HomeMy WebLinkAboutM10-0272NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT
MWNO VVAp,
Town of Vail, Community Development, 75 South Frontage Road, Vail, Colorado 81657
p. 970 - 479 -2139 f. 970.479.2452 inspections. 970.479.2149
MECHANICAL PERMIT
AMF
Job Address: 5040 MAIN GORE PL VAIL
Location.....: SUNDIAL UNIT A -1
Parcel No...: 210113105007
OWNER LANGEREIS, ARTHUR HENRY
5040 MAIN GORE PL Al
VAIL
CO 81657
APPLICANT JERRY SIBLEY PLUMBING
P.O. BOX 340
MINTURN
CO 81645
License: 152 -M
CONTRACTOR JERRY SIBLEY PLUMBING
P.O. BOX 340
MINTURN
CO 81645
License: 152 -M
11/10/2010
11/10/2010 Phone: 970-827-5736
11/10/2010 Phone: 970-827-5736
Desciption: FURNACE REPLACEMENT, INSTALL NEW SEALED COMBUSTION FLUE:
75,000 BTU 95%
Valuation: $4,300.00
ALL TIMES
Permit #: M10 -0272
Project #: PRJ10 -0744
Status ...:
ISSUED
Applied..:
11/10/2010
Issued . .:
11/17/2010
Expires. .:
05/16/2011
Total Calculated Fees - -> $129.00 Payments - - -- - - -> $129.00
BALANCE DUE - - -> $0.00
APPROVALS
Item: 05100 BUILDING DEPARTMENT
11/13/2010 Martin Action: AP
CONDITION OF APPROVAL
Cond: 12
(BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE.
Cond: 42
(BLDG 2009) CARBON MONOXIDE DETECTORS REQUIRED TO BE INSTALLED PER 2009 IRC R315
+++++++++++++++++++++++++++«+ w+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ w+++++++++++++++++►++++++ ne+ fnt + + + +++++ww++ +w + +++ + + + +++ +m+«+ ++
DECLARATIONS
I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plot plan, and state that all the information
as required is correct. I agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure
according to the towns zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town
applicable thereto.
REQUESTS FOR I HNADE TWENTY -FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM 8:01
AM - 4 PM.
1111
ignature of r or Contractor Date
Name
mechcanica I_perm it_041908
«« « ««« « « « +««« + FEE SUMMARY***"**** +«++++++++++++«««++.«««+«««««««+« +++++. +..+«...
«««« « « ++. «...««.+
Mechanical Permit Fee —>
$100.00
Will Call - - - -> $4.00 Total Calculated Fees - ->
$129.00
Plan Check---- - - - - ->
$25.00
Use Tax Fee ------ > $0.00 Additional Fees- - - - - ->
$0.00
Investigation--- - - - - ->
$0.00
TOTAL PERMIT FEE-->
$129.00
Total Calculated Fees - -> $129.00 Payments - - -- - - -> $129.00
BALANCE DUE - - -> $0.00
APPROVALS
Item: 05100 BUILDING DEPARTMENT
11/13/2010 Martin Action: AP
CONDITION OF APPROVAL
Cond: 12
(BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE.
Cond: 42
(BLDG 2009) CARBON MONOXIDE DETECTORS REQUIRED TO BE INSTALLED PER 2009 IRC R315
+++++++++++++++++++++++++++«+ w+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ w+++++++++++++++++►++++++ ne+ fnt + + + +++++ww++ +w + +++ + + + +++ +m+«+ ++
DECLARATIONS
I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plot plan, and state that all the information
as required is correct. I agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure
according to the towns zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town
applicable thereto.
REQUESTS FOR I HNADE TWENTY -FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM 8:01
AM - 4 PM.
