Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Lionshead Welcome Center Council Appeal Memo and Attachments 110612
TOWN OF 0) VAIL' TO: Vail Town Council FROM: Community Development Department DATE: November 6, 2012 Action: Uphold the DRB denial Motion: Greg Moffet Second: Ludwig Kurz Vote: 6 -1 -0 (Rogers opposed) Memorandum SUBJECT: An appeal, pursuant to Section 12 -3 -3, Appeals, Vail Town Code, of the Town of Vail Design Review Board's approval, with conditions, of a design review application for signage on the Lionshead Welcome Center, located at 395 East Lionshead Circle /Lot 1, Block 2, Vail Lionshead Filing 1, and setting forth details in regard thereto. (DRB120461) Appellant: Vail Town Council Planner: Warren Campbell I. SUBJECT OF THE APPEAL The appellant, Vail Town Council, filed an appeal (call -up), pursuant to Section 12 -3 -3, Appeals, Vail Town Code, of the Town of Vail Design Review Board's October 3, 2012, approval, with conditions, of a design review application for signage on the Lionshead Welcome Center, located at 395 East Lionshead Circle. On October 3, 2012 the Design Review Board unanimously approved, with conditions, an application to amend the sign package for the Lionshead Welcome Center. The conditions were as follows: 1. The applicant shall install all pole mounted signage a maximum of 15 inches below the top of the pole. 2. The applicant shall place a dome cap on top of all poles which do not have a light fixture atop. 3. The applicant shall place a consistent Vail buckle detail on all signage poles. 4. This approval does not include the information "i" on the architectural tower. 5. The applicant shall remove the "PI "parking sign located on the west wall in the pedestrian portal to the skier drop off. 6. The applicant shall use the uppercase "P" in the parking level signs. The Design Review Board made several findings with regard to the exclusion of approval for the information 'T' on the Lionshead Welcome Center architectural tower element (one 'T' on the north and south sides of the tower for a total of two). The findings were as follows: • Pursuant to Section 11 -5 -2A, Design Guidelines, Vail Town Code, the Board found that the proposed location, configuration, design, and size were not harmonious with the mountain setting and the alpine village atmosphere of the town. • Pursuant to Section 11 -5 -213, Design Guidelines, Vail Town Code, the Board found that the proposal, when reviewed in the context of the number of information way finding signs in the round - about, along the Frontage Road and on East Lionshead Circle, resulted in the "i" creating visual clutter. • Pursuant to Section 11 -5 -3, Design Standards, Vail Town Code, the Board found that the inclusion of the "i" on the architectural tower element detracted from the primary architectural element of the new Lionshead Welcome Center and would visually dominate the tower. It was discussed that during the design review of the project, options proposing to utilize television screens on the tower to provide for animation and messages were rejected for these same reasons. Just as in the initial review the "i" turns the architectural tower element into a billboard which was found not to be in compliance with the Sign Code. II. APPLICABLE DOCUMENTS Vail Town Code Title 11, SIGN REGULATIONS (in part) 11 -5 -2: DESIGN GUIDELINES: Any sign erected within the town of Vail should: A. Be consistent with the scale and architecture already present in the town. Sign location, configuration, design, and size should be aesthetically harmonious with the mountain setting and the alpine village atmosphere of the town. B. Be compatible with the placement of surrounding signs: Similar signs should not be placed within close proximity of each other, but should instead incorporate variety and visual interest within the "view corridor" that they are placed. Signs shall not create visual clutter. The staff shall review all proposed signs in the context of adjacent signage to verify that the sign is appropriately placed. 11 -5 -3: DESIGN STANDARDS: Any sign erected within the town of Vail shall conform to the following standards: Town of Vail Page 2 A. Compatibility: Signs shall be visually compatible with the size of surrounding structures and other signage and shall not visually dominate the structure or business to which they belong. The staff shall review all proposed signs in the context of adjacent signage to verify that the sign is appropriately sized. III. SUBJECT PROPERTY The subject property is located at 395 East Lionshead Circle /Lot 1, Block 2, Vail Lionshead Filing 1. IV. STANDING OF APPELLANT Pursuant to Section 12 -3 -3, Appeals, Vail Town Code, the appellant has standing as the property owner to appeal the Design Review Board's October 3, 2012, decision. V. REQUIRED ACTION Pursuant to Section 12 -3 -3, Appeals, Vail Town Code, the Vail Town Council shall uphold, uphold with modifications, or overturn the Design Review Board's October 3, 2012, decision. VI. DESIGN REVIEW BOARD RECOMMENDATION The Design Review Board recommends that the Town Council upholds its October 3, 2012 decision regarding DRB120461 based upon, the evidence and testimony presented, and the findings of fact listed below. The Design Review Board recommends the Vail Town Council makes the following findings of fact: • On October 3, 2012, the Design Review Board, held a public hearing on the applicant's request for an amendment to the sign package for the Lionshead Welcome Center at 395 East Lionshead Circle in accordance with Section 11 -4 -2, Sign Application Review, Vail Town Code. • On October 3, 2012, based upon the review of the application to the Design Review Board, the Board's site visit to the subject property, and the evidence and testimony presented, the Design Review Board found that the proposed information "i" on the tower did not comply with Sections 11 -5 -2, Design Guidelines, and 11 -5 -3, Design Standards, Vail Town Code. • On October 3, 2012, the Design Review Board unanimously approved, Town of Vail Page 3 with conditions, the applicant's request for an amendment to the Lionshead Welcome Center sign package. • On October 9, 2012, the appellant, Vail Town Council filed an appeal (called -up) of the Design Review Board's October 3, 2012, decision in accordance with Section 12 -3 -3, Appeals, Vail Town Code. • Notice of the Vail Town Council's hearing of this appeal has been completed in accordance with the provisions of Section 12 -3 -3, Appeals, Vail Town Code. The Design Review Board recommends the Vail Town Council makes the following conclusion: 'Based upon a review of the Staff's November 6, 2012, memorandum to the Vail Town Council, the evidence and testimony presented, and the finding of facts, the Vail Town Council concludes: The Design Review Board's October 3, 2012, approval, with conditions, of a design review application for signage on the Lionshead Welcome Center, located at 395 East Lionshead Circle /Lot 1, Block 2, Vail Lionshead Filing 1, and setting forth details in regard thereto, meets the standards and conditions imposed by the requirements of the Vail Town Code." The Design Review Board recommends the Vail Town Council makes the following motion: "Based upon a review of the Staff's November 6, 2012, memorandum to the Vail Town Council, the evidence and testimony presented, and the finding of facts, the Vail Town Council upholds the Design Review Board's October 3, 2012, approval, with conditions, of a design review application for signage on the Lionshead Welcome Center, located at 395 East Lionshead Circle /Lot 1, Block 2, Vail Lionshead Filing 1, and setting forth details in regard thereto, based upon the conclusion that the Board's determination meets the guidelines and standards imposed by the requirements of the Vail Town Code." VII. ATTACHMENTS A. Rendering of proposed information I" on the Lionshead Welcome Center Tower dated September 19, 2012 B. Approved sign program for the Lionshead Welcome Center dated October 4, 2012 Town of Vail Page 4 Day View from North a �r Night View from North A Photo Composites SCALE:NTS Icons would be placed on NE and SW faces of tower, visible from the highway /Frontage Rd. and when exiting from the Lionshead Village. Icons are fabricated from 1/8" aluminum plate. Faces painted P.5 (Tapestry Gold), returns painted P.6 (Bittersweet Chocolate). Rear surfaces to be sealed to prevent animal habitation. Icons pinned 1 1/2" off corten metal grills of tower. Icons are externally illuminated by discreet LED downlight fixtures mounted at the forward edge of the tower roof structure. Fixture wattage to achieve a slight glow, not a harsh, bright level of illumination. Day View from South �'T��6��-gRIIIAF��,,yy �Sp EJ�f- �9rq., q'1'Y.A HINGIL I V All E tit T— 10* j °— North Elevation r AM I Elevations SCALE: 1/4" -1' -0" 16 ACA Wy'IC�A'�I f� ST L.I..I, PAWL REUN ill Or 16 Earl y 'nI SPELL MEL ML1��yMp{,� p��AT 10�1 llPwl04 w14P'4 1 mfr ED AV CON". Thf 10. C17T 'W 4'� 4' -6" 5`— 10' Side Elevation South Elevation d� m� 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 19 September, 2012 J W J Z O LU Z V O LU O U J W v a W 2 VJ Z O J prepared for the TOWN OF VAIL W E L C O M E C E N T E R BUILDING SIGNAGE & GRAPHICS Design Intent 4 October, 2012 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 Approved by the www.commarts- boulder.co Design Review Board www.stantee.com 0 TOWN OF VAI L I By Warren Campbell at 10:36 am, Oct 15, 2012 0' rowN of VAIL Approved by the Design Review Board By Warren Campbell at 10:36 am, Oct 15, 2012 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 r� J W � Z O W Z V �S O ry O V J W Q W S ti Z O Metal sign face on fabricated frame pinned off (stone, wood,...) surfaces. Painted graphics. Non illuminated. 