Clear 72% 51% 0.76 157 0.35 Bronze 45% 32% 0.52 110 0.35 Heat Mirror- 66 Glass 1" Clear 53% 26% 0.39 83 0.31 Bronze 32% 16% 0.28 62 0.31 Polycarbonate 16mm Triple Wall Clear 70% 63% 0.79 170 0.41 Bronze 42% 43% 0.65 142 0.41 Ice White 32% 43% 0.56 124 0.41 Polycarbonate 25mm Multi -Wall Clear 55% 52% 0.69 148 0.31 Bronze 20% 25% 0.45 99 0.31 Ice White 20% 20% 0.41 92 0.31 Acrylic 3/16" Single Glazed Clear 92% 85% 0.98 - 1.20 Standard White 56% 52% 0.56 - 1.20 Bronze 27% 35% 0.53 - 1.20 Acrylic Double Glazed Clear 92% 85% 0.89 - 0.70 Standard White 56% 52% 0.46 - 0.70 Bronze 27% 35% 0.43 - 0.70 Note:These figures are relative comparisons and may vary depending on manufacturer, thickness of materials, and actual tint. Contact A.I.A. Industries for more specific properties and a full selection of glazing materials. Plastic skylights are subject to formation of condensation between domes or layers. This may be objectionable when both layers are transparent. Expansion and contraction of plastic glazing may cause audible'popping' A.I.A. skylights are not designed to support people. Safety devices must be used around skylights for personal safety, contact A.I.A. Industries for specifics. A.I.A. Industries is continually improving its products and may change design, sizes, and details at any time. All information in this brochure is subject to change without notice. www.aiaindustries.com • A.I.A. Industries • page 11 Let your imagination Skylights for all weather conditions 17 Ft. x 53 Ft. Glass Atrium Proper attention to detail makes the difference! page 12 • A.I.A. Industries • 303.296.9696 i be your guide ... Glass Conservatory over Stairway / Elevator giving access to rooftop garden and patio Copper Clad Conservatory 14 Ft. Octagon Unequal Ridge skylight with electric operable panels for skylighting provides natural light for a friendly, cheerful, livin� space. www.aiaindustries.com • A.I.A. Industries • page 13 Custom Skylighting Requirements are not a thing of the past at A.I.A. Industries! Electric Operable Stairway Skylight/ door stays under height limitations of building, giving access to rooftop hot 12/12 pitch, Gable End Small Structural Skylights 22 Ft. Building Entrance Canopy Manual Sliding Stairway Skylight/ door for access to rooftop deck A.I.A. Industries offers innovative skylight designs to compliment any type of building page 14-A.I.A. Industries • 303.296.9696 Quality Installation The final key to successful skylighting is proper installation of a well designed, well fabricated skylight by our team of highly trained skylight installation professionals. A.I.A. Industries offers "One Source, One Responsibility" skylighting with our in -house installers, or A.I.A. approved installers, using state -of -the -art techniques and specialized equipment to complete the job properly. Job site conditions are often difficult due to weather, construction tolerances, coordination with various trades, installer safety considerations, handling of fragile materials on difficult slopes, or over roof openings. A.I.A. Industries strives to stay on schedule and do the finest job possible to www.aiaindustries.com • A.I.A. Industries • page 15 i Fire -Rated Recessed Light Enclosure Architects, specifiers and installers can easily maintain the integrity of fire -rated ceilings for one -hour by using the e.z. barrier enclosure for recessed lights. With the e.z. barrier one -hour fire -rated enclosure, recessed lights can be installed in a fraction of the time that it would take to hand -build an enclosure. Recessed Light Enclosure Model # ezb 16 -24 -9 (does not include recessed light) Once you fasten the four screws, your enclosure is ready to go. Simply install your light and you're on to the next one. You'll reduce time and labor costs while ensuring compliance to building codes. When it comes to one -hour fire -rated enclosures, count on e.z. barrier solutions from the fire -rated enclosure experts. We make it easy for you: Ez to install. Ez to save money. Ez to meet the fire code. 20777 kensington Blvd. Lakeville, MN 55044 Ph.952.985.8851 Fax 952.469.6565 sales @ezbarrier.net www.ezbarrier.com Proudly made in the USA Product Features for Model # ezb 16 -24 -9 • Fits both 16" and 24" on- center applications; one size fits most applications* • Attaches quickly with drywall screws, saving time and labor • Features 4 knockouts for wiring flexibility with easy access from any direction • Provides sound reduction • Stores and transports easily with tapered design • Maintains vapor barrier integrity to meet new "airtight building" codes • Maintenance free • Can be used on either interior or exterior applications • Can be used with either non IC rated or IC rated fixtures • Maintains air space even when using blown -in insulation to eliminate light fixture cycling • Affixed directly to the structure • No product modifications required. Reduces risk of incorrect product installation or movement during or after construction *For jobs that are narrower than 16" on- center, the adjustable ezb 16 -24 -9 split model may be an option; contact e.z. barrier to learn more. Meets One -Hour Fire - Rating Enclosure Codes Contains fire, gas, smoke and heat within the enclosure for 60 minutes, preventing leakage through the as- sembly into duct work. Meets the following codes: okhP9, • ASTM E119 -05a ?f y" • UL 263 Certified by Omega Point Laboratories • U BC 7-1 9°aRAZOa` • NFPA 251 ' "`•` *`' • ANSI A2.1 W Certified by Intertek & Warnock Hersey nauY Nt• Specifications • Flanges: 2 5/8" wide for easy mounting • Material: Corrosion - resistant metal • Internal Dimensions: 20 -1/8" long x 12" wide x 9 -1/2" deep • Stackable and packed 6 per case for easy shipping and handling 20777 kensington Blvd. Lakeville, MN 55044 Ph.952.985.8851 Fax 952.469.6565 sales @ezbarrier.net www.ezbarrier.com Proudly made in the USA Berridge Cee -Lock Snap Lock Standing Seam Roof System Page 1 of 9 Berridge Cee -Lock Standing Seam Roof Panel J — 16 -1 /z" =N E' 419mm IM TE M �r Cee -Lock Panel Cross Section http : / /www.benidge.com /ceelock.htm 3/24/2010 Berridge Cee -Lock Snap Lock Standing Seam Roof System INTEGRAL SNAP -LOCK SEAM W/P/ATENTED VINYL WEATHERSEAL rMyl Weatheraeat (OpflonaQ Cee-Lock Clip or Panel /Cee -Rib * U.S. Patent No. 4641475 ON PROPERTIES 13ASED ON 24 GAUGiE 40 K.S.I. � dl, (InIm) MA (Ft: IbslFv„ c � L NET VERTICAL LIVE LOAD NET vErMCAL WOO UPLIFT 1 -SPAN 2-SPAN 0.0567 87.0 610 (Feet) 0.0286 61.9 610 NOTES t. All loans rwi 1;1240 rJ41minn GrNeria. (c) bellectiam gowns a ww3Nes. 2_ %Wd Luad AluwableS u>creaSW by 33°.6. 3. Rvift 250 Lns f+ l Load wrthor► structural failure al cen*r c4 aaa haws,%v, fan taNic or panels &0; or after in0latipn can mm. delonnatm,% w--id, may lees) to destelic fadu,c. 4. V'Alues bases: uu IM6 ed 1W of AtSL March 1987 "ing S good engineer practice. Page 2 of 9 The Berridge Cee -Lock Standing Seam Roof System is an architectural and structural panel which carries a UL90 uplift rating and may be installed over solid sheathing. It may be roll formed on site with the Berridge Model CL -21 Portable Roll Former. Panel width is 16 -1/2" with a seam height of 1 -1/2 ". The unique integral snap lock batten incorporates the patented Berridge Vinyl Weatherseal. http : / /www.berridge.com/ceelock.htm 3/24/2010 INDS PER SQUAFIE Panel Weight = 1.3 P.S.L FOOT SPAN NET VERTICAL LIVE LOAD NET vErMCAL WOO UPLIFT 1 -SPAN 2-SPAN 3 -SPAN I—WAN 2 SPAN 3 -SPAN (Feet) Z-0 60 60 60 90 90 90 2' - 6 60 6o 60 80 90 90 7-0 60 53 60 55 90 60 55 38 45 40 74 63 W - 0 42 29 34 30d 57 55d 4'-6 33 23 27 20d 45 39d 6 - 0 1 27 18 21 15d 36 28d NOTES t. All loans rwi 1;1240 rJ41minn GrNeria. (c) bellectiam gowns a ww3Nes. 2_ %Wd Luad AluwableS u>creaSW by 33°.6. 3. Rvift 250 Lns f+ l Load wrthor► structural failure al cen*r c4 aaa haws,%v, fan taNic or panels &0; or after in0latipn can mm. delonnatm,% w--id, may lees) to destelic fadu,c. 4. V'Alues bases: uu IM6 ed 1W of AtSL March 1987 "ing S good engineer practice. Page 2 of 9 The Berridge Cee -Lock Standing Seam Roof System is an architectural and structural panel which carries a UL90 uplift rating and may be installed over solid sheathing. It may be roll formed on site with the Berridge Model CL -21 Portable Roll Former. Panel width is 16 -1/2" with a seam height of 1 -1/2 ". The unique integral snap lock batten incorporates the patented Berridge Vinyl Weatherseal. http : / /www.berridge.com/ceelock.htm 3/24/2010 Berridge Cee -Lock Snap Lock Standing Seam Roof System • Install over solid substrate • Easy to install, integral snap lock seam • Vinyl Weatherseal in seam (optional) • Continuous - length panels • UL90 & UL Fire Resistance listed • ASTM air & water tested • ASTM E -1592 tested Download Cee -Lock Installation Details: PDF File AutoCad DWG Details ASTM Air & Water Infiltration Reports Cee -Lock Specifications Page 3 of 9 To use these specs in your project document, just use your mouse to drag and select all specification copy, then copy to the clipboard (CTRL - C), then paste into an open document (CTRL -V). MANUFACTURER Berridge Manufacturing Company 1720 Maury Street Houston, Texas 77026 Phone: (800) 231 -8127 Outside TX (713) 223 -4971 In TX Fax: (713) 236 -9422 PDF Data Sheet (4 MB File) PDF File of Installation Details CEE -LOCK STANDING SEAM ROOF The Berridge Cee -Lock Standing Seam System is an architectural and structural panel which carries a UL 90 uplift rating. It may be roll- formed on site with the Berridge CL -21 Portable Roll Former, features an integral snap -lock seam and optional patented vinyl weatherseal. - Integral snap lock seam design - Patented vinyl weatherseal (optional) - For solid substrate http: / /www.berridge.com /ceelock.htm 3/24/2010 Berridge Cee -Lock Snap Lock Standing Seam Roof System - UL 90 & UL fire resistance listed - Continous length panels when site - formed - ASTM E 1592 tested - ASTM air & water tested PART 1 GENERAL 1.01 SECTION INCLUDES A. Preformed, prefinished metal roofing and flashings. B. Miscellaneous trim, flashing, closures, drip flashing, and accessories. C. Sealant D. Fastening devices. 1.02 RELATED SECTIONS A. Section 05120: Structural Steel Framing. B. Section 05500: Miscellaneous metal fabrication. C. Section 06100: Rough Carpentry. D. Section 07631: Flashing and Sheet Metal Gutters. E. Section 07900: Sealants. 1.03 REFERENCES Page 4 of 9 A. American Iron & Steel Institute (AISI) Specification for the Design of Coldformed Steel Structural Members. B. ASTM A-653 & ASTM A924 Steel Sheet, Zinc - Coated (Galvanized) C. ASTM E- 1680 -95 (Air Infiltration Test) D. ASTM E- 1646 -95 (Water Penetration Test) E. ASTM E -1592 F. Spec Data Sheet - Galvalume Sheet Metal by Bethlehem Corp, http : / /www.berridge.com /ceelock.htm 3/24/2010 Berridge Cee -Lock Snap Lock Standing Seam Roof System Page 5 of 9 G. SMACNA - Architectural Sheet Metal Manual. H. Building Materials Directory - Underwriter's Laboratories, Test Procedure 580. 1.04 ASSEMBLY DESCRIPTION A. The roofing assembly includes preformed sheet metal panels, related accessories, valleys, hips, ridges, eaves, corners, rakes, miscellaneous flashing and attaching devices. 1.05 SUBMITTALS A. Submit detailed drawings showing layout of panels, anchoring details, joint details, trim, flashing, and accessories. Show details of weatherproofing, terminations, and penetrations of metal work. B. Submit a sample of each type of roof panel, complete with factory finish. C. Submit results indicating compliance with minimum requirements of the following performance tests: 1. Air Infiltration ASTM E- 1680 -95 2. Water Infiltration ASTM E- 1646 -95 3. Wind Uplift - U.L.90 D. Submit calculations with registered engineer seal, verifying roof panel and attachment method resists wind pressures imposed on it pursuant to applicable building codes. 1.06 QUALITY ASSURANCE A. Manufacturer: Company specializing in Architectural Sheet Metal Products with ten (10) years minimum experience. B. No product substitutions shall be permitted without meeting specifications. C. Substitutions shall be submitted 10 Days prior to Bid Date and acceptance put forth in an addendum. D. No substitutions shall be made after the Bid Date. 1.07 DELIVERY, STORAGE AND HANDLING A. Upon receipt of panels and other materials, installer shall examine the shipment for damage and completeness. B. Panels should be stored in a clean, dry place. One end should be elevated to allow moisture to run off. http : / /www.berridge.com /ceelock.htm 3/24/2010 Berridge Cee -Lock Snap Lock Standing Seam Roof System Page 6 of 9 C. Panels with strippable film must not be stored in the open, exposed to the sun. D. Stack all materials to prevent damage and to allow for adequate ventilation. 1.08 WARRANTY A. Paint finish shall have a twenty year guarantee against cracking, peeling and fade (not to exceed 5 N.B.S. units). B. Galvalume material shall have a twenty year guarantee against failure due to corrosion, rupture or perforation. C. Applicator shall furnish guarantee covering watertightness of the roofing system for the period of two (2) years from the date of substantial completion. PART 2 PRODUCT 2.01 ACCEPTABLE MANUFACTURERS A. Berridge Manufacturing Company, Houston, Texas. B. Substitutions shall fully comply with specified require - ments. 2.02 SHEET MATERIALS A. Prefinished Metal shall be Hot - Dipped Galvanized - ASTM A446 -85 Grade C G90 Coating A525 -86 24 Gauge core steel or prefinished Galvalume - ASTM A792 -86 AZ -55. B. Unfinished Metal shall be Grade C Galvalume ASTM 792 -86, AZ 55, "Satin Finish ". C. Finish shall be [full strength Kynar 500 Fluoropolymer coating] [Copper- Cote][Lead -Cote] [Champagne] coating, applied by the manufacturer on a continuous coil coating line, with a top side dry film thickness of 0.70 to 0.90 mil over 0.25 to 0.35 mil prime coat, to provide a total dry film thickness of 0.95 to 1.25 mil. Bottom side shall be coated with primer with a dry film thickness of 0.25 mil. Finish shall conform to all tests for adhesion, flexibility, and longevity as specified by the Kynar 500 finish supplier. D. Strippable film shall be applied to the top side of the painted coil to protect the finish during fabrication, shipping and field handling. This strippable film must be removed before installation. 2.03 ACCESSORY MATERIALS A. Fasteners: [Galvanized Steel] [Stainless Steel] [Cadmium Plated Steel] with washers where required. B. Sealant: As specified in Section 07900 [ ] Type. C. Vinyl Weatherseal Insert. http : / /www.berridge.com /ceelock.htm 3/24/2010 Berridge Cee -Lock Snap Lock Standing Seam Roof System Page 7 of 9 2.04 FABRICATION A. All exposed adjacent flashing shall be of the same material and finish as the roof panels. B. Hem all exposed edges of flashing on underside, 1/2 inch. 2.05 BERRIDGE CEE -LOCK STANDING SEAM PANEL 1. Panels shall have 1-1/2" high vertical legs, spaced 16-1/2" on center. 2. Standing seam to be of an interlocking, "snap -lock" design. 3. Panels shall be site - formed with the Berridge Model CL -21 Portable Roll Former in continuous lengths from ridge to eave or factory- formed to maximum 40'. 4. Continuous Cee Rib to be 1 -3/8" wide and 2 -1/8" in height. Rib shall be connected to purlin with two #12 -14 x 1" self - drilling /tapping fasteners [Cee -Clips at 3-0" max.]. 5. Optional Vinyl Weatherseal (U.S. Patent No. 4641475) to be factory/machine - installed 6. When required, Panel assembly to bear Underwriter's Laboratories Label UL90, pursuant to Construction Number 334 and applicable Fire Ratings. 7. Certification shall be submitted, based on independent testing laboratory, indicating no measurable water penetration or air leakage through the system when tested in accordance with ASTM E- 1680 -95 and ASTM E- 1646 -95. PART 3 EXECUTION 3.01 INSPECTION A. Substrate: 1. Examine plywood or metal deck to ensure proper attachment to framing. 2. Inspect roof deck to verify deck is clean and smooth,free of depressions, waves or projections, level to +/ -1 /4" in 20', and properly sloped to [valleys] (or) [eaves]. 3. Verify roof openings, curbs, pipes, sleeves, ducts or vents through roof are solidly set, cant strips and reglets in place, and nailing strips located. 4. Verify deck is dry and free of snow or ice. [Flutes in steel deck to be clean and dry] or [joints in wood deck to be solidly supported and nailed]. B. Felting: 1. Verify #30 unperforated asphalt saturated roofing felt underlayment has been installed over solid sheathing and fastened in place. http : / /www.berridge.com /ceelock.htm 3/24/2010 .Berridge Cee -Lock Snap Lock Standing Seam Roof System Page 8 of 9 2. Ensure felt installed horizontally, starting at eave to ridge with a 6" minimum overlap and 18" endlaps. 3. Ensure that all nail heads are totally flush with the substrate. Nails shall be galvanized roofing nails with Berridge Coated Felt Caps. 3.02 INSTALLATION A. Comply with manufacturers standard instructions and conform to standards set forth in the Architectural Sheet Metal Manual published by SMACNA, in order to achieve a watertight installation. B. Install panels in such a manner that horizontal lines are true and level and vertical lines are plumb. C. Install starter and edge trim before installing roof panels. D. Remove protective strippable film prior to installation of roof panels. E. Attach panels using manufacturer's standard clips and fasteners, spaced in accordance with approved shop drawings. F. Install sealants for preformed roofing panels as approved on shop drawings. G. Do not allow panels or trim to come into contact with dissimilar materials. H. Do not allow traffic on completed roof. If required, provide cushioned walk boards. I. Protect installed roof panels and trim from damage caused by adjacent construction until completion of installation. J. Remove and replace any panels or components which are damaged beyond successful repair. 3.03 CLEANING A. Clean any grease, finger marks or stains from the panels per manufacturer's recommendations. B. Remove all scrap and construction debris from the site. 3.04 FINAL INSPECTION A. Final inspection will be performed by a firm appointed and paid for by the owner in accordance with section 01410. END OF SECTION NOTE: Please reference Berridge Manufacturing Company's current Sweet's Catalog http : / /www.berridge.com /ceelock.htm 3/24/2010 Berridge Cee -Lock Snap Lock Standing Seam Roof System Page 9 of 9 07610/BER , Sweet's BuyLine 49510, for standard product offering with regard to materials, gauges, finishes and colors available. Return to Factory Products page. Return to Home Page. http : / /www.berridge.com /ceelock.htm 3/24/2010 U Mark A. Ford From: Dana Bang [DBang c@ Berridge.com] Sent: Wednesday, March 17, 2010 1:50 PM To: Mark A. Ford Subject: Emailing: TGFU.R12005 - Roofing Systems UL Online Certifications Directory Home Quick Guide Contact Us UL.com TGFU.R12005 Roofing Systems Page Bottom Roofing Systems See General Information for Roofing Systems BERRIDGE MFG CO R12005 1720 MAURY ST HOUSTON, TX 77026 USA OTHER SYSTEMS CLASS A Coated steel panels (surfacing) identified as "Deep Vee ", "R ", "Tee ", "High Seam Tee ", "Zee Lock ", "Zee Lock Double Lock ", "Cee- Lock ", "Bermuda Roof', "M ", "S- Tile ", "S ", "Spanish Tile ", "Deep- Deck ", and "Double - Rib". 1. Deck: C -15/32 Incline: Unlimited Impact: Class 4 Barrier Board: — 1/4 in. (min). G -P Gypsum DensDeck® with all joints staggered a min of 6 in. from the plywood joints. Ply Sheet (Optional): — Any UL Classified Type Gl, G2 or G3 base/ply sheet, Type 15, 20 or 30 felt or UL Classified prepared roofing accessory or AIR Grace "Ice and Water Shield ". 1 Surfacing: — Coated Steel roofing panels, mechanically fastened. 