HomeMy WebLinkAboutB10-0196 NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL T/MES
.�
�ow�o�v�, '
Town of Vail, Community Development, 75 South Frontage Road,Vail, Colorado 81657
p. 970.479.2139, f. 970.479.2452, inpsections 970.4792149
ADD/ALT COMM BUILD PERMT Permit #: B10-0196
Project #:
Job Address: 181 W MEADOW DR VAI L Status. . : ISSUED
Location......: WMC Applied . . : 07/29/2010
Parcel No....: 210107101013 Issued. .. : 02/04/2011
Expires. ..: 04/10/2011
OWNER VAIL CLINIC INC 07/29/2010
IN CARE OF VAIL VALLEY MEDICAL CENTER
PO BOX 40000
VAIL
CO 81658
APPIICANT VAIL VALLEY MEDICAL CENTER 07/29/2010 Phone: 970-476-2451
181 WEST MEADOW DR SUITE 100
VAIL
CO 81657
License: 107-A
CONTRACTOR VAIL VALLEY MEDICAL CENTER 07/29/2010 Phone: 970-476-2451
181 WEST MEADOW DR SUITE 100
VAIL
CO 81657
License: 107-A
Description:
RENOVATION OF EXISTING BIO MEDICAL LAB
Occupancy: Valuation: $1,120,000.00
Type Construction: Total Sq Ft Added: �
........................................,.........,...«..........,,..,,...,....,... FEE SUMMARY .......x...,�......,.............�..,.....,...............,..,..................
Building Permit Fee------> $6,046.75 Will Cal Fee---------------------> $4.00 Total Calculated Fees-------------> $32,291.14
Plan Check--------------------> $3,930.39 Use Tax Fee---------------------> $22,200.00 Additional Fees-----------------------> ($1.00)
Add'I Plan Check Hours-> $110.00 Restuarant Plan Review-----> $0.00 TOTAL PERMIT FEES-------------> $32,290.14
Investigation-----------------> $0.00 Recreation Fee-----------------> $0.00
Payments------------------------------> 532,291.14
Total Calculated Fees--------> $32,291.14 BALANCE DUE-----------------------> ($1.00)
..................................................................,...,.......�....,.......,.....x.,......,...�.�.,..,,,�,....,..,...................................,..............,...
DECLARATIONS
I hereby acknowledge that I have read this application,filled out in full the information required,completed an accurate plot plan, and state that all the informatior
as required is correct. I agree to comply with the information and plot plan,to comply with all Town ordinances and state laws,and to build this structure
according to the towns zoning and subdivision codes,design review approved, International Building and Residential Codes and other ordinances of the Town
applicable thereto.
REQUESTS FOR INSPECTION SHALL BE MADE TWENTY-FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM
8:00 A.M—4:OQrPM✓'
.,. , �,. � ��
�� gnature of Owner or Contractor D te
� _.�—..
�C�C � Q-L'�''
rint ame
b I d_a It_co n st r u ct i o n_pe rm it_041908
♦twi�fRkwwwwff**���hfwwwFR��#�Mwwkwww*�����1wwRwf*#�4#fwww�k*��w*ww+w*1ff#wwwww**���ww�wk����*kwwwwRhfA*��fRwwRw�fk��wtwf�xRkwwww�ffR##Mwwwfxxlkwwwwf���www*�lkAkwwwxx��wxw�/�ffxkww•
APPROVALS
Permit#: 610-0196 as of 02-04-2011 Status: ISSUED
..�....,.,�.,>.......>...............................................................................�.,..,,...x.........,................,.,.,....,....,....,......x,.,....,........
Item: 05100 BUILDING DEPARTMENT
08/30/2010 cg Action: AP
Item: 05400 PLANNING DEPARTMENT
08/02/2010 bgibson Action: NA No change to net
floor area. Design review approval is required for any
new, or changes to the existing, exterior mechanical
systems. Plans routed to G-5.
Item: 05600 FIRE DEPARTMENT
08/10/2010 McGee Action: CR The following
items need to be addressed:
1. AR1.0 Conference Room corridor must remain open.
Protect elevator from dust due to potential false
alarm.
2. A 1.0 Plans appear to indicate windows to the
corridor. Clarify and provide ratings and details.
3. A 9.0 Provide information on intended use of machine
shop relative to hazardous processes (metal grinding,
lathe, welding, etc..)
4. M 1.0 Duct smoke detector must be tied into FACP
5. M 1.1 Provide information on use of space beneath the
hood and hazardous chemicals or processes.
6. M 1.2 Duct smoke detectors are required in RF-11,
EF-11 and AHU-11.
7. E 0.03 Section 16535 1.2 B battery packs are allowed
for em lighting only until the emergency generator comes
on. Emergency lighting shall be tied into the emergency
generator.
Fire alarm specifications call for continuous operation.
Submit plan to mitigate potential for false alarms.
8. E 5.01 Fire detection coverage as submitted is
inadequate. Full coverage is required per Town of Vail
adopted codes and standards. Re-submittal is required.
Manual pull stations shall be located at each level of
each exit. Relocate manual pull ststion from mid-corridor
to stairway entrance.
End of review
09/30/2010 mcgee Action: DN Waiting for
response on assessment of fire sprinkler system from
contractor.
Plans may be approved upon letter from applicant
commiting to evaluiation and re-work of fire sprinkler
system.
10/08/2010 mvaughan Action: AP
b I d_a It_co n st ru ct i o n_pe rm i t_041908
Item: 05101 BUILDING DEPT REVISION
01/17/2011 Martin Action: AP Revision to 2 hour
fire wall
..........................�..........,....................................,.,..........,.........,........,....,.......,..................,,...............,,...............,...,..,.
See the Conditions section of this Document for any that may apply.
b I d_a It_co n st ru ct i o n_pe rm i t_041908
......<.,..�...............�...........�..........,...........,...........,.xx,...,...,..,.,,............,...............,..,........,...,...,........,..............,,,,..,.........
CONDITIONS OF APPROVAL
Permit#: 610-0196 as of 02-04-2011 Status: ISSUED
..�..,x...,,..,�...,...,x......�....................................«,.>......�..,...........,,.,.........w�......,,,x x...,x,.....,......»............�......,,.....,..................
Cond: 1
(FIRE): FIRE DEPARTMENT APPROVAL IS REQUIRED BEFORE ANY
WORK CAN BE STARTED.
Cond: 12
(BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE
COMPLIANCE.
Cond: CON0011544
Design review approval is required for any new, or changes
to the existing, exterior mechanical systems.
b Id_a I t_co n st ru ct i o n_pe rm it_041908
*****�+*******************************************************************************�*****
TOWN OF VAIL, COLORADO Statement
****************************************************************************************+***
Statement Number: R110000088 Amount: $110 .00 02/04/201102 :52 PM
Payment Method:Credit Crd Init: SAB
Notation: MC-BRICE
JACKSON
-----------------------------------------------------------------------------
Permit No: B10-0196 Type: ADD/ALT COMM BUILD PERMT
Parcel No: 2101-071-0101-3
Site Address: 181 W MEADOW DR VAIL
Location: WMC
Total Fees: $32,291.14
This Payment: $110.00 Total ALL Pmts: $32,291.14
Balance: $0. 00
****+******�***********************************�********************************************
ACCOUNT ITEM LIST:
Account Code Description Current Pmts
-------------------- ------------------------------ ------------
PF 00100003112300 PLAN CHECK FEES 110.00
-----------------------------------------------------------------------------
�� `\' Department of Community Development
�� , 75 South Frontage Road
- Vail, Colorado 81657
�� Tel: 970-479-2128
�� � �� � Fax: 970-479-2452
���� '.�
_ ��� z��� Web: www.vailgov.com
�� � �
,��,��� � °� , � �� � Development Review Coordinator
�a��g �;,.f{d ��.��d P..� . ^��� . .
TRANSMITTAL FORM
Revision Submittals:
1. "Field Set"of approved plans MUST accompany revisions.
2. No further inspections will be performed until the revisions are approved&the permit is re-issued.
3. Fees for reviewing revisions are$55.00 per hour(2 hour minimum),and are due upon issuance.
Permit#(s)information applies to: Attention: (�)Revisions
610-0196 Mr. Martin Haberly � ) Response to Correction Letter
attached copy of correction letter
( )Deferred Submittal
( )Other
Project Street Address:
181 West Meadow Drive Description/List of Changes:
(Number) (Street) (Suite#) Change of 2 hour rated fire/smoke barrier to a 2 hour
Building/Complex Name: Vail Valley Medical Center rated fire barrier only.
Contact Information:
Company: Davis Partnership Architects
Company Address: 0225 Main Street, Unit C101
City: Edwards State: CO ZiP:81632
Contact Name: Chandler Deimund
Contact Phone: 970-926-8960
E-Mail cdeimund@davispartner.com
Revised ADDITIONAL Valuations(Labor 8�Materials)
(DO NOT include original valuation)
BUilding: $ 0.0� (use additional sheet if necessary)
Plumbing: g 0.00
Date Received:
Electrical: $ 0.00
� I r� LI V �
Mechanical: $
o.00 D � r1, i �
Total: g 0.00 JAN 0 4 2011
rown� oF vai�
� 01-Jan-10
�
; _.. . _
�
j
� Job Name: �o�a.,ti �k:�bo� K�3�,r���rs�,'�+�-
�� Job Address: 1�"1 .1,.9. (�,r�el.c4� 1�.1 `
,;
T�WNOFYAi� Permit No.: �l�- UI R�
I
= SPECIQL INSPECTION AND TESTtNG AGREEMENT �
; (To applicants of projects requiring Special Inspection or Testing per Section 9701 of the IBC)
The owner or his/her representative, on the advice of the design professional in responsible charge, shall
camplete, seal, sign and submit a copy of the Special Inspection Agreement and Structural Tests
Scheduled to the Town of Vail for review and approval. Signatures are required an both pages;
' photocopied or faxed signatures are acceptable.
The owner and hislher general contractor, where applicable, shall also acknowledge the folfowing
conditions applicable to Special Inspection Testing:
1. Contractor is respansible for proper noti�cation to ihe Inspection or Tes#ing agency for items
listed.{Page 1) (IBC 1704}
2. Only the testing laboratory should take samples and iransport them to their laboratory.
3. Copies of all laboratory reports and inspections are to be sent directly to the Town of Vail by the Testing
agency on a weekly basis.
4. Inspection agency to submit names and qualifications of on-site special inspectors to the Town of Vail
for review and approval.( Page 2)
� 5. The special inspector is responsible to immediately notify the Town of Vail Building Q�cial in writing of
= any concerns and/or problems encountered.
6. It is the responsibility of the contraclor to review the Town of Vail approved plans for additional
inspection or testing requirements that may be noted. A pre-constructio� conference at the job site is
recommended to review special inspection procedures.
' 7. The special inspector shall use only the 7own of Vail approved drawings.
8. Al! special inspection field reports must be left on site for review by the Town of Vail staff prior to
required inspections or re-inspections.
; BEFORE OCCUPANCY WILL BE GRANTED: The special inspection agency shall submit a signed and
seaEed statement that all items requiring tesiing and inspection were fulfilled and reported. 7hose items not
� tested and/or inspected shall be noted in this statement. A copy of the statement shall be maintained at the
� job site for the Building fnspectors review prior to final inspection.
f Acknowledgemen �
Owner: �'/� / G ( D /' d
S' Print Name -J�
Special Inspection ` �� . N./ _�_�f �('} 1 Z l�
Agency: ��S � �r�� �� /
Signat Print Name Date
Project
Arch/Eng:
S' Print Name Date
� �
' Contractor: ��l�"�-�GL's��� �(
rgnature Print Name D te
;
�
i
� ^
i
�j
i
t
�
� ._ _. . . __... _ . .
; . ._._.__ . . _ .....�.__. ...� .. _ . .__ ....
� _ _..___-----___... _
. _.__._._..___..____�__�.______...__.�.
�
; '
� _
�
y
;
' .I0�7 N0i'ri@: �l1�tY�t.,� ��i�Ii{et►e.�i�l.' +FT�►�YC-
� � �
i .({lt}!�cld�@SS: !�"f .�l. (�t�e�tt3 �l
} �V��� � Pe�►nit�io.: �,�t�� ?C���'+�,•
'
€ _
; 3PEGIAL l[VSPEGTiON AND TESTING AC�REEMENT
;` _ : �To apPti�ac�ts of�pt�ajects requiring Spe�i'iaJ lnspe�tit►n r�r Testing per Se�tifln 97�D1 of tF�e IBC)
; The tn�mer o!' his/t�e�'.1'�presat�ta�,ve,on the ad�ice,crf-the de�ig�;Professional in r�sponsibie cfiarge, shall
; ecxmplete; s�a#, :�'tgn and submiti a .copy of the ;Special ln�pection Agreement �rnd Structural Tests
' Scheduled to :the 7oWn..c�f �at� for ce�i�w and appc�val. Sign�uces are: nequire€f o,n both pages;
; photacopied or faxed signatures are ac+�p#abfe.
"fhe o�►mer and hislt�er .geoeral c�ntractar, where. applicable, shall also ��kno�rledge #he f�allowir�g
i condit#on��ppiicable#a`Spec�a!'lnspecfion Testing:
' 1. C+ontr�tar is res,ponsi�l� for pr�tper �otification to the lnspectit�n o� T�ti�g agency far iterns
� ���� Gsted.(Pa�e,1) �(iBC'I��#}� � � �
2: 4n1�#he testing:l��ta�shouEd talte samples and transpo�t them fo their�abor�tory.
:, 3. �opi�s of,ait�latic�ratary.reports anc�inspecfPons are#c�be sent directly'to fhe Tc�uvn of Vait by the Testing
� � a��ncy art�tnr�k��b�s�s. �� ' � � �
Y 4. �r�sp��car�a�en�y#q r�u�uni�nam�s arni qu�i��catic�ns-�fi�a�-site speciai insper,tcus;to the 7own ofi.�ail
for rev►��€�nd approwat t Pa�e 2� , '
f 5. Tti�s�a(iiasp��tvt`�s�#spbn�lble ta,�mrrieciiately notify##�e 7ctwn of.uail Building�fficial in writing of .
an}�cc�nct�rrts.at�i�'c?t pcolatet�is�ncountered..
': ;6. , It Js. the �r�spo�ibttii�.bf tki� .cx�ntr�ator to"revi�w the Town, of Vai(,approved,ptans f�r adciifronal
,, insp�ivn �r te��g.reqtiicerrter�ts:ttt�t may be ciotied. A pr�-co�structiQn conf�r�n�e at#he�ob aite is
r�comtn+ended.tca i�eview-s��iaE ir��t�ecfian pr�cedures,
�. T�re�s�ci�kitt���cto��h�l!�tset�r�l�;�'te Tcr�r�o#llail approved�d�avv�ng�. � �
8. }��I speaeE in�e�tion fiefd„�eports rryus# ki� left an site far review by tt�� Tc�wn,of Vail staff pr+Qr.to
'i ��ciuiir+�ct�nsp�ction�or re-inspec#ior�s,
���OR� �CGUF,t�NGY Wt;LL,BE GRANTE�: The.;�peraal inspection agency shalt submit a signed and _
' ; seal�d,staternentt3�at aill it�rr�s,teqinrin9:test�ng and inspection uvere fulfilfed.and.repprted: 7ht��ilems t�ot
! tes#ed,a�dfor inspeG�-s�aH�be,noted it�t�is st�temer�#. .A�py of tk�e statement sFrat�.be mgintaine�l a�tlie
; - .., _ ,
; joa:stte€vr the Btiild�g.lrtsp��t�r's f�view pr�ar to#'inal inspe�ii�n. , �
� AGknr��rledg�rn�n
r
; ' � ��/ � .li �
t7wner. . - ...:.
, �=
, . ,• Print NdRte DaCe
; $p2�ClaI II1Sp�tOR
' ' flqer�ejt:_ _ ,:
; _ ' . . Ptlnt h�err� D'ate `
Project ' �1��1,�.�_ Bob Redwine oct 11/ 2blo
�tCCft�Eng:_ �'!� Cfg#e
Pc'sn#�,tarne
•..---
���� �' ���� �
, C�rrtractoc• _,�,.: . =s" lt s
� ,�natur� �sm nrame �
_
� '
; _
; ,
;
� ; , :, _ _
f
�
S . . � ' �� .:,. . �. . � � . ..
t . . .���. .. .
