The URL can be used to link to this page

Home My WebLink AboutData Sheet 1040 IPF Series PSM Data Sheet 1040 /�l � B u I �t Engineered Systems IP Fire SeriesT"' Intelligent Fire Controls �� J ee � -.�- � • PS M �,,,; • PS-24 • APS-4 L� � Description The architecture of an IPF SeriesT"' fire control network is comprised of a series of IP-based distributable modules.These modules include Features alternate configurations of analog loop and NAC circuit modules(ALM- xy), standard display modules (SDM), annunciator control modules . Provides power for all IPF Series (ACM)and other specialized modules noted in other documents. modules, routers and connected With distributed systems, power requirements can be varied according to devices system layout. With IP Fire SeriesT"" controls, power can be centrally • Provides battery and brown out supervision located and then distributed from the central location to remote system Switching 8A Power Supply unit modules or power can be supplied along with the remote system • mounts in IPF pre-configured or modules. remote cabinets • Switching 4A Battery Charging The Power Supply(PS-24) provides 24V/8A of system power. Power is unit mounts in IPF pre-configured available for all modules, switches/routers and attached devices. or remote cabinets • Supervised and Controlled by the Battery charging is accomplished by the Auxiliary Power Supply(APS-4) power Supply Monitor(PSM) which provides 24V/4A of battery charging power. The APS-4 is capable . Charges 70Ah Batteries of charging 70Ah batteries. . IPF-XL can accommodate multiple power supplies with a total of 12A The Power Supply Monitor(PSM)supervises the power supply, battery of available power and an charger and provides for internal/external distribution of power throughout additional 8A of dedicated battery the system.The PSM also monitors for brownout conditions, low/no charging capacity batteries and other electrical monitoring functions established by UL • Maximum number on an individual 864/9�h edition. system: unlimited • Internal and power-limited external Multiple instances of the PS-24,APS-4 and PSM may be installed power taps through an IP Fire SeriesT"" control system as required. There is no • Green/RoHS Compliant system limitation on the amount of power that can be distributed. Special remote cabinetry to accommodate the PS-24,APS-4, PSM and batteries is available when installing power with remote system modules. Listinqs See DS 1045 IPF SeriesT"" Distributed System Cabinet Options for more information. UL File: S24573 CSFM: Pending Like all IP Fire SeriesT"" modules,the PS-24, APS-4 and PSM are MEA: Pending compliant with the Restrictions on Hazardous Substance Directive (RoHS)and are free of many of the toxins normally associated with the electronic manufacturing process: Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls and Polybrominated Diphenyl Ether. Product Data Sheet Number Rev/Revision Date = _ IPF SeriesT"" PSM, PS-24,APS-4 1040 1.3/5/1/2009 IPFIRESERIES" OO Copyright 2008 AsBuilt Engineered Systems, Inc. Enqineer Specification The contractor shall furnish and install, where indicated on the plans, integral power supply and battery charger modules for local and distributed IPF Series fire system modules. The power supply, battery charger and monitor card shall be fully supervised and shall monitor for the presence of AC power as well as battery power and also monitor for low/no battery and brown out conditions.The battery charger shall be capable of charging 70 AH batteries The power supply, battery charger and power supply monitor must be UL listed and UL listed as compatible with the AsBuilt IPF and REM Series fire controls. The power supply, battery charger and power supply monitor modules shall be As Built Engineered Systems part numbers PS-24,APS-4 and PSM. Technical Data PS-24 PSM Power Supply Monitor Input Voltage Range: 88-132 VAC Input Power: 110 VAC/60Hz Output Voltage: 24V Output to Modules in Same Enclosure: Output Current: 8A 24 VDC/8A/non-resettable Working Humidity: 20-90% RH non-cond. Output Leaving Cabinet to Modules in Remote Enclosures: APS--4 24 VDC/3.5A/non-resettable Input Voltage Range: 88-132 VAC Rechargeable Battery Circuit: Output Voltage: 27.6V Type: Sealed Lead Acid Output Current:4A Voltage: 27.6 Working Humidity: 20-90% RH non-cond. Max.Amp Hour Capacity: 70 Expected Standby Op:48 Hours Orderina Information Part Number Data Sheet Description PS-24 1040 8A Power Supply AP-4 1040 4A Battery Charger PSM 1040 Power Supply Monitor Card Related Modules,Accessorv Cards and Cabinets VPM/SDM 1010 VPM/SDM Configuration and Display Modules ALM 1020 Analog SLC and NAC Circuits Cabinets 1045 IPF-xy, IPF-XL and REM-Cabinet Options IPF/IPF-XL 1050 IPF-xy, IPF-XL Pre-Configured Systems Product Name Data Sheet Number Rev/Revision Date = _ _ IPF SeriesT"" PSM, PS-24,APS-4 1040 1.3/5/1/2009 IPFIRfSERIES" As Built Engineered Systems, Inc. Phone: (508)788-8333 ■ �, 1451 Concord Street Fax: (508)788-8334 �� ' I� Framingham, MA 01701-7782 Contact: info asbuiltes.com USA Visit: www.asbuiltes.com Engineered Systems O Copyright 2008 AsBuilt Engineered Systems, Inc.