HomeMy WebLinkAboutF10-0082 011843 Cut-sheet Material Submittal_Mtn View Res #101
MIRAGE® QUICK RESPONSE CONCEALED PENDENT SPRINKLER SIN VK462 January 16, 2006 TECHNICAL DATA 1. PRODUCT NAME Viking Mirage® Quick Response Concealed Pendent Sprinkler SIN VK462† Sprinkler
Base Part No. 13503A Cover Plate Base Part No. 13504 Patents Pending † The Sprinkler Identification Number (SIN) is stamped on the sprinkler deflector. Available since 2006. 2. MANUFACTURER
THE VIKING CORPORATION 210 N. Industrial Park Road Hastings, Michigan 49058 USA Telephone: (269) 945-9501 (877) 384-5464 Fax: (269) 945-9599 e-mail: techsvcs@vikingcorp.com 3. PRODUCT
DESCRIPTION Viking Mirage® Quick Response Concealed Pendent Sprinkler VK462 is a thermosensitive glass bulb spray sprinkler designed for installation on concealed pipe systems where
the appearance of a smooth ceiling is desired. The sprinkler is pre-assembled with a threaded adapter for installation with a low-profile cover assembly that provides ½” (12,7 mm) of
vertical adjustment. The cover plate is available with a decorative polished chrome or white painted finish to meet design requirements. The two-piece design allows installation and
testing of the sprinkler prior to installation of the cover plate. The “push-on”, “thread-off” design of the concealed cover plate assembly allows easy installation of the cover plate
after the system has been tested and the ceiling finish has been applied. The cover assembly can be removed and reinstalled, allow-••• 175 °F and 200 °F (79 °C and 93 °C) temperature
rated sprinklers only. SPRINKLER MATERIALS Sprinkler Body: Brass UNS-C84400 Deflector: Copper UNS-C19500 Deflector Pins: Stainless Steel UNSS30200 Bulb: Glass, nominal 3 mm diameter
Pip Cap and Insert Assembly: Copper UNS-C11000 and Stainless Steel UNS-S30400 Button: Brass UNS-C36000 Compression Screws: 18-8 Stainless Steel Belleville Spring Sealing Assembly: Nickel
Alloy, coated on both sides with Teflon Tape Yoke: Brass UNS-C51000 Cover Adapter: Cold Rolled Steel UNSG10080, Finish: Clear Chromate over Zinc Plating COVER ASSEMBLY MATERIALS Cover:
Copper UNS-C11000 Base: Brass UNS-C26000 Spring: Nickel Alloy Solder: Eutectic AVAILABLE COVER FINISHES Painted1 White (No. 1004)2 or Polished Chrome 1 Painted finish consists of Polyester
Baked Enamel. 2 Sherwin-Williams® Color Answers™ Interior Color Number. ORDERING INSTRUCTIONS Viking Mirage® Quick Response Concealed Pendent Sprinkler SIN VK462 and Cover Plate Assembly
13504 must be ordered separately. Refer to: Sprinkler Base Part No. 13503A (includes sprinkler and adapter pre-assembled, with a protective plastic cap covering the unit). Specify sprinkler
temperature rating. Cover Plate Assembly Base Part No. 13504. Specify finish and temperature of the cover plate assembly. ACCESSORIES (order separately) Sprinkler Cabinet Part Number
01731A Capacity: five (5) sprinklers Available since 1971. Concealed Sprinkler Wrenches**: A. Heavy Duty Part Number 14047W/B Available since 2006, or B. Light Duty Part Number 14031***
Available since 2006. **Requires a ½” ratchet (not available from Viking). ***Optional for removal of the protective cap. Ideal for sprinkler cabinets. •• ing temporary removal of ceiling
panels without taking the sprinkler system out of service or removing the sprinkler. During fire conditions, when the temperature around the sprinkler approaches its operating temperature,
the cover plate detaches. Continued heating of the exposed sprinkler causes the heatsensitive liquid in the glass bulb to expand and the bulb to shatter, releasing the yoke, pip-cap
and sealing spring assembly. Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to extinguish or control the fire. 4. TECHNICAL
DATA LISTINGS AND APPROVALS Refer to the Approval Chart on pg 54 b. Glass-bulb fluid temperature rated to -65 °F (-55 °C). Thread Size: ½” (15 mm) NPT Nominal K-Factor: 5.6 U.S. (8,1
metric*, for use when pressure is measured in kPa). Metric K-Factor shown is for use when pressure is measured in kPa. When pressure is measured in BAR, multiply the metric KFactor shown
by 10.0. Min. Operating Pressure: 7 psi (48,3 kPa) Rated to 175 psi (1 207 kPa) water working pressure. Factory tested hydrostatically to 500 psi (3 448 kPa). Testing: U.S.A. Patent
No. 4,831,870 Available Cover Plate Vertical Adjustment: 1/2” (12 mm) maximum Requires a 2-1/4” (57,2 mm) diameter opening in the ceiling. Cover Plate Assembly Temp. Ratings: 135 °F
(57 °C) cover for use with 155 °F (68 °C) temp. rated sprinkler only. 165 °F (74 °C) cover for use with *•• Note: Units of measure in parentheses may be approximations. Form No. F_103005
New page 54 a-b, issued Jan. 16, 2006. Refer to technical data page QR1-2 for general care, installation, and maintenance information. Sprinkler 54 a Sprinkler and Adapter Assembly:
Base Part No. 13503A Cover Assembly: Base Part No. 13504 Viking Mirage® Concealed Sprinkler Installed in Acoustical Ceiling NOTE: Quick response concealed sprinklers must be installed
in neutral or negative pressure plenums only. NOTE: The 135 °F cover has an orange label; the 165 °F cover has a white label.
