HomeMy WebLinkAboutDRB120449
Project Name:TONKIN WINDOW REPLACMENTS DRB Number: DRB120449
Project Description:
NEW WINDOWS AND SLIDIGN DOOR IN EXISTING OPENINGS. SAME COLOR GOING FROM
WOOD TO VINYL.
Participants:
OWNER TONKIN, ADAM D. & ALYSON L. 09/18/2012
1920 GILPIN ST
DENVER
CO 80210
APPLICANT TONKIN, ADAM D. & ALYSON L. 09/18/2012
1920 GILPIN ST
DENVER
CO 80210
Project Address:1880 MEADOW RIDGE RD VAILLocation:
MEADOW CREEK CONDOS UNIT A10
Legal Description:Lot: Block: Subdivision: BUFFER CREEK CONDO
Parcel Number:2103-123-0102-0
Comments:See conditions
BOARD/STAFF ACTION
Motion By: Action: STAFFAPP
Second By:
Vote: Date of Approval: 09/20/2012
Conditions:
Cond: 8
(PLAN): No changes to these plans may be made without the written consent of Town of
Vail staff and/or the appropriate review committee(s).
Cond: 0
(PLAN): DRB approval does not constitute a permit for building. Please consult with
Town of Vail Building personnel prior to construction activities.
Cond: 201
(PLAN): DRB approval shall not become valid for 20 days following the date of
approval, pursuant to the Vail Town Code, Chapter 12-3-3: APPEALS.
Cond: 202
(PLAN): Approval of this project shall lapse and become void one (1) year following
the date of final approval, unless a building permit is issued and construction is
commenced and is diligently pursued toward completion.
Planner:Warren Campbell DRB Fee Paid: $250.00
f
TOWN OF VAIL
SEP 14 2012
TOWN OF VAIL
Department of Community Development
75 South Frontage Road
Vail, CO 81657
Tel: 970 -479 -2128
www.vailgov.com
Development Review Coordinator
Application for Design Review
Minor Exterior Alteration
General Information: This application is required for all proposals involving minor changes to buildings and site improve-
ments, such as roofing, painting, window additions, landscaping, fences, retaining walls, etc. Applicable Vail Town
Code sections can be found at v_Y"ww.vaiigov.coni under Vail Information – Town Code Online. All projects requiring de-
sign review must receive approval prior to submitting a building permit application. An application for Design Review
cannot be accepted until all required information is received by the Community Development Department, as outlined in
the submittal requirements. The project may also need to be reviewed by the Town Council and/or the Planning and
Environmental Commission. Design review approval expires one year from the date of approval, unless a building per-
mit is issued and construction commences.
Fee: $250 for Multi - Family /Commercial
$20 for Single Family /Duplex
_ Single Family Duplex ✓ Multi - Family
Description of the Request: Replace windows, same as originals. No resizing of openings.
Commercial
Physical Address: 1860 Meadow Ridge Rd. #A10 Vail, CO 81657
Parcel Number: 2103 - 123- 01 -'NQ 0,20 (Contact Eagle Co. Assessor at 970 - 328 -8640 for parcel no.)
Property Owner: Adam Tonkin
Mailing Address: 1860 Meadow Ridge Rd #A10 Vail CO 81657
Phone: 303 -408 -6010
Owner's Signature: �`c-- —
Primary Contact/ Owner Representative: Erin Fowler / Jules Landis
Mailing Address: 3250 Quentin St #128 Aurora, CO 80011
E -Mail: erin_fowler @homedepot.com
Phone: 303 - 209 -8650 Jules cell: 720- 496 -7322
Fax: 303- 360 -1066
For Office Use Only:
Cash CC: Visa / MC Last 4 CC # _ Exp. Date: Auth # Check #I y 9 .�
I Fee Paid: O ��2_ Received From: Co L-0 RADo t69mt'[ Svcs LL
Meeting Date: ___ DRB No.: ?-p
Planner: Project No:
Zoning: Land Use:
Location of the Proposal: Lot: Block: Subdivision: J�LLF!` EH2 CaC69
TOWN OF VAIL/
JOINT PROPERTY OWNER
WRITTEN APPROVAL LETTER
The applicant must submit written joint property owner approval for applications affecting shared ownership properties
such as duplex, condominium, and multi- tenant buildings. This form, or similar written correspondence, must be com-
pleted by the adjoining duplex unit owner or the authorized agent of the home owner's association in the case of a con-
dominium or multi- tenant building. All completed forms must be submitted with the applicants completed application.
