The URL can be used to link to this page

Home My WebLink AboutData Sheet 5000 IPF Series Pull Stations Data Sheet 5000 �� I I t' Engineered System$ IP Fire SeriesTM Addressable and f � . . . . Conventional Pull ��H . PULL P'ULL Stations Description The AB-42SK Series are single contact, key-reset, manual pull stations designed to meet the requirements for many Features applications. They are constructed from a rugged, but lightweight, die-cast metal alloy for increased performance and • Single or Dual Action longevity. This series of stations is available in single action • Addressable or (PULL lever) or dual action (PUSH bar and PULL lever) models. Conventional • Screw Terminal The stations are provided with one normally open contact Connections connected to a terminal strip that can accommodate wiring from DC and AC Voltage Contact #22 to#12 AWG. Contacts are gold plated to minimize risk of • Ratings corrosion. All models have been tested by UL and found in compliance with the pull force requirements of the Americans • Gold Plated Alarm Contacts with Disabilities Act (ADA). The AB-42SK Series stations are • Surface or Weatherproof key resettable. Back-box • Deeper Back-boxes Operation available The stations are operated by pulling the handle marked "PULL" • Optional Station Colors, on the front of the unit as far down as it will go. At that point, Labels & Contacts the handle will lock in place and is easily visible from up to 50 • Green/RoHS Compliant feet. The activation handle is reset by opening the station with the key, placing the "PULL" handle to its normal upright position (resetting the toggle switch when applicable) and relocking the station. On the dual action, the "PUSH" or optional "EMERGENCY" bar moves inward allowing the "PULL" handle to be operated by a single hand. Mountinq Confiqurations Semi-Flush--All models mount on a standard single-gang back- �"-"t° a� =��:;'� c �L us F� p�.� boX. �, � LISTED APPROYEU Surface Mount Interior--Use pat number SGB-32S or the deeper metal back-box (SGB-32SD). �� A L� Surface Mount Exterior--Use part number SGB-32C (SG-WP) or rrvc appCO�ea the deeper die-cast, weatherproof back-box (SGB-32CD) Product Data Sheet Number Rev/Revision Date = _ — IPF SeriesT"' Pull Stations 5000 1.0/7/1/2009 IP FIRE SERIES` O Copyright 2008 AsBuilt Engineered Systems, Inc. Enqineer Specification The contractor shall furnish and install, where indicated on the plans, individually identifiable manual pull stations connected to the Fire Alarm control. The pull stations shall be monitored for device identification, alarm reporting and trouble supervision. The pull station shall be capable of reporting to the fire alarm control and storing in the history log activation,trouble and reset information.The single-action and double action stations shall consist of a die-cast metal alloy housing fitted with a pull out lever which, when operated, locks in position after activating an alarm initiating contact.The double-action station shall also contain an additional lever which requires depression in order to reach the pull out lever. Pull station shall utilize gold plated contacts to minimize the risk of corrosion. Pull Stations shall be key-resettable and shall be compliant with the Americans with Disabilities Act(ADA). The addressable interface device must be UL listed and UL listed as compatible with the AsBuilt IP Fire SeriesT"^ network fire controls.The manual stations shall be As Built Engineered Systems part numbers AB-42SK2 (single action), and AB-42SK1 (double action). Technical Data Listings: UL, ULc, FM, CSFM, MEA Temperature: -400 to 1500F, 90% relative humidity @ 1000F Switch Rating: SG-32- Micro switch 1 Amp @ 30 VDC, 1Amp @ 125 VAC SG-42-Toggle switch 2 Amps @ 125 VDC, 2 Amps @ 240 VAC Weight: 1.2 Ibs Dimensions: 4 3/4"h x 3 1/4"w x 1.1"d Surface-Mount Backbox Dimensions: 4 3/4"h x 3 1/4"w x 2 1/4"d (outside); 2 1/8"d (inside)cast and sheet metal Deep Surface-Mount Backbox Dimensions: 4 3/4"h x 3 1/4"w x 2 3/4"d Orderinq Information Part Number Data Sheet Description AB-42SK2 5000 Single Action Pull Station, Key Reset, Red AB-42SK1 5000 Double Action Pull Station, Key Reset, Red AB-42SK2-NY 5000 Single Action Pull Station, Key Reset, Red—New York City AB-42SK1-NY 5000 Double Action Pull Station, Key Reset, Red- New York City Related Modules SGB-32S Interior, red, surface mount, sheet metal backbox with 3/4" knockouts SGB-32SD Deep-Interior, red, surface mount, sheet metal backbox with 3/4" knockouts SG-WP Weatherproof, red, surface mount, die-cast metal backbox with one tapped hole for 3/4" NPT fitting (same as SGB-32C) SGB-32CD Deep Weatherproof, red,surface mount, die-cast metal backbox with one tapped hole for 3/4" NPT fitting SG-GR01 12 pack of scored, plastic(acrylic) break-rods for spares or replacement Related Data Sheets Discovery Detectors: DISC-P, 2106; DISC-I, 2107; DISC-T, 2108; DISC-M, 2109 XP Detectors:XP-P, 2101; XP-I, 2102; XP-T,2103;XP-M, 2104 Addressable Base Options:All Bases, 2310 Addressable Devices: DXP-PIM/MPIM, DXP-PID/MPID, 2810; DXP-IOM, 2812; DXP-SDR, 2814, DXP-2PID, 2816; DXP-OCR, 2818 Product Name Data Sheet Number Rev/Revision Date = _ _ IPF SeriesT"" Pull Stations 5000 1.0/7/1/2009 fPFIRE5ERIES" As Built Engineered Systems, Inc. Phone: (508)788-8333 ■ �� 1451 Concord Street Fax: (508)788-8334 �� I I� Framingham, MA 01701-7782 Contact: info(a�asbuiltes.com USA Visit: www.asbuiltes.com Engi�neered Systems OO Copyright 2008 AsBuilt Engineered Systems, Inc.