HomeMy WebLinkAboutDRB100272Department of Community Development
75 South Frontage Road
Vail, .Colorado- 81651
Tel:. 970 -479 -2128.
Fax: 970 =479 -2452
Web:
www.vailgov.com
opment Review Coordinator
k
Application for Design Review
Minor Exterior Alteration
General Information: This application is required for all proposals involving minor changes to buildings and site im-
provements, such as roofing, painting, window additions, landscaping, fences, retaining walls, etc. Applicable Vail
Town Code sections can be found at www.vailgov.com under Vail Information — Town Code Online. All projects re-
quiring design review must receive approval prior to submitting a building permit application. An application for Design
Review cannot be accepted until all required information is received by the t ment, as
outlined in the submittal requirements. The project may also need to be revi L t _ ci "fin the Plan-
ning and Environmental Commission. Design review approval expires one from the date of appro unless a
building permit is issued and construction commences. JUL O 2 2010
Fee: $250 for Multi - Family /Commercial
$20 for Single Family /Duplex
V Single Family
Duplex Multi -Fam TOW OF V.
Description of the Request: The replacement of 4 windows in unit. To match exsisting and complex requirements.
Pella Arch Series. Brown Exterior Clad.
Physical Address: 4800 Meadow Dr. #10. V a i l CO 8
Parcel Number: 2401 442 3 W 0 2 1011 24 Z 30 t Q (Contact Eagle Co. Assessor at 970- 328 -8640 for parcel no.)
Property Owner: J. G i bs on Mc Illvain
Mailing Address: Route 7, P Box 222 White Marsh MD 21162
Owner's Signature:
Primary Contact/ Owner Representative:
Mailing Address:
Ankerholz Inc. (Matt or Steve)
PO BOX 296 Avon CO 81620
E -Mail: ankerholzinc @yahoo.com
For Office Use Only: Cash_ CC: Visa / MC Last 4 CC #
Fee Paid:
Meeting Date:
Planner:
Zoning:
Auth # Check #
Received From:
DRB No.:
Project No:
Land Use:
Location of the Proposal: Lot: Block: Subdivision: : , � tA-��
Phone: 443 - 625 -88
Phone: 9 9 4 9 -63 41 (M or Steve)
Fax: 97 0- 949 -6341
01- Jan -10
TOWN O VY '
JOINT PROPERTY OWNER
WRITTEN APPROVAL LETTER
This form is applicable to all Design Review applicants that share ownership of the subject property. For exam-
ple, the subject property where construction is occurring is a duplex, condominium or multi- tenant building. This
form shall be completed by the applicant's neighbor/ joint property owner. In the case of a multiple - family dwell-
ing or multi- tenant building, the authority of the association shall complete this form and mail to: Community
Development Department, 75 South Frontage Road, Vail, CO 81657 or fax to 970.479.2452.
I, (print name) Steve Ank , a joint owner, or authority of the association, of property
located at 4800 Meado D r i v e ( Riv e r be nd a t Vail HOA) , provide this letter as
written approval of the plans dated
which have been submitted to the
Town of Vail Community Development Department for the proposed improvements to be completed at the ad-
dress noted above. I understand that the proposed improvements include:
Changing windows as noted. Four windows total
D
( gnature)
(Date)
Additionally, please check the statement below which is most applicable to you:
I understand that minor modifications may be made to the plans over the course of the review process to en-
sure compliance with the Town's applicable codes and regulations.
(Initial here)
o I request that all modifications, minor or otherwise, which are made to the plans over the course of the re-
view process, be brought to my attention by the applicant for additional approval before undergoing further re-
view by the Town.
(Initial here)
fAcdev \forms \permits \Planning \DRB \DRB_Minor Exterior Alteration_010110
1
PROPOSED MATERIALS
Building Materials Type of Material
Roof
Siding
Other Wall Materials
Fascia
svffitr-
� oo �
Windows
Window Trim
Doors
Door Trim
Hand or Deck Rails
Flues
Flashing
Chimneys
Trash Enclosures
Greenhouses
Retaining Walls
Exterior Lighting
Other
Color
to "44
Notes:
Please specify the manufacturer's name, the color name and number and attach a color chip.
