HomeMy WebLinkAboutM10-0154NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT
,�
�ow�o�vnQ; •
Town of Vail, Community Development, 75 South Frontage Road, Vail, Colorado 81657
p. 970-479-2139 f. 970.479.2452 inspections. 970.479.2149
MECHANICAL PERMIT
AMF
Job Address: 174 E GORE CREEK DR VAIL
Location.....: UNIT 343, LODGE AT VAIL
Parcel No...: 210108221045
OWNER RUTH LAPIDUS QUALIFIED PERSO OS/11/2010
23 DELEVAN LN
HARRISON
NY 10528
APPLICANT HOME & HEARTH OUTFITTERS 08/11/2010 Phone: (303) 327-4654
730 S. JASON ST. #28
DENVER
COLORADO 80223
License: 368-M
CONTRACTOR HOME & HEARTH OUTFITTERS 08/11/2010
730 S. JASON ST. #28
DENVER
COLORADO 80223
License: 368-M
Desciption: GAS FIREPLACE (1)
Valuation: $3,900.00
Phone: (303) 327-4654
ALL TIMES
Permit #: M10-0154
Project #: PRJ10-0157
Status . . . : ISSUED
Applied . . : 08/11/2010
Issued . . : 08/11/2010
Expires . .: 02/07/2011
..................»...,.................».........»�..«.........................FEE SUMMARY........*,.............«...«......,�..........................�........«.....,M.....»
Mechanical Permit Fee--> $80.00 Will Cali-----------> $4.00 Total Calculated Fees--->
Plan Check--------------> $20.00 Use Tax Fee----> $104.00
$0.00 Additional Fees---------> $0.00
Investigation--------------> $0.00 TOTAL PERMIT FEE--> 5104.00
Total Calculated Fees—> $104.00 Payments----------------> E704.00
BALANCE DUE-----> s0.00
.....«.«.........»......«...»» ........................................«+...........«.....�,......................�..«.....................:....�........�...............�..........+.+.
APPROVALS
Item: 05100 BUILDING DEPARTMENT
08/11/2010 JRM Action: AP
wl.ii►t�+�r+�fn,rw��r►�►+r,R+rtwxwwrrt���►►rtwrww,vw*�►�►�tew+r�wwiw,t,t,�+*r►wwsnet�:+,tw►►►xrex�w�iew���:�kw�wwvert+.w►�►rrxwveirt�,�+►frx*wrrwww�►#►►►�tnwww�r�w*�s,R►►wfwnie��r++�rt►���ert+r����ww►►*rttr+xwwtw:,t
CONDITION OF APPROVAL
Cond: 12
(BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE.
Cond: 42
(BLDG 2009) CARBON MONOXIDE DETECTORS REQUIRED TO BE INSTALLED PER 2009 IRC R315
...... �....+......»...:.......» ............................ «�..............+., M........,.........,................ «............... «.......... «.++.............+................,'.........
DECLARATIONS
I hereby acknowledge that I have read this application, fllled out in full the information required, completed an accurate plot plan, and state that all the information
as required is correct. I agree to comply with the information and plot pian, to comply with all Town ordinances and state laws, and to build this structure
according to the towns zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town
applicable thereto.
REQUESTS FOR INSPECTION SHALL BE MADE TWENTY-FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.4 .214 OR AT OUR OFFICE FROM 8:0(
wu • nu
/�
te
m e c h ca n i ca I� e rm it_041908
���*******�*��*******�************��*****�+****�*******+**************�*******�*************
TOWN OF VAIL, COLORADO Statement
�*****�*�*�************+***********************��**+********�*****************++***�******«*
Statement Number: R100001041 Amount: $104.00 08/11/201011:34 AM
Payment Method:Credit Crd Init: LC
Notation: CREDIT CARD
FROM BRIAN STICKLAND, HOME AND HEARTH
-----------------------------------------------------------------------------
Permit No: M10-0154 Type: MECHANICAL PERMIT
Parcel No: 2101-082-2104-5
Site Address: 174 E GORE CREEK DR VAIL
Location: UNIT 343, LODGE AT VAIL
Total Fees: $104.00
This Payment: $104.00 Total ALL Pmts: $104.00
Balance: $0.00
***r**�****�**************�********s****r**********************�****�***********************
ACCOUNT ITEM LIST:
Account Code
--------------------
MP 00100003111100
PF 00100003112300
WC 00100003112800
Description
------------------------------
MECHANICAL PERMIT FEES
PLAN CHECK FEES
WILL CALL INSPECTION FEE
Current Pmts
80.00
20.00
4.00
-----------------------------------------------------------------------------
z
�
MECHANICAL PERMIT
