Loading...
HomeMy WebLinkAboutAdemco 5193SD Smoke.PDF Honeywell 5193S D/5193S DT V-PLEX® ADDRESSABLE SMOKE DETECTOR LI 7 IP # Honeywell's 5193SD/SDT Addressable Photoelectric Smoke Detector is designed to provide open area protection and to be used with compatible UL-listed Honeywell control panels that support V-Plex technology.The detector incorporates a state-of-the-art optical sensing chamber and an advanced microprocessor. Built-in Drift Compensation algorithms automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminates settling into the unit's chamber. The 5193SDT also features a restorable, built-in, fixed temperature(135° F/57.2° C)thermal detector. FEATURES • Easy Installation: Installation of the 5193SD/SDT detector •Versatile Mounting: Mounting is made simple with the is simplified by the use of a mounting base that may be included hardware and the large mounting ports, which pre-wired to the system, allowing the detector to be easily accommodate drywall anchors for easy surface mounting. installed or removed for maintenance or service. (See (See Figure 1). Figure 1). •Tamper Protection and Tamper Resistance:The detector • LED Status Indicators:Two LEDs(green and red) provide contains a built-in tamper switch that can communicate local visual indication of the detector's status—including back to the control panel in the event the detector is normal operation, alarm, out of sensitivity and trouble removed from its base. For an added level of security, conditions. the detector also includes a tamper resistant element that •Test button:This button allows the user to perform periodic prevents removal from the base without the use of tools. testing of the detector's circuitry and verify that the detector (See Figure 1). is within the sensitivity limits. DIRECT MOUNT HOLES ...,� , 111' 1_` ,�rrJ • SNAP OFF TAB FOR TAMPER LOCK TAMPER RELEASE TAB Figure 1:Tamper-Resistant Feature/Wiring 5193S D/5193S DT V—PLEX® ADDRESSABLE SMOKE DETECTOR SPECIFICATIONS • Heat Sensor: (Model 5193SDT): • Diameter(including base): 5.3 inches 135° F(57.2° C); Fixed Temperature Electronic Thermistors • Height(including base): 2.0 inches • Weight: 6.3 oz. • Operating Ambient Temperature Range: 32°to 100° F(0°to 38° C) • Agency Listing: UL-268 • Operating Humidity Range: • System Voltage Range: 7-14V 0 to 95% RH non-condensing • Standby Current(maximum @ 12V) • Storage Temperature Range: LED off: 1.2mA -4°to 158° F(-20°to 70°C) LED on: 2.8mA ACCESSORY(sold separately) To measure the detector's sensitivity, the SENS-RDR Infrared Sensitivity Reader tool (sold separately) should be used. It reduces testing time, simplifies sensitivity measurements and displays them precisely in terms of percent per foot obscuration. The SENS-RDR eliminates the need for magnets, voltmeters and ladders. \n�T7 • Mir • 411 - If Figure 2: Position of Reader .8 ORDERING 5193SD Addressable Photoelectric Smoke Detector 5193SDT Addressable Photoelectric Smoke Detector with Integral Heat Sensor Accessory sold separately: SENS-RDR Handheld Sensitivity Reader Automation and Control Solutions Honeywell Security&Communications Honeywell 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 ve193sDTio May 2009 www.honeywell.com ©2009 Honeywell International Inc.