ARCHITECT SERIES'
CASEMENT Architect Series® Clad
Glazing Performance
Total Unit
Meets U.S.
o U o ENERGY STAR"
Type of Glazing LL Canada
= Performance ENERGY STAR
Ln > Criteria in Region
Shown,
11/16" clear IG with 3 mm glass
0.45
0.54
56
with grilles - between- the -glass
0.45
0.49
51
with integral grilles
0.45
0.49
51
11/16' Advanced Low -E IG with argon with 3 mm glass
0.30
0.26
48
with grilles - between- the -glass
0.30
0.24
43
with integral grilles
0.30
0.24
43
11/16" NaturalSun Low -E IG with argon with 3 mm glass
0.32
0.48
54
with grilles - between - the -glass
0.32
0.44
49
with integral grilles
0.32
0.44
49
11/16" SunDefenserm Low -E IG with argon with 3 mm glass
0.29
0.18
44
with grilles- between- the -glass
0.29
0.18
40
with integral grilles
0.30
0.18
40
11/16" SunDefenseTm Dual Low -E IG with argon with 3 mm glass
0.26
0.18
40
with grilles- between- the -glass
0.26
0.17
37
with inteqral qrilles
0.27
0.17
37
11/16" Bronze Advanced Low -E IG with 5 mm /3 mm Low -E
0.30
0.23
31
with grilles - between - the -glass
0.31
0.21
28
with integral grilles
0.31
0.21
28
11/16" Gray Advanced Low -E IG with 5 mm /3 mm Low -E
0.33
011
27
with grilles - between- the -glass
0.34
0.19
24
with integral grilles
0.35
0.19
24
11/16" Green Advanced Low -E IG with 5 mm /3 mm Low -E
0.30
0.22
38
with grilles- between - the -glass
0.31
0.21
34
with integral grilles
0.31
0.21
34
11/16" Advanced Low -E HA IG with 3 mm glass
0.33
0.26
48
with grilles - between - the -glass
0.33
0.24
43
with integral grilles
0.34
0.24
43
11/16' NaturalSun Low -E HA IG with 3 mm glass
0.35
0.48
54
with grilles - between- the -glass
0.35
0.44
49
with integral grilles
0.36
0.44
49
11/16" SunDefenseTm Low -E HA IG with 3 mm glass
0.33
0.20
44
with grilles- between- the -glass
0.33
0.18
40
with integral grilles
0.33
0.18
40
11/16' SunDefenserm Dual Low -E HA IG with 3 mm glass
0.28
0 -18
40
with grilles- between- the -glass
0.28
0.17
37
with integral grilles
0.29
0.17
37
(1) Glazing performance values are calculated based on NFRC 100.
(2) Climate Zones: N = Northern, NC = North /Central, SC = South /Central,
S = Southern. For more information, see the ENERGY STAR guidelines.
For center -glass values, see the Product Performance section in Volume 1.
R -Value = 1/U -Factor
i
Rev. 05131/2010 Pella 2010 Architectural Design Manual • Division 08 - Openings • Windows and Doors • www.PellaADM.com 3-6
��mcw Architect Series' Clad - Fixed
Glazing Performance
Total Unit E]
Meets U.S.
r U o ENERGY STAR` Canada'i
Type of Glazing ti = J Performance ENERGY STAR
to > Criteria in Region
Shown
(1) Glazing performance values are calculated based on NFRC 100.
(2) Climate Zones: N = Northern, NC = North /Central, SC = South /Central,
S = Southern. For more information, see the ENERGY STAR guidelines.
For center -glass values, see the Product Performance section in Volume 1.
