HomeMy WebLinkAboutF11-0068TOWN OF VAIL FIRE DEPARTMENT
75 S. FRONTAGE ROAD
VAIL, CO 81657
970-479-2135
VAIL FIRE DEPARTMENT
NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL TIMES
SPRINKLER PERMIT Permit #: Fl ]-0068
Job Address: 1 VAIL RD VAIL Status ...: ISSUED
Location.....: FOUR SEASONS HOTEL Applied ..: 11/21/2011
Parcel No...: 210107122001 Issued ..: 12/06/2011
Project No : Expires . .:
OWNER VAIL HOTEL 09 LLC
ATTN: GENER.AL COUNSEL
745 SEVENTH AVE
NEW YORK
NY 10019
APPLICANT ALL STATE FIRE PROTECTION,
10045 E 76TH AVE, #12
COMMERCE CITY
CO 80022
License: 370-5
CONTRACTOR ALL STATE FIRE PROTECTION,
10045 E 76TH AVE, #12
COMMERCE CITY
CO 80022
License: 370-5
Uesciption:
INTO ONE.
Valuation:
11/21/2011
I 11/21/2011
I 11/21/2011
Phone: 303-288-3901
Phone: 303-288-3901
ADD/RELOCATE 7 SPRINKLERS. COMBINE 2 TENANT CONTROL VALVES
$3,000.00
+e*****►**�*+*�+****�**�*�*�**+**s**�s***s*s**�r�*r*��*++****+**�++* FEE SUMMARY *+***�*+*�**r*s***+**+*��*++****s�*���******�***��*r*�***
Mechanical---> $o . 00 Restuarant Plan Review--> $o . 00 Total Calculated Fees---> $559. 50
Plan Check---> $432. oo DRB Fee---------------------> $0.00 Additional Fees-----------> ($343 .50)
Investigation-> $o . 00 TOTAL FEES--------------> $559. 5o Total Permit Fee----------> $216. 00
Will Call-----> $0 . 00 Payments-------------------> $216. 00
BALANCE DUE---------> $0. o0
*r��*�*�**�«*aas�*►��**+*****rr**s�***s**r*�*�**+***�+�*****�*s***�**+�**e**�**►►**********s*�*�*�s**s**aa�*�r**��*►*►►****�*****s�*�a*+r***r
Item: 05100 BUILDING DEPARTMENT
Item: 05600 FIRE DEPARTMENT
11/30/2011 mvaughan Action: AP
CONDITION OF APPROVAL
Cond: 12
(BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE.
Cond: 53
(FIRE 2007) Monitored fire sprinkler system required and shall comply with NFPA
13 (2007) and VFES Standards.
**A#***#k#####4*+k�**#�F###4k#�R4#**k+k�*#*#�**#fi#*�*#*****k##**#M*�#i+k�k##�##+M�#****���****+k���R*Y*t�*#***�+k#�*##�4*��**�####***+k�*��MM�*i#�t*i��
DECLARATIONS
1 hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plot plan,
and state that all the information as required is correct. I agree to comply with the information and plot plan, to comply with all
"I'own ordinances and state laws, and to build this structure according to the towns zoning and subdivision codes, design review
approved, International Building and Residential Codes and other ordinances of the Town applicable thereto.
REQUESTS FOR INSPECTION SHALL BE MADE TWENTY-FOUR HOURS IN ADVANCE BY TELEPHONE AT 970-479-2252
FROM 8:00 AM - 5 PM. r, �.�7� �%
S[GNA�`URE OF OWNER OR CONTRACTOR FOR HIMSELF AND OWNEF
�*�********�***��**************�*******************************************�**********�*****
TOWN OF VAIL, COLORADO Statement
*�***********�**********�*************+*********�********�**************+*******************
Statement Number: R110001725 Amount: $216.00 11/30/201101:00 PM
Payment Method:Credit Crd Init: DR
Notation: VISA MICHAEL
KRZASTEK
-----------------------------------------------------------------------------
Permit No: F11-0068 Type: SPRINKLER PERMIT
Parcel No: 2101-071-2200-1
Site Address: 1 VAIL RD VAIL
Location: FOUR SEASONS HOTEL
Total Fees: $216.00
This Payment: $216.00 Total ALL Pmts: $216.00
Balance: $0.00
**********�s*************************************************************************�******
ACCOUNT ITEM LIST:
