The URL can be used to link to this page

Home My WebLink AboutData Sheet 2810 IPF Series Addressable Switch Monitor Data Sheet 2810 /�l � B u I �t Engineered Systems IP Fire SeriesT"' Addressable Switch - Monitors `� • DXP-PIM, DXP-MPIM �_ � `� � :,; -� • DXP-PID, DXP-MPID � � - Description The IP Fire SeriesT"' control system provides for Analog Loop Modules (ALM's)that may be installed throughout a protected facility in any number up to the IPF system maximum of 50 modules. IPF SeriesT"" ALM modules Features offer analog addressable signaling line(SLC)circuits that may each have up to 126 detectors or 126 addressable control devices in any combination. • Plate mounted versions AsBuilt switch monitors DXP-PIM, DXP-MPIM, DXP-PID and DXP-MPID are available for surface/flush addressable devices that are a means of connecting and identifying mounting in 4" square boxes conventional monitor points at the main IPF SeriesT"' system. Switch . Field programmable monitors connect to the SLC, are programmed via an 8 pin DIL switch (1-7 • Fully superviSed for addressing, 8 for Class A/B), are polarity insensitive and are used to . Mini-Version with flying leads monitor a single Class A or B (Style D or B)circuit. for compact field installation The switch monitors are designed to monitor the state of one or more single- • LED for polling/alarm pole, volt-free contacts connected on a single pair of cables. annunciation • Monitors dry contact devices In standby mode,the DXP-PID, -MPID, -PIM, -MPIM all monitor their internal . Priority Interrupt available circuitry for status of the device itself and supervises the switch circuit for . Class A or B faults. In the event a fault is detected,the modules will report a trouble to the DIL switch addressing IPF SeriesT"' fire control. � • SmokeClearT"" alert signals AsBuilt switch monitors are available in two varieties(standard or priority- when initiating device (pull interrupt)under two different constructions(plate mounted for 4" boxes/mini- station) has returned to normal module with flying leads for use in a single gang box). position • Green/RoHS Compliant DXP-PIM and DXP-MPIM The Point Identification Module (DXP-PIM)and the Mini Point Identification Module (DXP-MPIM)do not incorporate the priority interrupt feature.These devices produce output states of normal, off-normal, pre-alarm and alarm. DXP-PID and DXP-MPID The Priority Input Device(DXP-PID)and the Mini Priority Input Device(DXP- MPID)incorporate the priority interrupt feature.These devices are used where a fast response is required (as with pull stations). Priority input Listinqs devices produce output states of normal, off-normal and alarm.These devices do not produce pre-alarm output states. UL File: S7003 CSFM: 7300-1394:108 DXP-PIM and DXP-PID are designed to fit a standard 4" box. NEMA OS 1- MEA: 294-95-E-4 1989 or equivalent. DXP-MPIM and DXP-MPID are contained in a simple two-piece plastic box suitable to fit into a single-gang junction box. These devices each have 6 flying leads(18 AWG wire). These devices all use end of line monitoring resistance of 47k'S2. Product Data Sheet Number Rev/Revision Date = _ IPF SeriesT"^ Switch Monitor 2810 1.3/5/1/2009 IPFIRESERIES'" OO Copyright 2008 AsBuilt Engineered Systems, Inc. Enqineer Specification The contractor shall furnish and install,where indicated on the plans, addressable interface devices for the monitoring and supervision of contact type devices connected to the Fire Alarm control. The devices shall monitor a normally open dry contact. The addressable interface devices shall communicate to the main fire control via the analog addressable circuit.The addressable interface device must be UL listed and UL listed as compatible with the AsBuilt IP Fire Series network fire controls. The addressable interface device shall be As Built Engineered Systems part numbers DXP-PIM, DXP-MPIM, DXP-ID and DXP-MPID. Technical Data All D@vIC@S: DXP-PIM and DXP-PID: Current Consumption: 600 NA typically Dimensions:4'/z"W x 4 '/z"H x 1 '/4"D LED on:4 mA Weight: 3 oz Operating Temp: -4°F to 158°F LED visible through fascia plate label Humidity: 0%to 95% (no condensation or icing) Shock: To UL 864 DXP-MPID and DXP-MPIM: Vibration:To UL 864 Dimensions: 3"W x 1 3/4"H x 3/4"D Weight: 1.5 oz LED visible on external body Orderinq Information Part Number Data Sheet Description DXP-PIM 2810 Point Identification Module (55000-805) DXP-MPIM 2810 Mini Point Identification Module (55000-831) DXP-PID 2810 Priority Input Device (55000-806) DXP-MPID 2810 Mini Priority Input Device(55000-830) Related Modules DXP-IOM 2812 Input/Output Monitor(55000-820) DXP-SDR 2814 Sounder(55000-825) DXP-2PID 2816 Dual Priority Input Device(55000-790) DXP-OCM 2818 Output Control Module(55000-863) Related Data Sheets Discovery Detectors: DISC-P, 2106; DISC-I, 2107; DISC-T, 2108; DISC-M, 2109 XP Detectors: XP-P, 2101;XP-I, 2102;XP-T, 2103;XP-M, 2104 Addressable Base Options: All Bases,2310 Product Name Data Sheet Number Rev/Revision Date = _ _ IPF SeriesT"" Switch Monitor 2810 1.3/5/1/2009 IPFIRfSERIES" As Built Engineered Systems, Inc. Phone: (508)788-8333 ■ �, 1451 Concord Street Fax: (508)788-8334 �� ' I� Framingham, MA 01701-7782 Contact: info asbuiltes.com USA Visit: www.asbuiltes.com Engineered Systems O Copyright 2008 AsBuilt Engineered Systems, Inc.