The URL can be used to link to this page

Home My WebLink AboutOTC14-000806 -04 -2014 inspection Request Reporting 4:01 gm Vail, CO - City A /P /D Information Activity Const Type Owner Contractor Description Comment Requested Inspect Date: Thursday, June 05, 2014 Site Address: 4605 MEADOW DR VAIL Lathorp Residence Unit 4 -14 OTC14 -0008 Type: OTC LATHROP, PETER C. Occupancy: BZ CONSTRUCTION Replace same for Ave windows Unit #4 -14 paper submittal route to JRM - CGODFREY Requested Inspection(s) Item: 542 PLAN -FINAL Requestor: Comments: 904 -5209 Assigned To: GRUTHER Action: Item: 90 BLDG -Final Requestor: Comments: 904 -5209 Assigned To: JMONDRAGON Action: Inspection History Item: 542 PLAN -FINAL Item: 90 BLDG -Final Exp: Exp: Sub Type: AMF Use: Page 19 Status: ISSUED Insp Area: Phone: 970- 4 52 /l Requested Ti 08:00 AM Ph e, „ , red By: JMONDRAGON K uested Time: 01:00 PM Phone: Entered By: JMONDRAGON K REPT131 Run Id: 14832 0 v,/j U-�,,, 1'\ i - I C" -0 MAR 2 6 2014 TOWN OF VAIL Town of Vail OFFIC` ;OPY Tc)\Nn of Vail REVIEWED FOR CODE COMPLIANCE Date BY: Code'. x -� e- C� L) - �-LG . )-O\ Ir r,-1) 0 0 O NOTE: THIS PERMIT MUST BE POSTED ON JOBSITE AT ALL TIMES TQt4h` OF tiAII. ' Town of Vail, Community Development, 75 South Frontage Road, Vail, Colorado 81657 p. 970.479.2139, f. 970.479.2452, inpsections 970.479.2149 OVER THE COUNTER PERMIT OVER THE COUNTER Permit #: OTC14 -0008 Job Address: 4605 MEADOW DR VAIL Location......: Lathorp Residence Unit 4 -14 Parcel No....: 210112427014 Valuation.....: $11,000.00 OWNER LATHROP, PETER C. 03/26/2014 318 JACKSON ST DENVER, CO 80206 CONTRACTOR BZ CONSTRUCTION 03/26/2014 BRIAN ZAIKIS PO BOX 2728 VAI L CO 81658 License: C000003388 Description: Replace same for same windows Unit #4 -14 Project #: PRJ14 -0098 Applied.....: 03/26/2014 Issued...: 04/16/2014 Phone: 970 - 904 -5209 ................................................. ............................... FEE SUMMARY ...>.............>.............................. .. >................. «.. >....... DECLARATIONS I agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure according to the town's zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town applicable thereto. REQUESTS FOR INSPECTION SHALL BE MADE TWENTY -FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM 8:00 AM - 4:00 PM. combination permit_012811 Building Permit ------ - - - - -> $195.25 Bldg Plan Check ----- - - - - -> $126.91 Use Tax Fee------------------ - - - - -> $20.00 Electrical Permit ---- - - - - -> $0.00 Elec Plan Check ------ - - - - -> $0.00 Mechanical Permit - - - - - -> $0.00 Mech Plan Check ---- - - - - -> $0.00 Additional Fees--------------- - - - - -> $0.00 Plumbing Permit --- - - - - -> $0.00 Plmb Plan Check ---- - - - - -> $0.00 Investigation------------------ - - - - -> $0.00 Will Call ------------------------------ > $5.00 TOTAL PERMIT FEES--------- - - - - -> $347.16 Payments ------------------------------- > $347.16 BALANCE DUE ------------------------ > $0.00 DECLARATIONS I agree to comply with the information and plot plan, to comply with all Town ordinances and state laws, and to build this structure according to the town's zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town applicable thereto. REQUESTS FOR INSPECTION SHALL BE MADE TWENTY -FOUR HOURS IN ADVANCE BY TELEPHONE AT 970.479.2149 OR AT OUR OFFICE FROM 8:00 AM - 4:00 PM. combination permit_012811 1 1 CONDITIONS OF APPROVAL TO BE MET PRIOR TO FINAL SIGN OFF Permit #: OTC14 -0008 Owner: LATHROP, PETER C. Lathorp Residence Unit 4 -14 Cond: 8 (PLAN): No changes to these plans may be made without the written consent of Town of Vail staff and /or the appropriate review committee(s). Cond: 201 (PLAN): DRB approval shall not become valid for 20 days following the date of approval, pursuant to the Vail Town Code, Chapter 12 -3 -3: APPEALS. Cond: 202 (PLAN): Approval of this project shall lapse and become void one (1) year following the date of final approval, unless a building permit is issued and construction is commenced and is diligently pursued toward completion. combination permit-012811 Address: 4605 MEADOW DR VAIL Location: *VAUj TOWN REQUIRED INSPECTIONS AND STATUSES Permit #: OTC14 -0008 Owner: LATHROP, PETER C. Lathorp Residence Unit 4 -14 Address: 4605 MEADOW DR VAIL Location: Item: 