Account Code Description Current Pmts
-------------------- ------------------------------ ------------
PF 00100003112300 PLAN CHECK FEES 216.00
TOWN OF UAIL COM DEU
15 S FRONiR6E RD.
UAIL� CO 81651
978-479-1324
iERMIHAI I.D. � 2892
l�RCHANT k;
UISA
�#t�#tt#t#ti�3869i
SALE
BRTCH; BBB394 I NU : 000002
AUTH:030679
NOU 30� 11 12:55
TOTpL 5216.00
CUSTOIER COPV
�I'OWN OF VAIL FIRE DEPARTMENT
75 S. FRONTAGE ROAD
VAIL, CO 81657
970-479-2135
VAIL FIRE DEPARTMENT
NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL TIMES
SPRINKLER PERMIT
Job Address: 1082 RIVA GLEN VAIL
Location.....:
Parcel No...: 210105301003
Project No :
OWNER 1082 RIVA GLEN ROAD LLC
210 VIA DEL MAR
PALM BEACH
FL 33480
APPLICANT ALL STATE FIRE PROTECTION,
10045 E 76TH AVE, #12
COMMERCE CITY
CO 80022
License: 370-5
CONTRACTOR ALL STATE FIRE PROTECTION,
10045 E 76TH AVE, #12
COMMERCE CITY
CO 80022
License: 370-5
Desciption:
ADDITION.
Valuation:
11/15/2011
I 11/15/2011
I 11/15/2011
Permit #: F11-0066
Status . . . : ISSUED
Applied . . : 11/15/2011
Issued . . : 11/28/2011
Expires . .:
Phone: 303-288-3901
Phone: 303-288-3901
EXTEND EXISTING SPRINKLER SYSTEM INTO NEW LOWER LEVEL
$4,900.00
+�**«**+****:r*+*���****�**►►s****#*�*�r*r�a�*��**+a****►**��r*++*»*► PEF,SUMMARY +********t*��******�*********��****►***�*►�***++�a*��***+
Mechanical---> $0. 00 Restuarant Plan Review--> $0 . 00 Total Calculated Fees---> $640 . 25
Plan Check---> $432 . 0o DRB Fee---------------------> $0. oo Additional Fees-----------> $o . 00
Investigation-> $0.00 TOTAL FEES--------------> $640.25 Total Permit Fee----------> $640.25
Will Call-----> $0.0o Payments-------------------> $640.25
BALANCE DUF,---------> $0 . 00
**:...**,+..*w***«..*:.►.+**.*.�...*..*+«:*�*s*.++.+���**....++..+*..�+*+..:+�s*..+.■..*.....rr«**..�r��a�.«**.+*.***..+a*►***.��.•�+.*�.**.*
Item: 05100 BUILDING DEPARTMENT
Item: 05600 FIRE DEPARTMENT
11/17/2011 mvaughan Action: AP
CONDITION OF APPROVAL
Cond: 12
(BLDG.): FIELD INSPECTIONS ARE REQUIRED TO CHECK FOR CODE COMPLIANCE.
Cond: 53
(FIRE 2007) Monitored fire sprinkler system required and shall comply with NFPA
13 (2007) and VFES Standards.
*:..*�.�..+,:...*�+«�++:.�.,+.��*���..«.*.*..*.+..►.***�**��.+..:+*..*..*.�..�*��**.*,�*�.+.....+.�.....:..�,:**�.*....+,.**��...«..+*****.***..