MIRAGE® QUICK RESPONSE CONCEALED PENDENT SPRINKLER SIN VK462 January 16, 2006 TECHNICAL DATA Sprinkler 54 b Sprinkler Temperature Classification Sprinkler Nominal Temperature Rating1
Maximum Ambient Ceiling Temperature2 Bulb Color Temperature Rating of the Required Cover Assembly Cover Plate Assembly Base Part Number4 Ordinary 155 °F (68 °C) 100 °F (38 °C) Red 135
°F (57 °C) Intermediate 175 °F (79 °C) 150 °F (65 °C) Yellow 165 °F (74 °C) 13504 Intermediate 200 °F (93 °C) 150 °F (65 °C) Green 165 °F (74 °C) Approval Chart Mirage® Quick Response
Concealed Pendent Sprinkler VK462 Sprinkler Base Part Number4 SIN NPT Thread Size Nominal K-Factor Maximum Water Working Pressure Overall Length (Sprinkler Body) Listings and Approvals3
Inches mm U.S. metric5 Inches mm cULus6 FM NYC VdS LPCB 13503A VK462 1/2 15 5.6 8,1 175 psi 1 207 kPa 2-3/16 55,6 AW1, BX1 --------Sprinkler Temperature Ratings A -155 °F (68 °C) B -175
°F (79 °C) and 200 °F (93 °C) Cover Plate Assembly Temp. Ratings W -135 °F (57 °C) X -165 °F (74 °C) Finishes of the Cover Plate Assembly 1 -Painted White or Polished Chrome Footnotes
1 The temperature rating is stamped on the sprinkler deflector. 2 Based on NFPA-13. Other limits may apply, depending on fire loading, sprinkler location, and other requirements of the
Authority Having Jurisdiction. Refer to specific installation standards. 3 This table shows the listings and approvals available at the time of printing. Other approvals may be in process.
Check with the manufacturer for any additional approvals. 4 Base part number is shown. For complete part number, refer to Viking’s current price list schedule. 5 Metric K-factor shown
is for use when pressure is measured in kPa. When pressure is measured in BAR, multiply the metric K-factor shown by 10.0. 6 Listed by Underwriters Laboratories, Inc. for use in the
U.S. and Canada. New page 54 a-b, issued Jan. 16, 2006. Refer to technical data page QR1-2 for general care, installation, and maintenance information. Form No. F_103005 Figure 1 Sprinkler
and Adapter Assembly (Protective cap is removed for installation--use Wrench 14031**) Step 1: Carefully slide the wrench sideways around the deflector and pins. 2-1/4” (57,2 mm) diameter
opening is required in the ceiling Sprinkler Wrench (Part No. 14047W/B** is shown) Step 2: Carefully press the wrench upward and turn slightly to ensure engagement with sprinkler wrench
flats. Figure 2 **A ½” ratchet is required (not available from Viking). 2-3/4” (70 mm) maximum 2-1/4” (57,2 mm) minimum 2-3/4” (70 mm) 1/2” (15 mm) NPT 2-3/16” (55,6 mm) NOTE: Upon sprinkler
activation, the deflector descends to approximately 13/16” (20,6 mm) below the sprinkler body.