00542 PLAN -FINAL Item: 00090 BLDG -Final combination permit_012811 TOWN OF VAIL, COLORADOCopy Reprinted on 04 -16 -2014 at 10:28:35 04/16/2014 Statement Statement Number: R140000304 Amount: $347.16 04/16/201410:28 AM Payment Method: Check Init: CG Notation: ck 1011 BZ Construction ----------------------------------------------------------------------------- Permit No: OTC14 -0008 Type: OVER THE COUNTER Parcel No: 2101 -124- 2701 -4 Site Address: 4605 MEADOW DR VAIL Location: Lathorp Residence Unit 4 -14 Total Fees: $347.16 This Payment: $347.16 Total ALL Pmts: $347.16 Balance: $0.00 ACCOUNT ITEM LIST: Account Code Description Current Pmts -------------- - - - BP 00100003111100 - -- ------------------------ - - - - -- ------ BUILDING PERMIT FEES - - - - -- 195.25 PF 00100003112300 PLAN CHECK FEES 126.91 UT 11000003106000 USE TAX 4% 20.00 WC 00100003112800 WILL CALL INSPECTION FEE 5.00 Department of Community Development OF va�� 0 J 75 South Frontage Road West Vail, CO 81657 TOWN Tel: 970 -479 -2128 �� Community Development www.vailgov.com Department Development Review Coordinator WINDOW REPLACEMENT PERMIT APPLICATION (This permit is applicable to one and two family dwelling units only) (Permit fee = standard building fees and design review fee) Project Information L 4 Owner Name: 6e c � ti 1' � Parcel #: nL 10 I 1 J01, 3L / I n (For Parcel #, contact Eagle County www.eaglecounty.us/patie) Assessors Office at (970- 328 -8640 or visit +Ar Project Street Address: ' r,' �,, a.1 0 9 - � (Number) (Stye (Unit #) Contractor Information Business Name: 37 C01f \4( \.)CWd ✓► Business Address: U?k -17 _19 r " city Ik't State`: C. Zip: I L� Contact Name: ' +,r o a.,\ �4t K, 6 Contact Phone: 170 9 C%H 5'010!3 Contact E- Mail:.�1 < t��►J C e^+lG�$ S. �+ Applicant Information (fill in if different from contractor) Applicant Name: Applicant Phone: Applicant E -Mail: I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate site plan, and state that all the information as required is correct. I agree to comply with the information and site plan, to comply with all Town ordinances and state laws, and to build this structure according to the town's zoning and subdivision codes, design review approval, International Building and Residential Codes and other ordinances of the Town applicable thereto. n i.. Owner /Owner's Representative Signature Required (typed or digital signature) ( ) Checking this box indicates you are electronically signing this application and agree to the above statement. For Office Use Only: Fee Paid: Received From: Cash Check # CC: Visa / MC Last 4 CC # Auth #: Type of Building: One Family (F-) Two Family (Duplex) (1 ) Multi- Family (f J) Submittal Requirements: • Joint Property Owner Written Approval Letter (duplex or multi - family HOA) • Two (2) plan sets indicating: • Floor plans showing window location(s) and eleva- tions (window schedule may be substituted for eleva- tions) • Emergency egress requirements in bedrooms • Size of windows and openings • U -Value of windows • Material, cut sheets and color of windows (must match style and color of building) • Full view elevation photos of all sides of building Detailed Scope and Location of Work: 114 4.e V 1 i (use additional sheet if necessary) Valuation Work Included Plans Included of Work Electrical ((-)Yes (6)No (( -)Yes (X)No Mechanical ((~)Yes ((,-k)NO ( (-)Yes a)No Plumbing (( -)Yes (XNo (( -)Yes Q)No Building (R )Yes ((')No ( (-)Yes (,)No Value of all work being performed: $ w1boo 0 (value based on IBC Section 109.3 & IRC Section 108.3) Date Rece rel D MAR 26 2014 TOWN OF VAIL Project #: 7ieT1 u — 00 �(.� - Building Permit #: y TCi -1 — 0 cwg, Lot #: Block # Subdivision. Vk'LA&ea�Cc"ip r)Vl'_YW W l OA-S 12 -Sep 20 Vail ��SRAetClub Condominiums March 13, 2014 Town of Vail 75 South Frontage Road Vail, CO 81657 Dear Community Development, The Vail Racquet Club Homeowners Association recently received a request on March 4, 2014 from the owner of Building 4, Unit 14 to replace the exterior windows and doors with new "same for same" windows and doors which are more energy efficient. The Association conditionally approved this improvement based upon the owner receiving the proper Town of Vail permits and approval. If the To has any questions or desires further information, please