The URL can be used to link to this page

Home My WebLink AboutE10-0319MWNor VAS' . Town of Vail Community Development 75 South Frontage Road, Vail, Colorado 81657 p. 970.479.2139 f. 970.479.2452 inspections 970.479.2149 ELECTRICAL PERMIT Job Address: 244 WALL ST VAIL Location.......: BURTON SPACE Parcel No.....: 210108251006 OWNER VAIL INVESTORS LLC 11/15/2010 50 S SIXTH ST STE 1480 MINNEAPOLIS MN 55402 APPLICANT BILCOR CONTRACTING LLC 12779 W BELLEVIEW AVE LITTLETON CO 80127 License: 446 -E CONTRACTOR BILCOR CONTRACTING LLC 12779 W BELLEVIEW AVE LITTLETON CO 80127 License: 446 -E Permit #...: E10 -0319 Project #..: PRJ10 -0760 Issued......: 11/22/2010 11/15/2010 Phone: 303-972-5884 11/15/2010 Phone: 303-972-5884 Desciption of Work: REMOVE EXISTING LIGHTS AND DEMO CIRCUITS, REPLACE TRACK HEADS WITH NEW, DEMO OUTLETS, REPAIR MISC ITEMS. Valuation: $16,500.00 Square feet: 2200 CONDITIONS OF APPROVAL Cond: 12 (BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE. Cond: 42 (BLDG 2009) CARBON MONOXIDE DETECTORS REQUIRED TO BE INSTALLED PER 2009 IRC R315 1i&W* *A111 Is] .6� If more than two inspections are performed an additional inspection fee will be applied for each inspection requested /needed. All electrical inspections are performed on Tuesdays and Thursdays. Requests must be received the day before and not later than 4 p.m. DECLARATIONS I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plot plan, and state that all the information as required is correct. I agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure according to the towns zoning and subdivision codes, design review approved, Intern_a4nal- �,¢and Residential Codes and other ordinances of the Town applicable thereto. SIGNATURE: �% ( _ Date !/,— Z Z — 2,0 / y (Master / homeowner / or non - licensed contractor orming work) �� PRINTED NAME: "mil syd elec_permi 100109 TOWN OF VAIL, COLORADOCopy Reprinted on 11 -22 -2010 at 09:25:29 11/22/2010 Statement Statement Number: R100001876 Amount: $646.33 11/22/201009:25 AM Payment Method: Check Init: BG Notation: Bilcor ----------------------------------------------------------------------------- Permit No: E10 -0319 Type: ELECTRICAL PERMIT Parcel No: 2101 - 082 - 5100 -6 Site Address: 244 WALL ST VAIL Location: BURTON SPACE Total Fees: $646.33 This Payment: $646.33 Total ALL Pmts: $646.33 Balance: $0.00 ACCOUNT ITEM LIST: Account Code -------------------- 00100003111100, GFPO EP 00100003111100 PF 00100003112300 UT 11000003106000 WC 00100003112800 Description Current Pmts ------------------------ - - - - -- ------ - - - - -- ELEC PERMIT FEES- GFP012 230.00 ELECTRICAL PERMIT FEES 80.50 ELEC PLAN REVIEW 201.83 USE TAX 4% 130.00 WILL CALL INSPECTION FEE 4.00 io �F AF Department of Community Development 75 South Frontage Road Vail, Colorado 81657 Tel: 970 -479 -2128 Fax: 970 -479 -2452 ' Web: www.vailgov.com . Development Review Coordinator . ELECTRICAL PERMIT Electrical Permit Submittal Requirements Including Heat Tape Installation ❑ Floor plan / Site plan showing proposed work • Building Type • Occupancy Group listed on plans • Load Calculations and one -line diagram when loads or circuits are being added NOTE: For Multi - Family and Commercial buildings —plans and calculations must be prepared by a Colorado Licensed Electrical Engineer Project Street Address: (Number) (Street) (Suite #) Building /Complex Name: Burton at One Vail Place Contractor Information: Company: Bilcor Contracting,LLC Company Address: 12779 West Belleview Ave. City: Littleton State: CO Zip: 80127 Contact Name: William Schuh Contact Phone: 720- 353 -7032 E -Mail bill @bilcor.net Town of Vail Contra tion o ?4245 X Contractor Signature (required) Property Information Parcel #: Cl: 2101- 082 -51 -006 , L-, C-' (For parcel #, contact Eagle County Assessors Office at 970 - 328 -8640 or visit www.eaglecounty.us /patie) Tenant Name: Burton Owner Name: Vail Resorts Provide BOTH square footage of area of work AND Valuation (Labor & Materials) ,130 - Amount of SQ Ft.: 2200 Electrical $: 16,500.00 Office Use: Project #: T ,� / .