HomeMy WebLinkAboutDRB140416_DRB140416 Application_1410463200.pdfDepartment of Community Development
75 South Frontage Road
Vail, CO 81657
Tel: 970-479-2128
www.vailgov.com
Development Review Coordinator
Application for Design Review
Sign Application
General Information: This application is required for any sign that is located within the Town of Vail. All signs require
Design Review approval. Applicable Vail Town Code sections can be reviewed on-line at www.vailgov.com under Vail
Information—Town Code On-line (Title 11 Signs). An application for Design Review cannot be accepted until all re-
quired information is received by the Community Development Department. Design Review approval lapses unless sign
is installed within one year of the approval.
Fee: $50 PLUS $1.00 per square foot of total sign area
Business/Building Name: ____
Number of proposed signs: Number of existing signs:
Length of business frontage: Height of sign(s) from grade:
Square Footage of Sign:
Other: ________________________________________________________________________________
Physical Address: ____________________________________________________________________
Parcel Number: ___________________________(Contact Eagle Co. Assessor at 970-328-8640 for parcel no.)
Property Owner: ____________________________________________________________________
Mailing Address: ____________________________________________________________________
___________________________________________ Phone: _________________________________
Owner’s Signature: __________________________________________________________________
Primary Contact/ Owner Representative: _________________________________________________
Mailing Address: ____________________________________________________________________
___________________________________________ Phone: _________________________________
E-Mail: _____________________________________Fax: ___________________________________
For Office Use Only:
Cash___ CC: Visa / MC Last 4 CC # _________ Exp. Date: ________ Auth # _________ Check # ___________
Fee Paid: __________________________________ Received From: ___________________________________
Meeting Date: ______________________________ DRB No.: ________________________________________
Planner: ___________________________________ Project No: _______________________________________
Zoning: ____________________________________ Land Use: ________________________________________
Location of the Proposal: Lot:________ Block:________ Subdivision:_______________________________________
Nov 2013
Free Standing Sign Hanging/Projecting Sign Window Sign Wall Sign
Business Sign Building Identification Subdivision Entrance Joint Directory Sign
Menu/Display Box Business Operation Sign Open/Closed Sign Sale Sign
Sign Program Gas Filled/Fiber Optic Temporary Site Development Sign
!!!!!!
September 10, 2014
!
Jonathan Spence, Planner
Town of Vail Community Development Department
75 S. Frontage Road
Vail, CO 81657
!
Re:
Sign application for Northside Grab & Go, located at 2271 N. Frontage Road West
(Parcel #2103-114-15-020)
!
Dear Jonathan:
!
Mauriello Planning Group is submitting this sign application for the new Northside Grab & Go
at the on behalf of Jim Pavelich. We are proposing one sign, Northside Grab & Go business
identification sign located over the front entry to the building. The sign is 20 sq. ft. and meets
the Town of Vail Sign Code Regulations.
!
The dimensions, lighting fixture, design, sign messaging, and materials, along with the photo
renderings of the sign and sign location are provided on the plans included with this submittal.
Thank you for your time and consideration on this matter. Should you have any questions,
please do not hesitate to contact me at 970.376.3318.
!
Sincerely,
Dominic F. Mauriello, AICP
Principal
PO Box 4777
Eagle, Colorado 81631
970.376.3318
www.mpgvail.com
D"
H"
PREPARED BY:
TYPE:
JOB NAME:
DATE:
CERTIFICATION: UL LISTED
FINISH-Five stage pretreatment process, coated with a
lead free TGI C polyester powder coat finish. White is
standard inside reflectors, Except #49-Galvanized, #62-
Anodized Bronze and #63-Iron Rust, Unless specified.
Custom colors and Marine are available upon request.
MOUNTING- 1/2” or 3/4” tapped hub is supplied. Top
or side mount available. Fixtures are pre-wired with 48”
or 96” leads. Available with cord or stem sets.
REFLECTOR- Spun from heavy gauge 1100-0
aluminum, ranging in thickness from .050 to .125.
Galvanized is from 20 gauge sheets. Copper is spun
from .040 gauge and 110 soft alloy.
LAMP HOLDERS- Accommodates Incandescent
medium base porcelain socket, copper shell with nicked
plate, rated 250V, 660W. Compact Fluorescent 4 pin
heat resistant thermoplastic socket accommodates
26/32W (Gx24q-3 base) and 42W (Gx24q-4 base). Twist
lock design provides for vibration and earthquake
resistance, rated 75W, 600V. High Intensity
Discharge (H.I.D.) medium base, 4KV pulse start
socket, rated 660W/600V. LED 10W. A minimum of
60,000 hours to 100,000 expected life depending on
installation location and ambient temperature.
1 Remote ballast 2INC max wattage 150W
Call factory for higher wattage
MODEL# D” H”
A807 7 7 ¾
A810 10 10
A812 12 12
A814 14 14
LIGHT SOURCE
LED
MODEL# FINISH INC CF1 HID1 W K V
MOUNTING OPT.
A807
100W
26W
35W,
50W
A810
150W
A812
A814
40-copper
w/ coat
41-black 42-dr. green
43-red
44-white
45-med. blue
46-yellow
48-polish alum.
49-galvanized 50-navy blue
51-arch. Bronze
52-patina
53-rust
54-stucco 55-sage
58-satin alum.
clear coat
59-coppertone
60-canal green
61-anod. charcoal
62-anod. bronze 63-iron rust
200W
26W,
32W,
42W,
35W,
50W,
70W,
100W
10W
3500
4000
5000
120
-Arm extension
-Post Mts & Pole
-Stem
-Cord2
-Cable & Chain
-Hub
12260 EAST END AVE. CHINO, CA 91710
PHONE: 877-999-1990
FAX: 877-999-1955
Model #Color Mounting Source Light Source Options Globes Accessories
A807
A810
A812
A814
40,41,42,
43,44,45
46,48,49,
50,51,52,
53,54,55,
57,58,59,
60,61,62,
63
E1,E2,E2S,E3,
E3A,E4,E4A,E5,
E6,E7,E8,E9,
E10,E11,E12,
E13,E18A,E19,
E20,E21,E22,
E23,E24,E25
INC
100W
150W
200W
200W
CF
26W*
26, 32 or 42W*
26, 32 or 42W*
26, 32 or 42W*
HID (MH & HPS)
35, 50W*
35, 50, 70, 100W*
35, 50, 70, 100W*
35, 50, 70, 100W*
SMSWL**-Small Swivel
LGSWL-Large Swivel
TRB-Turnbuckle & Cable
CBC-Back Plate Cover
SQ-Square Backplate
10W
10W
10W
10W
CL3-Clear 3"
CLT3-Clear Tempered***
FR3-Frosted 3"
FRT3-Frosted Tempered***
PR3-Prismatic 3"
PRT3-Prismatic Tempered***
GRXX-Grills
GU1-Guard 100W
GU2-Guard 200W
* See back cover for remote ballasts
** Available only on A807
*** For use with HID
A807/49/E1/49/SWL
2A807/42/E18A/42
A810/62/E1/62
A814/50/E4/50
A812/41/E11/41/GR12/43
LED
2
SIGN LIGHTS