let me know. Sj r ly, r Ivy 4695 Vail Racquet Club Drive Vail, Colorado 81657 800 -428 -4840 • 970- 476 -4840 970- 476 -4890 Fax www.vailracquetclub.com Account Account: R009516 Location Owner Information Situs Address 004605 MEADOW Owner Name LATHROP, PETER DR # 14 C. Tax Area SC 103 - VAIL (TOWN) - Owner Address 318 JACKSON ST SC103 DENVER, CO 80206 Parcel Number 2101 - 124 -27 -014 Legal Summary DESC: BLDG 4 Subdivision: VAIL RACQUET CLUB CONDOMINIUMS Unit: 14 Transfers Sale Price Sale Date $112,500 08/22/1988 $150,200 1 L/ 12i 1980 Images • Photo Page 1 of 1 Assessment History Actual (2013) $340,900 Primary Taxable $27,140 Tax Area: SC 103 Mill Levy: 46.2540 Type Actual Assessed Acres SQFT Units Improvements $340,900 $27,140 0.000 1114.000 0.000 Land 0.035 0.000 0.000 Reception Number Book Page W 0,189 P: 0798 13: 0313 P: 0319 http: / /property.eaglecounty.us/ assessor /taxweb/ account .jsp ?accountNum= R009516 &doc= 03/26/2014 Sierra Pacific Windows A Division of Sierra Pacific Industries 1121 Singletree Road, Box 2040 Edwards, Colorado 81632 -2040 (970)926-3715 (Office) SIERRA PACIFIC (970) 926 -3745 (Fax) sbutts @spi- ind.com March 03, 2014 2:28 PM Sold To: BZ CONSTRUCTION ,CO BRIAN ZAIKIS zaikis @comcast.net Ship To: VRC UNIT 4 -14 CUSTOMER COPY Order Number 90304408 Terms: Cash on Delivery Required Deposit: $2,950.00 PO #: Drawing Page(s) Job #: Primed vs Clear Permit # : Operation Box Screens: No Box Hardware: No vraer L,necR I_Isi $6,989.00 4.4% Tax Rate Species Jamb Size Drawing Page(s) Quantity Primed vs Clear O/S Purchase lead time Operation Exterior Trim 0/S Purchase warranty Rough Opening Hardware WUI Compliant Glazing / Lites Screens Terms and Conditions Warranty Information [3] Limited Warranty (Applies to these line item numbers) No Warranty (Applies to these line item numbers) Direct Ship: No Subdivision: Tract Number: Property Location: Property Owner: 8.3 3/29/13 Page 1 of 6 Add -On to: Lender. Color(s) (Clad) in order. Owners Manual /SPW Warranty 024 Bronze 2604 Installation Instructions _ Shop Drawings (Exterior) (Interior) Distressed Colonial Contemporary (This order is subject to the terms and conditions printed on the back page. Please read them before signing.) Customer Signature: Sales Rep Signature: Spencer Butts Date: Weighted Values U -Fac: 0.29 SHGC: 0.26 scl ft: 150 Order Summary Net Total $6,989.00 4.4% Tax Rate $307.52 Labor Charge $0.00 Order Total $7,296.52 Order Number: 90304408 Page 2 of 6 Initials: Itm Qnty Product Code Rough Opening Width x Height Oper Sym Location Glaze Options Lite or Grille Pattern Hardware Exterior Trim Jam Size (inches) Additional Options (Inches) 1 2 C -PS -7278 1/2 -2 71 15/16 "x80 3/4" OX Insulated 1 Lite Genoa /2165 No Brickmould 6 11/16" Coating: 2604 Patio Slider LoE' -272 Rustic Umber Clad: 024 Tempered - Hardware Ship Bronze Capillary Bronze Loose Doug Fir Drawing Required LoE -i89 - Screen Clear Int. U -fac: 0.29 SHGC: 0.27 Head:4 5/8" 1580 Screen Vt: 0.46 CR: 49 Stile:3 3/8" Spl Trim Sets KickA 5/8" 2 1 C -PS -7278 1/2 -2 71 15/16 "x80 3/4" XO Insulated 1 Lite Genoa /2165 No Brickmould 6 11/16" Coating: 2604 Patio Slider LoE' -272 Rustic Umber Clad: 024 Tempered - Hardware Ship Bronze Capillary Bronze Loose Doug Fir Drawing Required LoE -i89 - Screen Clear Int. U -fac: 0.29 SHGC: 0.27 Head:4 5/8" 1580 Screen Vt: 0.46 CR: 49 Stile:3 3/8" Spl Trim Sets KickA 5/8" 3 1 C -ID -34 5/1678 1/4 -1 36 3/4 "x80 3/4" L Insulated 1 Lite OR Brass No Brickmould 6 11/16" Coating: 2604 Inswing Door LoE' -272 - Hinges Clad: 024 Tempered No Hardware Bronze Capillary Double Bore Doug Fir Drawing Required LoE -i89 Brown - Qlon Clear Int. Limited Warranty HeadA 5/8" 5 5/8" STILES U -fac: 0.29 SHGC: 0.25 Stile:4 5/8" Vt: 0.42 CR: 44 Kick:613 /16" 4 1 C -WS -71 3/823 -1 72 1/8 "x23 3/4" XO Insulated 1 Lite Bronze No Brickmould 6 11/16" Coating: 2604 Slider Capillary - Hardware No Sill Nose Clad: 024 LoE' -366 Bronze Bronze ' Priced By Factory LoE -i89 Ext:- Screen Pine U -fac: 0.29 SHGC: 0.2 Clear Int. Vt: 0.47 CR: 43 Order Number 90304408 Page 3 of 6 Initials: woorevianon ney 1. TERMS: a. All C.O.D. orders are to be paid in full to the delivery driver with either a Cashier's Check or a personal check, preprinted with the Buyer's name and address, prior to unloading the order. On orders where Glaze Options Hardware Options Exterior Trim Additional Options Insulated - Insulated Glass SIM DL - Simulated Divided Lite TSL - Tandem Sash Lock Swing Screen - Swing Door Screen SMB = Stucco Brickmould ESH = Extended Sill Horn SDL - Single Divided Lite Lami 1 Side - Laminate 1 Side FOL - Foot Operated Lock Life Finish - Lifetime Finish ESN 2 = Extended Sill Nose 2" Primed Int. - Primed Interior IDL - Insulated Divided Lite FCH - Folding Crank ESN 3 = Extended Sill Nose 3" Clear Int. - Clear Interior legal action. 