Engineered to provide greater value and reduced costs in threadable applications. • Wheatland’s Mega-Thread offers an inside diameter which is 3.6% larger than Schedule 40. This results
in improved hydraulics and opens the door to down-sizing when used in conjunction with Wheatland’s. • Safer to weld than many zinc-coated lightwall threadable products. • Wheatland’s
Mega-Thread threads smoothly and easily and requires no thread warning. • The proprietary mill coating on Wheatland’s Mega-Thread extends shelf-life and eases paint application. • Offering
increased strength and light weight, Wheatland’s Mega-Thread helps reduce installation fatigue. • Approved for standard hanger spacing, Wheatland’s Mega-Thread can be used as earthquake
sway bracing. • More widely accepted than lightwall threadable where Schedule 40 is specified. Wheatland’s Mega-Thread is quality manufactured to meet or exceed the following standards:
• ASTM: A-795 Type E, Grade A • NFPA 13 • UL Listed for wet, dry and preaction sprinkler systems. • FM Approved for use in wet systems. • Hot-dipped galvanized Mega-Thread meets FM requirements
for dry systems. • Rated 300 psi working pressure. Mega-Thread The High Quality Alternative to Schedule 40 Sprinkler Pipe Schedule 40 strength and dependability. Better hydraulics and
value. Specifications NPS Nominal O.D. Nominal Inside Diameter UL CRR* Wheatland'sMega-Thread MegaThread Sch. 40 MegaThread Sch. 40 L.W.T. Pipe Nom.Wt./Ft. Pcs/Lift 1 1.315 1.087 1.049
1.00 1.00 .61 1.462 70 1 1/4 1.660 1.416 1.380 1.00 1.00 .39 1.989 51 1 1/2 1.900 1.650 1.610 1.00 1.00 .31 2.370 44 2 2.375 2.117 2.067 1.00 1.00 .25 3.094 30 * Calculated using Standard
UL CRR formula, UL Fire Protection Directory, Category VIZY * The CRR is a ratio value used to measure the ability of a pipe to withstand corrosion. Schedule 40 steel pipe is used as
the benchmark (value of 1.0). Approved for all threaded couplings and welded outlets and is suitable for all roll-grooved and plain-end fittings. Specifications and descriptions are
are accurate as known at time of publication and are subject to change without notice. Wheatland’s Features and Benefits Specification and Approvals Wheatland Tube Company 0207 1.0Mrev02
1 Council Avenue, P.O. Box 608 Wheatland, PA 16161-0608 Ph 800.257.8182 Fax 724.346.7260 www.wheatland.com
�
� �
�
�
�
Page 13 Mechanical branch connections for reducing branch outlets without welding. The MT-1 is a bolted saddle type fitting with NPT female threaded outlets. Design assures superior
sealing, full pipe support, excellent stability and easy installation All sizes may be used as mechanical crosses. Threads are NPT per ANSI/ASME B1.20.1 MECHANICAL TEES For fire protection
services request submittal GRS 1.3 * Contact Star Pipe Products for actual listings on specific pipes MT-1 THREADED MECHANICAL BRANCH TEE NOMINAL MAX. HOL E AP P R OX. S IZ E WOR K ING
D IA . WE IGH T IN. P .S .I./+.125/-0.0 QT Y . S IZ E A B C D E E ACH (mm) (kP a) IN. (mm) Lbs.(Kg) 2x1 300 1.50 2 3/8x2 2.62 1.58 4.62 2.47 1.96 1.70 50x25 3450 38 67 40 117 63 50 2.8
2x1 1/4 300 1.75 2 3/8x2 2.62 1.58 4.62 2.47 1.94 1.70 50x32 3450 44 67 40 117 63 49 0.8 2x1 1/2 300 1.75 2 3/8x2 2.62 1.58 4.62 2.86 1.94 1.70 50x40 3450 44 67 40 117 73 49 0.8 2 1/2x1
300 1.50 2 1/2x2 3/4 3.12 1.83 5.56 3.38 2.46 3.60 65x25 3450 38 79 46 141 86 62 1.6 2 1/2x1 1/4 300 2.00 2 1/2x2 3/4 3.12 1.83 5.56 3.38 2.44 3.60 65x32 3450 51 79 46 141 86 62 1.6
2 1/2x1 1/2 300 2.00 2 1/2x2 3/4 3.12 1.83 5.56 3.38 2.44 3.60 65x40 3450 51 79 46 141 86 62 1.6 3x1 300 1.50 2 1/2x2 3/4 3.44 2.15 6.25 3.91 2.78 3.80 80x25 3450 38 87 55 159 99 71
1.7 3x1 1/4 300 2.00 2 1/2x2 3/4 3.44 2.15 6.25 3.91 2.76 3.80 80x32 3450 51 87 55 159 99 70 1.7 3x1 1/2 300 2.00 2 1/2x2 3/4 3.44 2.15 6.25 3.91 2.76 3.80 3x2 300 2.50 2 1/2x2 3/4 3.44
