HomeMy WebLinkAboutB13-0001K�
TOWN OF VA
Project Street Address:
Department of Community Development
75 South Frontage Road
Vail, CO 81657
Tel: 970 - 479 -2128
www.vailgov.com
Development Review Coordinator
BUILDING PERMIT APPLICATION
(Separate applications are required for alarm & sprinkler)
(Number) (Street) (Suite #)
Building /Complex Name: % iy.3utlllLj
Contractor Information
Business Name: �i/1.t� GQ�✓li/�sa/ ; /�ira.�.i+�
Business Address: a� Sa�C 2 k Z
city �GGaPa2p ! State: f Zip: a4 �G
Contact Name:
Contact Phone: Pf4 tea?, –S�yl
Gt.
Contact E -Mail: —dgw AbL.
T
I hereby acknowledge that I have read this application, filled out
in full the information required, completed an accurate plot plan,
and state that all the information as required is correct. I agree to
comply with the information and plot plan, to comply with all Town
ordinances and state laws, and to build this structure according to
the town's zoning and subdivision codes, design review ap-
proved, International Building and Residential Codes and other
ordinances of the Town applicable thereto.
X�c�
Owner /Owner's Representative Signature (Required)
Applicant Information
Applicant Name: ��k .c
/ g �o
Applicant Phone: 4;�y_
ApplicantE -Mail: /�iavi���•✓ %iCa✓ /�L• GOM
Project Information
Owner Name: ,�'��,i �fGiliv c.
Parcel #: i2w !22 D 1 D D 7
(For Parcel #, contact Eagle County Assessors Office at (970- 328 -8640 or visit
www.eagl ecounty. us/patie)
For Office Use Only: 4
Fee Paid: !�
Received From: f%k ,_( -y`0-
Cash Check #
CC: VisLIC Last 4 CC # exp date:
Auth #
Project #: R S o
DRB #: DTC_
Building Permit #: _R03 – boo I
Lot #: Block # Subdivision: Ut9PC.f4Tre0
Work Class: New ( ) Addition ( ) Alteration(
Type of Building:
Single - Family ( ) Duplex( ) Multi - Family
Commercial ( ) Other
Work Type: Interior ( ) Exterior ( ) Both
Valuation of
Work Included Plans Included Work
Electrical ( )Yes ( )No ( )Yes ( )No
Mechanical ( )Yes ( )No ( )Yes ( )No
Plumbing ( )Yes ( )No ( )Yes ( )No
Building ( .)Yes ( )No ( oyfies ( )No / 7000
a�
Value of all work being performed: $ Z Z,00,0
(value based on IBC Section 109.3 & IRC Section 108.3)
Electrical Square Footage
Detailed Scope and Location of Work:
(use additional sheet if
Date Received:
JAN u 2 2013
TOWN OF VAIL
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
TOWN OF VAIL, COLORADO Statement
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
Statement Number: R130000001 Amount: $431.51 01/02/201311:59 AM
Payment Method:Credit Crd Init: DR
Notation: MC MICHAEL
ROE
-----------------------------------------------------------------------------
Permit No: B13 -0001 Type: COMBINATION BLDG PERMIT
Parcel No: 2101 -123- 0100 -7
Site Address: 4500 MEADOW DR VAIL
Location: TIMBER FALLS UNIT 203
Total Fees: $605.76
This Payment: $431.51 Total ALL Pmts: $431.51
Balance: $174.25
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
ACCOUNT ITEM LIST:
Account Code Description Current Pmts
-------------- - - - - -- ------------------------ - - - - -- ------ - - - - --
BP 00100003111100 BUILDING PERMIT FEES 250.00
PF 00100003112300 PLAN CHECK FEES 181.51
Department of Community Development
T
K 75 South Frontage Road
Towili OF IrA1L _s Vail, CO 81657
Tel: 970 -479 -2128
www.vailgov.com
Development Review Coordinator
Application for Design Review
Minor Exterior Alteration
General Information: This application is required for all proposals involving minor changes to buildings and site improve-
ments, such as roofing, painting, window additions, landscaping, fences, retaining walls, etc. Applicable Vail Town
Code sections can be found at www.vailgov.com under Vail Information — Town Code Online. All projects requiring de-
sign review must receive approval prior to submitting a building permit application. An application for Design Review
cannot be accepted until all required information is received by the Community Development Department, as outlined in
the submittal requirements. The project may also need to be reviewed by the Town Council and /or the Planning and
Environmental Commission. Design review approval expires one year from the date of approval, unless a building per-
mit is issued and construction commences.
Fee: $250 for Multi - Family /Commercial
$20 for Single Family /Duplex
Single Family L Duplex Multi - Family ❑ Commercial
Description of the Request:
Physical Address: �{S �{� M.« -�o�.� aR. �ci Zo3
Parcel Number: (Contact Eagle Co. Assessor at 970 - 328 -8640 for parcel no.)
Property Owner: 4kca" S�(.►...t: �Lt.rL_
Mailing Address: s:!j sf
3n3 - S-2f- 7524
Owner's Signature:
Primary Contactl Owner Representative: 4�M,IZ r5n1 ! r VgA:�,9 F,
Mailing Address: �d oC Z S-o r _ Go 3 -L-
Phone: cl -� - Z 3 l - Sy c/ 9
E -Mall : I -}nti`L Gdn9 S ; � L . L oM Fax:
For Office Use Only:
Cash_ CC: Visa/ Last 4 CC # �4!�J Exp. Date:
Fee Paid: Received From:
Meeting Date: DRB No.:
Planner: Project No:
Zoning: Land Use:
Location of the Proposal: Lot: Block: Subdivision:
Auth #0&q576Check #
Wo
TO: KARL EDGERTON / PROPERTY MANAGER
TIMBER FALLS CONDO AASOCIATION
FROM : MICHAEL ROE / OWNER OPERATOR
HMR CONSTRUCTION & REMODELING LLC
Dear Mr. Edgerton,
We are hired by MR, Kieth Schneider for the window replacement of his timber falls condo unit at
4505 Meadow dr. # 203 bldg. 2.
We intend to install Pella designer series windows and patio doors in Hartford green ( exterior color)
matching all existing finishes in the existing openings, and complying w/ all TOV -BLDG codes. We look
for your approval and signature to take to the Town of Vail — design review board to begin the permit
process.
