HomeMy WebLinkAboutTemperature Sensor TE-6300 Series Temperature Sensors
Product Bulletin
LIT-216320
Issued March 13, 2009
Supersedes July 14, 2008
The TE-6300 Temperature Sensor line provides
economical solutions for a wide variety of temperature
sensing needs, including wall-mount, outdoor-air, duct,
� strap-mount, well-insertion, duct-averaging, and � �...
Variable Air Volume (VAV)flange-mount duct-probe .•' yJ
'�-" ����
applications. The TE-6300 line offers both a metal and � �±�� �
a plastic enclosure for the most popular models. „4i��••� ` �
�. ;�. �.
Sensors are available in the following types: ' � - � a{-_4. � ry��'j
�� - - "�:. _�.,
• 1 k ohm thin-film nickel �'`
• 1 k ohm nickel averaging
Figure 1: TE-6300 Series Temperature Sensors
• 1 k ohm thin-film platinum
• 100 ohm platinum equivalent averaging Each sensor is packaged with the necessary mounting
accessories to maximize ordering and installation ease
• 1 k ohm platinum equivalent averaging and reduce both commissioning time and cost.
• 2.2k (2,252) ohm thermistor
• 10k ohm thermistor, Johnson Controls0 Type II
Table 1: Features and Benefits
Features Benefits
Full Line of Versatile Sensors Supports all your temperature sensing needs from a single supplier:
wall-mount,outdoor-air,duct,duct-averaging,strap-mount,well-insertion,
and flange-mount duct-probe.
Single Assembly Ordering Simplifies ordering; provides a complete assembly in one box.
Models Featuring an Integral NPT Adaptor Increase sensor connection strength,which eliminates the need for a
special adaptor.
Models with a Stainless Steel Sensor Probe Protect the sensor while increasing corrosion resistance.
Metal Enclosure(TE-63xxM Models Only) Meets plenum requirements.
Models Featuring a Retainer for the Sensor Lock the sensor holder into the conduit box.
Holder
J� r
TE-6300 Series Temperature Sensors Product Bulletin 1
lohnson '�'}�,��
Can#rols
Product Overview • use the 1/2-14 NPT female thread to mount the
Outdoor Air models directly to ridged conduit
IMPORTANT: The TE-6300 Series Temperature .
Sensors are intended to provide an input to provide optional sensor holders (order separately)
equipment under normal operating conditions. to mount duct models in thermal wells
Where failure or malfunction of the TE-6300 sensor • offer an optional accessory metal cover kit (order
could lead to personal injury or property damage to separately)to replace the plastic cover to meet
the controlled equipment or other property, UL 1995 plenum use requirements
additional precautions must be designed into the . include a replaceable sensing probe on
control system. Incorporate and maintain other duct-probe, outdoor-air, and well-insertion models
devices such as supervisory or alarm systems or
safety or limit controls intended to warn of, or protect TE-63x4P Wall Mount Models
against, failure or malfunction of the The TE-63x4P (plastic enclosure) models:
TE-6300 sensor.
• come with a white thermoplastic ventilated cover
All TE-6300 Series sensors are two-wire, passive, with a brushed aluminum face plate and a steel
resistance-output devices. mounting plate for surface mounting
TE-63xxM Models • include faceplates for both horizontal and vertical
The TE-63xxM (metal enclosure) models: mounting
• come with a corrosion-protected steel enclosure ' offer an accessory mounting kit for mounting to a
with a 0.88 in. (22 mm) hole for a 1/2 in. (12.7 mm) standard electrical box
conduit fitting • offer optional covers
• include two hex-head self-drilling screws for TE-63xS Models
mounting the duct and duct averaging models The TE-63xS (Strap-Mount) models:
• offer(for well models only)either a direct-mount or . provide a 1/4 in. (6.35 mm)diameter stainless steel
1/2-14 NPT threaded well sensor holder for probe without an enclosure
mounting in TE-6300W Series thermal wells.