2. Deck: NC Incline: No Limitations Impact: Class 4 "N Barrier Board: — 114 in. (min). G -P Gypsum DensDeck® . Ply Sheet (Optional): — Any UL Classified Type G1, G2 or G3 base /ply sheet, Type 15, 20 or 30 felt or UL Classified prepared roofing accessory or WR Grace "Ice and Water Shield ". Surfacing: — Coated Steel roofing panels, mechanically fastened. 3. Deck: NC Incline: No Limitations Impact: Class 4 Barrier Board: — 7/16 OBS or 5/8 in. plywood over polyisocyanurate insulation board or polyisocyanurate composite board, any thickness. Ply Sheet (Optional): — Any UL Classified Type G1, G2 or G3 base /ply sheet, Type 15, 20 or 30 felt or UL Classified prepared roofing accessory or WR Grace "Ice and Water Shield ". Surfacing: — Coated Steel roofing panels, mechanically fastened. 4. Deck: NC Incline: No Limitations Impact: Class 4 Barrier Board: — Polyisocyanurate, glass fiber, perlite or wood fiber, any thickness. Ply Sheet (Optional): — Any UL Classified Type G1, G2 or G3 base/ply sheet, Type 15, 20 or 30 felt or UL Classified prepared roofing accessory or WR Grace "Ice and Water Shield ". Surfacing: — Coated Steel roofing panels, mechanically fastened. 5. Deck: NC Incline: No Limitations Impact: Class 4 Surfacing: — Coated Steel roofing panels, mechanically attached to purlins. 6. Deck: C -15/32 Incline: No Limitations Impact: Class 4 Barrier Board: — 1/4 in. (min). G -P Gypsum DensDeck® with all joints staggered a min of 6 in. from the plywood joints. Ply Sheet (Optional): — Any UL Classified Type G1, G2 or G3 base/ply sheet, Type 15, 20 or 30 felt or UL Classified prepared roofing accessory or WR Grace "Ice and Water Shield ". Surfacing: — Coated Steel roofing panels, mechanically fastened. 7. Deck: C -15/32 or spaced sheathing Incline: Unlimited Underlayment: — One layer "VersaShield Underlayment ", mechanically fastened. Ply Sheet: — One layer Type 30 base sheet or "VersaShield ", mechanically fastened. Surfacing: — Coated Steel roofing panels, mechanically fastened. 8. Deck: C -15/32 or spaced sheathing Incline: Unlimited Underlayment: — One or more plies "VersaShield Underlayment ", mechanically fastened. Surfacing: — Coated Steel roofing panels, mechanically fastened. Class C Coated steel panels (surfacing) identified as "Deep Vee ", "R ", "Tee ", "High Seam Tee ", "Zee Lock ", "Zee Lock Double Lock ", "Cee- Lock ", "Bermuda Roof', "M ", "S- Tile ", "S ", "Spanish Tile ", "Deep- Deck ", and "Double - Rib". Deck: NC Incline: No Limitations Impact: Class 4 Surfacing: — Coated Steel roofing panels, mechanically fastened. Last Updated on 2010 -02 Questions? Notice of Disclaimer Page!' Copyright © 2010 Underwriters Laboratories Inc.® The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow -Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow -Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non - misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2010 Underwriters Laboratories Inc.®" An independent organization working for a safer world with integrity, precision and knowledge. ,47 �►r 1 2009 IECC - Chapter 4 Compliance Residential Residence: RSA Base Date: 3/24/2010 Submittal: PERMIT RESUBMITTAL 1 High Efficacy Definition: Less than 15W - Greater than or equal to 40 Lumens /Watt 15W to 40W - Greater than or equal to 50 Lumens /Watt Greater than 40W - Greater than or equal to 60 Lumens/Watt ROBERT SINGER ASSOCIATES INC. DESIGN CONSULTANTS LIGHTING SPECIALISTS po box 8929 aspen-co 81621 T 970_963_5692 Eff icacy High • Number of Wattage Fixture .- • B 82 50 1250 25 - 82 C 3 50 1250 25 - 3 C2 4 10 140 14 - 4 D (9.25in) 1 5.5 150 27 - 1 D (39.25in) 1 20 524 26 - 1 F1 4 18 1130 63 4 - K 240 0.71 36 51 240 - K1 (37in) 3 26 1641 63 3 - M 2 50 1250 25 - 2 R (12in) 23 1.52 143 94 23 - TA 6 50 1250 25 - 6 U 9 5.5 350 64 9 - Decorative 46 60 870 15 - 46 Totals 279 145 Pass High Efficacy Definition: Less than 15W - Greater than or equal to 40 Lumens /Watt 15W to 40W - Greater than or equal to 50 Lumens /Watt Greater than 40W - Greater than or equal to 60 Lumens/Watt ROBERT SINGER ASSOCIATES INC. DESIGN CONSULTANTS LIGHTING SPECIALISTS po box 8929 aspen-co 81621 T 970_963_5692 ROOFSYSTEMS Titan OCdWorldSCate Features Authentic, genuine design Class A or C Fire Rating & Class 4 Impact Rating Lightweight Easy installation No breakage No special tools required Cuts and nails with ease Able to walk on roof 1" thick profile Cavity back profile Color is completely through the product not on the surface only Solid Accessories- reduces cost of valley installations Accessories Starter Hip and Ridge Solid Tile Accessory ;Ve-1vb tte sate Black Green, Brown Benefits Architecturally elegant, durable roofline Added protection; May reduce insurance premium No additional structural support required Installation cost savings Optional staggered application Realistic multi - coloring available 50 Year Limited Warranty Investment protection Allows for authentic look tr Specifications Tile: Exposure 10" Pieces per Square 117 Lbs. per Square 304 Dimensions 12 1/8" x 24" Starter: 10.5' Length x 12 ' /e "t 1 /8" Width Hip and Ridge: 16" Length x 6" x 5 -5/8" Width Solid Tile Accessory: 22 ' /8" t ' /8" Length x 12 1/8 "t 1/8" Width Titan mfg. Roof Systems Elegance That Endures Colors Red Old World Slate Brown Old World Slate Green Old World Slate Black Old World Slate Gray Old World Slate Charcoal Old World Slate Atlantic Old World Slate Cottage Old World Slate English Old World Slate Newcastle Old World Slate Victorian Old World Slate c "wan y —y scgMly t Macs i .Slate Roofing Testing, Old World - Titan Roof Systems TITAN ROOF SYSTEMS Eur;r�,urrrt•-rt:allti Frt���,. !' .. ' . . _.!, C' �.. ROOF SYST9 S For t tr r Roof Tile Roof Tile > Slate Roofing > Titan Old World Slate Barrel Tile Shake Roofing Slate Roofing > Titan Old World Slate > Titan Slate Commercial Roofing Residential Roofing Recyded Roofing "Green" Roof White Roof FAQS Titan Old World Slate Roofing Testing Titan Old World Slate Roofing has passed the stringent testing required for premium roofing products, earning a Class 4 impact rating and Class A and Class C fire rating. These are the highest ratings available in the roofing industry. Titan not only tests to industry standards and requirements, but does additional testing to assure outstanding performance. Page 1 of 1 TITAN OLD WORLD SLATE ROOFING • Specifications • Accessories • Installation • Product Testing • Gallery • Spec Sheet • Product Comparison Testing Performed Standard Met Titan Old World Slate - Class A Titan Old World Slate - Class C Weatherometer ASTM G 26 Pass Pass Fire Resistance UBC 15 -2; ASTM E 108; or UL 790 Class A Class C Impact Resistance UL 2218 Class 4 Class 4 Wind Resistance ASTM D 3161; Pass pending Uplift Bend ICC -ES AC07, Section 4.4 Pass Pass Temperature- ICC -ES AC07, Section 4.9 Pass Pass Penetration ICC -ES AC07. Section 4.5 Pass Pass Have questions or need a quote? > > Far Architects I For Developers I For Hon —ers I Home I About Us I Catalog I Contact I Site Map I Roof Tile I Commercial Roofing I Residential Roofing I Recycled Roofing I Green Roof I Wnite Roof I FAGS I C' 2007 Titan MFG Roof Systems. All rights reserved. Website created by and SEO prwided by Upnght Communications http: / /www.titanroofsystems.com /roof -tile/ slate - roofing/ow- slate - testing.htm 3/25/2010 .Slate Roofing Specifications, Old World - Titan Roof Systems TITANMFG ROOF SYSTEMS ROOT SYSTEMS For r Developers r kvui i tie - Slate Rooting > Titan Old World Slate Roof Tile Barrel Tile Titan Old World Slate Shake Roofing Titan Old World Slate Roofing - Specifications Slate Roofing • Product Testing > Titan Old World Slate Titan Old World Slate is the ideal replication > Titan Slate of slate roofing. Titan's Old World Slate _— __...._ _ _ composite roofing product is an extremely Commercial Roofing attractive alternative to concrete tile or 340 slate roofing systems. Its lighter weight 24" t Ys" design eliminates the need for costly, Residential Roofing reinforced structural support, and it is more 12 1/8" t + /s" efficient to install. The advanced, multi - Recycled Roofing colored offerings provide a natural, architecturally elegant roofing system. It "Green" Roof truly gives the distinctive impression of a custom roofing design. Page 1 of 1 TITAN OLD WORLD SLATE ROOFING White Roof Specifications: Titan Old World Slate -- - - - - Specifications for Titan Old World Slate .Specifications FAQS recommend exposure at 10" but this may • Accessories • Installation be adjusted to a lower measurement if • Product Testing desired or if a staggered application is used • Gallery to achieve a rustic appearance. • Spec Sheet 117 . Product Comparison Profile Titan Old World Slate 10 Class A Class C Exposure 10" 10" Weight /Piece (lb.) 2.96 f 0. 2.85 t 0.1 Pieces /Square 117 117 Lb. /Square 355 340 Height 24" t Ys" 24" Width 12 1/8" t 1 /8" 12 1/8" t + /s" Pieces /Bundle 10 10 Pieces /Pallet 585 585 Lb. /Pallet 1700 approx 1700 approx Bundles /Square 11.7 11.7 Squares /Pallet 5 5 Fire Rating Class A Class C Impact Rating Class 4 Class 4 Have questions or need a quote? > > For Architects I For Developers I For Homeowners I Home I About Us I Catalog I Contact I Site Map I Roof Tile I Commercial Roofing I Residential Roofing I Recycled Roofing I Green Roof I White Roof I FAGS I -_ 2007 Titan MFG Roof Systems. All dghts reserved. Website created by and SEO provided by Upright Communications http: / /www.titanroofsystems.com /roof -tile /slate - roofing/ow- slate- spec.htm 3/25/2010 Apr ( ; 10 07:51p 369 p • 1 SPECIAL INSPECTION AND TESTING AGREEMENT (To applicants of projects requiring Special Inspection or Testing per Section 1701 of the IBC) The owner or his/her representative, on the advice of the design professional in responsible charge, shall complete, seal, sign and submit a copy of the Special Inspection Agreement and Structural Tests Scheduled to the Town of VaH for review and approval. Signatures are required on both pages; photocopied or faxed signatures are acceptable. The owner and his /her general contractor, where applicable, shall also acknowledge the following conditions applicable to Special Inspection Testing: 1. Contractor is responsible for proper notification to the Inspection or Testing agency for items listed.(Page 1) (IBC 1704) 2. Only the testing laboratory should take samples and transport them to their laboratory. 3. Copies of all laboratory reports and Inspections are to be sent directly to the Town of Vail by the Testing agency on a weekly basis. 4. Inspection agency to submit names and qualifications of on -site special inspectors to the Town of Vail for review and approval.( Page 2) 5. The special inspector is responsible to immediately notify the Town of Vail Building Ot icial in writing of any concerns and /or problems encountered. 6. It is the responsibility of the contractor to review the Town of Vail approved plans for additional inspection or testing requirements that may be noted. A pre - construction conference at the job site is recommended to review special inspection procedures. 7. The special inspector shall use only the Town of Vail approved drawings. 8. All special inspection field reports must be left on site for review by the Town of Vail staff prior to required inspections or re- inspections. BEFORE OCCUPANCY WILL BE GRANTED: The special inspection agency shall submit a signed and sealed statement that all items requiring testing and inspection were fulfilled and reported. Those items not tested and/or inspected shall be noted in this statement. A copy of the statement shall be maintained at the job sit for th@ Building Inspectors review prior to final inspection. l i Acknowledgement: ! !' Owner.- s5naWr ` Print Name Data: i - Special Inspection Agenc)r. / �4 ER'r • QO \ \oC 'Z' Signature Print Name Date ArchlEng: Project Jane SbH cr 4 — 2 —1 C) sign re Print Na Date Contractor. — U* Signature Print Name I Dale L ��0 gIL I O TOWN SPECIAL INSPECTION AND TESTING SCHEDULE (IBC 1704) Project Name: Permit # Owner's Name: R:T \� , Testing Inspection Signature Print Name Date Agency: ��, z � � � _ T 90MI A , %\�� 4 "Z! f-*S Testing Inspection Signature Print Name Date Hereby certifies that the Testing /Inspection Agency named above has been engaged to perform structural tests and inspections during construction as checked below, to satisfy all applicable portions of the Building Code. Prior to final inspection, the Inspection Agency shall submit a statement that all items of designated work performed were reported. Any items checked but not tested or inspected will be noted and explained. Whenever any designated items on the list are ready for sampling, testing, or inspection, it shall be the responsibility of the contractor to give timely notice to the Inspection agency so that the required services may be performed. REINFORCING STEEL: Tensile & Bend, one set per heat per tons Inspection of Placement Inspection of Welding Epoxy MASONRY: Prelim. Acceptance Tests (Masonry Units, Wall Prisms) Subsequent Tests (Mortar, Grout, Field Wall Prisms) Inspection of Placement and Grouting CONCRETE. SHOTCRETE, GROUT AND MORTAR Concrete Shot Grout Mortar Aggregate tests for design Suitability of aggregates Mix Designs Test Panel Batch Plant Inspection Cement Grab Sample Inspect Placing Compression Tests Cast Specimens Pick -up Samples Shrinkage Bars Yield Check Air Check Dry Unit Weight PRECAST CONCRETE: Reinforcing Tests Inspection of Reinforcing Placement Tendon Tests Inspection of Tendon Placement Inspection of Concrete Placement Inspection of Concrete Batching Inspection of Panel Attachment & Inserts Compression Tests Inspection of Stressing/Transfer PILING, CAISSONS, CAPS, TIES: Inspection of Reinforcing Placement Inspection of Concrete Placement Inspection of Concrete Batching Specify other tests, inspections or special instructions required. ME UNDERPINNING: Temporary/Permanent Inspection of Steel Fabrication Inspection of Reinforcing & Forms Inspection of Concrete Placement Inspection of Tiebacks SOIL NAILS: Temporary Shoring Permanent Wall STRUCTURAL STEEL: Sample & Test (List specific members below) Shop Identification & Welding Inspection _ Shop Ultrasonic Inspection Shop Radiography Field Welding Inspection Field Bolting Inspection Field Ultrasonic Inspection X Field Radiography Y_ Metal Deck Welding Inspection FIREPROOFING: Inspection & Placement SOILS: Acceptance Tests Moisture - Density Determination Field Density Drilled Piers Deep Foundation STRUCTURAL WOOD: Inspection of Fabrication Inspection of Truss Joint Fabrication Sample & Test Components Inspection of Glu Lam Fabrication SMOKE CONTROL: SPECIAL CASES: SPECIAL INSPECTION: Seismic Resistance Wind Requirements I' I'l APR 13 2010 D TO— WN �F VAIL ROBERT SINGER 8 ASSOCIATES INC. GRAND ANNEX VAIL MOUNTAIN LODGE VAIL, CO PERMIT RESUBMITTAL 2 > v o W LIGHTING PLANS o CJ F- um DECORATIVE SCHEDULE LAW 0 SPECIFICA TIONS LUTRONLOAD SCHEDULE L UTRON ENCL OSURE SCHEDULE 2009 IECC APRIL 8, 2010 eLumit - Fixture Schedule 4 A a v � Lighting Fixture Schedule Grand Annex Decorative Page 1 of 2 Type Mfr /Catalog # Lamping Notes ID1 30OW Incandescent Location: Lower powder room Description: Pendant TBD by Interior Allocation Quantity: 1 Designer Contractor to coordinate support for moc of fixture based on weight prior to rough - be determined by Interior Designer/ Owr RSA to approve upon selection. I102 150W Incandescent Location: Living Room r Description: Fireplace decorative Allocation Quantity: 2 :i sconce Contractor to coordinate support for moc of fixture based on weight prior to rough - be determined by Interior Designer/ Owr ID3 150W Incandescent Location: Exterior Description: Round Wall Sconce TBD Allocation Quantity: 2 by Interior Designer Round Wail Sconce TBD by Interior Des To be determined by Interior Designer/ C RSA to approve upon selection. 1D4 30OW Incandescent Location: Master Bedroom Description: Pendant TBD by Interior Allocation Quantity: 1 -E)- Designer Contractor to coordinate support for moc of fixture based on weight prior to rough - be determined by Interior Designer/ Owr RSA to approve upon selection. ID5 150W Incandescent Location: Master Bathroom Description: Round Wall Sconce TBD Allocation Quantity: 4 by Interior Designer Round Wall Sconce TBD by Interior Des To be determined by Interior Designer/ C RSA to approve upon selection. ID7 Wyeth 124 Location: Kitchen counter j ( Description: A ceiling lamp with a Quantity: 2 vintage opalescent milk glass disc Contractor to coordinate support for mot, shade of fixture based on weight prior to rough - 1D8 150W Incandescent Location: Upper Guest Bathroom Description: Round Wall Sconce TBD Allocation Quantity: 3 by Interior Designer Round Wall Sconce TBD by Interior Des To be determined by Interior Designer/ C RSA to approve upon selection. ID9 Wyeth 4286 Location: Stairwell Description: A caged utility light with a Quantity: 1 wooden handle Contractor to coordinate support for moc of fixture based on weight prior to rough - ID9 Wyeth 4435 Location: Stairwell Description: A steel caged ceiling light Quantity: 3 Contractor to coordinate support for mop of fixture based on weight prior to rough - ID10 150W Incandescent Location: Bunk Bathroom Description: Round Wall Sconce TBD Allocation Quantity: 3 by Interior Designer Round Wall Sconce TBD by Interior Des To be determined by Interior Designer/ C RSA to approve upon selection. http:// www. elumit. com /myelumit/popFixtureSchedule .aspx ?ProjectID =3356 3/24/2010 T eLumit - Fixture Schedule Page 2 of 2 ID11 150W Incandescent Location: VML hall entry Description: Round Wall Sconce TBD by Interior Designer Allocation Quantity: 1 Round Wall Sconce TBD by Interior Des To be determined by Interior Designer/ C RSA to approve upon selection. ID12 150W Incandescent Location: Master Patio Description: Round Wall Sconce TBD Allocation Quantity: 1 by Interior Designer Round Wall Sconce TBD by Interior Des To be determined by Interior Designer/ C RSA to approve upon selection. ID13 30OW Incandescent Location: Bath 1 Description: Pendant TBD by Interior Allocation Quantity: 1 Designer Contractor to coordinate support for mop of fixture based on weight prior to rough - be determined by Interior Designer/ Owr RSA to approve upon selection. ID14 150W Incandescent Location: Master Bedroom Description: Swing Arm Allocation Quantity: 2 To be determined by Interior Designer/ C RSA to approve upon selection. ID15 150W Incandescent Location: BED 2 Description: Swing Arm Allocation Quantity: 2 To be determined by Interior Designer/ C RSA to approve upon selection. ID16 Solavanti Lighting 146522 1W LED Location: Bunkroom Description: Recessed mounted warm Quantity: 3 white led swing arm Location to be coordinated with Interiors Architect, robert singer and associates 655 east valley road suite 200 basalt, CO 81621 United States http:// www. elumit. com /myelumit/popFixtureSchedule .aspx ?ProjectID =3356 3/24/2010 . r ] PROJECT: Grand Annex Decorative DATE: FEBRUARY 26, 2010 TYPE: ID2 CATALOG #: Page 1 of 1 LAMP: 150W Incandescent Allocation 1 �/ ♦ / S PROJECT: Grand Annex Decorative DATE: FEBRUARY 26, 2010 TYPE: IN }CATALOG #: 124 Page 1 of 1 I LAMP: Wyeth Home beds lighting mirrors objects seating desk storage amps tables ceiling lamps tribal wall lamps sho —ooffi5br lamps table lamps Page I of 1 tnn / liohtina ..ellno lama 'item 124 previous next 315 Spring Street New York, NY 10013 212.243.3661 irfo0 .th —.com ®2007 wyeth. all rights reserved designed by gani —sd http: //76.74. 250.39 /— wyethomelindex.php? option= com_wyeth &task= showlmage &image =... 2/22/2010 a PROJECT: Grand Annex Decorative DATE: FEBRUARY 26, 2010 TYPE: ID9 CATALOG #: 4286 Page 1 of 1 LAMP: Wyeth Home beds lighting mirrors objects seating desk storage amps ceiling tables lamps tribal wall lamps showrooffAr lamps table lamps 286 previous next 315 Spring Street New York, NY 10013 212.243.3661 into@wyetnome — 02007 wYeth. all rights reserved designed by g--ed Page I of 1 http: //76.74. 