Thank you & kind regards,
Michael Roe
HMR Construction & Remodeling LLC
Po box 2502 Edwards, Co. 81632
970 -231 -9449
APPROVAL SIGNATURE
DATE:
T0: KARL EDGERTON / PROPERTY MANAGER
TIMBER FALLS CONDO AASOCIATION
FROM : MICHAEL ROE / OWNER OPERATOR
HMR CONSTRUCTION & REMODELING LLC
Dear Mr. Edgerton,
We are hired by MR, Kieth Schneider for the window replacement of his timber falls condo unit at
4505 Meadow dr. # 203 bldg. 2.
We intend to install Pella designer series windows and patio doors in Hartford green ( exterior color)
matching all existing finishes in the existing openings, and complying w/ all TOV -BLDG codes. We look
for your approval and signature to take to the Town of Vail— design review board to begin the permit
process.
Thank you & kind regards,
Michael Roe
HMR Construction & Remodeling LLC
Po box 2502 Edwards, Co. 81632
970 -231 -9449
APPROVAL SIGNATURE
DATE:
Proposal - Detailed
Pella Windows & Doors
5072 County Road #154
Glenwood Springs, CO 81601
Phone: (970)945 -2289 Fax: (970)945 -4419
Sales Rep Name: Triebel, Michael
Sales Rep Phone: (970) 945 -2289
Sales Rep E -Mail: mtriebel @pellacolorado.com
Sales Rep Fax: (970) 945 -4419
Customer Information
Project/Delivery Address
Order Information
LMS Construction
LMS Construction/Timber Falls 203
Quote Name: Designer Series
4496 E. Meadow Dr., Ste 301
4496 E. Meadow Drive
203
Order Number: 042MT0735
VAIL, CO 81657
Lot #
Quote Number: 4252160
Day Phone:
VAIL, CO 81657
Order Type: Non- Installed Sales
Mobile Phone:
County: EAGLE
Wall Depth:
Fax Number:
Owner Name:
Payment Terms: Deposit/C.O.D.
E -Mail:
LMS Construction
Tax Code: ZZA
Contact Name:
Owner Phone:
Cust Delivery Date: 12/10/2012
Quoted Date: 11/7/2012
Great Plains #: 8200230
Contracted Date: 11/14/2012
Customer Number: 1005926188
Booked Date: 11/21/2012
Customer Account: 1001678522
Customer PO #:
Customer Notes: BP B12 -0361
Line # Location: Attributes
10 Entry Desi nor Casement Pi ht 19 5 X 64 Hartford Green 4. 9116" Item Price Qty Ext'd Price
m PK#
I.0 537
Viewed From Exterior
Rough Opening: 1' 81/4" X 5'4 3/4"
Final Wall Depth: 4 -9/16"
U , g , • ,
$579.91 1 $579.91
1: Non - Standard Size Right Casement
Frame Size: 19 1/2 X 64
General Information: Standard, Clad
Exterior Color/ Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
Glass: Insulated Tempered Low E Advanced High Altitude
Hinge Panel: Clear, Tempered, Upgrade to 4mm
Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Standard 4 -sided Jamb Extension, Factory Applied, Perimeter Length = 167 ", Glazing Pressure
= 205.
For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pelia.com
Printed on 11/29/2012 Detailed Proposal Page 1 of
Customer: LMS Construction
Project Name: LMS Construction /Timber Falls
Quote Number: 4252160
203
Line # Location:
Attributes
15 Bed 1
Designer, 2 -Wide Casement, 59 X 53, Hartford Green, 4. 9116"
Item Price Qty Ext'd Price
$1,000.46 1 $1,000.46
1: 3553 Left Casement
PK #
Frame Size: 35 X 53
537
General Information: Standard, Clad
Exterior Color / Finish: Standard EnduraClad, Hartford Green
=
Interior Color / Finish: Unfinished Interior
Glass: Insulated Low E Advanced High Altitude
Viewed From Exterior
Hinge Panel: Clear, Annealed, Upgrade to 4mm
Rough Opening: 4' 113/4" X 4'5 3/4"
Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Final Wall Depth: 4 -9/16"
Unit Accessories: No Options
Grille:
Vertical Mull 1: FactoryMull, Standard (Vertical Factory) (0 ")
2: Non - Standard Size Right Casement
Frame Size: 24 X 53
General Information: Standard, Clad
Exterior Color / Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
Glass: Insulated Low E Advanced High Altitude
Hinge Panel: Clear, Annealed, Upgrade to 4mm
Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Standard 4 -sided Jamb Extension, Factory
Applied, Perimeter Length = 224 ", Glazing Pressure
= 50.
Line # Location:
Attributes
20 Bed 1
Designer, Casement Left, 19.5 X 64, Hartford Green, 4. 9116"
Item Price Qty Ext'd Price
$579.91 1 $579.91
1: No n - Standard Size Left Casement
ul�
PK#
Frame Size: 19 1/2 X 64
537
General Information: Standard, Clad
Exterior Color / Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
Glass: Insulated Tempered Low E Advanced High Altitude
Viewed From Exterior
Hinge Panel: Clear, Tempered, Upgrade to 4mm
Rough Opening: 1'8 1/4" X 5'4 3/4"
Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Final Wall Depth: 4 -9/16"
Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Standard 4 -sided Jamb Extension, Factory
Applied, Perimeter Length = 167 ", Glazing Pressure
= 205.