Boiler / Furnace & Firealace Applications MUST include:
❑ Complete Mechanical Room Floor Plan with Dimensions ❑ Boiler size & efficiency PpF ,�,•i�, fo
❑ Combustion Air Duct Size and Location �Equipment Cut Sheets for Fireplaces/Log Sets 6� l�,y` j,� d
c��lue detail or Vent size, location & termination (Manufacturer's info showing make, model & approval listing)
❑ Gas Piping layout including development length calculations Office Use:
❑ Heat Loss Calculations Project #: �f`-'� I d "a j_ S�
Project Street Address: Building Permit #: _,� / o- o U�3
�7`� E C�GQ-E CR.E�� D/L. ,3�3 Mechanical Permit#: /"1 �d — ����
(Number) (Street) (Suite #)
Lot #: Block # Subdivision:
Building/Complex Name: �0�� A7"' VoQ/�-
, Define Scope and Location of Work: /�vS�►'A[,L 6NE
Contractor Information:
Company: f�✓O�HF" i f,�E74/��1 O�u�F/ T7t n.s ��- E/ /�P4� �''
Company Address: f O BoX SQS6
City: GOWiq k-O,S State: CR Zip: 8/6,3 Z (use add� ional sheet if necessary)
Contact Name: /�Yc.E' Nbi�AND
p�'�a ' ' Included
Contact Phone: _,� SG57- .�`y/`�¢"fr- 8Gy'Z as Pi in by Other
������ ��� ❑ Wood to Gas Fireplace Conversion
E-Mail %/�.@ or►vcanc��i%Q.i�ou- _
Town of Vail Contractor Registration No.: Boiler Location:
` Interior ( ) Exterior ( ) Other ( )
i� ,, . , . �
Number of Existing Fireplaces:
Cont ignature (required)
- .. _ _ _ _ , .. Gas Appliances Gas Logs Wood/Pellet _
Property Information ._ , „-, _ _
Parcel #: Number of Proposed Fireplaces:
(For parcel #, contact Eagle County Assessors Office at 970-328-8640 or I' Gas Appliances � Gas Logs Wood/Pellet _
visitwww.eaglecounty.us/patie) _ _ _ -, ,
Type of Building:
Tenant Name�
(Commercial Properties) ' Single-Family ( ) Duplex ( ) Multi-Family (�,�y�ommercial (
Owner Name: G.AP/DUS '
Restaurant ( ) Other ( )
Complete Valuation for Mechanical Permit: (including fireplaces)
Mechanical $:
.� 3, 9 v a G�%
C:lcdev\forms\permits\bu i Iding\mechanical�ermit_01 O 110
Date Received:
'
� � � u V
AUG 0 6 2010
�
iOUV� OF Vpi�,
�
WARNING: If the information in these
instructions is not followed exactly, a fire
or expiosion may result causing property
damage, personai injury or death.
FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appiiance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch;
• Do not use any phone in your building.
• Immediately call your gas supplier from
a neighbour's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier call
the fire department.
Installation and service must be performed by
a qualified installer, service agency or the gas
suppiier.
This appliance may be instalied in an aftermarket
permanently located, manufactured home (USA
only) or mobile home, where not prohibited by
local codes.
This appliance is only for use with the type of gas
indicated on the rating plate. This appliance is
not convertible for use with other gases, unless
a certified kit is used.
This appliance is suitable for installation in a
bedroom or bed sitting room.
� � � � V �
AUG 0 9 1010
TOWN OF VAI
�;
TOWN & COUNTRY
FIREPLACES TM
TC36 & TC36 ARCH
INSTALLATION
AND OPERATING
INSTRUCTIONS
MODEL TC36 & TC36AR
SERIES C
MODULAR DiRECT VENT
FIREPLACE
090610-48 TC36_CE
5056.427.0
Caution: The gas line should be installed by a qualified service person in accordance with
all building codes. This section is intended as a guide for qualified technicians installing this
appliance. Consult local and / or national building codes before proceeding.
Gas supply line access holes are located at the top and left sides of the Control Box. Gas
valve inlet accepts a 3/8" N.P.T. fitting. Correct gas line diameter must be used to assure
proper operation and pressure.
The fireplace has an input rate of 47,000 BTU/HR on both Natural Gas and Propane.
Note:To test the gas pressure, turn off the gas supply before removing the plug from
the supply pressure test port or manifold pressure test port.
Verify gas pressures with the fireplace lit and on the highest setting.
Please refer to the Burner Installation Manual for gas pressure testing procedure.
