HomeMy WebLinkAboutAnnunciator Spec FSCS ANNUNCIATOR
� � � � � 0 � � SPECIFICATION
FIRE FIGHTERS' SMOKE CONTROL STATION SPECIFICATION
The FSCS panel shall be UUKL listed and conform to NFPA-92A guidelines.
The enclosure shall be constructed of cold rolled steel with welded and ground
seams and finished with a black powder textured finish. The annunciator door
shall have a concealed stainless steel piano hinge and the door shall be finished
with a black powder textured finish or brushed stainless steel as directed by the
engineer. The door shall be fastened with a key locic with no other fasteners
visible.
The graphic display shall be a lamination which consists of a velvet textured
polycarbonate face, a reverse printed image and a 1/8"aluminum backing. The
display shall be printed with pigmented inks, for long life, on UL94V0 flame
retardant grade lexan. The graphic must have full color capacity to show differ-
ent colors far supply, exhaust, and pressurization. A velvet texture finish must
be applied to the polycarbonate face to eliminate glare. A dry erase coating
shall be applied to display,when required.
Leds shall protrude through the ]aminate for 180 degrees visibility. They shall
be wired to designated terminals for interface with customer's remote
controllers.
AHU Switches must be UL recognized components with a minimum rating of
24 VDC/AC, lamp. They shall be wired to designated terminals for interface
with customer's remote controllers.
The panel must include a Key Enable Switch, a Lamptest Switch, and a Power
On Led.
OlOR0534
Thc H.R.Kirkland Co.,Inc/4935 Allison St.#13/Arvada,Colorado 80002/(303)422-6670/(800)247-2303/Fax(303)420-1856/ww��.hrkirldand.com