(Order the thermal well separately.) • include three cable ties for mounting to pipe up to
• provide optional well sensor holders (order 2-5/8 in. (67 mm) diameter
separately)to mount duct models in thermal wells • come equipped with a 10 ft (3 m) plenum rated
• meet UL 1995 plenum use requirements cable
• meet UL 1995 plenum use requirements
• offer optional accessory kit (order separately)to
replace plastic hole plug and wiring bushing to • offer an accessory mounting kit for mounting to a
meet International Mechanical Code (IMC) pipe up to 11 in. (280 mm) diameter
requirements TE-63xxV Models
TE-63xxP Models The TE-63xxV (VAV flange mount) models:
The TE-63xxP (plastic enclosure) models: • provide a stainless steel mounting flange with two
• provide a thermoplastic conduit box with hex-head self-drilling mounting screws
1/2-14 NPT female thread for connecting to conduit . come equipped with a 10 ft (3 m) plenum rated
• provide aluminum mounting plate and 1/2-14 NPT cable with 1/4 in. (6.35 mm)female insulated
threaded hub mounting options for the duct and quick-connect terminations on leads
duct-averaging models meet UL 1995 plenum use requirements
2 TE-6300 Series Temperature Sensors Product Bulletin
Additional Product Information Note: Figure 2 shows 1k ohm platinum sensor
See Figure 2 for nickel and platinum sensor characteristic. For 100 ohm platinum sensor
Resistance/Temperature (R/T) response characteristic, divide the resistance value by 10.
characteristics. See Table 2 for all sensor See Figure 3 for 2.2k and 10k ohm thermistor sensor
Temperature/Resistance values. R/T response characteristics.
1500
1400
i
i
i
1300 Platinum
£ 1200
t
� 1100
�
c
y 1000
.y
� 900 �
i
800
Nickel
700
600 �
-50 -20 10 40 70 100 130 160 190 220
(-46) (-29) (-12) (4) (21) (38) (54) (71) (88) (104)
Temperature,°F(°C)
Figure 2: Nickel and Platinum Temperature Response
1M
100k 10k ohm
N �
s 10k
0
ai
u
c
R
w
'� 1 k �
�
2.2k ohm�
100
10 =
-50 -20 10 40 70 100 123 160 190 220
(-46) (-29) (-12) (4) (21) (38) (54) (71) (88) (104)
Figure 3: Thermistor Sensor Response
TE-6300 Series Temperature Sensors Product Bulletin 3
Table 2: Nominal Values for: Nickel (Ni), Platinum Applications
(Pt)�, and Thermistor Sensors Averaging Sensing
Temperature Resistance (ohms) Series-parallel wiring arrangements of four(2 x 2), nine
°F °C 1k Ni 1k Pt� Thermistor (3 x 3), sixteen (4 x 4), or more sensors provide an
2.2k 10k average temperature reading in an area or large duct
when one sensor cannot provide a representative
-50 -46 674 821 109,905 489,981 reading. (See Figure 4.)
-40 -40 699 843 75,487 366,185
A series-parallel arrangement requires the same
-30 -34 725 865 52,584 233,990 number of parallel-connected sensors as there are
-20 -29 751 887 37,123 165,085 series-connected sensors. For example:
-10 -23 777 908 26,544 117,978 . with four sensors, connect two parallel legs with
0 -18 803 930 19,210 85,349 two sensors in series in each leg
10 -12 830 952 14,063 62,464 . With nine sensors, connect three parallel legs with
20 -7 858 974 10,408 46,221 three sensors in series in each leg
30 -1 885 996 7,783 34,562 Note: All sensors in a series-parallel network must be
40 4 914 1,017 5,879 26,103 of the same sensor type and value. For example, use
50 10 942 1,039 4,482 19,903 all 100 ohm platinum or all 1k ohm nickel sensors.
60 16 971 1,061 3,449 15,313
To
70 21 1,000 1,082 2,676 11,883 Controller
80 27 1,030 1,104 2,094 9,298
90 32 1,060 1,125 1,651 7,333
100 38 1,090 1,147 1,312 5,827
110 43 1,121 1,168 1,050 4,663
120 49 1,152 1,190 846 3,757
a
130 54 1,184 1,211 686 3,048 s
140 60 1,216 1,232 560 2,488 -
150 66 1,248 1,254 460 2,043 Figure 4: Nine-Sensor Series-Parallel Wiring
160 71 1,281 1,275 380 1,687
170 77 1,314 1,296 315 1,401 For specific TE-6300 Series Temperature Sensor
180 82 1,348 1,317 263 1,170 applications, see Table 3.