1111
ignature of r or Contractor Date
Name
mechcanica I_perm it_041908
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
TOWN OF VAIL, COLORADO Statement
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
Statement Number: R100001856 Amount: $129.00 11/17/201010:50 AM
Payment Method: Check Init: SAB
Notation: 32074 JERRY
SIBLEY
-----------------------------------------------------------------------------
Permit No: M10 -0272 Type: MECHANICAL PERMIT
Parcel No: 2101 - 131 - 0500 -7
Site Address: 5040 MAIN GORE PL VAIL
Location: SUNDIAL UNIT A -1
Total Fees: $129.00
This Payment: $129.00 Total ALL Pmts: $129.00
Balance: $0.00
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
ACCOUNT ITEM LIST:
Account Code Description Current Pmts
-------------- - - - - -- ------------------------ - - - - -- ------ - - - - --
MP 00100003111100 MECHANICAL PERMIT FEES 100.00
PF 00100003112300 PLAN CHECK FEES 25.00
WC 00100003112800 WILL CALL INSPECTION FEE 4.00
NOV- 05- 2010(FRI) 04:08
V"Complete Mechanical Ro
wl" Combustion Air Duct Size and Location
ta detail or Vent size, location & termination
• Gas Piping layout Including development length calculations
• Heat Loss Calculations
Protect Street Address:
640 Mace—
N 1% 1 1-4tall d1
-07 50
.�D�
Y' Equipment Cut Sheets for Fireplaces/Log Sets
(Manufacturer's Info showing make, model & appn
P. 001 /006
Office Use:
Project #: '� � l - 0A a"'1
Building Permit #: — /IA '
Mechanical Permit V U) - 6 Z
( um er) ( Street 1 Lot V. Block #
Building /Complex Name: CLA I Nam
Defte Sc and Location of Work: � �[.wy�
A
De _
Contractor Information
Company: J 'S `6 1 +tPr•
!
Company Address: l ogo ►
P Y
City 1� &!W..� State: j // Zip: SIG LK
Contact Name:
Contact Phone:
Town of Vail Contractor Registration No.:
Signature
Property infonnatlon
Parcel *. 7-161 - -- A 31— 1 05 — 00 q
(For parcel #, contact Eagle Counry Assessors Office at 970-32&490
or
visit www.eagleccunty.uslpatle)
Tenant Name:
(Commercial Properties)
Owner Name. G �+. l�1d3�C mff�
C� omplete Valuation for Mechanical Permit: (including fireplaces)
Mechanical
C:\ edcv\ forms\permits \building\ineehanicW_pc mil olo►to
Subdivision:
M
ri
M
a
NU
Gas Piping Included
Gas Piping by Others
Wood to Gas Fireplace Conversion
Interior (✓f Exterior ( ) Other ( )
Fireplaces:
Gas Appliances � as Logs Wood/Pellet
Number reposed Fireplaces:
Gas Appliances Gas Logs Wood /Pellet
Typo of Building:
Single- Family ( ) Duplex (Multi- Family ( ) Commercial ( )
Restaurant( ) Other ( )
Date Received:
NOV 0 5 2010
TOWN OF VAIL
MECHANICAL PERMIT
Boiler / Furnace & Fireplace Applications MUST indude:
' rwrL�
om Floor Plan with Dimensions o 9ellerslze & efficiency
NOV- 05- 2010(FRI) OQ;08
� ►' �-r�'
i:�
g&5
k
Q�1
1ir
FU eve
+5L� d'e- [A),-,L d
Ctf
PQ-�
Town of Vail
"L D REVIEWED FOR CODE
COMPLI NCE
/ 1 13 i v
at
BY
o
J
ca Code:
P. 0021006
pX
513
NOV- 05- 2010(FRI) Od:08
P. 003/006
FORM NO. G11 -503
1
, al
�-t �.� 26- 01 CMA-�
VW W0WjVNWM=M
RGRC- SERIES
Model with Input Rates
from 45,000 to 105,000'BTU /HR
[13.19 to 30.77 kW]
(All Models 95 %A.F.U.E.t)
d
,A
¢� member
G
gama
CLASSIC
95% A.F.U.E.
HIGH EFFICIENCY
UPFLOW
GAS FURNACES
The Rheem° 95%A.F.U.E. High Efficiency line of upflow gas
furnaces are designed for utility moms, closets or alcoves.
The design Is certified by CSA.