2.15 6.25 3.91 2.74 4.40 80x50 3450 64 87 55 159 99 70 2.0 3 1/2x2 300 2.50 2 1/2x2 3/4 3.88 2.46 6.62 3.92 3.18 4.60 4x1 300 1.50 2 1/2x2 3/4 4.00 2.65 7.25 3.83 3.34 4.60 100x25 3450
38 102 67 184 97 85 2.1 4x1 1/4 300 2.00 2 1/2x2 3/4 4.00 2.65 7.25 3.83 3.32 4.60 100x32 3450 51 102 67 184 97 84 2.1 4x1 1/2 300 2.00 2 1/2x2 3/4 4.00 2.65 7.25 3.83 3.32 4.60 100x40
3450 51 102 67 184 97 84 2.1 4x2 300 2.50 2 1/2x2 3/4 4.00 2.65 7.25 4.52 3.30 4.80 100x50 3450 64 102 67 184 115 84 2.2 4x2 1/2 300 2.75 2 1/2x2 3/4 4.00 2.65 7.25 4.52 3.07 5.40 100x65
3450 70 102 102 67 184 115 78 2.4 5x1 1/2 300 2.00 2 5/8x4 4.75 3.18 8.30 3.83 4.07 6.93 125x40 3450 51 121 81 211 97 103 3.1 5x2 300 2.50 2 5/8x4 4.75 3.18 8.30 3.83 4.05 7.48 125x50
3450 64 121 81 211 97 103 3.4 5x2 1/2 300 2.75 2 5/8x4 4.75 3.18 8.30 3.83 3.82 7.61 125x65 3450 70 121 81 211 97 97 3.5 6x1 1/2 300 2.00 2 5/8x4 5.12 3.71 9.38 3.86 4.44 7.50 150x40
3450 51 130 94 238 98 113 3.4 6x2 300 2.50 2 5/8x4 5.12 3.71 9.38 4.42 4.42 8.00 150x50 3450 64 130 94 238 112 112 3.6 6x2 1/2 300 2.75 2 5/8x4 5.12 3.71 9.38 4.42 4.19 8.00 150x65 3450
70 130 94 238 112 106 3.6 NUT S /B OL T S (INCH ) DIME NS IONS -Inch/mm 80x40 3450 51 87 55 159 99 70 1.7 90x50 3450 64 99 62 168 99 81 2.1 UL or FM MAX. * 8x2 2 3/4x4 1/4 200x50 300
3450 2.50 64 6.25 159 4.83 123 12.32 313 4.48 123 5.55 141 11.60 5.3 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065 2065
Mechanical Anchoring Systems 4.3.8 HDI & HDI-L Drop..ln Anchor 4.3.8.1 Product Description 4.3.8.1 Product Description 4.3.8.2 Material Specifications The Hilti HOIIHOI·L Drop-In anchor
is an • Intelligent expansion section 4.3.8.3 Technical Data adapts to the base material and reduces number of internally threaded, flush mounted 4.3.8.4 Installation Instructions expansion
anchor for use in concrete. hammer blows up to 50% (HDI-L) 4.3.8.5 Ordering Information Product Features HOI • Anchor, setting tool and Hilti drill bit form a matched tolerance system
to provide reliable fastenings • Below surface setting for easy patchwork • Allows shallow embedment without sacrificing performance • Lip provides flush installation, consistent anchor
depth, and easy rod alignment (HOI-L) • Lip allows accurate flush surface setting, independent of hole depth (HOI-L) • Ideal for repetitive fastenings with threaded rods of equal length
Guide Specifications Expansion Anchor Expansion anchors shall be flush or shell type and zinc plated in accordance with ASTM 8 633, SC 1, Type III. Anchors shall be Hilti HOI/HOI·L anchors
as supplied by Hilti. Installation Install shell or flush type anchors in holes drilled with Hilti carbide tipped drill bits. Install anchors as per manufacturer's recommendations. 4.3.8.2
Material Specifications HOIIHOI-L, 1/4",3/8",1/2", and HOI 518" and 3/4" are manufactured from mild carbon steel which is plated with a zinc finish for corrosion protection in accordance
with ASTM B 633, SC 1, Type III Listings!Approvals HOI Stainless Steel material meets the requirements of AISI 303 ICC·ES (International Code Council) ER-2895 (HOI Only) COLA (City of
Los Angeles) 4.3.8.3 Technical Data Research Report No. 23709 (HOI Only) FM (Factory Mutual) HOI/HOI-L Specification Table Pipe Hanger Components for Automatic Sprinkler Systems (3/8"
-314") (HOI and HOI-l) UL (Underwriters Laboratories) UL203 Pipe Hanger Equipment for Fire Protection Services (3/8" -314") ( Nd )5/3 (Vd N + V )5/3 :s 1.0 (Ref. Secti.on 4.1.8.3) rec
rec 252 Hilli. Inc. (US} 1-800-879-8000 I www.us.hilti.com l en 1-800-879-5000 I Hilll (Canada) Corp. 1-800-363-4458 [ www.ca.hiUI.comIProduct Technical GUide 2006
HDl/HDI·L HOI Size in. 114 3/8 112 5/8 3/4 Details (mm) (6.4) (9.5) (12.7) (15.9) (19.1) dbil Bit diameter1 in. 3/8 112 5/8 27/32 1 hnom Std. depth of embed. in. 1 1·9/16 2 2-9/16 3-3/16
e Anchor length (mm) (25) (40) (51) (65) (B1) h1 Hole depth f U1 Useable thread in. 7/16 5/8 11/16 7/8 1-3/8 length (mm) (11) (15) (ll) (22) (34) Threads per inch 20 16 13 11 10 h min.