I, (print name) Chris Wombolt, Treasurer Buffer Creek Condo Assoc. , a joint owner, or authority of the association,
of property located at Buffer Creek Condos, 1860 Meadow Ridge Road, Vail, CO 81657 , provide this letter as written
approval of the plans dated 03 July 2012
which have been submitted to the
Town of Vail Community Development Department for the proposed improvements to be completed at the address not-
ed above. I understand that the proposed improvements include:
Simonton 6500 replacement Windows & Patio door with chocolate brown exteriors.
Only the chocolate exterior colored units can be installed.
Any new wood or flashing used by the installer will need to match the exterior of the building exactly.
c
top her.
bolt @ppd.com 09Sep2012
wom
{
(Signature) (Date)
Additionally, please check the statement below which is most applicable to you:
I understand that minor modifications may be made to the plans over the course of the review process to ensure compli-
ance with the Town's applicable codes and regulations.
CW
(Initial here)
I understand that all modifications, minor or otherwise, which are made to the plans over the course of the review pro-
cess, be brought to my attention by the applicant for additional approval before undergoing further review by the Town.
CW
(Initial here)
Property Information
Property Address
1860 Meadow Ridge Rd #A10 Vail, CO 81657
Parcel #
2103 - 123 -01 -20
Allowed
Legal Description
DESC: BLDG A Subdivision BUFFER CREEK CONDO Unit: 10
Development Site Area
sq ft
NA
acres
Secondary sq ft
buildable sq
ft
Zone District / SDD #
NA
Hazard Zones
Sections 12 -21 & 14 -7
Snow Avalanche
TOTAL sq ft
r High Severity []Moderate Severity N/A
Debris Flow
NA
r High Flow []Moderate Flow High Avalanche N/A
Rock fall
Setbacks (minimum)
Section 14 -10 -4
F_ High Severity (Medium Severity N/A
Excessive Slopes
230% N/A
Floodplain
❑100 year floodplain Floodway 7 Wetlands N/A
Creeks, Streams
Section 12 -14 -17
Gore Creek
Other tributary:
on site _ adjacent to site i° N/A
Fon site F adjacent to site j✓ N/A
Project Information
Project Description
Replace (5) Windows, same as originals, no resizing of openings.
Development Standards
Allowed
Existing
Proposed
Gross Residential Floor Area
(maximum)
Chapter 12 -15
Primary sq ft
NA
Secondary sq ft
NA
EHU sq ft
NA
TOTAL sq ft
NA
F250 Addition Interior Conversion
Credits:
Setbacks (minimum)
Section 14 -10 -4
Front ft
NA
Side ft
NA
Side ft
NA
Rear ft
NA
Watercourse ft
NA
Site Coverage (maximum)
see definition Section 12 -2 -2
NA
Building Height (maximum)
see definition Section 12 -2 -2
Sloping ft
Flat ft
NA
Landscaping
See definition Section 14 -2 -1
Section 14 -10 -8
Softscape sq ft
NA
Hardscape sq ft
NA
TOTAL sq ft
NA
Driveway
Sections 14 -3 -1 & 14 -3 -2
Max Curb -cuts
NA
Max Grade @ cen
terline
NA
Min Width
NA
Heated drive?
G Yes []No
F— Yes [. - -No
Snow Storage %
NA
Parking
Sections 12 -10 & 14 -5
#Enclosed Spaces
#Unenclosed
TOTAL
NA
Outdoor Lighting (maximum)
Section 14 -10 -7
# fixtures
rowN of va, ILJ
Pre - application Meeting
DESIGN REVIEW PROCESS
A pre - application meeting with Town of Vail Staff is not required; however, highly recommended. The purpose of a pre -
application meeting is to identify any critical issues pertaining to the proposal and to determine the appropriate development
review process for an application. Town of Vail Planning Staff reserves Thursday afternoons for pre - application meetings.