Features
■ Heat exchanger is constructed of all stainless steel for
maximum corrosion resistance and thermal fatigue
roliablllty.
le Low profile "34 Inch` design Is lighter and easier to han-
dle and leaves room for optional accessories.
• Left or right side gas, electric, and condensate drainage
connections on upflow models.
• Integrated control board manages all operational func-
tions and provides hookups for humidifier and electronic
air cleaner.
• An Insulated blower compartment, a slow - opening gas
valve and a specially designed Inducer system make it
one of the quietest furnaces on the market today.
• Pre -paint galvanized steel cabinet.
• Molded permanent filters.
r Optional Indoor or outdoor combustion air. In addition,
combustion air may be piped to either the top or side of
the cabinet on all upflow models. A special molded fitting
Is provided to ease Installation.
■ Control fuse protection.
• Solid bottom Is standard.
• Control board diagnostics.
A variety of cooling coils and plenums designed to use with
the Classic 95% A.F.U.E. gas furnaces are available as
optional accessories for air conditioning models.
TA.F.UZ VLNWW fool IJIWA un EffWl alculeled In amroNena wlft DuVal
of error ru owl
NOV- 05- 2010(FRI) Oa;08
STANDARD EQUIPMENT
Complomly assembled and wired; heat exchanger. primary: 409 and aluminlmd
409 stainless stool, secondary: 29.40 stainless steel; induced draft; pressure
switches: redundant main gas control; blower compartment door safety switch;
solid state time on/off blower control; limit controls; manual shut -off Valve;
100% safety lock out; cool tan off delay; held selectable heat tan oil dolay; one
hour automatic retry; power and sell -test diagnostics; llama sense current
diagnostics; electronic air cleaner connections; twinning (bunt -In) foaturos;
humidifier connections; humidifier onlof delay; low speed continuous fan
option; single speed option for heating and cooling applications; pressure
regulator for natural and L.P. (propono) gasses; transformer; direct drive, muitl-
speed blower motor. (Please note: a thermostat Is not Included as standard
equipment.)
P. OOd /006
OPTIONAL EQUIPMENT
Side and bottom tiller racks; return air cabinet for all atzos.
NOTE: Furnace Is not hated for use with fuels other than natural or LP.
(propane) gas.
All models can be converted by a qualified distributor or local service dealer to
use LP. (propane) gas without changing burners. Factory approved Idts must
be used to convert from natural to LP. (propane) gas and may be ordered as
optional accessorles from a parts distributor.
For LP. (propane) oporallon, refer to Conversion Kit Index Form.
Rheem Heating, Cooling and Water Healing
NOV- 05- 2010(FRI) 0r1:09
P. 0051006
BEFORE PURCHASING THIS APPLIANCE, READ IMPORTANT ENERGY COST AND EFFICIENCY INFORMATION AVAILABLE
FROM YOUR RETAILER. MEEMEE
PHYSICAL DATA AND SPECIFICATION -U PF ` W MODELS
11 C 2nd f!nnadion Mndole
MODEL NUMBERS
RGRC44'MAES
RGRC-OB'MAES
L RGRC- 07 -MAES
RGRC -07 9 RIGS
RGRC-OB'ZAiS
RGRC- 10'I1W8