base material in. 3 3·118 4 5-1/8 6-3/8 thickness (mm) (76) (79) (102) (130) (162) Tm"" max. tightening ft-Ib 4 11 22 37 80 torque (Nm) (5.4) (149) (29.8) (50.2) (10B.5) 1 For HIIlI
malched tolerance carllide tipped dnlllllls, see seclion 8.4.1. Combined Shear and Tension Loading
HOI & HDI-L Drop-In Anchor 4.3.8 Carbon Steel HOI Allowable Loads in Concrete Anchor size 2000 psi (13.8 MPa) 4000 psi (27.6 MPa) 6000 psi (41.4 MPa) in. (mm) Tension Ib (kN) Shear Ib
(kN) Tension Ib (kN) Shear lb (kN) Tension Ib (kN) Shear lb (kN) HOI HOI-l HOI HDI-l HOI HOI-l HOI HDI-l HOI HDI-l HOI HDI-L 1/4 ( 6.4) 500 ( 2.2) 500 (2.2) 450 ( B.OI 450 (8.0) 570
{ 2.5) 57012.51 625 ( 2.8) 625 (2.8) 790 ( 3.5) 790 ( 3.5) 700 ( 3.1) 700 ( 3.1) 3/8 ( 9.5) 890 ( 4.0) 890 (4.0) 965 ( 4.3) 965 (4.3) 1115 ( 5.0) 1115 (5.01 1250 [ 5.6) 1250 (5.6) 1360
( 6.0) 1360 ( 6.0) 1500 ( 6.7) 15001 6.7) 1/2 (12.7) 1120 ( 5.0) 1120(5.0) 1500 ( 6.7) 1500 (6.7) 1785 ( 7.9) 1785 (7.9) 2125 ( 9.51 1940 (8.6) 2345 (10.4) 2345 (10.4) 2500 (11.1) 2500
(11.1) 5/8 (15.9) 1875 ( 8.3) -2500 (11.1) -2920 (13.0) -3250 (14.5) -3715 (16.51 -3750 (16.7) -3/4 (19.1) 2500 (11.1) -3875 (17.2) -4065 (18.1) -5000 (22.2) -5565 (24.8) -5500 [24.5}
-Note: The ullimate sllear and allowable shear values are based on the use of SAE Grade 5 bolls. (fy =85 ksi. F"II = 120 ksO with the exception of the 1/4" HDVHDI-L in I'e =6000 psi
concrete Which is based upon the use of aSAE Grade 8 bolt (fy= 120 ksi, F"" = 150 ksO. Carbon Steel HOI Ultimate Loads in Concrete Anchor size 2000 psi (13.8 MPa) 4000 psi (27.6 MPa)
6000 psi (41.4 MPa) in. (mm) Tension Ib (kN) Shear Ib (kN) Tension lb (kN) Shear Ib (kN) Tension Ib (kN) Shear Ib (kN) HOI HDI-l HOI HOI-l HDI HDI-l HOI HDI-L HOI HDI-l HOI HDI-l 1/4
( 6.4) 1995 ( 8.9) 1995 ( 8.9) 1800 ( 8.0) 1800 ( 8.0) 2270 (10.1) 2270 (10.1) 2500(11.1} 2500 (11.1) 3150 (14.0) 3150 (14.0) 2800(12.5) 2800 (12.5) 3/8 ( 9.5) 3555 ( 15.8) 3555(15.8)
3850(17.1) 3850 (17.1) 4460 (19.8) 4460 (19.8) 5000 (22.2) 5000 (22.2) 5430 (24.2) 5430 (24.2) 6IllIO 126.7} 6IllIO (26.7) 1/2 (12.7) 4470 (19.9) 4470(19.9) 6IllIO (267) 60IllI (26.7)
7140(31.8) 7140 (31.8) 8500 (37.8) 7750 (34.4) 9375 (41.7) 9375 (41.7) 1011110 (44.5) 00IllI (44.5) 5/8 (15.9) 7500 ( 33.4) -00IllI (44.5) -11685 (52.0) -13000 {57.B) - (66.1)
-15000 (66.7) -3/4 (19.1) 1011110 ( 44.5) -5500(69.0) -16260 (72.3) -21Jl11Jl1(89.0) - -22000 (97.9) -Carbon Steel HOI Allowable Loads in Lightweight Concrete and Lightweight