1.5 1 Public Room I.D. (with icon) 18 1 ADA compliant tactile identification signs for all rooms & spaces: restrooms, lockers, utility rooms. Current units should be replaced by project specific (color, typeface). 1.6 Designated Space I.D. Pole mount (typ.) sign panels identifying reserved parking spaces or curb areas. Project specific colors /typefaces replace any existing off - the -shelf units. r Clearance I.D. Suspended thin wall aluminum tubes identifying the clearance limits of the parking structure. Inexpensive machine -cut reflective & matte vinyl graphics. 1.8 Temp. I.D. )?stalled August, 2012 Met hics. Non illuminated. Project Directories Elevator Lobby Directory 4 Destination and facility listings, including international symbols, located at all elevator lobbies. May include Level I.D. sign violator panels. 2.1.2 Elevator Cab Directory 2 Destination and facility listings, including international symbols, located in all elevator cabs. 2.2c Entry Door 50th Anniversary Logos 5 Temporary decals celebrating the town's 50th anniversary. Full color digital prints on white vinyl. 2.4 Temporary /Moveable Informational 2 Vehicular and Pedestrian scaled temporary /moveable sign assemblies, deployed as required. 5 Misc. Informational 1 As required. Approved by the 0 Stantec C commarts Design Review Board TOWN OF CIA l Z 1 By Warren Campbell at 10:37 am, Oct 15, 2012 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 ' I n i n v n t � www.commarts- boulder.com www.stantec.com ,ge No. Sign Type Quantity Unit Cost , Description BLDG. SIGNAGE & GRAPHICS Design Intent IDENTIFICATION 4 October, 2012 _ 1.1.2 Secondary elcome Center I.D. ry 1 Project signature not an entry) on North side of building at parking level 1 skier drop-off area. External) illuminated corten sin panel and edge lit icon sign assemblies. 1 9 ( Y) 9 P 9 p Y� 9 P 9 9 " 1.3 2 � u, I- � z Entry I.D. o w Z v Primary Project Entry I Primary South face street level entry into Welcome Center facility. Externally illuminated corten sign panel and edge lit icon sign assemblies. �: CM W 1.2.2 VRD Entry I.D. 1 North 2nd level entry into VRD facilities. Externally illuminated corten sign panel sign assembly. ~ 0 c.D 1.2.4 Drop -Off, Short Term Parking Garage Entry (West Elevation) 1 West street level entry into short term /skier drop -off area of parking structure. (Existing) Externally illuminated corten sign panel and edge lit icon sign assemblies. _J W �. est street ° p Facility I.D. C3 Metal sign face on fabricated frame pinned off (stone, wood,...) surfaces. Painted graphics. Non illuminated. Q w 1.3.1s Small Flat Mount Panels 1 Smaller version of above. = BI _ y z Freestanding clustered pole assembly with blade mount sign panels. o 1 (1 panel) 1.3.5 Suspended Icon 1 Fabricated Information icon cabinet with edge illuminated frosted acrylic behind corten face plate. Assembly suspended from base plate. Metal sign face on fabricated frame pinned off (stone, wood,...) surfaces. Painted graphics. Non illuminated. 1.5 1 Public Room I.D. (with icon) 18 1 ADA compliant tactile identification signs for all rooms & spaces: restrooms, lockers, utility rooms. Current units should be replaced by project specific (color, typeface). 1.6 Designated Space I.D. Pole mount (typ.) sign panels identifying reserved parking spaces or curb areas. Project specific colors /typefaces replace any existing off - the -shelf units. r Clearance I.D. Suspended thin wall aluminum tubes identifying the clearance limits of the parking structure. Inexpensive machine -cut reflective & matte vinyl graphics. 1.8 Temp. I.D. )?stalled August, 2012 Met hics. Non illuminated. Project Directories Elevator Lobby Directory 4 Destination and facility listings, including international symbols, located at all elevator lobbies. May include Level I.D. sign violator panels. 2.1.2 Elevator Cab Directory 2 Destination and facility listings, including international symbols, located in all elevator cabs. 2.2c Entry Door 50th Anniversary Logos 5 Temporary decals celebrating the town's 50th anniversary. Full color digital prints on white vinyl. 2.4 Temporary /Moveable Informational 2 Vehicular and Pedestrian scaled temporary /moveable sign assemblies, deployed as required. 5 Misc. Informational 1 As required. Approved by the Design Review Board Yn]Arr11 nr I " J" ik 12v IA/mrrnn 1'`!2rnrnhn11 !3* 411.4f2 mm ni+t 41Z 91149 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October. 2012 tr J W W Z O NJ Z V O yLI F� O GD J W D Q W S CO) Z O J contractor performance & material requirements This document has been assembled by Stantec /CommArts with the expectation that the Contractor will meet the following quality and performance requirements. The acceptance of these drawings by the Fabricator constitutes agreement to comply with the following conditions. The Owner will hold the Fabricator to these requirements as part of their contract obligations. I. GENERAL A. Proprietary Information Non - Disclosure Agreement All ideas, designs, arrangements and plans indicated or presented by these drawings are the property of the Owner and were created for use in connection with the specified project. The information in this document is confidential and shall not be disseminated to anyone other than Stantec /CommArts, the Owner or the Contractor's personnel necessary to execute the contract, without the written permission of Stantec /CommArts and the Owner. In addition, the Contractor must request and receive written approvals from both the Owner and Stantec /CommArts to use images of any completed element. The Contractor is responsible for ensuring that credit indicating Stantec /CommArts as the Designer will accompany all images and articles related to the project. The Owner may have additional requirements or restrictions for which the Contractor is also responsible. B. Design Intent Drawings The "design intent" drawings contained in this document are for the sole purpose of expressing visual design intent and are not intended for construction purposes. All aspects of fabrication, installation and any resulting working drawings, shop drawings, submittals, building permits meeting 2011 IBC with necessary professionally engineered drawings and contract documents are the responsibility of the Contractor. Within the design intent drawings: • All written dimensions take precedence over dimensions otherwise implied by drawing scale, figures, etc. • Large scale details take precedence over the smaller scale drawings. • Specific recommendations for materials, colors and content take precedence over representations shown in drawings. II. PRE - FABRICATION REQUIREMENTS A. Proposal Copies of all pricing and bid information shall be sent to the Owner and Stantec/CommArts. The Contractor shall base their proposal on the performance of all items or service including labor, materials, equipment and resources 0 Approved by the Design Review Board TOWN Of VAI L " By Warren Campbell at 10:38 am, Oct 15, 2012 required to complete fabrication and installation of the specified work. Full compliance with these Contractor Performance and Material Requirements will be required.The Contractor is encouraged to make recommendations for specific changes if they will improve the quality or cost - effectiveness of fabrication while preserving Stantec /CommArts' visual design intent. However, any such recommendations must be approved in writing by the Owner and Stantec /CommArts at the time of bid. Should the Contractor be contracted based on a proposal that assumes substitutions that have not been properly approved, the Contractor shall be responsible for providing all elements as originally indicated at their own expense. B. Shop Drawings The Contractor shall submit shop drawings of all fabricated items to the Owner and Stanec /CommArts. This submission shall consist of three hard copy sets of detailed drawings that indicate all materials, finishes, construction details, lighting requirements, installation details and artwork, including locations of all material seams. Drawings shall include elevations, plans, sections and notes as required to clearly convey fabrication intent. Stantec /CommArts will review samples for aesthetic appearance and compatibility with adjacent conditions. Compliance with other requirements is the exclusive responsibility of the Contractor. Upon review, the Contractor shall make all requested revisions and resubmit as required. A complete set of approved shop drawings (noted "No Exceptions Taken" or "Exceptions as Noted ") must be received from both the Owner and Stantec /CommArts before production may begin. C. Submittals The Contractor is responsible for providing submittals to the Owner and Stantec /CommArts as required per "Quantities & Submittals" section of this document. Stantec /CommArts will review samples for aesthetic appearance and compatibility with adjacent conditions. Compliance with other requirements is the exclusive responsibility of the Contractor. All materials, finishes and content are subject to revision until final submittals have been approved. A complete set of approved submittals must be received from both the Owner and Stantec /CommArts before fabrication may begin. Required submittals must be issued in an adequate time frame to allow review, adjustments and approval without delaying the project schedule. III. FABRICATION & INSTALLATION REQUIREMENTS A. Permitting & Regulation Compliance The Contractor is responsible for securing and paying for all permits, insurances, inspections and tests required by governmental