4. ESTIMATE OR BIDS: a. All pricing is good for 30 days unless specifically noted to the contrary. Primed Ext. - Primed Exterior b. Sierra Pacific Windows assumes no responsibility for errors in take -offs or pricing. 5. ORDERS: a. Upon signing, Customer agrees to all terms and conditions of this contract. b. Orders are subject to delay due to strikes, fire, floods, accidents, or any other cause beyond our control. Sierra Pacific Windows will not be responsible for loss or damage beyond its control. Clear Ext. - Clear Exterior warranty inrormation LIMITED WARRANTY: Sierra Pacific Windows warrants certain components only as more specifically described in the written Limited Warranty and disclaims any other express or implied warranty, including, without limitation, any implied warranty of merchantability or fitness for a particular purpose. The product is not certified for air infiltration, water penetration, structural loading, forced entry or hardware load testing. Damages are limited by the terms of the Limited Warranty. Customer is advised to carefully review the Limited Warranty for the specific provisions applicable to the products purchased. NO WARRANTY: Sierra Pacific Windows warrants only that the product has been manufactured in accordance with the specifications contained in the order. Sierra Pacific Windows disclaims any other express or implied warranty, including, without limitation, any warranty of merchantability or fitness for a particular purpose. Disclaimer Information Outside Purchase Items: Warranty covered by product manufacturer's specific warranty. Sedonas with jambs greater than 4 -9/16: Limited screen opening Radius Sedonas: Limited sash opening — Terms and conditions of Sale 1. TERMS: a. All C.O.D. orders are to be paid in full to the delivery driver with either a Cashier's Check or a personal check, preprinted with the Buyer's name and address, prior to unloading the order. On orders where vouchers are pre- approved, they must be presented to the driver prior to unloading the order. b. This quoted price includes a 3% discount for payment made in cash, check, or other means not involving the use of a credit card. This discount is offered to all prospective buyers. Payment by Credit Card will waive this discount. c. No deductions may be taken from the invoice amount unless authorized by Sierra Pacific Windows prior to delivery. Sierra Pacific Windows will not be responsible for any back charges resulting from additional materials or work performed by others (see Warranty for further information) d. Past due balances are subject to 1.5% monthly finance charge. e. Any check or other payment returned to Sierra Pacific as the result of insufficient funds or canceled payment will result in a $50 processing fee added to the order total. 2. RIGHT TO LIEN: a. In the event the contract amount is not paid in full, Sierra Pacific Windows reserves the right to place a lien or bond which may be asserted under any provision of the law, to secure payment of the contract amount. 3. ATTORNEY FEES: a. If any legal action is required, Sierra Pacific Windows is entitled to recover reasonable attorney fees, court costs and all other reasonable professional expert or consultant fees and costs related to such legal action. 4. ESTIMATE OR BIDS: a. All pricing is good for 30 days unless specifically noted to the contrary. b. Sierra Pacific Windows assumes no responsibility for errors in take -offs or pricing. 5. ORDERS: a. Upon signing, Customer agrees to all terms and conditions of this contract. b. Orders are subject to delay due to strikes, fire, floods, accidents, or any other cause beyond our control. Sierra Pacific Windows will not be responsible for loss or damage beyond its control. c. Seller is not liable for prospective profits or special indirect, consequential or incidental damages, nor may the recovery of any kind against seller be greater in amount than the purchase price of the specific material sold and causing the alleged loss damage or injury. 