Concrete over Metal Oeck1,2 3 The tabulated shear and tensile values are for anchors installed in slructurallightweigl1t concrete having the deSignated ultimate compressive strength
at the time of installation. The concrete must comply with ASTM C330-77. 4 The labulated shear and tensile values are for anchors Installed through 20 gauge intermediate decking into
structurallightweighl concrele having the designated ullimate strength at the lime of installation. The concrete must comply with ASTM C330-77. AnChor Anchor Installed in 3000 psI (20.7
MPaJ Anchor Installed Through Steel Deck Upper Flute Anchor Installed Through Steel Deck lower Flute Size It Wt Concrele3 Into 3000 psi (20.7 MPa) It. WI. Concrel04 Into 3000 psi (20.7
MPa) Lt. WI. Concrete4 in. (mm) Tension, Ib (kN) Shear, Ib (kN) Tension, Ib (kN) Shear, Ib (kN) Tension, Ib (kN) Shear, Ib (kN) 1/4 (6.4) 465 (2.1) 340 (1.5) 530 (2.4) 335 (1.5) 375
(1.7) 250 (1.1) 3/8 (9.5) 755 (3.4) 940 (4.2) 880 (3.9) 1010 (4.5) 500 (2.2) 500 (2.2) 1/2 (12.7) 1135 (5.0) 1700 (7.6) 1105 (4.9) 1755 (7.8) 625 (2.8) 750 (3.3) 5/B (15.9) 1465 (6.5)
2835 (12.6) --875 (3.9) 875 (3.9) 3/4 (19.1) 2075 (9.2) 3680 (16.4) --1250 (5.5) 1000 (4.4) 1 The allowable values are based on the use of SAE Grade 2 bolls installed in the anchors.
2 Based on using asafety factor of 4.0. Stainless Steel HOI Allowable Loads in Concrete Anchor size in. (mm) 4000 psi (27.6 MPa) 6000 psi (41.4 MPa) Tension Ib (kN) Shear Ib (kN) Tension
Ib (kN) Shear Ib (kN) SS HDI-1I4 6.4) 480 2.1) 600 (2.7) 740 3.3) 600 2.7) S8 HDl-3/8 9.5) 1040 4.6) 1230 (5.5) 1460 6.5) 1230 5.5) S5 HDI-1/2 12.7) 1840 8.2) 2760 /12.4) 2410 10.7)
2760 12.3) SS HOI-SIB 15.9) 2630 11.7) 4510 (20.1) 3770 16.8) 4510 20.1) SS HDI-3/4 (19.1) 3830 (17.0) 5580 (24.8) 5030 (22.4) 5580 (24.8) Note: The ultimate and allowable shear values
are based on the use ofType 18-8 bolts. Stainless Steel HOI Ultimate Loads in Concrete Anchor size in. (mm) 4000 psi (27.6 MPa) 6000 psi (41.4 MPa) Tension lb (kN) Shear Ib (kN) Tension
Ib (kNl Shear Ib (kN) SS HDI-1/4 6.4) 1930 8.6) 2400 10.7 2950 13.1 2400 10.7 SS HDI-3/8 9.5) 4170 18.5) 4920 21.9 5850 26.0 4920 21.9 SS HOI-1/2 12.7) 7350 32.7) 11040 49.1 9630 42.8