DECLARATIONS
I hereby acknowledge that I have read this appiication, filled out in full the information required, completed an accurate plot p1an,
and state that all the information as required is correct. 1 agree to comply with the information and plot plan, to comply with all
I'own ordinances and state laws, and to build this structure according to the towns zoning and subdivision codes, design review
approved, International Building and Residential Codes and other ordinances of the Town applicable thereto.
REQUESTS FOR INSPECTION SHALL BE MADE TWENTY-FOUR HOURS IN ADVANCE BY TELEPHONE AT 970-479-2252
FROM 8:00 AM - 5 PM.
SIGNATURE OF OWNER OR CONTKACT�R FOR HIMSELF AND OWNEF
***********************�*+*********************************+*************++************+++**
TOWN OF VAIL, COLORADO Statement
+++**+****************************************************++*************+*+*********+******
Statement Number: R110001702 Amount: $640.25 11/28/201110:48 AM
Payment Method:Credit Crd Init: SAB
Notation: VISA - ALL
STATE FIRE PROT.
-----------------------------------------------------------------------------
Permit No: F11-0066 Type: SPRINKLER PERMIT
Parcel No: 2101-053-0100-3
Site Address: 1082 RIVA GLEN VAIL
Location:
Total Fees: $640.25
This Payment: $640.25 Total ALL Pmts: $640.25
Balance: $0.00
*******************************************************�***************+********************
ACCOUNT ITEM LIST:
Account Code
--------------------
BP 00100003111100
PF 00100003112300
Description Current Pmts
------------------------------ ------------
SPRINKLER PERMIT FEES 208.25
PLAN CHECK FEES 432.00
-----------------------------------------------------------------------------
�'� `' � �° � Department of Community Development,
�� �` � "���;,�j ' � �� � 75 South Frontage Road
,
- y�
�lM..� S" $ 'Y�', s}� U� �_wlc� 1. � • � ' '� . • V N i
.
. .
. WS r
� . <•., =, , ., : , ' "�. "� �- Vai1,-CQlorado 8965.7,�
x' ��. � �' �-+�� � `�. �Te�:� 970�79"2��18 �
����,��; ',' ,�, " � ��1 "., �; �, ti�
, .' ` �A � T � � '+ . .
d ; , ,� � - �+ {' . , Fax: 970-479-2452 ''
y " r
, .
`,� � ` R� * . ` . . - �,. � ,. � ""�►�a` , . ,�.��, , e elo �m n� R`i+vww;vaHgov.com
�- '� ,�y � �+,p C
.,
..-^ , ay . v}
;,�:�;���t � � � ' � � y� e oord n�ore.
� � 'r r R
s�. , - �
� t { j���r� S ' _ , ;�, . 3 � rl i�� #�.� .i. - i� ���„ - y�ty ., i,t �
.., ,.
� . ,
@
� ,
. .
- � � . � .,: �.ti;y , �`,�1
_..,a.�.z.... _ �I._....� ._.>...._.Y _.._... - a . ,
FIRE SPRINKLER PERMIT
Commercial & Residential Fire Alarm shop drawings are required at the time of
application submittal and must include the following information:
1. A Colorado Registered Engineer's stamp or N.I.C.E.T level III (min) stamp
2. Equipment cut sheets of materials
3. Hydraulic calculations
4. A State of Colorado contractor registration number
5. Plans must be submitted by a Registered Fire Protection Contractor
Project 5treet Address:
1 Vail Rd
(Number) (Street)
Building/Complex Name: Four Seasons
Contractor Information:
Company: All-State Fire Protection, Inc.
Company Address: 6045 E. 76th Ave #12
City: Commerce City State: CO
546
(Suite #)
� O�ce Use:
Projeci #: PRS � �� �(pg �
Building Permit #: �� �� � � g`'[
Sprinkler Permit #: � � � " � �8
� Lot #: Block # Subdivision:
� Detailed Description of Work: Add/relocate 7 sprinklers
Z;p:80022 Combine 2 tenant control valves into 1.