For more information regarding the finishing, maintenance, service and warranty of all Pella& products, visit the PellaO website at www.pelia.com
Printed on 11/29/2012 Detailed Proposal Page 2 of
Customer: LMS Construction Project Name: LMS Construction /Timber Falls Quote Number: 4252160
203
Line # Location: Attributes
25 Kitchen Designer, Casement Left, 19.5 X 39.5, Hartford Green, 4- 9116" Item Price Qty Ext'd Price
1, $398.00 1 $398.00
1: Non - Standard Size Left Casement
zr PK# Frame Size: 19 1/2 X 39 1/2
~ 537 General Information: Standard, Clad
Exterior Color/ Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
• Glass: Insulated Low E Advanced High Altitude
Viewed From Exterior Hinge Panel: Clear, Annealed, Upgrade to 4mm
Rough Opening: 1'8 1/4" X 3'4 1/4" Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Final Wall Depth: 4 -9/16" Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Standard 4 -sided Jamb Extension, Factory Applied, Perimeter Length = 118 ", Glazing Pressure
= 90.
Line # Location: Attributes
30 Dining Designer, Sliding French Door Vent I Fixed, 71.25 X 81.5, Hartford Green, 4- 9116" Item Price Qty Ext'd Price
I$1,909.01 1 $1,909.01
1: 7282 Vent / Fixed Sliding French Door
PK# Frame Size: 71 1/4 X 81 1/2
537 General information: Clad
I Exterior Color / Finish: Standard EnduraClad, Hartford Green
Interior Color/ Finish: Unfinished Interior
.o Glass: Insulated Tempered Low E Advanced High Altitude
Viewed From Exterior Hinge Panel: Clear, Tempered, Upgrade to 4mm
Rough Opening: 6'0" X 6' 10" Hardware Options: Brown Footbolt, Handle Included, Handle Included, Brown
Screen: Rolscreen, Wood Wrapped
Final Wall Depth: 4 -9/16" Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Factory Applied, Perimeter Length = 306 ", Glazing Pressure = 180.
Line # Location: Attributes
35 Living Designer, Sliding French Door Fixed I Vent 1 Fixed, 108 X 81.5, Hartford Green, 4- 9116" Item Price Qty Ext'd Price
$2,532.66 1 $2,532.66
1: 10882 Fixed / Vent / Fixed Sliding French Door
PK# Frame Size: 108 X 81 1/2
537 General Information: Clad
Exterior Color / Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
Glass: Insulated Tempered Low E Advanced High Altitude
Viewed From Exterior Hinge Panel: Clear, Tempered, Upgrade to 4mm
Rough Opening: 9'0 3/4" X 6' 10" Hardware Options: Brown Footbolt, Handle Included, Handle included, Brown
Screen: Rolscreen, Wood Wrapped
Final Wall Depth: 4 -9/16" Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Factory Applied, Perimeter Length = 379 ", Glazing Pressure = 180.
For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pelia.com
Printed on 11/29/2012 Detailed Proposal Page 3 of 9
Customer: LMS Construction
Project Name: LMS Construction /Timber Falls
Quote Number: 4252160
203
Line # Location:
Attributes
40 Bed 2
Designer, 2 -Wide Casement, 59 X 53, Hartford Green, 4. 9/16"
Item Price Qty Ext'd Price
$1,000.46 1 $1,000.46
1: 3553 Left Casement
PK #
Frame Size: 35 X 53
537
General Information: Standard, Clad
I
Exterior Color / Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
w =�
Glass: Insulated Low E Advanced High Altitude
Viewed From Exterior
Hinge Panel: Clear, Annealed, Upgrade to 4mm
Rough Opening: 4' 113/4" X 4'5 3/4"
Hardware Options: Standard Roto Operator. Brown
Screen: Full Screen, Brown, InView
Final Wall Depth: 4 -9/16"
Unit Accessories: No Options
Grille:
Vertical Mull 1: FactoryMull, Standard (Vertical Factory) (0 ")
2: Non - Standard Size Right Casement
Frame Size: 24 X 53
General Information: Standard, Clad
Exterior Color / Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
Glass: Insulated Low E Advanced High Altitude
Hinge Panel: Clear, Annealed, Upgrade to 4mm
Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Standard 4 -sided Jamb Extension, Factory Applied, Perimeter Length = 224 ", Glazing Pressure
= 50.
Line # Location:
Attributes
45 Bed 2
Designer, Casement Left, 19.5 X 64, Hartford Green, 4. 9/16"
Item Price Qty Ext'd Price
l
$579.91 1 $579.91
•f
1: Non - Standard Size Left Casement
m
PK #
Frame Size: 19 1/2 X 64
537
General Information: Standard, Clad
ti
Exterior Color / Finish: Standard EnduraClad, Hartford Green
I
Interior Color / Finish: Unfinished Interior
Glass: Insulated Tempered Low E Advanced High Altitude
Viewed From Exterior
Hinge Panel: Clear, Tempered, Upgrade to 4mm
Rough Opening: T8 1/4" X 64 3/4"
Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Final Wall Depth: 4 -9/16"
Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Standard 4 -sided Jamb Extension, Factory
Applied, Perimeter Length = 167 ", Glazing Pressure
= 205.