+
{ ��i �� ' $P�CtAL tl+[S�'EGTi�N At�II�"�S"�1NG SCHEf?k1t;E
� � � � � (t�G 1T0�) � � � �
;
Project t+ka�e. � � Permit#��d� ����.
.n1h1C1f�iF'$NtZITiP.: �t+MS •/� �' �
Testin lns eation . s ��'e��� f�
. 9 R :
% Agen�:y:
3esting lnspe�#ian s�ngn,re ��m Hame �ce
� Hereby csrtiiies that tbe Testingllnspection Agency n�metl abave has been engaged to perform struckural tests-and
; insp�c:tivns durir�construct�orl as ch�cke�f belaw,tcr satisfy alt ap{�licable portians of th.e;Bui(�i�g Co�da
� l�rior tp fmal inspectior'�, the Inspedion Age{tcY shall submit 8 st�terrtent that all items o#designateel wurk performed
� kvere reported, 1��►y ifems checked but not tested o�inspect�d wilt ba noted artd ezpiained, Wherrevar ahy design�#ed
items.ar�ihe 11�#;are r�atl�for sa.mpltpg. t�&ting, ar tnsp�ioh, it shait be the responsiq�lity of the c�ntractor co gi�+e
tinsety notic�e to theinspectfon.agenay si�thatthe requi�ed�ervices nnay be'perfarmed.
REIN�ORClN{i�7EEl: UNDERPiNNING:
T4r►sile b�etid,o�e set per Meat per tons Temporary/Permanent
Inspection cif E�acerrtent tnspection of Steel Fabricatian
l�ispect�tt of W�Iding' InsPecticrn of#teir�Pw�cing 8 Forms
�pox!' ` Irtspec6on of Concrete Ptacemem
°; laspection af Tiebacks
i AA�1SffNRY:.
` AreGm.Acceptsnce;Tests{i�f�sOnry Un�ts,Wap:Pdsms) SQt�f�4411S:
� � �Subsequ�ntT�asts�Martar,C}rout,Ffa�4iWa�iftrisrrts} � � Femporary�Shflring
a Perman�nf Watt
; Inspection tsf�acemerit ar�d Crc)utfng; �-�.-.-
a CON�'FtE . SHUTCRETE GRUtlT ftNd MORTAR. STRUCTURAt.STEEL.
; G ta. St�ot .Grouf Mwiar . Sampie 8�Test(List speaFic memfaers beloaar)
�9re9ate tas� desi�� Shop Idetttifica4on$�:1N�iriing inspeclion
; �►�#abiNtyarap reos� Sh�sP UltrascMicir►spection,
M6eDe�signs 9hcip Radit�graphy
' Tes4Pane1 ; � F�kl Welding Inspec3ion
88tr�Plantlnspec4a� F'�Id Bolting fnspection
�nontGr�bSampte; F"jeld Eltkrasonfc In�pectioo
Mspect Plac�t9 Field Etadiography
, p.e t Matal Qeck UVelding inspecGon
i Can !on Taata
, , '_ Ca�t.Sp�dm�s ��l2EPFtC10FING;
' P�'�'P�'''� ,_ InSpeCtlon&PlaCemem
: ; Sh�ink�e Bara :
! Yis�i Ch. .: SOIL.�:
Air Citiedc: _ i4cceptance"I'ests
Dry iJnitv�yht �Aoisture-[lensi#y beterminatfort
P GAST CON�R • F�id Dertsity
Reinfcrcing Tesis Dnlled Piets :
Jnspecstiorf of Reinfc�tcing Placement Deep Foundation
i Tendbn"fests
Inspection of Tandvn Rlat�rrsant STRUGi'UR1iL 1KOOD:
inspecttcn cf�Gartcreie Plac�m$nt Inspectlon of�abrica#ion
t�i�ppcitqn of Concc�be Batcfring Inspectian of Truss Joint�'abrication
(nspe�tion of Fatt�ai Htta�hinent�Irtserts Sampip 8�7'est Componenfis
Campressioti Ti�&!s Inspe+cFic�n vf�lu C.am�atsrication
tns�aectfan of Stressi�lTrar�sfer
"-""- _ SM6iC��ClN7ROL:
PFLIN��QA1S84NS,CAPSr�r�s: . .
fnspeokiono�Relnfiordrrg l�i�G�ment SPEi�tAL CASES:
lnspection of Cancrete Plaaemsnt :
3nspeCtbn of Gwtcxete Satc:h�ng . BPEGII4L INSPECTlON:
, 3e�smic Resistanee
'; SPecify othertest�inspeclro»s orspeciaJ instcuctlor►s requlred. . Wind Requirement�
;
k � � . . ... . .. . . . . . . . . .
? . . . .. . � ... . � � . . ... �� . � .
i
3 . . . . . . . . �. . .. .. . _
ip
1
�
�
_
xs _.. ._ , _
___.._. _......._ __. ..... .._ �. _
;
;
�
�
.
q ;.
TOWNOFYA�L '
REPORT OF SPECIAL INSPECTIONS
' Project: s PQS �.a� Permit Number: ��� ' 0��L
s
Project Location: �g � t� ���a.� �
Owner �0.�� �Ci.�,�(,. �1-�'.�� �� -
� T �
t
Address 1�l� � ��+'�er.v�� City: �� Zip: ��
Registered Design Professional nEl �2�GTv��}L
In Responsible Charge: ��
Address: 1�S�I �QOi4D�,/�}y Sc/I'fE 2��
City: Q��/✓E2 State: C� Zip: ���Phone: �3's75- 4510
Fax: �3"57�` 95l s E-maii:
This Report of Special Inspections attached is submitted as a condition from permit issuance in
accordance with Section 1704 International Building Code. It includes a Schedule of Special Inspection
; Services applicable to the above referenced project as well as the identiry of the individuals, agencies,
; or firms intended to be retained for conducting these inspections. The Special Inspector(s) shall keep
records of all inspections and shall fumish interim inspection reports to the registered design
professional in responsible charge at a frequency agreed upon by the permit applicant and building
F official prior to the start of work. Discrepancies shall be brought to the immediate attention of the
contractor and design professional in responsible charge for correction. If the discrepancies are not
; corrected, the discrepancies shall be brought to the attention of the building official by the registered
� design professional in responsible charge prior to the completion of that phase of work. A Final Report
of Special Inspections shall be submitted by the design professional in responsible charge to the
building offcial at the conGusion of the project and before a certificate of occupancy will be issued.
Prepared by: �pQ R C ,
Bob Redwine ,o��:�'g'�F��
Print Name V, ��t�
. �/73673 ;�
/��� �,p� �71- ':o
�nature ����'"
October 12, 2010 ' , •
�AL E1'�
Date
Preparer's Seal and Signature Required
To be filled out by the jurisdiction and returned to applicant
Building Official's Acceptance of Special Inspections
Frequency of Interim reports: Monthly Bi-Monthly Upon Completion
Per Attached Schedule
{
Signature Date Permit Number
a
—10—
�
,
�
f
�
., .. , .,. .._ _ _ _- _� . .. r`���ti��.������.a . ... ,', � _ �^" ar �
-- - _ ` .p�.�v�o� Jv�l� . . . _ -
� � ��
� ��� �-`-�.--��.._-------
. ��_._. ---- —.______�___--_- -------------
�r_ ____ .__ __ _ _ ____. _.
� .� E "� ,� # t: a. , �,�` e� �_D�'� ��:....1:-� x._� I
9���:�t���..st �ts.�rad+� �r�u:�:-�r ...r ._:t-�s.����:.�.; , ,_� �� —!,�
E�..��l,i�Tt7R PE�'it+�I t kk�'��..i%.,�����1°�t°! ( '��r,�,'�7- �'t'�,�..�s�°�
,-• - ;..rorr,[�'�-�.�c�?_1�.1'.�'�
_ � - _
f ;
. Ji � � /D�--� � '� _ j
Permit :-� �_i�=3. �_._.__------ ��lr�sdicti�� ��+:. c ,� �- l ;"�:x:`
,. ;- -
_ -- ;.G.L f_-r--._ _---------- `
Tota) Pee R:��,'. vu Jate �a�d ���- ���, Ft'a:°� * " ._-.�?� _ ._ ;`_'k�. f y ;" �;e' --_._�
— -�------ ' .
/� � , ...�.�.._.._.�_--------
Pian Reviewed and Appraved bY_-C.�-��-�:����__ ��:'s.� �ssu��i ._`'��'_�3..1.rC�-.------- j
,._ .n..,
�'hts secftor�„ta t�e�cam�l�te�l:b�'N�LC?QG Per�r�:L �:ct�;r�t.ir.,;� �,-3i:e---d`��?�i��'�t...'__.___...
.� -� •
�� '` Ati t�t�: �':1Plov�ric�y �r�us� be c:otr�pi�:�t� i�y. .,�.� ct,��:�i:�� c;rar�r;:����r �
tnaccur��te, iP(e�ible �ar m►ssiny irt�armation v�ri�l raca:��: � c�±=:C.;� s�� �:#�e�,���fif°��:i,zrt �pr�c�ss.
P(r'dSL' GG(�?p�°�E ? S°�dlai�' �n i�.:t r` ,�^( _ "'Ct�.
]urisdictlan Buitding �erm?t -. ._..._._,. � � � � r '____--_
,,� �
7ob Address � � e. �� -t-��-; .,�r � .. _ � �...� � _. �
_____ .___ __� _- '- _-r-.
�
Owner ; .: � .L_ _. ! :�, � '� __�-'�� �'.�r_ .'�':����_,-,r_ - -----____... -_ _____
— - -- -- --- - --
_ ,�_ „
M�ilir.g Address t.5 a._ -�-- :-� ..''�.y�� �� � �� _. _.� __,_ .,------
, � ,
—__ _�_------� _._.__,____,._, __.. .._. ,_ �._._ _ .
,
Phcrc �- � s --_....,._.---�-------�- Fax � ..T....�..._.�..___._..__.._._..._._,__
_- ,��,
E(evatur Caritractor �_::_._Y,,. --��- � , " _._----.- ._<- - .�_�.__..___._.. ____—�
i �\ ...-Y '`_ 1 "1 `.j � .',.
,'`�d!l:n�Addruss �� �� � - � , ' � ..__ ._.__ � �_c - 'i�
�� ___..:s.. �"'"'"'` �� Y__�i_ _.�,_t----°--_r:. __._._ , _
Phon� n `�,c�� -�-�, i - � � �, Fax � _ ._ ;... . _, . _._` �_____. .__._..------
�---- - — -- -�...__. .._._. __ __ _. __. .._ _ �,
I#� �P�I7'11�5�2JC 1:t: t(7 Qtl2 ear for new�nsta�64� :1! a �C'eL' st :7i;>c ��Iti iG 3�4.:f'dLSURS a=ii
�
.
:..,._-.�_.. _. ._-- ---- __ . .. _-- -------- Y_.�.�___�._. .. ___ _ .. ._ __._. _ ..__.. ._.....
; �� �Vew Insic�4Zaiion i. 1i�ar CantracE�._�`�.�=�_`,�_!�_-,...__...___._..
, A�f:eratio» (unftr.�anr,�thc returnedtos�.�vice ut1�'%!ir;��;jc�..r,��-t��r•��r��r3vecf�;�,�,".�C'�'�G)
�
: ;
Destrlhe'Nark � �- -� �� ,- � �-F �• �,I � ..- ' � .____._. __._.----- --.__— `
. , � r � .. �'- ,. ..
,.•_.�____:_- _____L.,..�_L._:___ r�c, ,_
---=-------__.___.�-- -_ _ _.
------ . .... _. _....�_......_ _- - ___._�,__,.......,..,.�.»�_...�.m_ �-',-1 ,(�
_ .. _,___... ....._,... ___ ..._...__..__.._.�....._..
._...
(\r„�'j"��� t.i:t: _!��i 1��L1�i ilJ�d �-C�5
?he:eoy ces�Jy:ra}I hav..re..� :�r : �Yam;ned this applica;iun P2$SE'.^.r�-:r o 1*�_!K h�e��.�E��2u , �>b1`3�,es:a�afcr,mvving�valk:
3�i�i �CfICW:f72 53"12 t�}7c L U:: a',:i Cft'?(':, rlil�7;'C:V{=iflfl�a��2WS i:.l±ll :"'.1 :, �.:!rl_; � ,!�'' :;�.:.};�riC'., ... t�')G,�1(�
an� ordi��nce� �ov�rn;ng thls type; �1`�,�ark rv;ll �2 ca^�pliPd v��;th Gvt f:r. ,r .- - '.,,, ��. . '' 1� ,C�,*or eacr
r �-;:i;�C r .a f ^! � - .�; !,,:..� � }, �r� r� . �.:�
v.tie:her�;._. _ herelr, � nc�. �I . araEing o. a p:: m:t does . r t ,k';: s�.�•^. . +.. _
flv��:f�SU{�I�fv t3i�P.allt�'iC�IfV i:t� ..:'c�E 01":=3!l�"� fllc. 7f0'/�SlvilS
OT el'�y G:fl� �dCF C1C�GCr3��?Vv i'°y^U�dr.i�g c.�.n�rtl'C;�1�7i; :)i Cilc� �.lit;, �J4.liTl�J43� z.3f+li'['f�l� � C'^' z'� cCF' .�v��3Yor;
per��_�r.l� .,c:f�0�^C'I:CC1Ca.^., i�_^"� h:: ;nC.t,_.la 3'�� J.;-��„ ,�;�,���.r . e���,fG
, : ... .,
' . � i �_'"J� � C'� f ! �'f� - +�Ji> >. 7`�I�y..!,��+0 PU�`Q<i'_i�
� �
�c:.j- ` �—I_� !r � (n � t o Vy"1 �) r }::1 .?'.(`Lt'� " �f � �'�u,rr.,.:� ,
,...,._ .
� s:�"UFra'�rn,r,�spnw ,e ?",r z•-�r°�ac+ti ,,, 7��w3i"-T
��bl �a'u'�'rUiti3 ��+a aJ t'�Ll:�i .id v f � :1 '�
_�s�..�...�»�::..r:�_1�'_._��y..ii �
�'�,�.!!t�''..�i�,�f.�:�iiOPs 1=�:��`��
� � Z_�i'� I �C.t } :I L f � _. �..''.. '',l �.:LIc'J'A O�Lf1P_
T14����;�.7a�+:e L��� �� '��� �T� .9 a7��r�s�� --- I _ r �� �r + .. ..�.,�� .�.(7 l�.. :. �,.
� �'?�k��, .ci {'� ,l...a4-t,.r.. I :�,.o. �c�:�.ii��a.t_
��� s�., - �,, , ,>" " ; Vf1��,1�T7�?N.r...'.�':+''...�.�....__.'..�''w..�..._.._.. _.
Isw ,� ,� � , F�i�YP•��E�: 7,s�� � ,��� , �'����'.
r} ( ; ,�
, ` �
_ � " (
�+"Cr t Li t r �,. � � � I L ' { ( �__- ------- - _-__.,.�..._.__.
,
1 � �! ' k 1 � I 1�/�{.xi.� ��� 1 � ♦ ``�:
� � ,� _'. � � �( i`�� '�k J 4 � �. . . .
��CLP'7��' r+ rc T' F -I 1 ',I� I __It : : i
�°(`, f a:. � .�, � � �� i i�+^'I ,
� i ,_ � `f r `:t �� .
� s ,; rs:� �a � � ��� ° �' ���I�''�I
i, ' ;`
� I�r
�.1
I y 1'�' '._I � � _� '. , r , ;,r.... .
x, i I
� z ; ;
i�r- , r i,'' i
s I
I� I
�,c�{ :_z :.,i . �?' ..i . S.. a>.,°-� '°.. .. . ..� q�.'