agencies. The Contractor is responsible for submitting all necessary permit information to the Building Department review and approval for all applicable permits as rquired per the Town of Vail and 2011 IBC. The Fabricator is also responsible for verifying and ensuring compliance with all ADA, OSHA, environmental regulations and all other applicable governing code requirements. All required resolutions or revisions to construction details must be approved by the Owner and Stantec /CommArts prior to production. B. Structural Requirements The Contractor shall follow Stantec /CommArts' drawings for exterior visual appearance but designs of internal structure, engineered connections, mounting assemblies and foundations are by the Contractor. Structural design shall utilize self- supportive framing and prevent irregularities in exposed surfaces. Deliverables: • The Contractor shall reference Architecural Drawings for full mounting location conditions and shall coordinate all necessary waterproofing, support and /or blocking requirements and approximate weights for each element as required no later than twenty -one days after final shop drawing approval. Drawings will be provided in electronic format (PDF) by Owner. The Fabricator shall provide the Owner and /or the GC with calculations for all structural members and foundations sealed by certified engineers registered in the state of installation, prior to fabrication. C. Electrical Requirements Design of all electrical components is by the Contractor. All transformers and electrical hardware shall be concealed (i.e. non - audible and non - visible to pedestrian and vehicular traffic). The Contractor shall ensure all electrical components are easily accessible for maintenance and servicing. All necessary point -of- connection coordination is the responsibility of the Contractor. All connections must be in compliance with the requirements of the NEC and all other applicable governing code requirements. All necessary electrical components and assemblies are to be UL listed or approved by a nationally recognized testing lab. All electrical components shall be warranted against failure for at least two years. Within the warranty period, defective electrical components are to be replaced by the Contractor within forty -eight hours of notice by the Owner. Should the Contractor fail to replace defective components within the specified time, these items may be replaced by others at the Contractor's expense. Deliverables: • The Contractor shall provide the Owner with a list of electrical requirements for each element no later than twenty -one days after final shop drawing approval. D. Lighting The Contractor shall follow Stantec /CommArts' drawings for visual appearance but design of internal structure, fixtures and mounting assemblies is by the 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W LA_ z O W Z V W 0 J W v a W x y z 0 J Contractor. The Contractor shall ensure all lighting components are easily accessible for maintenance and servicing. Unless otherwise noted, the interior of all illuminated enclosures shall be painted matte white to increase reflectivity. All lighting components shall be constructed per recognized national standards and /or specific manufacturer's recommendations. All neon components shall be warranted against failure for at least three years and all other lighting components shall be warranted for at least two years. Within the warranty periods, failed lighting components are to be replaced by the Contractor within forty -eight hours of notice by the Owner. Should the Contractor fail to replace defective components within the specified time, these items may be replaced by others at the Contractor's expense. E. Labeling Visible labels, manufacturer's or otherwise, code permitting, shall not appear on any completed element. The placement of any required labels must be approved by Stantec /CommArts prior to application and installation. F. Artwork & Fonts Stantec /CommArts will provide the Contractor with layout guidelines and electronic artwork as required, however all final copy layouts are the responsibility of the Fabricator. The Contractor shall legally acquire at their own expense all project fonts from the specified distributors. Stantec /CommArts will not provide copies of licensed fonts. When stock imagery is used, Stantec /CommArts will provide the Fabricator with the image specifications and a low resolution electronic file for placement. The purchasing of high resolution final images, licensing and all applicable fees are the responsibility of the Contractor. All acquired images shall be registered in the Owner's name. G. On -Site Coordination All locations shown in the enclosed location plans are approximate. The Contractor is responsible for referencing applicable Architectural Drawings, field verification and coordination of all final locations. The Contractor shall notify the Owner and Stantec /CommArts of any discrepancies between Stantec /CommArts' drawings, location plans or message schedule and field conditions prior to installation. All required resolutions or revisions to construction details must be approved by the Owner and Stantec /CommArts prior to production. The Contractor's installation responsibilities include the provision of any required footings, anchor bolts or fastenings. All point -of- connection coordination is the responsibility of the Contractor. Deliverables: • The Contractor shall provide the Owner with templates and patterns as required no later than twenty -one days after final shop drawing approval. H. Safety & Responsibility The Contractor shall be responsible for providing barricade or protective coverings as necessary to safeguard the public and property during the performance and duration of their work. The Contractor shall be fully responsible for any injuries to the public or damage to the buildings, site and adjacent objects during installation. The Contractor shall be responsible for cleaning up all work areas upon the completion of work on a daily basis. All installed items shall be left in a clean and as -new condition. The Contractor shall be fully responsible for the security and quality of all equipment, materials and installed components until they have been reviewed and accepted by the Owner. III. MATERIAL STANDARDS All materials, hardware and finishes used to fabricate any and all components shall be new (i.e. not previously used or operated in any other application) and from the most recent manufacturer's production supply. A. Paints & Finishes All paints and finishes shall match exactly the color, finish and texture noted. Unless otherwise noted, all pretreats, primers, coatings and finishes shall be applied in strict accordance with the paint manufacturer's specifications to provide the highest level of ultraviolet light resistance, weatherability and overall longevity for both the materials indicated and the environmental conditions of the final install locations. Paints & finishes shall be warranted against color fading, UV damage cracking, peeling, blistering and other defects in materials or workmanship for a minimum of five years from date of Owners acceptance. B. Metals Metals shall be the best commercial quality for the purposes specified and free from defects impairing strength, durability or appearance. Unless otherwise noted, all visible seams are to be continuously welded, filled and ground smooth. All sheet metal shall have brake formed edges with radii not greater than sheet thickness. All metals must be treated to prevent corrosion and staining of other finishes. C. Fasteners Unless otherwise noted, all exposed fasteners shall be tamper - proof, resistant to oxidation and other corrosion and painted to match adjacent surfaces. Concealed fasteners must be resistant to oxidation and other corrosion to prevent staining of other finishes. D. Vinyl All vinyl sheeting shall match exactly the color, finish and durability of the manufacturer's product as noted. Unless otherwise noted, all vinyl sheeting shall be installed in strict accordance with the manufacturer's specifications Approved by the Design Review Board TOWN OF VA I L By Warren Campbell at 10:38 am, Oct 15, 2012 to provide the highest level of ultraviolet light resistance, weatherability and overall longevity for both the materials indicated and the environmental conditions of the final install locations. Vinyl sheeting shall be warranted against color fading, UV damage, delamination or peeling for a period of five years from date of Owner's acceptance. E. Digital Prints All high resolution digital output must provide the highest level of ultraviolet light resistance, weatherability and overall longevity for both the materials indicated and the environmental conditions of the final install locations. Unless otherwise noted, digital prints shall have a minimum resolution of 200 dpi. Printed product shall be warranted against color fading, UV damage, delamination or peeling for a minimum of five years from date of the Owner's acceptance. IV. PROJECT COMPLETION A. Paints & Finishes The Contractor shall notify both Stantec /CommArts and the Owner in writing when all work is completed. Upon notice, Stantec /CommArts will review all work according to their contract with the Owner and prepare a punch list outlining incomplete or unsatisfactory items. The repair or replacement of work outlined on the punch list shall be coordinated between the Contractor and the Owner. B. Final Deliverables Upon the Owner's acceptance of the work, the Contractor shall provide the Owner with three copies of a complete service and maintenance manual for all products and finishes installed under their contract. This manual shall include, but is not limited to, product specifications such as manufacturer information, contact names and addresses, warranty information, technical data and routine maintenance recommendations for light fixtures, electrical components, paint, finishes and all other applicable items. C. Warranties All warranty periods shall begin on the date of the Owner's acceptance of the work. All warranties shall include the materials and labor required to replace defective components. Unless otherwise stated above, all installed components shall be warranted against manufacturer defects for a minimum of two years and all installed elements shall be warranted against defects in installation or workmanship for a minimum of three years. 