Please call the Development Review Coordinator at 970 - 479 -2128 to schedule a meeting for Thursday afternoon.
Deadlines and Meeting Dates
The Design Review Board meets on the 1 st and 3rd Wednesdays of each month beginning at 3:00 pm. Complete applica-
tions are due in the Office of Community Development no later than 12:00 noon on the submittal deadlines below:
Submittal Deadline
Meeting Date
December 12, 2011
January 4, 2012
Continued, , ,
Continued, , ,
December 26, 2011
January 18, 2012
Submittal Deadline
Meeting Date
January 9, 2012
February 1, 2012
July 9, 2012
August 1, 2012
January 23, 2012
February 15, 2012
July 23, 2012
August 15, 2012
February 13, 2012
March 7, 2012
August 13, 2012
September 5, 2012
February 27, 2012
March 21, 2012
August 27, 2012
September 19, 2012
March 12, 2012
April 4, 2012
September 10, 2012
October 3, 2012
March 26, 2012
April 18, 2012
September 24, 2012
October 17, 2012
April 9, 2012
May 2, 2012
October 15, 2012
November 7, 2012
April 23, 2012
May 16, 2012
October 29, 2012
November 21, 2012
May 14, 2012
June 6, 2012
November 12, 2012
December 5, 2012
May 29, 2012
June 20, 2012
November 26, 2012
December 19, 2012
June 11, 2012
July 4, 2012
December 10, 2012
January 2, 2013
June 25 2012
July 18, 2012
December 24 2012
January 16 2013
Application Submittal
Submit all required information under the submittal requirements section of this application by the deadlines stated above.
Incomplete applications will not be processed. Upon receipt of a complete application, the Community Development De-
partment shall review the submitted materials for general compliance with the appropriate requirements of the zoning code.
If the application is not in compliance with zoning code requirements, the application and submittal materials shall be re-
turned to the applicant with a written explanation of non - compliance.
Staff Review
The Administrator (a member of the Planning Staff) will review and either approve a Design Review application, approve it
with conditions, deny the application, or refer the application to the Design Review Board for a decision. All Staff approvals
are reviewed by the Design Review Board and any administrative decision is subject to final approval by the Board. The
Board reviews applications and may approve, approve with conditions, deny the application, or table the application to allow
applicants to respond to comments.
Design Review Board Meeting Requirements
Prior to the meeting, for new construction and additions, the applicant must stake and tape the project site to indicate prop-
erty lines, proposed buildings and building corners. All trees proposed to be removed must be marked. The applicant must
ensure that staking done during the winter is not buried by snow.
The applicant, or their representative(s), shall be present at the Design Review Board public meeting. The item will be
postponed if the applicant fails to appear before the Design Review Board, on their scheduled meeting date.
SUBMITTAL REQUIREMENTS
The Town of Vail offers two (2) methods for submittal of materials for review of applications. Materials can be submitted either digitally
or on paper. Whichever method you select all materials shall be submitted in that format throughout the Design Review process. The
Town encourages you to consider using the submittal of digital documents and plans.
If submitting digitally all elements of the application shall be uploaded to the Town's share file site as a complete set of materials. If
submitting paper three (3) copies of the materials noted with an asterisk (') and one (1) copy of all others are required. The materials
necessary to have a complete application are as follows:
❑ Completed application form including owner's signature (cover sheet).
Ei Application fee
• Additional fees may be required if: 1) Any local, state or Federal agency review is required, 2) Publishing
fees are in excess of 50% of the application fee, or 3) External consultants are required by the Town to re-
view significant impacts on the community.
❑ Project narrative describing the background, purpose and details of the proposal (Address To: Design Review Board).
❑ Title report, including Schedules A & B to verify ownership and easements.