For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com
Printed on 11/29/2012 Detailed Proposal Page 4 of
Customer: LMS Construction Project Name: LMS Construction /Timber Falls Quote Number: 4252160
203
Line # Location: Attributes
cn 10-14 1�
Designer, Casement Right, 19.5 X 64, Hartford Green, 4- 9116"
l'
Item Price Qty
$579.91
Ext'd Price
$579.91
,
1: Non - Standard Size Right Casement
PK#
Frame Size: 19 1/2 X 64
537
General Information: Standard, Clad
I
Exterior Color/ Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
Glass: Insulated Tempered Low E Advanced High Altitude
Viewed From Exterior
Hinge Panel: Clear, Tempered, Upgrade to 4mm
Rough Opening; 1'81/4"X5'43/4"
Hardware Options: Standard Roto Operator, Brown
Screen: Full Screen, Brown, InView
Final Wall Depth: 4 -9/16"
Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Standard 4 -sided Jamb Extension, Factory Applied, Perimeter Length = 167 ", Glazing Pressure
= 205.
Line # Location:
Attributes
55 Bed 3
Designer, Sliding French Door Vent I Fixed, 71.25 X 81.5, Hartford Green, 4. 9116" Item Price Qty
Ext'd Price
$1,909.01 1
$1,909.01
1: 7282 Vent / Fixed Sliding French Door
•'^
PK#
Frame Size: 71 1/4 X 81 1/2
537
General Information: Clad
Exterior Color / Finish: Standard EnduraClad, Hartford Green
Interior Color / Finish: Unfinished Interior
.�
Glass: Insulated Tempered Low E Advanced High Altitude
Viewed From Exterior
Hinge Panel: Clear, Tempered, Upgrade to 4mm
Rough Opening: 6'0' X 6' 10"
Hardware Options: Brown Footbolt, Handle Included, Handle Included, Brown
Screen: Rolscreen, Wood Wrapped
Final Wall Depth: 4 -9/16"
Unit Accessories: No Options
Grille:
Wrapping Information: Foldout Fins, Factory Applied, 4- 9/16" Factory Applied, Perimeter Length = 306 ", Glazing Pressure = 180.
Line # Location:
Attributes
60
OBLTBZ00 - Keylock, Oil Rubbed Bronze, Keyed Alike Item Price Qty
Ext'd Price
$10.10 3
$30.30
For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com
Printed on 11/29/2012 Detailed Proposal Page 5 of
Customer: LMS Construction Project Name: LMS Construction /Timber Falls Quote Number: 4252160
203
Line # Location: Attributes
65 S & H Tailgate Zone 2 - Std Shipping & Handling non - taxable Z2 Item Price Qty Ext'd Price
$295.00 1 $295.00
Thank You For Your Interest In Pella® Products
PELLA WARRANTY:
Pella products are covered by Pella's limited warranties in effect at the time of sale. All applicable product warranties are incorporated into and become a part of this contract.
Please see the warranties for complete details, taking special note of the two important notice sections regarding installation of Pella products and proper management of moisture
within the wall system. Neither Pella Corporation nor PELLA WINDOWS & DOORS, LLC will be bound by any other warranty unless specifically set out in this contract.
However, Pella Corporation will not be liable for branch warranties which create obligations in addition to or obligations which are inconsistent with Pella written warranties.
Clear opening (egress) information does not take into consideration the addition of a Rolscreen [or any other accessory] to the product. You should consult your local building code
to ensure your Pella products meet local egress requirements.
Per the manufacturer's limited warranty, unfinished mahogany exterior windows and doors must be finished upon receipt prior to installing and refinished annually, thereafter.
Variations in wood grain, color, texture or natural characteristics are not covered under the limited warranty.
BRANCH WARRANTY:
The full text of the manufacturer's current warranty can be found at <http: / /w\Aw.pella.com /products /warranty.asp >. Supplier (PWD) offers the following Limited Warranty:
LIMITED WARRANTY
PWD MAKES NO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER NATURE OR GUARANTEE, EXPRESS OR IMPLIED. UPON
REQUEST, PWD WILL PROVIDE THE MANUFACTURER'S WARRANTIES CURRENTLY IN EFFECT RELATED TO THE MATERIAL SUPPLIED. THE MANUFACTURER'S WARRANTIES
SHALL HAVE NO EFFECT UNTIL PWD HAS BEEN PAID IN FULL ALL SUMS DUE AND OWING FOR THE PRODUCT OR MATERIALS SUPPLIED PURSUANT TO THIS CONTRACT.
In no event shall PWD or Pella Corporation be liable for consequential, indirect or incidental damages or for any amount in excess of the purchase price whether the claim is for breach of
warranty or negligence.
NATURAL PROPERTIES OF WOOD MATERIALS
Wood is a natural product and that variations in grain and shading will occur and because no two pieces of wood are exactly alike, variations after finishing are to be expected and are not
considered defects.
For more information regarding the finishing, maintenance, service and warranty of all PellaO products, visit the Pella@ website at www.pella.com
Printed on 11/29/2012 Detailed Proposal Page 6 of
Customer: LMS Construction Project Name: LMS Construction /Timber Falls Quote Number: 4252160
203
Custom Materials
Customer recognizes and acknowledges that the product or materials supplied by PWD are custom in nature and there is no ready market or value other than for the job for which the materials
are manufactured and /or supplied. If Customer at any time fails to pay PWD for the materials supplied, PWD may, at it's option, suspend all deliveries or terminate the Contract with the
Customer. Such suspension or termination DOES NOT excuse payment for those materials and products already manufactured at the full contract price or payment for any component parts
already purchased and obtained by PWD.
Title
Title, ownership and the right to possession of the product or materials furnished or to be furnished by PWD shall remain in PWD until PWD is paid in full. PWD shall have a right to possession
of the product or materials but is not obligated to repossess the materials in the event of non - payment. PWD's right to repossess materials is in addition to, and not a limitation upon or a waiver
of PWD's other legal rights including the right to place mechanic's liens against the real property for which materials were supplied. All risk of loss or damage shall pass to the Customer upon
delivery of the materials. In the event PWD elects to repossess any materials for which payment in full has not been made, Customer shall be responsible for any damage to or loss of materials
and their component parts.