11040 49.1 SS HDI-SIB 15.9) 10540 46.9) 18040 80.2 15100 67.2 18040 80.2 SS HDI-3/4 (19.1 ) 15340 (68.2) 22320 (99.3) 20130 (89.5) 22320 (99.3) Hilli. Inc. (US) 1-800-879-8000 I www.us.hilli.com
I en espaiioI1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.ca.hilti.comIProduct Technical Guide 2006 253
-----Mechanical Anchoring Systems 4.3.8 HOI & HDI-L Drop-In Anchor Anchor Spacing and Edge Distance Guidelines (See Anchoring Technology Section 4.1.3) N Anchor Spacing Adjustment Factors
Edge Distance Adjustment Factors 3.0 2.0 s hnmll 1.0 o s = Actual Spacing c = Actual edge distance sm,n = 2.0 hncm cm,n = 2.0 hncm scr = 3.5 hncm Ccr = 3.0 hncm Scr ccr Influence of
Anchor Spacing & Edge Distance fA' fR Smin 3.0 2.0 c hntlm 1.0 o o .2 .4 .6 .8 1.0 o .2 .4 .6 .8 1.0 Edge Distance Adjustment Factor Anchor Spacing Adjustment Factor (IRV, fn.) (fA)
hnM, = standard embedment depth Anchor Size hncm in. (mm) in. (mm) 1/4 (6.4) 1 (25) 3/8 (9.5) 1-9/16 (40) 1/2 (127} 2 (51} 5/B (15.8) 2-9/16 (65) 3/4(19.1) 3-3/16 (81) LoadAdjustment
Factors (Anchor Spacing) fA Load Adjustment Factors (Edge Distance) fR Tension/Shear Loads Tension, fRN Shear, fRY Spacing Anchor Diameter Edge Distance Anchor Diameter Anchor Diameter
s c in. (mm) 1/4 3/8 1/2 5/B 3/4 in. (mm) 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4 2 ( 51) .50 I 2 ( 51) .80 .65 I 2-1/2 ( 64 .67 2-1/2 ( 64 .90 .83 3 ( 76 .83 .50 3 ( 76 1.0 .80 1.0
.65 I 3-1/2 ( 89) 1.0 .58 3-1/2 ( 89 .85 I .73 4 102) .69 4 (102 .91 .80 , .50 .85 .65 4-1/2 (114 .79 .58 I 4-1/2 (114 .98 .85 I .96 .74 5 (127) .90 .67 .50 5 (127) 1.0 .90 .80 I 1.0
.83 .65 5-1/2 140 1.0 .75 .55 5-112 (140 .95 .83 .91 .70 6 152 .83 .61 .50 6 (152 1.0 .87 1.0 .77 7 178 1.0 .74 .57 6-1/2 (165 .91 .80 .84 .65 a 203 .87 .67 7 (178 .95 .84 .91 .72 9
229) 1.0 .77 8 (203) 1.0 .90 1.0 .83 10 (254) .88 9 (229 .96 .94 11 (279 .98 10 (254 1.0 1.0 12 (305) 1.0 8m,n = 2.0 hnom' Scr =3.5 hnom cm,n = 2.0 hnom' c" = 3.0 hnoOl COlin = 2.0 hnom,
C" = 3.0 hnom fA = 0.33 _S_ -0.17 = 0.2 C + 0.4 fAY = 0.35 C -0.05 hnom hnom hnoOl for 5er> S> smin for c,,> C > cmlO lor CCr > C > Cmin 254 Hiltl.lnc. (US) 1-800·B79-BOOO I www.u9.hilti.com
I en espaiioll-BOO-879-5000 I Hilt; (Canada] Corp. 1-800-363-4458 I www.ca.hllli.com I Product Technical GUide 2006
Mechanical Anchoring Systems HOI & HDI-L Drop-In Anchor 4.3.8 4.3.8.4 Installation Instructions 1. Adjust depth gauge so that anchor will be flush willI the concrete surface when Installed.
