HomeMy WebLinkAboutDRB140563_A6-5_1424821140.pdfRE: ROOF PLAN / SECTIONS
GRID
LINE
WOOD SIDING RE: SPEC (REFER TO
ELEVATIONS FOR LOCATIONS)
SLOPE
PER ROOF PLAN
3D DRAINAGE MEDIUM CONT. BEHIND SIDING TO
AIR VENT MATERIAL AT TOP OF WOOD SIDING
CONT. BUG SCREEN STAPLED TO SOFFIT
WRAPPED OVER AIR VENT MATERIAL TO
CREATE MIN 1/2" VENT AT TOP OF THE WALL.
SEE 1/A6.5 FOR
TYPICAL ROOF EAVE
NOTES
21.8°
7 1/2"
KNIFE PLATE RE: STRUCT.
PAINT ALL EXPOSED THROUGH BOLTS
RE:STRUCT.
3" HSS COLUMN WELDED TO B.O. BEAM & 7
1/2" X 7 1/2" X 1/2" STEEL BASE PLATE
WELDED TO KNIFE PLATE. NO COLUN OR
PLATE AT SIM. CONDITION. RE: STRUCT. &
SPEC
8X8 ANGLED WOOD
COLUMN. NO STRUT AT
SIM. CONDITION
RE: STRUCT.
STEEL BEAM. NO BEAM AT SIM.
CONDITION RE: STRUCT.
BIRDSMOUTH CUT RAFTER
KNIFE PLATE RE: STRUCT.
GRID
LINE
6X10 RAFTER TAIL ATTACHED
TO WOOD RAFTERS @ 48" O.C.
RE: STRUCTURAL DRAWINGS
DRIP FLASHING OVER FASCIA RE: SPEC
STANDING SEAM METAL ROOFING
RE: SPEC
5/8" PLYWOOD SHEATHING
6X10 WOOD RAFTER LAG
BOLTED TO EXTERIOR WALL -
LAG BOLTS TO BE COUNTER
SUNK AND PLUGGED
2X4 BLOCKING
PLYWOOD BLOCKING
EXTEND ROOF SHEATHING
TO EDGE OF ROOF
TYP. EXTERIOR WALL ASSEMBLY RE:
ELEVATIONS / SECTIONS
CANTILEVERED 2X6 T&G
DECKING
WORKING POINT
RE: ROOF PLAN
CONTINUOUS 2X8
FILL CAVITY W/ SPRAY FOAM
AND BLOWN-IN INSULATION
RE: SPEC
TYPICAL ROOF RAKE NOTES:
RE: ELEVATIONS FOR SIDING TYPE.
NOTE CONDITION MAY HAVE STONE,
METAL OR VERTICAL SIDING
RAFTERS PER STRUCTURAL DRAWINGS W/ CAVITY
FILLED W/ SPRAY FOAM AND BLOWN-IN INSULATION RE:
STRUCT./SPEC.
CUSTOM 5" ROUND GUTTER WITH
ROUND DOWN SPOUTS RE: SPEC
RE: ROOF PLANS FOR LOCATIONS
RE: ROOF PLAN / SECTIONS
GRID
LINE
DRIP EDGE FLASHING
RE: SPEC
STANDING STEAM ROOF
RE: SPEC RE: ROOF PLAN
FOR LOCATIONS
ICE AND WATER SHIELD OVER METAL
FLASHING PROVIDE 50% OVERLAP
(DOUBLE LAYER) FOR FIRST 4' UP EAVE
2X6 DOUG-FIR DECKING
2X6 CEDAR FASCIA RE: ROOF
PLAN FOR LOCATIONS
6x10 ROUGH SAWN DOUG-FIR RAFTER TAILS @
48" O.C. RAFTERS SISTERED TO TJI RAFTERS
TYP.