Risk of Loss
Although title and ownership and the right to possession of the materials or product furnished or delivered to the Customer shall remain with PWD until the materials are fully paid for, the risk of
loss for the product or materials once they are delivered to the Customer shall be the Customer's responsibility. Therefore, the customer must maintain sufficient insurance to cover any
damage, vandalism or any other loss to the product or materials. Any insurance proceeds would be paid over to PWD for the full amount owed to PWD in the event of any loss.
Dispute Resolution.
Direct Discussion. If a dispute arises out of or relates to this Agreement, the parties shall endeavor to settle the dispute through direct discussion.
Mediation. Disputes not resolved by direct discussion shall be submitted to mediation pursuant to the Construction Industry Mediation Rules of the American Arbitration Association. The
parties shall select the mediator within fifteen (15) days of the request for mediation. Engaging in mediation is a condition precedent to any form of binding dispute resolution. This provision
shall not act to delay Supplier filing a mechanic's lien foreclosure action. The cost of any mediation proceeding shall be shared equally by the parties participating.
TERMS & CONDITIONS:
PLEASE READ CAREFULLY AND SIGN OR INITIAL WHERE REQUIRED.YOU ARE RESPONSIBLE FOR UNDERSTANDING THE ENCLOSED INFORMATION AS IT RELATES TO
YOUR ORDER AND OUR COMPUTER PRINTOUT OF YOUR ORDER.
➢ Tax exempt #
➢ Order #
➢ Total amount of order with taxes
➢ A deposit of $
PO#
your tax rate is
is required prior to factory order.
0 TERMS OF PAYMENT
Interest of one and one half percent (1 -1/2 %) per month will be charged on all past due accounts. If Customer or Customer's agent directs PWD to retain the products or materials, although
available for delivery, customer is responsible for payment in full within 20 days after the delivery date shown below. Customer agrees to pay all costs of collection including reasonable
attorney's fees. This contract is deemed to have been entered into in the State of Colorado and Colorado law shall govern its interpretation and enforcement. Jurisdiction and venue for any
legal action shall be in the County or District Court, City and County of Denver, Colorado.
❑ Delivery
Your requested DELIVERY DATE is (MUST BE DELIVERED WITHIN 5 DAYS OF THIS DATE) In the event of failure to receive product within 10 days of your
original delivery date a storage fee of $50 per week will be accessed. Please intial . When product has been in Pella's warehouse for more than 10 days, order must be paid in full.
U DELIVERY DATES ARE NOT GUARANTEED and PWD shall not be liable for any direct, indirect or consequential damages or loss caused by delay in shipment. You will be notified
as soon as possible if delivery during the above week becomes unattainable and a new delivery week will be established. Unless other arrangements are made with PWD, deliveries
are tailgate and YOU MUST FURNISH LABOR TO UNLOAD. PWD assumes no responsibility or liability for injuries or damage to product after product leaves our truck.
For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pelia.com
Printed on 11/29/2012 Detailed Proposal Page 7 of
Customer: LMS Construction Project Name: LMS Construction /Timber Falls Quote Number: 4252160
203
• An authorized signature is required to accept delivery.
• Signed delivery tickets will be conclusive of delivery of the materials described, the quantities listed, and receipt in good and undamaged condition.
• No claims for concealed damage, errors or defects in product, materials, workmanship, or shortages will be allowed unless written notice is received by PWD within three
(3) working days after delivery. If concealed damage, errors or defects in product, materials, workmanship, or shortages are discovered and timely notice is received by
PWD, PWD will be liable only for the reasonable costs of supplying replacement or repairs.
ADDITIONS / REVISIONS /CANCELLATIONS /RETURNS
All Pella Products, including windows, doors, parts and accessories are made to order and therefore non- refunable. Please review all the attributes of your order for accuracy prior to signing
the purchase agreement.
❑ Any revisions after the contract date must be accompanied by a signed PWD Change Order Form, or by a separate contract.
❑ The terms of this Sales Contract shall apply to any additions, changes, and partial shipments requested for this job by the Customer or the Customer's agent.
ORDER CHECKLIST - Customer must initial each
I understand that I have three working days after the date of delivery to report concealed damage, errors or shortages.
I or my authorized representatives have verified the product attributes, handing, color, measurements and dimensions for the product ordered.
Deliveries require heavy lifting. I understand I must off load product from the truck tailgate into my home or garage.
I understand that a signed and dated copy of this Sales Contract must be in the possession of Pella Windows & Doors, Inc., along with my deposit check and credit application (if
either is required), before my order can be submitted to the factory for production.
I understand that all orders are subject to acceptance by an officer of PWD.
I understand that the hinging and sliding designations for ALL products are as viewed from the OUTSIDE of the structure and from left to right.
I understand that wood is a natural product and that variations in grain and shading will occur and because no two pieces of wood are exactly alike, variations after finishing are
normal and not considered defective.
I understand that building and safety code compliance is my responsibility as the purchaser.
Product warranty and other important information are contained in this document.
THIS DOCUMENT, INCLUDING ADDENDUMS IF APPLICABLE, AND THE TERMS AND CONDITIONS CONTAINS THE ENTIRE AGREEMENT AND BUYER REPRESENTS THAT HE
HAS READ, UNDERSTANDS AND AGREES TO BE BOUND BY THE SAME.