Correct gas pressure requirement:
Min. Pressure
(Fw purpose W Input ed�ustment)
Max. Pressure
Manifold Pressure
Maximum
Minimum
Natural Gas
5.0" WC
13.9" WC
3.8" WC
2.1" WC
Propane
12.5" WC
13.9" WC
11" WC
5.5" WC
1�
TC36_CE 090610 TOWN & COUNTRY FIREPLACES ��
17
INSTALLER! PLEASE LEAVE WITH HOMEOWNER
INSTALLATION AND OPERATING INSTRUCTIONS
� ,
i / / �
�, . � � �
GAS LOGS
Please Note: It is important that you read instructions before installing or operating gas logs
GENERAL INFORMATION
Gas logs are to be burned only in approved woodburning Fireplace with adequate chimney draft. When burning, the chimne�
damper must be FULLY OPEN. Log set must be installed in fireplace which operates properly when wood fires are burned.
• For best results, natural gas pressure must be 7" to 10 1/2" water
column.
• To simulate real wood burning, the gas burner is designed to burn
a yellow flame. It is normal for the logs to soot-up. The soot can
easily be removed with a vacuum cleaner ar a soft brush.
• A fireplace screen must be in place when the appliance is operating
and, unless other provisions for combustion air are provided, the
screen shall have an opening (s) for introduction of combustion air.
• If used with glass fireplace doors, burn with doors in open position.
• Do not burn wood ar other items with log set. L;Sr;,,g
1269
FOR YOUR SAFETY
If you smell gas:
l. Open Windows.
2. Don't Touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other flam-
mable vapors and liquids in the vicinity
of this or any other appliance.
IMPORTANT INFORMATION
CHECK TO BE SURE LOG SET IS FOR PROPER GAS TYPE
Log sets are designed for use with Natural Gas, unless clearly labeled for Propane (LP). Never use Propane Gas
in a log set designed for Natural Gas, or Natural Gas in a log set designed for use with Propane Gas.
The installation, including provisions for combustion and ven- 'The minimum inlet gas supply pressure for the purpose
tilation air, must conform with local codes or, in the absence of of input adjustment is 7" WC for Natural Gas and 11"
local codes, with the national fuel Gas Code, ANSI Z223.1-1988 WC for Propane Gas.
and NFPA54-1988.
The appliance and its individual shutoff valve must be discon-
nected from the gas supply piping system when testing at test
pressuresin excess of 1/2 psig.
The appliance must be isolated from the gas supply piping system
by closing its individual manual shutoff valve during any pres-
sure testing of gas-supply system at test pressures equal to or less
than 1/2 psig. This is accomplished by closing the gas supply line
valve, which is required by NFPA 54, section 5.54.
The maacimum inlet gas supply pressure for this burner
is 10.5" for Natural Gas and 13" for Propane Gas.
MINIMUM
Log Set Size
18"
21"
24"
30"
36"
FIREPLACE SIZE (No pilot valve installed)
Depth Height Front
Opening
14" 16" 24"
14" 16" 28"
15" 16" 30"
16° 16" 36"
17�� � 6" 42"
It will be necessary to clean the glass periodically. During start-up,
condensation, which is normal, forms on the inside of the glass
and causes dust, lint etc. to cling to the glass surface. Also, initial
paint curing can deposit a slight fiim on the glass. It is therefore
recommended that initially the glass be cleaned two or three times
with non-abrasive common househoid glass cleansers and warm
water. After that, the glass should be cleaned two or three times a
season depending on the circumstances.
Glau Replacement
The glass should be replaced by a qualified person.
REPLACEMENT GLASS FOR BOTH DIRECT VENT UNITS
These models can use either tempered glass or Robax ceramic
or coated Neaoceram glass. Must be 5mm thick.
To replace glass, clean all materials from door frame. Scrape off
old silicone down to metai. Using a high heat silicone (tempera-
ture-resistant to 500°F (260°C) apply a continuous bead of
approximately 1/32" to all four sides of frame and insert glass
with new gasket. Frame should be on flat surface, with a small
� amount of weight pressing glass into silicone. Let dry approxi-
• Warning and Cautions. mately 15 to 20 minutes. The door can be re-installed by revers-
• Do not clean when the glass is hot. ing Steps 1& 2. Use caution when removing broken glass, wear
• Do not use abrasive cleaners. gloves.
• Using a substitute glass wiJl void all product
warranties. Removal of the Glass Door
• Do not strike or abuse glass. Care must be
taken to avoid breakage of the glass. 1. Unlatch the two latches located behind the upper grill.
• Do not operate this fireptace without the glass 2. To remove, pull frame forward and lift from bottom door retainer.
front or with a broken glass.
•
This gas appliance should be installed by a qualified installer in accordance Note: The gas line connection may be made of 1/2" rigid pipe or an
with local building codes and with current CAN/CGA - B149.1 or .2 installa- approved flex connector. Since some municipalities have additional
tion codes for Gas Burning appliances and equipment in Canada and ihe local codes, it is always best to consuk your local authorities and the
National Fuel Gas Code ANSI Z223 in the U.S.A, current CAWCGA - B149.1 or .2 installation code in Canada or the
1. The gas pipeline can be brought in through either the right or the left side National Fuel Gas code ANSI Z223.1 in the U.S.A.
of the appliance. A knockout is provided at either location to allow for the
gas pipe installation and testing of any gas connection.