. _...�_ _.__. __ . _- - _.. .._.. ..... .. ... . . ._. .__ _. . _..... .. . ._ . ... ... ... _.. . ..__ . .._._.__._ ._.._ __-_..--�--
Cr�eVdtC!' D��11 f2�"1E1�: dil�� IE,! �7.nc'�_��'�R� �NI1; E'E (U"1CIU_�..Ci �)y �_tla Nprlli�.°if t,+7��Ccar1�' �C+L:R.,I Oi(�01°�"1!Yl?�''S. PIc��G WI��
be �c� ,�.ar.E-;,' te i�1'JCC�G for r.��iew�:nd �p�rovG:. _�lie��fe ,nspec,�, ; ��� c�r���c � c r;-,e ��1��;C:C�_� E;�v�;.or I�specro- at I
� 9��-4(,S-C23� 2�' 1,O�i. i
� —
u
:�
�
s
.s
NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL TIMES
3
� ,�
�owxo�vn¢ �
� ��
Town of Vail, Community Development, 75 South Frontage Road,Vail, Colorado 81657
� p. 970.479.2139, f.970.479.2452, inpsections 970.479.2149
' ADD/ALT COMM BUILD PERMT Permit #: B10-0196
�
� Project #:
:
= Job Address: 181 W MEADOW DR VAIL Status. . : ISSUED
� Location......: WMC Applied. . : 07/29/2010
s
Parcel No....: 210107101013 Issued... : 10/12/2010
Expires. ..: 04/10/2011
� OWNER VAIL CLINIC INC 07/29/2010
IN CARE OF VAIL VALLEY MEDICAL CENTER
� PO BOX 40000
� VAIL
� CO 81658
; APPLICANT VAIL VALLEY MEDICAL CENTER 07l29/2010 Phone:970-476-2451
� 181 WEST MEADOW DR SUITE 100
VAIL
� CO 81657
� License: 107-A
� CONTRACTOR VAIL VALLEY MEDICAL CENTER 07/29/2010 Phone: 970-476-2451
� 181 WEST MEADOW DR SUITE 100
� VAIL
; CO 81657
� License: 107-A
� Description:
� RENOVATION OF EXISTING BIO MEDICAL LAB
?
� Occupancy: Valuation: $1,120,000.00
� Type Construction: Total Sq Ft Added: 0
; .................................................................,...,,.........,. FEE SUMMARY =....,.........«....,............,.....,..........,.,.,....,,....,..........,..,
; Building Permit Fee----> $6,046.75 Will Cal Fee------------------> $4.00 Total Calculated Fees--------> $32,181.14
� Plan Check-------------> $3,930.39 Use Tax Fee--------------------> $22,200.00 Additional Fees----- -----> $0.00
� Add'I Plan Check Hours-> $0.00 Restuarant Plan Review----> $0.00 TOTAL PERMIT FEES--------> a32,181.14
� Investigation-----------> $0.00 Recreation Fee---------------> $0.00 `
� Payments-- -----------> a32,181.14
; Total Calculated Fees--------> $32,181.14 BALANCE DUE ---------a 50.00
� #ttYi(RY4##!!f/f4frf�fflrlrVRlfRfiFfY(##t�f4iht44R44VV1rRfffiFYrikY4f+tHtlrR1r1M1R1fVflrRff�ky'4y'##N�i#�dtrllRltRR�rrtRtkMkt'Rf*kIr4�RatRVihtfi4ViRiRT4fYr�R�ll#}4Afffr#fVRfrffRfeYnttky'iYr#iRfrtt44/##ffRf'�VHVRfYfYYrtt�kt
A
DECLARATIONS
y� I hereby acknowledge that I have read this application,filled out in full the information required,completed an accurate plot plan,and state that all the information
as required is correct. I agree to comply with the information and plot plan,to comply with all Town ordinances and state laws,and to build this structure
� according to the towns zoning and subdivision codes,design review approved, International Building and Residential Codes and other ordinances of the Town
� applicable thereto.
�
j REQUESTS FOR INSPE ON SHALL BE MADE TWENTY-FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM
� 8:00 AM-4:00 P
; �U /Z /u
Sig re of Owner or Date
� � �- �
3 -�
Print Name
r
s
c bld_alt_construction�ermit_041908
�
a
i
;
»
7 ft�tlrR4RfeYHY'4fRk}tfR�f4'RR44k}�RffYfA#f}�!}RRrtfY�Rf#f'f'ffrfr�kM/##4RfV#ffii#/�!}ARihFkYey'i`444fftrhkflRttff4f1r1rRNrt'kt+t�#lRfRffrYYffl#4fANfYY4f/�f`AfVff.rtfil�frtel�f�YYtl�k'k4fRf1VV4fA'fVY`4Hfwxfxf'YfYYHf!
�
� See the Conditions section of this Document for any that may apply.
�
�
� �
� �
s
;
S
S
t
't
1
i
i
M
i'
4
'i
�
F
$
k
! bld_alt_construction�ermit 041908
;�
� � � ���� �� � � ���
� n/��.�.�E'� "` t e �,'S � �� �' � �'� �: t3 r ��, �, _ma��"
�' ;.fr � � �. r� ��,�� � _.�� � �� � f e ��" : � �� _ :'� ,r �� �
� ` +���„ ���,�:��� � �� �� �w,.. � � �" � � � �" , k. � r x ��
�� � � � � � ��. !� � � �;���,r
� � �:�` �� � � �� p ritr�i i��of,� r`r�muni#y `�:�;� dpmer���
° ' �,
��,a, ������` � �� �.„, ' ��°s � � .�` � � 5 S�cruth Fr�ntagc'
���➢ ,q R ��p � .: _ ' ���• �Y.
{ 'r.. �v. ry , �: � 9 e.*_.• �4
� � 4
YTI.'�I��Yf �11� �, 'F �a� � o_ylN � 'i� .� �, �'as$� ffE
�s �`" T��4. "x R � � �. F�,�.
� �' � ��... �"��6� '�� ��k�� �q� -.���.L m�
� g �� ,�`
f „4� �.Rt p' .fm� � ���,Y� .. {�ry .,� #y
i ` K Q
�� �. ' . . �. , e. .
i .; �� > , .,. �➢1-" �_
� '��" . <,*��� M a � �e..�
� . �!�. e'�� E,a�` ,� �
!�
BUILDING PER
M
IT
APP
LIC
ATION
Separate permits are required for electrical, plumbing, mechanical, fireplace, etc. �
�
Project Street Address: ' Office Use. O
', ��( ('`� ` �y( — w '� L2,vG� Project#: 1 �O � �
,(Number) (Street) (Suite#) DRB#: �
�
Building/Complex Name: � Building Permit {
,.. ... •
Contractor Information: ' Lot#: BI ubdivisi •
Company: �,�IL ��l.c.F�i �Ci�iGd(c- ���
Company Address:_ �v� (,�.� /v�,�r.cfow (✓,�c uC `
Detailed Scope and Location of Work: �...�uv�T�v�J €
City: V dk I L State: C Zi � ' `
—� p: �S (�-� bt-' �+St��5 /�o - drI F�H.a�xcs �-r4 R
€
'Contact Name: _ ��Ib� �d�/LL �
Contact Phone: °17b ��j ?�?`j Q',p��� �
/ ,(use additional sheet if necessary) �
E-Mail 1vl�C'it�I Ca �/v� . f.p�
Work Class: �
Town of Vail C tor Registration No.:_ ��� � �
New( ) Addition ( ) Remodel(�) Repair( ) Other( ) ' �
X .. . . �` . _. �
Work Type �
Contract ignature(require Interior(1� O Both O e
, `) Exterior �
. _ . / _ �
Property Information Type of Building: �
Parcel#: ZIC�IO7�U(� �3 'Single-Family( ) Duplex( ) Multi-Family( ) ;
'(For parcel#,contact Eagle County Assessors Office at 970-328-8640 or �
visit www.eaglecounty.us/patie) Commercial(Y) Other( ) �
��
�' . . �
'Tenant Name:STF.d.,�i�t�t.,r� �H(l.Llr'�c�J (�crr�(n3TDoes a Fire Alarm Exist? Yes(xj No O F
Owner Name: V V �(� , Monitored Alarm? Yes(�Q No O ;
; Does a Sprinkler System Exist? Yes (� No O �
:
/.• ,
_ �
i Valuations(Labor&Materials) '#&Type of Existing Fireplaces: Gas Appliances C�-- : �
Gas Log � Wood/Pellet j� Wood Burning 6 �
Building: '� � ,, �: ' ,.
'#&Type of Proposed Fireplaces: Gas Appliances d
Plumbing: � n � Gas Log � Wood/Pellet a Wood Burning � �t
u�� :
Electrical:
�:
, ;
MechanicaL (including fireplace) $ Date Received:
TotaL• �
$ �, �ZO;OOp
�
4
. _ _ s.
_
�
e
k
k
15-May-10 �
�.
�
�
�
�
,
v��Fu�
�
�
�� ��R��`"LW°�s Vail Fire Department
Asbestos Testing &Abatement Requirements
Asbestos testing and abatement protects workers, homeowners, neighbors and emergency services responders from ex-
posure to harmful asbestos. The Town of Vail asbestos abatement program is in addition to the State of Colorado's regu-
lations. It is your responsibility to be in compliance with the State. Please contact the State directly for their requirements
at the contact info listed below.
When is asbestos testina reauired?
ANY building projects disturbing more than these threshold levels of building materials require asbest6s tQSting:
One-and Two-Family Dwellings: 32 square feet
All Others (commercial spaces, hotel rooms, etc): 160 square feet
Definition of a single-family dwelling: any dwelling unit that is used primarily for a single family, including
multi-family/condominium units, and fractional fee units.
�
Asbestos testing results must be provided with your application for a building permit. �
�
Tests which identify POSITIVE results at more than 1% require abatement by a State-certified and Vail-registered abate- �
ment contractor. An asbestos abatement permit must be approved, and the clearance letter must be submitted to the �
Town of Vail before the building permit will be issued. �:
r
f
Project Checklist '
My project falls into the category checked below: �
� Will not disturb more than the threshold limits identified above. �
�
�Tested negative, or at 1% or below 1 co ies of te
� p st results included) i
� Tested positive at more than 1%, requires abatement (1 copies of test results included `
) �
Tips&Facts: �
• Even recent construction projects may include asbestos-c . �
ontainmg materials, so buildings of�age require testing.
• The "1989 Ban" on asbestos-containing materials is commonly misunderstood. "In fact, in 1991 the U.S. Fifth Circuit �
Court of Appeals vacated much of the so-called "Asbestos Ban and Phaseout" rule and remanded it to the EPA. Thus, i
much of the original 1989 EPA ban on the U.S. manufacturing, importation, processing, or distribution in commerce
of many asbestos-containing product categories was set aside and did not take effect." - CDPHE
Asbestos test results and abatement permit applications should be submitted to: Town of Vail, Community Development, �
75 S Frontage Rd, Vail, CO3 81657.
�
Town of Vail Contact: State of Colorado Contact: ``
Fire Prevention Bureau R
Colorado Department of Public Health �
Vail Fire Department and Environment
75 S Frontage Rd Asbestos Compliance Assistance Group �
Fire_inspectors@vailgov.com 303-692-3158
970-479-2252 asbestos@state.co.us
www.vailgov com www.cdnhe state co us
15-May-10
�
� �� r.
�
� ' ■
� ��
� ' -
�
a 1 Town of Vail
�
-
■ OPY
■ FIC� C
� 1
■
OF
� ■ ■ ■
. �
■
�
f ,
�
� '
� RT ERSHIP
3 PA N
ti �
� ARC H ITECTS
� i,-� .
��
I .
¢ � a�
�
� lle
�
a y
� � .
1
e �ca
� _
�
enter
� �
� ES EARC H LAB
; 1
SPRI R
�
�
' 1
PLUMBING FIXTURES
I -:
� 1��-=i�
� �
�
F1
�
{ �
�':��';: �" �,
f �� - �
; �� _ KOHLER�
�
� ,
= i�
Features BOWL
_ '^� . Vitreous china ��4368 �
. With bedpan lugs (-L)
� . 1-1/2" top spud ADA
* '� . 10" (25.4 cm) or i2' (30.5 cm) rough-in
. 2-1/4" (5.7 cm)passageway
� . 11-3✓8" (28.9 cm)x 10-3/8" (26.4 cm) water area o
�� . 77-1/2" (44.5 cm) high bowl is ADA compliant when e
an open front seat is installed �
. i.6 gpf(6 Ip� �
� . 26" (66 cm)x 14-1/2" (36.8 cm)x 17-1/2" (44.5 cm) �
� �— �
; Codes/Standards Appiicable �
�� Specified model meets or exceeds the foilowing: � �
. ADA
. ASME A 112.19.2/CSA B45.1 �
. ICC/ANSI A117.1 �
`s '� �
�
Colors/Finishes �
. 0:White �
. Other: Refer to Price Book for additional colors/finishes �
��<� Accessories:
� . 0:White
' � . Other: Refer to Price Book for additional colors/finishes
�
Specified Model
,; � Model � Description ColorsJFinishes
.•��' K-4368 Elongated bowl toilet ❑0 ❑Other
' K-4368-B Elon ated bowl toilet with 4 bolt holes in base ❑0
` � K-4368-L Elongated bowl toilet with bedpan lugs ❑0 ❑Other �
�
I
3 Recommended Accessories
� K-4654 LustraTM open front seat with support arms and cover ❑0 ,��'��� W��., �-
� K-4654-A Lustra open front seat with support arms and cover with ❑0 � �°'��� ,; �. '�
anti-microbial agent � ���� ,
K-4670-C Lustra open front seat ❑0 0 Other
� K-4670-CA Lustra open front seat with anti-microbial agent ❑0 �€ e���`�,,� ; �` �
'� �
; �
� �
Product Spec�fication �
? The elongated bowl shall be 10"(25.4 cm) or 12"(30.5 cm) rough-in with a 1-1/2"top spud. Bowl shall be made of vitreous �
� china.Bowl shall be 1.6 gpf(6 Ipfl. Bowl shalt have 11-3/8"(28.9 cm)6y 10-3/8"(26.4 cm)water area. Bowl shall have 2-1/4" �
(5.7 cm)passageway. Bowl shall be ADA compliant with 17-1/2"(44.5 cm) high bowl. Bowl shall have bedpan lugs(-L).Bowl �
E shall be 26" (66 cm) in length, 14-1/2" (36.8 cm) in width, and 17-1/2" (44.5 cm) in height. Bowl shall be Kohler Model �
j ._:_,� K-4368- -
�:�ii �
�•
' Page 1 of 2 USA/Canada: 1-800-4KOHLER �
° i12560-4-DD (1-800-456-4537}
,5 � www.kohler.com
�
h
�
� �
� r.