6. CHANGE ORDERS: a. Order changes will only be accepted within 3 days of signing the original order. b. Special order items may only be changed or cancelled within 3 days from signing the original order. c. Cancellations may only be made within 3 days from signing the original order. d. Order changes are immediately binding. They do NOT allow an additional 3 days for modification or cancellation. e. Sierra Pacific Windows reserves the right to adjust prices for order changes made at the request of the buyer at any time following original order acceptance. f. Any change to the order may result in a delayed delivery date. 7. TAILGATE DELIVERY: a. Sierra Pacific Windows is not responsible for labor to unload. Buyer must provide sufficient labor at the job site when driver arrives. b. Back orders will be noted on the paperwork and will deliver as soon as possible. c. Any items missing or damaged must be noted on the driver's paperwork at the time of delivery or it will be assumed complete and in good condition. d. Sierra Pacific Windows is not responsible for goods picked up by buyer in his \her own vehicle. 8. SALES TAX: a. The Sales Tax rate in this quote is estimated at the time of the quote. Customer agrees to pay the actual Sales Tax in effect at the time of delivery of any portion of this order. Page 4 of 6 Initials: Sierra Pacific Windows Limited Warranty This Limited Warranty is effective for Sierra Pacific Products manufactured on or after April 1, 2006 and installed in the continental United States and Canada, subject to the stated conditions and limitations. Any previous warranties will continue to apply to products manufactured by Sierra Pacific prior to this date. For additional information, including care and maintenance instructions, installation instructions and previous warranties, refer to www.sierrapacifiewindows.com or contact your local Service Center at 1- 800 - 824 -7744. Insulated Glass - 20 Year Limited Warranty Sierra Pacific Windows (SPI), as manufacturer, warrants the insulated glass supplied in its window and door products against failure of the air seal due to defects in materials or workmanship for a period of twenty (20) years from the date of manufacture. This warranty does not include cracked or broken glass or damage to the product resulting from accident, abusive handling, misuse, or shattering due to heat buildup. This warranty does not include any insulated units that exceed 50 square feet in overall size. Should there be a failure of the air seal within the first twenty (20) years of the warranty period, SPI will deliver to the place of product installation either a replacement of insulated glass or sash glazed with insulated glass or will refund the purchase price, at SPI's discretion. Within a period of two (2) years from the date of manufacture, SPI will replace defective insulated glass at no charge or will refund the purchase price, at SPI's discretion. SPI shall not be responsible for repainting or refinishing involved in the replacement of glass. After two (2) years from the date of manufacture through the end of the warranty period, SPI will replace defective insulated glass or will refund the purchase price, at SPI's discretion. SPI shall not be responsible for the cost and arrangement of installation, repainting, refinishing or similar activities involved in the replacement of glass. Wood Components, Hardware, Weather - stripping and Screens -10 Year Limited Warranty SPI warrants for a period often (10) years from the date of manufacture, that the wood components, hardware, weather - stripping and screens which accompany its products (the "Components ") will be free from defects in workmanship or materials which might unreasonably affect the product's normal functioning. Within a peri- od of two (2) years from the date of manufacture, SPI will repair or replace any Components that are defective as to workmanship or materials at no charge, or will refund the purchase price, at SPI's discretion. SPI shall not be responsible for re- painting, refinishing