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W LA_ z O W z v W 0 J W v a W 2 y z 0 J Materials /Finishes M.1 Faux Corten Finish Sample to be provided to Fabricator for matching Paints P.1 Dk. Lionshead Red 114 MP15793 Town & Country Red Vinyl M.2 M.3 Frosted Acrylic Non -glare Acrylic P.2 P.3 Lionshead Anthracite Black 22 MP12718 15 MP32156 Unicor Brown Black Magic VA V.2 U.3 Reflective White Matte White 3 -M Matte Black 3M Engineer Grade Reflective White P.4 White 13 MP32351 White Spirit Approved by the Design Review Board TOWN ��� By Warren Campbell at 10:38 am, Oct 15, 2012 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 tr J W Lj_ Z O W Z V W O v J W 0 Q W N Z O J ABCDEFGHIJKLMNOPQRSTUVWXY & Z abcdefghijklmnopgrstuvwxy & z 1234567890 Helvetica Neue LT Std. 77 Bold Condensed ABCDEFGHIJKLMNOPQRSTUVWXY & Z abcdefghijklmnopgrstuvwxy & z 1234567890 Helvetica Neue LT Std. 67 Med. Condensed 0000 Vail Icons, => + + rendered in LionsHead Welcome Center Dk. Red vVAIL TOWN Of VAIL� Client logos (currently not being used) Customized Icon for Bldg. I.D. rendered in LionsHead Welcome Center material: corten Bldg. Tenant I.D.'s VAIL RECREATION D I S T R I C T Ima �tation nat NAIL RECREATION DISTRICT COMMUNITY PROGRAMMING 0 Approved by the Design Review Board TOWN OF VAIL By Warren Campbell at 10:38 am, Oct 15, 2012 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www :commarts- boulder.com wwwstantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 �J W �Z oW z v o w 0 U J W C Q w y Z O J l Ira L-, ti .0111,144 , j Alr ry tt` 'rill w F�d # - Approved by the Design Review Board TOWN OF VA I L -' By Warren Campbell at 10:39 am, Oct 15, 2012 $tanteC C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W � z O W Z V O W �C G Q J W 0 a W 2 VJ Z O Loc. T Type M Message S.1 1 1. 3.2 ( (Icons: Restrooms, Bus Transit) (New pole) S.2 1 1.1.3 L LIONSHEAD VILLAGE Transit Center S.3 1 1.3.3 ( (Icons: Restrooms, Bus Transit) (Blade mount) S.4 1 1.1.3 L LIONSHEAD VILLAGE Transit Center Loc. T Type M Message S.5 1 1.9 ( (Icon) Interactive Virtual Concierge S.6 3 3.1.1 S Short Term Parking (Icons) Drop -Off, Welcome Center S.7 1 1.2.5 L Lionshead Village Welcome Center Drop -Off & Short Term Parking Only (Arrow) F�d # - Approved by the Design Review Board TOWN OF VA I L -' By Warren Campbell at 10:39 am, Oct 15, 2012 $tanteC C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W � z O W Z V O W �C G Q J W 0 a W 2 VJ Z O -11 5= 1+ I Ks aESrnvDre n A 1.10 3.2.4 11Oir $%1 5 •z 1.3 1.1 1.7 1.2 1.2.4 TENANT , ,> 1.16 1.15 2.1.1 1.17 1.14 2.1.2 1.1 1.4 2.1 1.4 l _ 2.1 ?.2 2.3 1.31 Us 1.30 .2.1 ■ Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 1.10 1 3.2.4 (3) Panels: (Arrow, Info, Restrooms) Changed rr �. ._ �.�. 1 1.12 1 1.3.1 (Icon: Droo -Offl I Deleted 1.14 1.4 p1, Do You Remember... 1.15 2.1.1 3 The Grand View (Icons: Restrooms, Eco Transit) 2 Vail Recreation District EXis MIGL"asN1EAD aA etlracOARAGEi Imagination Station VRD Community Programming 1 Drop -Off Short Term Parking 2.4 2.5 2,6 2.7 23 2.9 2.10 (Icon: Drop -Off) Lobby /Street ,• �, � ;. ,, Lionshead Village (Icons: Info, Restrooms, Lockers, ATM) 5 2.3 In Case of Fire... +� 1.17 2.1.2 (same as 1.15 above) ' ''' raew wi iessrcws 1.18 2.1.2 (same as 1.15 above) 1.19 2.1.1 3 The Grand View (Icons: Restrooms, Eco Transit) 2 Vail Recreation District Imagination Station ' VRD Community Programming _.____ 1 Drop -Off - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Short Term Parking - I (Icon• Drop -Off) ' wonr> ras *rrww t 1.21 r rr2 j - 1.22 1.23 I - I ILI I L< 1.24 Iv®rr ! 1.25 W..Tnroa AREA nu l 1.26 ® - - - =�' 1.27 ® 1.28 1.30 - 1.31 1.32 ®irc:FU,,r: 1.33 1.34 1.35 1.36 1.37 1.38 ^ 1.39 1.40 1.41 1.42 1.43 Approved by the 1' Design Review Board TOWN OF "VAIL"'By Warren Campbell at 10:39 am, Oct 15, 2012 Lobby /Street Lionshead Village (Icons: Info, Restrooms, Lockers, ATM) 2.3 In Case of " 1.3.1 (Icon: Handicap Access) 1.3.1 (Icon: Parking) 1.3.1 (Icon: Elevator) 1.3.1 (Icon: ATM) 2.2 Elevators & ADA Access to Parking, Address 2.2 LHWC, Restrooms, Public Lockers 1.3.2 (1) Panel: (Icon: Elevator) 1.3.5 (Icon: Information) 3.2.1 T Lionshead Village (Icons: Information, Restrooms, Lockers, ATM) 1.4s p1, Do You Remember.... 1.3.4 (1) Panel: (Icon: Information) 1.2.1 Lionshead Village Welcome Center (Icon: Information) 2.2 LHWC 2.3 I� _mum Occupancy 395 1.1.2 Lionshead Village Welcome Center (Icon: Information) 1.3.2 (2) Panels: A (Icons: Restrooms, Lockers) B (Icons: Information, Elevator) 1.5s ELECTRIC ROOM (Braille) 1.5 (Women) WOMEN (Braille) 1.5 (Family) FAMILY (Braille) 1.5 (Men) MEN (Braille) 1.5 (Lockers) Public Lockers 2.2 Restrooms & Public Lockers 1.3.2 (Icons: Restrooms, Lockers) (blade mount) Grayed back signs are not included in this contract. x J W � Z O LU Z V O LU 0 v J W 0 a LU x y z 0 J Loc. .45 TYPe 1.3. Message (Icon- Elevator) 1.46 2.2c (Vail's 50th logo) 1.47 2.2c (Vail's 50th logo) 1.48 1.9 (Icon) Interactive Virtual Concierge 1.49 1.3.1 Round panel (Arrow), square panel (Restrooms) 1.50 4.5 (Map holder) 1.51 4.5 (Map holder) 1.52 2.2c (Vail's 50th logo) 1.53 2.5 Short Term Locker Use Only.... 1.54 2.2c (Vail's 50th logo) Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 1.10 1 3.2.4 (3) Panels: (Arrow, Info, Restrooms) Changed rr �. ._ �.�. 1 1.12 1 1.3.1 (Icon: Droo -Offl I Deleted 1.14 1.4 p1, Do You Remember... 1.15 2.1.1 3 The Grand View (Icons: Restrooms, Eco Transit) 2 Vail Recreation District EXis MIGL"asN1EAD aA etlracOARAGEi Imagination Station VRD Community Programming 1 Drop -Off Short Term Parking 2.4 2.5 2,6 2.7 23 2.9 2.10 (Icon: Drop -Off) Lobby /Street ,• �, � ;. ,, Lionshead Village (Icons: Info, Restrooms, Lockers, ATM) 5 2.3 In Case of Fire... +� 1.17 2.1.2 (same as 1.15 above) ' ''' raew wi iessrcws 1.18 2.1.2 (same as 1.15 above) 1.19 2.1.1 3 The Grand View (Icons: Restrooms, Eco Transit) 2 Vail Recreation District Imagination Station ' VRD Community Programming _.____ 1 Drop -Off - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Short Term Parking - I (Icon• Drop -Off) ' wonr> ras *rrww t 1.21 r rr2 j - 1.22 1.23 I - I ILI I L< 1.24 Iv®rr ! 1.25 W..Tnroa AREA nu l 1.26 ® - - - =�' 1.27 ® 1.28 1.30 - 1.31 1.32 ®irc:FU,,r: 1.33 1.34 1.35 1.36 1.37 1.38 ^ 1.39 1.40 1.41 1.42 1.43 Approved by the 1' Design Review Board TOWN OF "VAIL"'By Warren Campbell at 10:39 am, Oct 15, 2012 Lobby /Street Lionshead Village (Icons: Info, Restrooms, Lockers, ATM) 2.3 In Case of " 1.3.1 (Icon: Handicap Access) 1.3.1 (Icon: Parking) 1.3.1 (Icon: Elevator) 1.3.1 (Icon: ATM) 2.2 Elevators & ADA Access to Parking, Address 2.2 LHWC, Restrooms, Public Lockers 1.3.2 (1) Panel: (Icon: Elevator) 1.3.5 (Icon: Information) 3.2.1 T Lionshead Village (Icons: Information, Restrooms, Lockers, ATM) 1.4s p1, Do You Remember.... 1.3.4 (1) Panel: (Icon: Information) 1.2.1 Lionshead Village Welcome Center (Icon: Information) 2.2 LHWC 2.3 I� _mum Occupancy 395 1.1.2 Lionshead Village Welcome Center (Icon: Information) 1.3.2 (2) Panels: A (Icons: Restrooms, Lockers) B (Icons: Information, Elevator) 1.5s ELECTRIC ROOM (Braille) 1.5 (Women) WOMEN (Braille) 1.5 (Family) FAMILY (Braille) 1.5 (Men) MEN (Braille) 1.5 (Lockers) Public Lockers 2.2 Restrooms & Public Lockers 1.3.2 (Icons: Restrooms, Lockers) (blade mount) Grayed back signs are not included in this contract. x J W � Z O LU Z V O LU 0 v J W 0 a LU x y z 0 J Loc. 1.1 Type 1.7 Message Ulearance 7' -0" (2 units) 1.2 1.2.4 Lionshead Village Welcome Center Drop -Off (icon) Short Term Parking (icon) 1.3 1.5s TBD (Braille) 1.4 1.5s 129 (Braille) 1.5 1.5s 123 (Braille) 1.6 1.5s WATER ENTRY (Braille) 1.7 1.5s ELEVATOR MECHANICAL (Braille) 1.8 1.5s IT (Braille) Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 1.10 1 3.2.4 (3) Panels: (Arrow, Info, Restrooms) Changed rr �. ._ �.�. 1 1.12 1 1.3.1 (Icon: Droo -Offl I Deleted 1.14 1.4 p1, Do You Remember... 1.15 2.1.1 3 The Grand View (Icons: Restrooms, Eco Transit) 2 Vail Recreation District EXis MIGL"asN1EAD aA etlracOARAGEi Imagination Station VRD Community Programming 1 Drop -Off Short Term Parking 2.4 2.5 2,6 2.7 23 2.9 2.10 (Icon: Drop -Off) Lobby /Street ,• �, � ;. ,, Lionshead Village (Icons: Info, Restrooms, Lockers, ATM) 5 2.3 In Case of Fire... +� 1.17 2.1.2 (same as 1.15 above) ' ''' raew wi iessrcws 1.18 2.1.2 (same as 1.15 above) 1.19 2.1.1 3 The Grand View (Icons: Restrooms, Eco Transit) 2 Vail Recreation District Imagination Station ' VRD Community Programming _.____ 1 Drop -Off - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Short Term Parking - I (Icon• Drop -Off) ' wonr> ras *rrww t 1.21 r rr2 j - 1.22 1.23 I - I ILI I L< 1.24 Iv®rr ! 