2. Hammer drill hole. 3. Clean hole. 4. Install anchor using proper setting 1001. Selting tool to De driven into anchor until setting 1001 shoulder meels top of ancllor. 4.3.8.5 Ordering
Information HOI Anchors Anchor Carbon Steel Stainless Steel Box Qty Thread Size Description Item No. Description lIem No. Description Item No. 1/4" HOI 1/4 336425 HOI-L 1/4 283608 HOI
1/4 (55 303) 336430 100 3/8" HOI 318 336426 HOI-L 3/8 283609 HOI 3/8 (55 303} 336431 50 1/2" HOI 1/2 336427 HOI-L 1/2 283610 HOI 1/2 (55 303) 336432 50 5/8" HOI 518 336428 --HOI 5/8
(55 303) 336433 25 3/4" HOI 314 336429 --HOI 3/4 (55 303) 336434 25 Setting Tools for HOI & HOI-L Anchors Anchor Thread Size Description Manual Setting Tools Item No. 1/4" HST 1/4 Setting
Tool 00032978 3/8" HST 318 Setting Tool 00032979 1/2" HST 1/2 Setting Tool 00032980 5/8" HST 5/8 Setting Tool 00032981 3/4" HST 3/4 Setting Tool 00032982 Anchor Thread Size Description
Automatic Setting Tools1 Item NO. 3/8" HSD-MM 3/8" (TE-C-24SDl 03/8" Setting tooQ 00243751 1/2" HSD-MM 1/2" (TE-C-24S0121/2" Setting tool) 00243752 1 Use automatic selling tools with
TE-5A, TE-6, TE·15, TE·16, TE-16C, TE-18 and TE-25 rotary hammer drills. Hilti, Inc. IUS) 1-800-879-8000 I www.us.hllli.cam I en espanal 1-800-879-5000 I Hilt; (Canada) Corp. 1-eOO-363-4458
I www.ca.hilli.cam I Product Technical GUide 2006 255
OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330 CUSTOMER SERVICE • 800.786.5266 www.tolco.com 70 www.tolco.com ™® a brand
of Revision 8/15/2005 Size Range — Secures 3/8" thru 7/8" hanger rod Material — Carbon Steel Function — Secures channel to hanger rod for vertical seismic bracing. Approvals — Underwriters
Laboratories Listed in the USA (UL) and Canada (cUL). Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development
(OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint Systems Guidelines Finish — Electro Galvanized
Note — Available in HDG finish or Stainless Steel materials. Order By — Figure number Fig. 98 -Rod Stiffener Fig. 99 -All Thread Rod Cut to Length Size Range — Secures 3/8" thru 7/8"
rod in 1" increments Material — Carbon Steel Maximum Temperature — 750°F Finish — Plain Note — Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By —
Figure number, rod diameter, rod length and finish Fig. 100 -All Thread Rod Full Lengths Size Range — Secures 3/8" thru 7/8" rod in 10’ lengths Material — Carbon Steel Maximum Temperature
— 750°F Finish — Plain Note — Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By — Figure number, rod diameter and finish Dimensions • Weights Rod
Max. Rec. Load Lbs. Size For Service Temps 650°F 750°F 3/8 610 540 1/2 1130 1010 5/8 1810 1610 3/4 2710 2420 7/8 3770 3360 Dimensions • Weights Max Rec. Load Lbs. Rod For Service Temps
Approx. Size 650°F 750°F Wt./100 1/4 240 215 12 3/8 610 540 29 1/2 1130 1010 53 5/8 1810 1610 84 3/4 2710 2420 123 7/8 3770 3360 169 1 4960 4420 222 11/4 8000 7140 360 11/2 11630 10370
510 Component of State of California OSHPD Approved Seismic Restraints System
Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92879 • Ph: 951.737.5599 • Fax: 951.737.0330 Customer Service • 800.786.5266 www.tolco.com 90 www.tolco.com Revision 5/24/2001
™® a brand of Fig. 200 -“Trimline” Adjustable Band Hanger Size Range — 1/2" thru 8" pipe Material — Carbon Steel, Mil. Galvanized to G90 specifications Function — For fire sprinkler
and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation. Features— • (1/2" thru 2") Flared edges ease installation for all pipe types
and protect CPVC plastic pipe from abrasion. Captured design keeps adjusting nut from separating with hanger. Hanger is easily installed around pipe. • (21/2" thru 8" Spring tension
on nut holds it securely in hanger before installation. Adjusting nut is easily removed. Approvals — Underwriters’ Laboratories listed (1/2" thru 8") in the USA (UL) and Canada (cUL)
for steel and CPVC plastic pipe and Factory Mutual Engineering Approved (3/4" thru 8"). Conforms to Federal Specifications WW-H-171E, Type
10 and Manufacturers Standardization Society SP-69, Type 10. Maximum Temperature — 650°F Finish — Mil. Galvanized. For Stainless Steel materials, order TOLCO™ Fig. 200WON. Order By —
Figure number and pipe size Dimensions • Weights Pipe Rod Size Max. Rec. Approx. Size Inch Metric A B Load Lbs. Length 1/2 3/8 8mm or 10mm 31/8 25/8 400 11 3/4 3/8 8mm or 10mm 31/8 21/2
400 11 1 3/8 8mm or 10mm 33/8 25/8 400 12 11/4 3/8 8mm or 10mm 33/4 27/8 400 13 11/2 3/8 8mm or 10mm 37/8 27/8 400 14 2 3/8 8mm or 10mm 41/2 3 400 15 21/2 3/8 10mm 55/8 41/8 600 27 3
3/8 10mm 57/8 4 600 29 31/2 3/8 10mm 73/8 51/4 600 34 4 3/8 10mm 73/8 5 1000 35 5 1/2 12mm 91/8 61/4 1250 66 6 1/2 12mm 101/8 63/4 1250 73 8 1/2 12mm 131/8 83/4 1250 136