EXTEND ROOF SHEATHING TO EDGE OF EAVE
PLATE HEIGHTS AT SECTIONS AND
ELEVATIONS ARE PER A BEVEL PLATE
(RAFTER NOT SEAT CUT)
RE: ROOF PLAN
3D DRAINAGE MEDIUM CONT. BEHIND SIDING TO
AIR VENT MATERIAL AT TOP OF WOOD SIDING
SMART MEMBRANE VAPOR BARRIER
TYP. RE: SPEC
TYPICAL ROOF EAVE NOTES:
GRID
LINE
INSULATION RE: SPEC & COVER SHEET
SIDING RE: SPEC
(REFER TO ELEVATIONS FOR
LOCATIONS)
PLATE HEIGHTS AT SECTIONS AND
ELEVATIONS ARE PER A BEVEL PLATE
(RAFTER NOT SEAT CUT)
SLOPE
PER ROOF PLAN
3D DRAINAGE MEDIUM CONT. BEHIND SIDING TO
AIR VENT MATERIAL AT TOP OF WOOD SIDING
CONT. BUG SCREEN STAPLED TO SOFFIT
WRAPPED OVER AIR VENT MATERIAL TO
CREATE MIN 1/2" VENT AT TOP OF THE WALL.
SEE DETAIL 1/A6.1 FOR
TYPICAL ROOF EAVE NOTES
GRID
LINE
STANDING STEAM ROOF
RE: SPEC
2X6 DOUG-FIR DECKING
6x10 ROUGH SAWN DOUG-FIR
RAFTERS RE: RCP
LEDGER RE: STRUCT
WOOD SIDING RE: SPEC
ROOF SHEATHING
SLOPE
PER ROOF PLAN
3D DRAINAGE MEDIUM CONT. BEHIND SIDING TO
AIR VENT MATERIAL AT TOP OF WOOD SIDING
SMART MEMBRANE VAPOR BARRIER
TYP. RE: SPEC
CONT. BUG SCREEN STAPLED TO SOFFIT
WRAPPED OVER AIR VENT MATERIAL TO
CREATE MIN 1/2" VENT AT TOP OF THE WALL.
T.O. ROOF
RE: SECTIONS
SLOPE
PER ROOF PLAN
PRE-FABRICATED METAL RIDGE CAP
HIGH TEMPERATURE ICE AND WATER
SHIELD CONT. OVER ENTIRE ROOF
PROVIDE BLOCKING & 1X CEDAR TRIM TO
CONCEAL HANGERS & ATTACHMENTS @
EXPOSED LOCATIONS
GRID
LINE
SEE 3/A6.5 FOR TYPICAL
ROOF RAKE NOTES
6X10 WOOD RAFTER LAG
BOLTED TO EXTERIOR WALL -
LAG BOLTS TO BE COUNTER
SUNK
TYPICAL STONE VENEER
ASSEMBLY
RE: 1/A6.1
(3) 2X8 BLOCKING BUILD UP
RE: ROOF PLAN
WORKING POINT
RE: ROOF PLAN
VARIES PER OVERHANG
CONT. BUG SCREEN STAPLED TO
RAFTER WRAPPED OVER AIR VENT
MATERIAL TO CREATE MIN 1/2" VENT AT
TOP OF THE WALL
GRID
LINE
4 7/8"
5/8" TYPE 'X' GWB WITHIN 4' OF PROPERTY LINE
PROPOSED FUTURE PROPERTY LINE
SEE 3/A6.5 FOR TYPICAL
ROOF RAKE NOTES
*5 1/2"
@ SIM
GRID
LINE
5/8" PLYWOOD SHEATHING
I-JOIST RAFTER @ 24" O.C. W/
INSULATION RE: STRUCT./SPEC.
PROVIDE HIGH TEMP ICE & WATER SHIELD
CONT. @ ROOFS. RE: SPEC
ROOFING RE: ROOF PLANS
CONT. BUG SCREEN STAPLED TO SOFFIT
WRAPPED OVER AIR VENT MATERIAL TO
CREATE MIN 1/2" VENT AT TOP OF THE
WALL.