1.25 W..Tnroa AREA nu l 1.26 ® - - - =�' 1.27 ® 1.28 1.30 - 1.31 1.32 ®irc:FU,,r: 1.33 1.34 1.35 1.36 1.37 1.38 ^ 1.39 1.40 1.41 1.42 1.43 Approved by the 1' Design Review Board TOWN OF "VAIL"'By Warren Campbell at 10:39 am, Oct 15, 2012 Lobby /Street Lionshead Village (Icons: Info, Restrooms, Lockers, ATM) 2.3 In Case of " 1.3.1 (Icon: Handicap Access) 1.3.1 (Icon: Parking) 1.3.1 (Icon: Elevator) 1.3.1 (Icon: ATM) 2.2 Elevators & ADA Access to Parking, Address 2.2 LHWC, Restrooms, Public Lockers 1.3.2 (1) Panel: (Icon: Elevator) 1.3.5 (Icon: Information) 3.2.1 T Lionshead Village (Icons: Information, Restrooms, Lockers, ATM) 1.4s p1, Do You Remember.... 1.3.4 (1) Panel: (Icon: Information) 1.2.1 Lionshead Village Welcome Center (Icon: Information) 2.2 LHWC 2.3 I� _mum Occupancy 395 1.1.2 Lionshead Village Welcome Center (Icon: Information) 1.3.2 (2) Panels: A (Icons: Restrooms, Lockers) B (Icons: Information, Elevator) 1.5s ELECTRIC ROOM (Braille) 1.5 (Women) WOMEN (Braille) 1.5 (Family) FAMILY (Braille) 1.5 (Men) MEN (Braille) 1.5 (Lockers) Public Lockers 2.2 Restrooms & Public Lockers 1.3.2 (Icons: Restrooms, Lockers) (blade mount) Grayed back signs are not included in this contract. x J W � Z O LU Z V O LU 0 v J W 0 a LU x y z 0 J 2.1 3.2.1 T The Grand View Stantec (Icons: Eco Transit, Restrooms) 4 Vail Recreation District C commarts Imagination Station 1112 Pearl Street Boulder, CO 80302 VRD Community Programming TEL 303.447.8202 FAX 303.440.7069 2.2 1.4s p2 www.commarts- boulder.com 2.3 3.2.1 F Vail Recreation District www.stantec.com Imagination Station 11F_,T VRD Community Programming BLDG. SIGNAGE & GRAPHICS V Lionshead Village Design Intent (Icons: Information, ATM, 4 October, 2012 Restrooms, Lockers) 2.4 1.4s p2, Do You Rememeber.... 2.5 3.2.1 T (Icon: Elevator) Lionshead Village J w (Icons: Information, ATM, Restrooms, Lockers) z 2.6 1.4s p2, Do You Remember... o w ' Deli" 2.8 1.4 p2, Do You Remember... z 2.9 2.1.1 p3 The Grand View o w A - (Icons: Restrooms, Eco Transit) � - - - - - - p2 Vail Recreation District ( 1 J l 2.1 ' if 2.2 + 2.3 i 2 4 2.51 2 6 2 7 2 8 2.9 I 2.10 Imagination Station CD IT I - - IV P• IT : I0 in - I- a a e 4T 11 IT, r R 14r It VRD Community Programming c) p1 Drop -Off -J Short Term Parking W Lobby /Street Off) t� Lionshead Village v (Icons: Info, Restrooms, Lockers, ATM) Q 2.3 In Case ol ire... ly 1.5s MECHANICAL (Braille) _ 2.12 1.2.2 Vail Recreation District AIM Imagination Station y _ Z � _ VRD Community Programming _ _ - - z AQU T5 1RY1'& CHI I REN•B- - _ - - - -- - _ - 2.14 2.4 (Changeable Message Area) J r 2.15 2.2 (TBD, Hr.s of Operation) C _ s - 2.16 1.5s 204 (Braille) trvr�,j . . -' 2.17 1.5s 203 Mad Scientist Lab - 2.18 1.5s 205 (Braille) cy2.19 1.5s 206 (Braille) -1 2.20 1.5 (Restroom) UNISEX ADULT (Braille) ncl au+aN JANCLwE -r 4�7_ 2.21 1.5 (Restroom) UNISEX CHILDREN (Braille) 5''11,710' - �" 2.22 1.5s 210 (Braille) / 2.23 1.5s MECHANICAL (Braille) 2.24 1.5s STAIR (Braille) These drawing, express visual design intent only Final uRnrAMPEra JN % 2.25 2.3 Maximum Occupancy 41 mpneening, rnaterials and fatericalion shall remain the Z"1 I Grua S 1 iif9r. 91 7a1 - ' a' I -` - - _ - - - - - - - - -- - - -- - P - Grayed back signs are not included in this ' Vail Welcome Center Town of contract. PROJECT - p %• !i L , I II , L T �. �� Greg Hall, Town of Vail CLIENT CONTACT TEAM 12, Location Plan Level 2 '1 4 Approved by the Design Review Board TOWN OF VA I L " By Warren Campbell at 10:39 am, Oct 15, 2012 i E -1 E -2 _ E-4 E -5 E- nalo +pd 1.4 Grayed back signs are not included in this contract. i'I { E —F I, — �– AA I i w' BB JILEVEL 03 sr'A.IF ,U =ro^ 0 1 Approved by the Design Review Board TOWN OF UAL I L l By Warren Campbell at 10:39 am, Oct 15, 2012 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 301440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W LL_ z O LU Z � O LJ 0 v J W O W 2 y Z O J 1.3.2 (Icons: Elevator, Restrooms, Information) 2.3 in Case of Fire... 2.1.1 p3 The Grand View (Icons: Restrooms, Eco Transit) p2 Vail Recreation District Imagination Station VRD Community Programming p1 Drop -Off Short Term Parking (Icon: Drop -Off) Lobby /Street Lionshead Village (lr.nns• Infn Restrnnms I nr.kers ATM) 1.4 p3, Do You Remember... 1.2.3 The Grand View 1.3.1s (Icon: Restrooms) 2.4 (Changeable Message Area) 1.5 (Women) WOMEN (Braille 1 1.5 (Men) MEN (Braille) ! 2.2 The Grand View (Phone No.? web link ?) i 2.3 Maximum Occupancy 276 4 2.3 Maximum Occupancy 36 i 1.5s STAIR (Braille) Grayed back signs are not included in this contract. i'I { E —F I, — �– AA I i w' BB JILEVEL 03 sr'A.IF ,U =ro^ 0 1 Approved by the Design Review Board TOWN OF UAL I L l By Warren Campbell at 10:39 am, Oct 15, 2012 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 301440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W LL_ z O LU Z � O LJ 0 v J W O W 2 y Z O J e- r' I� �dC er Al. b? d3 al.H '"!l of" 1 Vw, iic, Itil t Flat mount Existing post mount Entry I.D. Level I.D. Entry I.D. Project Entry I.D. Existing post mount Blade Facility I.D. Pedestrian Directional Pedestrian Directional South Entry 1 South Entry 1 South Entry 2 South Entry 3 Facility I.D. South Entry 4 and Small Level I.D. Sign Type 3.2.4 Facility I.D. All levels, East side Facility I.D. Facility I.D. Sign Type 1.3.4 Facility I.D. Sign Types Sign Type 1.3.1 Sign Type 1.4 Sign Type 1.3.1 Sign Type 1.2.1 Sign Type 1.3.2 3.2.1 & 1.4s Approved by the Design Review Board TOWN OF VA I L �/ By Warren Campbell at 10:39 am, Oct 15, 2012 ,4 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 M J W W Z O W Z V O W O V J W a W y Z O J i I �� s• F r i I .a. Elevation 1 SCALE: 1/2 " =1' -0" z� Photo Composite SCALE:NTS f--- Existing sconce fixtures Bottom edge of concrete garage structure 1/4" Thick plate stock sign panel. Panel has flush backer frame of 2" angle stock. 3" Fabricated cabinet at top, enclosed at sides, and open bottom face, houses LED illumination (Winona Winline LED 103W') to wash front face, top to bottom. If multiple fixtures are required, hot or dark spots are not acceptable. Entire assembly painted MA (Corten) color. Face has cut -out 1/4" plate metal letters, painted P.4 (White). Letters are mechanically fastened to sign panel. Sign panel is pinned 1/2" off wall surface by 2" Dia. cylinder clad studs on rear face, no visible fasteners on face. Information icon mounted to wall adjacent to sign assembly. 1/4" plate stock face painted MA (Corten) color is separated from 2" thick fabricated rear cabinet, painted to match, by a 1/2" thick layer of M.2 (acrylic with frosted finish returns). LED illumination inside cabinet provides an edge glow through acrylic. All conduit is to be concealed behind stone veneer. Venner to be replaced after installation. Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construc- Approved by the tion details to ensure appropriate anchor connections. http: / /www.winonalighting.com /products/ Design Review Board wnona_ led /led linear /103w TOWN OF VAIL I By Warren Campbell at 10:39 am, Oct 15, 2012 Cabinet at top, LED fixture within. Fixture as far away from surface as possible Letters fastened to face Cylinder clad studs. Cylinders ground to fit stone surface Stone wall surface See Arch. Dwg's for specific construction details Stone veneer of wall to be patched appropri- ately after installation section SCALE: 3 " =1' -0" 2" J11-' Stantec Co commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W z J O LU Z V O LU O C� J W O Q W x CA z O J y Photo Composite Sign Type 1.3.3 SCALE: NTS Single Pole mount blade icons South Elevation AM Photo Composite SCALE: NTS North Elevation Sign Type 1.3.2 Wall mount blade icons 1/4" Thick plate stock sign panel. Panel has flush backer frame of 2" angle stock. 3" Fabricated cabinet at top, enclosed at sides, and open bottom face, houses LED illumination (Winona Winline LED 103W ") to wash front face, top to bottom. If multiple fixtures are required, hot or dark spots are not acceptable. to wash front face, top to bottom. Entire assembly painted M.1 (Corten) color. Face has cut -out 1/4" plate metal letters, painted P.4 (White). Letters are mechanically fastened to sign panel. Sign panel is pinned 1/2" off wall surface by 2" Dia. cylinder clad studs on rear face, no visible fasteners on face. Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. " http: / /www.winonalighting.com /products/ Winona led /led linear /103w A Elevation Approved by the Waff SCALE: 1/2 " =V -0° Design Review Board TOWN OF VA i L 11 By Warren Campbell at 10:39 am, Oct 15, 2012 Stantec Co commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.com marts -bou Id a r.co m www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W z J O LU Z V O LU F� O C� J W O Q W CA Z O J J . Se ontlary 1. D1_ South Entry 1 -4*40. Key Plan" South Entry2- -I - Perspective SCALE: NTS I AIM Photo Composite SCALE: NTS , Framed Sign 1/4" Thick plate stock sign panel. Panel has flush backer frame of 3" angle stock. 4 1/2" Fabricated �' 214 cabinet at top, enclosed at sides, and open at - -° 11 61. - =±� bottom, houses LED illumination (Winona Winline` El El LED 103W`) to wash front face, top to bottom. If multiple fixtures are required, hot or dark spots are not acceptable.to wash front face, top to bottom. Sign to align with ii&14DI Entire assembly painted M.1 (Corten) color. w Sign to align with T -` �- mullions in window 1 mullions in window 1 - beyond. ti Face has cut-out 1/2" plate metal letters, painted P.4 beyond. (White). Letters are mechanically fastened to sign panel. 