❑ Joint Property Owner Written Approval Letter, if applicable (pg. 2). This form is applicable to all Design Review appli-
cants that share ownership of the subject property. For example, the subject property where construction is occurring
is a duplex, condominium or multi- tenant building. This form shall be completed by the applicant's neighbor/ joint
property owner. In the case of a multiple - family dwelling or multi- tenant building, the authority of the association shall
complete this form.
❑ Utility Approval and Verification Form, if applicable (pg. 7). This form is applicable to any construction within an ease-
ment and may be required for any construction if deemed necessary by Town of Vail Staff.
❑ Plan Sheet Format (Applies to all plan sheets)
❑ Plan sheet size must be 24 "x 36 ". For large projects, larger plan size may be allowed.
• Graphic bar scale (minimum scale is 1 " =20').
• North arrow.
• Title block, project name, project address and legal description.
• Indication of plan preparer, address and phone number.
• Dates of original plan preparation and all revision dates.
• Sheet labels and numbers.
• A border with a minimum left side margin of 1.5 ".
• Plan legend.
o Plan Set Cover Sheet'
• Project name.
• Address and legal description.
• Sheet Index.
• Preparer's contact information and other relevant contacts (i.e. Owner, Surveyor, Contractor).
• Vicinity map or location map at a scale of 1 "= 1,000' or larger.
❑ Stamped Topographic Survey'
• Wet stamp and signature of a licensed surveyor.
• Scale of 1"=10' or 1"=20'.
• Legal description and physical address.
• Lot size and build able area (excludes red hazard avalanche, slopes greater than 40 %, and floodplain).
• Labeled ties to existing benchmark, either USGS landmark or sewer invert.
• Property boundaries to the nearest hundredth (.01) of a foot accuracy. Distances and bearings and a basis of
bearing must be shown. Show existing pins or monuments found and their relationship to the established
corner.
• Show right of way and property lines; including bearings, distances and curve information.
• Indicate all easements identified on the subdivision plat and recorded against the property as indicated in the
title report. List any easement restrictions.
• Spot Elevations at the edge of asphalt, along the street frontage of the property at twenty -five foot intervals
(25'), and a minimum of one spot elevations on either side of the lot.
• Topographic conditions at two foot contour intervals.
• Existing trees or groups of trees having trunks with diameters of 4" or more.
• Rock outcroppings and other significant natural features (large boulders, intermittent streams, etc.).
• All existing improvements (including foundation walls, roof overhangs, building overhangs, etc.).
• Environmental Hazards (i.e. rock fall, debris flow, avalanche, wetlands, floodplain, soils).
• Wetland delineation and provide any necessary approvals or permits from Colorado Department of Natural
Resources and/ or Army Corp of Engineers.
• Watercourse setbacks, if applicable (show centerline and edge of stream or creek in addition to the required
stream or creak setback).
• Show all utility meter locations, including any pedestals on site or in the right -of -way adjacent to the site. Ex-
act location of existing utility sources and proposed service lines from their source to the structure. Utilities to
include, cable TV, sewer, gas, telephone, water, electric, size and type of drainage culverts, swales, etc.
• Adjacent roadways labeled and edge of asphalt for both sides of the roadway shown for a minimum of 250' in
either direction from property.
• Any adjacent sidewalks and trails.
❑ Site and Grading Plan'
• Scale of 1 " =20' or 1 " =10' (The site and grading plan must be drawn at the same scale as the topographic sur-
vey).
• Lot size and buildable area (excludes red hazard avalanche, slopes greater than 40 %, and floodplain).
• Property and setback lines.
• Existing and proposed easements.
• Existing and proposed grades. All disturbed areas must be returned to a 2:1 grade or PE stamped details of
slope protection and /or stable soils are required.
• Existing and proposed layout of buildings and other structures including decks, patios, fences and walls. Indi-
cate the foundation with a dashed line and the roof edge with a solid line.
• All proposed roof ridge lines with proposed ridge elevations. Indicate existing (natural grade prior to construc-
tion of structure) and proposed grades shown underneath all roof lines. This will be used to calculate building
height.
