HomeMy WebLinkAboutB16-0025 spec sheet 2_2.pdf Customer Last Name: iiEiC! First: r NANCY Date: I 3/3/20161 #Days. z
Job Site Evaluator: JONATHAN BLAIR Cell: 720.940.0259 Structural lob? INO ! Crew Size• 2
Existing Conditions:
W Wood Frame E Tear out to rough opening 5 6'step
I a T
T S A
N E E
0 R -, G
O r T
0 — N
w R G
Pad/Frame/Weather/Sheath
Dimension Species Qty Length Material Color Qty Qty Dimension Species
L 1x4 #2 Pine 12 8' R Ice/H20 1 5
u0 Foam insul 4 H
M E
g r Coil ST 1 A
E Sealant CV B T
R H
P
Trim
Dimension Species Qty Length Dimension Species Color Length Qty
14 clear Pine CLL 8' 6
E 1 ha clear Pine CLL 18' 2
X H 1x8 clear Pine CLR 18' 1
T T 1x4 clear Pine CLR 8' 12
3/4"qtr rd Pine CLR 10' 3
Speciatlty/Additional Material
• Install H-plugs on all double hung windows.
r' Screw pattern required on all azek installation.
c Ali azek joints need to be glued with PVC glue.
AAll windows need proper exterior head flashing.
` Make sure that the blinds will fit into the return area.
SEE PREVIOUS INSTALL FOR STYLE.ALSO,WE'RE SHOOTING TO HAVE THE NEW WINDOW SETUP LOOK LIKE THE EXISTING
WINDOW SETUP,WITH A SILL FROM WALL TO WALL ON THE BIG OPENING,AND A REGULAR SILL(LIKE THE PREVIOUS
INSTALL)ON THE SMALLER OPENING.ALSO,THE MULL CAPS SHOULD BE WIDER THAN THE CASING.CURRENTLY,
MULLCAPS ARE 1X4(ACTUAL),AND THE CASING IS 1X3 3/16.IF YOU NEED TO MAKE THESE WIDER,TO MEET PAINT LINES,
DO SO,BUT TRY TO KEEP THE RATIO.YOU SHOULD HAVE PLENTY OF 1X MATERIAL TO WORK WITH.BY THE WAY,PAY NO
ATTENTION TO THE CASING ON THE PREVIOUS INSTALL,SHE WANTS 1X, LIKE THE REST OF THE HOUSE.THE LAST
w INSTALLERS BLEW IT ON THAT. ANYWAY, DEMO ALL WINDOWS TO ROUGH OPENING,INCLUDING CASE,SILL AND
0 BRICKMOULD.LEAVE THE FRAMING ATH THE MULLS,50 THE HOUSE DOESN'T FALL DOWN.ICE/WATER ROUGH
Z OPENINGS.MAKE SILLS.USE 1X4 TO FURR THEM UP AND TO FURR IN FROM THE FRAMING AS NEEDED.MAKE AN APRON
z FROM 1X4,OR QUARTER ROUND,WHICHEVER WORKS BEST.INSTALL WINDOWS ON THE SILLS,LEVEL/PLUMB/SQUARE.
a INSTALL THE WINDOWS FAR ENOUGH TO THE EXTERIOR SO THERE'S AT LEAST 1 1/4"OF RETURN(FOR BLINDS).
Z FABRICATE AND INSTALL RETURNS. CAP THE MULLS AND CASE AS PER ABOVE.FOAM THE PERIMETERS.COIL TO THE 2X6
u AT THE JAMBS AND THE SIDING AT THE HEAD AND SILL.COIL.THANKS.
uu
I—
to
I—
E
CO
0