- Q -7 e n Building Permit #: 111A- Electrical Permit #: C-10 - 0 319 Lot #: Block # Subdivision: Define Scope and Location of Work. Remove exisitng Lights and demo ckts, replace track heads with new, demo outlets, repair Misc. items (use additional sheet if necessary) Includes Temporary Service: ( ) Yes ( ) No Work Class: New ( ) Addition ( ) Remodel ( pair ( Q/ Other v N P"-A f" 10 J Type of Building: Single - Family ( ) Duplex ( ) Multi - Family (V� Commercial ( ) Restaurant( ) Other( ) Date Received: 0 t )W 1 zwo TOWN OF VAiL 01- Jan -10 COMcheck Software Version 3.8.0 Interior Lighting Compliance Certificate 2009 IECC Section 1: Project Information Project Type: Alteration Project Title : Burton at One Vail Place Construction Site: Owner /Agent: Designer /Contractor: Vail, CO 81657 William Schuh Bilcor Contracting, LLC 12779 west belleview Ave. littleton, CO 80127 303 - 972 -5884 bill @bilcor.net Section 2: Interior Lighting and Power Calculation A B C D Area Category Floor Area Allowed Allowed Watts (U) Watts / ft2 (B x C) Retail 2200 1 s ql�nn Total Allowed Watts = 3300 Area Category Exemption Qualifications Total Wattage Total Pre -Alt. # Fixtures Area _ _ Pre -Alt. Post -Alt. Fixtures ReDIJAdde Section 3: Interior Lighting Fixture Schedule A Fixture ID: Description / Lamp / Wattage Per Lamp / Ballast Retail (2200 sq.ft.) 4" LV can lights: Incandescent 35W Track lighting 1: Wattage based on total luminaires Linear Fluorescent 1: 48" T8 32W / Electronic 4" can lights: Incandescent 35W Section 4: Requirements Checklist Lighting Wattage: J 1. Total proposed watts must be less than or equal to total allowed watts. Allowed Watts Proposed Watts Complies 3300 3222 Passes B C D E Lamps/ # of Fixture (C X D) Fixture Fixtures Watt. 1 12 35 420 0 0 0 1980 2 3 64 192 1 18 35 630 Total Proposed Watts = 3222 Controls, Switching, and Wiring: LU 2. Daylight zones under skylights more than 15 feet from the perimeter have lighting controls separate from daylight zones adjacent to vertical fenestration. Lj 3. Daylight zones have individual lighting controls independent from that of the general area lighting. Project Title: Burton at One Vail Place Report date: 11/10/10 Data filename: C: \Documents and Settings \Willaim Schuh \My Documents \COMcheck \Burton.cck Page 1 of 4 Exceptions: ❑ Contiguous daylight zones spanning no more than two orientations are allowed to be controlled by a single controlling device, ❑ Daylight spaces enclosed by walls or ceiling height partitions and containing two or fewer light fixtures are not required to have a separate switch for general area lighting. LJ 4. Independent controls for each space (switch /occupancy sensor). Exceptions: ❑ Areas designated as security or emergency areas that must be continuously illuminated. ❑ Lighting in stairways or corridors that are elements of the means of egress. ❑ 5. Master switch at entry to hotel /motel guest room. ❑ 6. Individual dwelling units separately metered. ❑ 7. Medical task lighting or art/history display lighting claimed to be exempt from compliance has a control device independent of the control of the nonexempt lighting. Lj 8. Each space required to have a manual control also allows for reducing the connected lighting load by at least 50 percent by either controlling all luminaires, dual switching of alternate rows of luminaires, alternate luminaires, or alternate lamps, switching the middle lamp luminaires independently of other lamps, or switching each luminaire or each lamp. Exceptions: ❑ Only one luminaire in space. ❑ An occupant- sensing device controls the area. ❑ The area is a corridor, storeroom, restroom, public lobby or sleeping unit. ❑ Areas that use less than 0.6 Watts /sq.ft. ❑ 9. Automatic lighting shutoff control in buildings larger than 5,000 sq.ft. Exceptions: ❑ Sleeping units, patient care areas; and spaces where automatic shutoff would endanger safety or security. ❑ 10. Photocell /astronomical time switch on exterior lights. Exceptions: ❑ Lighting intended for 24 hour use. ❑ 11.Tandem wired one -lamp and three -lamp ballasted luminaires (No single -lamp ballasts). Exceptions: ❑ Electronic high- frequency ballasts; Luminaires on emergency circuits or with no available pair. Section 5: Compliance Statement Compliance Statement: The proposed lighting alteration project represented in this document is consistent with the building plans, specifications and other calculations submitted with this permit application. The proposed lighting alteration project has been designed to meet the 2009 IECC, Chapter 8, requirements in COMcheck Version 3.8.0 and to comply with the mandatory requirements in the Requirements Checklist. sd / � mil/ /��Ct i �U UG✓�1ili✓ ` ;r " �' ( / l / o AV Name - Title Signature Date Project Title: Burton at One Vail Place Data filename: C:1Documents and SettingslWillaim