250.39 /— wyethomelindex.php? option= com_wyeth &task= showlmage& image =... 2/22/2010 C PROJECT: Grand Annex Decorative DATE: FEBRUARY 26, 2010 TYPE: ID9 1 CATALOG #: 4435 Page 1 of 1 I LAMP: Wyeth Home bees lighting mirrors objects seating desk ps storage am tables ceding lamps tribal wall lamps showroo %r lamps table lamps for / lighting Page 1 of 1 315 Spring Street New York, NY 10013 212.243.3661 inf,g- Yethome com 40200] w — Ni righls reserve! aesyned by 9eluwirecl http: //76.74. 250. 39 /-- wyethome /index.php ?option =com wyeth&task=show Image& image=... 2/22/2010 PROJECT: Grand Annex Decorative �. tl DATE: FEBRUARY 26, 2010 TYPE: ID16 CATALOG #: 146522 Page 1 of 1 LAMP: 1W LED Product Display - Solavanti Lighting Page I of I IVED GOOSENECK WITH FITTING BOX, WARM WHITE Product PC', e IVED GOOSENECK WITH FITTING BOX, WARM Product Locator WHITE Product Overview Indoor Article Number 116522 Product variants IVED GOOSENECK WITH CANOPY WHITE 146511 IVED GOOSENECK WITH CANOPY, WARM 146512 Outdoor WHITE LED IVED GOOSE, CHROME, LED WHITE 146552 LED Strips IVED GOOSE, CHROME. LED WARM WHITE. 146559 CHROME LED RGB Strips IVED GOOSENECK FOR RECESS MOUNTING. 146521 LED Bulbs WHITE LED RGB Bulbs bulb Power LED 1 Watt bulb included yes LED Wall Lights cutout diam. 268 in LED Ceiling recessed fittings fitting depth 244 :n LED Surface mounted fittings length width height 11 02 in 3.15 in 1 97 in diameter dlam. 1.38 LED Wall recessed fittings voltage 120 Volt LED Ground Spots max. load 1 Watt LED Outdoor Lights material aluminium remarks built -in LED driver included LED Light Chains with buitt-in power switch LED Controllers cavity wall box included weight 0.551 It, LED Driver / Power units Bulbs Accessories Catalogs and Contact Information Legal Notes Links Efficient -Tec International S3 Stainless Steel Systems Solavanti Lighting DESIGN Solavanti Lighting PERFORMANCE Solavano Lighting HOME http:// catalog2009. solavantilighting .com/main.php5 ?g _page= 209 &g_menu = 325 &g_arnr = l ... 3/4/2010 eLumit - Fixture Schedule Page 1 of 2 Lighting Fixture Schedule Grand Annex Type Mfr /Catalog # Lamping Notes B Cooper Ltg - Iris P3MR -E3PIN 1 - GE Precise Q50 /MR16 /C/ Location: General Accent Downlight Description: 4" recessed halogen Spread TBD Contractor to paint trim to match ceiling 411M accent light with 1 -MR16 50W lamp. color. C Cooper Ltg -Iris P3MR- 1 - GE Precise Location: Shower Downlight E3AASRPIN Q50 /MR16 /C /Spread TBD Contractor to paint trim to match ceiling 4M Description: 3" Recessed halogen adjustable shower downlight with 1- MR16 50W lamp. C2 BEGA -US 2139 - * ** 1 - 10W T3 G4, 12V Location: Bunkroom Shower Description: 3 -1/8" round recessed ® light with 1 -10W max lamp. D Philips /Color Kinetics 523- 1 - 2700 °K LED Location: Kitchen / / 000027 - * *, with all required components. Description: Surface - mounted LED task light. F1 Ledalite 9711- D1- ST- B118 -S- 1 - (1)775 18W Location: Laundry and Pantry 1 -1 -E w /Hanger Kit Description: 1x1 Recessed Fluorescent K Ardee Lighting CRK- * -W -C- 1 - 2800 °K LED Location: Cove Lighting * *- *- S- -0000, w /HPL.IA -284- Contractor to measure and field verify 0 -00 appropriate fixture segment lengths and Description: Surface - mounted xenon quantities. Remote transformer location by strip light, flexible housing with 1- EC. Recommend Semper Fi transformer. festoon base 1W LED lamp. K1 LED Power AL -HB4 ** -WASP- 1 - 2800 °K 25° LED Location: Stairwell 25 Contractor to measure and field verify Description: Linear LED appropriate fixture segment lengths and - quantities. Remote power supply location by EC. LT Prima Lighting 8894 / WH / W 1 -1.2W x 18SSC P4 LEDs, Location: Bunkroom Description: 8" square LED recess 90° Beam Angle downlight M Bruck Lighting 220470mc, 1 - GE Precise QMR16 /C/", Location: Living Room w/ 156000mc SPREAD TBD Remote transformer location by E.C. Description: Ceiling - mounted halogen Recommend Semper Fl Transformer. accent light with 1 -MR16 50W max lamp. R GMLighting LTR300WP -SO- 1 - 3500 °K Warm White LED Location: Powder Room / Bunkroom WW, w /LTH - ** -DIM Contractor to measure and field veify Description: linear LED appropriate fixture segment lenths and quantities. Remote power supply location by EC. T1 Bruck Lighting 17001 *megy, 1 - Refer to fixture type 'TA Location: Truss With all required components. option' Contractor to measure and field verify Description: Wall monorail appropriate fixture segment lengths and quantities. Remote transformer location by EC. Recommend Semper Fi transformer. With all required components. http:// www. elumit. com /myelumit/popFixtureSchedule .aspx ?ProjectID =3352 4/7/2010 eLumit - Fixture Schedule TA Bruck Lighting 220470mc, Rated w /170050mcgy Enclosure Description: Wall- mounted halogen accent light with 1 -MR 16 50W max MR -16 lamp. u / Bronzart Lighting RD -CL -SS Description: LED uplight �.i MR16 Control Lutron H8P5 - ** -120 MR -16 Description: Lutro n Control Processor Fire- E.Z. BARRIER EZB 16 -24 -9, Rated With all required components. Enclosure Description: 1 hourfire -rated enlcosure for recessed lights. MR -16 GE GE Precise Q50 /MR16 /C /Spread TBD Description: Constant Color 50W MR16 LED MS- MR16- 28- 30 -12V -D MR -16 Description: LED MR16 TR Semper Fi * - * - *- 120- *- * -C * -* Description: robert singer and associates 655 east valley road suite 200 basalt, CO 81621 United States Page 2 of 2 1 - GE Precise QMR16 /C/", Location: Truss SPREAD TBD Remote transformer location by E.C. Recommend Semper Fl Transformer. 1 -Warm White LED MR16 Location: Uplights Remote transformer location by E.C. Recommend Semper Fl Transformer. Location: Electrical Room Exact specifications to be coordinated with circuiting and lighting plans and specifications. Location: 1 hour ceilings 1 hour assembly at all recessed lights located in the 1 hour ceilings. Location: Recessed downlights Spread TBD and noted on lamping guide. Location: Recessed downlights CUT SHEET TO BE ISSUED. Spread TBD and noted on lamping guide. To be determined by Electrical Contractor. http:// www. elumit. com /myelumit/popFixtureSchedule .aspx ?ProjectID =3352 4/7/2010 . S � / PROJECT: Grand Annex [1 DATE: 4/7/2010 TYPE: B CATALOG #: P3MR -E3PIN Page 1 of 2 LAMP: GE Precise Q50 /MR16 /C/ Spread TBD IRIS CATALOG #: TYPE DESCRIPTION Clips (for 10 Units) Specification grade 50 watt MR16 _ __..._ _ _ _ H adjustable pinhole fixture rated for Extension for Max 2" Thick direct contact with insulation. Ceiling Adjustment mechanism features hot FMC3 = Flush Mount Collar aiming capability, aiming marks and F------- - - - - -- - - - -- tooless locking. Pinhole minimizes ----- ---------- - - - - -- e c apert ure appearance, and reflector pro- I - ------ 0 : =` vides 50, cutoff to lamp and lamp image. For use with all halogen MR16 I a ....A - - -- 3 lamp varieties. Optical element can be For additional options please consult factory. changed after installation to provide a p ......................_.....;'; I variety of distributions e.g. into a L................ .' t 1/4 downlight. 4 3/8' .48 112mm1 5 1/8' SPECIFICATION FEATURES 1130mm1 A... Reflector .040 thick aluminum spun parabolic interior reflector in Black Alzak' finish. Die -cast 1.25" occulus with knife edge produces dark aperture. Occulus with either flat black or white finish. B. Flange Self flange reflector or die -cast flange with either matte white or clear coat finish. Die -cast flanges are easily removed for field painting. Elements are keyed for proper insertion. C Adjustability Removable lamp adjustment mechanism provides up to 45° tilt and 361 o rotation and locks into any aiming position. Unit is relamped without unlocking adjustments. Translating centerbeam optics maxi- mize light output. D Lens Up to two filter media can be used which are retained during relamping E - Attachment Positive torsion springs pull flange tight to ceiling. Mechanical light trap eliminates spill light at edge of flange or reflector. F. Socket GX5.3 base for Bi -pin MR16 lamps. Back light shield keeps interior of fixture dark. G Transformer Truvolt toroidal transformer with dual- output taps for proper 12.OV operation. Dimmer tap compen- sates for inherent voltage loss from dimmers, resulting in 30% more lumens than traditional lami- nated transformers. Toroidal design, with 90% or greater efficiency, features a rolled one -piece con- tinuous core of M3 grade grain oriented silicon steel complete with an integral thermal to protect against overheating and ensure quiet operation. For ORDERING INFORMATION Complete unit consists of a platform and element Optical Platform Element Fl dimming, use dimmers rated for electromagnetic transformers. Transformer is warranted for 5 years and is serviceable from below ceiling. Note: If a dimming system is operated for con- struction lighting in its "shunt" mode, i.e. bypass- ing the dimmer modules, for an extended period of time, fixtures with the dual -tap toroidal transformer should be operated on the "Switched Fixture" out- put until the dimmers are in use. Operating fixtures on the "Dimmed Fixture" output with a full 120v input for an extended period will overdrive the lamp and cause shortened lamp life. Hl- Frame /Housing Hot dipped galvanized 20 gauge steel frame with built in 1/2 inch plaster lip. Gunsights allow for consistent alignment. Aluminum .032 thick housing allows for heat dissipation and reduces weight. Matte black housing interior. I ...Junction Box 18 cubic inches, listed for 4 #12 AWG or 6 #14 AWG 901 C additional feed through conductors, has six 1/2 inch pryouts. J Bar Hangers No Flex' bar hangers with positive locking, for use with wood, engineered wood and steel frame joists spaced up to 24" O.C. ship with platform. For use in T -bar ceilings order accessory MBCLP. Nailess barb and locator lip provide consistent installation height. K - Codes Thermally protected, IP labeled, for use in direct contact with insulation. Meets Washington State Air tight requirements, 1995 CABO Model Energy Code. L Labels UL and cUL listed, standard damp label, IBEW union made. P3MR = 3.5' E3PIN = MR16 1- Blank = White die -cast Airtight IC Rated 1/4' 45° Adjustable with Black Occulus' Low Voltage Pinhole W = White with white Housing E3PINLARGE = occulus' P3MR REMOTE MR16 2' 45° Adjustable Pinhole POL = Polished = 3.5' Airtight Aluminum with Black IC Rated Housing E30VAL = Oval for Remote Pinhole Occulus' Transformer E3PINRD = Radius SAL = Satin Aluminum Edges with Black Occulus' RAW—= Raw Die -cast with black Occulus' COOPER LIGHTING Accessories MBCLP = 40 Push On T Bar LLPINK = Light Pink Lens Clips (for 10 Units) LLSTRAW = Light Straw Lens PLE3 = Plaster Lip L27K = 2700K dichroic filter Extension for Max 2" Thick LDAY = Daylight Lens Ceiling LV = Surprise Pink Lens FMC3 = Flush Mount Collar LEPLA =Pale Lavender Lens LSPD = Spread Lens LHX EX= Hex Cell Louver LLNR = Linear Spread Lens 1 0-1., o" E3PIN o„ly LUV = UV Reduction Lens 2 E3PIN and E3PIN large LSNOOT =SNOOT 37 For additional options please consult factory. P3MR E3PIN 5OW MR16 3" ADJUSTABLE PINHOLE 9' 1229.m1 15 3/4' 7 7/8' 10' 1401mml 120, lmml-i �.t254mm1 PINHOLE ELEMENT VARIETIES (PLAN VIEW) E3PIN E3PINW E3PINPOL E3PINSAL E3PINRAW E3PINLARGE E3PINLARGE RAW E3PINR0 E30VAL t tM'132nxn1 O L3 /4' 144mmII 5 1x1' 1130mm1 O L3/4•I41mm1 n3omml 2 3 2,3B' /8' I 1 3la' 135m 1 5 1/9' n3omml Energy Data 120V Input Lamp Input Operating Watts Watts Current 20 23 .19 35 41 .34 37 42 .35 42 47 .39 50 57 .48 ADID42572 C PROJECT: Grand Annex DATE: 4/7/2010 TYPE: B 1 CATALOG #: P3MR -E3PIN Page 2 of 2 I LAMP: GE Precise Q50 /MR16 /C/ Spread TBD Unit Number: P3MR -E3PIN so° o�i _Luminance 0° Aining Angle 300 Aiming Angle 30° Aiming Angle `450 Airrdng Angle UL Wlr lenlgWnorna 85° 0 0 - 6' 154 1.3 1.3 6' 82 13 1.7 3.5 2' 171 1.4 0.9 3.5 2' 345 0.8 0.7 2 Lumens: 750 750 0 0 8' 87 1.8 1.8 8' 46 2.3 2.3 4.6 3' 76 2.1 1.4 5.2 3' 153 1.2 1 3 Beam Spread: 150 65° 0 0 10' 56 2.2 2.2 10' 30 2.8 2.8 5.8 4' 43 2.8 1.8 6.9 4' 86 1.6 1.3 4 CBCP: 9,500 550 0 0 12' 6" 36 2.8 2.8 12' 6" 19 3.5 3.5 7.2 5' 27 3.5 2.3 8.7 5' 55 2 1.7 5 45o Test f X21248 0 0 Ten a H21242 19 4.1 Teel a M21247 6.9 4' 25 3.2 rest a H21247 4 CBCP: 1,700 55° 0 Ten a H212" 9 6.6 GE Me MR1K9F125 Degree A 180° A go- 85° 0 0 D FC 6' 73 L 1.8 W 2.4 D FC 6' 38 L 2.6 W 2.3 CB 3.5 D 2' FC 78 L 2.1 W 1.3 CB 3.5 D 2' FC L 148 1.1 W 1 CB 2 Lumens: 884 750 0 0 8' 41 2.4 3.2 8' 22 3.4 3.1 4.6 3' 35 3.2 1.9 5.2 3' 66 1.7 1.5 3- Beam Spread: 250 65o CBCP. 3,000 550 0 0 0 0 10' 26 12' 6' 17 3 3.8 4 5 10' 14 12' 6" 9 4.3 5.4 6 4.9 5.8 7.2 4' 5' 20 13 4.3 5.3 2.5 3.2---i.7 6.9 4 5' 37 2.3 24 2.8 1.9 2.4 4 5 45° D D TM a H21188 1.3 2 Twt a H21197 2.1 2.1 5.8 T- f M21197 1.5 6.9 4' 61 1.2 TM f H21196 CBCP: 12,500 55° GE=MR16/CIM Dares @ 180° @ 90° D FC L W U w L W as u r., L .. ..o u - _ 75° __ 850 0 0 6' 38 3.2 2.5 6' 22 3.1 3 3.5 2' 75 2 1.4 3.5 2' 101 1.6 1.3 2 Lumens: 800 750 0 0 8' 21 4.2 3.4 8' 13 4.1 4 4.6 3' 33 3 2.1 5.2 3' 45 2.4 1.9 3 Beam Spread: 40° 650 0 0 10' 14 5.3 4.2 10' 8 5.2 5.1 5.8 4' 19 4.1 2.8 6.9 4' 25 3.2 2.6 4 CBCP: 1,700 55° 0 0 12'6" 9 6.6 5.3 12'6" 5 6.5 6.3 7.2 5' 12 5.1 3.5 8.7 5' 16 4 3.2 5 45° 0 1997 Ten a H212M 6' 123 0.8 1.2 TM i H212M 1.3 1.3 3.5 TM f H21206 1.1 0.8 3.5 Ten f H21204 2 Lumens: 575 PH6 MRH6pRC/M Degree 85° ! 180° p 90" 0 15719 u r.. 6' 171 L 1 v 1 u 5., 6' 79 1.5 .. 1.5 ..o 3.5 - 2' 159 1.3 .. 0.8 _- 3.5 - ' - - 2' 324 0.7 0.6 -- 2 Lumens: 1030 75° 0 5293 8' 96 1.4 1.4 8' 45 2.1 2 4.6 3' 70 2 1.2 5.2 3' 144 1.1 1 3 Beam Spread: 8° 65° 0 3242 10' 62 1.7 1.7 10' 29 2.6 2.5 5.8 4' 40 2.6 1.6 6.9 4' 81 1.4 1.3 4 CBCP: 16,000 55° 0 2389 12'6" 39 2.3 2.3 12'6' 18 3.2 3.1 7.2 5' 25 3.3 2 8.7 5' 52 1.8 1.6 5 3.9 45° T D D Test l H21224 1.7 5 Tea[ a H21225 4550 D Twt J H21256 D Tm f H21258 Tee[ J X21226 Twt a H21257 Ten a H21226 Tea a H21257 GEQ12MR1416/VNSP9 Degree @ 180° A 901 D FC L W D FC L W CO D FC L W CB D FC L W CB W 850 0 0 6' 123 0.8 1.2 6' 64 1.3 1.3 3.5 2' 121 1.1 0.8 3.5 2' 246 0.6 0.6 2 Lumens: 575 75° 0 0 8' 69 1 1.6 8' 36 1.7 1.7 4.6 3' 54 1.6 1.1 5.2 3' 109 0.9 0.9 3 Beam Spread: 9° 65° 0 0 10' 44 1.3 2 10' 23 2.1 2.1 5.8 4' 30 2.2 1.5 6.9 4' 61 1.2 1.2 4 CBCP: 12,500 55° 0 0 12'6" 28 1.6 2.5 12'6" 15 2.6 2.7 7.2 5' 19 2.7 1.9 8.7 5' 39 1.5 1.5 5 55° 450 0 0 TM a 1421 M7 1.3 12'6" 9 TM t H21208 1.8 7.2 5' Tea a H21208 1.8 1.4 8.7 Tat a H212M 28 1 0.9 wWrrwnrgrywle -5__ 85° " 0 0 6' 151 1.3 1.8 6' 87 1.8 1.6 3.6 2' 147 1.6 0.9 3.5 2' 329 1 0.7 2 Lumens: 900 75° 0 0 8' 85 1.8 2.4 8' 49 2.4 2.2 4.6 3' 65 2.4 1.3 5.2 3' 146 1.4 1 3 Beam Spread: 10° 65° 0 0 10' 54 2.2 3 10' 31 3 2.7 5.8 4' 37 3.1 1.8 6.9 4' 82 1.9 1.3 4 CBCP: 13,100 55° 0 0 12'6' 35 2.8 3.8 72'6" 20 3.8 3.4 7.2 5' 24 3.9 2.2 8.7 5' 53 2.4 1.7 5 4550 D Twt J H21256 D Tm f H21258 Twt a H21257 Tea a H21257 Tar a M21256 GE anMRIOMM Degree A 180° 90° D FC L W D FC L W CB D FC L W CB D FC L W CB 85° 0 0 6' 87 0.7 0.6 6' 38 0.8 0.9 3.5 2' 79 0.7 0.6 3.5 2' 172 0.4 0.4 2 Lumens: 200 750 0 0 8' 49 0.9 0.8 8' 22 1.1 1.2 4.6 3' 35 1.1 0.8 5.2 3' 76 0.6 0.6 3 Beam Spread: 7° 650 0 0 10' 31 1.1 1 10' 14 1.4 1.5 5.8 4' 20 1.5 1.1 6.9 4' 43 0.8 0.7 4 CBCP: 7,400 55° 0 0 12'6' 20 1.4 1.3 12'6" 9 1.7 1.8 7.2 5' 13 1.8 1.4 8.7 5' 28 1 0.9 5 45* Twi IF H21239 D D T. a .21233 TM a H21236 Ter a X21236 Tea a X21239 Notts and Defritions: Lui inane: To convert cdtm2 to foodamberts, multiply by 0.2919 e Beam spread is le 50% center boom candlepower (CBCP.) D =Dista ce to 11cor or wall. FC= Footcardles on floor or well at center beam aiming location. L = Effective Vinyl Beam length in feet (50% of maximum footcardle level.) W = Effective Visual Beam width in feet 150% of m8xinean f00WW dle bvd.) CB= Distance across or down to canter beam location. NGS believes that bare lamp data photometric vastly overstab the perfor- mance of low voltage adi stable accent ruturea. The "rod world photon tries' shown leers are bum off the ~ lamps n fba- ueea wing a der Wns and operated at 12.0 volts. Please sea page 64 8 55 of the IRIS catalog for a further discussion and appropriate correction naidpa- an. H°tc 6pwi ic.t i e W Dirensi°ns wbisat to change neh°u[ notice. Visit our web she M www.cooperIgntig.tae Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801 AD1042572 C909mo Lighting Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 188 905.507.4000 FAX 905.568.7049 11 PROJECT: Grand Annex DATE: 4/7/2010 TYPE: C 1 rl CATALOG #: P3MR- E3AASRPIN J Page 1 of 2 LAMP: GE Precise Q50 /MR16 /C /Spread TBD IRIS CATALOG #: n FSCRIPTION Specification grade 42 watt MR16 adjustable pinhole fixture rated for use in wet locations and in direct contact with insulation. Adjustment mechanism features hot aiming capability, aiming marks and tooless locking. Pinhole minimizes aperture appearance, and reflector provides 50o cutoff to lamp and lamp image. For use with all halogen MR16 lamp varieties. Optical element can be changed after installation to provide a variety of distributions. e.g. into a downlight. SPECIFICATION FEATURES A Reflector .040 thick aluminum spun parabolic interior reflector in Black Alzak' finish. 0... Flange Die -cast flange with matte finish. Die -cast flanges are easily removed for field painting. Elements are keyed for proper insertion. C.- Adjustability Removable lamp adjustment mechanism provides up to 450 tilt and 361 0 rotation and locks into any aiming position. Unit is relamped without unlocking adjustments. Translating centerbeam optics maximize light output. D . Lens Clear tempered glass lens seals for wet location. Soft focus lens standard in platform for smooth beam patterns. Up to two filter media can be used which are retained during relamping. E.- Attachment Positive torsion springs pull flange tight to ceiling. Mechanical light trap eliminates spill light at edge of flange or reflector. V Socket GX5.3 base for Bi -pin MR16 lamps. Back light shield keeps interior of fixture dark. G .•. Transformer Truvolt' toroidal transformer with dual - output taps for proper 12.OV operation. Dimmer tap compensates for inherent voltage loss from dimmers, resulting in 30% more lumens than traditional laminated transformers. Toroidal design, with 90% or greater efficiency, features a rolled one -piece continuous core of M3 grade grain oriented silicon steel complete with an integral thermal to protect against overheating and ensure quiet operation. For dimming, use dimmers rated for electromagnetic transformers. Transformer is warranted for 5 years and is serviceable from below 1 1 3/4' 14MxM TYPE: 1--- 5 1/a' n36rm1 Note: If a dimming system is operated for construction lighting in its "shunt" mode, i.e. bypassing the dimmer modules, for an extended period of time, fixtures with the dual -tap toroidal transformer should be operated on the 'Switched Fixture' output until the dimmers are in use. Operating fixtures on the 'Dimmed Fixture' output with a full 120v input for an extended period will overdrive the lamp and cause shortened lamp life. H .