R -Value = 1 /U- Factor
.3
I
Rev. 0513112010 Pella 2010 Architectural Design Manual • Division 08- Openings • Windows and Doors • www.Pella ADM_ com 3 -7
11/16" clear IG with 3 mm glass
with grilles - between- the -glass
with integral grilles
11/16" Advanced Low -E IG with argon with 3 mm glass
with grilles - between- the -glass
with integral grilles
11/16" NaturalSun Low -E IG with argon with 3 mm glass
with grilles - between- the -glass
with integral grilles
11/16" SunDefenseT°" Low -E IG with argon with 3 mm glass
with grilles- between- the -glass
with integral grilles
11/16" SunDefense'" Dual Low -E IG with argon with 3 mm glass
with grilles - between- the -glass
with integral grilles
0.46
0.46
0.46
0.28
0.28
0.29
0.30
0.30
0.31
0.27
0.27
0.28
0.24
0.24
0.24
0.62
0.56
0.56
0.30
0.27
0.27
0.56
0.50
0.50
0.22
0.20
0.20
0.21
0.19
0.19
65
58
58
56
50
50
63
56
56
51
46
46
47
42
42
11/16" Bronze Advanced Low -E IG with 5 mm /3 mm Low -E
with grilles - between- the -glass
with integral grilles
11/16" Gray Advanced Low -E IG with 5 mm /3 mm Low -E
with grilles- between - the -glass
with integral grilles
11 /16" Green Advanced Low -E IG with 5 mm /3 mm Low -E
with grilles - between- the -glass
with integral grilles
0.29
0.30
0.30
0.29
0.30
0.30
0.29
0.30
0.30
0.26
0.24
0.24
0.24
0.22
0.22
0.26
0.23
0.23
36
32
32
31
28
28
44
39
39
11/16" Advanced Low -E HA IG with 3 mm glass
with grilles - between- the -glass
with integral grilles
11/16" NaturalSun Low -E HA IG with 3 mm glass
with grilles- between- the -glass
with integral grilles
11/16" SunDefenseT" Low -E HA IG with 3 mm glass
with grilles - between- the -glass
with integral grilles
11/16" SunDefenseT"" Dual Low -E HA IG with 3 mm glass
with grilles - between- the -glass
with integral grilles
0.33
0.35
0.34
0.34
0.34
0.35
0.33
0.34
0.34
0.28
0.29
0.28
0.30
0.27
0.27
0.56
0.50
0.50
0.23
0.21
0.21
0.21
0.19
0.19
55
49
49
63
56
56
51
46
46
46
41
41
(1) Glazing performance values are calculated based on NFRC 100.
(2) Climate Zones: N = Northern, NC = North /Central, SC = South /Central,
S = Southern. For more information, see the ENERGY STAR guidelines.
For center -glass values, see the Product Performance section in Volume 1.
R -Value = 1 /U- Factor
.3
I
Rev. 0513112010 Pella 2010 Architectural Design Manual • Division 08- Openings • Windows and Doors • www.Pella ADM_ com 3 -7
Pella Architect Series® Casement
Aluminum EnduraClad* Exterior
Detailed Product Descriptions
Frame
• Select woods, water - repellent, preservative - treated with EnduraGuard® in accordance with WDMA I.S.4. EnduraGuard includes water - repellency,
three active fungicides and an insecticide applied to the frame.
• Interior exposed surfaces are [Pine] [Mahogany] [Alder] [Douglas Fir] (standard rectangular units only). Any curved member may have visible finger -
jointed surfaces.
• Exterior surfaces are clad with aluminum.
• Overall frame depth is 5" (127 mm) for a wall depth of 3- 11/16" (94 mm).
• Optional factory- applied jamb extensions available between 4- 9/16" (116 mm) and 7 -3/16" (183 mm) wall depths.
Sash
• Select woods, water - repellent, preservative- treated with EnduraGuard in accordance with WDMA I.S.4. EnduraGuard includes water - repellency,
three active fungicides and an insecticide applied to the sash.
• Interior exposed surfaces are clear [Pine] [Mahogany] [Alder] [Douglas Fir] (standard rectangular units only). Any curved member may have visible
finger- jointed surfaces.
• Exterior surfaces are clad with aluminum, lap- jointed and sealed.
• Comers mortised and tenoned, glued and secured with metal fasteners.
• Sash thickness is [1- 13/16" (46 mm) for 11/16 "] [1- 11/16" (43 mm) for 9/16 "] [2 -1/8" (54 mm) for 1 "] glazings.
Weather Stripping
• Dual weather stripping.
• Flexible santoprene material compressed between frame and sash for positive seal on all four sides.
• Secondary polyvinyl chloride leaf -type weather strip between edge of sash and frame.
Glazing System,
• Quality float glass complying with ASTM C 1036.