For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pelia.com
Printed on 11/29/2012 Detailed Proposal Page 8 of
Customer: LMS Construction Project Name: LMS Construction /Timber Falls Quote Number: 4252160
203
Customer Name (Please print)
Customer Signature
Date
Pella Sales Rep Name (Please print)
Pella Sales Rep Signature
Date
Order Totals
Taxable Subtotal
$11,099.54
Sales Tax @ 2.9%
$321.89
Non - taxable Subtotal
$295.00
Total
$11,716.43
Deposit Received
$5,858.22
Amount Due
$5,858.21
For more information regarding the finishing, maintenance, service and warranty of all Pella@ products, visit the Pella® website at www.pella.com
Printed on 11/29/2012 Detailed Proposal Page 9 of
Designer Series
GLAZING PERFORMANCE - TOTAL UNIT
Aluminum -Clad Wood
CASEMENT Vent
Type of Glazing
EQ
Shaded Areas Meet ENERGY STAR*
&:-
o u a° Performance Criteria in Zones Shown
LL = In V
U.S. Canadaz
VENT WITH De
2.5mm clear with 2.5mm clear HGP
:5
0.48
0.50
52
44
Zone JERI
Zone
2.5mm clear with 3mm Low -E HGP
0.40
0.47
48
53
3mm SolarETM with 3mm clear HGP
0.40
0.30
34
53
3mm clear with 3mm clear HGP
0.48
0.49
51
44
3mm clear with 3mm Low -E HGP
TINTED GLAZING
0.40
0.47
48
53
3mm Bronze with 3mm clear HGP
0.48
0.40
38
44
3mm Bronze with 3mm Low -E HGP
0.40
0.37
35
53
3mm Gray with 3mm clear HGP
0.48
0.37
34
44
3mm Gray with 3mm Low -E HGP
0.40
0.34
32
53
3mm Green with 3mm clear HGP
0.48
0.33
43
44
3mm Green with 3mm Low -E HGP
0.40
0.30
40
53
VENT WITH TRIPLE-PANE GLAZING
5/8" clear IG with 3mm glass with 3mm clear HGP
0.36
0.44
47
58
5/8" clear IG with 3mm glass with 3mm Low -E HGP
0.32
0.42
44
60
24
5/8" Advanced Low -E IG with 2.5mm glass with argon with 2.5mm clear HGP
0.28
0.22
40
62
18
5/8" Advanced Low -E IG with 2.5mm glass with argon with 2.5mm Low -E HGP
0.26
0.22
38
62
20
5/8" Advanced Low -E IG with 3mm glass with argon with 3mm Low -E HGP
0.26
0.21
37
62
20
6 mm /3mm Advanced Low -E laminated IG with argon with 3mm Low -E HGP
0.28
0.22
39
61
18
b mm /3mm Advanced Low -E laminated IG with argon with 4mm Low -E HGP
0.28
0.22
39
62
18
5/8" NaturalSun Low -E IG with 2.5mm glass with argon with 2.5mm clear HGP
0.28
0.41
46
62
29
5/8" NaturalSun Low -E IG with 2.5mm glass with argon with 2.5mm Low -E HGP
0.26
0.39
43
62
30
5/8" NaturalSun Low -E IG with 3mm glass with argon with 3mm Low -E HGP
0.26
0.38
42
62
29
5/8" SunDefenseTm Low -E IG with 2.5mm glass with argon with 2.5mm clear HGP
0.28
0.17
37
62
15
5/8" SunDefenseTm Low -E IG with 2.5mm glass with argon with 2.5mm Low -E HGP
0.25
0.16
35
62
18
5/8" SunDefenseTm Low -E IG with 3mm glass with argon with 3mm clear HGP
0.28
0.17
37
62
15
5/8" SunDefenseTm Low -E IG with 3mm glass with argon with 3mm Low -E HGP
0.26
0.16
34
62
17
5/8" SunDefenseTm Low -E IG with 4mm glass with argon with 4mm clear HGP
0.29
0.17
36
61
14
5/8" SunDefenseTm Low -E IG with 4mm glass with argon with 4mm Low -E HGP
0.27
0.16
34
62
15
5/8" Bronze Advanced Low -E IG with 5mm /3mm glass with argon with 2.5mm clear HGP
0.30
0.19
26
61
13
5/8" Bronze Advanced Low -E IG with 5mm /3mm glass with argon with 3mm clear HGP
0.30
0.19
26
61
13
5/8" Bronze Advanced Low -E IG with 5mm /3mm glass with argon with 3mm Low -E HGP
0.27
0.18
24
61
17
5/8" Bronze Advanced Low -E IG with 5mm /4mm glass with argon with 4mm Low -E HGP
0.27
0.18
24
61
17
5/8" Gray Advanced Low -E IG with 5mm /3mm glass with argon with 2.5mm clear HGP
0.30
0.18
22
61
13
5/8" Gray Advanced Low -E IG with 5mm /3mm glass with argon with 3mm clear HGP
0.30
0.18
22
61
13
5/8" Gray Advanced Low -E IG with 5mm /3mm glass with argon with 3mm Low -E HGP
0.27
0.16
21
61
15
5/8" Gray Advanced Low -E IG with 5mm /4mm glass with argon with 4mm Low -E HGP
0.27
0.16
20
61
15
5/8" Green Advanced Low -E IG with 5mm /3mm glass with argon with 2.5mm clear HGP
0.30
0.19
31
61
13
5/8" Green Advanced Low -E IG with 5mm /3mm glass with argon with 3mm clear HGP
0.30
0.19
31
60
13
5/8" Green Advanced Low -E IG with 5mm /3mm glass with argon with 3mm Low -E HGP
0.27
0.18
29
61
17
5/8" Green Advanced Low -E IG with 5mm /4mm glass with argon with 4mm Low -E HGP
0.27
0.17
29
61
16
-•
5/8' Advanced Low -E HA IG with 3mm glass with 3mm clear HGP
0.30
0.22
40
61
15
5/8" Advanced Low -E HA IG with 4mm glass with 4mm clear HGP
0.32
0.22
39
61
13
5/8" Advanced Low -E HA IG with 3mm glass with 3mm Low -E HGP
0.28
0.21
37
62
17
