HomeMy WebLinkAboutB14-0003 lighting specs BNORALI G HTI N G�
NHIC-17QAT / NHIC-17QNBAT Type
Project
6" IC Air-Tight Line Voltage Housing Catalog No.
Source: 100W Max. (Varies with trim) Lamp/Wattage
PRODUCT DESCRIPTION DIMENSIONS
New construction housing for use in insulated ceilings can be in direct contact with thermal
insulation.Air-tight construction provides energy savings by reducing the flow of air through � �
the ceiling.
O
FEATURES �-vz� � �� Q
• Rated for direct contact with insulation �
• cULus listed for damp location and through branch circuit wiring O
• Quick connect provided
• 24-1/2"Bar hangers with captive nails and alignment foot �s-sia°� I J
• Accommodates 1-3/4"maximum ceiling thickness Ceiling Cut-out 9 3�$
CONSTRUCTION
Plaster Frame Cut-out: 6-3/8" Housing Length: 10-1/8"
High quality 0.040 steel die cut one piece frame. ID: 6" Housing Width: 7"
Housing Height: 7-1/2"
Housina
0.040 aluminum housing with riveted cap adjusts to maximum ceiling thickness of 1-3/4" Lama
(45mm).Spring brackets accept torsion wing trim springs;slots on socket plate surtace 100W max.-lamp and wattage varies with trim(ordered separately)
accept standard coil springs.
Air Flow Restriction FIRE BOX
Housing has factory installed gaskets to restrict airtlow from room into ceiling plenum to NRA-126:Nora Lighting's Fire Rated Recessed Light Enclosure allows a
<2CFM(cubic feet per minute)in accordance with ASTM-283 Air-Tight requirements. architects,specifiers and installers to easily maintain the integrity of
firerated ceilings for one-hour.
Socket Labels and Listinps
NHIC-17QAT: cULus Listed for Damp Location w/Feed Through
Galvanized steel socket plate adjusts inside housing for optimum light performance.Contains cULus Wet Listed(Only with designated trims)
a single medium base socket.Protective cap included to protect socket interior during ceiling Meets or exceeds ASTM-283 Air-Tight Requirements
painting.Socket plate can be removed in the field to convert to a floating socket. Washington State Approved
NHIC-17QNBAT: NYC Approved:Calendar#43895
Socket is free floating and installs to eyeball,gimbal ring and new trims equipped with socket
brackets.Protective cap inclutled to protect socket interior during ceiling painting.
Bar Hangers C V� US AIR
Two 13-3/4"to 24-1/2"adjustable bar hangers with captive nails are included on frame. Bar LISTED TIGHT
hangers are parallel to junction box,but can be repositioned 90°perpendicular to junction box
if desired."L"Shaped bar hanger foot to align to bottom of construction joist.A T-Bar notch
allow for easy installation in a suspended ceiling.
Junction Box
Prewired 25 cubic inch 0.064"thick galvanized steel,with five 1/2",two 3/4"knockouts,
four RomexO pryouts,and snap on covers.All leads are#18AWG wire,the ground wire is
connected to the bottom,and quick connectors are supplied on all leads.Through branch
circuit wiring,(4-in, 4-out).
Quick Connect Feature
Housing contains three UL approved quick connections that allow insertion of 1/4"stripped
solid or tinned standard conductors to be inserted into the connector.Connectors are pre-
attached to fixture power,common,and ground circuits.
Thermal Protector
Standard UL thermal protector rated for 90°C is affixetl to inner top surtace of housing.
Housings
❑NHIC-17QAT:6"IC Air-Tight Line Voltage Housing,Atljustable Socket Bracket
❑NHIC-17QNBAT:6"IC Air-Tight Line Vottage Housing,Floating Socket(No Bracket)
❑NHIC-17QAT/FX:6"IC Air-Tight Line Voltage Housing,Adjustable Socket Bracket with Fire Box
���L I G H T I N G 6505 Gayhart St.,Commerce,CA 90040 Page 1 of 1
www.noralighting.com • Specifications subject to change without notice. OO 2011
o Phone:800.686.6672 • FAX:800.500.9955 • e-mail:nora@noralighting.com