• Silicone -glazed 11/16" dual -seal insulating glass [[annealed] [tempered]] [[clear] [Advanced Low -E coated with argon] [NaturalSun Low -E coated
with argon] [SunDefenseTM [dual] Low -E with Argon] [[bronze] [gray] [green] air -filled Advanced Low -E coated]].
• Custom and high altitude [with Argon] glazing available for 11/16" glazing only.
— or —
• Impact- Resistant
• Silicone - glazed 1" dual -seal impact- resistant insulating glassl [PVB] [SGP]. [[Tempered] [Annealed]] exterior light is [[Advanced Low -E coated with
argon] [clear] [bronze] [gray] [green]]. Laminated clear interior light.
—or—
• Silicone - glazed 11/16" dual -seal impact- resistant insulating glassl [PVB]. [[Tempered] [Annealed]] exterior light is [[Advanced Low -E coated with
argon] [clear]]. Laminated [clear] interior light, or [[tempered] [annealed]] exterior light is [[Advanced Low -E coated with argon][clear]]. Laminated
[[bronze] [gray] [green]] interior light.
—or—
■ Silicone - glazed 9116" [PVB] laminated glass [[clear] [bronze] [gray] [green]].
— or —
• Silicone - glazed 9/16" [SGP] laminated glass [[clear] [multi -layer Low -E] [bronze] [gray] [green]].
Exterior
• Exterior aluminum surfaces are finished with EnduraClad" multi -stage finish system.
• Color is [white] [tan] [brown] [feature [ cust0m 2 ].
—or —
• Exterior aluminum surfaces are finished with EnduraClad Plus 70% fluoropolymer -based multi -stage finish system.
• Color is [white] [tan] [brown] [feature [ custom 2 ].
Interior
• [Unfinished, ready for site finishing] [Primed with one coat acrylic latex] [Pine: [prefinished white] [prefinished stain
Hardware
• Roto operator assembly
• Steel worm gear sash operator with hardened gears.
• Operator base is zinc die cast with painted finish.
• Operator linkage, hinge slide, and hinge arms are 300 series stainless steel.
• Exposed fasteners are stainless steel.
• Hardware shall exceed 1,000 hours salt spray exposure per ASTM B 117.
• Finish of integrated folding crank is [baked enamel, champagne] [baked enamel, white] [baked enamel, brown] [bright brass] [satin nickel] [oil -
rubbed bronze]. All vent units are available with left- or right -hand hinging.
• SureLoc0 System --A single handle locking system operates positive- acting arms that reach out and pull the sash into a locked position: one
installed on units 29" and smaller frame height, two unison operating locks installed on units over 29" frame height.
• Lock handle finish is [baked enamel, champagne] (baked enamel, white] [baked enamel, brown] [bright brass] [satin nickel] [oil- rubbed bronze].
• Optional limited opening hardware available for vent units in stainless steel; nominal 3" opening.
Optional Products
Grilles
• Integral Light Technology"
■ Grilles are solid [7/8'1 [1 -1141 [2 "] regular profile that are [Pine] [Mahogany] [Alder] [Douglas Fir].
•
Patterns are [Traditional] [Prairie] [Top Row) [Cross] [New England] [Victorian] [Simulated French].
■ Exterior surfaces are extruded aluminum to match window cladding.
■ Interior surfaces are [unfinished, ready for site finishing] [factory- primed] [Pine: [Factory prefinished white] [Factory prefinished stain2].
• Insulating glass contains non -glare spacer between two panes of glass. Non -glare spacer is adhered to the glass.
■ Bars are adhered to both sides of the insulating glass with VHB acrylic adhesive tape and aligned with the non -glare spacer.
— or —
• Grilles- Between- the -Glass 3
■ Insulating glass contains 3/4" contoured aluminum grilles permanently installed between two panes of glass.
•
Patterns are [Traditional] [Prairie] [Cross] [fop Row] [Custom — Equally Divided).
■ Interior color is [white) [tan4] [brown4) [ivory] [brickstone] [harvest] [cordovan).
• Exterior color is [white] [tan] [brown] [featured,
— or —
• Removable Grilles
• [[3/4 "] [1 -114 "] [2 ") Regular] [[1 -1/41 [2 "] Colonial] profile, with [Traditional] [Prairie] patterns that are removable solid pine wood bars steel - pinned
at joints and fitted to sash with steel clips and tacks.