' Contact Name: MiChael Krzastek
i ( ronal sheet if necessary)
Contact Phone: 303-288-3901 use addit.__�,... _.._._.. ., . . _... _. � ,.._._._ ._, ....._.. ___ __,.. --
i � __ _.__
� E-Mail mikek@allstatefireprotection.com j Detailed Location of Work: 5th Level (street) - east
1 Town of Vail Contractor Registration No.: 370-S ' end retail area.
/� %�ti/�./l %1./�'
' Contractor Signa re (required)
Property Information
P !#• 2101-071-22-001
i.,. . _ .. _.._ _ . . .... . . ....... . _ __. , ,..,...__._._.._,_, �, __
a Does a Monitored Fire Alarm Exist7 Yes (�) No O
; Does a Sprinkler System Exist? Yes (�) No O
Work Class:
arce . ' New ( ) Addition ( ) Remodel ( � ) Repair ( )
;(For parcel #, contad Eagle County Assessors Office at 970-328-8640 or
; visit www.eaglecounty.us/patie) I` Retfo-Fit O Othe� O
,� � __ __. ._.. .._� _. ..... . __...__.W.
._. �. _
; Tenant Name: Grab & Go Coffee j� Type of Building:
Owner Name:
Complete Valuation for Fire Sprinkler Permit: X�X' `M�
! Fire Sprinkler $: 3,000.00
� Single-Family ( ) Duplex ( ) Multi-Famity ( �)
�
! Commercial ( �) Restaurant ( ) Other ( )
Date Received: i ,1 � �� (� �l ��/] �
111 L!� J v
�ov 1 � zo»
��
TOWN OF VAIL
O1-Feb-10
co
800-381-9312
Technical Services +i-a0y-78�-8220
www.tyco-fire.com
Series RF/I — 5.6 K-factor
��Royal Flush /I" Concea/ed Pendent Sprinklers
Quick & Standard Response, Standard Coverage
General
Description
The TYCO Series RFII Quick Response
(3-mm bulb) and Standard Response
(5-mm bulb), 5.6 K-Factor, "Royal
Flush II" Concealed Pendent Sprin-
klers are decorative sprinklers featur-
ing a flat cover plate designed to con-
ceal the sprinkler. These sprinklers are
optimal for architecturally sensitive ar-
eas such as hotel lobbies, office build-
ings, churches, and restaurants.
Each sprinkler includes a Cover Plate/
Retainer Assembly and a Sprinkled
Support Cup Assembly. The separa-
ble, two-piece assembly design pro-
vides the following benefits:
• Allows installation of the sprinklers
and pressure testing of the fire pro-
tection system prior to installation of
a suspended ceiling or application of
the finish coating to a fixed ceiling.
• Permits the removal of suspended
ceiling panels for access to building
service equipment without having
to first shut down the fire protection
system and remove sprinklers.
• Provides for 1/2 inch (12,7 mm) of
vertical adjustment to allow a mea-
sure of flexibility in determining the
length of fixed piping to cut for the
sprinkler drops.
The Series RFII Sprinklers are shipped
with a Disposable Protective Cap. The
Protective Cap is temporarily removed
during installation and replaced to help
protect the sprinkler during ceiling in-
stallation or finish. The tip of the Pro-
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" ihat provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and in-
stallation can permanenily damage
a sprinkler system or its componenis
and cause the sprinkler to fail to
operate in a fire situation or cause it
to operate prematurely.
Page 1 of 6
tective Cap can be used to mark the
center of the ceiling hole into plaster
board or ceiling tiles by gently push-
ing the ceiling product against the Pro-
tective Cap. When ceiling installation
is complete, the Protective Cap is re-
moved and the Cover Plate/Retainer
Assembly is installed.
As an option, the Series RFII Standard
Response (5-mm bulb) "Royal Flush II"
Concealed Pendent Sprinklers can be
fitted with a silicone Air and Dust Seal.
(Refer to Figure 5.) The Air and Dust
Seal is intended for sensitive areas
where it is desirable to prevent air and
dust from the area above the ceiling to
pass through the cover plate.
�
The Series RFII Concealed Pendent
Sprinklers described herein must be
insialled and maintained in compli-
ance with this document and with the
applicable standards of the National
Fire Protection Association, in addi-
tion to the standards of any authori-
ties having jurisdiction. Failure to do so
may impair the performance of these
devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
SEPTEMBER 2011
:� � ..i
.�...
_. �r. . �
� _.. ..:�..- -.,.. _
� " �''^s"'_ 1
- „_
4 . ...: �,y.�"'�y� Y�l
�,,,,.'�"'.�.�..--...�,�..
Sprinkler
Identification
Number (SIN)
TY3531 — 3 mm bulb
TY3551 — 5 mm bulb
TFP181
TFP181
Page 2 of 6
Technical
Data
Sprinkler Approvals
Approvals apply only to the service
conditions indicated in the Design
Criteria section.
• TY3531 (3-mm Bulb) is UL Listed,
C-UL Listed, VdS Approved (Certif-
icate No. G4090007), and NYC Ap-
proved (MEA 353-01-E) as Quick
Response.
• TY3531 (3-mm Bulb) is FM and
LPCB Approved (Ref. No. 094a/10)
Approved as Standard Response.
Factory Mutual and LPCB do not
approve any concealed sprinklers
for quick response.
• TY3551 (5-mm Bulb) is UL Listed,
C-UL Listed, FM Approved, LPCB
Approved (Ref. No. 094a/9), and
NYC Approved (MEA 353-01-E) as
Standard Response.
Approvals for Air and Dust Seal
UL and C-UL Listed for use with the
RFII Standard Response Concealed
Sprinkler (TY3551).
Maximum Working Pressure
Maximum 250 psi (17,3 bar) by UL,
C-UL, and NYC
Maximum 175 psi (12,1 bar) by FM,
VdS, and LPCB
Temperature Rating
155°F (68°C) Sprinkler with
139°F (59°C) Plate
200°F (93°C) Sprinkler with
165°F (74°C) Plate
Discharge Coefficient
K= 5.6 GPM/psi'�2 (80,6 LPM/bar��2)
Adjustment
1/2 inch (12,7 mm)
Finishes
See the Ordering Procedure section.
Physical Characteristics
Frame . . . . . . . . . . . . . . . . . . . Bronze
Support Cup . . . . . . . . . . . . . .Chrome
Plated Steel
Guide Pins . . . . . . . . . Stainless Steel
Deflector ................. Bronze
Compression Screw. . . . . . . . . Brass
Bulb ......................Glass
Cap .............Bronze orCopper
Sealing Assembly. . . . . . . . .Beryllium
Nickel w/ TEFLON
Cover Plate . . . . . . . . . . . . . . . . Brass
Retainer .................. Brass
Ejection Spring. . . . . . Stainless Steel
1/2" NP7
FRAME
SUPPOR"
CUP WITt
ROLL FORN
THREAD;
GUIDE
PINS (2)
DEFLECTOR
THREADINTO
SUPPORT CUP
UNTIL MOUNTING
SURFACEIS
FLUSH WITH
CEILING
SOLDER
TABS (3)
EALING
SEMBLY
CAP
BULB
PRESSION
SCREW
=LECTOR
�OPPED
� � � i-� t'USITION)
;' J L
C_z r______z. r
SPRINKLER/SUPPORT CUP �
ASSEMBLY I
RETAINER
WITH THREAD
O � DIMPLES
COVER PLATE/RETAINER
ASSEMBLY
F/GURE 1
MODEL RFII CONCEALED SPRINKLER
ASSEMBLY
EJECTION
SPRING
COVER
PLATE
FACE OF
SPRINKLER
FITTING
SPRINKLER
SUPPORT CUP
ASSEMBLY
1/2" (12,7 mm)
THREADED
p ADJUSTMENT
FACE OF CEILING,
REfAINING RING
MOUNTING
SURFACE
CLEARANCE HOLE
- DIAMETER -
DIMENSION C
�� ��
�L ��
�-�_s _---- _r_�
-T--z
3/16" to 11/16" MANUFACTURER DEFLECTOR COVER PLATE
(4,8 to 17,5 mm) PRESET GAP IN DROPPED RETAINER
REFERENCE 3/32" (2,4 mm) POSITION ASSEMBLY
COVER PLATE
PROFILE DEPTH
DIMENSION B
A: 3-1/4 inches (82,6 mm)
B: 3/16 inches (4,8 mm)
COVER PLATE
DIAMEfER
DIMENSION A
C: 2-3/8 to 2-5/S inches (60,3 to 66,7 mm)
D: 1-3/4 to 2-1/4 inches (44,5 to 57,2 mm)
FIGURE 2
SERIES CONCEALED SPRlNKLER lNSTALLAT/ON D/MENSIONS
TFP181
Page 3 of 6
Design
Criteria
The TYCO Series RFII Concealed Pen-
dent Sprinklers are intended for fire
protection systems designed in ac-
cordance with the standard instal-
lation rules recognized by the appli-
cable Listing or Approval agency; for
example, UL Listing is based on NFPA
13 and VdS Approval is based on the
CEA 4001.
For more information on LPCB and
VdS Approvals, contact Tyco Fire Sup-
pression & Building Products at the
following office:
Enschede, Netherlands
Telephone:31-53-428-4444
Fax:31-53-428-3377
The Series RFII Concealed Pendent
Sprinklers are only listed and approved
with the Series RFII Concealed Cover
Plates having a factory applied finish.
�
Do not use the Series RFII in applica-
tions where the air pressure above
the ceiling is greater than that be-
low. Down drafts through the Sprin-
kler/Support Cup Assembly can delay
sprinkler operation in a fire situation.
Operation
When exposed to heat from a fire, the
Cover Plate, normally soldered to the
Retainer at three points, falls away to
expose the Sprinkler/Support Cup
Assembly.
The Deflector—supported by the
Guide Pins—then drops down to its
operational position.
The glass Bulb contains a fluid that ex-
pands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, activating the sprinkler and
allowing water to flow.
TFP181
Page6of6
Limited
Warranty
Products manufactured by Tyco Fire
Protection Products (TFPP) are war-
ranted solely to the original Buyer for
ten (10) years against defects in ma-
terial and workmanship when paid for
and properly installed and maintained
under normal use and service. This
warranty will expire ten (10) years from
date of shipment by TFPP. No warran-
ty is given for products or components
manufactured by companies not af-
filiated by ownership with TFPP or for
products and components which have
been subject to misuse, improper in-
stallation, corrosion, or which have not
been installed, maintained, modified or
repaired in accordance with applicable
Standards of the National Fire Protec-
tion Association, and/or the standards
of any other Authorities Having Juris-
diction. Materials found by TFPP to be
defective shall be either repaired or re-
placed, at TFPP's sole option. TFPP
neither assumes, nor authorizes any
person to assume for it, any other ob-
ligation in connection with the sale of
products or parts of products. TFPP
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer's representatives.
In no event shall TFPP be liable, in
contract, tort, strict liability or under
any other legal theory, for inciden-
tal, indirect, special or consequential
damages, including but not limited to
labor charges, regardless of whether
TFPP was informed about the possibil-
ity of such damages, and in no event
shall TFPP's liability exceed an amount
equal to the sales price.
The foregoing warranty is made in lieu
of any and all other warranties. ex-
press or implied. including warranties
of inerchantability and fitness for a
particular purpose.
This limited warranty sets forth the ex-
clusive remedy for claims based on
failure of or defect in products, materi-
als or components, whether the claim
is made in contract, tort, strict liability
or any other legal theory.
This warranty will apply to the full ex-
tent permitted by law. The invalidity,
in whole or part, of any portion of this
warranty will not affect the remainder.
Ordering
Procedure
Contact your local distributor for
availability. When placing an order,
indicate the full product name.
Sprinkler/Support Cup Assembly
Specify: (SIN), (temperature rating
from below) Series RFII Concealed
Pendent Sprinkler, P/N (specify).