190 88 1,382 1,339 221 982
200 93 1,417 1,360 186 828
210 99 1,452 1,381 158 701
220 104 1,487 1,402 134 597
1. For 100 ohm platinum sensors, divide resistance values
by 10.
4 TE-6300 Series Temperature Sensors Product Bulletin
Table 3: TE-6300 Series Temperature Sensor Applications
Application Nominal Sensor Type Application Notes
Probe
Length,
in. (mm)
Duct Probe 4(102) 1 k ohm Thin—Film • Ideal in freezer lockers or for mounting outside of the sensed area.
8(203) Nickel • Available with plastic enclosure, metal enclosure, or flange mount.
18(457) 1 k ohm Thin—Film • Use TE-63xxM or TE-63xxV models for plenum applications.
Platinum • Use TE-6300-613 accessory kit with TE-63xxM models to meet
2.2k ohm Thermistor IMC requirements.
10k ohm Thermistor • Use TE-6001-13 metal cover kit with TE-63xxP models to meet
Type II UL 1995 plenum requirements.
• Order an optional TE-63xxP model accessory: 12 in. (300 mm)probe.
Duct 8 ft 1 k ohm Nickel Wire • Use to sense duct temperature where stratification can occur,such as
Averaging (2.4 m) 100 ohm Platinum mixed air ducts.
Element 10 ft(3 m) Equivalent Wire • Duct averaging models come in three styles: plastic enclosure, metal
17 ft 1 k ohm Platinum enclosure,or flange mount.
(5.2 m) Equivalent Wire • Use about 1 ft(0.3 m)of sensor per sq ft(0.09 m2)of duct cross
20 ft section.
(6.1 m) • Use a series-parallel sensor network to cover larger ducts.
• Use a TE-6001-8 element holder(recommended)when installing an
averaging sensor in a duct.
• Use TE-63xxM or TE-63xxV models for plenum applications.
• Use TE-6300-613 kit with TE-63xxM models to meet IMC
requirements.
• Use the TE-6001-13 metal cover kit with TE-63xxP models to meet
UL 1995 plenum requirements.
Outdoor Air 3(76) 1 k ohm Thin-Film Nickel • Use to sense outside ambient temperature to determine efficient
1 k ohm Thin-Film heating and cooling strategies.
Platinum • Mount the sensor out of direct sunlight and away from exhaust vents or
2.2k ohm Thermistor equipment that can cause inaccurate temperature sensing.
10k ohm Thermistor,
Type II
Strap- 3(76) 1 k ohm Thin-Film • Clamp the probe directly to a pipe or the device to be sensed.
Mount Nickel • Mount the probe away from fans or radiant heat that can affect
10k ohm Thermistor, measurement of the sensed device.
Type II • Use for plenum applications.
• Order an accessory mounting kit or use readily available hardware
for pipe up to 11 in. (280 mm)diameter.
Wall Mount N/A 1 k ohm Thin-Film • Use to sense room or space temperature.
Nickel • Order an accessory cover with a thermometer or to match the style of
1 k ohm Thin-Film existing installations.
Platinum • Mount the sensor on an inside wall,out of direct sunlight and away
2.2k ohm Thermistor from radiant heat.
IWell 6(152) 1 k ohm Thin-Film : Available with plastic or metal enclosure.
Insertion 8(203) Nickel Threaded sensor holder has 1/2-14 NPT threads;threadless holder
Probe 1 k ohm Thin-Film accommodates setscrew-type wells.
Platinum • Mount the thermal well at an angle so condensation runs out of the
2.2k ohm Thermistor well. If not possible, seal the sensor holder and the wiring end of the
10k ohm Thermistor sensor probe with RTV silicone sealant.
Type II • Use TE-63xxM models for plenum applications.