6-8" - — Sign panel is suspended from canopy surface by (3) 3" square tube stock supports and 1/2" thick base plate. Supports "pierce" top of frame and connect to a lateral support member. Entire support assembly — painted P.3 (Black). - Fabricated Icon o Information icon suspended adjacent to sign panel. o a T n 1/4" plate stock face painted M.1 (Corten) color is T separated from 3" thick fabricated rear cabinet, - — V painted to match, by a 1/2" thick layer of M.2 (acrylic with frosted finish returns). LED illumination inside cabinet provides an edge glow through acrylic. Icon base plate wraps canopy arm members. Elevation Detail SCALE: 1/4 " =1' -0" 6' -8" 2' -0" South Entry 3 Plan Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing canopy construction details to ensure appropriate anchor connections. http: / /www.winonalighting.com /products/ wi n o n a_I ed /I a d_I i n ea r /103w Approved by the 0 ' Design Review Board TOWN OF VAI L By Warren Campbell at 10:39 am, Oct 15, 2012 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 W Q H � Z O W Z V C= w F� CD C) J W O Q W CrJ Z C7 A Elevation Detail— SCALE: 3/4 " =1' -0' 0 Sign is centered between canopy arms, icon is suspended below right pair of arms. Both align laterally. SCALE:NTS 2' -a" r 1' -9" 3" o ° ° Rear view of framed sign panel i T µ 6' -8" N UONSHEAD VI LLAGE 6' -8" V N_ O Plan 0 0 0 0 1- 2' -0" N C VIF 1 y O N O W Approved by the Design Review Board TOWN OF VA I 6�5 B y Warren Campbell at 10:40 am, Oct 15, 2012 AM Sections Vo SCALE:1 1/2 " =1'4 Sign Section Canopy underside Base plate Support arm Boxed -in lateral support member on rear surface echoes light box on front. Section O O O Light box Canopy arm underside Lateral structure Corten face member Lateral structure Support arm member i i I Fabricated icon cabinet i I i i >— Letters on face I Plate sign face Angle stock frame i i Icon Section F Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commart8-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W Q � Z J O W Z V C w CO c..s J W O Q W z O Il �N- Photo Composite SCALE: NTS Power access from Mechanical room Sign positioned to clear door swing. A Elevation Detail MAW SCALE: 1/4 " =1' -0" Level 2 North Entry 1 2 -- IM tlevanon VAP SCALE: 1' =1' -0" Cabinet at top, LED fixture within Masked and enamel painted graphics on face panel Angle stock backer frame Cylinder clad studs. Cylinders ground to fit stone surface Stone wall surface See Arch. Dwg's for specific construction details Stone veneer of wall to be patched appropri- ately after installation Sect 1/4" Thick plate stock sign panel. Panel has flush backer frame of 2" angle stock. 3" Fabricated cabinet at top, enclosed at sides, and open bottom face, houses LED illumination (Winona Winline LED 103W ") to wash front face, top to bottom. Entire assembly painted MA (Corten) color. Face has 2 -color masked and painted graphics, color P.4 (White) with color P.3 (Black) drop shadow. (Note- drop shadow outlines to include the overprinting white shapes, so there is no offset edge under the white). Sign panel is pinned 1/2" off wall surface by 2" Dia. cylinder clad studs on rear face, no visible fasteners on face. Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. http: / /www.winonalighting.com /products/ wnona led /led linear /103w Approved by the Design Review Board TOWN OF VA I L By Warren Campbell at 10:40 am, Oct 15, 2012 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 W z O W z v C w CD t— C-) J W 0 W x CrJ z G Key Plan Sign Type 1.3.1s Photo Composite -- SCALE: NTS - Level 3 North Entry I Power access in JC Plan 1/4" Thick plate stock sign panel. Panel has flush backer frame of 2" angle stock. 3" Fabricated cabinet at top, enclosed at sides, and open bottom face, houses LED illumina- tion (Winona Winline LED 103W ") to wash front face, top to bottom. Entire assembly painted M.1 (Corten) color. Face has 2 -color masked and painted graphics, color P.4 (White) with color P.3 (Black) drop shadow. (Note- drop shadow outlines to include the overprinting white shapes, so there is no offset edge under the white). Sign panel is pinned 1/2" off wood wall surface by 2" Dia. cylinder clad studs on -, rear face, no visible fasteners on face. Elevation Fabricator to review applicable Architectural Drawings (available on line from Owner) for SCALE: 1 " =1' -0" existing wall construction details to ensure appropriate anchor connections. http: / /www.winonalighting.com /products/ 4' -2" I T � - T Elevation Detail SCALE: 1/4 " =1' -0" Level 3 North Entry —1 III I Approved by the Design Review Board TOWN OF VA I It By Warren Campbell at 10:40 am, Oct 15, 2012 o III 1/2" Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W Q 1-- z O W z v O W I— 0 Q) J W 0 W z 0 J �_a 1 E,51_iA. 0111] k Key Plan Two lays to front I� Aft Elevation Detail SCALE: 1/4"=1' -0" West Garage Entry Short Term Pal R N T ENTER a Photo Composite SCALE:NTS 11rij i 'r �t 777 Sign Type 1.7 Clearance I.D. J!� t Approved by the Design Review Board TOWN OF WAIL " By Warren Campbell at 10:40 am, Oct 15, 2012 AM Elevation SCALE: 3/4 " =1' -0" Information Panel • w, j� MEAD VILLAGE Y Welcome Center 1/4" Thick plate stock sign panel. Panel has flush backer frame of 3" angle stock. Entire assembly painted MA (Corten) color. Sign panel is externally illuminated by existing light fixture above. Face has cut -out 1/4" plate metal letters, painted P.4 (White). Letters are mechanically fastened to sign panel. Sign panel is fastened to wall surface by 2" Dia. cylinder clad studs on rear face, no visible fasteners on face. Information icon mounted to wall adjacent to sign assembly. 3/8" plate stock face painted MA (Corten) color is separated from 3" thick fabricated rear cabinet, painted to match, by a 3/4" thick layer of M.2 (acrylic with frosted finish returns). LED illumination inside cabinet provides an edge glow through acrylic. 1/2" Plate stock sign panel pinned off curved entry lintel. Channel stock tracks hold (2) changeable message panels, all painted P.3 (Black). 2 -Layer icon panels mechanically fastened to sign panel at right, front layer painted P.1 (Dk. Lionshead Red), rear layer painted P.3 (Black). Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing entry construction details to ensure appropriate anchor connections. A Drop Off 6nly �� Short Term Parking Channel Changeable 2 -Layer S M U ri Stantec C commarts 1112 Pearl Street Boulder, CC 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 cc w LA_ z O W Z C� O w O V J W G a W CD2 h z n � n c o C7 Plan 4, 8' -8° Total Drop -Off & ° °...... nle� Short Term Parking Only , Center © -OL— I' i message TOWN OF HAIL 11" Collars 10" Posts 0" ` 4" Light ve Li ht Cove Ia--? 2" Thick fabricated sign cabinet with 1/4" plate stock faces. 4" Fabricated light coves at top, both sides, enclosed at sides, and open bottom face, houses LED illumination (Winona Winline LED 103W ") to wash front face, top to bottom. If multiple fixtures are required, hot or dark spots are not acceptable. Entire assembly painted MA (Corten) color. Sign face has cut -out 1/4" plate metal letters, painted P.4 (White). Letters are mechanically fastened to sign panel. Face has 1/2" thick plate stock icon disk, painted P.4 (White) with 1/4" cut out arrow, painted P.3 (Black), both mechanically fastened. All white graphics to have M (Reflective White vinyl) faces. Sign cabinet supported by (3) 2" square connection blocks. Connection blocks connect to 1/2" plate stock collars that wrap wood posts. Connection blocks and collars painted P.3 (Black). Approved by the Design Review Board By Warren Campbell at 10:40 ail,, %.LL 1 1 posts. Species and finish to match those on building (M). i protection from elelments as required for conditions. le Architectural Drawings (available on line from Owner) for etails to ensure appropriate anchor connections. com /products/ Light fixture caisson Stone pedestal wall terminus +N�cl���I�ittrr� ti` , �Ia - Y`/Z.% Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 W Q � � z O W Z V C= W CD C.) ' J W z G Iii 0 W z G Iii Se,oncJary Projectil.D. South Entry 1 t South Entry 4 Key Plan South Entry _ - South Elgtry 3 0 0 - f�� IJ 0 0 l i 1 ;rrf I I � E� Elevation Detail SCALE: 1/4 " =1' -0" South Entry 1 Sign Type 1.4 Approved by the Level I.D. Design Review Board TOWN OF VAIL 1 By Warren Campbell at 10:40 am, Oct 15, 2012 Elevation SCALE: 1 " =1' -0" L - ver�, r _ F !.' Photo Composite SCALE:NTS II N1/4" Plate stock icon panel inset faces, painted P.1 (Dk. Lionshead Red). Inset faces fastened to rear faces with exposed vandal resistant fasteners, painted to match field. 1/4" Rear face and 1 1/2" flush angle stock backer frame painted P.3 (Black). Icon graphics are masked and painted P.4 (White). Icon assemblies individually pinned 1 1/2" apart and 1/2" off stone surface with 2" Dia. cylinder clad studs, (2) per panel, painted P.3 (Black). Cylinders ground as required to fit stone. Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. o_-(- '1 _2, 4 Oct Change 111/x; Rear face R= 2 5/8" It N Inset face R= 2" yT N Section 1/4" 0 $talltec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W W Z O W Z V O WW G 0 v J W D Q W 2 VJ Z O Seondary Projectil.D. South" Entry 1 1W t Key Plan South Entry 2 South Entry 3 r Elevation Detail SCALE: 1/4 " =1' -0" South Entry 2 TOWN OF VAIL South Entry 4 Approved by the Design Review Board A Elevation By Warren Campbell at 10:40 am, Oct 15, SCALE: 1 ° =1' -0° r tl 1/4" Plate stock icon Stantec �- . commarts panel inset faces, painted PA (Dk. Lionshead 1112 Pearl Street Boulder, CO 80302 Y 1,� TEL 303.447.8202 stock backer frame painted P.3 (Black). •c - -_� —� FAX 303.440.7069 www.commarts- boulder.com ` -" - wwwstantec.com 1/2" off stone surface with 2" Dia. cylinder clad studs, (2) per panel, painted P.3 (Black). BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 r W j ~ � Z O W Z V C W - — J LU 0 _ Q W CrJ Z G 2" iTotal Width 1/4"1/4" i11/2" /2" sear face R= 2 5/8" nset face R= 2" w N v 1 Section 1/4" Plate stock icon panel inset faces, painted PA (Dk. Lionshead Red). Inset faces fastened to rear face with exposed vandal resistant fasteners, painted to ICI match field. 