or similar activities connected with the repair or replacement of any Component. After two (2) years from the date of manufacture through the end of the warranty period, SPI will repair or replace any Components that are defective as to workman- ship or materials at no charge, or will refund the purchase price, at SPI's discretion. SPI shall not be responsible for the cost and arrangement of installation, repaint - ing, refinishing or similar activities involved in the repair or replacement of any Component. This warranty shall be null and void if the customer fails to properly finish, care for and protect all wood items against moisture and excessive dryness and ensure that all surfaces, interior and exterior, top and bottom, are thoroughly painted, varnished or sealed by accepted industry finishing standards. This warranty shall not apply to any weather - stripping, vinyls or plastics to which any paints, varnishes or stains have been applied. Metal Clad Warranty - 10 Year Limited Warranty SPI will provide a limited ten (10) year warranty on the coating on the metal cladding against cracking, checking or peeling due to adhesion loss. In addition, the coat- ing is warranted for ten (10) years against chalking in excess of a number eight (8) rating based on ASTM D 4214 -98 and against color change of more than five (5) Delta E units in accordance with ASTM D 224493. Within a period of two (2) years from the date of manufacture, SPI will repair or replace the defective metal cladding at no charge, or will refund the purchase price, at SPI's discretion. After two (2) years from the date of manufacture through the end of the warranty period, SPI will repair or replace the defective metal cladding, or will refund the purchase price, at SPI's discretion. SPI shall not be responsible for the cost and coordination of installation associated with the repair or replacement of the defective metal cladding. On any replacement parts where new wood is a component, SPI shall not be responsible for repainting, refinishing or similar activities connected with such replacement. This warranty excludes minute fracturing that may occur in proper fabrication procedures. Warranty Conditions, Exclusions and Limitations. This warranty is limited to defects in workmanship and materials and expressly excludes damage or defects caused by or arising from: • On -site damage occurring during construction due to vandalism, acts of nature or any other cause beyond SPI's control. • Improper handling or installation by the builder or consumer and/or failure of the builder or consumer to follow manufacturer's instructions. • Normal wear and tear, and natural weathering of surfaces. • Prolonged exposure to weather in the unfinished and/or primed state. • Naturally occurring corrosion or tarnishing of hardware finishes. • Installation of the window or door in its opening in a manner which is not plumb, square and true and adequately shimmed on all sides. • Improper installation not in conformance with Sierra Pacific installation instructions: operational problems and problems related to water and/or air infiltra- tion/leaking as a result of improper installation or flaws in building design or construction. • Strain which is applied to the unit by movement of the building or where provisions have not been made in accordance with sound industry practices for adequate expansion or contraction of framing members. • Products subjected to conditions exceeding their design size and/or design pressure limitations. • Doors with ADA compliant sills, special hardware or no hardware. • Windows with special hardware or no hardware. • Variations in the color, grain and texture of wood products. • Wood cellular structure failure for wood Components and any Components that come in direct contact with soil. Note: superficial mold/mildew does not indicate wood cellular structure failure. • Improper finishing and/or maintenance of wood Components. • Warping in door panels unless it exceeds 1/4" in the plane of the panel itself for doors up to T -6" x T -0" and/or 3/8" for doors over T -6" x T -0 ". This does not refer to the relation of the door panel to the frame or jamb in which it is hung. Action on any claim for warpage may be deferred for a period of time up to 12 months at SPI's option