HIGH FIRE INPUT BTU/HR WM W
45,000 [13.191
60.000117M]
1
75.000 [21.98]
90,000 (26.38)
106.000 130.771
HEATING CAPACITY BTUMR (k1N]
42,000 [12.31]
56,000 [16.41]
70,000 [20.51]
70,000 [20.51]
84,000•[24.621
100,000 [29271
HIGH ALTITUDE OUTPUT AT 8000'
28,458 [8.341
37,944 [11.121
47,430 (13.901
47,430 113.901
56,915 116.691
66,402 [19A6]
(HIGH FIRE) [kWJ d9
BLOWER (DxW)
[mm]
110
1279 x 1781
110
1279 x 1781
11 x7
1279 x 1781
12x11
1305 x 2791
12x11
[305 x 2701
12x11
[305 x 2791
MOTOR H.P. [W]
t/z [3731 - 4 - PSC
1 12 [373] - 4 - PSC
1/2 [373] - 4 - PSC
1/2 [373] - PSC
e14 [559] - PSC
3 /4 [559]4 - PSC
TYPE
MOTOR FULL LOAD AMPS
GA
6.8
6.8
6.8
9.5
9.5
HEATING SPEED
MED -LO
MED -HIGH
MED -HIGH
MED -HIGH
MED -HIGH
• MED -HIGH
COOLING SPEED
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
MINIMUM Eff. STATIC PRESSURE
10 [.0251
.12 [.029]
.12 [.029]
.12 [.029]
.15 [.0371
20 [.0491
(IN. W.C.) [kPa1
MAXIMUM EXT. STA11C PRESSURE
.50 [.1241
.50 [.124[
.50 [.1241
. .50 [.124)
.50 [.1241
.50 [.1241
(IN. W.C.) [kPa]
HEATING CFM 01' 1.049 kPaJ
88514171
84513961
1050 [4951
1500 [7061
1640 [7741
1445 [6621
W.C. E.S.P. [Us]
COOLING CFM M .5' 1.124 kPa]
119515641
1100 [519]
1110 [524]
1600 [755]
1820 [8591
1810 [854]
W.C. F [US]
TEMPERATURE RISE -HIGH FIRE
RANGE IN DEGREES - F ['C[
30.60
[16.7 -33.3]
40.70
[222 - 38.91
40.70
[222 -38.91
30.60
[16.7 -33.31
35.65
[19.4 -36.11
50.60
[27.844.4]
RETURN AIR CABINETS (OPT.)
C178
C170
C178
C218
C218
C218
RXGR-
FILTER SIZE
(2) 17 x 16'
[305 x 4061
(2)12' x 16
[305 x 4061
(2)12' x 16'
[305 x 4061
(2)12' x 20'
1305 x 5081
(2)12' x 20
1305 x 5061
(2) 17 x 20"
1305 x 5081
ImmJ
STANDARD, HIGH VELOCITY
15 x 25 x 1
153/4 x 25 x 1
15314 x 25 x 1
19 1 /4 x 25'x 1
19 x•25 x 1
191/4 x 25 x 1
PERMANENT FILTER (IN.)
APPROX. SHIPPING WEIGHT
111 [503]
117 [53.1]
124 [56.2]
137 [62.1
148 [67.11
152 [68.9]
(LBS.) f k01
AFUE W
95,096
95.096
95.0%
95.0%
95.0%
95.0%
NOTES: All models are 115V, 60HZ,1 phase Gas connocilon slzo for all models, Is lk [13 mm] N.P.T.
d) See Conversion Kit Index Form for high altitude dente.
m Canadian Installatlous only.
co In accordance with D.O.E. lost procedures.
'E ■Standard
"N■NOx Models
MODEL IDENTIFICATION Ia�E
R G R C � M
® ( o o - o
Rheem Gas Upflow/ Design Heating Input Blower Site
Furnace Condensing Series Designation 11 x 7
Gas Furnace 1279 x 178 mm]
R all x 10
[279 x 254 mm]
Z ■12x11 -
(305 x 279 mm)
[ I DeWgnaocs Metric Conversions
d)
O
nations
Sld.
HeaUCool
Deslgnatlon
I Code
S .S. and
Cabinot
E>1100.1300 CFM
Canadian
B - Edo
[510.613.5 Us]
Natural Gas
Cabinet
G = 1500.1700 CFM
[707.9.602.3 Us]
J a 1900 -2100 CFM
[896.7 -991.1 Us]
Rheem Heating, Cooling and Water Heating
I,NOV- 05- 2010(FRI) 0Q,09 P.006/006
UPFLOW MODELS
TOP
[[�� mm OIA, I
CON>SENSA
1 DRAIN r l 965 mm)
1 I 11
i OPTIONAL RETURN AIR CUTOUT I mm]
((EITHER SID FOR USE WITH
ETERNAL 91�E FILTER F1�AME
1885 mm) 1241 mm)
LEFT SIDE
[672 mm]
GAS C" =ON 7
>' /a'(� mm as (5
ELEA CONNECTION
261.' (876 mm) (HIGH VOLTAGE)
? /s' 122 mm,] OIA. — 27
------ CoW TALE I . (895 mm)
rR 25112
(848 mm]
A 19 1' .