-Frame /Housing Hot dipped galvanized 20 gauge steel frame with built in 112 inch plaster lip. Gunsights allow for consistent alignment. Aluminum .032 thick housing allows for heat dissipation and reduces weight. Matte black housing interior. I ** Box 18 cubic inches, listed for 4 #12 AWG or 6 #14 AWG 900 C additional feed through conductors, has six 112 inch pryouts. J ...Bar Hangers No Flex bar hangers with positive locking, for use with wood, engineered wood and steel frame joists spaced up to 24' O.C. ship with platform. For use in T -bar ceilings order accessory MBCLP. Nailess barb and locator lip provide consistent installation height. K- Codes Thermally protected, IP labeled, for use in direct contact with insulation. Meets Washington State Air tight requirements, 1995 CABO Model Energy Code. L Labels UL and cUL listed, standard wet label, IBEW union made. ORDERING INFORMATION Complete unit consists of a platform and element Optical Platform Element Flange Accessories P3MR E3AASRPIN P3MR = 3" _FiPIN = Blank =White MBCLP 40 Push On T LLSTRAW = Light Straw Airtight IC Rated 6 1 -3/4" 0. [MR POL = Polished Bar Clip 10 Unitsl Lens Low Voltage Adjuable Aluminum PLE3 = Plaster Lip L27K = 2700K dichroic Housing er Pinhole SAL =Satin Extension for Max 2" filter Aluminum Thick Ceiling WAY = Daylight Lens P31VIR REMOTE = LSPD = Spread Lens LSPINK = Surprise Pink 3" Airtight IC LLNR = Linear Spread Lens Rated Housing for Lens LPLAV = Pale Lavender Remote Transformer LUV = UV Reduction Lens Lens LHEX = Hex Cell Louver LLPINK = Light Pink Lens LSNOOT = SNOOT COOPER LIGHTING For additional option, Please consult factory. P3MR E3AASRPIN 42W MR16 3" ADJUSTABLE SHOWER PINHOLE 9- [22229mm1 15 3/4' 7 7/8" lo. 1401mml 1201mm �1254mmI Caning Cutout 4 3/8" 1112mml ADID42547 / PROJECT: Grand Annex (\ DATE: 417 12010 11 CATALOG #: P3MR- E3AASRPIN LAMP: GE Precise Q50 /MR16 /C /Spread TBD TYPE: C Page 2 of 2 Unit Number: P3MR.E3AASRPIN PHOTOMETRICS • V t t tso- i 1 45 30 °1 � 30 °� t LumhL a 00 Aiming Angle 30° Aiming Angie 30° A'srirg Argle 451 Aiming Angle Lam cd /m12 @ Maximum Tilt Horizontal Footcandles Horizontal Footcandles Vertical Footc..dies Vertical Footcandles GE 020 MRIKASP7 wee @ 180° @ 90° D FC L W D FC L W CB D FC L W CB D FC L W CB .7 85° O 0 6' 87 0.7 0 6' 38 0.8 0.9 3.5 2' 79 0.7 0.6 3.5 2' 172 0.4 0.4 2 Beam Spread: 7° 75° 0 0 8' 49 0.9 0.9 8' 22 1.1 1.2 4.6 3' 35 1.1 0.8 5.2 3' 76 0.6 0.6 3 CBCP: 7,400 65° 0 0 10' 31 1.1 1.1 10' 14 1.4 1.5 5.8 4' 20 1.5 1.1 6.9 4' 43 0.8 0.7 4 55° 0 0 12'6" 20 1.4 1.4 12'6" 9 1.7 1.8 7.2 5' 13 1.8 1.4 8.7 5' 28 1 0.9 5 45° 1152 1 382 Tat a H21233 Tat a H21236 Tart a H21236 Test N H21239 Tat f H21230 OS 037 MR16/IR/SP10 Degree @180- @ 90° D FC L W D FC L W C8 D FC L W CB D FC L W CB 85° 0 0 5'0" 236 1.0 1.5 6' 87 1.8 1.6 3.5 2' 147 1.6 0.9 3.5 2' 329 1 0.7 2 Beam Spread: 10° 751 O O 7'6' 105 1.5 2.5 8' 49 2.4 2.2 4.6 3' 65 2.4 1.3 5.2 3' 146 1.4 1 3 CBCP: 13,100 65° 0 0 10'0" 59 2.0 3.0 10' 31 3 2.7 5.8 4' 37 3.1 1.8 6.9 4' 82 1.9 1.3 4 55° 284 284 12'6" 38 2.5 4.0 12'6" 20 3.8 3.4 7.2 5' 24 3.9 2.2 8.7 5' 53 2.4 1.7 5 45° 3225 2304 Tat a H211258 Tat a H21267 Test I H21267 Tat I H21256 Tat I H21250 GE 012 MRIG /CNNSP Degas @ 180° @ 90° D FC L W D FC L W CB D FC L W CB D FC L W CB 85° 1849 1849 6' 123 0.8 1.2 6' 64 1.3 1.3 3.5 2' 121 1.1 0.8 3.5 2' 246 0.6 0.6 2 Beam Spread: 9° 75° 623 623 8' 69 1 1.6 8' 36 1.7 1.7 4.6 3' 54 1.6 1.1 5.2 3' 109 0.9 0.9 3 CBCP: 12,500 651 381 381 10' 44 4.3 2 10' 23 2.1 2.1 5.8 4' 30 2.2 1.5 6.9 4' 61 1.2 1.2 4 55° 281 0 12'6' 28 1.6 2.5 12'6" 15 2.6 2.7 7.2 5' 19 2.7 1.9 8.7 5' 39 1.5 1.5 5 451 3190 2279 Tat Y H211207 Tat I H21268 Tart I H21208 Tat 0 H21209 Tat I H21210 PH G45 Degree @ 180° @ 90° D FC L W D FC L W CB D FC L W CS D FC L W CB MR16y1RC/SPd 85° 0 15719 6' 171 1 1 6' 79 1.5 1.5 3.5 2' 159 1.3 0.8 3.5 2' 324 0.7 0.6 2 75° 0 5293 8' 96 1.4 1.4 8' 45 2.1 2 4.6 3' 70 2 1.2 5.2 3' 144 1.1 1 3 Beam Spread: 8° 65° 0 3242 10' 62 1.7 1.7 10' 29 2.6 2.5 5.8 4' 40 2.6 1.6 6.9 4' 81 1.4 1.3 4 CBCP: 16,00 55° 0 2389 12'6" 39 2.2 2.2 12'6" 18 3.2 3.1 7.2 5' 25 3.3 2 8.7 5' 52 1.8 1.6 5 ¢5° 0 0 Tat a H21224 Tat d H21225 Tat a H21225 Tat a H21226 GE 050 MR16/C/NSPI5 Degree @ 180° @ 90° D FC L W D FC L W CS D FC L W CB D FC L W CB 85° 1869 1869 6' 154 1.3 1.3 6' 82 1.7 1.7 3.5 2' 171 1.4 0.9 3.5 2' 345 0.8 0.7 2 Beam Spread: 15° 75° 65° 629 385 629 385 8' 87 10' 56 1.8 2.2 1.8 2.2 8' 10' 46 30 2.3 2.8 2.3 2.8 4.6 5.8 3' 4' 76 43 2.1 2.8 1.4 1.8 5.2 6.9 3' 4' 153 1.2 86 1.6 1 1.3 3 4 CBCP: 9,500 55° 284 284 12'6" 36 2.8 2.8 12'6" 19 3.5 3.5 7.2 5' 27 3.5 2.3 8.7 5' 55 2 1.7 5 45° Tat a H21244 3916 1152 Tat a H21242 25 3.2 2.6 Tat s H21247 CBCP: 1,700 55° 842 281 Test i H21247 9 6.6 5.3 Tat A H21248 5 6.5 GE 050 MR16 /C/NR25 Degee 9180* 990- D FC L W D FC L W CB D FC L W CS D FC L W CB 851 0 1847 6' 73 1.8 1.8 6' 38 2.6 2.3 3.5 2' 78 2.1 1.3 3.5 2' 148 1.1 1 2 Beam Spread: 25° 75° 65° 0 0 622 381 8' 41 10' 26 2.4 3 2.4 3 8' 10' 22 14 3.4 4.3 3.1 3.9 4.6 5.8 3' 4' 35 20 3.2 4.3 1.9 2.5 5.2 6.9 3' 4' 66 1.7 37 2.3 1.5 1.9 3 4 CBCP: 3,000 55° 281 281 12'6" 17 3.8 3.8 12'6" 9 5.4 4.9 7.2 5' 13 5.3 3.2 8.7 5' 24 2.8 2.4 5 45° 7059 1366 Test s H21188 Tat s H21197 Tai s H21197 Tat a H21196 GE 1150 MR16/C/FLI0 Degree @ 180° @ SO- D FC L W D FC L W CB D FC L W CB D FC L W CS 85° 0 1847 6' 38 3.2 2.5 6' 22 3.1 3 3.5 2' 75 2 1.4 3.5 2' 101 1.6 1.3 2 Beam Spread: 400 75° 622 622 8' 21 4.2 3.4 8' 13 4.1 4 4.6 3' 33 3 2.1 5.2 3' 45 2.4 1.9 3 651 381 381 10' 14 5.3 4.2 10' B 5.2 5.1 5.8 4' 19 4.1 2.8 6.9 4' 25 3.2 2.6 4 CBCP: 1,700 55° 842 281 12'6" 9 6.6 5.3 12'6' 5 6.5 6.3 7.2 5' 12 5.1 3.5 8.7 5' 16 4 3.2 5 45° 14345 1822 Tat a H21206 Tat M H21205 Tat a H21205 Tat a H21204 Not. and Defitid- I.tartirtartce: To convert cdhn2 to foodamberts, mtliply by 0.2919 • Data is based upon bare lamps photomel ics. • Beam spread is to 50% center beam candlepower (CBCP.) D = Distance to floor or wall. FC= Footcandles an floor or wall at center beam aiming location. L = Effective Visual Bean length in fast (50% of maximum ftwtcardht level.) W = Effective Visual Beam width in feet (50% of maximum ftlotcartdle level.) CB= Distance across or down to comer beam lecstiun. NUS bai•ves that bars tang data phatomstrim vastly overatars th- parfoo attoa of low vltaga adjust ec-K flaaaaa. TM "r.I wtxld platomst ics' d- hero w from elf the shall lamps in flaw ws urns a dear lam and eparllted at 12-0 vaha. blew sae pogo 64 a 65 of th. Bi5 catalog for a forumor duasron and M -pliaar eomataimt w addpiara. " Lighting Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 AD1042547 PROJECT: Grand Annex F DATE: 4/7/2010 TYPE: C2 CATALOG #: 2139 - *" Page 1 of 1 LAMP: 10W T3 G4, 12V Recessed wall luminaires with unshielded light Housing: Constructed of die -cast aluminum with integral Type: wiring compartment. BEGA Product: Enclosure: One piece die -cast aluminum faceplate; 3 /a' thick, Project: clear tempered glass, machined flush with faceplate surface with internal translucent white ceramic coating. Faceplate is secured Voltage: by two (2) flush socket head stainless steel captive screws Color: threaded into stainless steel inserts in the housing casting. High Options: temperature, one piece molded U-channel gasket for weather tight operation. Modified: Electrical: Low voltage; G4 (10 W) lampholder, requires a remote 12 V power source. Lamp supplied. Maximum of four (4) No. 12 AWG conductors (plus ground) suitable for 90 °C. Two Vs* knockouts provided for '/i conduit. Finish: Available in five standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV); EurocoatTM (URO). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order. U.L. listed, suitable for wet locations and for installation within 3 feet of ground. Suitable for all types of construction including poured concrete. Protection class: IP 65. A B — LWV Wnan A B 2139 U0 1 10W T3G4,12V 140 3' /a 4 BEGA -US 1000 BEGA Way, Carpinteria, CA 93013 (805) 684 -0533 FAX(805)566-9474 www.bega-us.com ©copyright BEGA -US 2008 Updated 2/08 t 1I yt it PROJECT: Grand Annex DATE: 4/7/2010 TYPE: D CATALOG #: 523 - 000027 -" ", with all required components. Page 1 of 3 LAMP: 2700 °K LED IN w eW Profile Powercore Under - cabinet white light LED fixture with an ultra -low profile eW" Profile Powercore is a superior under - cabinet LED fixture for common cask lighting and display case applications. eW Profile Powercore is perfect for new installations and retrofit upgrades that require high - quality illumination with dramatic energy savings.With an ultra -low profile housing, three fixture lengths, versatile jumper options, and housing colors to match most environments, eW Profile Powercore offers unprecedented flexibility and ease of installation. • Warm and cool color temperatures —Warm 2700 K fixtures replicate warm incandescent light sources, and cool 4000 K fixtures offer clean, neutral, and efficient lighting. • Dimming capability — Compatible with many ELV -type dimmers, occupancy sensors, and ambient light sensors. • Direct to line voltage — Connect eW Profile Powercore fixtures directly to line power input without the need for remote transformers. • Versatile installation options — Ultra -low profile housing for discreet under - cabinet placement. 9.25 in, 19.25 in, and 39.25 in fixture lengths. Multiple jumper cable and connector options for nearly any layout. • Rated for damp environments — Allows for installation under cabinets, covered porches, work benches, labs, and other damp locations. • Energy efficiency — 40% energy savings over the fluorescent alternative, and 90% energy savings over the incandescent alternative. California Tide 24 Compliant. LED lighting for everyday applications Familiar form factors and power requirements for easy installation Uses 901/ less energy than typical under- cabinet lighting � A A Green flagship \` /Jl Product Our Green Flagship products offer significantly improved environmental performance in two or more of the following Green Focal Areas: weight, energy consumption, hazardous substances, packaging, recycling, disposal, and lifetime reliability. PHILIPS COLOR KINETICS 1 PROJECT: Grand Annex DATE: 4 /7/2010 TYPE: D p' I CATALOG #: 523 - 000027 -"", with all required components. Page 2 of s LAMP: 2700 °K LED Product Selection To order eW Profile Powercore, choose options from these three categories. Line connection © Fixture re © options length options connection options North America Installations Switched 1-4- code mss: Wiring canparonent Owslee North Anteriea Insr 8ations Leader able 925 a (235 mm) eW Prolk Pb— fixture 1915 in (489 mm) eW Pmfik Powercore fixwre Jumper ode 39.25 in (997 mm) ew Profile Powercore fixwre Mounting tack Contact Your Showroom For prlcfng and —lability. Product Specifications Due to continuous improvements and innovations, specifications may change without notice hem t End -m -.M 6 in (I S2 mm) connector ?-Pry tA 4305�nxn) T"' 5 l2 in 18 in mm) Jumper able Jumper ode ISO 264 524 S ft(15 m) BRO-00001 1 -00 R01 06-09 Jumper able Jumper ode 39.25 in (997 mm) ew Profile Powercore fixwre Mounting tack Contact Your Showroom For prlcfng and —lability. Product Specifications Due to continuous improvements and innovations, specifications may change without notice hem Specification 9.25 in 19.25 in 3915 in Burlington, Massachusetts 01803 USA ;Color Cove, 1ntAiV,+de, iW, ;Mayer, Light Without Limns, Optbird and Powercore are either Beam Angle 110° x 110° Tel 617.423.9999 states and /or other countries M other brand or product names are trademarks or registered 2700 K ISO 264 524 t La,men measurement with IES 771. BRO-00001 1 -00 R01 06-09 Lumenst 4000 K 180 310 648 complies esung procedures Color Temperature 2700 K ( +475 / -200) 4000 K ( +600 / -300) Efficacy 2700 K 25.0 26.4 26.2 Output Qm / W) 4000 K 30.0 31.0 32.4 Mixing Distance 2 in (51 mm) to uniform light 2700 K 71 72 73 CRI 4000 K 80 80 82 Lumen Maintenance$ 55,000 hours L70 @ 25° C 31,ODO hours L70 @ SO' C t L70 = 70% maintenance of I.— output (When light Input Voltage 100 1120 / 220 - 240 VAC, 50 / 60 Hz output drops below 70% of initial anpuc) 5.5 W max. at full output, 10 W max. at full output, 20 W max. at full output. Electrical Power Consumption steady state steady state steady state SW peak in -rush 13 W peak m -rush 25 W peak in -rush Power factor z 95 Dimension .88 x 9.25 x 1.7 in .88 x 19.25 x 1.7 in .88 x 39.25 x 1.7 in (Height x Length x Depth) (22 x 235 x 43 mm) (22 x 489 x 43 mm) (22 x 997 x 43 mm) Weight 7 oz (198 g) 13 oz (369 g) 1.6 lbs (728 g) Housing Extruded aluminium, polycarbonate White, Black or Gray powder - coated finish Physical Lens Clear polycarbomte Fixture Connections Integral male / female connectors Operating Temperature 4- - 122° F ( -20 -- SO- C) Humidity 0 - 95 %, non- condensing Fixture Run Length Up to SO It (15.3 m) of fxmres in a single run, <- 324 W Certification UL / cUL, FCC Class B, CE r� FC CC Certification LED Class Class 1 M LED product and Safety Environment Dry / Damp Location, IPSO Energy Efficiency Cahfornia Tide 24 Compliant Philips Color Kinetics C- yrignt © 2009 Philips Solid -State Lighting Solutions, Inc. M rights re served PHILIPS 3 Burlington Woods Drive Cif anacore, Ch—, CK the CK logo, Color Kinetics, the Color Kinetics Logo, CdorBlasL ColorBl— Cokx &xA Colo,<— CdorPlay. Cok rReach. DMand. EssemidWhite, eW, ;Colo! Burlington, Massachusetts 01803 USA ;Color Cove, 1ntAiV,+de, iW, ;Mayer, Light Without Limns, Optbird and Powercore are either Tel 888.385.5742 registered trademarks or tads narfts f Phelps Sold -S— Lighting Sduti«rs, mt. in the unwed Tel 617.423.9999 states and /or other countries M other brand or product names are trademarks or registered trademarks of their respetiw owno . Due to —bruous improvements and innovavons, Fax 617.423.9998 specifications may change without roster www.color kinetics.com /showroom BRO-00001 1 -00 R01 06-09 PROJECT: Grand Annex DATE: 4/7 /2010 TYPE: D CATALOG #: 523-000027-**, with all required components. Page 3 of 3 LAMP: 2700 °K LED • Refer to Specification Sheets for Black and Gray housing color Item Number / Philips 12NC eW Profile Powercore Product Guide 5 Fixtures and Accessories Use Item Number when ordering in North America. Item br*g Tmp. Size Item Number Philips 12NC Included in the box 9.25 in (235 mm 523 - 000026 -18 910503700407 eW Profile Powercore eW Profile Powercore, 100VAC White 19.25 in 489 mm 2700 K ( ) 523- 000026 -19 910503700408 Mounting Clips 39.25 in (997 mm) 523 - 000026.20 910503700409 End -to-End Connector 9.25 in (235 mm) 523- 000026 -21 910503700410 eW Profile Powercore, 100 VAC White 4000 K 19.25 in (489 mm) 523 - 000026 -22 910503700411 39.25 in (997 mm) 523- 000026 -23 910503700412 9.25 in (235 mm) 523- 000027 -18 910503700425 eW Profile Powercore, White 2700 K 19.25 in (489 mm) 523- 000027 -19 910503700426 eW Profile Powercore fixtures 120 VAC 39.25 in (997 mm 523 - 000027 -20 910503700427 Fixare kngd, 925 in, effective kogth 11 ie _ yg, J/ ��� 9.25 in (235 mm) 523- 000027 -21 910503700428 Fixture length 19 25 , effecvve length 21 in eW Profile Powercore, White 4000 K 19.25 in (489 mm) 523 - 000027 -22 910503700429 Fixture length 39.25 ln, effecvw length 41 in 120 VAC 39.25 in (997 mm) 523 - 000027 -23 910503700430 Ef- -kng[h, -W. mbk connecmrs eW Profile Powercore, 9.25 in (235 mm) 523- 000028 -18 910503700443 one r moors 220 - 240 VAC White 2700 K 19.25 in (489 mm) 523 - 000028 -19 910503700444 including End -t End Connector 39.25 in (997 mm) 523400028 -20 910503700445 eW Profile Powercore, 9.25 in (235 mm) 523 - 000028.21 910503700446 220 - 240 VAC White 4000 K 19.25 in (489 mm) 523- 000028 -22 910503700447 including End -to-End Connector 39.25 in (997 mm) 523- 000028 -23 910503700448 Included In the box �(} w eW Profile P--.m, 9.25 in (235 mm) 523- 000028 -36 910503700528 Profile Powercore d� 'O� 220 - 240 VAC White 2700 K 19.25 in (489 mm) 523 - 000028 -37 910503700529 eW including Leader Cable Mounting Gips �'y ,.a and Terminator 39.25 in (997 mm) 523- 000028 -38 910503700530 Leader Cable eW Profile Powercore, 9.25 in (235 mm) 523- 000028 -39 910503700531 Terminator 220 - White 4000 K 19.25 in (489 mm) 523 - 000028 -40 910503700532 in Leader Cable d Terminator and Terminator 39.25 in (997 mm) 523 - 000028 -41 910503700533 25 @ 9 in (229 mm) 120 - 00006402 910503700273 Optional Mounting Track Mounting Track White 25 @ 19 in (483 mm) 120 - 000064 --00 910503700271 ensures straight runs of fixtures. 24 @ 39 In (991 mm) 120 - 000064-01 910503700272 6 in (152 mm) 108 - 000035 -05 910503700265 Jumper Cable, 12 in (305 mm) 108 - 000035-06 910503700266 100 / 220 -240 VAC White 18 in (457 mm) 108- 000035 -07 910503700267 Jumper Cables add extra space 5 It (1.5 108-000035 -08 910503700268 between fixtures in a series. 6 in (152 mm) 108 - 000035 -00 910503700260 Jumper Cable, 12 in (305 mm) 108 - 000035 -01 910503700261 120 VAC White 18 in (457 mm) 108 - 000035 -02 910503700262 5 it (1.5 m) 10&000035 -03 910503700263 End -to -End Connectors connect /y End-to -End Connector, White .875 in (22 mm) 10&000035 -10 910503700368 fixtures in a solid linear run. L _ Quantity 5 "Y" Jumper Cable .'Y" Jumper Cables split a �h,x_ and Terminator. White 16.5 in (419 mm) 108 - 000035 -09 910503700269 single run of fixtures into two 100 1220 - 240 VAC separate runs. L ^Y" Jumper Cable and White 16.5 in (419 mm) 10 &000035 -04 910503700264 T 120 VAC erminator, Use Portable Leader Cables Switched Portable create portable installations at 6 =� Leader Cable and White 10 It (3 m) 10 &000034-00 910503700258 that plug into 120 VAC outlets. t > Terminator, 120 VAC -- �~ Leader Cable and For installations outside of Termfnator, White 10 ft 3 m ( ) 10&000034-01 910503700259 North America. '._ " 100 1220 - 240 VAC I ' Permanent Wiring 1.125 x 1.75 x 3.5 in For permanent installations in I '� � A' Compartment and White (29 x 45 x 89 mm) 120 - 000065 -00 910503700270 North America. -- Terminator 120 VAC (Heigk xWxhh x Depth) • Refer to Specification Sheets for Black and Gray housing color Item Number / Philips 12NC eW Profile Powercore Product Guide 5 PROJECT: Grand Annex DATE: 417/2010 TYPE: F1 1 CATALOG #: 9711- D1 -ST- 8118- S -1 -1 -E w /Hanger Kit Page 1 of 2 J LAMP: (1)TT5 18W Vectra Micro recessed h4.o,- -... 1'x1' 1 Tr5 (18VM. __...... _.- _..... _ ........._..--- __. - - -... .. ,weso0pda° `/ LEnjun Project Name - Spec Type Notes Order Guide Some combnahons of product options may not be aoailable Cl WM for assistance with year specdaabm LVIIJ F D1 ST 8118 — Product Series & Si, e Version Configuration '.. Lamping Housing Vectra Micro l'xl' D7 Standard? -Grid or Drywall Sr Siandakate 1Tr5(1OW) S StandaN(22ga1 2611 N New yak i2llga.) See all an reerl Upgrades & Accessories Please irlr&aN.4h check mark ❑ tarps kn"" El Kvwvjt See details on reuses C Chicago Plan. — Wining i — Volta3e 1 1 oct 1 120V 5 1 cc[ w/ Battery Pack 2 277V 3 347V• •rate: sage W may M be available o wo, Ca It wertile la wmfdete let or Consult f"ary, Stald3tl x,rkg am—for detai6. E Standard Ballast Well I Ledane a, ballast mania— a0ml- ..:Ilion 11- 13/16• - -.� f s -lies• i< 12 -1/2• - -—� Side View 12 -7/16' — — — 12 -7116° �'� _ - I— 14Y78' — 12 -1/2•J r 02008 te1alite Ph— :604.888.6811 11100.665.5332 web: ww kdalft Fina, kdowliwilar— -� - — Fit- 9711- 0118ydr Rev a pump, sap b—d PHILIPS `,' '. PROJECT: Grand Annex DATE: 4/7/2010 TYPE: F1 LAMP: (1)TT5 18W Vectra Micro Additional Information Optional Hanger Kit Alleriate Mounting Methods 1 T T5 (1 BM K4 Includes Photometry at- Report Summary N redrachm baW & T-bar anchor clips mdomy 66.3% MI RP-1 -D4 recommendations for VOT-kansim, spaces Mwnled to Joists Mowdad to T-Bar Grid Channel Candela Distribution M V7 11 71, 115 116 113 1. 