• Proposed driveways: Site plan must show driveway type, finished surface, heated or unheated, grade, per-
cent slope, dimensions, turning radii, site distance, required parking spaces with 9' x 19' surface parking
spaces and 9' x 18' enclosed spaces, and spot elevations at the property line, garage slab and as necessary
along the centerline of the driveway to accurately reflect grade.
• A 4' wide unheated concrete pan at the edge of driveway.
• Locations of all utilities including meter pits, existing sources and proposed service lines from sources to the
structures.
• Proposed surface drainage on and off -site, including culverts.
• Location of landscaped areas.
• Location of limits of disturbance fencing.
• Names of all adjacent roadways.
• Snow storage must be shown within property boundaries adjacent to driveway (30% of driveway area if un-
heated, 10% of driveway area if heated).
• Proposed dumpster location and detail of dumpster enclosure.
• Retaining walls with proposed elevations at top and bottom of walls. A detailed cross - section and elevation
drawings shall be provided on the plan or separate sheet. Stamped engineering drawings are required for
walls between 4' and 6' feet in height and all combination walls.
• If less than one half acre is to be disturbed, proper erosion control devices need to be shown on the site plan.
If more than one half acre is to be disturbed, then a separate professionally engineered and PE stamped Ero-
sion Control Plan must be submitted.
• 100 -year floodplain.
• Location of all geologic /environmental hazard areas.
• Delineate areas to be phased and appropriate timing, if applicable.
❑ Landscape Plan"
• Scale of 1" = 20' or 1" = 10'
• Landscape plan must be drawn at the same scale as the site plan.
• Location of existing trees, 4" diameter or larger. Indicate trees to remain, to be relocated (including new loca-
tion), and to be removed. Large stands of trees may be shown (as bubble) if the strand is not being affected
by the proposed improvements and grading.
• Indicate all existing ground cover and shrubs.
• Detailed legend, listing the type and size (caliper for deciduous trees, height for conifers, gallon size for
shrubs and height for foundation shrubs) of all the existing and proposed plant material including ground cov-
er.
• Delineate critical root zones for existing trees in close proximity to site grading and construction.
• Indicate the location of all proposed plantings.
• The location and type of existing and proposed watering systems.
• Existing and proposed contour lines. Retaining walls shall be included with the top of wall and the bottom of
wall elevations noted.
• Landscaping summary, including the botanical and common names, size and quantity of trees to be removed
and proposed trees. The minimum size for proposed trees is 2" caliper deciduous trees, coniferous trees that
are six feet in height, and 5 gallon shrubs. Also specify types of groundcover and proposed square footage.
Include a description of any other landscaping features (ponds, fountains, retaining walls, pools, etc).
Architectural Elevations'
• Scale of 1/8" = 1' or larger; 1/4" = 1' is preferred.
• All elevations, existing and proposed, of the proposed development shall be drawn to scale and fully dimen-
sioned. The elevation drawings must show both existing and finished grades. Floor plans and building eleva-
tions must be drawn at the same scale.
• Show all building faces including angles not represented well on the normal building elevations.
• Elevations shall show proposed finished elevation of floors and roofs on all levels.
• All exterior materials and colors shall be specified on the elevations.
• The following shall be shown graphically and fully dimensioned: fascia, trim, railings, chimney caps, meter
locations, meter screening methods and window details.
• Show all proposed exterior lighting fixtures on the building.
• Illustrate all decks, porches and balconies.
• Indicate the roof and building drainage system (i.e. gutters and downspouts).
• Indicate all rooftop mechanical systems and all other roof structures, if applicable.
• Illustrate proposed building height elevation on roof lines and ridges. These elevations should coordinate
with the finished floor elevations and the datum used for the survey.
• Exterior color and material samples shall be submitted to staff and presented at the Design Review Board
meeting.
Architectural Floor Plans"
• Scale of 1/8" = 1' or larger; 1/4" = 1' is preferred.
• All floor plans, existing and proposed, of the proposed development shall be drawn to scale and fully dimen-
sioned.
• Floor plans and building elevations must be drawn at the same scale.
• Clearly indicate the inside face and outside face, of the sheathing, of the exterior structural walls of the build-
ing.
• Label floor plans to indicate the proposed floor area use (i.e. bedroom, kitchen, etc.).