155°F/68°C 200°F/93°C
TY3531 51-792-1-155 51-792-1-200
TY3551 51-790-1-155 51-790-1-200
Separately Ordered Cover Plate/
Retainer Assembly:
Specify: (temperature rating from be-
low) Series RFII Concealed Cover
Plate with (finish), P/N (specify).
139°F/59°C(a� 165°F/74°C(b)
Brass.......... 56-792-1-135 56-792-1-165
Chrome........56-792-9-135 56-792-9-165
Brushed
Chrome........56-792-8-135 56-792-8-165
Signal White
(RAL 9003). . . . 56-792-4-135 56-792-4-165
Grey White
(RAL 9002). . . . 56-792-0-135 56-792-0-165
Pure White (c)
(RAL 9010).... 56-792-3-135 56-792-3-165
Custom ........ 56-792-X-135 56-792-X-165
(a) Foruse with 155°F/68°C sprinklers.
(b) For use with 200°F/93°C sprinklers.
(c) Eastern Hemisphere sales only.
Sprinkler Wrench
Specify: RFII Sprinkler Wrench,
P/N 56-000-1-075.
Air and Dust Seal
Specify: Air and Dust Seal,
P/N 56-908-1-001.
Copyright OO 2008, 2011 Tyco Fire Protection Products. All rights reserved. tL�C�
TEFLON is trademark of The DuPont Corporation.
►nstallation
The TYCO Series RFII must be in-
stalled in accordance with the follow-
ing instructions.
�
Do not install any bulb-type sprinkler if
the bulb is cracked or there is a loss
of liquid from the bulb. With the sprin-
kler held horizontally, a small air bub-
ble should be present. The diameter
of the air bubble is approximately 1/16
inch (1,6 mm) for the 155°F/68°C and
3/32 inch (2,4 mm) for the 200°F/93°C
temperature ratings.
Obtain a 1/2 inch NPT sprinkler joint
by applying a minimum to maximum
torque of 7 to 14 ft.-Ibs. (9,5 to 19,0
Nm). Higher levels of torque can dis-
tort the sprinkler Inlet with consequent
leakage or impairment of the sprinkler.
Do not attempt to compensate for in-
sufficient adjustment in the Sprink/er
by under- or over-tightening the Sprin-
klerlSupport Cup Assembly. Re-adjust
the position of the sprinkler fitting to
suit.
Step 1. Install the sprinkler only in the
pendent position with the center-line
of the sprinkler perpendicular to the
mounting surface.
Step 2. Remove the Protective Cap.
Step 3. With pipe thread sealant ap-
plied to the pipe threads, hand-tighten
the sprinkler into the sprinkler fitting.
Step 4. Wrench-tighten the sprinkler
using only the RFII Sprinkler Wrench.
(Refer to Figure 3.) Apply the RFII
Sprinkler Wrench to the Sprinkler as
shown in Figure 3.
Step 5. Replace the Protective Cap
by pushing it upwards until it bottoms
out against the Support Cup. (Refer
to Figure 4.) The Protective Cap helps
prevent damage to the Deflector and
Arms during ceiling installation and/or
finish. You can also use the Protective
Cap to locate the center of the clear-
ance hole by gently pushing the ceiling
material up against the center point of
the Protective Cap.
�
As long as the Protective Cap remains
in place, the system is considered
"Out of Service".
Step 6. After the ceiling has been com-
pleted with the 2-1/2 inch (63,5 mm) di-
ameter clearance hole and in prepa-
ration for installing the Cover Plate/
Retainer Assembly, remove and dis-
card the Protective Cap. Verify that the
Deflector moves up and down freely.
If the Sprinkler is damaged and the
Deflector does not move up and down
freely, replace the entire Sprinkler.
Do not attempt to modify or repair a
damaged sprinkler.