1/2"
1/2"
WOOD SIDING RE: ELEVATIONS FOR
TYPE / NOTES AND FINISH SCHEDULE
3D DRAINAGE MEDIUM CONT. BEHIND TO
AIR VENT MATERIAL AT TOP OF WOOD
SIDING. HOLD DOWN 1/2" FROM B.O.
SIDING
GRID
LINE
GRID
LINE
PFSM DRIP FLASHING TO
MATCH ROOFING OVER
2X10 FASCIA
STANDING SEAM METAL
ROOFING RE: SPEC
FILL CAVITY W/ SPRAY FOAM
AND BLOWN-IN INSULATION
RE: SPEC
BLOCKING RE: STRUCT.
WOOD SIDING RE: SPEC (REFER TO
ELEVATIONS FOR LOCATIONS)
PROVIDE 5/8" TYPE 'X' RATED DRYWALL
WITHIN 4' OF PROPERTY LINE
EXTEND ROOF SHEATHING
TO WALLBOARD
STANDING SEAM METAL
ROOFING RE: SPEC
PROPOSED FUTURE
PROPERTY LINE
FLASHING
GRID
LINE
STANDING SEAM METAL ROOF
RE: SPEC
1X6 T&G DECKING
ICE AND WATER SHIELD
CONT. UP WALL 36" MIN. RE: SPEC
RUN METAL FLASHING UP WALL MIN 6"
AND OUT OVER ROOF MIN 6"
LAP SELF ADHERING BITUTHANE
FLASHING OVER METAL WALL FLASHING
LAP AIR & WATER INFILTRATION
BARRIER OVER BITUTHANE FLASHING
PLYWOOD SHEATHING RE: STRUCT OVER
SLEEPERS TO CREATE WIRE CHASE FOR
EXTERIOR LIGHT FIXTURES AND ALIGN W/
4X DECKING RE: RCP
EXTERIOR
EXTERIOR
INTERIOR
INTERIOR
TYPICAL COPPER
SIDING ASSEMBLY
RE: 3/A6.4
TYPICAL COPPER SIDING ASSEMBLY
RE: 3/A6.4
GRID
LINE
Scale
Drawn by
Checked by
US Mail Only: P. O. Box 2378
Physical / Fedex: 210 Edwards
Village Blvd, Bldg A Suite A103
Edwards, Colorado 81632-2378
(970) 926 4301, Fax: 926 4364
hans@berglundarchitects.com
www . berglundarchitects.com
Issue Date
REVISION
As indicated
12/12/2014 3:19:19 PM
A6.5
ROOF
DETAILS
AG
HB
GORE CREEK RESIDENCES
12/15/14
223 BEAVER DAM RD, VAIL, CO 81657 VAIL
VILLAGE FILING 1, BLOCK 7, LOT 39
FINAL DRB SET
No. Revision Date
Revision
Description
1 1/2" = 1'-0"
2
ROOF DETAIL @ UPPER EAVE
1 1/2" = 1'-0"
3
ROOF DETAIL @ TYPICAL ROOF RAKE
1 1/2" = 1'-0"
1
ROOF DETAIL @ TYPICAL EAVE
1 1/2" = 1'-0"
4
ROOF DETAIL - EAVE W/ NO OVERHANG
1 1/2" = 1'-0"
5
ROOF DETAIL @ UNIT B MUDROOM
ROOF RIDGE
1 1/2" = 1'-0"
6
ROOF DETAIL @ TYPICAL ROOF RAKE W/
STONE VENEER
1 1/2" = 1'-0"
7
ROOF DETAIL @ ROOF RAKE @
PROPOSED FUTURE PROPERTY LINE
6" = 1'-0"
8 BUG SCREEN DETAIL @ ROOF EAVE
1 1/2" = 1'-0"
9 ROOF DETAIL @ PROPERTY LINE
1 1/2" = 1'-0"
10 FRONT ENTRY ROOF DETAIL @ UNIT A
DRB
APPROVED
2/18/2015 12:00:00 AM