102 11 ed Is 67 a V 31 o 0 0 o o Specifications Die 10 o"Kni pro&Kt UnprGivements, Lecialle reserver; the rot to change specificabons without notice Ballast hawai De-formed,post-pan"B" 22 puge cold noted steel ftw York City Eleclromc Supplied with pre-ersthillea ballast disconnects as per WeIW W" Goefficients of Ulffizalion Avg. Luminance (cd/m� Mnnurn 7 1 In MufiW wire entrances am awniable ffop or side) to allow easy wring Optical assembly consists of Rd acrylic parees, and flat acryd leds A Approvals am; n A, d, 7 7 n n 251", M4 protected Miso0fiti film Over cadides o0mal light distribution and United to LIL & C&A Standams n no M 71 W for 58 a 1M IM 21. high efficiency The CoMMI tram 6 constructed ftom die formed spot "i of GhW Approved CCEA fibousing option C) 2 as Q 1W 1� welded, 22 gauge coid-rolked SW assembled together with oaruodd Designed In comi with NYC code requirements (Housing Option M aluminum profiles in a sherry tram The tram allows kriol-frie acc� 4. tolhensOeofthekftebymyofexp�.,�Wngs Mandmance, Finish is, Housing and freve we post-fraffiled, high cinality pomler coal ao can be performed from below the ceiling ITS files for this add offer 2, N Q W photometric options can bi, FDdure is compatible with incia coneracri T ba ceding and don 9 31 27 24 U W 25 V V N M n R 21 W downloaded onlinde at accessible cedings Butli mDka brackets, lartlached to housing) IMPORTANT Fatirod, m rated for dmi installations only. ftw�do.2 www; ledalfle are designed to wor, with optional hanger lorl, or with FWT oondird of 00 not Install insulationi within 3" (76 moo of my part of the detal channel isopplied by offers) Brackets allow post installation kinoriame adpastreat of fii hi Optional hanger kt minces barter ran, T bar anchor clips and redirect- bus to enable mounting 90� frorri PROJECT: Grand Annex DATE: 4/7/2010 TYPE: K 1 CATALOG #: CRK- `- W- C- " -" -S- -0000, w /HPLAA- 284 -0 -00 Page 1 of 2 J LAMP: 2800 °K LED ANrldee CLIKSTRIPTm LED Elements HPLA Series TYPE: u:;;d SIDE VIEW 0.66 E16.893- ---�1 —� 1.00 [25.403 �- TOP VIEW END VIEW SPECIFICATIONS: HPL Features: • High Power Nichia 1 waft white LED • Designed for Clikstrip low voltage lighting system with 1 -7/8' standard spacing or 3-3/4' aftemate spacing. Clikstrip ordered separately. • Snap -fit into festoon style lamp clips. Clip allows 180° rotation. • LED position accepts optional focusing lenses for display and accent lighting (factory installed). • 120° viewing angle • Color Temperature: 2800K, 3500K, 5000K • 80 typical CRI ( 92 CRI, consult factory for availability ) • No UV orIR • No Mercury, Lead free • Operating Temperature: 22 °F to 122 °F ( -30 °C to 50 °C) • Compatible with standard low voltage magnetic wall box dimmer. • 70% lumen maintenance at 50,000 hours based on LED manufacturers test Color Temperature 2800K 3500K 5000K Input Voltage 24VAC 24VAC 24VAC Total Output (Lumens) 36 35 48 Lumens per foot 216 210 286 Efficacy "Vilfatt) 50.7 52.2 67.6 Input current (mA) 30 28 30 Watts per foot 4.26 4.02 4.26 . Note : System efficacy based on 92% efficient toroidal transformer power supply ( Ardee 800 series and Ardee °T' series). Ordered separately Compliances: • UL and cUL Listed damp location for use with Clikstrip low voltage lighting system, suitable for Class 1 wiring applications. Ordering Information Ardee's product specification formula allows you to specify each LED Element feature. To specify a complete catalog number, choose one item from the selection available in each module. Example: HPL.1A- 354 -1 -50 Series LED Positions LED Edition Color Temperature Vohane I Pnws ontkrn I Pnc R—m Annb HPL 1- High 1 -1 position module A -'A' type LED -28 - warm white, 2800K 4 - 24 Volt AC/DC 0 - no focusing lenses 00 - no focusing lens Performance LED -35 - neutral white, 3500K 1 - focusing lens 12 -12° -50 -cool white, 5000K 50 - 50° -XX - other LED colors' Vn YIM11, dnu M do Wtll/ cunsult IdGluiy n7r dvdnduuny. 4"'E"D `L. to ?m ?2amm SIDE NEW WRH LB6 0 F7" pRT' �7cmm 206 mm O Standard Profile Clip High Profile Festoon Clip i ADVANTAGE (fixed position) (180° rotation) TOPVIEW WIM 222352 09/15/08 Ardee Lighting . 639 Washburn Switch Rd . Shelby . NC . 28150 . tel: 888442- 7333 / 704A82 -2811 . fax:800- 275 -1544 / 704-4840818 . www.ardeelighbng.com Ardee Lighting is a Philips group brand PHILIPS PROJECT: Grand Annex DATE: 4/7/2010 TYPE: K CATALOG #: CRK- '`- W- C- "' - " -S- -0000, w /HPL.1A- 284 -0 -00 Page 2 of 2 LAMP: 2800 °K LED I* rdee CLIKSTRIPT"" LED Elements HPL.1 Series TYPE' Clikstrip Ordering Information To specify a complete Clikstrip catalog number, choose one item from the selection available in each module Example: CLKCWC08S -0000 -- 0000 Series Moununq Color Clip Type Nominal Lenqth Feet Center- to-Gemer spacing Lamp Tvpe CLK - for class 1 wiring - Jbox T - tape W - white C - standard Standard sizes in 1' F- Feet S - HPL.1 standard - 0000 - no lamp. with V knockout profile increments from 01' M- Meter spacing 1 -7/8' o.c. HPL ordered 68 68 68 F -fiat B -black -chrome to 16' or half meter 103 103 103 12" separately CRK -for class I wiring - Jbox mounting clip 210 210 210 6" increments from 0.5 85 140 85 A - HPL.1 alternate 280 280 280 with romex fitting (one per foot) 112 220 112 Ff�2� G - standard to 4.5 meter F—LE-0 spacing 3-3/4' o.c. profile CXK -for class II wiring A - angled gold C- HPL.1 custom spacing mounting clip (O.C. dimensions to CLX -for use with enclosed (one per foot) A - high profile be called out in extrusions -chrome product description). CUK - pre -wired for case lighting Horizontal Footcandle Measurements (cool white without focusing lenses) HPL.1 Standard Spacing "S" Distance HPLA Alternate Spacing "A" Inches 43 43 43 24" 27 21 27 21 27 68 68 68 18" 39 32 39 32 39 103 103 103 12" 68 51 68 51 68 210 210 210 6" 140 85 140 85 140 280 280 280 4" 0" 220 112 220 112 Ff�2� 220 FLED] F—LE-0 LED I LED I LED (6) Clikstrip HPL.1 -1 -718" o.c. (Standard) (6) Clikstrip HPL. - 3-314" o.c. (alternate) A"'..� Ardee Lighting . 639 Washburn Switch Rd . Shelby . NC . 28150 . tel: 888442 -7333 / 704- 482 -2811 . fax:800- 275 - 15441704- 484-0818 . www.ardeelighting.com Ardee Lighting is a Philips group brand PHILIPS PROJECT: Grand Annex DATE: 4/712010 TYPE: K1 1 CATALOG #: AL- HB4 "'- WASP -25 Page 1 of 2 I LAMP: 2800 °K 25° LED WLED LIGHT BARS ENJOY SUBSTANTIAL ENERGY, MATERIAL AND LABOR SAVINGS For architectural lighting designers, LED High Power light bars are the clear choice. Manufactured to the highest standards, easy to install and blend according to the desired effect, LEDs remain cool in all applications. Choose from four different LED configurations and eight adjusted colors including White, Red, Green, Blue, Amber, Mixed Amber, Pink and RGB. PROJECT: Grand Annex DATE: 4 /7/2010 TYPE: K1 I' I CATALOG #: AL -H64 "- WASP -25 Page 2 of 2 LAMP: 2800 °K 25° LED -- -- — ■ARC HITECTURAL' ILLUMINATION SYSTEMS 120' 5' 5' 5' 17f; i - - -- 3' 3' 3' 4010 1' 1' i' 168fc 2" i 15° 25° 120° ! L- 1.625' ORDERING INFORMATION LIGHT BAR I-RICAL SPECIFICATION:; PART DESIGN TYPICAL TYPICAL MAX (LOAD) MAX (LOAD) NUMBER VOLTAGE CURRENT WATTS AMPS WATTS A L -H B419 -XX -120 12 PER BAR PER BAR PER RUN PER RUN AL- HB410•XX -120 VDC 0.27A 0.54A 6.51111 13W 5 Amps . , 120W AL- H8419•XX -120 AL- HB42 &XX -120 0.67A 1.08A 1.35A 16W 26W 32W AL- HB437 -XX -120 AL- HB446.XX -120 LIGHT BAR PART LED LIGHT BAR ALUMINUM NUMBER LEDs LENGTH EXTRUSION AL- HB410 -XX -120 6 10.00" 2.00" High A L -H B419 -XX -120 12 19.00" AL- HBXXX- WASP -120 Super Warm White - - AL- HB428-XX -120 18 28.00" 1.625" Wide AL- H8437 -XX -120 24 37.00" AL- HB44 &XX -120 30 46.00° LED SPECIFICATIONS PART LED TYPICAL VIEW TYPICAL NUMBER COLOR KELVIN ANGLE LUMENS PER 46" AL- HBXXX- WASP -120 Super Warm White 2800% 1201 1,950 Im AL- HBXXX- WARP -120 Warm White 3500°K 120° 2,0401m AL- HBXXX -WNEP -120 Neutral White 4100°K 120° 2,1001m AL- HBXXX -WCOP -120 Cool White I 5000°K 1 120° 2,2501m • technology by LEDPower • For installation and mounting options, go to www. ledpower. com /Productslmountingbrackets.htmi 17 10 PROJECT: Grand Annex �. 1\ DATE: 4/712010 TYPE: LT CATALOG #: 8894 / WH / W Page 1 of 1 LAMP: 1.2W x 18SSC P4 LEDs, 90° Beam Angle CATALOG NUMBER: 8894 TYPE: PROJECT: PrWN4A �e��U"� I L i 9 h t i n 9 8074 LED Ceiling Recess Square Trim • 1.2W x 18 SSC P4 LEDs 90- Beam Angle • 7.87' x 7.87' square trim •Ceiling opening: 720' x 7.20' • Class 11 wiring, 2 x J-Box and 2 x 18W 350mA constant current LED drivers included SSC Pa i-ED 1.2Wc18 90 H(m) E(La) a(m) 1m a'" 0.20 2m 64a 3m "0 4m Will, ' 6.00' I aim 5 75 1.4V ❑ 07 /5 45 -]0 398 ca -15 0 16 a0 ' ± 3% Kelvin temperature variation All fixtures and lighting systems must be used with Prima transformer, driver, and /or ballast; or all warranties are void ITEM # D DESCRIPTION H 6.00- ❑:.a j 889 8 8' square trim LED recess downlight ❑ ❑SV - Silver ❑ ❑ 435' I o 1 ' 6.00' I aim 1.4V ❑ 07 'LED Cola Temperature • Cool White (C) 5800K • Natural White (N) 4000K Warm White (W) 2800K ' ± 3% Kelvin temperature variation All fixtures and lighting systems must be used with Prima transformer, driver, and /or ballast; or all warranties are void ITEM # D DESCRIPTION H HARDWARE • • COLOR j 889 8 8' square trim LED recess downlight ❑ ❑SV - Silver ❑ ❑C - Cool White ❑ ❑ 1.2W x 18 SSC P4 LEDs, 90 °Beam Angle ................... _ .... ................ .._..... ......... ......... _.._..._...... .......... ...... _.._. ......__._ ........ _.__.___... PRIMA LIGHTING CORP. 13615 Marquardt Ave. Santa Fe Springz,CA90670 .......... ,, p :562 -(17- 3079._._ . TOLL FREE 866.885.4915 .,,,__.._... .f: 562- 407 - 3069...... „ww..prlmalig hting.co m ..................... 02009 Prima Ll�htrrlM Corpt............................. _...._...,..._.,,._.,,,,,,,,,,, All rk�hts Rezerved Spedfiwtions.are ztlb)eLt to change without no tke._,__.,__.. REV071509 / PROJECT: Grand Annex DATE: 4/7/2010 TYPE: M CATALOG #: 220470mc, w /156000mc Page 1 of 2 LAMP: GE Precise QMR16 /C / * *, SPREAD TBD I BUCK l �y �?I 4 H 1 5/8" Job Name: r-txture i ype: SILENA SPOT Part Number. Description: The Silena Spot is a clean and simple cost effective fixture that does not compromise the quality associated with Bruck products. Fixture head tilts 135 °. The Silena Spot is equipped with a safety feature where by the lamp is retained by a stainless steel spring hidden by the mount allowing re- lamping without the use of tools. Uni -plug design allows fixture to be mounted on any lighting system or ceiling canopy through the use of an appropriate adaptor, not included. Part Numbers: 220470bz bronze 220470ch chrome 2204708 gold 220470mc matte chrome Technical Specs: 12V AC /DC input 50VA, 50W for 1 (maximum 50 watt lamp) GU5.3 socket (for MR16) Suitable for dry locations only Dimmable Bruck Lighting System, Inc. 15774 Gateway Circle Tustin, CA 92780 p:714.259.9959 1714.259.9969 12 Nov 2009 PROJECT: Grand Annex DATE: 41712010 TYPE: M CATALOG #: 220470mc, w /156000mc Page 2 of 2 LAMP: GE Precise QMR16 /C / * *, SPREAD TBD I BUCK FOV r'_ Job Name: Contact: Fixture Type: Part Number. FLUSH MOUNTED CANOPY Description: The Flush Mounted Canopy comes with a Uni -Plug for use with Uni -Light fixtures, transformer not included. Not designed to fit over standard J -box. Part Numbers: 156000bz bronze 156000ch chrome 156000mc matte chrome 156000wh white Technical Specs: 75VA maximum 12V AC /DC input Class II wiring only Bruck Lghting System, Inc. 15774 Gateway Circle Tustin, CA 92780 p:714.259.9959 1.•714.259.9969 16 Nov 2009 i PROJECT: Grand Annex t' DATE: 4/7/2010 TYPE: R CATALOG #: LTR300WP- SO -WW, w /LTH ** -DIM Page 1 of 1 LAMP: 3500 °K Warm White LED GMLighting Project: LEDTASKTM Type: WET LOCATION FLEXIBLE LED Location: LINEAR RIBBON Contact Phone: 5m / 164' PRODUCT DESCRIPTION ( I p1m /3.i'' A wet location flexible LED linear ribbon that conforms to .3 m o r ® ® ®r ® ® ® ®r ® ® °o straight, curved and irregular architectural coves, outdoor steps and bannisters, fountain exteriors, outdoor cooking islands ( 12.4mm Rod and food stations, recesses, and other constructs where even, - 5 energy saving LED illumination is specified in environments that are exposed to moisture. Not to be submerged directly in ,— water. Available in a 5 meter (16.4') reel and 1 meter (3'.37') length. LEDTask can be cut and sealed in the field to achieve desired length. PRODUCT SPECIFICATIONS Construction: LEDTask Wet Location Flexible Linear Ribbon is a flexible LED ribbon, fully surrounded in a waterproof linear sheath that protects the inner LED ribbon from moisture. Shipped in moisture proof bags. One meter length has a female connector affixed to the opposite end of the ribbon which allows for connecting 2 lengths ELECTRONIC POWER SUPPLIES together and is supplied with t male plug for sealing the end of DIMMABLE MAGNETIC POWER SUPPLIES the run. Includes 1 - LTW -WP -24 wet location ribbon to power Cat. No. Description supply connector. Also contains mounting clips, silicone sealant LTP -2 2 Amp - Switchable - 120V Cord and Plug. and 2 silicone end caps. 12VDC @ 2 amps. Electronic. Five meter reel includes 1 - LTW -WP -24 24" wet location ribbon to power supply connector. 1 - male connector affixed at start LTP -6 6 Amp - Switchable - 120V Cord and Plug. of reel. Mounting clips, screws, silicone sealant and 2 - silicone 12VDC @ 6 amps. Electronic. end caps. LTH -8 8.5 Amp - 10OW Metal Chassis Hardwire Electrical: 19 LED's per foot. Each LED is .08W. 1.52W Screw terminals and mounting feet. Electronic. per foot. One meter length is .4 amps. 5 meter reel is 2 amps. LTH -16 16.7 Amp - 20OW Metal Chassis Hardwire 50,000 hour life. Screw terminals and mounting feet. Electronic. Color Temperature: 3500K warm white (WW) and 5500K pure white (PW). LTH -25 25 Amp - 320W Metal Chassis Hardwire Power Supplies: See chart at right for complete descriptions Screw terminals and mounting feet. Electronic. and catalog numbers. LTH -40 40 Amp - 50OW Metal Chassis Hardwire Dimming: Yes with dimmable power supplies (see at right) Screw terminals and mounting feet. Electronic. utilizing low voltage magnetic on /off wall dimmer (by others). LTH -50 -DIM Dimmable - Primary: 120VAC, 60Hz, 0.33A Mounting: Linear ribbon can be mounted to any surface Secondary: 12VAC, 12VDC, 3.33A Max. 50W utilizing silicone mounting clips (supplied). LTH -60 -DIM Dimmable - Primary: 120VAC, 60Hz, 0.33A UFo, LTH- so -DiM Secondary: 12VAC, 12VDC, 3.33A Max. 60W @ ■ lTH -fiO -DIM and L rH -1._ 'M LTH- 100•DIM Dimmable - Input: 120VAC, 60Hz, C U$ cC us Output: 12VDC Max. 100W, Nema 3R Enclosure Cat. Number Length Total LED's LED Wattage Total Amps Color Temp. LED Life LTR30OWP -SO -PW 5M / 16.4' 300 (19 /ft.) 0.8W (1.52W /ft.) 2.0 5500K 50,000 hrs. LTR60WP -SO -PW 1M / 3.37' 63 (19 /ft.) 0.8W (1.52W/ft.) .4 5500K 50,000 hrs. LTR30OWP -SO -WW 5M / 16.4' 300 (19/ft.) 0.8W (1.52W/ft.) 2.0 3500K 50,000 hrs. LTR60WP -SO -WW 1M / 3.37' 63 (19 /ft.) 0.8W (1.52W/ft.) .4 3500K 50,000 hrs. GMUghtingiTelephone: www 70 net (708) 671 -0811 Toll -Free: (866) 671 -0811 FAX: (708) 448 -8545 e -mail: sales@gm[ighting.net • Specifications subject to change without notice. 061109_ledtaskwet 11 PROJECT: Grand Annex DATE: 4/7/2010 TYPE: T1 1 CATALOG #: 17001 *mcgy, With all required components. Page I of J LAMP: Refer to fixture type'TA option' BUCK Job Name: Fixture Type: BOA TRACK Contact: Part Number: Description: The Boa Track is a dual circuit low- voltage aluminum track with maximum load of 60OW (2 x 30OW circuits). Internal connectors for Boa Track are available to make smooth, continuous runs possible. Angled connectors can also be used to create different run configurations. Factory curved track is available. Part Numbers: 170010mcgy matte chrome, 76" 170011mcgy matte chrome, 38" Technical Specs: Bruck Lighting System, Inc. 15774 Gateway Circle Tustin, CA 92780 p: 714.259.9959 /'714.259.9969 16 Nov 2009 PROJECT: Grand Annex DATE., 4/712010 ;l TYPE: T1 CATALOG #: 17001 *mcgy, With all required components. Page 2 of 4 LAMP: Refer to fixture type 'TA option' BUCK Job Name: Contact: Fixture Type: Part Number: BOA TRACK CONNECTOR Description: The Boa Track Connector is a four piece plug -in conductive connector. Creating a continuously smooth connection, for use with the Boa track system. Part Numbers: 170403mc matte chrome and black Technical Specs: Bruck Lighting System, Inc. 15774 Gateway Circe Tustin, CA 92780 p:714.259.9959 1714.259.9969 16 Nov 2009 PROJECT: Grand Annex I' I DATE: 4 /7/2010 TYPE: T1 CATALOG #: 17001'mcgy, With all required components. Page 3 of 4 LAMP: Refer to fixture type'TA option' BUCK Nl 1 1/8" contact: Fixture Type: Part Number. BOA END CAP Description: The Boa End Cap for the Boa track segments. Part Numbers: 170020mc plastic matte chrome Technical Specs: Bruck UgMkg System, Inc. 15774 Gateway Ckde Tustin, CA 92780 p .,714.259.9959 014.259.9969 16 Nov 2009 I I ; 4 PROJECT: Grand Annex DATE: 41712010 TYPE: T1 / CATALOG #: 17001 *mcgy, With all required components. Page 4 of 4 LAMP: Refer to fixture type 'TA option' BUCK " I- - 1i N M C N Job Name: Contact: Fixture Type: Part Number: BOA WALL AND CEILING ATTACHMENT Description: The Boa Wall and Ceiling Attachment is a rigid support element for Boa track systems. Available in two lengths, the Boa Wall and Ceiling Attachment attaches to the groove on the top of the track without the use of tools. The Boa Wall and Ceiling Attachment supports recommended every 3'. Part Numbers: 170535mc matte chrome and black, 2 1/4" 170536mc matte chrome and black, 3 1/2" Technical Specs: Bruck Lighting System, Inc. 15774 Gateway Circle Tustin, CA 92780 p:714.259.9959 f.,714.259.9969 16 Nov 2009 PROJECT: Grand Annex DATE: 41712010 TYPE: TA CATALOG #: 220470mc, w /170050mcgy Page 1 of 2 LAMP: GE Precise QMR16 /C / * *, SPREAD TBD B-:k1 ,J 1 C K L � Job Name: Contact: Fixture Type: Part Number: SILENA SPOT I�w MI k---i 1 5/8" Description: The Silena Spot is a clean and simple cost effective fixture that does not compromise the quality associated with Bruck products. Fixture head tilts 135 °. The Silena Spot is equipped with a safety feature where by the lamp is retained by a stainless steel spring hidden by the mount allowing re- lamping without the use of tools. Uni -plug design allows fixture to be mounted on any lighting system or ceiling canopy through the use of an appropriate adaptor, not included. Part Numbers: 220470bz bronze 220470ch chrome 220470g gold 220470mc matte chrome Technical Specs: 12V AC /DC input 50VA, 50W for 1 (maximum 50 watt lamp) GU5.3 socket (for MR16) Suitable for dry locations only Dimmable Bruck Lighting System, Inc. 15774 Gateway circle Tustin, CA 92780 p:714.259.9959 F.714.259.9969 12 Nov 2009 PROJECT: Grand Annex DATE: 41712010 TYPE: TA CATALOG #: 220470mc, w /170050mcgy Page 2 of 2 LAMP: GE Precise QMR16 /C / * *, SPREAD TBD Job Name: Contact: B�1 1 C �( Fixture Type: Part Number. �J 1 ` BOA ADAPTOR 1 1/8" 0 Description: The Boa Adaptor is a clamp attachment needed when connecting Uni -Light fixtures to Boa track. The adaptor can be placed anywhere along the surface of the Boa track. A metal clip on one side of the adaptor serves as both a spring clip and a conductive lead. Once installed, the Uni -light fixtures attach directly to the socket with the twist and click mechanism. Part Numbers: 170050mcgy matte chrome Technical Specs: 70W max Bruck Lighting System, Inc. 15774 Gateway Circle Tustin, CA 92780 p:714.259.9959 M4.259.9969 16 Nov 2009 PROJECT: Grand Annex 1, �} DATE: 4/712010 TYPE: U CATALOG #: RD -CL -SS Page 1 of 5 LAMP: Warm White LED MR16 Materials MODELS All body and lid assemblies are c & c milled from 60/61 - aluminum bar stock. These parts are "hard cote" anodized for hardness and corrosion resistance. Additional anodized colors are available. All lenses are manufactured using'i <" clear float tempered glass. Wiring assembly - thermal cutout and mr16 socket is manufactured by Leviton. "0" rings are V70 compound manufactured by American Packing and Gasket. All fasteners are fabricated from stainless steel. Specifications • 12 volt 20 watt 60HZ • Lamp type: MR16 max 20 watts. • Approved for both indoor and outdoor installations (wet or dry). • Approved for non -IC floor or wall installations. • Approved for poured concrete installations. • Externally mounted transformer is not supplied. • Design of the circuit components is the responsibility of the electrician installing this fixture. • This fixture shall not be subjected to any vehicular