• Use TE-6001-13 metal cover kit with TE-63xxP models to meet
UL 1995 plenum requirements.
• Use the accessory 12 in. (305 mm)probe with the TE-63xxP sensor in
longer wells.
• Order compatible thermal wells, using Table 5 and Table 6 or Table 7.
TE-6300 Series Temperature Sensors Product Bulletin 5
Ordering Information Note: Use the TE-63xxM or TE-63xxV model to meet
To order a TE-6300 Series temperature sensor, contact plenum requirements where UL1995 rating is
the nearest Johnson Controls representative. Specify accepted, or replace the existing plastic cover on the
the desired sensor product code number from Table 4 TE-63xxP models with the TE-6001-13 Metal Cover
and accessories from Table 5, depending on the Kit.
model. Use the TE-63xxM model and a TE-6300-613
Accessory Kit to replace the plastic bushing to meet
International Mechanical Code (IMC) requirements.
TE-63 x z M — x
Sensor Type Suffix
1 = 1 k ohm Thin-Film Nickel or See Table 4
1 k ohm Nickel Wire Averaging Probe Style
2= 1 k ohm Thin-Film Piatinum or Enclosure Type
1 k ohm Platinum Equivalent Wire Averaging 1 =Duct Probe,8 in.(203 mm)
3= 100 ohm Platinum Equivalent Wire Averaging 2 =Well Insertion,8 in.(203 mm) =No Enclosure
4=2,252 ohm NTC Thermistor 3 =Outdoor Air,3 in.probe(76 mm) M=Metal
6= 10k ohm NTC Thermistor,Type II 4=Wall Mount P =Plastic
5=Duct Averaging,8 ft(2.4 m) V=Flange Mount
6 =Duct Averaging, 17 ft(5.2 m)
7 =Duct Averaging, 10 ft(3 m)
8 =Duct Averaging,20 ft(6.1 m)
A=Well Insertion,6 in. (152 mm)
G=Duct Probe,4 in.(102 mm) a
J =Duct Probe, 18 in.(457 mm)
S=Strap-Mount _
Figure 5: Ordering Template
Note: Not all possible combinations are available.See Table 4: Product Ordering (Part 2 of 3)
Table 4 for available models. Sensor Mounting Probe Product
Table 4: Product Ordering (Part 1 of 3) Style Length Code
Sensor Mounting Probe Product in. (mm) Number
Style Length Code � Platinum Duct 4 (102) TE-632GM-1
in. (mm) Number I (1k ohm) g (203) TE-6321M-1
Nickel Averaging� 8 ft(2.4 m) TE-6315M-1 TE-6321 P-1
(1k ohm)
TE-6315V-2� � 18(457) TE-632JM-1
17 ft TE-6316M-1 � Flange 4 (102) TE-632GV-2
(5.2 m) TE-6316V-2� � 8 (203) TE-6321V-2
� Duct 4(102) TE-631 GM-1 Outdoor Air 3 (76) TE-6323P-1
� 8(203) TE-6311 M-1 Wall2 N/A TE-6324P-1
TE-6311 P-1 � Well 6 (152) TE-632AM-2
� 18(457) TE-631JM-1 � 8 (203) TE-6322M-1
� Flange 4(102) TE-631GV-2
� 8(203) TE-6311V-2
Outdoor Air 3(76) TE-6313P-1
Strap- 3(76) TE-631 S-1
Mount
Wall2 N/A TE-6314P-1
� Well 6(152) TE-631AM-2
� 8(203) TE-6312M-1
6 TE-6300 Series Temperature Sensors Product Bulletin
Table 4: Product Ordering (Part 3 of 3)
Sensor Mounting Probe Product
Style Length Code
in. (mm) Number
Platinum 1 k ohm 10 ft(3 m) TE-6327P-1
Equivalent Averaging� 20 ft TE-6328P-1
(6.1 m)
100 ohm 10 ft(3 m) TE-6337P-1
Averaging� 20 ft TE-6338P-1
(6.1 m)
� Thermistor Duct 8(203) TE-6341 P-1
I (2.2k ohm) Flange 4(102) TE-634GV-2
� 8(203) TE-6341V-2
Outdoor Air 3(76) TE-6343P-1
Wall2 N/A TE-6344P-1
� Well 8(203) TE-6342M-1
� 6(152) TE-634AM-2
� Thermistor Duct 4(102) TE-636GM-1
I (10k ohm) g(203) TE-6361 M-1
Type II
TE-6361 P-1
� 18(457) TE-636JM-1
� Flange 4(102) TE-636GV-2
� 8(203) TE-6361V-2
Outdoor Air 3(76) TE-6363P-1
Strap- 3(76) TE-636S-1
Mount
� Well 6(152) TE-636AM-2
� 8(203) TE-6362M-1
1. Two TE-6001-8 Element Holders come with the platinum
equivalent averaging sensors. Order separately to use
with a nickel averaging sensor.