. g
�
; � �
! �
�
_ ,
Technical Information �
Included components: �
,, � ADA Spud 18357 �
, Fixture is ADA com liant. � golt cap accessory pack 52048 �
Fixture: �
� Configuration Top spud,elongated Installation Notes
i '� Water per flush 1.6 gal (6 L)" Install this product according to the installation guide. �
Spud size �-��" Refer to manufacturer and local codes for flush valve �
Passa ewa 2-1/4"(5.7 cm) requirements:for 12"(30.5 cm) rough-in, sweat extension �
Water area 11-3/8"(28.9 cm)x 10-3/8" nipple is required. �
r � (26.4 cm) �
Water depth from rim 6"(15.2 cm) �
Seat post hole centers 5-1/2"(14 cm) �
' � * Designed to flush with 1.6 gal (6 L)of water when �
installed with a 1.6 gpf(6 Ipf)valve. �
E �
� �
,; � �
�
�
� �
�
�
� �
;; �� �
27-5/8° (70.2 cm)or �
i � 29-5/8" (75.2 cm) �
�
2_y�4� 26" (66 cm) �
(5.7 cm) Min �
,E � �
�2 (5.1 cm)
, Front of Bowl '
6-3/8" 14-1/2" (36.8 cm) �
;', �� 1-1/2"SP�d �(16.2 cm) �
' 14-11/16" A
(37.3 cm) �
' � 17-1/2" �
(44.5 cm) � �� 5-5/8" �
� I (14.3 cm) �
'� e
r
\ 9-3/4" �
(24.8 cm) �
;, ��� ' �of Outlet �
10" (25.4 cm)or �
12" (30.5 cm) �
.� �
� j;
4 � Product Diagram �
; � HIGHCUFF,� Bow� THE BOLD LOOK �
;
1 560-4-DD O�ICOHLER. �
: � �
�
�
$ P
d�!: �� t. ��r � �
Sloan° Q PT�1 MA �
� ._, � � Model p� �
1 O P T i M A S Y S T E M S Battery Powered Flushometers �
,
� o o �
� � � o � � � � �
�
, i� �
� Description �
Exposed,Battery Powered,Sensor Activated,Sloan•Optima•Plus Model �
� � Water Closet Flushometer for floor mounted or wall hung top spud bowls. �
, 'i � FI h Cycle
r
'_: �Model 8111 Low Consumption(1.6 gpf/6A Lp� �
� ❑ Model 8110 Water Saver(3.5 gpf/13.2 Lp� �
y � � Variations • �
❑TP Trap Primer �
�DFB Dual Filtered Fixed B ass Dia hra m x
YO Bumper on Angle Stop(for open front seat without cover) �
- � � Specifications �
y Quiet,Exposed,Diaphragm Type,Chrome Plated Closet Flushometer for �
either left or right hand supply with the following features: €
• High Chloramine Resistant PERMEX'" Synthetic Rubber Diaphragm �
�� with Linear Filtered Bypass and Vortex Cleansing Action'" �� ±
• ADA Compliant OPTIMA Plus"Battery Powered Infrared Sensor for M�ae�, �
automatic"No Hands"operation RenewadeEnergy
'� • Infrared Sensor with Muftiple-focused,Lobular Sensing Fieids for high �
� and low target detection � ADA Compliant �
• Latching Solenoid Operator p
i • Engineered Plastic Cover with replaceabie Lens Window � Automatic �
• User friendly three(3)second Ftush Delay Sloan OPTIMA Plus•equipped Flushometers provide. �
� • Courtesy Flush'" Override Button the uftimate in sanitary protection and automatic
``•� • Four(4)Size AA Batteries factory installed operation.There is no need for AC hookups or wall �
• "Low Battery"Flashing LED alterations.The Flushometer operates by means of a
• Infrared Sensor Range Adjustment Screw battery powered infrared sensor.Once the user enters
+? � • Initial Set-up Range Indicator Light(first 10 minutes) the sensor's effective range and then steps away,the
• Chrome Plated Metal Handle Cap Flushometer Solenoid initiates the flushing cycle to
• 1"I.PS.Screwdriver Bak-Chek°Angle Stop flush the fixture. �
• Vandal Resistant Stop Cap �
, � • Adjustable Tailpiece � Hygienic �
• Vacuum Breaker with Flush Connection User makes no physicai contact with the Flushometer �
• Spud Coupling and Spud Flange for 1 Y2"Top Spud surface except to initiate the Override Button when
• Sweat Solder Adapter with Cover Tube and Cast Wall Flange required.Helps control the spread of infectious �
• High Copper,Low Zinc Brass Castings for Dezincification Resistance diseases. �
�� • No Extemal Volume Adjustment to Ensure Water Conservation � Economical
• Low Consumption Flush Accuracy Automatic operation provides water usage savings over �
�• Stop Seat and Vacuum Breaker Molded from PERMEX'" Rubber other flushing devices.Reduces maintenance and k
': �- Compound for Chloramine Resistance �
� • 100%of the energy used in manufacturing is offset with Renewable operation costs. �
� Energy Sources-Wind Energy � Warranty �
Valve Body,Tailpiece and Controi Stop shali be in conformance with ASTM 3 year(limited) �
� �i Alloy Class'rfication for Semi-Red Brass.Valve shall be in compliance with
� the appiicable sections of ASSE 1037,ANSI/ASME A112.19.2 and Military
� Specification V-29193.Installation conforms to ADA requirements. UL � Listed SP � Certified �
t:
, �t This space for ArchitecUEngineer approval `
i See Accessories Section and OPTIMA Accessories Section of the Sloan �
� catalog for details on these and other OPTIMA Plus"Flushometer dob Name �ate �
variations. �
�
I Model Specified �uantiry �
! t
_{ Variations Specified �
a
p
=�- Customer/Wholesaler ?
__:1�
'" Contractor �
, ��
Architect �
- Sloan Optima Plus 8110/8111 S.S.—Rev.Oa(08/07) The iniamation contaned in this document is subject to change withart notice. �
! � �
�
�
I
` �� � ,
�
; �� .
�
�
� . �
} . . K�HLER�
:: :� �
� . .
� �
Features COMMERCIAL TOILET SEAT �
�� . Elongated front K�4666 �
. Solid polypropylene plastic ALSO K-4667, K-4670, K-4672 �
. Open front ?
� �� . �thouf cover �
. With check hinge �
. �th anti-microbial agent(-CA and-SA only)
; . Stainless steel mounting bolts �
: � €
i
{ Codes/Standards Appiicable
Specified modei meets or exceeds the following: \ / �
¢ � . ANS!Z124.5
�
�
� �
x
�
t �� Colors/Finishes �
� . 0:White q
� . Other: Refer to Price Book for additional colors/finishes �
�
�� Specified Model �
Model Description Colors/Finishes �
' � K-4666-C Extra heavy elongated open front seat with check hinge, less cover ❑0 �
K-4666-SC Same as K-4666-C except with self-sustaining check hinge ❑0 �
K-4666-CA Same as K-4666-C except with anti-microbial agent toilet seat ❑0 �
K-4666-SA Same as K-4666-CA except with self-sustaining check hinge ❑0
K-4667-C Extra heavy elongated open front seat with check hinge, less cover 0 Other_ �
i � �
K-4670-C Elongated open front seat with check hinge, less cover ❑0 O �
Other_ �
�� K-4670-SC Same as K-4670-C except with self-sustaining check hinge ❑0 �
� K-4670-CA Same as K-4670-C except anti-microbial agent toilet seat ❑0 �
,,.►* K-4670-SA Same as K-4670-CA except with self-sustaining check hinge ❑0 �
K-4671-C Elon ated open front seat with check hinge, less cover ❑Other_ �
�� K-4671-SC Same as K-4671-C except with self-sustaining check hinge ❑Other_ �
K-4672 Elongated open front seat with self-raising hinge, less cover ❑0
K-4679-CA Same as K-4670-C except with anti-microbial agent toilet seat and 1"(2.5 cm) ❑0 �
hi h bumpers �
�+ K-4680-C Round open front seat with check hinge, less cover ❑0 �
r K-4680-CA Same as K-4680-C except with anti-microbial agent toilet seat O 0
K-4681-C Round open front seat with check hinge, less cover ❑Other_
�1 �
Product Specification �
� The toilet seat shall be elongated.Toilet seat shall be made of solid polypropylene plastic.Toilet seat shall be open in front.Toilet �
seat shall be without covec Toilet seat shall have check hinge and stainless steel mounting bolts. Toilet shall include an �
anti-microbial agent formed into the plastic which inhibits the growth of bacteria and germs on the toilet seat(-CA and-SA).Toilet
; =_= seat shall be Kohler Model K- - - �
'�s:� �
' � Pa e 1 of 2 USA/Canada: 1-800-4KOHLER
�
' 115726-4-AD (1-800-456-4537) �
' � www.kohler.com
�
�
� � �
; 1� �. �. - / �
. �
�-� �
� 1
� � �.�. KaHLER� �
1j-�:_ . _ �
d . . , �
� A
;, '� Features COUNTERTOP LAVATORY �
. Vtreous china K�22oz �
. Se/f-rimming �
; ��� . With overflow ADA �
. 8"(20.3 cm)centers (-8), 4'(10.2 cm)centers (-4), o� �
single-hole (-1) �
. ADA compliant when installed in a 21" (53.3 cm) �
� minimum depth countertop � �
. Optronal soap dispenser hole on leR(-L)or right(-R) �� �
� . 99" (48.3 cm)diameter �
� �
Codes/Standards Applicable �
' �"� Specified model meets or exceeds the following:
� . ADA �
. ASME A 112.19.2 �
r j . CABO/ANS!A 117.1 �
, '� . IAPMO/UPC �
. CSA lntemational �
Colors/Finishes �
. 0: White �
��,•a� . Other. Refer to Price Book for additional colorslfinishes �
It. : �
�-� Accessories: �
; � . CP:Polished Chrome �
Specified Model �
Model Description Colors/Finishes �
� _ K-2202-8 With 8" 20.3 cm)centers; less soap dispenser hole ❑0 White ❑Other �
�� K-2202� With 4"(10.2 cm)centers; less soap dispenser hole ❑0 White ❑Other �
K-2202-41 With 4"(10.2 cm)centers;with soap dispenser hole on left ❑0 White ❑Other
K-2202-4R With 4"(10.2 cm)centers;with soap dispenser hole on right ❑0 White ❑Other �
; �� K-2202-1 With single-hole drilling; less soap dispenser hde ❑0 White ❑Other �
, K-2202-1L With sin le-hole drilling;with soap dispenser hole on left ❑0 White 0 Other �
, � K-2202-1 R With single-hole drilling;with soap dispenser hole on right ❑0 White ❑Other �
'� Recommended Accessory �
K-8998 P-Trap ❑CP �
�
'' �
� � �
�' �
�
"� Product Specification �
; � The setf-rimming lavatory shall be 19"(48.3 cmj in diameter.Lavatory shall be made of viVeous china.Lavatory shall have 8" r
(20.3 cm)centers(-8),4"(10.2 cm)centers(-4),or single-hole drilling(-1).Lavatory shall be ADA compliant when instalted in �
; a 21"(53.3 cm) minimum depth countertop. Lavatory shall feature optional soap dispenser hole on K-2202-1 and K-2202� �
(-� models(L, left or R, right). Lavatory shall be Kohler Model K-2202- �
'i �
- Page 1 of 2 USA: 1-800-4-KOHLER �
114030-4-DD Canada: 1-800-9645590
� kohleccom
i �
�
� �
., ' r. �
� �
� �
:: � . - �
:-� �
�'.:�i�: . � �
� � � t
Technical Information Installation Notes �
�� �
ADA compliant Install this product according to the instal�ation guide.
Mexico products have an M after the first sequence of NOTICE:Countertop manufadu�er or cutter must use the
`� numbers(such as K-12345 M) cutout template provided with the product, or a current one
;', � Fixture'_ basin area water depth provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
Lavatory 14"(35.6 cm)x 4' not responsible for cutout errors when the incorred cutout
' 12"(30.5 cm) (10.2 cm) template is used. �
OuUet 1-3/4"D. �
(4.4 cm) �
_ 'Approximate measurements for comparison only. �
� Holes K-2202-8 K-2202� K-2202-1 �
,; � �
Spout 1-3/8"D. 1-1/4"D. 1-3/8"D. �
(3.5 cm) (3_2 cm) (3.5 cm) �
; Faucet 1-3/8"D. 1-1/4"D. �
(3.5 cm) (3.2 cm)
Soap dispenser 1-1l4"D. �
' (3.2 cm)
�
€
' �1 Included Components: �
�� Cutout template 1002966-7 �
�
�
�� €
_ --
K-2202-8 K-2202-4 K-2202-1 �
� 4" (10.2 cm) 7-3/8" L 4"(10.2 cm) R L R �
3-1/4" �� (18.7 cm) 3-1/4" 3-1/4' �
(8.3 cm) � � -e �-- (8.3 cm) � (8.3 cm)
, � !� �
� - 19" D. 4" . , 4� �
, � 10.2 cm) �
10.2 cm)
(48.3 cm �_3/8"(18.7 cm) 7-3/8' (18.7 cm) �
' �� �
24' (61 cm) �
^ � 3"(7.6 cm) �
� 5/8" (1.6 cm) �
�
T 8-3/8• �
(S) ' (21.3 cm)14" -�� �
,� (35.6 cm) 32" (81.3 cm) �g■ , ` �_ �
'� � �3/8'Cold__ Min• �(20.3.cm� �
3/8" Hot � � ---- 34" (86.4 cm) Min. 6" �
` `'- 1-1/4" � I Max- � , (15.2 cm) �
�� Outlet •--r-• 27. � Max. �
„�� � (68.6 cm) f g" :: �
4 10.2 cm Min. � (22.9 c . �
(S) Supply K-2202-1 8� K-2202-4 = 10" (25.4 cm)and �
� K-2202-8 = 14"(35.6 cm) � :;
Recommended ADA Installation f
Standard Installation �
` F:`�:--'.--�-�'��-' �
� Product Diagram
BROOKLINE,� COUNTERTOP LAVATORY TF-�BOLD LOOK �
::, Page 2 of 2 OF f/A��� �
114030-4-D D �\� �
.. � �
�
� � MANUAL FAUCETS � ���;�,I���
� � ��
420-C P
������
� ����
-= �Lavatory Sink Faucet �
' Product Type �
Lavatory Sink Faucet ��"��-� �s�" �� �'�F� ' � ��"��"��``� �
� � �� � �
, Features&Specifications e 'S ` � ���°
° �'> � =R � �� �� �x � �
� � •4 5/8"GC Integral Cast Brass Spout ��� � � �, ����
' •1.5 GPM (5.7 Umin)Pressure Compensating Laminar Flow �`�'������� ,x„�;��� � ��...��� � '��` � �
� � �
3 Outlet �j�����.� � '����'���, � �
�
•4 1/4"Metal Lever Handle with Red and Blue Service � �� � �� � �s� �'"��` ��
x.,,���� .�� ����
, ' BUttOfI �� �;; a,,, z5,.�� a„ �.
•Ceramic Disc Operating Cartridge with Temperature Limit ,��� "� � �"�-�� '� ��
�
,�gi �� � _ � <. �`"�� ,.: ,�, �x:
Stop � -
-1/2"NPSM Supply Inlets with Coupling Nut for 3/8"or 1/2" ������`�x'�� �� �_� °� 5 �� � '�'
' Flexible Riser �'���"� �����.,KK' ��,������.���''�� A �
'< ��Sul�mitEetl�����Atr�,�. , '�z �1�tr}�ft p
`t "�;� sa,x. �'�� . �c,�� �'`�� � a�_ -
a
��� � �� �".C���'.'x�C',�4+������ � .. _ ..
� Performance Specification ��� -� �� � � � � " �
„�.�..,� ✓�.�.r;� �"�"�F�a, �. :��„'"�
•Rating Operating Pressure:20-125 PSI � �
� •Rated Operating Temperature:40-140°F �
' II �
: �
� Warranty �
�
•5-Year Limited Faucet Warranty b :, � �
` 5-Year Limited Cartridge Warranty ��'"'-� � �
' =�' ;;;
•1-Year Limited Finish Warranty �
�, M�: �
' Compliant To � = �
•ASME A112.18.1 M E,. �
' •CSA B 125.1 �_'��' ` �
•ADA ANSI/ICC A117.1 � `�� �
�„ �
, _ �
' �
� �
�:
�
' �
�
�
�
' �
�
�
, �
�
�
�
� �:
�
-4� �
' 2100 South Clearwater Drive �
Des Plaines,IL
� P:847/803-5000
F:847/803-5454 ,
� Technical:800/TEGTRUE
www.chicagofaucets.com �
7/10 Product specifications subject to change without notice �
i
� �
a
420-CP �������� �
Lavatory Sink Faucet �'��'����`
��e�opti�ry' �
' �
' ,PrchitecUEngineer Specification �
Chicago Faucets No.420-CP, polished chrome plated solid brass construction with integral shanks.4-5/8°C-C integral spout. 1.5 �
4 ' GPM pressure compensating laminar flow outlet. Metal lever handle. Ceramic mixing cartridge with temperature limit stop and �
� volume control.4"Center to center valve body with 1/2"NPSM threaded inlets. Mounting hardware and deck gasket included for �
standard lavatory installations.This product meets ADA requirements and is tested and certified to industry standards:ASME §
� A112.18.1, NSF 61 Sec.9,and CSA B125. �
�
�
�
� � 5-1/2" �
(140mm) �
�
�
a €
� .