5/8" Advanced Low -E HA IG with 4mm glass with 4mm Low -E HGP
0.29
0.21
37
61
16
5/8" NaturalSun Low -E HA IG with 3mm glass with 3mm clear HGP
0.31
0.39
45
61
24
5/8" NaturalSun Low -E HA IG with 4mm glass with 4mm clear HGP
0.32
0.38
45
60
22
5/8" NaturalSun Low -E HA IG with 3mm glass with 3mm Low -E HGP
0.28
0.38
42
61
27
5/8" NaturalSun Low -E HA IG with 4mm glass with 4mm Low -E HGP
0.29
0.36
42
61
25
Pella 2013 Architectural Design Manual I Division 08 - Openings I Windows and Doors I www.PellaADM.com CM-12
Designer Series
GLAZING PERFORMANCE - TOTAL UNIT
Aluminum -Clad Wood
CASEMENT Fixed
Shaded Areas Meet ENERGY STAR'
`o v e Performance Criteria in Zones Shown
Type of Glazing A = U U. S. Canada s
DOUBLE-PANE FIXED WITH
3mm clear with 3mm clear HGP
5
0.48
0.59
61
45
Zone
I ER
Zone
3mm clear with 3mm Low -E HGP
0.38
0.56
58
53
1
125
3mm SolarETM with 3mm clear HGP
0.38
0.36
41
52
TINTED GLAZING
3mm Bronze with 3mm clear HGP
0.48
0.48
46
45
3mm Bronze with 3mm Low -E HGP
0.38
0.44
43
53
3mm Gray with 3mm clear HGP
0.48
0.44
41
45
3mm Gray with 3mm Low -E HGP
0.38
0.40
38
53
3mm Green with 3mm clear HGP
0.48
0.39
52
45
3mm Green with 3mm Low -E HGP
0.38
0.35
49
53
5/8" clear with 3mm glass with 3mm clear HGP
0.35
0.53
57
58
27
5/8" clear with 3mm glass with 3mm Low -E HGP
0.29
0.50
53
60
33
5/8" Advanced Low -E IG with 2.5mm glass with argon with 2.5mm clear HGP
0.25
0.26
49
62
24
5/8" Advanced Low -E IG with 2.5mm glass with argon with 2.5mm Low -E HGP
0.22
0.25
46
62
27
5/8" Advanced Low -E IG with 3mm glass with argon with 3mm clear HGP
0.25
0.26
48
62
24
5/8" Advanced Low -E IG with 3mm glass with argon with 3mm Low -E HGP
0.23
0.25
45
62
26
5/8" Advanced Low -E IG with 4mm glass with argon with 4mm clear HGP
0.27
0.26
47
61
21
5/8" Advanced Low -E IG with 4mm glass with argon with 4mm Low -E HGP
0.24
0.25
44
62
24
5/8" NaturalSun Low -E IG with 2.5mm glass with argon with 2.5mm clear HGP
0.25
0.49
55
62
37
5/8" NaturalSun Low -E IG with 2.5mm glass with argon with 2.5mm Low -E HGP
0.23
0.47
52
62
38
5/8" NaturalSun Low -E IG with 3mm glass with argon with 3mm clear HGP
0.26
0.48
55
62
35
5/8" NaturalSun Low -E IG with 3mm glass with argon with 3mm Low -E HGP
0.23
0.45
51
62
37
5/8" NaturalSun tow -E IG with 4mm glass with argon with 4mm clear HGP
0.27
0.46
54
61
33
5/8" NaturalSun Low -E IG with 4mm glass with argon with 4mm Low -E HGP
0.24
0.44
50
62
35
5/8" SunDefenseTm Low -E IG with 2.5mm glass with argon with 2.5mm clear HGP
0.24
0.20
45
62
22
5/8" SunDefenseTm Low -E IG with 2.5mm glass with argon with 2.5mm Low -E HGP
0.22
0.19
42
62
23
5/8" SunDefenseTm low -E IG with 3mm glass with argon with 3mm clear HGP
0.25
0.20
44
62
20
5/8" SunDefenseTm Low -E IG with 3mm glass with argon with 3mm Low -E HGP
0.22
0.19
42
62
23
5/8" SunDefenseTm Low -E IG with 4mm glass with argon with 4mm clear HGP
0.27
0.20
44
62
18
5/8" SunDefenseTm Low -E IG with 4mm glass with argon with 4mm Low -E HGP
0.24
0.19
41
62
21
Climate
R -Value - 1 /U- Factor See the Product Performance section for more
SHGC - Solar Heat Gain Coefficient detailed information or visit www.energystar.gov
VLT % - Visible Light Transmission for Energy Star guidelines.
CR - Condensation Resistance
ER = Canadian Energy Rating
(1) Glazing performance values are calculated based on NFRC 100.
(2) The values shown are based on Canada's updated ENERGY STAR® initiative.
Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown.
Pella 2013 Architectural Design Manual I Division 08 - Openings I Windows and Doors I www.PellaADM.com CM -1 3
NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL TIMES
TOWN OF VAII,
Town of Vail, Community Development, 75 South Frontage Road, Vail, Colorado 81657
p. 970.479.2139, f. 970.479.2452, inpsections 970.479.2149
COMBINATION BLDG PERMIT Permit #: 1313 -0001
Job Address: 4500 MEADOW DR VAIL
Location......: TIMBER FALLS UNIT 203
Parcel No....: 210112301007
OWNER SCHNEIDER, MARY E. & KEITH B 01/02/2013
5455 LANDMARK PL 913
GREENWOOD VILLAGE, CO
801111956
Project #: PRJ13 -0001
Applied.....: 01/02/2013
Issued...: 01/03/2013
APPLICANT HMR CONSTRUCTION & REMODELIN 01/02/2013 Phone: 970 - 231 -9449
PO BOX 2502
EDWARDS
CO 81632
License: C000003452
CONTRACTOR HMR CONSTRUCTION & REMODELIN 01/02/2013 Phone: 970 - 231 -9449
PO BOX 2502
EDWARDS
CO 81632
License: C000003452
Description:
SAME FOR SAME REPLACEMENT OF EXISTING WINDOWS.