2. Order the TE-1800-9600 Mounting Hardware separately
to mount the wall unit to a wallbox.
Table 5: Optional Accessories� (Part 1 of 2)
Product Code Number Description
F-1000-182 Thermal Conductive Grease for element wells [8 oz.(.23 kg)]
T-4000-xxxx Wall Mount Cover(see Table 9)
T-4000-119 Allen Head Tool for Wall Mount Cover Screws(order in multiples of 30)
TE-1800-9600 Mounting Hardware for mounting the wall mount unit to a wall box
TE-6001-8 Element Holder for mounting an averaging sensor(order in multiples of 10)
TE-6001-13 Metal Cover and Gasket Kit(5 per package)
I TE-6300-101 12 in. (305 mm)(1 k ohm) Nickel Probe(cut to an appropriate length)Z
I TE-6300-102 12 in. (305 mm)(1 k ohm) Platinum Probe (cut to an appropriate length)2
TE-6300-103 1/2-14 NPT Plastic Sensor Holder without retainer(order in multiples of 10)
TE-6300 Series Temperature Sensors Product Bulletin 7
Table 5: Optional Accessories� (Part 2 of 2)
Product Code Number Description
I TE-6300-104 12 in. (305 mm)(2.2k ohm)Thermistor Probe(cut to an appropriate length)Z
TE6300-613 IMC Kit, Metal Knockout Plug, Metal Clamp Connector(order in multiples of 10)
TE6300-614 Cable Tie Mounting Kit, 0.50 to 2.625 in. (12.7 to 66.7 mm)Bundle Diameter
(10 per package)
TE6300-615 Cable Tie Mounting Kit, 11 in. (280 mm)Maximum Bundle Diameter
TQ-6000-1 4 to 20 mA Output Transmitter for use with the 100 ohm platinum sensor
� TE-6300W-102 6 in. (152 mm)Stainless Steel Well (direct mount)
� TE-6300W-101 6 in. (152 mm) Brass Well (direct mount with thermal grease included)
� TE-6300W-110 8 in. (203 mm)Stainless Steel Well
1. For accessory usage, see Table 6, Table 7, and Table 8.
� 2. Cut 12 in. (305 mm)probes to a minimum of 3 in. (76 mm).
