HomeMy WebLinkAboutB15-0299_Vail Roof_Elec Permit App Support_1439566380.pdf
P.O. Box 373 . Vail, Colorado 81658 . P 970.845.5656 . F 970.845.7013 . www.ShaefferHyde.com
328 Mill Creek Circle Elec Service/Re-roof
#DRB150319
May 7, 2015
Detailed Roofing Scope of Work: 1. Tear off existing Cedar Shakes, felt and flashing. 2. Inspect the plywood for water damage, and replace as needed. 3. Install 1/2” Plywood over the entire cold roof system. Fasten plywood with nail at a rate of 36 nails per 4’x8’ sheet. 4. Install Grace Ice and Water Shield over entire pitched roof area, according to manufacturer’s specifications. Extend membrane up walls a minimum of 12” at roof-to-wall junctures. Use mastic as needed. 5. Install Versa-Shield over the Grace Ice & Water Shield to achieve a class “A” roof system. Extend the Versa-shield up walls a minimum of 6” at roof-to-wall junctures. 6. Install (Classic) DaVinci Shake, with 18” wide, laced, 30 pound 36” felt at each course. The DaVinci Shakes will be installed according to manufacturer’s specifications. Use starter and hip-and-ridge shingles as needed. The DaVinci Shake will be installed in a Standard Pattern and 10” reveal to the weather. Color will be Autum Blend. 7. Install 16 Ounce Copper Flashing including valleys, steps, endwall, pitched change and peak flashing. Install 16 Ounce Copper drip edge flashing at all eave and rake edges. 8. Install 16 Ounce Copper Counter Flashing at all roof to wall locations. 9. At all Ridge Vent locations, install the following; a. Install a layer of .5” plywood over the vertical battens. b. Install bird screen at the vent openings. c. Install 16 Ounce Copper Flashings, including, drip edge flashing at all eave and rake edges, sidewall flashing. d. Install “Grace” Ice and Water Shield over entire pitched ridge vent. e. Install Versa-Shield over the Grace Ice & Water Shield. f. Install DaVinci Classic Shakes as specified by the manufacturer. Install starter shingles as needed. Snow Fences/Snow Clips: 1. Install 2 pipe TRA Steel (Powder Coated) snow fence system (Type D-2HL deck mounted) at all locations indicated in the attached roof plan. The snow fence will be painted to match the DaVinci Shake as closely as possible. 2. Install Copper TRA Snow Clips (Type F) at all locations indicated above. Clips will be installed as recommended by the manufacturer with a double course at the eaves. 3. Structural engineering study of existing structure pending. Will provide results of that study as a deferred submittal.