HomeMy WebLinkAboutA15-0064_Mircom DETECTORS_1437499680.pdf L. MIRcQM®
INTELLIGENT LOW PROFILE SENSORS MIX-200 SERIES
Mircom's MIX-200 Series intelligent plug-in smoke detectors Panel. Point ID capability allows each detector's address
with integral communication provide features that surpass to be set with decade address switches, providing exact
conventional detectors. Detector sensitivity is continuously detector locations for selective maintenance when chamber
monitored and reported to the FX-2000 Fire Alarm Control contamination reaches an unacceptable level.
1
to �
Intelligent Low Profile Ionization Smoke Sensor Intelligent Low Profile Photoelectronic Smoke
(MIX-1251B) Sensor(MIX-2251 B)
The Intelligent Ionization Smoke Sensor is constantly The Intelligent Photoelectronic Smoke Sensor is constantly
monitored to measure any change in its sensitivity due to the monitored to measure any change in its sensitivity due to the
environment(dirt,aging,temperature,humidity,etc.) It can environment(dirt,aging,temperature,humidity,etc.) It can
give an advance indication to the FX-2000 analog control give an advance indication to the FX-2000 analog control
panel of the need for maintenance and can be specific as panel of the need for maintenance and can be specific as
to where the maintenance is needed. It can be mounted in to where the maintenance is needed. It can be mounted in
a number of different bases. See the Ordering Information a number of different bases. See the Ordering Information
for a list of these bases and their descriptions. for a list of these bases and their descriptions.
II
Intelligent Thermal Sensors Intelligent Low Profile Photoelectronic Smoke
(MIX-5251 B/MIX-5251 RB/MIX-5251 H) Sensor with Thermal (MIX-2251 TB)
The Intelligent Thermal Sensors contain a dual thermistor The MIX-2251TB has the same features as the MIX-
sensing circuit for fast response. They provide open 2251B and includes a 135°F thermal sensor. It can
area protection with 50 foot spacing. The sensors rapid be mounted in a number of different bases. See the
response characteristic virtually eliminates the thermal lag Ordering Information for a list of these bases and their
which is characteristic of conventional heat detectors and descriptions.
insures operation as soon as the temperature reaches its MSFM
set point(MIX-5251 B),or upon a temperature rise of 15°F v s'r"�
per minute(MIX-5251 RB). The MIX-5251H provides fixed UL F• M EA app loved
high temperature detection at 190°F These sensors can be approved (MIX-12518)
2131
mounted in a number of different bases.See the Ordering S6295 CS920 7271-1477:122 205-94-E (MIX-22518/TB)
(MIX-12518, (MIX-1251B, (MIX-12518) (MIX-1251B)
Information for a list of these bases and their descriptions. MIX-2251B& MIX-225188 7271-1477:117 219-02-E
MIX-2251 TB) MIX-2251 TB) (MIX-2251B/TB) (MIX-2251B/TB)
S6299 CS717 7271-1477:114 390-02-E APPROVED
(MIX-52518/RB/H) (MIX-5251B/RB/H) (MIX-52518/RB/H) (MIX-5251B/RB/H) 3017996
CATALOGUE NUMBER 5904
NOT TO BE USED FOR INSTALLATION PURPOSES.
Mircom reserves the right to make changes at any time without notice in prices,colours,materials,components,equipment,specifications and models and also to discontinue models.
Specifications
Height Insect Screen Hole Size
2.0 inches (51 mm) Photo: 0.016 inch (0.41 mm) nominal
Ion: 0.035 inch (0.89mm) nominal
Diameter
6.1 inches (155 mm) Installed in B210LP Base Thermal Ratings
4.1 inches (104 mm) Installed in B501 Base Fixed Temperature Setpoint: 135°F (57°C)
Rate of Rise Detection: 15°F/min. (8.3°C/min.)
Shipping Weight High Temperature: 190°F(88°C)
Heat: 4.8 oz. (137 g)
Photo/Photo with Heat: 5.2 oz. (147 g) Voltage Range
Ion: 5.4 oz. (154 g) 15-32 volts DC peak
Operating Temperature Range Standby Current
Ion/Photo: 32°F to 120°F(0°C to 49°C) lon/Thermal:
Photo with Thermal: 32°F to 100°F(0°C to 38°C) 150 uA @ 24 VDC(without communication, LED off)
Thermal: 4°F to 100°F (-20°C to 38°C) 200 uA @ 24 VDC(one communication every 5 sec.
High Temperature: -4°F to 100°F (-20°C to 66°C) with LED enabled)
Photo/Photo with Thermal:
UL Listed Velocity Range 250 uA @ 24 VDC(without communication, LED off)
Ion: 0- 1200 fpm (0-5.1 m/sec) 300 uA @ 24 VDC(one communication every 5 sec.
Photo/Photo with Thermal: 0-4000 fpm (0-20 m/sec) with LED enabled)
Relative Humidity LED Current (max.)
10% -93% noncondensing
6.5 mA @ 24 VDC(on)
Note:Mounting sensors outside of the specified temperature ranges will cause sensor failures and erratic panel operation.
Ordering Information
Model Description
Intelligent Addressable Analog Sensors
MIX-1251B Intelligent Low Profile Ionization Smoke Sensor
MIX-2251 B Intelligent Low Profile Photoelectronic Smoke Sensor
MIX-2251TB Intelligent Low Profile Photoelectronic Smoke Sensor c/w 135°F Fixed Temp.Thermal Sensor
MIX-5251B Intelligent Low Profile Fixed Temp.Thermal Sensor 135°F
MIX-5251 RB Intelligent Low Profile Fixed Temp. and Rate of Rise Thermal Sensor 135°F
MIX-5251H Intelligent Low Profile High Temperature Thermal Sensor 190°F
Intelligent Analog Bases
B210LP Intelligent Flanged Mounting Base
B224B1 Intelligent Isolator Base
B224RB Intelligent Relay Base*
B501 Intelligent Flangeless Mounting Base
B501 BH Intelligent Sounder Base
B501 BHT Intelligent Temporal Tone Sounder Base
Accessories
RA-400Z Remote LED Annunciator
Note: For Canadian models add suffix°A".
When used with the M500X Fault Isolator Module, the number of relay bases between fault isolators is limited to 12.
NOT TO BE USED FOR INSTALLATION PURPOSES.
�' " O!® Distributed by:
Canada U.S.A.
25 Interchange Way 60 Industrial Parkway
Vaughan,Ontario L4K 5W3 Cheektowaga,New York 14227
Telephone:(905)660-4655 Toll Free:(888)660-4655
Fax:(905)660-4113 Fax Toll Free:(888)660-4113
Web page: http://www.mircom.com Email: mail@mircom.com CAT.5904
6) Rev.5