Step 7. When installing an Air and Dust
Seal, refer to Figure 5; otherwise, pro-
ceed to Step 8. To attach the Air and
Dust Seal, verify the angle of the out-
side edge of the seal is oriented ac-
cording to Figure 5. Start the edge of
the Retainer in the grooved slot of the
Air and Dust Seal and continue around
the retainer until the entire Air and Dust
Seal is engaged.
Step 8. Screw on the Cover Plate/
Retainer Assembly until the Retainer
(shown in Figure 2) or the Air and Dust
Seal (shown in Figure 5) contacts the
ceiling. Do not continue to screw on
the Cover Plate/Retainer Assembly
so that it lifts a ceiling panel out of its
normal position. If you cannot engage
the Cover Plate/Retainer Assembly
with the Support Cup or you cannot
engage the Cover Plate/Retainer As-
sembly sufficiently to contact the ceil-
ing, you must reposition the Sprinkler
Fitting.
Care and
Maintenance
The TYCO Series RFII must be
maintained and serviced in accordance
with the following instructions.
�
Before closing a fire protection sys-
tem main control valve for maintenance
work on the fire protection system that
it controls, obtain permission to shut
down the affected fire protection sys-
tem from the proper authorities and no-
tify all personnel who may be affected
by this action.
TFP181
Page 5 of 6
Absence of the Cover Plate/Retainer
Assembly can delay sprinkler opera-
tion in a fire situation.
When properly installed, there is a
nominal 3/32 inch (2,4 mm) air gap be-
tween the lip of the Cover Plate and the
ceiling, as shown in Figure 2.
This air gap is necessary for proper
operation of the sprinkler. If the ceil-
ing requires repainting after sprinkler
installation, ensure that the new paint
does not seal off any of the air gap.
Do not pull the Cover Plate relative to
the Enclosure. Separation may result.
Replace sprinklers that:
• are leaking or exhibiting visible signs
of corrosion.
• were modified or over-heated.
Never paint, plate, coat, or otherwise
alter automatic sprinklers after they
leave the factory. Never repaint facto-
ry-painted Cover Plates. If necessary,
replace them with factory-painted
units. Non-factory applied paint can
adversely delay or prevent sprinkler
operation in the event of a fire.
Exercise care to avoid damage to
sprinklers before, during, and after in-
stallation. Replace sprinklers damaged
by dropping, striking, wrench twisting,
wrench slipping, or the like. Also, re-
place any sprinkler that has a cracked
bulb or that has lost liquid from its
bulb. (Refer to the Installation section.)
If you must remove a sprinkler, do not
reinstall it or a replacement without re-
installing the Cover Plate/Retainer As-
sembly. If a Cover Plate/Retainer As-
sembly becomes dislodged during
service, replace it immediately.
Responsibility lies with sprinkler own-
ers for the inspection, testing, and
maintenance of their fire protection
system and devices in compliance
with this document, as well as with the
applicable standards of the National
Fire Protection Association (for exam-
ple, NFPA 25), in addition to the stan-
dards of any other authorities having
jurisdiction. Contact the installing con-
tractor or sprinkler manufacturer re-
garding any questions.
Automatic sprinkler systems should be
inspected, tested, and maintained by a
qualified Inspection Service in accor-
dance with local requirements and/or
national code.
TFP181
Page 4 of 6
FRAME
ARM
�UPPOR�
CUP
7/8" (23 mr
SQUARE
ALIGN
ARROWS WITF
FRAMEARMS
ACCEPTS
1/2" SOCKET
DRIVE
FIGURE 3
RF/l SPRINKLER WRENCH
SUPPORT SPRINKLER FACE OF
CUP _ / CEILWG
COVER
PLATE
REfAINER
ASSEMBLY
ORIENT
� SEAL
BEVEL AS
SHOWN
� \ AIR
AND DUST
LIP OF COVER SEAL
REfAINER PLATE
FIGURE 5
OPT/ONAL A/R AND DUST SEAL FOR SERIES RFI! (TY3551)
CLEARANCE �
HOLE
FIGURE 4
DISPOSABLE PROTECTlVE CAP