to permit conditioning of the door to humidity and temperature ranges at the jobsite. • Minor glass imperfections that do not affect normal vision or product performance per the guidelines established by ASTM C 1036 -01. Effective 04 101/06 Page 5 of 6 Initials: • Glass breakage, failure due to misuse or abuse, and damage caused by failure to properly finish and provide maintenance, by alteration or modification to the window (e.g. customer applied tints or films, paint finishes, security systems), or as a result of any cause beyond the control of Sierra Pacific (e.g. van- dalism, fire, flood, earthquake, other acts of nature). • Condensation, surface fogging or frost on exposed surfaces of windows or doors and any related water damage which may occur as the natural result of humidity within the structure or changes in interior /exterior temperatures. (Note: most condensation problems are related to excessive humidity levels in a structure; contact a heating/air conditioning specialist for help). • Finish failures or corrosion of aluminum cladding or damage to other Components caused by chemicals or environmental conditions including but not lim- ited to air pollutants, acid rain, chlorine, brickwash and salt spray. • Corrosion, wear or failure of standard hardware or aluminum cladding in a seacoast or corrosive environment. • "Chalking" of the clad finish is not a defect unless it exceeds a numerical rating of eight (8) when measured in accordance with the standard procedures specified in ASTM D 4214 -98. Fading or changing in color of the "clad finish" is not a defect unless it exceeds five (5) E units (NBS), calculated in accor- dance with ASTM D 2244 -93, paragraph 6.3. Color change shall be measured on an exposed "clad finish" that has been cleaned of surface soils and chalk, and the corresponding values measured on the original or unexposed "clad finish." Fading or color changes may not be uniform if the surfaces are not equally exposed to the sun and elements. If the above ASTM standards change, the standards in effect at the time of purchase apply. • Products purchased through SPI Windows that are manufactured by a third party (e.g. vinyl windows, skylites, custom hardware) are not covered under the terms of this warranty. Refer to product manufacturer's warranty for terms of coverage. NOTE: The performance of paint and /or Components may vary based on installation in environments of heavy salt spray, air pollutants, acid rain or other corrosive substances, as well as based on elevation, orientation, altitude and other atmospheric conditions. Normal, regular maintenance of the product is required to maintain the appearance and to extend the finish life. It is recommended that there be a systematic fresh water cleaning program in effect in areas of high salt concentration, such as adjacent to the seashore and in areas of industrial or caustic atmospheres, to prevent the accumulation of concentrated salt or caustic chemical deposits. Products in these locations should be cleaned with mild detergent soap and water. This should be done every 3 months as a minimum, and more fre- quently if necessary, to minimize the build -up of salt or corrosive residue. Any chips or scratches must be repaired immediately and not left exposed to the elements. Consult the Sierra Pacific Windows Owner Manual for cleaning details. Units subject to the detrimental effects of air pollutants or chemical or caustic washes will not be covered by the terms of this Warranty. Allocation of Risks of SPI Product Performance. Because some water infiltration must be anticipated in all construction, it is imperative that the wall sys- tem be designed and constructed to properly manage moisture. SPI is not responsible for claims or damages caused by anticipated or unanticipated water infiltration; deficiencies in building design, construction and maintenance; failure to install SPI products in accordance with SPI Installation Instructions; or the use of SPI products in systems, such as barrier wall systems, unless proper management of moisture within the wall system is incorporated within the design of the system. The determination of the suitability of all building components, including the use of SPI products, as well as the design and installation of flashing