• One set of floor plans must be "red- lined" indicating how the gross residential floor area (GRFA) was calculat-
ed. See Title 12, Chapter 15 — Gross Residential Floor Area for regulations.
• Provide dimensions of all roof eaves and overhangs.
❑ Lighting Plan'
• Indicate type, location and number of fixtures.
• Include height above grade,
• Cut sheet(s) for proposed fixtures demonstrating compliance with 14 -10 -7, Outdoor Lighting, Vail Town Code.
❑ Gross Residential Floor Area calculations (including allowable, existing, proposed, and total GRFA for all units in the
development plan, including the other half of a duplex).
❑ Site Development Standards calculations (existing and proposed): landscape area (show softscape & hardscape),
site coverage, building height, number of dwelling units and employee housing units, setbacks, number of enclosed
and unenclosed parking spaces, driveway area, snow storage area etc.
❑ One set of consolidated overlapped floor plans must visually demonstrate how site coverage was calculated. See
Section 12 -2 -2, Definitions, Vail Town Code, for those elements which are considered site coverage.
❑ Exterior building materials list (also to be included on elevations and in materials samples), including location, type of
material, and color. Please specify the manufacturer's name, the color name and number.
❑ Exterior color and material samples and specifications. A physical material samples and specifications board will
need to be provided in conjunction with a digital submittal.
❑ Photos of the existing site and adjacent structures, where applicable.
• Site - specific Geological Hazard Report, if applicable - If a property is located in or adjacent to a mapped hazard area
(i.e. snow avalanche, rockfall, debris flow, floodplain, wetland, poor soils, etc.), the Community Development Depart-
ment may require a site - specific geological investigation.
• The Administrator and /or DRB may require the submission of additional plans, drawings, specifications, samples and
other materials (including a model) if deemed necessary to determine whether a project will comply with Design
Guidelines or if the intent of the proposal is not clearly indicated.
PROPOSED MATERIALS
Building Materials Type of Material Color
Roof
Siding
Other Wall Materials
Fascia
Soffits
VINYL - Simonton 6500 Series Chocolate
Windows
Window Trim
Doors
Door Trim
Hand or Deck Rails
Flues
Flashing
Chimneys
Trash Enclosures
Greenhouses
Retaining Walls
Exterior Lighting
Other
Notes:
Please specify the manufacturer's name, the color name and number and attach a color chip.
PROPOSED LANDSCAPING
Botanical Name Common Name Quantity Size
AND SHRUBS
EXISTING TREES
TO BE REMOVED
Minimum Requirements for Landscaping: Deciduous Trees — 2" Caliper
Coniferous Trees — 6' in height
Shrubs — 5 Gal.
Type Square Footage
GROUND COVER
SOD
SEED
IRRIGATION
TYPE OF EROSION CONTROL
Please specify other landscape features (i.e. retaining walls, fences, swimming pools, etc.)
UTILITY APPROVAL & VERIFICATION
This form serves to verify that the proposed improvements will not impact any existing or proposed utility services, and also to verify
service availability and location for new construction and should be used in conjunction with preparing your utility plan and schedul-
ing installations. A site plan, including grading plan, floor plan, and elevations, shall be submitted to the following utilities for approval
and verification. PLEASE ALLOW UP TO 2 WEEKS FOR APPROVAL OR COMMENTS FROM THE UTILITY COMPANIES. If you
are unable to obtain comments within that timeframe please contact The Town of Vail.
Subject Property Address:
Primary Contact / Owner Representative:
Primary Contact/Owner Representative Signature
Lot Block Subdivision: _
Phone: 303 - 408 -6010
Plans Dated:
NOTES:
1. Utility locations must be obtained before digging.
2. A Revocable Right -of -Way Permit may be required for any improvements within a street right -of -way. Contact the
Public Works Department for verification 970.479.2198.
3. It is the responsibility of the utility company and the applicant to resolve problems identified above.
4. The Primary Contact /Owner Representative is required to submit any revised drawings to the above agencies for
re- approval & re- verification if the submitted plans are altered in any way after the authorized signature date.