�
�
�
, �
' � �
} � 5-1/4° �
3-1/4° 15° �
(133mm) �
, ' � (83mm) ,� � � �
I 2 �
(51 mmj 3
�
� 2"-� }-- �
F � , , (5i mm) , �
2-1I2" �
1-3/4" � � �64mm) �
1-1/2" (44mm) DIA _� �
� ��� �
1NARE THICKNESS 15/16" � � �
� � 4�� � (24mmj DIA. �
� i/2"NPSM 4-5/8 �
{102mm) MALE INLETS ����mm� �
�
� �
�
� �
€ �
' �
, �
�
,i ' �
�
�
� Operation and Maintenance �
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation.After installation, �
` remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the �
product. Do not use abrasive cleaners,chemicals or solvents as they can result in surface damage. Use mild soap and warm �
, ' water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the �
installation instructians and repair parts documents that are located at www.chicagofaucets.com. ��
� �
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
; :�-::�offering a complete range of products for schools, laboratories, hospitals, office buildings,food service,airports and sport facilities. �
� �=�>'�Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. �
2100 South Clearwater Drive �
, �� Des Plaines,IL
� P:847/803-5000
' F:847/803-5454
Technical:800/TEC-TRUE
www.chicagofaucets.com
� 7/10 Product specifications subject to change without notice
8
� �
S �
# � � �. l
�
� ELKAY �
� ;
Lustertone° Single Bowl Sink �
3 .�-� SPECIFICATIONS Models LRAD and LRADQ Series -A.D.A. Compliant
GENERAL �
� Highest quality sink seamlessiy formed of#18 gauge,type 304
(18-8)nickel bearing stainiess steel.Self-rimming. o 0
DESIGH FEATURES °
LRAD(Q)Bowl Depth:4",4-112",5",5-1/2',6' or 6-1/2". I I �
''a � Coved Corners: 1-3/4`vertical and horizontal radius. `
� Bowl and Faucet Deck Recess:3/i 6'below outside edge of sink. �
Fnish: Exposed surfaces are hand blended to a lustrous high- �
� lighted satin finish. �
'E � Underside: Fully undercoated to dampen sound and prevent
condensation. i
� OTHER Model LRAD(p)2521653 �
Drain Opening:3-1/2" (see back for locations). �
;,; � NOTE:Uniess otherwise specified,models with one,two,three �
or OS4 faucet hole option are furnished with 3 faucet holes as
shown; models with choice of one, two, three, four or five �
; faucet hole option are furnished with 4 faucet holes standard. �
, � SINK DIMENSIONS(INCHES�* �
Cutnut in �
Oreroll Iraide 8ow1 C0°�rtOP No.of 3�/z' �
(1�/z'Radius �
U-Channel Quick-Clip• 1/s"Dia. Drain Opening Minimum Ship. ;
' Model Model � W � W � �0�) faucet Hdes (sce back Cabinet Wt, �
A � Number Number A B C D E L W q"Center fw details) Size Lbs. �
LRAD1316 LRADQ1316 13 16 10 10 123/a 153/e 1,2,MR2 w 3 Centered 18 9Vz �
LRAD7517 LRADQ1517 15 17Vz 12 12 " 143/s 16�/e 1,2,MR2 w 3 Centered 18 93/. �
j '� LRAD1522 LRADQ1522 15 22 11Vz 16 `� �43I8 21a/a 1,2,MR2 or 3 Off-Centered Rear 18 12 �
� LRAD1716 LRADQ1716 17 16 14 10 " 163/e 153/e 1,2,MR2,3 or OS4 Centered 21 8�h €
LRAD1720 LRADQ1720 17 20 14 14 " 163/e 193/e 1,2,MR2,3 w OS4 Off-Centered Rear 21 12 �
LRAD1722 LRADpt722 17 22 13�/z 16 `� �B3I6 213/e 1,2,MR2,3 or OS4 Off-Centered Rear 21 13 �
t � LRAD1918 LRADQ1918 19 18 16 11�/s " 183/e 173/e 1,2,MR2,3 or OS4 Off-Centered Rear 24 10Vz �
LRAD1918L LRAD41918L 19 18 16 11�/z " �H3�8 173/a 1,2,MR2,3 or OS4 Off-Centered Left 24 10Vz �
_ LRAD1918R LRADQ1918R 19 18 16 11 Vz "' 183/e 173/a 1,2,MR2,3 or OS4 Off-Centered Right 24 10Vz �
, � LRAD1919 LRADQ1919 19�h 19 16 13V2 « 18�/a 183/e 1,2,MR2,3 or OS4 Off-Centered Rear 24 13 �
LRAD2022 LRADQ2022 19V2 22 16 16 18�/s 213/e 1,2,MR2,3 or OS4 Off-Centered Rear 24 14Vz �
LRAD2219 LRADQ2219 22 19Vz 18 14 � Z'I3I8 18�/e 1,2,MR2,3,4 or 5 Off-Centered Rear 27 13 �
LHAD2219L' LRADQ2219L 22 19Vz 18 14 � Z�3I8 18�/e 1,2,MR2,3,4 w 5 Off-Centered Left 27 13 �
', � LRAD2219R LRAD(12219R 22 19�lz 18 14 `� Z�3I8 18�/a 1,2,MR2,3,4 or 5 Off-Centered Right 27 13 ?
�
r�► LRAD2222 LRADQ2222 22 22 19 16 " 213/e 213/a 1 MR2,3,4 or 5 Off-Cemered Rear 27 14 �
�� LRAD2521 LRADQ2521 25 21�/4 21 153/4 � 243/e 205/e 1,2,MR2,3,4 or 5 Off-Centered Rear 30 15 �
; LRAD2521 L LRADQ2521 L 25 21 V� 21 153/+ 243/e 205/a 1,2,MR2,3,4 or 5 Off-Centered Left 30 15 �
LRAD2521 R LRADQ2521 R 25 21�/4 21 153/i "' 243/e 205/a 1,2,MR2,3,4 or 5 Ott-CeMered Right 30 15 �
LRAD3122 LRADp3122 31 22 28 16 "' 303/e 213/e 1,2,MR2,3,4 or 5 Off-Centered Rear 36 19 �
� 'Length is left to right.Width is front to back. �
"Available in 4",4'/,',5",5Vx",6'and 6�/z"depths.Please consutt your sales representative for other depths or modifications. �
4� 4� �
� t �
I �
� I B THIS PRODUCT,AS CONSTRUCTED IS SUBJECT TO �
' � ' p � INTERPRETATION OFA.D.A. REQUIREMENTS. �
1-3/4'R THE UNOBSTRUCTED KNEE SPACE REQUIRED TO :
f j �-3�4�R E SATISFYA.D.A. STANDARDS MAY NOT BE DESIRABLE. �
� � C A� ALL DIMENSIONS IN INCHES,TO CONVERT
TO MILLIMETERS MULTIPLY BY 25.4. �,
g
_ � In ketping wifh our policy o/contuwing product improvement,Elkay ieserves the right to charge This specificatbn desnibes an Elkay product with desigrt,quafity and lunctional benefits M the ��
product specifications without noUce. user.When malting a comperism of otlier producers'oHerings,be certain these features are not �
�.' � oveiiooked. -
Elkay 2222 Camden Court Printed in U.S.A.
Oak Brook, IL 60523 �2009 Elkay
www.elkayusa.com
=._i (Rev. 12/os) 1-135G �
�
d
�
�
'� r. �
} �� Lustertone• Single Bowl Sink
ELKAY �
.� Models LRAD and LRADQ Series -�►.u.A. comp�iant SPECIF/CAT/ONS
{ )
'� DRAIN OPENING LOCATIONS �
�
�
._� �
i 5�' �
: '� +
_, � �
� I €
; '� �
t4-1/2'for LRAD(Q�1522
� Off-Centered Rear Centered �
. � �
5• 5• �
�
� 5• 5• �
�
�
'. � a.
Off-Centered Left �
Off-Centered Right �
� �
i �
'; �� HOLE DRILLING CONFIGURATIONS �
�
i �
4" 4" 4' `
���� �
1 4 � �
c
.4" .q" �
'� �
! � 2 � OS4
� 4. q^ 4" .4' �
�
s
MR2 1 5 � `��'
� �
i � 4Y 4• d
3 � ��`
'� �
€
�
'! �
Quick-Clip°Mounting System U-Channel Type Mounting System �
; _.
c
� i �
' .
I — �
,
�
�
P
�
� �
F
f �.' €.
, ���� �
Eika 2222 Camden Court Printed in U.S.A. �
y Oak Brook,IL 60523 02009 Elkay �
1-135G (Rev. 12/09) www.elkayusa.com �
' �
� �
; ' r' �
S� � CHICAGO +► "
MANUAL FAUCETS � �
' FAUCETS+� �
a 6eberit company �
' 895-317GN2AE29CP �
� � �
Deck Mounted - 4" Centers �
�
., � �
PRODUCT TYPE �
Deck mounted 4"centerset faucet Jpb Name �
' ftem Number �
FEATURES 8c SPECIFICATIONS
•Polished chrome plated finish Section/Tag �
•Solid brass body construction Model Specified
, •Rigid valve bodies Architect �
•5 V4"GC Rigid/Swing field convertibie gooseneck Engineer �
spout,catalog#GN2A Contractor z
' ' •2.2 GPM(8.3 Umin)pressure compensating laminar flow p Submitted as Shown ❑Submitted with Variations �
outlet,catalog#E29 nate �
•4"Wristblade metal handles with eight point tapered �
, broach,secured color coded index buttons,catalog#317 �
' , •Quatum"quarter-tum renewable compression cartridge �
that closes with water pressure with tapered square �
broach to facilitate handle removal,catalog �
' ' #1-100XTNF and#1-099XTNF �
•V2"NPSM supply iniets with coupling nuts for 3/8"or �
€
� 1/2"flexible risers :
•Mounting hardware included � �
' _ Y �
� PERFORMANCE SPECIFICATION �
•Rated Operating Pressure:20-125 PSI :� �
' •Rated Operating Temperature:40-140°F �
WARRANTY �
' •Lifetime Limited Faucet Warranty , �
•5-Year Limited Cartridge Warranty ' �
�
•1-Year Limited Finish Warranty i
�
, ' �
COMPLIANT TO �
•ASME A112.18.1 • CSA B125 � �
p=,.' ,._._ g
•NSF 61,Sec.9 • ADA �
' €
� �
�
�
' �
�
�
' �
�
�
, �
r
i
i
£;
� 2100 South Clearwater Drive A
r�"°� Des Plaines,JL 60018 �
' �y� P:847/803-5000 �
F:847/803-5454
•ME M 6 Ep Technical:800/iEGTRUE �.
www.chicagofaucets.com �
, 01/10
�
�
�
�
e ' r
895-317GN2AE29CP cH�caGO-� �
FAUCErs-•°
: � �, �
Deck Mounted - 4" Centers aGeberitcompairy
�
�
ll ' �
= ARCHITECT/ENGINEER SPECIFICATION �
� Chicago Faucets No. 895-317GN2AE29CP, Polished chrome plated solid brass construction with integral shanks.5 1/4' GC
, rigid/swing field convertible gooseneck spout.2.2 GPM pressure compensating laminar flow outlet.4"Wristbiade handles with �
: eight point tapered broach, secured color coded index buttons. Quatum' quarter-tum renewable compression cartridge �
t designed to close with water pressure with square tapered broach feature to help facititate handle removal.lnlet shanks contain �
' standard 1/2" NPSM threaded inlets with coupling nuts for connection to 3/8" or 1/2" standard flexible risers. Mounting �
; hardware included.This product meets ADA requirements and is tested and certified to industry standards:ASME A112.18.1, �
� NSF 61,Sec.9 and CSA B125. �
; � �
� �
€
' ! �
I �
I + #
, ' �
' ��ofFSE7�� �
e• , , ! 3°
(I O�miai � !t-I/8" `� �
i [283mm� �r t 133nim]
' �
� 6-3l4' i �
� � [17tmAl (� �
_ � � �
, � �
`���.�� 8" [152mm1 � Z• �
� � — � [5►aml �
, j
� ` IS/IG" �
, ' 2-3/8" � DfA. �
I6Dmm1 � � 1/l6'-I-I12• � ` � f2Amm]
' � , [2+ns-38mn] I-3/4• DiA.
�—�- 1PARE TNICKNESS �4�""^�
( f �
?? � 1!2` NPSk COUPUNG i�— 4° C-C —*�
'� MItT F4R 3f8' 4R IIT [102a�� �
' FlEXi9LE R15ER
� �
, �
OPERATION AND MAINTENANCE g
, Installation should be in accordance with local plumbing codes.Flush all pipes thoroughly before installation.After installation,remove �
spout outlet or flow control and flush faucet thoroughly to clear any debris.Care should be taken when cleaning this product. Do not �
use abrasive cleaners,chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and �
; ' protecting the life of Chicago Faucet products.For specific operation and maintenance refer to the installation instructions and repair
parts documents that are located at www.chicagofaucets.com. �
�
� �
�
�
Chicago Faucets,member of the Geberit Group,is the leading brand of commercial faucets and fittings in the United States,offering �
a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. �
� Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
�
E ::=_=` 2100 South Clearwater Drive �
F=_�:�
' tiz�r� Des Plaines,IL 60018 �
P:847/803-5000
S�� F:847/803-5454 �
C�g Technical:800lfEGTRUE �
www.chicagofaucets.com �
01/10 Product specifications subject to change without notice. �
'
�
�
� S - Z
�
� �.
� �- ELKAY. , . ;
Lustertone S�ngle Bowl Sink
Y ' SPEC/F/CAT/O1VS Models LRAD and LRADQ Series - �►.o.�►. Comp�iant
t �
�
GENERAL �
�� Highest quality sink seamlessly formed of#18 gauge,type 304
(18-8)nickel bearing stainless steel.Self-rimming. o
' DESIGN FEATURES I I ° o
; ' LRAD(0)Bowl Depth:5-1/2",6' or 6-1/2'.
, '� Coved Comers: 1-3/4'vertical and horizontal radius. �
. Bowl and Faucet Deck Recess:3/16'bebw outside edge of sink. �
� Finish: Exposed surfaces are hand biended to a lustrous high- �
? � lighted satin finish. ,
Underside: Fully undercoated to dampen sound and prevent �
condensation. �
OTHER Model LRAD(Q�521653 �
Drain Opening:3-1/2" (see back for locations). �
i � NOTE:Unless otherwise specified,models with one,two,three , �
or OS4 faucet hole option are furnished with 3 faucet holes as
shown; models with choice of one, two, three, four or five �
a faucet hole option are furnished with 4 faucet holes standard.
SINK DIMENSIONS(INCFIE�* �
: � c�eoue�n
Owrall Inald�Bowl �0U�0p No.of 3�/t• �
t V:•Radlw �
� U-ChannN Qukk-Clip• n 1 V:'Dla. Drain Op�nMp Mlnimum Shlp, �
+: � ModN ModN L W L W D Comws �y��HoNS (sN bak CaDNK Wt
Numbw Numb�r A B C D E L W �•CaM�r ta details SW Lbs, �
, LRAD1318 LRAD01316 13 16 10 10 123le 15�/e 1,2,MR2 or 3 Centered 18 gVz �
' LHAD1517 LflAD01517 15 17�/x 12 12 � �43I6 16�/e 1,2,MR2 or 3 Centered 18 93/�
�-r �
'' LRAD1522 LRADQ1522 15 22 11�/z 16 '• 14�1e 213/e 1,2,MR2 a O(f-Centered Rear 18 12 �
1 LRAD171B LRAD01716 17 16 14 10 " 16�h 153/e 1,2,MR2,3 or OS4 Centered 21 8�/z
z LRAD1720 LRAD01720 17 20 14 14 " 163le 19�/e 1,2,MR2,3 or OS4 Oif-Centered Reaz 21 12 �
LRAD1722 LRADQ1722 17 22 13�/x 16 " 163/e 21�/e 1,2,MR2,3 or OS4 Off-Centered Rear 21 13 �
�•� LHAD1918 LRA�Q1918 19 18 16 11�1x " 183/e 173/e 1,2,MR2,3 or OS4 Off-Centered Rear 24 tOVz �
LRAD1918L LRADQ1918L 19 18 16 11�/s " 183/e 173/e 1,2,MR2,3 w OS4 Off-CeMered Left 24 10�h �
LRAD1918R LRADp1918R 19 18 16 11�/2 " 183/e 173/e t,2,MR2,3 or OS4 Off-Centered RigM 24 10Vz �
'' � LRAD1919 LRAD01919 19�/z 19 16 13Vz » 18�/e 18�/e 1,2,MR2,3 or OS4 Off-Centered Rear 24 13 �
LRAD2022 LRADQ2022 19�h 22 16 1fi 18�le 21�/e 1,2,MR2,3 w OS4 Oft-Centered Rear 24 14Vz �
LRAD2219 LRADQ2219 22 19�/2 18 14 " 213/e 18�/a 1,2,MR2,3,4 or 5 Off-Centered Rear 27 13 �
'' � LRAD2219L LRAD�2219L ZZ 19Vz 18 14 « 213/e 18�/e t,2,MR2,3,4 or 5 Ott-Centered left 27 13
LRAD2219R LRADQ2219R 22 19�/z 18 14 213/e 18�/e 1,2,MR2,3,4 or 5 Off-Centered RigM 27 13
�.� LRAD2222 LRADQ2222 22 22 19 16 " 21�/e 213/e t,2,MR2 4 a 5 Off-CeMered Reaz 27 14 �
LRAD2521 LRADQ2521 25 21 W 21 153/� " 24�/e 205/e 1,2,MR2,3,4 or 5 Otf-Centered Rear 30 15 �
� tRAD25211 LRADp2521 L 25 21�!+ 21 15�/� " 243/e 205/e 1,2,MR2,3,4 or 5 Ott-Centered Left 30 15
,LRAD2521 R LRA�Q2521 R 25 21�/+ 21 15�/� " 243/e 2051e t,2,MR2,3,4 w 5 Ott-Centered RigM 30 15 �
• � LRAD3122 LRADQ3122 31 22 28 16 " 3W/e 213/e 1,2,MR2,3,4 or 5 Of(-Centered Rear 36 19 �
`Length is kft to right.Wldlb is hont to back. �
� "AvallaDle in 5�/:",6'and 6�h'depths.Plea�e consutt your ralea representadve for otber deptbs or modlflcatlons. �
` 4' 4' �
3 �
�i
' i THIS PRODUCT,AS CONSTRUCTED IS SUBJECT TO �
' �. � � g 1NTERPRETATION OF A.D.A. REQUIREMENTS. �
� � � THE UNOBSTRUCTED KNEE SPACE REQUIRED TO
' 1-3/4'R 1-3/4'R E
SATISFYA.D.A. STANDARDS MAY NOT BE DESIRABLE. �
�� �� � ALL DIMENSIONS IN INCHES,TO CONVERT `
a A TO MtLUMETERS MULTIPLY BY 25.4. �
. � In keepng witlt y '. ' t improvement,EMrsy reserves the rigAf to chenpe ThIS SPKI(IC8b0l1 dlSC/IDG7 M EUfBY P���h��BA.W�M',���tpI18I D@MI�3�O I/M �
.� �.� .,- P�oduct specfications wiMwf noGee. user.Wlun making a canparison of othxpodicers'ollennps,6e certain tfxse/ealuiee an nof �E'
� oveAooked.
j Elkay 2222 Camden Court Printed in U.S.A. �
Oak Brook, IL 60523 m2005 Elkay �
www.elkayusa.com
i r:3 (Rev.5/os) 1-135F
� �
�
C;lucago r�aucets -(;ommercial r aucet Yroctucts Yage 1 of 1 1
� s - �. �
i _ �. �
. �
� , �
�«��Q� { � �
' FAV�+��,�, i Home � Geberit North America ( Log in Search Contact Legal �
� •6rbrkoompr� � �
f 9
:. ' ! �
Company Cafalog ECAST� Distributlon PaRners Lkereture Customer Care Account Management �
� �
_._..Manual ---------------� Cahalog>Laboratory>Water Fittings-Decic Mounted> a
'; , -----------------------� �
: - !
- -__._._.._..------..._...---- -�------
F�s� - _ ; 947-(�N�A E3 C� �
;
� ___._..._------�____.___,.....------- . �
Laboratory Water Fittings - Deck Mounted �
� i Components �
s
��'--� -------"; Price S 352.92 �
i ' � � �
' Features�Specifications �
Produc:t Configurators ■ Combination Hot and Cold Water Fitting s
i �� '�KBA-8" R���a�s��� �
€ �� • �• z.2 �pm o�r�Fr J� �
' i �� � `� ■ 317-a"Metal Wristblade Handies with ._ ., �
Secured Red and Blue Service Buttons �
; ; � ■ QuatumTM Operating Cartridges � ��
' ■ SS-1/2"NPT Female Thread Short Mgle � �
' i Flanged Supply Artns i �
� ■ 748-002K-1/2"NPSM Supply Inlets with � 4
; CouDling Nut for 3/8"or 1/2"Flexible Riser
�
f f J'
1
' i f
; g
Codes 8 Standards •„�� �
� i �• Documents v,���' €
� 4 +� >Rough in PDF F
' �, W� ■ ASME A112.18.1M >Rough In DXF � �;
■ CSA 6125.1
■ NSF 61,Seaion 9 >Parts Drawings PDF � €
■ ADA ANSIRCC A117.1 >Instaltation InsVuctions PDF ^�~ � �
' ; >Buy American Act-ARRA Data PDF �µ � �
i �
: � �
' _. _ .........._. . ___.... _.._..__. ._.__.._,...._.. ___._. .._._... ... .._._......_.._...... . ...__._..
� i
, ; _� �
: ; >Site Requirements t3 Pnnt 1 �
--� �
` ' �2010 Chicago Faucets-All rights reserved.AI�product specifications subject to change.Please read i �
our legal infomation. ; �
� �#
� t'
' , €
' �
�
' �
t
1
�
' }
� e
G
�
' �
�
£
_ .3 �
' `
�
�;
�
E
' ' �
http://www.chicagofaucet.com/catalog/catalog.php?PartNum=947-317CP&FamilyID=126... 7/13/2010 �
�
�.�
; 11 �s _3
p �- ELKAY �
` �j Sturdibilt• Scullery Sink �
SPEC/F/CAT/ONS Square Corner poubie Compartment �
€ ' GENERAL ALL DIMENSIONS IN INCHES. �
" �� Model No. SS #14 gauge,type SEE OTHER SIDE FOR DIMENSIONS IN MILLIMETERS. �
304 stainless steel scullery sink.Compart- �
; ments 14" deep. Square corner welded CHEpcMODEL SPEGRED): �
construction. Full length 8' high back- NO DRAINBOARD �
` � splash with 45° sloped top. 1-1/2' wide q �
sloping top channel rims. Integral drain- Moae� °in1e1S101S 1-1/2" B B 1-1/2• �
; board/s, sink compartments pitched to N�� A B � ��2
� drain. Exposed surfaces polished to a 33 15 ••; � �
satin finish. «E� \1/ � {
Sinks supported on (4) LK251 stainless 39 i8 }� 24.27_�/2•
; � steei, 7-5/8" O.D.tubulaz legs,#16 gauge SS8242 a5 21 � ��: � I �
wall thickness. Adjustable bullet shaped �� —�---i
� feet. ���, . 51 24 3-1/2'DIA. 1-1/2'
; � Y�� ..(.r. �I'�. .__.:.;..,
Shaded areas are models carried CSK HOLE
in stock with standard faucet SS8254 57 27 �
location. SS8260 63 30 �
' 0 Non-shaded areas with specified .SSC820o �
! dimensions are standard models �
which must be made to order - RIGHT DRAINBOARD A
standard faucet location unless 1-v2" B B C �
otherwise specified. M�� oimensions 2."{�"�� ���_y�.
Number A B C � : �
.� Last item in each group is custom. �
� Fill in dimensions.Standard faucet SS823oR 55�h 15 24 27_��.�
� location unless otherwise spec�ed. , pq• 5� �
�2�� 61 fz 18 24 � �
Drainboards over 25-1/2"fumished `� 1 .L ��• g
with one tubular leg. SS8248R � 73�fi 24 24 � � 3-1/2'DIA. �
Drainboards over 48" fumished SS8254R 79�fi 27 2a �-��2� CSK HOLE �
� with two tubular legs. SS8260R 85�h 30 24 �
SPECIFIED FITTINGS: .SSC820oR �
SUPPLY: A �
� - DRAIN: LEFT DRAINBOARD � B B � y�, �
t i ) ModN Dimensio� �� I 11
?__ FURNISHED WITH: Number A B C �-��2� 2� �
LK251. (Four)Stainless steel tubular legs, �'� �
1-5/8' O.D.,#16 gauge.Adjustable bullet SS823oL 55�h 15 24 ,.� �,( �27_��• �
�� � feet. �SS82� �g. �: �61�k 18 24 Jy� 2i. I �
SS8248L 73�fz 24 24 3-1/2"DIA. � i �
1-1/2`
SS8254L 79�h 27 24 CSK HOLE �
. �
' � SS8260L 85�h 30 24 �
•SSC8200L �
�
RIGHT&LEFT DRAINBOARD A �
�� Model Dimens(ons � C�B�B�C �
� Number A B C 1-1/2" � 1-1/Y �
, ,,��. -� �
' ��SS823f�i�"`�K; 78 15 24 �
27-1/2" �
SS8236LR 84 18 24 . � � � 24"
� ' � �
� 2?��L�! ��� 96 24 24
SS8254LR 102 27 24 3-1/2"DIA. 1-1/2'
CSK HOLE
� SS8260LR 108 30 24 k
t
•SSC8200LR 1-1/2'DIA.2 HOLES
6„ s' 3-1/Y �
. o. f_______ _' _'___'______J �
OL�����'� __� �-._ ' �.
�� INDICATE NUMBER OF FAUCET HOLES WHEN ='===� �' -�� -----���� ---������-�"
--------..>-�
PLACING ORDER.(NON-STANDARD FAUCET 44. 14' �
AND OVERFLOW DRILLING LOCATIONS ARE �
� AVAILABLE.SPECIFY ON DRAWING AT RIGHT.) �
s
36' q l
�%8 DfA• �
��`� H� �
Elkay 2222 Camden Court Printed in U.S.A.
Oak Brook,IL 60523 �2006 Elkay
elkayusa.com
-;� (Rev.s/O6) 4-3F
��
�
���� �
i1� �2� R�� �5 - 3
� Drain Pitting with Lever Handle an
� Overtlow, 2" Tailpiece ELKA�
Model LK87RT � �
� �
„' '� • •
� GENERAL �
l '� LK87RT Rotary lever operated drain outlet fitting for 3-1/2" „�
(89mm) opening, 4-1/8' (105mm)O.D. top flange. 1-1/4' �
(32mm)O.D.chrome plated overflow with stainless steel over-
flow faceplate. Nickel piated bronze waste body with stainiess �
- steel face flange and perforated grid. Chrome plated brass 2' �
' �� (51 mm) x 4"(102mm) tailpiece and stainless steel lever arm. �
Ship.Wt.6 Ibs.
� �
� 72000577 72000575 �
NICKEL PLATED C.P.BRASS O
BRONZE FLANGED LOCKNUT �
H�FLOW 72000574 � � �
j STAINLESS STEEL 72000482
, � OVERFLOW STAWLESS STEEL
FACEPLATE f FIAT STAAINER
�� 72000487
STAINLESS STEEL
FACE FLANGE �
72000576 � Model LK87RT
, �� RUBBER GASKET 72000489
°�••�20005�g /—FIBER GASKEf �
PLASTIC WASHER �
/
�72000578 �RO�9CHROME �
-- �'""� C.P.BRASS CAST BRASS €
i i COUPLJNG NUT STEM VALVE
'� � �
j bJ P�C NEOPRENE`O'RING �
WASHEA ��72000583 �
7P0005�g NICKEL PIATED BRONZE
-- p,p gpq$$ WASTE BODY o
f COUPLJNG 7ppppqgg�,p �
N�T BRASS PACKING NUT
�.:� � I I � � �
t72000486 RUBBER"O"RING Q
RUBBER GASKEf ���2000483 BRASS WASHER O p0�p O
� 72000484 SPRING WASHEA �O Op0 0 0
COUPLINGNUT � � 000 O �
O��DO �
, C.P.BRASS�� O�O O�O
4 72000580
NICKEL PtATED BRASS 72000328 p• O O O
OVERFLOW TUBING HA�IDLE ASSEMBLY (51 m� �
� 72000720 OVERFLOW HEAD �
, � TAILPIECE TAILPIECE ASSEMBLY REQUIRES 2'(S�mm DIA
HOLE.FACE FIANG�IS �
C.P.BRASS 2-3/4'(/Omm)DIA. (
IMAGINARY SINK �
� COMPARTMENT
16' TWIST ACTION �
(406mm) TYPE HANDLE �
HAS A POStTNE
�q_�/q• LOCK IN THE
(362mm)� OFF POSffION �
, �� I-- (4„�') -'I �
tOSmm
�
2-3/4' 4-5/16' p_r�•
(7pmm) (�10mm) (s�mm)
� ASSEMBLED � �
�� - -- � ; �
� I
3/8'
1-1/4' (10mm) I g_sryg• ..
(32mm)O.D. (211 mmj �
t� I �
i �2'(51mm)O.D.x �
4'(102mm)LONG �
I �
� I ;:
� �
12' �
`-.� . �—Fi05mm) �.
��. �
Elkay Manufacturing Company 2222 Camden Court Printed in U.S.A. �
Oak Brook,IL 60523 p2001 Elkay Mfg.Co. �
www.elkay.com (6/01) 18-13
� B
, �
Chicago Faucets - Commercial Faucet Products Page 1 of 1 �
1 �—�3 s
k t. �
F
3
CHfCII�t30,� � �
, F
�AV�,+��,�,, � Home � Geberit North America ( Log In 5earch Contact Legai �
r � a�� � �
; ' � �
Company Catalog ECAST� Distribution Partners Literature Customer Care Account Management �
�
�
�
;--.............._..------.._...--------....--- -- �
' Manuai Catalog>Manual>Wall Mounted-Adjustable 7 114"-8 3/4"Cenfers>631-GN8AE3CP �
Electronic
F�aseN� � 631-GN8AE3CP
; ' �a�►�tory � Wali Mounted - Adjustable 7 1/4" - 8 3/4" Centers
�Components �
Prite$306.99
, , F Features�Speci£cations �
Produd Configurators � ■ Sink Faucet �
# , ■ GN8A-8"GC Rigid/Swing Goosenecic Spout �
' P ■ E3-2.2 GPM(8.3 Umin)Pressure
� � Compensating Softflo�Aerator �
,;� _ ■ 317-4"Metal Wristbiade Handies with �
`9 Secured Red and Blue Service Buttons �
' ■ QuatumTM Operating Cartridges �
' ■ G-3!8"Offset Adjustabie Supply Artns with :
1/2"NPT Female Thread Inlet �
� �
�U'Y �
�N
' � Codes 8�Standards Documents � �
� >Rough In PDF �
, ' ` � � _..........._....-----..__...__.............__._._......_....___________....___ _---
� °' � >Parts Orawings PDF �
■ ASMEA112.18.iM _ . . _.. _....... ----..._.. .. .. _ —.--- - ..
■ CSA B125.1 >Installation InsVuctions POF
_ _ _.. ...----- ---...__......._
� � � ■ NSF 61,Section 9 >Buy American Act-ARRA Data PDF �
�.;:. ; � ■ ADA ANSIRCC A117.1 _....---- ---- -----._....... � ---- �
[ �
�
' � �
� _...._. _...__.... . .... _...._ ____ --- . .......____.. __....... . __. _. ...._
_...----- €
� E >Site Requirements L-3 Print �
_.._................. _ _.. _._ _...___
_.._..._._......_...... . ._. _. __. _._.......-- - ----- ...
' ? �2010 Chicago Faucets-All rights reserved.Ail product specifications subject to change.Please read �
` our legal infumation.
i �
� �
. € �
, � �
f �
� �
: � € �
� �'
�
t £
' E �
�
�
� € �
i �
t �
t �
� �
� � ' �
£ �
; x:
- �
L4.'� � �
, � [ �
4 �
�
' � htt ://www.chica ofaucet.com/catalo catalo . h ?PartNum=631-GN8AE3CP&Famil ID... 7/13/2010 �
,
P g � gP P Y �
ti
; I MANUAL FAUCETS - ����,t:�+��
� 3 �,
'116.124.21 .1 �A�'��T'��
' ��e�t�ari�ry� �
_ � �ingle Hole, Gooseneck Wall Mount, Electronic Lavatory Faucet with �
�
', ' Dual Beam Infrared Sensor �
x � `� ��� ����:���_
.�� ���r,
Product Type = ,��� ��„��
' Single Hole,Gooseneck Waii Mount, Electronic Lavatory _�' �����,� `�. ���� �'-�
��, � �.� � � ,
' Faucet with Dual Beam Inftared Sensor �'���'����`�� ` ''��' •
� � � � ���; � � � - � � ,�;
������� � �� � �
� �.,���„j g��� �s � � �^s.x���� �,�a��� [
s
Features S Specifications `��` ��� ��` � �. �����'���� ���,-�.��'� �
� �� �
�� ��� �� � � � �:,� �
t •Gooseneck Spout ����°����� ,.� ;,����� �' , '��"` �� :: �
•0.5 GPM (1.9 Umin)Vandal Resistant Spray Outlet :,,,q�,�� '� � ��:= � '�..��� �':�'��� ��� �
' • Dual Supply for Hot and Cold Water Service ��'�, `���'��-,� ��� ���,��'���° ��,����
•User Adjustable Temperature Control Mixer �"`�"�� "�� � ` t �����'�' � "�"��° �
� � ��,,� �a� �� � �
• 12 Volt AC Transformer Required (Order Separately) �����.��' ���' ��'� ��"� �.�� ��,������
' •Stainless Steel Hoses Included ������� � � � �������z ;� ` �,� ��F>�� �
Includes Optional 2.2 GPM(8.3 Umin)Aerator Insert � �j Su�mitted as Skwam"�����"'�'�Sri�n� �, an�ti���`���.�� �
* � �� �����
� � .
• Multiple Field Adjustable Modes and Ranges � �°�� ' � � �" � � ',�,,,� � ,,,������� �
' � . .. � � '
�ta�� � � �: s �. ��� .� -� �
; •Geberit Commander™ Software Compatible � � � �-�� , > �� ������
_��.�..r„��„�:,,.�, ::��. ,,.�.�..������ ��,.> �
s �
Optional Accessories �
' •Thermostatic Mixing Valve(for 1 to 6 fittings) �
•Thermostatic Mixing Valve �
Thermostatic Mixing Valve(for 1 to 8 fittings) G
`� Plug-in Transformer-Single Use �
' `- -
•Hardwire Transformer-Multi Use �
' •Copper Tube Supply Inlet �
�
�
Performance Specification • �
` ' •Rating Operating Pressure:20-125 PSI �
' •Rated Operating Temperature:40-140°F �
�
�
': ' �
Warranty �
� �
• Lifetime Limited Faucet Warranty �:
• 1-Year Limited Finish Warranty �
' •5-Year Limited Mechanical Warranty �
•3-Year Limited Electronics and Solenoid Warranty �
�
, ' Compliant To `
�
•ASME A112.18.1 M �
, ' •CSA 6125.1 �
�:
•ADA ANSI/ICC A117.1 �
�.
' �
�'
= �
_==::�3 �
' ` 2100 South Clearwater Drive �
,f Des Plaines,IL
S A. � P:847/803-5000
, ' 1' F:847l803-5454
C US Techniq1:800/TEGTRUE
www.chicagofaucets.com
7/10 Product specifications subject to change without notice
� � �
v � 116.124.21 .1 ���+���� :
�
` Single Hole, Gooseneck Wail Mount, Electronic �''�'�����`
a 6�etr��
� ;�:. �avatory Faucet with Duai Beam Infrared Sensor
�
,s ' ArchitecUEngineer Specification
, Chicago Faucets No. 116.124.21.1,polished chrome plated solid brass construction. 5-3/8"C-C rigid/swing field convertible �
gooseneck spout with .5 GPM vandal-resistant spray outlet. Multiple field adjustable modes and ranges. Dual supply for hot and �
` ' cold water service. User adjustable temperature control mixer.Above deck hermetically sealed electronics module and solenoid
with filter screen. Inlet supply check valves. Flexible stainless steel supply hoses with filter screens. Mounting hardware included. �
� 12 volt AC transformer required (order separately).This product meets ADA requirements and is tested and certified to industry �
� standards:AS �
! -----��
, � �� �
� ,
� �
� � �
: 1 i � �
, �
, � �
, ' I t2 30 '
� [30.� ( �
_ � �
, , � 53/8 �
7-5/8 [137� �
� � [194� � '
�z-vz � � �
; , [�4I �
4 2 �
, , ':o [5» �
-.. �
� �
1 �;�� -�-- - -1.�- _ �
� , �
; ' � � �,-��s tas�
FLANGE 1-3/4 I 01-1l8[29) �
MIN.WARE �
I38i1 I I ��] �
� � �
' 1/tb-5/8 �
[z-t6� �
WARE THICKNESS
STAINLESS STEEL
I 1 I BRAIDEDHOSES � �
�� � �
' 3/8 COMPRESSION THREAD �
' �
�
f
,` ' Operation and Maintenance �
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation.After mstallation, �
' remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
' product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the =
installation instructions and repair parts documents that are located at www.chicagofaucets.com. ¢
_�
'. ' �
Chicago Faucets, member of the Geberit Group,is the leading brand of commercial faucets and fittings in the United States, ;
:'�ffering a complete range of products for schools, laboratories, hospitals, office buildings,food service, airports and sport facilities. �
��_=-
, ' �"' Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance. �
2100 South Clearwater Drive �
Des Plaines,IL
j y�,�� P:847/803-5000 �
' �•` Technipl:800(fEC TR E
� www.chicagofaucets.com
7/10 Product specifications subject to change without notice �
�
- � � •
: ' r.
�
Lavatory Sink, Wati Mounted
;` , ^ Models ELV2219CS, EW2219, EL'KA�
1 EWW02219CS and ELYW02219
x
' • •
` GENERAL � ;
#18 gauge,type 304 (18-8)stainless steei lavatory with 5/32" �
,; , (4mm)raised nms and 2-1/2" (64mm) high backsplash. Com- ADA
n partment has 1-3/4" (44mm)radius vertical and horizontal cov- �
ed corners. 2-1/2' (64mm) apron at front and both sides. o � ° Compliant
Exposed surfaces are hand blended to a uniform satin lustrous
� finish. Rear centered outlet. Drain opening 1-5/8" (41mm).
Underside is sound deadened.Furnished with integral staintess
steel support brackets and separate wall hanger. Meets ADA
requirements.
' FOLLOWING MODELS DO NOT INCLUDE �
FAUCET AND FITTING:
Model ELV2219
} (CHECK MODEL SPECIFIED) �
See oiher side for faucei hole locations �
❑ ELV2219 �
' ❑ ELV2219CS �
� �ELVW02219(With connected overflow) g
� ELVW02219CS(With connected overflow) �
' , DIMENSIONS €
M� A B C D E F 6 H I J K �
� Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
ELV2279 71 559 19 483 16 406 1P/z 292 3 76 4Vz 114 3Vz 89 25/e 67 4�Shs 125 2Vz 64 5 127 �
' ' ELVW02219 22 559 19 483 16 406 17�/2 292 3 76 4Vz 114 3�/x 89 25/e 67 4�Shs 125 2�/t 64 5 127
1' g
` (25mm) �
l
�
' � F � SEE OTHER SIDE FOR FAUCET HOLE LOCATIONS �
r
i G 1-5/8"(41mm) �
g DIA.HOLE �
I � �
1-3/4"R RAISED RIM �
� (44mm) FRONT&ENDS
�
, ' E �
�E+I�--- C--►IsE ��R ' �
! A (25mm) i �
�-------------------•---� � �
' � � €:
4 SLOTS H I I H � �
,1/4'(6mm)x 1"(25mm) � �
� WALL HANGER �
i � ----------------- �
15/16' S/g" 1/4" �
(24+m)��g+m� � � � , (6mm) SIDE OVERFLOW-IF APPLICABLE �
I K �--------------i � TOPOFRIM c
� � � � —� �
� �
� 1-3/4"R 5-1/2" K �
44mm � (140mm _� �
3/S'(10mm) �
4' DIA.2 HOLES �
(102mm) �_2�. EACH BRACKET
, (533mm)
31-1/2"(800mm) �
STAINLESS STEEL HOUSING TO FLOOR
WITH RUBBER WASHER RECOMMENDED �
; FURNISHED LOOSE � s
' t
�
"_'.� . In keeping with our pdicy o/con6'rniln9 podvct Mnprovemen;Epray reserves the rigM fo G�arge ;:
' :-=J poduct speci/Icab'ons without notice. �`
, . ' 2222 Camden Court Printed in U.S.A. �
Elkay Manufacturing Company �
Oak Brook,IL 60523 �2001 Elkay Mfg.Co.
www.elkay.com (Rev.6/01) 3-3F
�
, �
�
�
� � �
' r. �
Lavatory Sink, Wall Mounted �
Models ELV2219CS, E��zz,9, ELKAY �
y ' ;,- ELVW02219CS and ELYW02219 �
' ;i i
a
� � �
r '
� �
' HOLE DRILLING CONFIGURATIONS �
�
1-1/4'(32mm) �
' DIA.-1 HOLE .
�
1
` ' �
1-3/4' �
(44mm) R
a
r �
�
' �
�
a
i
' Models ELV22191 `
ELVW022191 �
i �
' �
4" 4" �_��p•(38mm)
(102mm) (102mm) DIA-3 HOLES k
E
�
� S�
1 �� � �
�
1-3/4' , �
' (44mm)
�
�
�
' ' �
i Models ELV22193
ELVW022193 �
, ' �
, �
2� 2� 1-1/4'(32mm) �
' (51 mm) (51 mm) DIA-3 HOLES �
f
I �
' 1-3/4' , �:
(44mm)
�
' �
w
�;
' Models ELV2219CS3
ELVW022�9CS3 �
=��� �
, 2222 Camden Court Printed in U.S.A. �
Elkay Manufacturing Company Oak Brook,IL 60523 �2001 Elkay Mfg.Co.
3-3F (Rev.s/01)
, �
�
�
�
�
' � � � ��
ELECTRONIC • ' CHICAGO±-, �
' _ FAUCETS+ �
a 6eberit company
� ` ' 116.432.AB.1 �
a ' HyTronic� Gooseneck Deck Mounted Singie Hole Faucet - DC �
�
_ �
` ' PRODUCT TYPE
� Deck mounted single hole faucet �
, Job Name
FEATURES 8c SPECIFICATIONS Item Number �
•Polished chrome plated finish Section/Tag �
•ECASI''design provides durable brass construction Model Specified �
' with total lead content less than 0.25�o by weighted Architect �
average
•Efficient dual-beam infrared sensors Engineer
•5-1/4"GC rigid/swing field convertible gooseneck Contractor �
` ' spout,Catalog#GN2H8FC ❑Submitted as Shown ❑Submitted with Variations �
•1.5 GPM(5.7 Umin)laminar flow control device at �ate �
� spout iniet �
, •Inlet supply check valves �
•Muftiple field adjustable modes and ranges �
•6 V lithium CRP2 battery included �
K
•Low battery indicator �
; , •User adjustable temperature controi mixer �
•Dual supply for hot and cold water service
•Above deck hermetically sealed electronics �
•Above deck water-tigM solenoid with filter screen �
•Free spinning flexible braided stainless steel suppiy �� �
' `•-..� hoses with filter screens �y �
•Geberit Commander°software compatible
•Mourrting hardware included �
, ' �.
OPTIONAI ACCESSORIES �
•4"GC trim cover plate
' •8"GC trim'cover plate �
•Copper inlet tube �
•Thermostatic mixing vafve
�:
; ' PERFORMANCE SPECIFICATION �
•Rated Operating Pressure:20-125 PSI
� •Rated Operating Temperature:40-140° F � ' �
' •3-Year Ba ttery L i fe or A pproxima te ly 2 0 0,0 0 0 Uses � �;
' t.
WARRANTY �
•5-Year Limited Mechanicals Warranty
' , •3-Year Limited Electronics and Solenoid Warranty l
•1-Year Limited Finish Warranty �
COMPLIANT TO �
' •CA A61953(2006) • VT S.152 �
•ASME A712.18.1 M • CSA B125
�
•ADA ANSI/ICC A717.1 }r
t
, s
�
==}�i � 2100 South Clearwater Drive 4
, .� y y� Des Plaines,IL 60018 �
� P:847/803-5000 �'
F:847/803-5454 �'
,y f M a E F Technical:800lfEGTRUE f
www.chicagofaucets.com �
OS/10 #
,
�
�
'' ' r.
" ♦ CHICAGO+�
116.432.AB.1 FaucErs+
' a Geberit comparry
HyTronic� Gooseneck Deck Mounted Single Hole Faucet - DC
'
ARCHITECT/ENGINEER SPECIFICATION
Chicago Faucets No.116.432.A6.1,polished chrome plated brass construction.ECAST'construction with less than 0.25�0 lead
' , content by weighted average.6 V lithium CRP2 battery(included).Low battery indicator.5-1/4"C-C rigid/swing field convertibte
` gooseneck spout with 1.5 GPM laminar fiow control device at spo�t inlet. Muitiple field adjustable modes and ranges. Dual
supply for hot and cold water service.User adjustable temperature control mixer.Above deck hermetically sealed electronics
' ' module and solenoid with filter screen.Inlet supply check valves.Free spinning flexible stainless steel supply hoses with filter
$ screens. Mounting hardware included.This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to
�
, industry standards:ASME A112.18.1,CSA 6125,CA A61953(2006),and VT S.152.
�
I �
` ' (
E �
� I
� � n-�s• �
; , � 5-1/4' I289mm1
I133mm] °
3 7-3/4'
�197mm]
' 2-in• I
pA ' �
; I64mnJ t-7B'
[48mm] � 0 �
) 1-tn6' [vmml
"' NYPL WARE qA �
St/2' I � I 17-5/8' �
' [140mm1 � tl16'-1-12' I I [448rtrn1 g
�i�3e�,1 I I
� � wa�n�ca�ss �
STAINLESS STEEL I , �
, BRAIDED HOSES i
, ' 4 3/8'COMPRESSIONTHREAD �
OPERATION AND MAINTENANCE
',1 ' Installation should be in accordance with local plumbing codes.Flush all pipes thoroughly before installaUon.After installation,remove
spout outlet or flow control and flush faucet thoroughly to clear any debris.Care should be taken when cleaning this product.Do not
� use abrasive cleaners,chemicals,or solvents as they can resutt in surtace damage. Use mild soap and warm water for cleaning and
protecting the life of Chicago Faucet products.For spec'rfic operation and maintenance refer to the installation instructions and repair
' parts documents that are located at v�rww.chicagofaucets.com.
, '
ECAST'from Chicago Faucets,is the line of durable,high-quality brass faucets and fixtures that are designed and manutactured with
less than one quarter of one perceM (0.25%)total lead content by weighted average. These products are irrtended for installation �
' where state laws and local codes mandate lead conterrt levels or in any location where lead content is a concem. �':
�
2100 South Clearwater Drive '
F ;� Des Plaines,IL 60018 �g
' , �`� � �. P:&47/803-5000 i
p F:847/803-5454
C US t,..�.,,,,, Technical:800lfEC TRUE
www.ch icagotaucets.com
, 05/10 Product specifications subject to change without�otice.
�
r�
� �' !
' � SMITHo JAY R. LOCATION
j , � SMITH MFG. CO.� ��: ' ., �
�) + D�SIQO�O�M�IT�H INDUSTRIES,INC. � � `f�_ ! g
�" // /
x' � Morrtca.�Rr.u�ra�x�oo-a2»lus�! y l
.. � �y��N TEL:J94277d510 FA7C3742T2-7JB8 www.Jnmith.aom • MEMlEROF: ���,s�
� � FLOOR OR SHOWER DRAINS
� WITH ADJUSTABLE STRAINER HEADS �
n �� m b
� N FUNCTION:General service floor drain for use in showers,toilets,kitchens and other finished areas where foot traffic is expected.
� , � � The round top strainer head is used for ail types of oured finished floors.The s uare to is articularl ad
Z P q p p y aptable to floors that are
� finished in material of square or straight line pattem.Reversibie flashing coliar permits adjustment of the strainer to meet finished �
` � floor level.