Table 6: Typical Accessory and Replacement Part Usage for TE-6300M Models
Product Description r � �
�- r � � N � � � � N � � � � N � � �
� � � � � � � � � � �
Code � � � � � � � � � � � � � � � � � �
N u m ber � `�' 'r' `° Q �7 -' � `�' Q C� � r `" Q C7 �' Q
� r r � r � � N N N N N �O �G �G �O CD �
M M M M M M M M M M M M M M M M M M
�G �G �O �G �G �D tD tG �O tD �G �G �O tG �G �D tG �G
� � � i � � � i � � i � � i � � � �
W W W W W W W W W W W W W W W W W W
I— H I— I— H I— I— H I— F- H F— F— H F— F— H F—
TE-6001-8 Averaging Bracket X X
TE-6300-611 Brass 1/2-14 NPT Holder X X X
TE-6300-613 IMC Kit X X X X X X X X X X X X X X X X X X
TE-6300W-110 8 in. (203 mm)Stainless Steel Well X X X
TE-6300W-101 6 in.(152 mm) Brass Well(direct mount X X X X
with thermal grease included)
TE-6300W-102 6 in. (152 mm)Stainless Steel Well X X X X
(direct mount)
Table 7: Typical Accessory and Replacement Part Usage for TE-6300P Models (Part 1 of 2)
Product Code Description � � � r � � � � � � � � � r �
, � � , � � � , � � � � � � �
Number aaaaaaaaaaaaaaa
� M � rM � I� 001� 00rM � � M
� � � N N N N N M M 'd' eF 'd' t0 cD
M M M M M M M M M M M M M M M
�O t0 �D �D �O t0 �D �G �G t0 �D �G t0 t0 <O
� � � � � � � � � � � � � � i
W W W W W W W W W W W W W W W
F— I— H H F- I— F— I— I— I— F— F— I— H F�
T-4000-119 Allen Head Tool X X X
TE-1800-9600 Mounting Hardware X X X
TE-6001-8 Averaging Bracket X X X X
TE-6001-13 Metal Cover Kit X X X X X X X X X X X
� TE-6300-101 12 in. (305 mm), 1k ohm Nickel Probe X
� TE-6300-102 12 in. (305 mm), 1k ohm Platinum Probe X
� TE-6300-104 12 in.(305 mm),2.2k ohm Thermistor Probe X
� TE-6300-601 8 in. (203 mm), 1k ohm Nickel Probe X
� TE-6300-602 8 in. (203 mm), 1k ohm Platinum Probe X
� TE-6300-603 3 in. (76 mm), 1k ohm Nickel Probe X
8 TE-6300 Series Temperature Sensors Product Bulletin
Table 7: Typical Accessory and Replacement Part Usage for TE-6300P Models (Part 2 of 2)
Product Code Description � t- �- .- �- .- � .- � � � � � r .-
� � � � � � � � � � � � � � �
Number aaaaaaaaaaaaaaa
� M � e- M � I� OOh00 � M � rM
�- rrNNNNNMM � � � tO <D
M M M M M M M M M M M M M M M
�O CO �O �C �O t0 �O �O �O t0 �O �C Cfl t0 �O
� � � � � � � � � � � � � � �
W W W W W W W W W W W W W W W
H H H H H H H H H H H H � H H
TE-6300-604 3 in. (76 mm), 1k ohm Platinum Probe X
TE-6300-605 Plastic 1/2-14 NPT Holder X X X X
� TE-6300-606 8 in. (203 mm),2.2k ohm Thermistor Probe X
TE-6300-607 3 in. (76 mm),2.2k ohm Thermistor Probe X
TQ-6000-1 4 to 20 mA Output Transmitter X X
Table 8: Typical Accessory and Replacement Part Usage for TE-63xS Models
Product Code Number Description
F-1000-182 Thermal Conductive Grease for element wells, (8 oz.)
TE6300-614 Cable Tie Mounting Kit, 0.50 to 2.625 in. (12.7 to 66.7 mm)Bundle Diameter(10 per package)
TE6300-615 Cable Tie Mounting Kit, 11 in. (280 mm) Maximum Bundle Diameter
TE-6300 Series Temperature Sensors Product Bulletin 9
Table 9: T-4000 Covers Available for the Wall-Mount TE-63x4P Series
Product Code Horizontal Vertical Thermometer, Faceplate/Cover Color
Number Johnson Controls Johnson Controls with °F/°C Scale