2. The gas control inlet is 3/8" NPT. Typical installation layout for rigid pipe is
shown at right.
3. When using copper or flex connector, use only approved fittings.
Always provide a union so that gas line can be easily disconnected for
burner or fan servicing. See gas specification for pressure details and rat•
ings.
4. When a vertical section of gas pipe is required for the installation, a con-
densation trap is needed. See CANlCGA-B149.1 or .2 for code details.
3/8' UNION �
�
1/2' x 3J8' SHUTOFF VALVE �
� '�
/� �
tY
3/8' NIPPLE
1/2' GAS SUPPLY
Important• Always check for as leaks with a soa and
5. For natural gas, a minimum of 3/8" iron pipe with gas minimum pressure 9 P
of 4.5" w.c. must be used for supply from the gas meter. Consult with the
water solution. Do not use open flame for leak testing.
local gas utility if any questions arise concerning pipe sizes.
6. A 1!S" NPT plugged tappings are accessible for Gas Specifications
test gauge connection both on the inlet and out- Mode�s MQmv3318N MQzDV3318LP MQIDV3622N MQzDV36221.P
let of the gas v81ve. Fuel Natural Propane Natural Propane
7. Turn the gas supply ON and check for leaks. DO Gas Control Millivolt adjustable Millivolt adjustable Millivolt adjustable Millivolt adjustable
NOT USE OPEN FLAME FOR THIS PURPOSE. �nput
Max�mum 19,000 BTU 18,000 BTU
Use an approved leak testing solution. �ow t2,100 BTU Low 11,soo BTu
8. The appliance and its individual shutoff valve Orifice Size #a5 #55
must be disconnected from the gas supply piping (o - 4500 it)
system during any pressure testing of that sys- Air Shutter 3/16" Open 9/32° Open
tem at test pressures in excess of 1/2 PSIG (3.5 Gas Inlet Size S.I.T. 820 Nova, 3/8" NPT
KPa). Gas Supply Pressure Minimum Normal
9. The appliance must be isolated from the gas Natural Gas 5.5" T'
supply piping system by closing its individual Liquid Propane 11° 11"
shutoff valve during any pressure testing of the Manifold Pressure Natural Gas
gas supply piping system at test pressures equal Man'rfold Pressure High 3.5 IN. W.C./.87 KPa
Manifold Pressure Low 1.6 IN. W.C./.40 KPa
to or less than 1/2 PSIG (3.5 KPa).
21,000 BTU 21,000 BTU
14,200 BTU 16,200 BTU
#43 #54
3/16" Open 3/8" Open
Maximum
9„
12"
Liquid P►opane
10 IN. W.C./2.61 KPa
6.3 IN. W.C./1.57 KPa
For the state of Massachusetts a T handle g�s shut-off valve must be used on a gas
appliance. This T handle gas shut-off valve must be listed and approved by the state of
Massachusetts.This is in reference to the state of Massachusetts state code CMR238.
21
,
11-18-2010 Inspection Request Reporting Page 51
�s4� �m Vail, C� - Citv Of
Requested Inspect Date: Thursday November 18, 2010
Site Address: 174 E GO�tE CREEK DR VAIL
UNIT 343, LODGE AT VAIL
A/P/D Information
Activity: M10-0154 Type: B-MECH Sub Type: AMF
Const Type: Occu ancy : Use:
Owner: RUTH LAPIDUS QUALIFI�D PERSONAL RES
TRST
Contractor: HOME & HEARTH OUTFITTERS Phone: (303) 327-4654
Description: GAS FIREPLACE (1)
Reguested Inspection(s)
Item: 390 MECH-Final
Requestor: HOME & HEARTH OUTFITTERS
Assigned To: "****•""*"*"
Action: Time Exp:
Status: ISSUED
Insp Area:
Requested Time: 04:30 PM
Phone: brian 720-985-7605
Entered By: SBELLM K
i rYl A� 7 ��.`
� (I �-�- �/'�
Inspection Historv
Item: 200 MECH-Rou h "* Approved "*
08/30/1� Inspector: sgremmer
Comment:
Item: 310 MECH-Heating
Item: 315 PLMB-Gas Pipin�g
Item: 320 MECH-Exhaust Hoods
Item: 330 MECH-Supply Air
Item: 340 MECH-Misc.
Item: 390 MECH-Final
Action: AP APPROVED
��
�
REPT131 Run Id: 12193