; ' < 9(230 DIA
� o ) High 9(230)DIA
w _ �OW Pnsition Low High
� N Q � Position �B DIA or SQ� Position
� Position �B DIA or SQ�
? � o
W �M� XM� XX-MIN X-MIN
; W W � MAX MAX
� Z a � � � �— �
i Q y �
'A � Z o �2 5/8'(67) �
Q � 1 1/4(32) � 4(100) 1 1/4(32) 4(100) �
U O I
� LL
� � �
f � ,,, N Trap Primer
� z �—A—.a Seepage Connection I.F_q_y,J
� N Trap Primer Openings (�en Specified)
� � � (1Mien Specified) '�H6 3/4(170) �� "6 3/4(170) Seepage
° � F Z Openings
� ' A(Pipe Size)=02(50),03(75),04(100),05(125)or O6(150) �
<
� } � NO-HUB OUTLET SPEEDI-SET OUTLET �
0 0 � �Fig.2005Y......(A)ROUND TOP �Fig.2005L......(A)ROUND TOP
`� j � Fig.2005Y.......(B)SQUARE TOP Fig.2005L......(B)SQUARE TOP
o �
�
G a
E Q Outlet Nickel Bronze 'Collar 'Collar Free Area
t � Strainer In High In Low SQ IN
Sae Strainer Head Size i i si' n C �
u � 02 50 05 125 DIA or SQ g X �
� 03(75 06 150 DIA or SQ DIA or SQ MIN AX M R ND
, �_ m c � � oa(100) 08(205)DIA or SQ � OS 125
W ~ $ os iso
� w � � 07 160
: V Z � 08 205 1 1/2 38 1/2 64 1 25 7 7 8 48 17 110 1 90
! � •09(230 1 1/2 38 2 3/8 60 1 25 1 7/B 48 18 116 16 103
o ♦This dimension to internai slop of speedi-set gasket. � '�0(255) ����3g�2 3/g�gp �(ZS 1 7/8(48) 23(48 16 103
, � i •Add 3/8"(10)to all miNmax dimensions for round strainers.
a}o' ' Z 'Collar is reversible to obtain extreme high and low strainer
a, � positions.
W ••Not available for 5"(125)size strainer. �
� ° "MIN 6 3/4"(170)hole required Tor core drilled application.
� � W �
,, Q� REGULARLY FURNISHED: VARIATIONS: OPTIONAL MATERIALS: �
Duco Cast Iron Body with Flashing Flapper Type Backwater Valve-V Bronze Body-BB
_ Z Collar and Adjustable Strainer Head �Hinged Grate-H Chrome Plated Strainer-CP
� as Indicated by Suffuc Letter Selected. L Speedi-Set Service Weight Galvanized Cast Iron Body-G
0 2(50),3(75)8 4"(100)on Nickel Bronze SVainer-NB
,- N
'' � ~ NOTE:Dimensions show � LXH S edi-Set ExVa Hea Polish
� � PQ �Y ed Bronze Strainer-PB
� pare�theses are in miUimeters. 2(50),3(75)&4"(100)only Stainless Steel(Specity Fig.9700-A) '
O � �Meets ASME Standard A172.6.3-2001 eSediment Bucket-B
� O � Trap Primer Connection-P050
` 02(50),03(75)or 04"(100)sizes only. �
y 1/2"(13)8-P075 3/4"(19) �
N o Vandal Proof Screws-U SEE PM0457 FOR �
i Wide Flanged SVainer(Specify OPTIONAL STRAINER HEADS. �
�` � Fig.DX2005)
° QT Threaded Outlet �
c-:=�. M 10/24/06 NO-HUB to SPEEDI-SET WE�GHT VOLUME FIGURE NUMBER �
W� L 9/22/06 Revised ANSI Note RN CL POUNDS CUBIC FEET
`� E`� 2005
� �m K OS/10lOS Revised ANSI Note JJ AM
�? J 04/10/03 Added 6"to Pi e Size JJ CL
�Z REV. DATE DESCRIPTION BY CKD.
�
� i � � � �l
; ��
,_ �CERT/FIED
� � MODEL
'� � Z358.12004 �
�� ._ .........�.................................................................................................................... �
a; � � Swing-Down Eye and Eye/Face Wash �
�
' � Model S19-270HD (Shown), S19-270HW �
Model S19-270JD, S19-270jW
; � • Complies with ANSI Standard Z358.1-2004 1�9" a.5' �
- • Deck or Wall Mounting Models w/Locking (48mm) (114mm) �
� Mcchanism �
�� • Chrome-Plated Brass Pipe and Fittings �
• Universal Sign and Inspection Tag Included �
4
� • Full, One-Year Warranty o �
r � 2.0" �
Specifications (51mm)
Unit design saves space and fits easily into any work
� environment.Eye and eye/face washes operate quickly by �
� pulling swing um down 90°over sink.Deck or wall �
mounted design availablc,both with locking mechanism. �
° Safe,stcady water flow under varying water supply �
� conditions from 30-90 PSI is assured by integral flow control �
,? � in the shank. (S19-270HD and S19-270HW only) �
�
; Construction s.5•
� Pipe and fittings are chrome-plated brass.Deck or wall (240mm) �
� mounted models available. � � �
�j � ;
" Standard Equipment a.o• �
� (102mm) I
Standard Sprayhead Assembly �-
� Chrome-plated brass sprayhead assembly with twin,soft flow eye � 2�"
-•- wash heads and protective pop-off sprayhead covers.The integral (51 mm)
flow control assures safe,steady flow under varying water supply � � �
conditions from 30-90 PSI.(S19-270HD and S19-270HW) �'---'� �
� � 1 sN
Eye/Face Wash Sprayhead Assembly (41 mm) �
; Twin perforated disc eye/face wash heads with protective S19-270HD,S19-270-HW
pop-off sprayhead covers. Gende spray bathes eyes and face.
" � (S19-270JD and S19-270JW) �
; Valve 9.5" �
� Chrome-plated brass 1/2" IPS stay-open valve.Waterflow is , (240mm) �.
activated by pulling swing arm down 90°.Water will continue �
�� to flow unril arm is returned to original position.
Pipe and Fittings ,
� � Chrome-plated brass 5.5" , �
� Water Supply (140mm) s'
1/2" IPS � �;
I � �
! ' � 2.0"
� � I (51mm)
�' , �
Model No. Description.
�
� � � S19-270HD Swing-Down Eyewash Fixture— S19-270JD, S19-270JW �
�,, Deck Mount
�' ❑ S19-270HW Swing-Down Eyewash Fixture—
�
Wall Mount 4
G
O S19-270JD Swing-Down Eye/Face Wash �.
� Fixture—Deck Mount `
S19-270JW Swing-Down Eye/Face Wash E
� r�� Fixture—Wall Mount ♦w �,
Document No.4472 �� . • �'
� �
This informadon is subject to change without formal nouce. P.O.Box 309,Menomonee Falls,WI 53052-0309 �
OO 2004 Bradley Corporation Phone 1-800-BRADLEY FAX 262-251-5817 �
� 9-29-2004(1 Page Total) Web Site:http://www.bradleycorp.com
EF4472.1 �
�:
�
� i
r E� - � j
�
�
; ��~� �� S19-2000 �
,� � . Emergency Fixture Thermostatic Mixing Vaives �
j�-, � • A�Is ANSI Z358.1-2004 �
� • ReliaDle Liquid-Filled Thermostat with 10-Year Warranry O �
; • Checkstops on Inkts �
` ` , 1 � �
� r�� • Adjustable Set Poim within Temperature Range ♦ �
' � • Accur�e Temperature Control to within:3°F- � �� �
.; • Built-in Cold Water Bypass,Assuring Cold Fiow _ - �
� r'? • Positive Shutoft of Hot Supply When Cold$uppty is Lost
� � �
z '1 • Easy Installation and Serviceabi�iry � � �
♦
; • Dirt and Lime Resistant
'z t` �
• Dial Thermometer
• Facrory F�ssembled and Tested �
; • Universal Mounting Capability � � �
� F
� • Cabinet Features: �
-18 Gauge Body&Door �
-Left-Hand Hinge � �
' ��` -Cylinder Lock �
-InieVOutiet Kncek-Out Holes for Mounting Flexibility � €
-Stainless Steel or Baked White Enamel Finishes � �
; r-•� -Surface-Mounted a Recessed Style with Flange �
, �1 �
� Valve Specifications �
S19-2000
Maximum Operatinp Presaure �
r - 125 PSI(86(1 kPA)
_=Y1 Maximum Inlet Temperature Opt10f18i SBI@CtIOtIS �
' 180°F(82°C) Finish �
' ❑ C Chrome Plated �
' � Recommended Inlet Temperature ,,
120°F(49°C)-140°F(60°C) Cabinets �
Temperature Ranye Set Point � SS Surface Mount Stainless Steel �
Std. 65°f(18°C)to 95°F(35°C) 85°F(29°C) � RS Recessed Slainless Steel �,
' �`� ❑ SE Sudace Mount Nfi�e Enamel
' � FlowCapacities-GPM�LJMin) _ ❑ RE RecessedWhiteEnarnel
�
Min. Pressure Drop PSI(Bar) ❑ W Plexi-glass�ndow in Door �
Model Flow 5 10 15 20 3D 45 60 �
� (.5) (1.0) (1.5) (2.0) (2.5) (3.0) (4.0) �
S14-2000 �•5 3.4 4.5 5.6 6.5 7.8 9.4 11.6 �
(5.5) (15.0) (20.0) (26.0) (30.0) (34.0) (37.0) (42.0) �
�
` � Cold Bypau Oniy Z•6 3.2 4.0 4.6 5.6 6.8 7.7 . �
(10.5) (14.5) (18.0) (21.0) (23.5) (28.5) (29.5) °
� '
r-�
� '
� 3
1'
#
�
` �i Engineer's Approval �
�j m 2010 Bradley Corporatbn �
Plumbing Fixtures Pape 1 of 3 P.O.Box 309,Menomonee Falis,WI 53052-0309 �
Document No.5890 This in(ormation is subject to chanpe without notice. Phone:SOO.BRADLEY(800.272.3539) Fax:262253.4161 �
, I 2/212010 bradleycorp.com i
�� �
c_ '' =� �,
.-�'"�,}'Y .
� �
�
�; k
� �
�
�
.�y�
02-03-2011 Inspection Request Reporting Page �
4:53 pm Vail, CO - Citv Of
Requested Inspect Date: Friday, February 04, 2011 Il� ��
Site Address: 181 W MEADOW DR VAIL � /
WMC
A/PID Information
Activity: B10-0196 Type: A-COMM Sub Type: ACOM Status: APPROVED
Const Type: Occupancy: Use: Insp Area:
Owner: VAIL CLINIC INC
Contractor: VAIL VALLEY MEDICAL CENTER Phone: 970-476-2451
Description: RENOVATION OF EXISTING BIO MEDICAL LAB
Re uested Ins ectio �
: 90 BLDG-Final Requested Time: 09:00 AM
Re stor: Phone:
Co ments: 331-6800
Ass� ned : JMONDRAGON Entered By: MHAEBERLE K
c ion: Time Exp:
� � ' V
�} �� �l��y
, / �� � �
�
� 1�
p �
l �
� P , �,�
Ins ection Histo �
IItem: 410 S ecial Inspect-progress re�t ��`
Item: 30 BL�G-Framing 'Approved`* �
12/13/10 Inspector: sgremmer ion: PA PARTIAL APPROVAL
Comment: Walls only wilf need to seeabove cei g and fire wall completion
Item: 50 BLDG-Insulation *'Approved "'
02/02/11 Inspector: JRM ction: AP APPROVED
Comment:
Item: 60 BLDG-Sheetrock Nail ""`Approved"*
12/27/10 Inspector: JRM Action: PI PARTIAL INSPECTION
Comment: APPROVED WALLS EXCEPT FPR MOTIONS LAB AREA
01/05/11 Inspector: sgremmer Action: AP APPROVED
Comment:
Item: 70 BLDG-Misc. "*Approved**
01/26/11 Inspector: JRM Action: AP APPROVED
Comment: FIRESTOP ABOVE CEILING APROVED
Item: 420 Special Inspect-final rept
Item: 90 BLDG-Final
Item: 503 PW-Final Driveway Grade
Item: 515 PW-Public Improvement
Item: 532 PW-TEMP. C/O
Item: 530 BLDG-Temp. C/O
Item: 516 PW-Warranty Acceptance
Item: 539 PW-FINAL C/O
Item: 538 FIRE-FINAL C/O
Item: 540 BLDG-Final C/O
REPT131 Run Id: 12613
�
/ \
. � MEDICAi�I �', `J �V �(�
� � � ��
� 1370 Harlan Street
/ Lakewood CO 80214
Phone: 3d3-279-2491
Fax: 303-279-7'I 32
�, 1-800-863-3247
� „� www.medairtesting.com
AIR TESTIN6 8� �SERVICES , INC . —�
MEDICAL GAS SYSTEMS NFPA 99.2005 JOBSITE VISIT AND AFFIDAVIT FORM
Facility: �.1'iL V lQ�L'FN �'vi�..b lx,��1��iG�
Address: V rL+��
Job Description: � � \ � �
Contractor: �� '�'l��" Date: � � ��
-,r�(� ����L of Medical Air Testing&Services,Inc.has tested the following equipment for proper operation per NFPA 99,2005 Edition.
� Oxygen Outlets � Nitrous Oxide Outlets � Master Alarm Panels � Vacuum Pump Systems
� Vacuum Inlets � Carbon Dioxide Outlets � Zone Valves —� Air Compressor Systems
Medical Air Outlets WAGD Inlets �- Manifolds
� Nitrogen Outlets � Area Alarm Paneis � Bulk Gas Fields Other: e,(f0„(��
Comments: �- ��� �'�j[J� , ��(,/ �7J�C (��� r
c�
NFPA 99 requires several items to be recognized prior to a medical gas system modification, replacement, remodel,addition to,or new installation
that will be placed into service for patient use. Since a representative from our company was not present during the installation, it is necessary to
have the installer's authorized agent complete and sign the following affidavit:
The following standards have been completed to satisfy the minimum requirements set forth by NFPA 99, 2005 edition for medical gas system
pipeli installations, unless otherwise noted:
� The contractor/installer completed the initial systems blow down NFPA 99, 5.1.12.2.2
� The contractor/installer completed the initial pressure test(150 PSI/press, 60 PSI/VAC) NFPA 99, 5.1.12.2.3
The contractor/installer completed the cross connection test NFPA 99, 5.1.12.2.4
The contractor/installer completed the piping purge NFPA 99, 5.1.12.2.5
The contractor/installer completed the 24 hour standing pressure test NFPA 99, 5.1.12.2.6
The contractor/installer compteted the vacuum system testing NFPA 99, 5.1.12.2.7
I,the undersigned,do hereby declare the following facts regarding the medical gas systems as installed,replaced, remodeled,or modified that are
currently being verified at the above named facility have met or exceeded the minimum requirements as outlined in NFPA 99, 2005 edition as
outlir}ed below:
� The contractor/installer used required materials and practiced compliant storage/handling techniques NFPA 99, 5.1.10
.�, The contractor/installer maintains required brazer/installer qualification credentials NFPA 99, 5.1.10.6.11
,�, The contractor/installer used required techniques for pipeline component preparation and installation NFPA 99, 5.1.10.6.2
� The contractor/installer properly labeled all required components of the medical gas system NFPA 99, 5.1.11 �
System was verified for compliance to NFPA 99, (2005)5.1.12.3; LEVEL 1 LEVEL 2 LEVEL 3 OTHER
3.3.90 LEVEL 1 Medical Piped Gas and Vacuum Systems. Systems serving occupancies where interruption of the Z,��
piped medical gas and vacuum system would place patients in imminent danger of morbidity or mortality. (PIP)
3.3.92 LEVEL 2 Medical Piped Gas and Vacuum Systems. Systems serving occupancies where interruption of the
piped medical gas and vacuum system would place patients at manageable risk of morbidity or mortality. (PIP)
�3.3.94 LEVEL 3 Medical Piped Gas and Vacuum Systems. Systems serving occupancies where interruption of the
piped medical gas would terminate procedures but would not place patients at risk of morbidity or mortality. (PIP)
Meets the minimum NFPA Healthcare Facilities Standard to which the facility was tested.
Does not meet the minimum NFPA Healthcare Facilities Standard to which the facility was tested, unless accepted by the
Authority Having Jurisdiction(Note: NFPA 99(2005)5.1.1.4 states that"An existing system that is not in strict compliance with
the provisions of the standard shall be permitted to be continued in use as long as the authority having jurisdiction has
determined that such use does not constitute a distinct hazard to life.")
Please contact us for retesting if required. The interruption of any medical gas shall be the sole responsibility of the Hospital. It is the responsibility
of the hospital to inform all personnel of the status of the system. This system was installed in complete accordance to NFPA 99,2005 by:
�—� Installer ASSE 6010 Installer# Not Available O
�
� Facility Authorized Representative Position/Job Title Not Available O
Medical Air Testing&Services, Inc. ASSE 6030 Verifier# �lZ� Not Available O