Logo Logo
T-4000-2138� Brushed Aluminum/Beige
T-4000-2139 X
T-4000-2140 X X
T-4000-2144 X
T-4000-2639 X Brown and Gold/Beige
T-4000-2640 X X
T-4000-2644 X
T-4000-3139 X Brushed Aluminum/White
T-4000-3140 X X
T-4000-3144 X
1. Without Johnson Controls logo
Repair Information Table 10: Replacement Parts (Part 2 of 2)
For a replacement temperature sensor, see Table 4 Product Code Description
and contact the nearest Johnson Controls Number)
representative. For a replacement sensor probe for TE-6300-606 8 in. (203 mm), 2.2k ohm Thermistor
TE-63xxP duct, well, and outdoor-air models, see I Probe
TBble 10. TE-6300-607 3 in. (76 mm), 2.2k ohm Thermistor
Note: If the TE-63xxV, TE-63xS, or TE-63xxM Series Probe
temperature sensor fails to operate within its TE-6300-609 Threadless Plastic Sensor Holderwith
specifications, replace the unit. Retainer(10 per package)
Table 10: Replacement Parts (Part 1 of 2) TE-6300-611 1/2-14 NPT Threaded Brass Sensor
Holder(Order in multiples of 10)
Product Code Description TE-6300-612 Threadless Brass Sensor Holder
Number) (Order in multiples of 10)
� TE-6300-601 8 in. (203 mm), 1 k ohm Nickel Probe
I TE-6300-602 8 in. (203 mm), 1 k ohm Platinum
Probe
TE-6300-603 3 in. (76 mm), 1 k ohm Nickel Probe
TE-6300-604 3 in. (76 mm), 1 k ohm Platinum Probe
TE-6300-605 1/2-14 NPT Threaded Plastic Sensor
Holder with Retainer(10 per package)
10 TE-6300 Series Temperature Sensors Product Bulletin
Technical Specifications
TE-6300 Series Temperature Sensors (Part 1 of 2)
Sensor 1k ohm Nickel 1k ohms at 70°F(21°C)
Reference 1 k ohm Nickel Averaging
Resistance
1 k ohm Platinum 1 k ohms at 32°F(0°C)
100 ohm Platinum Averaging 100 ohms at 32°F (0°C)
1k ohm Platinum Averaging 1k ohms at 32°F(0°C)
2.2k ohm Thermistor 2,252 ohms at 77°F(25°C)
10k ohm Thermistor 10.Ok ohms at 77°F(25°C)
Sensor 1k ohm Nickel ±0.34F° at 70°F (±0.19C° at 21°C)
Accuracy 1 k ohm Nickel Averaging ±3.4F° at 70°F (±1.9C° at 21°C)
1k ohm Platinum ±0.73F°at 70°F(±0.41C°at 21°C), DIN Class B
100 ohm Platinum Averaging ±1.OF°at 70°F(±0.58C° at 21°C)
1k ohm Platinum Averaging
2.2k ohm Thermistor ±0.36F° (±02C°)in the range: 32 to 158°F(0 to 70°C)
10k ohm Thermistor ±0.9F° (±0.5C°)in the range: 32 to 158°F(0 to 70°C)
Sensor 1 k ohm Nickel Approximately 3 ohms/F° (5.4 ohms/C°)
Temperature 1 k ohm Nickel Averaging
Coefficient
(see Table 2) 1 k ohm Platinum Approximately 2 ohms/F° (3.9 ohms/C°)
100 ohm Platinum Averaging Approximately 0.2 ohms/F° (0.39 ohms/C°)
1 k ohm Platinum Averaging Approximately 2 ohms/F° (3.9 ohms/C°)
2.2k ohm Thermistor Nonlinear, Negative Temperature Coefficient(NTC)
10k ohm Thermistor Nonlinear NTC, Johnson Controls Type II
� Electrical TE-63xxM 22 AWG (0.6 mm diameter)x 6 in. (152 mm)long
Connection TE-63xxP
� TE-63xxP Nickel Averaging 18 AWG (1.0 mm diameter)x 6 in. (152 mm)long
TE-63xS 22 AWG (0.6 mm diameter)x 10 ft(3 m)long plenum-rated cable
TE-63xxV 22 AWG (0.6 mm diameter)x 10 ft(3 m)long plenum-rated cable with
0.25 in. (6.35 mm)female quick-connect terminals
Materials Probes Nickel Averaging: 0.094 in. (2.4 mm)Outside Diameter(O.D.)