traffic. ORDERING EXAMPLE RD /CL /G RD CL G Round flush mount Clear glass Gold are certified conform to . No.2 and clC' us are certified to CSA C22.2 No.250. s,Ea PL Printed 1 /06 %17I�ITd�_\iLt1�l7 y+ RF /CL /a ,: 3' " round flared mount top (anodized aluminum and clear glass). RF /SB 33/4" round flanged mount top (anodized aluminum and sand blasted glass). SQUARE FLANGED SQ /CL 33/<" square flanged mount top (anodized aluminum and clear glass). SQ /SB 33/," square flanged mount top (anodized 1 aluminum and sand blasted glass). RD /CL 3 %" round flush mount top (anodized aluminum and clear glass). RD /SB 3' /z" round flush mount top (anodized aluminum and sand blasted glass). %17I�ITd�_\iLt1�l7 y+ RF /CL /a ,: 3' " round flared mount top (anodized aluminum and clear glass). RF /SB 33/4" round flanged mount top (anodized aluminum and sand blasted glass). SQUARE FLANGED SQ /CL 33/<" square flanged mount top (anodized aluminum and clear glass). SQ /SB 33/," square flanged mount top (anodized 1 aluminum and sand blasted glass). � t / PROJECT: Grand Annex I, 1\ DATE: 417/2010 TYPE: U CATALOG #: RD -CL -SS Page 2 of 5 LAMP: Warm White LED MR16 BronzArt lighting Pipelite -01 �I • Pipelite- 01 • Light Sconces • Identity Lighting • Wall Plates BronzArt lighting Pipelite -01 PROJECT: Grand Annex DATE: 4/7/2010 TYPE: U CATALOG #: RD -CL -SS Page 3 of 5 LAMP: Warm White LED MR16 KronzArt Lighting Pipelite -01 • Pipelite- 01 • Light Sconces • Identity Lighting • Wall Plates PROJECT: Grand Annex DATE., 4/712010 TYPE: U j) CATALOG #: RD -CL -SS Page 4 of 5 LAMP: Warm White LED MR16 BronzArt Lighting Pipelite -1" • Pipelite- 01 • Light Sconces • Identity Lighting • Wall Plates / PROJECT: Grand Annex 1, (\ DATE: 4/7/2010 TYPE: U CATALOG #: RD -CL -SS Page 5 of 5 LAMP: Warm White LED MR16 1 1/2 „ 1 t 3 +$„ 31/8" • Pipelite- 01 • Light Sconces • Identity Lighting • Wall Plates Flanged Top 33/4„ Flush Top 31/2„ Flange on BronzArt Lighting Pipelite -01 PROJECT: Grand Annex DATE: 4/7/2010 TYPE: Control 1 CATALOG #: H8Pr"" -120 ILAMP: Page 1 of 4 8 Series P5 Processors Model Numbers H8P5 -120: Wired Processor only. H8P5 -D48 -120: Wired Processor with one integral Dimmer Interface (D48). H8P5 -H48 -120: Wired Processor with one integral Dimmer Interface (H48). H8P5 -MI -120: Wired Processor with one integral Module Interface. H8P5 -MI -D48 -120: Wired Processor with one integral Module Interface and one integral Dimmer Interface (D48). H8P5 -MI -H48 -120: Wired Processor with one integral Module Interface and one intearaL Dimmer Interface (H48). Input Voltage 120 V'— 50/60 Hz Regulatory Approvals UL, CSA, NOM Environment Ambient operating temperature: 0 °C to 40 °C, 32 °F to 104 °F Ambient operating humidity: 0 -90% humidity, non - condensing. Indoor use only. Cooling Method Passive coolino. Heat Generated 18 BTUs per hr. fully Loaded Line - Voltage Mates with Lutron - provided 2 -pin pigtail on DIN -rail terminal block. Power switch provided Connections on top left of processor. ESD Protection Terminal blocks should be tightened to 3.5 -5.0 in. -Lbs. (0.40 -0.57 N•m) Low - Voltage Two pair — one pair #18 AWG (1.0 mm,), one pair #18 -22 AWG (1.0 -0.5 mm,) twisted shield - Wire Type ed — NEC. Class 2 (IEC PELV) cable. Low - Voltage All processors in a multi- processor system must have the inter- processor communication links Wiring Configuration connected in a daisy -chain configuration. Low - Voltage 4 -pin removable terminal block. Each of the four terminals will accept up to two #18 AWG Connections (1.0 mm,) wires. Up to two standard female DB -9 serial RS -232 connections and one RJ -45 standard ethernet connection. Addressing Via DIP Switch. Counts as 1 of 16 processor addresses. See Fig. 7, pg. 96. Diagnostics Power LED, Communication Link power short circuit LED, Links 1 -8 Tx and Rx LEDs. ESD Protection Meets or exceeds the IEC 61000 -4 -2 standard. Surge Protection Meets or exceeds ANSI /IEEE standard c62.41. Miswire All terminal block inputs are over - voltage and miswire protected against wire reversals and Protection shorts. Power- Failure Memory Lithium battery provides a minimum of ten years of data retention. Internal Timeclock Accuracy t 1 minute per year (specified as during data retention time). Mounting HWI- PNL -B: Processor mounts at bottom of panel. See Fig. 10, pg. 98. HWI -LV32 -120: Processor mounts at top of enclosure. See Fig. 9, pg. 98. Mounting Hole See Fig. 6, pg. 96. Locations Shipping Weight 9 lbs. (4.1 kg) (at[ model numbers) LIJTROU http: / /resi.lutron.com Technical Support: product @tutron.com 95 I t / PROJECT: Grand Annex 1\ DATE: 4/7/2010 TYPE: J CATALOG #: H8P5 -"' -120 Control LAMP: Page 2 of 4 8 Series P5 Processors (cont.) f RPM harness (H8P5 -MI -120, 8 Power Coro H8P5- MI -H48 -120, and ,8P5_01,48-120 H8P5- 48 -120 only) 6 4 2 Mounting Hole Power Switch Link Identification Label OFF ON :LUTRON Normal Mode Boot Mode L User - Configured Baud Rate 9600 Baud 3 -6 ° 2Q 90 QQ RQ QQ Q Q 1 .6 Fl. 0 Processor Board (all models) 0 _ Dimmer Hub (H8P5 -H48 -120, H8P5 -D48 -120, H8P5- MI- H48- 120(shown), and H8P5 -MI -D48 -120 only) Mounting Keyhole Contact Closure Configuration Mounting Keyhole Inputs Switch Ethernet Port Figure 6 - 8 Series P5 Processor (H8P5- MI -H48 -120 shown) 1 2 3 4 5 6 7 8 OM IM 90 sW 90 `10M 'um _W] W "W _fm -a] _0M "W "M °EU 9 10 11 12 13 14 15 16 -no 1W „Em ,.rte -RU „ice "[M `"W ,..W] -cm 'Wj oflm -IM -W -UN oW Figure 7 - Address DIP Switch Settings (configure switch Si) 7 5 3 1 HWI -MI -120 RPM harness connector(H8P5-MI- 120, H8P5- MI -H48- 120, and H8P5 -MI- D48 -120 only) #16 -24 AWG (1.5 mm'- 0.5 mm') Wiring Manual Override Switch Example: Setting Switch #6 ON. OFF - Lek 4 ON -Right Configuration DIP Switches DIP Switch OFF ON 1 Normal Mode Boot Mode 2 User - Configured Baud Rate 9600 Baud 3 -6 Address 96 - ";;`LUTRON Technical Support • 24 Hours a Day 17 Days a Week • 1.800.523.9466 I I f I ) ( �' PROJECT: Grand Annex TYPE: DATE: 417/2010 CATALOG #: H8P5-**-120 Control LAMP: Page 3 of 4 8 Series P5 Processors (cont.) Front View 11.56 in (293.6 mm) 0.93 in (23.61 mm) 10 in (254 mm) Figure 8 — 8 Series P5 Processor Dimensions Side View 10%LUTRON http.-Ilre5i.lutron.com Technical Support: product@lutron.com 97 5.93 in (150.61 mm) N QLUTR• -0130 M m r��2 �-o 1m) ------------------ 11.96 in r I-- PEN (303.66 mm) 9.95 (252.8 in MM) O C 0 1 0 LIN' 6 L11- 0 Ir COW k., W 0 W a 0 0"001 1 in (25.4 mm) 0.93 in (23.61 mm) 10 in (254 mm) Figure 8 — 8 Series P5 Processor Dimensions Side View 10%LUTRON http.-Ilre5i.lutron.com Technical Support: product@lutron.com 97 > r , i j PROJECT: Grand Annex DATE: 4/712010 TYPE: CATALOG #: H8P5 -** -120 Control LAMP: Page 4 of 4 8 Series P5 Processors (cont.) Preferred Power Wiring Entry HomeWorks Processor Eli t � � 7� 7 Control Wiring Entry (Class 2) Figure 9 — Mounting Location in an HWI -LV32 -120 Preferred Power Wiring Entry HomeWorks Processor 3`A in (8.25 cm) Attemate Power Wiring Entry Control Wiring Entry (NEC Class 2; IEC PELV) Figure 10 — Mounting Location in an HWI -PNL -8 98 -°�,„€`LUTROU Technical Support - 24 Hours a Day 17 Days a Week • 1.800.523.9466 A , , i . / PROJECT: Grand Annex TYPE: Fire - 1` DATE: 4/7/2010 Rated i CATALOG #: EZB 16 -24 -9, With all required components. LAMP: Enclosure Page 1 of 3 NOXIV barpler ♦ o FIRE -RATED Fire -Rated Recessed Light Enclosure Architects, specifiers and installers can easily maintain the integrity of fire -rated ceilings for one -hour by using the e.z. barrier enclosure for recessed lights. With the e.z. barrier one -hour fire -rated enclosure, recessed lights can be installed in a fraction of the time that it would take to hand -build an enclosure. Recessed Light Enclosure Model # ezb 16 -24 -9 (does not include recessed light) Once you fasten the four screws, your enclosure is ready to go. Simply install your light and you're on to the next one. You'll reduce time and labor costs while ensuring compliance to building codes. When it comes to one -hour fire -rated enclosures, count on e.z. barrier solutions from the fire -rated enclosure experts. We make it easy for you: Ez to install. Ez to save money. Ez to meet the fire code. 20777 kensington Blvd. Lakeville, MN 55044 Ph.952.985.8851 Fax 952.469.6565 sales @ezbarrier.net www.ezbarrier.com Proudly made in the USA ICE—= • ! , I J PROJECT: Grand Annex TYPE: Fire - t\ DATE:4 /7/2010 Rated I l CATALOG #: EZB 16 -24 -9, With all required components. LAMP: Enclosure Page 2 of 3 Product Features for Model # ezb 16 -24 -9 • Fits both 16" and 24" on- center applications; one size fits most applications' • Attaches quickly with drywall screws, saving time and labor • Features 4 knockouts for wiring flexibility with easy access from any direction • Provides sound reduction • Stores and transports easily with tapered design • Maintains vapor barrier integrity to meet new "airtight building" codes • Maintenance free • Can be used on either interior or exterior applications • Can be used with either non IC rated or IC rated fixtures • Maintains air space even when using blown -in insulation to eliminate light fixture cycling • Affixed directly to the structure • No product modifications required. Reduces risk of incorrect product installation or movement during or after construction 'For jobs that are narrower than 16" on- center, the adjustable ezb 16 -24 -9 split model may be an option; contact e.z. barrier to learn more. Meets One -Hour Fire - Rating Enclosure Codes Contains fire, gas, smoke and heat within the enclosure for 60 minutes, preventing leakage through the as- sembly into duct work. Meets the following codes: • ASTM E119 -05a • UL 263 Certified by Omega Point Laboratories • UBC 7 -1 • NFPA 251 • ANSI A2.1 Certified by Intertek & Warnock Hersey us Specifications • Flanges: 2 5/8" wide for easy mounting • Material: Corrosion - resistant metal • Internal Dimensions: 20 -1/8" long x 12" wide x 9 -1/2" deep • Stackable and packed 6 per case for easy shipping and handling 20777 kensington Blvd. Lakeville, MN 55044 Ph.952.985.8851 Fax 952.469.6565 sales @ezbarrier.net www.ezbarrier.com Proudly made in the USA . r , , PROJECT: Grand Annex TYPE: Fire - DATE: 4/712010 Rated I i CATALOG #: EZB 16 -24 -9, With all required components. LAMP: Enclosure Page 3 of 3 FIRE -RATED Fire -Rated Recessed Light Enclosure INSTALLATION INSTRUCTIONS 1. Mounting of membrane fire barrier enclosure shall be in full compliance with manufacturer's published mounting recommendations and include four drywall screws a minimum of 1 -1/4" in length fully bored into the structural elements at predrilled locations in the flanges of the membrane fire barrier. Required drywall mounting channels shall be mounted after the membrane fire barrier is installed as per UL Fire Resistance Directory Design Number L528. 2. There shall be a maximum of two membrane fire barrier enclosures located within any 36 square foot area of the ceiling. 3. Minimum of 24" on center spacing within any single truss cavity. 4. Minimum of 34" center -to- center fixture spacing for adjacent truss cavities. 5. Firestop seal (as listed with Omega Point Laboratories) shall be applied to fill voids or cavities around the power supply wire where it exits the recessed e.z. barrier membrane - penetration fire barrier system as specified in the manufacturer's written instructions. 20777 kensington Blvd. Lakeville, MN 55044 Ph.952.985.8851 Fax 952.469.6565 sales @ezbarrier.net www.ezbarrier.com Proudly made in the USA t , , J PROJECT: Grand Annex (` DATE: 4 /7/2010 TYPE: Iii ° CATALOG #: GE Precise 050 /MR16 /C /Spread TBD 16 LAMP: Page 1 of 1 Halogen Lamps MR Tom & Lock ConstantColor• 2-An =E�MWMEN 10858 QZOMRI6E/CGISESX 12 20 1.6 1.88 rrr WM 2900 " 20,2b.4f.90,lOC Narrow Spot AN5IE5X G113 20 20857 Q2aMR16C/CWOBAB 12 20 C -6 1.88 50M 2900 475 2a21b.49a,lk Flood. ANSI: BAB �1 =E�WW r•r r s r 12 r =WN rr rrr M= 3000 " 2a,2b,4f9o,10c NarrowSpot, ANSI, FRB 35 20860 Q35MR16C1CG20 12 20 Cfi 188 5000 3000 3200 Spot, ANSI : FRA rr E rr.. ., ®W ZO =EE 188 =M =0= 9000 ' ' •' Flood, ANSI FMW 35 41487 p35MR161CCG40 24 20 CC -6 1.88 4000 2950 920 Floodlight rr �� QSDMRI6UCG15 ®���■ 20 Cfi 1.88 rrr -� 3050 :rrr 2a,2b,4f9a,lOC Narrow Spot AN51:EX1 50 20871 QSOMR36C/CG25 12 20 C -6 188 6000 3050 29000 2a,2b,4f90.10, Narrow Spot, ANSI EXZ 50 20867 Q50MR16UCG40 12 20 C -6 188 6000 3050 1500 2a2b,4f.9a,10c Flood, ANSI. EXN 50 20865 QSOMRI600055 12 20 C -6 I.BB 6000 3050 850 2a,2b,4f,9a,10c Wide Flood, ANSI: FNV MR Tom & Lock ConstantColor• ConstantColor• Precise° Cover Glass MR16 MR16 2-An 20 10858 QZOMRI6E/CGISESX 12 20 1.6 1.88 1000 2900 3150 20,2b.4f.90,lOC Narrow Spot AN5IE5X G113 20 20857 Q2aMR16C/CWOBAB 12 20 C -6 1.88 50M 2900 475 2a21b.49a,lk Flood. ANSI: BAB �1 r r•r r s r 12 r C -6 rr r 3000 7500 2a,2b,4f9o,10c NarrowSpot, ANSI, FRB 35 20860 Q35MR16C1CG20 12 20 Cfi 188 5000 3000 3200 2a,2b,4f,9a,10c Spot, ANSI : FRA 35 20859 035MR16UCG40 12 ZO Cfi 188 5000 3000 9000 2a,2b,df,9a,70c Flood, ANSI FMW ConstantColor• Precise° Cover Glass MR16 MR16 2-An 20 10858 QZOMRI6E/CGISESX 12 20 1.6 1.88 1000 2900 3150 20,2b.4f.90,lOC Narrow Spot AN5IE5X G113 20 20857 Q2aMR16C/CWOBAB 12 20 C -6 1.88 50M 2900 475 2a21b.49a,lk Flood. ANSI: BAB �1 35 20864 035MR161MG12 12 20 C -6 188 5000 3000 7500 2a,2b,4f9o,10c NarrowSpot, ANSI, FRB 35 20860 Q35MR16C1CG20 12 20 Cfi 188 5000 3000 3200 2a,2b,4f,9a,10c Spot, ANSI : FRA 35 20859 035MR16UCG40 12 ZO Cfi 188 5000 3000 9000 2a,2b,df,9a,70c Flood, ANSI FMW 35 41487 p35MR161CCG40 24 20 CC -6 1.88 4000 2950 920 2a,2b,4f,9a,lOC Floodlight 50 20872 QSDMRI6UCG15 12 20 Cfi 1.88 6000 3050 8400 2a,2b,4f9a,lOC Narrow Spot AN51:EX1 50 20871 QSOMR36C/CG25 12 20 C -6 188 6000 3050 29000 2a,2b,4f90.10, Narrow Spot, ANSI EXZ 50 20867 Q50MR16UCG40 12 20 C -6 188 6000 3050 1500 2a2b,4f.9a,10c Flood, ANSI. EXN 50 20865 QSOMRI600055 12 20 C -6 I.BB 6000 3050 850 2a,2b,4f,9a,10c Wide Flood, ANSI: FNV 50 41488 Q50MR16/C/CGIS 24 20 CC -6 1B8 4000 2950 8400 2a,2b,4f,90.10c Narrow Spot MR26 2 -Pin 6X5 3 50 41489 OSOMRI6/C /CG40 24 20 CC -6 188 4000 2950 1570 2a2b,4f,9o,lk Floodlight 71 20876 Q71MR16UCG15 12 20 C -6 188 4000 3050 108000 2a.2b,4f.9a,lOC Narrow Spot ANA: EYF 71 20874 Q71MR16/C/CG25 12 20 C -6 1.88 4000 3050 4550 2a,Zbdf,9a,I0c Narrow Spat, ANSI: EYJ Precise" Cover Goss IR MR16 71 20873 Q71MR16 /C/CG40 12 20 C -6 1.88 11 4000 3050 2000 3000 2a,2b,4f.9a 1 Flood ANSL EYC ConstantColol Precise" MR16 My�R16' 2 -P,n GX53 20 20816 Q20MR16/CNNSP7 12 20 CC -6 188 3000 2900 7400 2a,21,4a,4c,4e,4f,9o, 9d, 106.10, Very Narrow Spot ANSI: FZK 20 20815 020MR161CMSP15 12 20 C -6 188 5000 2900 3750 2o,2j 4aA<,4e.4(,9a, 9111 Nortow Spot ANSI:ESX �1 20 20814 Q20MR16C/FL40 12 20 C -6 1.88 5000 2900 525 2a.2j 4o.4c,4e.4f,go. 9d. 10b10C Flood. ANSI: BAB 35 20826 Q3$1,11116/C/SP20 12 20 C -6 1B8 5000 3000 39000 2a,2j4oAc 4e,4f9a, 9d, I0b.10c Spot, ANSI: FRA 35 20825 035MR16rAt40 12 20 C -6 138 5000 3000 1000 2a,2j400e.4fk, 9d. 106.10, Flood. ANSI FMW 42 20830 042MR161C /i 12 20 CC -6 1.88 3500 3000 12300 2a2j,4o,4c,4epf9a, 91 10b,10c Very Narrow Spot, ANSI: FZY 50 20839 0501MR16 1C/NSP15 12 20 C -6 188 WW 3050 9100 202j4a,4,Ae6f,9a, go, 10b,10c Narrow Spot ANSI. EXI 50 20835 050MR16/CMFL25 12 20 C -6 188 6000 3050 3200 2a2j 4a.4cAe.4f9a, 9d. 10610, Narrow Flood, ANSI EXZ 50 20834 050MR16UNFL30 12 20 C -6 188 6000 3050 2500 2a,21.4a,4c4e,4f9o, 9d, 10b.10c Narrow flood, ANSI. EXK 50 20833 Q50MR16/C/FL40 12 20 C -6 188 60M 3050 17000 2o2j40.4r.0.40a, 9d, 10610, Flood. ANSI EXN 50 20832 Q5aMR16KA4Ft55 12 20 C -6 188 6000 3050 9000 2o,2j 4a,4c,4e.4f9o, 91 10b.10c Wide Flood, ANSI FNV MR26 2 -Pin 6X5 3 71 20843 Q7IMRIBrCMSP15 12 20 C -6 188 4000 3050 11500 2a,2j4odcpeAf90, go. 0, Narrow Spot, ANSI: EYF 71 20841 Q71MR16/CRJFL25 12 20 C -6 188 4000 3050 5500 a.4c,4 2a,2j,4a,dc,4e,4f90. 9d, 106.10, Narrow Flood, ANSI EVJ 71 20840 Q71MR16/C7FL40 12 20 C -6 1.88 4000 3050 2200 2a,2Jp0,4c,4e,4f90, 9d, 10b,10c Flood. ANSI EYC Precise" Cover Goss IR MR16 2fin 20 28709 Q20MR16MIR/CG10 12 20 11 188 5000 3000 6000 2a26A191,10c Narrow Spot GU5.3 20 28710 020MR16MIRIC625 12 20 C8 1.88 5000 3000 2300 2o.Zb4f9a,lOC Narrow Fload 20 28718 Q20MR16MIR7CG35 12 20 C 8 1.88 5000 3000 1000 Za,2b,490,10c Flood 37 16715 037MR161HIR/CG10 12 20 C -8 180 5000 3000 125W 20,2b,4f9o.lOC Narrows t 37 16716 Q37MR16MIR7CG25 12 20 C -8 1.80 5000 3000 4400 Z..,a,;f9a,,0c Narrow Flood 37 16717 Q37MR16MIR/CG40 12 20 C -8 180 5000 3000 2050 2o,21,Af,9i flood 50 16718 QS0MR16MIR/CG10 12 20 C -8 180 5000 3000 150000 2a,2b,09a,10C Narrow Spot 50 16719 Q50MR16MIR/CG25 12 20 C -8 180 5000 30M 570M 2o,2b,4f,9ai Narrow Flood Forthe oast up-to -date product information• see www.gelighting.aom. To convert inches to millimeters, multiply by 25.4. 2-10 All warring and coution notices found at the end of this section (page 2 -171. '- , c 0 • j PROJECT: Grand Annex 1\ DATE: 4/7/2010 TYPE: LED CATALOG #: MS- MR16- 28- 30 -12V -D MR -16 LAMP: Page 1 of 1 LED MR16 (cut sheet to be issued) Using 3 x 3 Watt Cree X -LED chips, the 3 LED MR16 Lamp creates an even field of 2800K warm white light with a soft edge. Although the fixture contains 3 Watt chips, the chips are de -rated to just under 2 Watts. This insures a long lamp life and a low energy consumption of just 5.5 Watts for the entire fixture. ➢ Dimmable with 12VAC or 12VDC ➢ Same size and shape as standard MR16 ➢ Average Lamp Life 40,000+ hours ➢ Frequency and Peak Current Modulation provides smooth dimming from 5% -100% 6 , PROJECT: Grand Annex DATE: 4/7/2010 TYPE: TR 1 CATALOG #: * -*- *- 120- *- * -C * -* Page 1 of 1 I LAMP: Specifications Circuit Breakers The primary wiring is safe guarded by the panel breaker. An Auto reset primary breaker is standard on all transformers. Magnetic secondary protection is sized to the lighting and wiring used and adheres to Article 411 of the NEC (25 amp max per circuit). Only use PANEL breakers designated as HM (suitable for transformer loads and high in -rush currents) to avoid nuisance tripping. Transformer The transformer generates FIVE different output voltages simultaneously, each adding a 0.5 -volt boost to the output voltage. Units also include a primary (yellow) boost tap, which raises all secondary tap voltages. There are several transformer designs to choose from. See Below. Wiring Recommend using wire rated for 90 degrees Celsius (must be 75 C Minimum). Warranty AN of these units are warranted fully for 25 years from date of shipment. This warranty covers only properly installed units. Semper Fi, at its option, will repair or replace defective units if an inspection determines the unit to be defective under the warranty. The customer is responsible for retuming the unit to Semper Fi to be inspected. Repair or replace- ment of the unit shag constitute the warranty and does NOT cover freight, installation, tabor, or any other charges. UL Listed All units are UL Listed and adhere to Article 411 of the National Electric Code. 1 Door # Small Med. Large External A = 11.50" 14.00" 22.00" Dimensions B = 9.50 " 15.75" 15.75" * If more than one amperage is required, Housing # Small Med. Large How the housing is to be mounted C = 10.00" 12.00" 20.00" Approximate D = 8.00" 14.25" 14.25" 2= Quad (G), Trio (T), Duo (D) or up to (8) Eight transformers in a single enclosure Depth = 3.875" 3.875" 3.875" Maximum wattage on transformer (at any tap) Material 18 Ga. 16 Ga. 16 Ga. 4 Lbs 1/2" Knockouts 7 30 51 (100) 100 watt maximum bad (Recessed or Surface mounted) 3/4" Knockouts o 7 12 Housing B Welded CR del provided with support brackets fo recessed (250) 250 watt maximum bad (Surface Mounded ONLY) Wall mounting. Dimensions do not include mounting brackets. All internal components are removable to 12 Lbs facilitate installation to facilitate installation (ExcL Small). (450) 450 watt maximum bad (Recessed or Surface mounted) Mounting C surface mount on a wall or ceiling. Recess into an 18 Lbs insulated wall Unit is approved for use indoors, including (900) 900 watt maximum bad (Recessed or Surface mounted) ventilated attics, basements and garages. Limit ambient 1200 watts divided into temperature to 40 degrees Celsius (105 °F). 