• Interior [unfinished, ready for site finishing] [factory- primed] [Pine: [Factory prefinished white] [Factory prefinished staind.
• Exterior [unfinished, ready for site finishing] [factory- primed] [finish color matched to exterior cladding
Flat Insect Screen
• InViewTm Fiberglass
• Vinyl- coated 18/18 mesh fiberglass screen cloth complying with SMA 1201, set in aluminum frame fitted to inside of window, supplied complete
with all necessary hardware.
• Screen frame finish is baked enamel, [champagne] [white] [brown].
—or—
• Vivid View
• PVDF 21/17 mesh, minimum 78 percent light transmissivity screen, set in aluminum frame fitted to inside of window, supplied complete with all
necessary hardware.
• Screen frame finish is baked enamel, [champagne] [white] [brown].
—or—
• Rolscreen� Retractable (for rectangular units only)
• Self- storing, rolling, black vinyl - coated 18/16 mesh fiberglass screen cloth complying with ASTM D 3656 and SMA 1201 mounted behind
overhead cover.
• Cover finish is [Pine] [Mahogany] [Alder] [Douglas Fir] veneer wrapped over extruded aluminum.
• Guides are aluminum extrusion with [[Pine] [Mahogany] [Alder] [Douglas Fir] veneer] [factory Prefinished white].
(1) Insulating glass with argon is Low -E coated (except high altitude). All other insulating glass (including high altitude Low -E) is air - filled.
(2) Contact your local Pella sales representative for current color options.
(3) Available in clear or Low -E insulating glass only. White exterior grille color is the only option available for clear insulating glass.
(4) Tan and brown Interior GBG colors are available in single -tone (brown /brown or tan /tan). Other interior colors are also available with tan or brown
exterior.
(5) Appearance of exterior grille color will vary depending on Low -E coating on glass.
0
Architect Series@
Casement Window
With virtually unlimited exterior color choice, shapes and grille options,
Architect Series windows beautifully reflect your unique style.
Interior view
My Options
Hardware: Oil -Rubbed Bronze'
Interior Finish: Unfinished Pine
Exterior Finish:Brown lr_�
Glass Options:Advanced Low -E Insulating Glass with Argon
Exterior view
All Pella produm offer
energy efficient options
Energy Efficient
Easy to Clean
Low Maintenance
Extra Tight Seal
Integral Light Technology
Questions? Let us Help. Get in touch with a Pella expert 1- 800 - 374 -4758 1 webinfo @pella.com I Pella.com
Project Name:MCILVAIN WINDOW REPLACEMENTDRBNumber:DRB100272
Project Description:
REPLACE WINDOWS, SAME FOR SAME
Participants:
OWNER MCILVAIN, MARIAN ASHTON & J. 07/02/2010
1966 NEWARK RD
LINCOLN UNIVERISITY
PA 19352
APPLICANT ANKERHOLZ INCORPORATED 07/02/2010 Phone: 970-926-1490
PO BOX 296
AVON
CO 81620
License: 819-B
CONTRACTOR ANKERHOLZ INCORPORATED 07/02/2010 Phone: 970-926-1490
PO BOX 296
AVON
CO 81620
License: 819-B
Project Address:4800 MEADOW DR VAILLocation:
UNIT 10, RIVERBEND
Legal Description:Lot:10Block:Subdivision:RIVERBEND AT VAIL
Parcel Number:2101-124-2301-0
Comments:
BOARD/STAFF ACTION
Motion By:Action:STAFFAPP
Second By:
Vote:Date of Approval:07/12/2010
Conditions:
Cond: 8
(PLAN): No changes to these plans may be made without the written consent of Town of
Vail staff and/or the appropriate review committee(s).
Cond: 0
(PLAN): DRB approval does not constitute a permit for building. Please consult with
Town of Vail Building personnel prior to construction activities.
Cond: 201
(PLAN): DRB approval shall not become valid for 20 days following the date of
approval, pursuant to the Vail Town Code, Chapter 12-3-3: APPEALS.
Cond: 202
(PLAN): Approval of this project shall lapse and become void one (1) year following
the date of final approval, unless a building permit is issued and construction is
commenced and is diligently pursued toward completion.
Planner:RACHEL FRIEDEDRB Fee Paid: $0.00