copper tubing
Nickel Averaging Adaptor 0.25 in. (6.35 mm)O.D. Brass
Platinum Averaging Probe: 0.19 in. (4.8 mm)Aluminum tubing
All Others(except Averaging):0.25 in. (6.35 mm)O.D. Stainless Steel
TE-63xxM Enclosure: Corrosion-Protected Steel
Well Sensor Holder: 0.875 in. (222 mm)Hex Brass
TE-63xxP Conduit box and Shield: Rigid Thermoplastic
Mounting Plate Aluminum
Sensor Holder Rigid Thermoplastic
Wall Mount Base Plate: Corrosion-Protected Steel
Wall Mount Cover: Rigid Thermoplastic(White)
Wall Mount Face Plate: Brushed Aluminum
TE-63xxV Mounting Flange: Stainless Steel
TE-6300 Series Temperature Sensors Product Bulletin 11
TE-6300 Series Temperature Sensors (Part 2 of 2)
Operating TE-63xxM -50 to 220°F (-46 to 104°C)
Conditions TE-63xxP Enclosure: -50 to 122°F (-46 to 50°C)
Sensor Probe: -50 to 220°F (-46 to 104°C)
TE-63xS Sensor Probe: -50 to 220°F (-46 to 104°C)
TE-63xxV Wire Harness: -50 to 122°F (-46 to 50°C)
Shipping TE-63xxM Duct Averaging: 0.9 Ib(0.41 kg)
Weight Duct Mount: 0.4 Ib(0.18 kg)
Well Insertion: 0.5 Ib (0.23 kg)
TE-63xxP Duct Averaging: 0.5 Ib(0.23 kg)
Duct Mount: 0.4 Ib(0.18 kg)
Outdoor Air: 0.5 Ib (0.23 kg)
Wall Mount: 0.2 Ib (0.09 kg)
Well Insertion: 0.35 Ib(0.16 kg)
TE-63xS Strap-Mount: 0.2 Ib(0.09 kg)
TE-63xxV Duct Averaging: 0.7 Ib(0.32 kg)
Duct Mount: 0.2 Ib(0.09 kg)
Dimensions TE-63xxM Duct Averaging: 1.87 x 1.87 x 1.80 in.
(HxWxD) (47.5x47.5x45.8mm)plus8or17ft
(2.4 or 5.2 m)element
Duct Mount: 1.87 x 1.87 x 1.80 in.
I (47.5 x 47.5 x 45.8 mm) plus 4, 8, or 18 in.
(102, 203, or 457 mm)element
Well Insertion: 1.87 x 1.87 x 1.80 in.
(47.5 x 47.5 x 45.8 mm)plus 6 or 8 in.
(152 or 203 mm)element
TE-63xxP Duct Averaging: 5.97 x 1.38 x 2.75 in. (152 x 35 x 70 mm)
plus 8, 10, 17,or 20 ft(2.4, 3.0, 52,or 6.1 m)
element
Duct Mount: 5.97 x 1.38 x 2.75 in. (152 x 35 x 70 mm)
plus 6 or 8 in. (152 or 203 mm)probe
Outdoor Air: 5.97 x 3.47 x 4.46 in. (152 x 88 x 113 mm)
Wall Mount: 2.09 x 3.12 x 1.80 in. (53 x 79 x 46 mm)
Well Insertion: 5.97 x 1.38 x 2.75 in. (152 x 35 x 70 mm)
plus 6 or 8 in. (152 or 203 mm)probe
TE-63xS Strap-Mount: 0.25 in. (6.4 mm)diameter
x 3.00 in. (76 mm)long
TE-63xxV Duct Averaging: 2.25 x 1.50 in. (57 x 38 mm) plus 8 or 17 ft
(2.4 or 5.2 m)element
Duct Mount: 2.25 x 1.50 in. (57 x 38 mm) plus 4 or 8 in.
(102 or 203 m)element
The performance specifications are nominal and conform to acceptable industry standards.For application at conditions beyond these
specifications, consult the/ocal Johnson Controls office.Johnson Controls, /nc.sha/l not be liab/e for damages resu/ting from misapp/ication or
misuse of its products.
/,�� �
�vhnsvn ' ���� Building Efficiency
Cc�ntr€�Is 507 E. Michigan Street, Milwaukee, WI 53202
Metasys0 and Johnson Controls0 are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. O 2009 Johnson Controls, Inc.
12 TE-6300 Series Temperature Sensors Product Bulletin
Published in U.S.A. www.johnsoncontrols.com