SchuhWy DocumentslCOMchecklBurton.cck Report date: 11/10/10 Page 2 of 4 ' COMcheck Software Version 3.8.0 Exterior Lighting Compliance Certificate 2009 IECC Section 1: Project Information Project Type: Alteration Project Title : Burton at One Vail Place Exterior Lighting Zone: 4 (High activity metropolitan commercial district) Construction Site: Owner /Agent: Vail, CO 81657 Designer /Contractor: William Schuh Bilcor Contracting, LLC 12779 west belleview Ave. littleton, CO 80127 303 - 972 -5884 bill @bilcor.net Section 2: Exterior Lighting Area /Surface Power Calculation A B C D Exterior Area /Surface E F Quantity Allowed Tradable Allowed Proposed Watts Wattage Watts Watts Free standing /attached sales canopy / Unit (B x C) 6 1 Yes 6 300 Total Tradable Watts* = 6 300 Total Allowed Watts = Wattage tradeoffs are only allowed between tradable areas /surfaces Total Allowed Supplemental Watts *` = 1300 *` A supplemental allowance equal to 1300 watts may be applied toward compliance of both non - tradable and tradable areas /surfaces. Section 3: Exterior Lighting Fixture Schedule A Fixture ID : Description / Lamp / Wattage Per Lamp / Ballast Free standing /attached sales canopy (6 ft2): Tradable Wattage Incandescent 1: Incandescent 50W Section 4: Requirements Checklist B C D E Lamps/ # of Fixture (C X D) Fixture Fixtures Watt. 1 6 50 300 Total Tradable Proposed Watts = 300 Lighting Wattage: lJ 1. Within each non - tradable area /surface, total proposed watts must be less than or equal to total allowed watts. Across all tradable areas /surfaces, total proposed watts must be less than or equal to total allowed watts. Compliance: Passes using supplemental allowance watts. Controls, Switching, and Wiring: Lj 2. All exemption claims are associated with fixtures that have a control device independent of the control of the nonexempt lighting. 3. Lighting not designated for dusk -to -dawn operation is controlled by either a a photosensor (with time switch), or an astronomical time switch. Lj 4. Lighting designated for dusk -to -dawn operation is controlled by an astronomical time switch or photosensor. Li 5. All time switches are capable of retaining programming and the time setting during loss of power for a period of at least 10 hours. Exterior Lighting Efficacy: Project Title: Burton at One Vail Place Data filename: C: \Documents and Settings \Willaim Schuh \My Documents \COMcheck \Burton.cck Report date: 11/10/10 Page 3 of 4 6. All exterior building grounds luminaires that operate at greater than 100W have minimum efficacy of 60 lumen /watt. Exceptions: ❑ Lighting that has been claimed as exempt and is identified as such in Section 3 table above. ❑ Lighting that is specifically designated as required by a health or life safety statue, ordinance, or regulation. ❑ Emergency lighting that is automatically off during normal building operation. ❑ Lighting that is controlled by motion sensor. Exterior Lighting PASSES: Design 0.0% better than code. Section 5: Compliance Statement Compliance Statement: The proposed exterior lighting design represented in this document is consistent with the building plans, specifications and other calculations submitted with this permit application. The proposed lighting system has been designed to meet the 2009 IECC requirements in COMcheck Version 3.8.0 and to comply with the mandatory require its in the Requirements Checklist. Name -Title Signature Date Project Title: Burton at One Vail Place Data filename: C: \Documents and Settings \Willaim Schuh \My Documents \COMcheck \Burton.cck Report date: 11/10/10 Page 4 of 4 12 -06 -2010 Inspection Request Reporting CM � t) -+� 0 A Y---r-k Page 37 6:22 pm Vail. C Of Requested Inspect Date: Tuesday, December 07, 2010 Site Address: 244 WALL ST VAIL BURTON SPACE A/P /D Information Activity: E10 -0319 Type: B -ELEC Sub Type: ACOM Status: ISSUED Const Type: Occupancy: Use: Insp Area: Owner: VAIL INVESTORS LLC Contractor: BILCOR CONTRACTING LLC Phone: 303 - 972 -5884 Description: REMOVE EXISTING LIGHTS AND DEMO CIRCUITS, REPLACE TRACK HEADS WITH NEW, DEMO OUTLETS, REPAIR MISC ITEMS. Requested Inspections Item: 190 ELEC -Final Requestor: BILCO TRACTING LLC Assigned To: R Action. Time Exp: z alp (501, Inspection History Item: 120 ELEC -Rough ** Approved ** 11/23/10 Inspector: sgremmer Comment: Item: 190 ELEC -Final Requested Time: 01:30 PM Phone: CRAIG 303 - 725 -2244 Entered By: SBELLM K Action: AP APPROVED REPT131 Run Id: 12270