HomeMy WebLinkAboutB13-0548 CR1 plans APPROVED 33"
7-1/2"
Outlet "C"(Optional)
Outlet "A"(Optional)
Outlet "B"(Standard)
AA
25"
Deep structuralreinforcing columns
Adjustable adapter
24-1/2"
25"
13-1/4"
Invert 15"
10"
Static water line
Engineered inlet andoutlet diffuser(see description)
See note #10
CL of inlet& outlet
NOTESListed by IAPMO to ASME grease interceptor 1.standard #A112.14.3 and CSA B481.1. Factory installed Built-in flow control.2.For gravity drainage applications only.3.Do not use for pressure applications.3/8" thick seamless high density polyethylene walls.4.Unit supplied with built-in adapter for up to 3 1/2" of5.adjustability. Additional riser(s) are also available fordeeper burial depth.Cover placement allows full access to tank6.for proper maintenance.Vent not required unless per local code. 7.Engineered inlet and outlet diffusers are 8.removable to inspect/clean piping.For on-the-floor or buried applications.9.Integral Air Relief / Anti-siphon.10.Three outlet options for easy rough in. Unit11.shipped with outlet diffuser in outlet "B".
SPECIFICATIONS (GB-35) 3" inlet/outlets Sch. 40. (No-Hub)1.Max flow rate: 35 GPM2.Liquid capacity: 35 Gallons3.Max grease capacity: 142 lbs. (20 Gallons)4.Max solids/sediment capacity: 9.5 Gallons5.Unit weight w/std. covers: 87 lbs.6.2,000 lb. load rated, bolted, gas/water tight 7.composite covers.Maximum operating temperature 190 F continuous.8.
ISOMETRIC VIEW
END VIEW
SECTION "A-A"
TOP VIEW
DIFFUSION FLOW TECHNOLOGYThe inlet diffuser splits incoming effluent into two paths that utilize the entire liquid volume of the tank for efficient grease separation. The calibrated openings greatly reduce effluent turbulence. The effluent enters the main chamberwithout disturbing the existing grease or sediment layers. The integral air relief/anti-siphon in the top of the outlet diffuserallows pressure stabilization within the unit during operation.The bottom of the outlet diffuser allows only effluent which is free of grease to exit the tank. It can easily be attached to any of the three outlets provided to ease jobsite piping layouts.
ENGINEER SPECIFICATION GUIDESchier Great Basin™ grease interceptor model # GB-35 shall be lifetime guaranteed and made in USA of seamless, rotationally-molded High Density Polyethylene with minimum 3/8” uniform wall thickness. Interceptor shall be furnished for above or below grade installation. Interceptor shall be built in accordance to ASME A112.14.3 (type C), with field adjustable riser system, built-in flow control, built-in test caps and three outlet options. Interceptor flow rate shall be 35 GPM. Interceptor grease capacity shall be 142 lbs. Cover shall provide water/gas-tight seal and have minimum 2,000 lbs load capacity.
OPTIONS:Teleglide field adjustable risers for extending covers to grade•Male pipe thread connections•4" or 2" Plain end pipe or male pipe thread connections•Clamping collar kit•
Schier Products9500 Woodend RoadEdwardsville, KS 66111Tel: 800-827-7119Fax: 800-827-9664www.schierproducts.com
Made in the U.S.A
DESCRIPTION:
DWG BY:DATE:REV:THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SCHIER PRODUCTS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SCHIER PRODUCTS IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
TEU 12/7/10 2 - 5/3/13 MATL:
PART NUMBER:
GREAT BASIN SERIES POLYETHYLENEGREASE INTERCEPTOR 35 GPM, 35 LIQUIDGALLONS, 142 GREASE POUNDS CAPACITY
PE
GB-35