(16 mm) 9 115 mmI
F_
SUPPLY AIR
19 ml
ALT COMBUSTION
AIR IN
FRONT
I= =30
11 ple'
1292 mm1
W [m
24 i1 I ola 24"s• 118 mm[ .
2•
161 mml DIA- KNOCOUT
ALT. G CONNECTION
[878 mm]
7. (� mm MA. KNOCImUT
ALT. ELECfR�CAL CONNECTION
nw* 122 mni DIA. IWOCIOUT I
ALT Low vwme VVIRING I
I i
1 1$'
1 71/a• 120 mm DUL IWOCKOUT 1381 mm[
I ALT. CONDENSATE DRAIN 1
� I
I �
ry�
)584 mml
2J hs'
INS mm]
RIGHT SIDI[f
n[
4 Flheem Heating, Cooling and Water Heating
mml
?NT OUTLET
r
COVUSTION
AIR INLET
147 /mm) ; :F
all 28Hw'
110 mm) —�{ 1713 mml •x
I r 0 115 mml
D I � 16o�mm1
141111 �
27*1/r'
]710
[ ] Designates Motrlo Convemlons
MINIMUM CLEARANCE
(IN.) [mm]
SNIP
MODEL
RGRC•
A
8
C
D
E
F
SIDE
RIGHT SACK
TOP
FRONT VENT
WETS.
[k01
SIDE
04EM
171/214451
1611/32 [415]
15 [397]
2 [51]
15 14221
1394m [352]
0
0 0
1
2 [51 0
111 [50]
OSEM
17 (445]
16 (415]
15514 [397]
2 [511
15 14221
13a/m 1352
0
0 0
1251
2 [51] 1 0
1 117 [531
7EM
17 (4451
18 /3z (415)
15
2151
15 4221
13m/n [952]
0
0 0
1
2 1511 0
124 [561
7 ER
21 [533]
192 [504]
19
2 (611
16 (511]
17o /2z (441]
0
0 0
1 (25]
2151 0
137 521
9EZ
rQ10E
21 1533
1977/3z 5041
19 [4871
2 [51)
181h [5111
17 (441
0
0 0
1 251
2 51 ] 0
148 [67]
21 [533]
1927/32 504]
19 [487]
2 [51]
18 15111
179/32 (441]
0
0 0
1 (25]
2 [51] 0
1521691
4 Flheem Heating, Cooling and Water Heating
mml
?NT OUTLET
r
COVUSTION
AIR INLET
147 /mm) ; :F
all 28Hw'
110 mm) —�{ 1713 mml •x
I r 0 115 mml
D I � 16o�mm1
141111 �
27*1/r'
]710
[ ] Designates Motrlo Convemlons
12 -03 -2010 Inspection Request Reporting Page 25
8:52 am Vail, CO - City Of
Requested Inspect Date: Friday, December 03, 2010
Inspection Area: MH
Site Address: 5040 MAIN GORE PL VAIL
SUNDIAL UNIT A -1
A /P /D Information
Activity: M10 -0272 Type: B -MECH Sub Type: AMF Status: ISSUED
Const Type: Occupancy: Use: Insp Area: MH
Owner: LANGEREIS, ARTHUR HENRY
Contractor: JERRY SIBLEY PLUMBING Phone: 970 - 827 -5736
Description: FURNACE REPLACEMENT, INSTALL NEW SEALED COMBUSTION FLUE: 75,000 BTU 95%
Requested Inspe
Item:
Requestor:
Comments:
Assigned To:
ction:
ction s
39 MECH -Final
JERRY SIBLEY PLU BING
UNIT A -1, CALL 30 NUTES PRIOR
Time Exp: .
Requested Time: 10:30 AM
Phone: 970 - 827 -5736
Entered By: DRHOADES K
J
Inspection History
Item: 310 MECH- Heating
Item: 390 MECH -Final
jlr E
C Jai
v �
� � L
lei 5
V ��
v�
S�
REPT131 Run Id: 245