26 Lbs Door D Attatiled to the housing with 4 countersunk screws. Primary voltage Color Black powder coat is the standard color. 5= 12 volt (12), 24 vom(24), or HALF 12 and 24 volt(H) available on 1200 and 1400 watt units Call for other options or custom color request Circuit Breakers The primary wiring is safe guarded by the panel breaker. An Auto reset primary breaker is standard on all transformers. Magnetic secondary protection is sized to the lighting and wiring used and adheres to Article 411 of the NEC (25 amp max per circuit). Only use PANEL breakers designated as HM (suitable for transformer loads and high in -rush currents) to avoid nuisance tripping. Transformer The transformer generates FIVE different output voltages simultaneously, each adding a 0.5 -volt boost to the output voltage. Units also include a primary (yellow) boost tap, which raises all secondary tap voltages. There are several transformer designs to choose from. See Below. Wiring Recommend using wire rated for 90 degrees Celsius (must be 75 C Minimum). Warranty AN of these units are warranted fully for 25 years from date of shipment. This warranty covers only properly installed units. Semper Fi, at its option, will repair or replace defective units if an inspection determines the unit to be defective under the warranty. The customer is responsible for retuming the unit to Semper Fi to be inspected. Repair or replace- ment of the unit shag constitute the warranty and does NOT cover freight, installation, tabor, or any other charges. UL Listed All units are UL Listed and adhere to Article 411 of the National Electric Code. 1 2 3 4 5 6* 7 8 How To I 1 _0 -0 XO +D Order * If more than one amperage is required, repeat steps 6 8 7 How the housing is to be mounted 1= Recess (R) or Surface Mount (S) Approximate Number of transfomters in a single enclosure 2= Quad (G), Trio (T), Duo (D) or up to (8) Eight transformers in a single enclosure Weight Maximum wattage on transformer (at any tap) 3= (75) 75 an maximum load (Recessed or Surface mounted) 4 Lbs (100) 100 watt maximum bad (Recessed or Surface mounted) 5 Lbs (1 50) 150 watt maximum bad (Recessed or Surface mounted) 8 Lbs (250) 250 watt maximum bad (Surface Mounded ONLY) 8 Lbs (300) 300 watt maximum bad (Recessed or Surface mounted) 12 Lbs (450) 450 watt maximum bad (Recessed or Surface mounted) 12 Lbs (600) 600 watt maximum bad (Recessed or Surface mounted) 18 Lbs (900) 900 watt maximum bad (Recessed or Surface mounted) 18 Lbs 1200 watts divided into two windings (1200) 1200 watt maximum load (Recessed or Surface mounted) 26 Lbs 1400 watts divided into two windings (1400) 1400 watt maximum load (Surface Mounted ONLY) 26 Lbs Primary voltage 4-- 120 or 240 volts (Standard), 277 and other voltages (Optional) Secondary Voltage (lamp's operating voltage) 5= 12 volt (12), 24 vom(24), or HALF 12 and 24 volt(H) available on 1200 and 1400 watt units Number of Secondary Breakers * 6-- see notes below Amperage of Secondary Breakers 7= 3, 5, 8, 10, 15, 20, or 25 amp (standard sizes) Chokes/De-Buzzing Coils 8- (CIA) - Choke for 75 and 100 watt units 1 Lb (C1) - Choke for 150 and 250 watt units 2 Lbs (C2) - Choke for 300 and 450 watt units 4 Lbs (C3) - Choke for 600 watt unit 5 Lbs (CW - Choke for 900 wan unit 6 Lbs (C4) - Choke for 1200 watt unit 10 Lbs (C4B) - Choke for 1400 watt unit 11 Lbs Other Optional Items 9= (WH) White Cover 8 Enclosure (Standard color Black) Other colors available upon request (P) Manual Reset Primary Breaker Use of (P) breaker eliminates slot available for secondary breakers (D) Surface Mount Cover - NOT Flanged - Same Size as Housing Call the Factory with all questions, comments and/or requests. Small Housing limited to maximum of 6 breakers 600 and 900 ,S, andard units limited to maximum of 6 breakers 1200 and 1400 watt Standard units limited to TRIO 8 QUAD Standard units limited to maximum of 3 breakers per transformer maximum of 10 breakers Door, Housing + Ptate Weight Large: Housing Measures 20.00" x 14.25" x 3.875" Door Measures 22.00" x 15.75" 15 Lbs Accommodates single R900,1200, S1400, DUO 600, 5900, TRIO 150, 5250, 300, 5450, QUAD 150, 5250, 300, S450 OR up to (8) EIGHT 100's Medium: Housing Measures 12.00" x 14.25" x 3.875" Door Measures 14.00" x 15.75" 11 Lbs Accommodates single R450, 600, 5900, DUO 150, 5250, 300, 5450, or QUAD 75, 100 Able to Recess into wall in either direction Small: Housing Measures 8.00" x 10.00" x 3.875" Door Measures 9.50" x 11.5 4 Lbs Accommodates single 75, 100, 150, 5250, 300, 5450 OR DUO 75, 100 Able to Recess into wall in either direction SEMPER Fi Power Supply 21 West Auburn Street Manchester, NH 03101 603.656.9729 tel 603. 656.9752 fax www.SEMPERFiPowerSupply.com i Panel Report Mechanical / Equipment Room / Panel 1 A HBPS miotie Panel Type: HWI -PNL -8 RPMs: #1 HW- RPM-4A Processor Type: H8P5- MI -D48 -120 #2 HW- RPM-4A Zone Name Interface Wattage 1 101 Internal Addresses No #3 HW- RPM -4A None Processor: 1 2 ##4 HW- RPM-4A Kitchen / art accent dnitg MI: 0 Entry / Mudroom dnitg None 150 W* D48/H48: 1 103 #5 HW- RPM-4A No Entry / Future mudroom shelf lighting None #6 HW- RPM -4A 4 Standalone D48/H48 Address: - Kitchen / counter pendants No #7 HW- RPM -4A Standalone MI Address: - 150 W* #8 HW- RPM-4A SPI Address(es): - Quantity of Wire Landing Boards: 0 ® Remote Power Modules Module #: 1 Module Type: HW- RPM-4A Module #: 2 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Interface Wattage 1 101 No No Entry / Entry dnitg None 100 W* 2 102 Kitchen / art accent dnitg No Entry / Mudroom dnitg None 150 W* 3 103 Kitchen / table dnitg No Entry / Future mudroom shelf lighting None 150 W 4 1 104 Kitchen / counter pendants No Kitchen / W. path dnitg None 150 W* Total Wattage:/* 630 W Module #: 2 Module Type: HW- RPM-4A * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:52:58 AM 1 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Circuit # Feed AFCI Zone Name Kitchen / general dnitg Interface Wattage 1 105 No None 350 W* 2 106 No Kitchen / art accent dnitg None 100 W* 3 107 No Kitchen / table dnitg None 50 W* 4 108 No Kitchen / counter pendants None 240 W Total Wattage: 840 W * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:52:58 AM 1 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / Panel 1 Module #: 3 Module Type: HW- RPM-4A Module #: 4 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Kitchen / under cabinet Interface Wattage 1 109 No No None 28 W 2 110 116 No Kitchen / future desk lighting None 150 W 3 113 117 No Living Room / general dnitg None 400 W* 4 114 121 No Living Room / table dnitg None 100w* 100 W* Total Wattage: 778 W Module #: 4 Module Type: HW- RPM-4A Module #: 5 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Interface Wattage 1 115 No No Living Room / art sccent dnitg None 150 W* 2 116 Master Bedroom / dressing area dnitg No Living Room / column monopoints None 1100W* 3 117 Master Bedroom / art accent dnitg No Living Room / beam track None 450 W* 4 121 Master Bedroom / e reading dnitg No Living Room / powder hall dnitg None 100 W* Total Wattage: 960 W Module #: 5 Module Type: HW- RPM-4A Module #: 6 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Interface Wattage 1 118 No No Living Room / fireplace sconces None 360 W 2 111 Master Bedroom / dressing area dnitg No Stair / under landing dnitg None 100 W* 3 112 Master Bedroom / art accent dnitg No Stair/ wall uplight None 81 W* 4 1 122 Master Bedroom / e reading dnitg No powder room / pendant None 240 W Total Wattage: /* 817 W Module #: 6 Module Type: HW- RPM-4A Total Wattage: ,° 700 W * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) *' Zones with interfaces appear as 25 Win Total Wattage ¢ If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 2 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Circuit # Feed AFCI Zone Name powder room / mirror reveal Interface Wattage 1 123 No None 33 W* 2 124 No Master Bedroom / dressing area dnitg None 300 W* 3 125 No Master Bedroom / art accent dnitg None 200 W* 4 j 126 No Master Bedroom / e reading dnitg None 50 W* Total Wattage: ,° 700 W * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) *' Zones with interfaces appear as 25 Win Total Wattage ¢ If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 2 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / Panel 1 Module #: 7 Module Type: HW- RPM-4A Module #: 8 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Interface Wattage 1 127 No Master Bedroom / w reading dnitg None 50 W* 2 128 134 No Master Bedroom / pendant None 360 W 3 129 135 No Master Bedroom / s wall reveal None 36 W* 4 130 136 No Master Bedroom / s wall uplight None 48 W* 100 W* Total Wattage: 521 W Module #: 8 Module Type: HW- RPM-4A Total Wattage:'- 450 W ' Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) Zones with interfaces appear as 25 W in Total Wattage $ If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 3 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Circuit # Feed AFCI Zone Name Interface Wattage 1 132 No Master Bedroom / future shelf lighting None 150 W 2 134 No Master Bath / general dnitg None 100 W* 3 135 No Master Bath / tub dnitg None 50 W* 4 136 No Master Bath / shower dnitg None 100 W* Total Wattage:'- 450 W ' Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) Zones with interfaces appear as 25 W in Total Wattage $ If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 3 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / Panel 2 R�R i p Panel Type: HWI -PNL -B RPMs: #1 HW- RPM-4A Processor Type: - #2 HW- RPM-4A Zone Name Interface Wattage 1 137 Internal Addresses No #3 HW- RPM-4A None Processor: - 2 ##4 HW- RPM -4A MI: - Master Bath / s vanity sconces None 240 W D48/H48: - 139 #5 HW- RPM -4A No Master Bath / w vanity sconces None #6 HW- RPM-4A Standalone D48/H48 Address: 201 #7 HW- RPM-4A Standalone MI Address: 1 None 100 W* #8 HW- RPM -4R SPI Address(es): Quantity of Wire Landing Boards: 0 ® Remote Power Modules Module #: 1 Module Type: HW- RPM -4A Module #: 2 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Interface Wattage 1 137 No Master Bath / we dnitg None 100 W* 2 138 No Master Bath / s vanity sconces None 240 W 3 139 No Master Bath / w vanity sconces None 240 W 41 201 No Bath 1 / general dnitg None 100 W* Total Wattage: 720 W Module #: 2 Module Type: HW- RPM-4A * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 4 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Circuit # Feed AFCI Zone Name Interface Wattage 1 202 No Bath 1 / vanity sconces None 360 W 2 203 No Bath 1 / we pendant None 240 W 3 204 No Bath 1 / shower Itg None 20 W* 4 216 No Bath 2 / general dnitg None 100w* Total Wattage: 744 W * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 4 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / Panel 2 Module #: 3 Module Type: HW- RPM-4A 1 Circuit # 217 Feed AFCI Zone Name Bath 2 / shower Itg Interface Wattage No None 20 W* 2 218 None No Bath 2 / vanity sconces None 360 W 3 219 None No Bath 2 / we dnitg None 100 W* 4 221 None No Hall / general dlntg None 400 W* No Total Wattage: � 984 W Module #: 4 Module Type: HW- RPM-4A Total Wattage: �° 840 W Module #: 5 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Interface Wattage 1 222 No No Hall / pendants None 480 W 2 223 Bed 2 / uplight No Hall / door sconce None 120 W 3 224 Bed 2 / future closet lighting No Hall / cove None 120 W* 4 225 No Hall / wall slot None 80 W* Total Wattage: �° 840 W Module #: 5 Module Type: HW- RPM-4A Module #: 6 Module Type: HW- RPM-4A Circuit # Feed AFCI Zone Name Interface Wattage 1 205 No No Bed 1 / general dnitg None 250 W* 2 206 Bed 2 / uplight No Bed 1 / crib dnitg None 100 W* 3 210 Bed 2 / future closet lighting No Bed 1 / floating tv shelf None 48 W* 4 1 213 No Bed 2 / general dnitg None 450 W* Total Wattage: 1018 W Module #: 6 Module Type: HW- RPM-4A * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage ¢ If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 5 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Circuit # Feed AFCI Zone Name Bed 1 / future closet shelf lighting Interface Wattage 1 212 No None 150 W 2 214 No Bed 2 / uplight None 84 W* 3 215 No Bed 2 / future closet lighting None 450 W 4 ITotal Wattage: 701 W * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage ¢ If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 5 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / Panel 2 Module #: 7 Module Type: HW -RPM -4A Module #: 8 Module Type: HW- RPM-4R Chug # Feed AFCI Zone Name Living Room / deck sconces Interface Wattage 1 801 No None 240 W 2 802 131 No Master Bedroom / deck sconces None 120 W 3 3 211 No Bed 1 /table lamp None 4 4 Total Wattage: 360 W Module #: 8 Module Type: HW- RPM-4R * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 6 F: \PROJECTS \Mosaic Arch ite cts\Ange lo Condo \Control \10 -0405 grand annex.HDF Circuit # Feed AFCI Zone Name Interface Wattage 1 119 No Living Room / table lamps None 720 W 2 131 No Master Bedroom / dressing area lamps None 360 W 3 211 No Bed 1 /table lamp None 180 W 4 Total Wattage: 1260 W * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:52:59 AM 6 F: \PROJECTS \Mosaic Arch ite cts\Ange lo Condo \Control \10 -0405 grand annex.HDF I • ' Panel Report Mechanical / Equipment Room / Panel 3 Panel Type: HWI -PNL -5 RPMs: #1 HW- RPM-4R Processor Type: - #2 HW- RPM-4R Internal Addresses Processor: Mt: D48/H48: Standalone D48/H48 Address: - Standalone MI Address: 2 SPI Address(es): - Quantity of Wire Landing Boards: 0 ® Remote Power Modules Module #: 1 Module Type: HW- RPM-4R Module #: 2 Module Type: HW -RPM -4R Circuit # Feed AFCI Zone Name Interface Wattage 1 207 Laundry / recessed lighting No Bed 1 / n bunk Itg None 36 W 2 208 Living Room /fireplace ignitor No Bed 1 /table Itg None 36W 3 209 Master Bedroom / fp ignitor No Bed 1 / s bunk Itg None 36 W 4 140 Master Bedroom / deck fp ignitor No Storage/ recessed 1x1 None 36 W Total Wattage: 144 W Module #: 2 Module Type: HW -RPM -4R Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:53:00 AM 7 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Circuit # 220 Feed AFCI Zone Name Interface Wattage 1 No Laundry / recessed lighting None 36W 2 120 No Living Room /fireplace ignitor None 150 W 3 133 No Master Bedroom / fp ignitor None 150 W 4 803 No Master Bedroom / deck fp ignitor None 150 W Total Wattage: '* 486 W Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:53:00 AM 7 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / Panel 4 (I =1 i Ioo� O Ioo o rGO � Panel Type: SVQ- 10 -PNL RPMs: Processor Type: - Internal Addresses Processor: MI: D48/H48: Standalone D48/H48 Address: Standalone MI Address: - SPI Address(es): Quantity of Wire Landing Boards: 0 * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage ¢ If shown, a power booster solution could not be determined 4/7/2010 9:53:00 AM 8 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / Q96 1 ® 1 Panel Type: HWI -Q96 RPMs: Processor Type: - Internal Addresses Processor: MI: D48/H48: Standalone D48/1-148 Address: Standalone MI Address: - SPI Address(es): - Quantity of Wire Landing Boards: 0 ' Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) Zones with interfaces appear as 25 W in Total Wattage If shown, a power booster solution could not be determined 4/7/2010 9:53:00 AM 9 F:\ PROJECTS \Mosaic Arch ite cts\Angelo Condo \Control \10 -0405 grand annex.HDF • , Panel Report Mechanical / Equipment Room / Panel 5 tj G G p p CO 0 0 0 ��o 0 Panel Type: SVQ- 10 -PNL RPMs: Processor Type: - Internal Addresses Processor: MI: D48/H48: Standalone D48/H48 Address: Standalone MI Address: SPI Address(es): Quantity of Wire Landing Boards: 0 * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage ¢ If shown, a power booster solution could not be determined 4/7/2010 9:53:00 AM 10 F: \PROJECTS \Mosaic Architects\Angelo Condo \Control \10 -0405 grand annex.HDF Panel Report Mechanical / Equipment Room / RF Repeater 1 El Panel Type: HR- REP -120 RPMs: Processor Type: - Internal Addresses Processor: MI: D48/H48: Standalone D48/1-148 Address: Standalone MI Address: SPI Address(es): Quantity of Wire Landing Boards: 0 * Zone wattage will be increased in total wattage to take into account transformer derating (MLV, NCC loads) ** Zones with interfaces appear as 25 W in Total Wattage ¢ If shown, a power booster solution could not be determined 4/7/2010 9:53:00 AM 11 F: \PROJECTS \Mosaic Arch ite cts\Angelo Condo \Control \10 -0405 grand annex.HDF Load Schedule Report Circuit # Feed AFCI Area / Room / Zone Name Fixture Load Type Fixture Total Load (w) (W) (Qty) S01 No LT -1.1 / Master Bedroom / s. shade ® Wired QED Shade QED Shade 0 W 1 0 W S02 No LT -1.1 / Living Room / w. shade ® Wired QED Shade QED Shade 0 W 1 0 W S03 No LT -1.1 / Living Room / s.w. shade ® Wired QED Shade QED Shade 0 W 1 0 W SO4 No LT -1.1 / Living Room / s. center shade ® Wired QED Shade QED Shade 0 W 1 0 W S05 No LT -1.1 / Living Room / s.e. shade ® Wired QED Shade QED Shade 0 W 1 0 W S06 No LT -1.1 / Living Room / e. shade ® Wired QED Shade QED Shade 0 W 1 0 W S07 No LT -1.1 / Living Room / glass roof w. shade ® Wired QED Shade QED Shade 0 W 1 0 W S08 No LT -1.1 / Living Room / glass roof center shade ® Wired QED Shade QED Shade 0 W 1 0 W S09 No LT -1.1 / Living Room / glass roof e. shade ® Wired QED Shade QED Shade 0 W 1 0 W S10 No LT -1.2 / Bed 1 / shade ® Wired QED Shade QED Shade 0 W 1 0 W S11 No LT -1.2 / Bed 2 / s.w. shade ® Wired QED Shade QED Shade 0 W 1 0 W S12 No LT -1.2 / Bed 2 / s.e. shade ® Wired QED Shade QED Shade 0 W 1 0 W 101 No LT -1.1 / Entry / Entry dnitg ® B MLV Dimmed 50 W 2 100 W 102 No LT -1.1 / Entry / Mudroom dnitg ® B MLV Dimmed 50W 3 150 W 103 No LT -1.1 / Entry / Future mudroom shelf lighting 0 Junction Box INC Dimmed 150 W 1 150 W 104 No LT -1.1 / Kitchen / W. path dnitg ® B MLV Dimmed 50W 3 150 W 105 No LT -1.1 /Kitchen/ general dnitg ® B MLV Dimmed 50W 7 350 W 106 No LT -1.1 /Kitchen/ art accent dnitg ® B MLV Dimmed 50W 2 100 W 107 No LT -1.1 /Kitchen/ table dnitg ® B MLV Dimmed 50W 1 50W 108 No LT -1.1 / Kitchen / counter pendants ID7 INC Dimmed 120 W 2 240 W 4/7/2010 9:51:10 AM 1 F: \PROJECTS \Mosaic Arch itects\Angelo Condo \Control \10 -0405 grand annex.HDF Load Schedule Report Circuit # Feed AFCI Area / Room / Zone Name Fixture Load Type Fixture Total Load (W) (W) (Qty) 109 No LT -1.1 /Kitchen/ under cabinet ® D ELV Dimmed 7 W 4 28W 110 No LT -1.1 /Kitchen/ future desk lighting Junction Box INC Dimmed 150 W 1 150 W 111 No LT -1.1 / Stair / under landing dnitg ® B MLV Dimmed 50W 2 100 W 112 No LT -1.1 /Stair/ wall uplight 0 U MLV Dimmed 9 W 9 81 W 113 No LT -1.1 /Living Room/ general dnitg ® B MLV Dimmed 50 W 8 400 W 114 No LT -1.1 / Living Room / table dnitg ® B MLV Dimmed 50W 2 100 W 115 No LT -1.1 / Living Room / art sccent dnitg ® B MLV Dimmed 50W 3 150 W 116 No LT -1.1 / Living Room / column monopoints ® M MLV Dimmed 50W 2 100 W 117 No LT -1.1 /Living Room/ beam track ® TA MLV Dimmed 50 W 9 450 W I!, 118 No LT -1.1 / Living Room / fireplace sconces ® ID2 INC Dimmed 180 W 2 360 W 119 No LT -1.1 / Living Room / table lamps TL NonDim 180 W 4 720 W 120 No LT -1.1 / Living Room / fireplace ignitor 0 FP ignitor RLY 150 W 1 150 W 121 No LT -1.1 / Living Room / powder hall dnitg ® B MLV Dimmed 50W 2 100 W 122 No LT -1.1 /powder room/ pendant ® ID1 INC Dimmed 240 W 1 240 W 123 No LT -1.1 /powder room/ mirror reveal ■ R MLV Dimmed 3 W 11 33W 124 No LT -1.1 / Master Bedroom / dressing