and sealing systems, are the responsibility of the buyer, owner, architect, contractor, installer, or other con- struction professional and are not the responsibility of SPI. All risks related to building design and construction, fitness of SPI product for a particular purpose, or the maintenance, installation, and use of SPI products shall be assumed by the buyer and /or owner in conjunction with the architect, con- tractor, installer, or other construction professional. This Warranty sets forth our maximum liability for our products. We shall not be liable for special, indirect, consequential, or incidental damages. Your sole and exclusive remedy with respect to any and all losses or damages resulting from any cause whatsoever shall he as specified herein. We make no other war- ranty or guarantee, either express or implied, including implied warranties of merchantability and of fitness for a particular purpose to the original purchas- er or to any subsequent user of the product, except as expressly contained herein. In the event state or provincial law precludes exclusion or limitation of implied warranties, the duration of any such warranties shall be no longer than, and the time and manner of presenting any claim hereon shall be the same as, that provided in the express warranty stated herein. SPI does not warrant, expressly or impliedly, any special product or item that is manufactured according to specifications supplied by the consumer. The warranty on any replacement product will extend for the balance of the original warranty period. All warranty claims must be made within the applicable warranty period. SPI is giving you an express Limited Warranty. SPI cannot and shall not be liable to you for any other express or implied warranties provided by distributors, dealers, salespersons or any other representatives of SPI whether written or oral. Your exclusive rem- edy shall be repair, replacement or refund as stated in this warranty. SPI, in its sole discretion, may choose to repair the product as an option to replacement in full satisfaction of its warranty obligation. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation of the duration of implied warranties, so the limitations or exclusions set forth above may not apply to you. Should an implied warranty of merchantability or fitness for a particular purpose apply to you, those warranties are limited in time to the duration of this warranty. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. Claim Procedure To initiate a claim action under this Limited Warranty, contact the SPI Territory Manager who sold you the products. In the event this person is unknown, please con- tact: Your local Service Center at 1- 800 -824 -7744, or Siena Pacific Windows Customer Service Manager PO Box 8489 Red Bluff, CA 96080 www.sierrapacificwindows.com You will be required to provide the following information: (a) your name, address and telephone number; (b) description of product for which claim is made; (c) proof of date of purchase (invoice); (d) name of SPI sales representative (if known); and (e) nature of product failure and any further pertinent information. SPI may charge a fee for on -site product inspections. However, the fee will be fully refunded if the product is found to contain a defect covered by this warranty. Limited Warranty (as defined by Magnuson -Moss Warranty- Federal Trade Commission Improvement Act) Rev. 02/12 Sierra Pacific Windows 1121 Singletree Road, Box 2040 Edwards, Colorado 81632 -2040 (970)926-3715 (Office) (970) 926-3745 (Fax) sbutts @spi- ind.com Sold To: BZ CONSTRUCTION Ship To: VRC UNIT 4 -14 Drawings March 03, 2014 90304408 Page 6 of 6 1) C -PS -7278 1/2 -2(OX) 2) C -PS -7278 1/2 -2(XO) Qty: 2 Qty: 1 RO: 71 15/16 "x80 3/4" RO: 71 15/16 "x80 3/4" Jamb: 6 11/16" Jamb: 6 11/16" Loc: Loc: r' a Sym: Sym. Clad: 024 - Bronze Clad: 024 - Bronze Y T i T '•.T 4) C -WS -71 3/823 -1(XO) Qty: 1 RO: 72 1/8"x23 3/4" Jamb: 6 11/16" Loc: Sym: Clad: 024 - Bronze All Window /Door operations are viewed from exterior. Pictures are NOT to scale. They are offered as a rough approximation of design and mulling sequence, therefore CAD drawings may still be required on some units. 3) C -ID -34 5/1678 1/4 -1(L) Qty: 1 RO: 36 3/4 "x80 3/4" Jamb: 6 11/16" Loc: Sym: Clad: 024 - Bronze