Occupancy:
Type Construction:
Valuation: $17,000.00
.................................................. ...............................
FEE SUMMARY
.....,,,...,........,..__.,..................,,,
...............,.......,,.,,.,_
Building Permit ------ - - - - ->
$279.25
Bldg Plan Check ----- - - - - ->
$181.51
Use Tax Fee------------------ - - - - ->
$140.00
Electrical Permit ---- - - - - ->
$0.00
Elec Plan Check ------ - - - - ->
$0.00
Restuarant Plan Review--- - - - - ->
$0.00
Mechanical Permit - - - - - ->
$0.00
Mech Plan Check ---- - - - - ->
$0.00
Additional Fees--------------- - - - - ->
$0.00
Plumbing Permit --- - - - - ->
$0.00
Plmb Plan Check --- - - - - ->
$0.00
Recreation Fee--------------- - - - - ->
$0.00
Investigation------------------ - - - - ->
$0.00
Will Call------------------------------ >
$5,00
TOTAL PERMIT FEES--------- - - - - ->
$605.76
Payments ------------------------------- >
$605.76
BALANCE DUE ------------------------ >
$0.00
DECLARATIONS
agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure
according to the town's zoning and subdivision codes, design review approved, International Building and Residential Codes and
other ordinances of the Town applicable thereto.
REQUESTS FOR INSPECTION SHALL BE MADE TWENTY -FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149
OR AT OUR OFFICE FROM 8:00 AM - 4:00 PM.
combination permit-012811
CONDITIONS OF APPROVAL TO BE MET PRIOR TO FINAL SIGN OFF
Permit #: B13 -0001 Address: 4500 MEADOW DR VAIL
Owner: SCHNEIDER, MARY E. & KEITH B. Location:
TIMBER FALLS UNIT 203
f1Rlfifififififififififi111111fififififititfi }f }}f fi }RR4f'filrf Y} }11111fif'fif'f'1rfAfif lfYef 1111 }111fif }fifififiYrttff} }}111 }lffififitHrtf ff }# fififififififififi1111f } } }f }fifififififA4Yf1f }f fek #fififif'f'1f11f } } }fit4trfrfififififi4fiffffiFY(f } } }fiff
combination permit-012811
*VAIL TOWN
w,+,r * *,rr,r *•rxwx +..* *. *. +. * *�,r� «r,+ *,r* «* * * * ** r..., r.** w, rwr++* ww, r* wwrww« �*, r** �r, r* wwww. w. wr, rwr�**, rw««««« w* w, r**, rw�rrr, rrrwwwftsrw, r, r* xwx ,�,t,rw «r * «rr,rr * *,r,r,rww.ww
REQUIRED INSPECTIONS AND STATUSES
Permit #: B13 -0001 Address: 4500 MEADOW DR VAIL
Owner: SCHNEIDER, MARY E. & KEITH B. Location:
TIMBER FALLS UNIT 203
Item: 00542 PLAN -FINAL
Item: 00090 BLDG -Final
combination permit-012811
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
TOWN OF VAIL, COLORADOCopy Reprinted on 01 -03 -2013 at 10:57:39 01/03/2013
Statement
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
Statement Number: R130000002 Amount: $174.25 01/03/201310:57 AM
Payment Method:Credit Crd Init: DR
Notation: MC MICHAEL
ROE (HMR CONST)
-----------------------------------------------------------------------------
Permit No: B13 -0001 Type: COMBINATION BLDG PERMIT
Parcel No: 2101- 123 - 0100 -7
Site Address: 4500 MEADOW DR VAIL
Location: TIMBER FALLS UNIT 203
Total Fees: $605.76
This Payment: $174.25 Total ALL Pmts: $605.76
Balance: $0.00
************************************************************* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * **
ACCOUNT ITEM LIST:
Account Code Description Current Pmts
-------------- - - - - -- ------------------------ - - - - -- ------ - - - - --
BP 00100003111100 BUILDING PERMIT FEES 29.25
UT 11000003106000 USE TAX 4% 140.00
WC 00100003112800 WILL CALL INSPECTION FEE 5.00
r
01 -22 -2013 Inspection Request Reporting a a 13
4:26 pm P Vim, COQ- City Of 9 itTl z_—_ �d0 � 9
Requested Inspect Date: Wednesdayy January 23, 2013
Site Address: 4500 MEADbW DR VAIL
TIMBER FALLS UNIT 203
A/P /D Information
Activity: B13 -0001 Type: COMBO Sub Type: AMF Status: ISSUED
Const Type: Occupancy: Use: Insp Area:
Owner: SCHNEIDER, MARY E. & KEITH B.
Contractor: HMR CONSTRUCTION & REMODELING LLC Phone: 970 - 231 -9449
Description: SAME FOR SAME REPLACEMENT OF EXISTING WINDOWS.
Reauested Inspection(s)
Item:
542 PLAN -FINAL
Requested Time:
08:00 AM
Requestor:
Comments:
231 -9449
Phone:
Assigned To:
B
Entered By:
MHAEBERLE K
Action:
Time Exp:
Item:
90 BLDG -Final
Requested Time:
08:00 AM
Requestor:
Phone:
Comments:
231 -944
Assigned To:
SGRE
Entered By:
MHAEBERLE K
Action: Time Exp:
5/13
Inspection History
Item: 542 PLAN -FINAL
Item: 90 BLDG -Final
REPT131 Run Id: 15055