area dnitg ® B MLV Dimmed 50W 6 300 W 125 No LT -1.1 / Master Bedroom / art accent dnitg ® B MLV Dimmed 50 W 4 200 W 126 No LT -1.1 / Master Bedroom / e reading dnitg ® B MLV Dimmed 50 W 1 50W 127 No LT -1.1 / Master Bedroom / w reading dnitg ® B MLV Dimmed 50 W 1 50W 128 No LT -1.1 /Master Bedroom/ pendant ID4 INC Dimmed 360 W 1 360 W 4/7/2010 9:51:10 AM 2 F: \PROJECTS \Mosaic Arch itects\Angelo Condo \Control \10 -0405 grand annex.HDF Load Schedule Report Circuit # Feed AFCI Area / Room / Zone Name Fixture Load Type Fixture Total Load (W) (W) (Qty) 129 No LT -1.1 / Master Bedroom / s wall reveal K MLV Dimmed 6 W 6 36 W 130 No LT -1.1 / Master Bedroom / s wall uplight K MLV Dimmed 6 W 8 48W 131 No LT -1.1 / Master Bedroom / dressing area lamps TL NonDim 180 W 2 360 W 132 No LT -1.1 / Master Bedroom / future shelf lighting Q Junction Box INC Dimmed 150 W 1 150 W 133 No LT -1.1 / Master Bedroom / fp ignitor 0 FP ignitor RLY 150 W 1 150 W 134 No LT -1.1 / Master Bath / general dnitg ® B MLV Dimmed 50W 2 100 W 135 No LT -1.1 / Master Bath / tub dnitg ® C MLV Dimmed 50W 1 50W 136 No LT -1.1 /Master Bath/ shower dnitg ® C MLV Dimmed 50W 2 100 W 137 No LT -1.1 /Master Bath/ we dnitg ® B MLV Dimmed 50W 2 100 W 138 No LT -1.1 / Master Bath / s vanity sconces ® ID5 INC Dimmed 120 W 2 240 W 139 No LT -1.1 / Master Bath / w vanity sconces ® ID5 INC Dimmed 120 W 2 240 W 140 No LT -1.1 /Storage/ recessed 1x1 ® F1 NonDim 18 W 2 36 W 201 No LT -1.2 / Bath 1 / general dnitg ® B MLV Dimmed 50W 2 100 W 202 No LT -1.2 / Bath 1 / vanity sconces ® ID10 INC Dimmed 120 W 3 360 W 203 No LT -1.2 / Bath 1 / we pendant ® ID13 INC Dimmed 240 W 1 240 W 204 No LT -1.2 / Bath 1 / shower Itg ® C2 MLV Dimmed low 2 20W 205 No LT -1.2 / Bed 1 / general dnitg ® B MLV Dimmed 50W 5 250 W 206 No LT -1.2 / Bed 1 / crib dnitg ® B MLV Dimmed 50W 2 100 W 207 No LT -1.2 / Bed 1 / n bunk Itg ® LT NonDim 36W 1 36 W 208 No LT -1.2 / Bed 1 / table Itg ® LT NonDim 36W 1 36 W 4/7/2010 9:51:10 AM F: \PROJECTS \Mosaic Arch itects\Angelo Condo \Control \10 -0405 grand annex.HDF Load Schedule Report Circuit # Feed AFCI Area / Room / Zone Name Fixture Load Type Fixture Total Load (W) (W) (Qty) 209 No LT -1.2 / Bed 1 / s bunk Itg ® LT NonDim 36 W 1 36W 210 No LT -1.2 / Bed 1 / floating tv shelf R MLV Dimmed 3 W 16 48W 211 No LT-1.21 Bed 1 / table lamp TL NonDim 180 W 1 180 W 212 No LT -1.2 / Bed 1 / future closet shelf lighting Junction Box INC Dimmed 150 W 1 150 W 213 No LT -1.2 / Bed 2 / general dnitg ® B MLV Dimmed 50 W 9 450 W 214 No LT -1.2 / Bed 2 / uplight K MLV Dimmed 6 W 14 84W 215 No LT -1.2 / Bed 2 / future closet lighting Junction Box INC Dimmed 150 W 3 450 W 216 No LT -1.2 / Bath 2 / general dnitg ® B MLV Dimmed 50 W 2 100w 217 No LT -1.2 / Bath 2 / shower Itg ® C2 MLV Dimmed low 2 20W 218 No LT -1.2 / Bath 2 / vanity sconces ® ID8 INC Dimmed 120 W 3 360 W 219 No LT -1.2 / Bath 2 / we dnitg ® B MLV Dimmed 50 W 2 100w 220 No LT -1.2 / Laundry / recessed lighting ® F1 NonDim 18W 2 36 W 221 No LT -1.2 / Hall / general dlntg ® B MLV Dimmed 50 W 8 400 W 222 No LT -1.2 / Hall / pendants ID9 INC Dimmed 120 W 4 480 W 223 No LT -1.2 / Hall / door sconce ® ID10 INC Dimmed 120 W 1 120 W 224 No LT -1.2 / Hall / cove ® K MLV Dimmed 6 W 20 120 W 225 No LT -1.2 / Hall / wall slot ® K1 MLV Dimmed 8 W 10 80 W 801 No LT -1.1 /Living Room/ deck sconces ® ID3 INC Dimmed 129 W 2 240 W 802 No LT -1.1 /Master Bedroom/ deck sconces ® ID12 INC Dimmed 1129 W 1 120 W 803 No LT -1.1 / Master Bedroom / deck fp ignitor 0 FP ignitor RLY 1150 W 1 150 W 4/7/2010 9:51:10 AM F: \PROJECTS \Mosaic Arch itects\Ange I o Condo \Control \10 -0405 grand annex.HDF n 2009 IECC - Chapter 4 Compliance Residential Residence: GRAND ANNEX Date: 4/8/2010 Submittal: PERMIT RESUBMITTAL 2 High Efficacy Definition: Less than 15W - Greater than or equal to 40 Lumens/Watt 15W to 40W - Greater than or equal to 50 Lumens /Watt Greater than 40W - Greater than or equal to 60 Lumens /Watt ROBERT SINGER ASSOCIATES INC. DESIGN CONSULTANTS LIGHTING SPECIALISTS po box 8929 aspen—co 81621 T 970_963_5692 Efficacy High Low Number of Wattage Fixture .- [Lumens Lamps /Lamp /Watt] Lamps Lamps B 82 50 1250 25 - 82 C 3 50 1250 25 - 3 C2 4 10 140 14 - 4 D (9.25in) 1 5.5 150 27 - 1 D (39.25in) 1 20 524 26 - 1 F1 4 18 1130 63 4 - K 240 0.71 36 51 240 - K1 (37in) 3 26 1641 63 3 - M 2 50 1250 25 - 2 R (12in) 23 1.52 143 94 23 - TA 6 50 1250 25 - :6 U 9 5.5 350 64 9 - Decorative 46 60 870 15 - 46 Totals 279 145 Pass High Efficacy Definition: Less than 15W - Greater than or equal to 40 Lumens/Watt 15W to 40W - Greater than or equal to 50 Lumens /Watt Greater than 40W - Greater than or equal to 60 Lumens /Watt ROBERT SINGER ASSOCIATES INC. DESIGN CONSULTANTS LIGHTING SPECIALISTS po box 8929 aspen—co 81621 T 970_963_5692 GEORGE SHAEFFER CONSTRUCTION COMPANY Post Office Box 373 Vail, Colorado 81658 (970) 845 -5656 April 15, 2010 Mike McGee Vail Fire Department 42 West Meadow Drive Vail, Colorado RE: B 10 -0017 Angelo Grand Annex Remodel Crane Use Dear Mike, Please find enclosed information as requested in regards to our proposed crane use for the Angelo Grand Annex remodel located in the Vail Mountain Lodge at 352 East Meadow Drive in Vail. We have included a copy of the letter from the Vail Mountain Lodge approving our proposed crane use times for the hours from 10 am to 3 pm from May 3rd through May 14`h 2010. In addition we have included a copy of the crane specifications, a copy of our crane operators "Pre- planning of Overhead Hoisting Operations" per OSHA requirements, our crane swing path plan and our traffic control plan. Based on OSHA requirements all employees will be kept clear of loads to be lifted as well as suspended loads. George Shaeffer Construction Company will provide personal and training to ensure no workers are exposed to these overhead loads. If you have any questions, please give us a call. Sincerely, GEORGE SHAEFFER CONSTRUCTION COMPANY Steve Hooker Project Manager ts.. Dennis Thompson Project Supervisor MYERS'e, COMPA AQCHrfECt1 R.AL. NEETAL8 lobsite Name and Location: Angelo Remodel, Vail, CO General Contractor: George Shaeffer Construction Company Myers & Company Project Manager. Andy Collis Planned Crane: 75TonTadano ATF656 -4 Crane Swing Path Protection Area: Per OSHA §1926.759 (b), the controlling contractor shall bar other construction processes below steel erection unless overhead protection for the employees below is provided_ The controlling contractor shall bar the entrance of any employee into the designated crane swing path area, as depicted on sheet no. A1.0, hereto attached, via appropriate barricading devices, as determined by the controlling contractor, where sufficient overhead protection cannot be provided to prevent injury from falling objects or from mechanical failure. The area to be barricaded off, as shown by hash marks on the attached drawing, extends from the following points: 1) Northwest corner of the Myers & Company delivery truck south to the northeast corner of the structure being remodeled. 2) Southwest corner of the Myers & Company crane south to the southwest corner of the jobsite, just north of the Worker Foot Access area. The crane swing path location is subject to change should any of the following change: 0 Current site condition /configuration as depicted on Sheet A1.0, attached • Crane capacity requirement • Major Deliveries location shift due to bus lane obstruction Additional Criteria: Myers & Company employees involved in primary connecting activities will be allowed within the designated crane swing path /work area. Myers & Company employees are trained in steel erection, particularly the area of connecting, and minimizing exposure time under raised loads. Only Myers & Company employees trained in good rigging practices shall rig steel to be raised aloft. Taglines shall be used on all objects raised aloft, aside from when the tagline itself poses a greater safety hazard to those connecting or others involved with the erection of steel. All items not in use while aloft shall be secured to prevent accidental displacement This site plan is not intended to constitute the whole of the Myers & Company Safety Plan, principally that of the Crane Rules and Regulations, nor does it replace the Myers & Company Safety Plan. This site plan is to act as a notice of area to be designated as Crane Swing Path /Steel Erection Work Area only. For further information, please refer to the Myers & Company Safety Handbook. Al PO, Box 2570 • 555 Basalt Ave • Basalt. CO 8166621 ' Phone 970.927.4761 ' Fax 970.927.4610 w,.n,v mversandco.com • www ironart com C, ran e 5 w• vi17- on M6.55-0 (0,)M) A/o0h Wt 130041 �%$t ry 'wM�uc rUrlp I.yM 9 1`tt el DRIVE 1 Wf TOWN Of V OPENSPAC M j1�rlli f - -► , , , N, /A VNQIyYN rlw ® ":SC'llsl am H. mosaic w1/wM .4"M i yN'I�C anlN'i0 IrI�4r �1 t hYrO�a f10 "11. r rinN I MII YY W.MIIILI(l.tl 4111n. F..1 N. FI ..AIM .NI I If.INI IMrMw.lr Z J o W Z 0 $ C) 0� /< w Lu V i VMt SITE PLAN a CONSIRUCTION STAGING MAN mid rI. WWI Yylrre .ICI I..w rr CC. -ft ..d YwM.r NIU DIr �.Iwr.+ A1.0! March 10, 2010 To Whom It May Concern: This letter will confirm that I have met with George Shaeffer Construction Company, the General Contractor for the Antelo Grand Annex unit remodel here at the Vail Mountain Lodge and Spa. I have reviewed and approved the proposed construction staging plan for this project. Our agreement is that during the proposed time of crane operation, beginning May 3rd through May 14`h, between the hours of 10 am and 3 pm, the lodge will be unoccupied WEST of gridline 6 (as indicated on the plan) on all levels, including the garage and health club facility. There are two privately owned units within this area, the Lubin Residence and the Angelo's Charlie's Annex unit, both of which will be unoccupied during this time. The GC has agreed to provide barricades and personnel to keep anyone from entering this area, to maintain fire escape access on the west end of our building, as well as for the adjacent Mountain Haus building. If you have questions, please do not hesitate to contact me at 970.477.3240. Sind rely, Frank W. Johnso General Managef 352 East Meadow Drive Vail, CO 81657 Hotel (970) 476 -0700 • Spa (970) 476 -7721 • Fax (970) 476 -6451 GEORGE SHAEFFER CONSTRUCTION CRANE WORK ONE LANE TRAFFIC w /FLAGGERS 352 E, MEADOWS DR. VAIL, CO, MUTCD TA -10 & 13 3 -10 -10 E. MEADOW DR. N 100 FT. NI W E 100 FT - S 100 FT 100 FT. - 50 FT. ---------------------------------------- 50 FT. 100 FT. 100 FT. 100 FT 100 FT. PREPARED BY TRAFFIC CONTROL SUPERVISOR; &a ?&"a" 3 -10 -10 APPROVED BY DATE CONTRACTOR; APPROVED BY DATE TOWN OF; DATE \\50 FT. \ 100 FT. \ \ \ L \\ 100 FT. 7 \ 100 FT. a� \ • \ O \ 100 FT. * ** *NOTE * * ** AMERICAN TRAFFIC SAFETY \I/ A -1 TRAFFIC CONTROL \I/ XX -WORK AREA w0w SERVICSSASSOCIATION & BARRICADE INC. — — p� (�OV j'*.1 - * * Wit 10119 IATI LIYtt affirm % � P o NOT TO SCALE* is to rrm that 32597 HWY 6 & 24 C, C �: M. Cal Whitman SILT, CO 81652 o`A, a SIGN SPACING has satisfied the requirements En r/ (970)876-0738 office � v f' Ao MEASUREMENTS to bedeslgaatedasa calve @al)haHlccontrol.com SAFEA BIADS SAVE !IVES a� �iC�o yam" CER7 [FTEll7RAPF[C CONTROL SlJPCItVISOR -AM BBB. `S `y ARE AT SET MINIMUM issue a ACCHDIDED - -. ww*IU STANDARDS EKpink ion Dam:}/ W2012 C trUlication HLwcd bbb.oF, A -1 TRAFFIC CONTROL & BARRICADE INC. 32597 HWY 6 & 24 SILT, CO. 970 -876 -0738 office 970 - 876 -0307 fax calw(cDa1 trafficcontrol.com Method of Handling Traffic General The key elements of Contractor's Method of Handling Traffic ( MHT ) are outlined in subsection 630.08, 630.09 & 630.10 of the Standard Specifications for Road & Bridge Construction Book (Colorado Dept. of Transportation) and The Manual on Uniform Traffic Control Devices (MUTCD) (US Dept. of Transportation, Federal Highway Administration). The Components of the Traffic Control Plan (TCP) for this project are included in the following: (1) Subsection 104.04 and Section 630 of the Specifications. (2) Schedule of Construction Traffic Control Devices. (3) Standard Plan S- 630 -1, Traffic Controls for Highway Construction Plan S- 630 -2. (4) Manual on Uniform traffic Control Devices. Special Traffic Control Plan requirements for this project are as follows: The Contractors work shall be restricted to daylight hours Portable Construction Signs shall be removed or turned at the end of each day's work. With the exception of Road Work Ahead or Utility Work Ahead. Barricades such as Type I or Type II shall delineate any hazard areas within the work area. Flagging: Section 630 -12 Traffic Control Supervisor: Section 630 -10 Illustration of the vehicle Illustration of the vehicle I A-4 "'L a # '10 0"0 JD A I I h U.S 6dr 077.2 '78051 0G1fi-US.FAO11_A�04_W_00 2031.05 07 TADANO Length data are spedfiprl In inch them) IA I C ;j R 4 (ITS [Rt -1 A I I h U.S 6dr 077.2 '78051 0G1fi-US.FAO11_A�04_W_00 2031.05 07 TADANO Length data are spedfiprl In inch them) GEORGE SHAEFFER Post Office Box 373 Vail, Colorado 81658 (970) 845 -5656 April 15, 2010 Martin A Haeberle, C.B.O. Chief Building Official Town of Vail 75 South Frontage Road Vail, Colorado 81657 RE: B 10 -0017 Angelo Grand Annex Remodel Dear Martin, In response to your email dated 4/15/10 in regards to the Angelo Grand Annex Remodel in the Vail Mountain Lodge at 352 East Meadow Drive in Vail we have addressed the following items. 1) We have revised and enclosed our site plan to minimize the impact to the Town of Vail owned Stream Tract and feel that it should be within reason. 2) We propose the removal of, and agree to replace the trees indicated on the plan which are all located on the Vail Mountain Lodge property. We agree to relandscape this area and return it to a better state than it currently is. 3) The trees located on the Town of Vail property will be protected via the construction fence which will keep all workers from these trees. Hay bales and additional protection could be included if necessary. 4) Enclosed is a package that addresses the Fire Departments concern with the crane use. Once the Fire Department approves the plan a revised Public Right of Way application will be submitted immediately to the Vail Public Works Department for review. 5) In response to your question, yes exit paths to the public way will be maintained for both the Vail Mountain Lodge and the Mountain House as indicated on the enclosed plan. If you have any questions, please give us a call. Sincerely, GEORGE SHAEFFER CONSTRUCTION COMPANY Steve Hooker Project Manager a�'� Dennis Thomp Project Supervisor 03 -23 -2011 Inspection Request Reporting Page 1 4'42 pm Vail, CO - City Of A/P /D Informal Activity: Const Type: Owner: Contractor: Description: Requested Inspect Date: Thursday, March 24, 2011 Inspection Area: JRM Site Address: 352 E MEADOW DR VAIL UNIT 303, VAIL MOUNTAIN LODGE :ion B10 -0017 Occu Type: A -MF pc�yy ANGELO, JOHN M. & JUDITH an N. : GEORGE SHAEFFER CONSTRUCTION ADDITION & REMODEL Reauested Insoectionts Item: 70 BLDG -Misc. Requestor: GEORGE SHAEFFER CONSTRUCTION Comments: FIREPLACE FINAL 390 -6318 Assigned To: JMONDRAGON Action: Time Exp: ke(L.o �l it p Sub Type: AMF Use: IIA Phone: 845 -5656 Status: ISSUED Insp Area: JRM Requested Time: 09:30 AM Phone: 970 - 845 -5656 Entered By: JMONDRAGON K Inspection History 05/27/10 Comment: Item: 410 Special Inspect- progress rept 08/18/10 Comment: Inspector: mdenney Action: PI PARTIAL INSPECTION framing for mech platform above master bdrm and ceiling framing in master bdrm. Item: 30 BLDG - Framing ** Approved ** 05/20/10 Inspector: Martin Action: PA PARTIAL APPROVAL Comment: Exterior walls and roof decking pendingg approved special inspection agency 09/09/10 Inspector: Martin Action: PA PARTIAL APPROVAL Comment: Except west wall at stair. Provide fire rating of stone wall 09/23/10 Inspector: Martin Action: AP APPROVED Comment: Base on clarification of walls Item: 50 BLDG - Insulation REPT131 Run Id: 12841 05/27/10 Comment: Inspector- cg Action: PI PARTIAL INSPECTION FIREPLACE CHIMNEY SHAFT 09/20/10 Inspector: MDENNEY Action: CR CORRECTION REQUIRED Comment: MASTER BEDROOM - PELLA WINDOWS INSTALLED ARE U -0.37 VALUE. MAINTAIN 1 HR RATING BEHING MEDICINE CABINETS ON EAST SIDE OF UNIT IN 1HR RATED WALL ASSEMBLY. Item: 60 BLDG - Sheetrock Nail ** Approved ** 05/27/10 Inspector: cg Action: PA PARTIAL APPROVAL Comment: EXTERIOR DENS GLASS ONLY 06/02/10 Inspector: CG Action: PI PARTIAL INSPECTION Comment: FIREPLACE CHIMNEY CHASE ONLY 09/29/10 Inspector: JRM Action: PI PARTIAL INSPECTION Comment: APPROVED UPPER LEVEL ONLY BOTH MECH LOFT AREAS AND MEDICINE CABINET AREAS (QUIET ROCK) 10/06/10 Inspector: JRM Action: PI PARTIAL INSPECTION Comment: ALL APPROVED EXCEPT FOR KITCHEN AREA Item: 70 BLDG -Misc. Item: 420 Special Inspect -final rept ** Approved ** 05/20/10 Inspector: Martin Action: DN DENIED Comment: Proivde approved special inspection 06/10/10 Inspector: JRM Action: AP APPROVED Comment: approved welding and bolting special inspections , certificate of compliance approved Item: 90 BLDG -Final ** Approved ** 03/16/11 Inspector: sgremmer Action: PA PARTIAL APPROVAL REPT131 Run Id: 12841 06 -16 -2011 Inspection Request Reporting Page 1 4:08 pm Vail, CO - City Of Requested Inspect Date Inspection Area Site Address A /P /D Information Activity: B10 -0017 Type: A -MF Const Type: Occupancy: Owner: ANGELO. JOHN M. & JUDITH H. Contractor: GEORGE SHAEFFER CONSTRUCTION Description: ADDITION & REMODEL Requested Inspection(s) Friday, June 17, 2011 JRM 352 E MEADOW DR VAIL UNIT 303, VAIL MOUNTAIN LODGE Item: 90 BLDG -Final Requestor: GEORGE SHAEFFER CONSTRUCTION Comments: 390 -6318 Assigned To: JMONDRAGON Action: Time Exp: Comment: annin an ire department needs to be signed off Comment: All building elements are completed fire and plannin Sub Type: AMF Use: IIA g Phone: 845 -5656 Status: ISSUED Insp Area: JRM Requested Time: 10:00 AM Phone: 970 - 845 -5656 Entered By: JMONDRAGON K as well as the mechanical permit for the fireplaces need to sign off Inspection History Item: 410 Special Inspect- progress rept Inspector: Action: PI PARTIAL INSPECTION 08/18/10 Comment: mdenney framing for mech platform above master bdrm and ceiling framing in master bdrm. Item: 30 BLDG - Framing ** Approved ** 05/20/10 Inspector: Martin Action: PA PARTIAL APPROVAL Comment: Exterior walls and roof decking pending approved special inspection agency 09/09/10 Inspector: Martin Action: PA PARTIAL APPROVAL Comment: Except west wall at stair. Provide fire rating of stone wall 09/23/10 Inspector: Martin Action: AP APPROVED Comment: Base on clarification of walls Item: 50 BLDG - Insulation 05/27/10 Inspector: cg Action: PI PARTIAL INSPECTION Comment: FIREPLACE CHIMNEY SHAFT 09/20/10 Inspector: MDENNEY Action: CR CORRECTION REQUIRED Comment: MASTER BEDROOM - PELLA WINDOWS INSTALLED ARE U -0.37 VALUE. MAINTAIN 1HR RATING BEHING MEDICINE CABINETS ON EAST SIDE OF UNIT IN 1 HR RATED WALL ASSEMBLY. Item: 60 BLDG - Sheetrock Nail ** Approved ** 05/27/10 Inspector: cg Action: PA PARTIAL APPROVAL Comment: EXTERIOR DFNS GLASS ONLY 06/02/10 Inspector: CG Action: PI PARTIAL INSPECTION Comment: FIREPLACE CHIMNEY CHASE ONLY 09/29/10 Inspector: JRM Action: PI PARTIAL INSPECTION Comment: APPROVED UPPER LEVEL ONLY BOTH MECH LOFT AREAS AND MEDICINE CABINET AREAS (QUIET ROCK) 10/06/10 Inspector: JRM Action: PI PARTIAL INSPECTION Comment: ALL APPROVED EXCEPT FOR KITCHEN AREA Item: 420 Special Inspect -final rept ** Approved ** 05/20/10 Inspector: Martin Action: DN DENIED Comment: Proivde approved special inspection 06/10/10 Inspector: JRM Action: AP APPROVED Comment: approved welding and bolting special inspections , certificate of compliance approved Item: 90 BLDG -Final ** Approved ** 03/16/11 Inspector: sgremmer Action: PA PARTIAL APPROVAL REPT131 Run Id: 13202