1/4" Rear face and 1 1/2" flush angle stock backer frame painted P.3 (Black). Icon graphics are masked and painted P.3 (White). Icon assemblies individually pinned 1 1/2" apart Iand 1/2" off stone surface with 2" Dia. cylinder clad studs, (2) per panel, painted P.3 (Black). Cylinders ground as required to fit stone. Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. W j ~ � Z O W Z V C W - — J LU 0 _ Q W CrJ Z G 2" iTotal Width 1/4"1/4" i11/2" /2" sear face R= 2 5/8" nset face R= 2" w N v 1 Section II y N i i II A Photo Comoosite SCALE:NTS !1 1 1/2" 10" 1/4" 1/4" 1/2" 0 A Elevation SCALE: 1 " =1' -0" Section 1.3.1s Is a smaller version of Sign Type 1.3.1 1/4" Plate stock icon panel inset faces, painted P.1 (Dk. Lionshead Red). Inset faces fastened to rear facew with exposed vandal resistant fasteners, painted to match field. 1/4" Rear face and 1 1/2" flush angle stock backer frame painted P.3 (Black). Icon graphics are masked and painted P.4 (White). Icon assembly pinned 1/2" off stone surface with 2" Dia. cylinder clad studs, (2) per panel, painted P.3 (Black). Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. Elevation Detail MAW SCALE: 3/8 " =1' -0" 3rd Level North Entry r A n with top of Sign Type 1.2.3, Grand Approved by the Design Review Board T ���� By Warren Campbell at 10:41 am, Oct 15, 2012 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W � z O W z v O W 0 v J W D W 2 VJ Z O r Key Plan" IY I A Side Elevation SCALE: 1/4"= V-0" South Entry 3 M Ar r t;{ 11 ; 1' 2" 112" N ET Photo Composite SCALE:NTS A Elevation { SCALE: 1/4 ° =1' -0" Approved by the Design Review Board TOWN OF VA J U By Warren Campbell at 10:41 am, Oct 15, 2012 i \ Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 W Z O W Z V C= w F� CD C) J W O Q W S CrJ Z C7 2 -Sided cabinet construction blade mount icon sign. 3" Thick fabricated icon shapes are supported by 6" high bracket arms, same thickness to 1/2" thick mounting plate. Mounting Plate to match height of icon(s). Entire assembly painted P.3 i (Black). Sign fastened to stone wall surface with exposed 3/4" hex head fasteners, painted to match field. N N Both faces of icon shapes have inset 1/4" plate stock panels, painted P.1 (Dk. N Lionshead Red). Inset faces fastened to — rear facew with exposed countersunk I vandal resistant fasteners, painted to match field. l a y Faces of inset panels have masked and = enamel painted graphics, P.4 (White). Fabricator to review applicable Architec- tural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. 11 ; 1' 2" 112" N ET Photo Composite SCALE:NTS A Elevation { SCALE: 1/4 ° =1' -0" Approved by the Design Review Board TOWN OF VA J U By Warren Campbell at 10:41 am, Oct 15, 2012 i \ Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 W Z O W Z V C= w F� CD C) J W O Q W S CrJ Z C7 , %�7 Key Plan' �9 lie Elevation Detail SCALE: 1/4"= V-0` Level 3 Northeast Elev. MEN&U Photo Composite SCALE:NTS 2 -Sided cabinet construction blade mount icon sign. 3" Thick fabricated icon shapes are supported by 6" high bracket arms, same thickness to 1/2" thick mounting plate. Mounting Plate to match height of icon(s). Entire assembly painted P.3 (Black). Sign fastened to stone wall surface with exposed 3/4" hex head fasteners, painted to match field. Both faces of icon shapes have inset 1/4" plate Side Elevation stock panels, painted PA (Dk. Lionshead Red). Inset faces fastened to rear faces with exposed vandal resistant fasteners, painted to match field. Faces of inset panels have masked and enamel j painted graphics, P.4 (White). Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing canopy construction details to ensure appropriate anchor connections. Approved by the Design Review Board TOWN OF VAI A By Warren Campbell at 10:41 am, Oct 15, 2012 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W W Z O LU Z C..) �S O LU O V J W D a W 2 C/0 Z O J 6" I- Header wall to have wood trim at bottom, code requ'd EXIT sign and access panel for fireplace damper. Key Plan" - _ * Sign assembly to fasten to side of fireplace e B ENEER O D SOLID,TYP IREPLACE AND CHIMNEY. U.N.O. (ST -01) t N N Ui N OPEN TO HALL BEYOND GAS SHUT -OFF VALVE MOUNTED ON NORTH FACE OF STONE WALL @ RETURN, 4' -0" A.F.F. STONE WALL TILE SURROUND E� Elevation Detail (ST-03) SCALE: 3/S " =1' -0" Level 1 East Interior Elevation f A812 tit� O i N Cn N Side Elevation 1 I HERRING RC STONE VENEER (ST -01) Approved by the #5 BORDEAU STAIN Design Review Board TOWN OF VA I L " By Warren Campbell at 10:41 am, Oct 15, 2012 2 -Sided cabinet construction blade mount icon sign. 3" Thick fabricated icon shapes are supported by 6" high bracket arms, same thickness to 1/2" thick mounting plate. Mounting Plate to match height of icon(s). Entire assembly painted P.3 (Black). Both faces of icon shapes have inset 1/4" plate stock panels, painted PA (Dk. Lionshead Red). Inset faces fastened to rear shapes with exposed countersunk vandal resistant fasteners, painted to match field. Faces of inset panels have masked and enamel painted graphics, P.4 (White). Fabricator to review applicable Architec- tural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. I BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W � z O LLI Z V O L►J O U J W C Q W y Z O J Stantec Co commarts Pearl Street Boulder, CO 50302 r . TEL TEL 303.447.5202 FAX 303.440.7069 www.comma ts- boulder.com wwwstantec.com tit� O i N Cn N Side Elevation 1 I HERRING RC STONE VENEER (ST -01) Approved by the #5 BORDEAU STAIN Design Review Board TOWN OF VA I L " By Warren Campbell at 10:41 am, Oct 15, 2012 2 -Sided cabinet construction blade mount icon sign. 3" Thick fabricated icon shapes are supported by 6" high bracket arms, same thickness to 1/2" thick mounting plate. Mounting Plate to match height of icon(s). Entire assembly painted P.3 (Black). Both faces of icon shapes have inset 1/4" plate stock panels, painted PA (Dk. Lionshead Red). Inset faces fastened to rear shapes with exposed countersunk vandal resistant fasteners, painted to match field. Faces of inset panels have masked and enamel painted graphics, P.4 (White). Fabricator to review applicable Architec- tural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. I BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W � z O LLI Z V O L►J O U J W C Q W y Z O J n Photo composite Vp SCALE:NTS Transit Center, South Elevation "— -. - _ l 2 -Sided cabinet construction icon signs fastened to a clustered pole assembly. 3" Thick fabricated icon shapes are supported by 10" high bracket arms, same thickness that fasten between the members of the clustered pole assembly. Entire assembly painted P.3 (Black). Both faces of icon shapes have inset 1/4" plate stock panels, secured with mechanical fasteners, painted P.1 (Dk. Lionshead Red). Faces of inset panels have masked and enamel painted graphics, P.4 (White). (4) or (1) Tapering poles, painted P.3 (Black) secured together by (4) 1/4" plate stock bands, painted P.2 (Lionshead Anthracite). Second band from the bottom has cut -out 1/4" logo backer plate, painted P.3 (Black), with 1/4" raised logo, P.2 (Lionshead Anthracite), 2- sides. Domed cap at top. Precast colored concrete base. Ordinarily, a 14' pole mount assembly would look like this. The particular location where Approved by the this sign occurs has a concrete abuttment, Design Review Board requiring a "sawed-off" variation, at right. TOWN OF UA h L By Warren Campbell at 10:41 am, Oct 15, 2012 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W Q H J Z C= W Z C, C= w CD F� C) J W O w = Q W N � Z N Mi O Elevation "Sawed -oft' variation at SCALE: 3/8 " =1 -0" Transit Center A Elevation SCALE: 1/2" = 1 -0" Sign Type 1.3.4x Existing Post Blade Mount Facility I.D. i i 2 -Sided cabinet construction icon signs fastened to existing posts. 3" Thick fabricated icon shapes are supported by 10" high bracket arms, same thickness that fasten to a compression cuff that secures to pole. Entire assembly painted P.3 (Black). In each case, pole Dia. will vary, VIF each location for compression cuff. Both faces of icon shapes have inset 1/4" plate stock panels, secured with mechanical fasteners, painted P.1 (Dk. Lionshead Red). Faces of inset panels have masked and enamel painted graphics, P.4 (White). Approved by the Design Review Board TO WN 0 f tVAILBy Warren Campbell at 10:41 am, Oct 15, 2012 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts - boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W Lj— Z O W Z V O LU O C) J W D a W S COD Z O J Elevation Detail SCALE: 3/8 " =1' -0" Level 1 East Interior Elevation 14" Plate stock icon panel inset faces, painted P.1 (Dk. Lionshead Red). Inset faces fastened to rear faces with exposed countersunk vandal resistant fasteners, painted to match field. 1/4" rear face and 2" flush angle stock backer frame, painted P.3 (Black). Icon graphics are masked and painted P.4 (White). Icon assemblies individually pinned 1/2" off stone surface with 2" Dia. cylinder clad studs, (2) per panel, painted P.3 (Black). Cylinders ground as required to fit stone. Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. Approved by the Design Review Board TOWN OF VAIL By Warren Campbell at 10:41 am, Oct 15, 2012 Signs located inside the garage, viewed when exiting the garages, o 6 0 Q�Q include the `Do you Remem- dj ber.... "message. V 6a 0 a D e` Signs located on the exterior of the garages, viewed from the street, do not include that message. (This variation is currently used only at the D Vail Village parking structure) DV 1' -10" A Elevation SCALE: 1 1/2-= 1 -0" A Photo Composite Sign Type 1.3.1 Sign Type 1.4.1 SCALE:NTS Facility I.D. Level I.D. Section $talltec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W W Z O W z v O ty I� 0 v J W D W 2 t%J Z O A Photo Composite SCALE:NTS Drop -Off Area, Level 1 1 Entry Milli Elevation SCALE: 1 "= V -0" fP2 LionsHead Village welcome cemer ®®tj® r• 10" P2 F Vail Recreation District Imagination Station VRO community Rogmmming N LionsHead Village welcome cemer r 1/4" 1/41 ' 112" o Section ��W K The Grand View Transit center 319 N LionsHead Village welcome cemer B ®® A Photo Composite SCALE:NTS Level 2 Core Entry When this sign type appears as a modifier to another sign (Sign Type 3.2.3), this smaller size is to be used: 10 ". 1/4" Plate stock icon panel inset faces, painted P.1 (Dk. Lionshead Red). Inset faces fastened to rear faces with countersunk vandal reistant fasteners, painted to match field. 1/4" Rear face and 1 1/2" flush angle stock backer frame painted P.3 (Black). Backer frame is to be notched to accept the sign below. Icon graphics are masked and painted P.4 (White). Icon assemblies individually pinned 1/2" off stone surface with 2" Dia. cylinder clad studs, (2) per panel, painted P.3 (Black). Cylinders ground as required to fit stone. Fabricator to review applicable Architectural Drawings (available on line from Owner) for existing wall construction details to ensure appropriate anchor connections. See note at right A Photo Composite SCALE:NTS Level 2 Stair Elevation Detail VJF SCALE: 3/8 ° =r -1 Approved by the Design Review Board TOWN OF UA j L By Warren Campbell at 10:42 am, Oct 15, 2012 a 'A Yes Y s Backer frame is to be notched to accept the sign below. Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W j I-- W Z O W O w f— O J W W4 LU I'— ►- �— J Vail R creation District Lionstlead Village jillp These drawings express visual design intent only. Final engineering, materials and fabrication shall remain the responsibility of the fabricator. tr- ., I rte' 11 Signs viewed when exiting the garages include the "Do you Remember...... message. Signs located on the exterior of the garages, viewed from the street, do not include that message. r = .J 6,' - Sign Type 1.2.4 Garage Entry I.D. Elevation Detail SCALE: 1/4" =V-0" West Elevation It"k 8' -0" -*"W— Aft Photo Composite SCALE:NTS _ B z# LIONSHEAD VILLAGE Welco �e to . iii,. I I 4 IIII !!UT1, I Ike -ii T1l.lAfI 4" Dia. thin wall aluminum tube suspended fron — 1/8" braided stainless steel aircraft cable. Tube is painted P.1 (Dk Lionshead Red) vinyl and graphics are V.1 (Reflective White). 1 ! � r Approved by the Design Review Board TOWN OF VAIL A By Warren Campbell at 10:42 am, Oct 15, 2012 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W W z O W Z V O ,y O V J W D Q W 2 VJ z O A Elevation Detail SCALE: 3/8 " =1' -0° 2nd Surface Vinyl Graphics 1/4" Plate metal sign backer panel pinned 1/4" off (smooth) wall surface. Panel has M.1 (Corten) finish, specific floor band painted P.1 (Dk. Lionshead Red). Returns painted P.1 (Dk. Lionshead Red) or M.1 (Corten), depending upon its adjacent face color. 1/4" x 11/2" Attachment straps at top and bottom. Straps painted P.3 (Black). 1/2" Dia. vandal resistant head fasteners, painted to match field. Attachment straps secure .060 non -glare acrylic sheet, same size as sign backer panel. Acrylic has second surface graphics, V.3 (Matte White). N m A Photo Composite SCALE: NTS 1' -6" Street Level A Layouts SCALE: 1 " =1' -0" P3 P2 Garage Level 1 P3 LPJ 4* Level 2 Level 3 Approved by the Design Review Board TOXIN OF VAIL By Warren Campbell at 10:43 am, Oct 15, 2012 Section Stantec Co commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.com marts - boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 tr J W Z LL O W Z C3 O ry F� O V J W O a W S Ch Z O J A Elevation Detail Vp SCALE: 3/8 " =1' -0" 2nd Surface Vinyl Graphics 1/4" Plate aluminum sign backer panel adhered (mechanically fastened if possible) to cab wall surface. Panel painted P.1 (Dk. Lionshead Red), Returns painted P.1 (Dk. Lionshead Red) or P.3 (Black), depending upon its adjacent face color. 1/4" x 1" Attachment straps at top and bottom. Straps painted P.3 (Black). 1/2" Dia. vandal resistant head fasteners, painted to match field. Attachment straps secure .060 non -glare acrylic sheet, same size as sign backer panel. Acrylic has second surface graphics, V.3 (Matte White). kl� Approved by the Design Review Board T► VAIL A By Warren Campbell at 10:43 am, Oct 15, 2012 A Elevation SCALE: Half Size 10" 1" I. A Photo Composite SCALE:NTS Section Vandal resistant fasteners 1/8" Attachment strap .060 Non -glare acrylic, 2nd surface vinyl graphics 1/4" Backer panel Cab wall surface 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W W Z O W Z V O W O V J W D W 2 VJ Z 0 -- 3rd Level North ()Vestibule Entry 0 South Entry 3 South Entry 4 South Entry 2:' Diagrammatic Key Plan Messages to be second surface machin vinyl, V.3 (Frosted Crystal). Messages in Sign Package typeface are replace any existing messages. A Elevation Currently reads: SCALE: 3/8 " =1' -0" South Entry 3 Street Level Primary Entry Elevation South Entry 2 ( "Cat Door ") Street Level Elevator Lobby A Elevation SCALE: 3/8 " =1' -0" South Entry 4 Street Level Restroom Entry Currently reads: Approved by the Design Review Board TOWN OF VAIL A By Warren Campbell at 10:44 am, Oct 15, 2012 tly reads: Elevators & ADA Access Enter Here ttic door decal i N r I flax Sx EAx Vi I. LA. Welcome enter estroom Locker A Elevation MAW SCALE: 3/8 " =1' -0" South Enl 2 Vestibule Entry A Elevation SCALE: 3/8 " =1' -0" North Entry, 3rd Level Vestibule Entry 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W W- C= W Z V O W 0 v J W Q W S c/o Z O 7 3r Level North ()Vestibule Entry 0 South Entry 3 South Entry 4 South Entry 2:' Diagrammatic Key Plan Temporary logo decals applied to all glass entry doors: street level and Grand View room. A Elevation SCALE: 3/8 " =1' -0" South Entry 3 Street Level Primary Entry Elevation South Entry 2 ( "Cat Door ") Street Level Elevator Lobby A Elevation SCALE: 3/8 " =1' -0" South Entry 4 Street Level Restroom Entry k1 Approved by the Design Review Board �►►�� A By Warren Campbell at 10:44 am, Oct 15, 2012 I full color digitally logo on white vinyl second surface A Elevation MAW SCALE: -0" South Enl 2 ntr' Vestibule Entry VAI L 19 2O12 A Elevation SCALE: 3/8 " =1' -0" North Entry, 3rd Level Vestibule Entry 0 Stantec Co. commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W W- C= W Z V O W O V J W v W S c/o Z O Sign Type 1.2.4 - Threshold Sign (not visible here) Sign Type 1.2.5 - Freestanding Sign r,A- �I,►.i�,,.f�% 1 .Mall .. � - . �. •- -- ..4 r _ y±i� Photo Composite SCALE:NTS !,, Elevation SCALE: 3/8" =1' -0" 0 Z �A 5, CDOT Class III sign assembly 6' -0" x 6' -0" x 1/4" Aluminum sign panel. Face painted P.1 (Dk Lionshead Red) with V.1 (Reflective White) graphics. Sign supported by single tapering post assembly. Post, painted P.3 (Black) tapers from 8" at bottom to 4" at top. Post has (5) 6" bands of 1/2" plate stock, painted P.2 (Lionshead Anthracite). Second band from the bottom has cut -out 1/4" logo backer plate, painted P.3 (Black), with 1/4" raised logo, P.2 (Lionshead Anthracite), 2- sides. Top of post has domed cap. 2 -Layer brand logo of 1/2" plate stock, 2- sides. L 1 t- I, _ w `r Plate metal brand detail, every pole at 5' -0" AFF. Ap�roved by the Design Review Board TOWN OF VA I L s By Warren Campbell at 10:44 am, Oct 15, 2012 0 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts- boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W O W Z V O W 0 v J W Q W 2 Z O y Level 1 Core Entry Level 2 Core Entry Sign Tpe 1.4.1s Lionshead Village welcome cec <e B ® ®® Lionshead Village welcome ceme B ® ®® Core A Elevation Detail SCALE: 3/8 " =1' -0" Z+ imy T Level 2 Pedestrian Entry South Wall 6 Vail The Grand View Note- It is anticipated to use 1/4" Plate aluminum sign panel pinned 1 1/2" off the ECO Transit logo where (stone) wall surface. Panel painted P.1 (Dk. Lionshead Recreation District TanftCe�er applicable Red). 1/4" x 11/2" Attachment straps at top and bottom. Straps painted P.3 (Black). 1/2" Dia. vandal resistant Village Villa e head fasteners, painted to match field. am 060 Level 2 Level 2 Messages are masked and enamel painted P.4 (White) Pedestrian Entry Pedestrian Entry South Wall North Wall Approved by the Design Review Board TOWN O F VA � L } By Warren Campbell at 10:44 am, Oct 15, 2012 .- Level 2 Pedestrian Entry North Wall Stantec % commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Conceptual Design 4 October, 2012 J W O Lu Z L3 O LLJ O V J W C Q W 2 y Z O J A Axonometric SCALE:NTS A Elevation SCALE: 1/2 " =1' -0° AM Photo Composite SCALE:NTS Note: this sign type is of the same construction as Sign Type 1.3.4: Existing Pole Mount Facility I.D. As a directional sign, this type includes an arrow icon. 2 -Sided cabinet construction blade mount icon signs fastened to an existing (light) pole. 3" Thick fabricated icon shapes are supported by 10" high bracket arms, same thickness that fasten to compression cuffs that wrap existing posts (post sizes will vary). Entire assembly painted P.3 (Black). Both faces of icon shapes have inset 1/4" plate stock panels, secured with countersunk vandal resistant mechanical fasteners, painted P.1 (Dk. Lionshead Red). Faces of inset panels have masked and enamel painted graphics, P.4 (White). Approved by the Design Review Board TOWN OF VAI )"By Warren Campbell at 10:44 am, Oct 15, 2012 Stantec C commarts 1112 Pearl Street Boulder, CO 80302 TEL 303.447.8202 FAX 303.440.7069 www.commarts-boulder.com www.stantec.com BLDG. SIGNAGE & GRAPHICS Design Intent 4 October, 2012 J W Q H J Z CZ W Z C, C= w F� 0 C) J W O Q W Z 0