Authorized Signature
Comments
Date
CENTURY TEL
970.468.6860(tel)
970.468.0672(fax)
Contacts: Samuel Tooley
sa muel.tooleyCcbcenturyli nk.com
XCEL HIGH PRESSURE GAS
970.406.1309 (tel)
970.468.1401 (fax)
Contact: Ron Bureta
ronnie.j. bureta@xcelenergy.com
HOLY CROSS ENERGY
970.947.5471 (tel)
970.945.4081 (fax)
Contact: Jeff Vroom
jvroom @holycross.com
XCEL Energy
970.262.4038 (fax)
970.262.4050 (tel)
Contacts: Louise Timson
Iouise.timson@xcelenergy.com
EAGLE RIVER WATER & SANITA-
TION DISTRICT
970.477.5435 (tel)
970.477.5434 (fax)
Contact: Tug Birk
tbirkOderwsci.org
COMCAST CABLE
970,390.4713 (tel)
970.468.2672 (fax)
Contact: Michael Johnson
Michael-johnson@cable.comcast.com
CDOT (Only in CDOT Right -of -way)
970.683.6284 (tel)
Contact: Dan Roussin
Daniel.roussin@dot.state.co.us
NOTES:
1. Utility locations must be obtained before digging.
2. A Revocable Right -of -Way Permit may be required for any improvements within a street right -of -way. Contact the
Public Works Department for verification 970.479.2198.
3. It is the responsibility of the utility company and the applicant to resolve problems identified above.
4. The Primary Contact /Owner Representative is required to submit any revised drawings to the above agencies for
re- approval & re- verification if the submitted plans are altered in any way after the authorized signature date.
"Highest in Customer Satisfaction r hree Years in a Row. LEARN MORE
-��� `~
wd M e stylizes 'S' a r e r c t g s " e r e d zraaerrao" "" - - ` i rl(l()ws I I I
k nl Sanonkm Eulldmy F.oduds, Inc
Available Exi
3s. Inc:.
%VantagePointe
WUWindu%vs and Doors By tv it
Available Exciusneiy I rm*
Why VantagePointe?
VantagePointe" Windows and Doors by Simonton' are available
exclusively through The Home Depot`- and feature award - winning
quality construction beauty, style, options, value. and energy
efficiency
The Home Depot has been helping you build your dreams for over
25 years- Take the risks and hassles out of your next window and
door remodeling project with The Home Depot's professionally trained
employees and authorized service providers VantagePointe Windows
and Doors combine the best from two of America's leading
companies— Simonton Windows and The Home Depot
Beautify your home and simplify your life with VantagePointe
Windows and Doors by Simonton,. available exclusively through The
Home Depot.
Learn more about the many styles, features, colors options. and
products available with VantagePointe
Simonton Windows °'ranks "Highest in Customer Satisfaction
-Mth Windows and Doors,Three Years in a Row' LEARN LAORE
8/31/2012 1:59:18 PM
Measure FI: Gregory Long
Consultant 1:Gil Folsom
Consultant 2:
SALES ORDER SUMMARY
The Home Depot At Home
Homeowner: Mr. Adam Tonkin
Sale Date: 8/16/2012
Job No: 6430057 Product: Windows
Sale Amount: $9,822.00
Branch: Denver Status:
Sale/Released to Production
Ship To:
Line/Rm /Flr Style
Series Color Option
Width Height
1 Living 1 Patio Doors (PD)
6500 White
95.25 79.25
Room
2 Kitchen 1 Single Casement / Operating
6500 White
25.00 42.00
3 Bathroom 1Double Hung (DH)
6500 White
26.00 35.00
Tempered Glass/Not Garden(Full)
4 Bedroom 1 Dual Casement (C -2)
6500 White
50.00 45.00
5 Bedroom 3 Panel Slider 1/3- 1/3 -1/3
6500 White
75.00 53.00
6 Loft 1 Single Casement / Operating
6500 White
30.00 36.00
8/31/2012 1:59:18 PM
Measure FI: Gregory Long
Consultant 1:Gil Folsom
Consultant 2: