HomeMy WebLinkAboutDRB150036_L-3 Cut Sh_1423507740.pdfCatalog #
Project
Comments
Prepared by
Type
Date
HALO
SPECIFICATION FEATurES
dESCrIPTION
The Halo RL4 series is a retrofit LED Baffle-Trim Module for 4"
aperture recessed downlights. The RL4 is designed for use with
compatible 4" housings. The RL4 integral LED driver is dimmable
at 120 volts. The RL4 lens provides uniform illumination and wet
location listing. The RL4 die-cast construction makes any housing
AIR-TITE for added HVAC savings and code compliance.
MECHANICAL
Module-Trim
• Module construction includes
LED, heat sink, reflector, lens,
baffle and trim ring
• Durable die-cast aluminum
construction
• Regressed baffle
• Heat sink designed to conduct
heat away from the LED
keeping the junction
temperatures below specified
maximums, even when
installed in insulated ceiling
environments
• Halo finish options
- Matte White paint finish (WH)
- Satin Nickel plated finish (SN)
Lens
• Regressed lens
• Impact-resistant polycarbonate
• Convex form for lamp-like
appearance
• High lumen transmission
• Diffusing for even illumination
MOuNTING
Friction Blades
• Precision formed spring blades
secure module to compatible
housings.
• Friction blade design allows
the RL4 to be installed in any
position within the housing
aperture (360 degrees).
Housing Compatibility
See Housing Compatibility
section.
LEd
• Color Temperature (CCT)†
Options: 2700K, 3000K, and
3500K
• Color Rendering Index (CRI)†
Options: 80 and 90
• LED is a chip on board design
consisting of a multiple LED
package with proximity
phosphor coating to create
one virtual white light
source for a productive
“cone of light”
ELECTrICAL
Power Connections
• LED connector is a non-screw base luminaire disconnect
offering easy installation with the matching Halo H995 Series
housings.
• LED Connector meets California
Title-24 high-efficacy luminaire
requirement for a non-screw
base socket, and where
required to qualify as a
high-efficacy luminaire.
• The included E26 medium
screw-base Edison adapter
provides easy retrofit of
incandescent housings (see
Housing Compatibility).
Ground Connection
• Separate grounding cable
included on the RL4 module
for attachment to the housing
during installation.
LEd driver
• Dimmable driver is a 120 Volt,
high efficiency, electronic
power supply providing DC
power to the LED.
• Driver meets FCC EMI/RFI
Consumer Level limits for use
in residential and commercial
installations.
• Driver features high power
factor, low THD, and has
integral thermal protection in
the event of over temperature
or internal failure.
• Driver mounts externally to
the module, allowing future
replacement, if needed.
dimming
• The Halo RL4 LED is designed for dimming capability to
10% in normal operation
with standard 120V LED-Rated,
electronic low voltage, and
many incandescent dimmers.
The LED module may also
dim to 5% nominal using
dimmers with low end trim
adjustment. (Consult dimmer
manufacturer for dimmer
details. Note, some dimmers
require a neutral in the wallbox.)
Warranty
Cooper Lighting provides a five
year limited warranty on the RL4
LED.
COMPLIANCE
Labels
• UL/cUL Listed 1598 Luminaire
(with listed housings)
• UL/cUL Listed for Damp
Location
• UL/cUL Listed for Wet
Location – Shower Applications
• IP65 Ingress Protection rated
• May be installed in housings
in direct contact with air-
permeable insulation** and
combustible material
Qualification
• ENERGY STAR® qualified
residential and commercial*
• Can be used for State of
California Title 24 high efficacy
luminaire compliance*
• Can be used for Washington
State Energy Code (WSEC)
and International Energy
Conservation Code (IECC) high efficacy luminaire
compliance
IC and AIr-TITE™
Certified under ASTM-E283
and listed UL/cUL 1598 with
compatible housings, may
be used to meet insulated
ceiling** and restricted air-flow
requirements such as:
• Washington State Energy
Code (WSEC)
• International Energy
Conservation Code (IECC)
• New York State Energy
Conservation Construction
Code (NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
RL460SN†
Satin Nickel
80CRI
2700K, 3000K and 3500K
90CRI
2700K, 3000K and 3500K
4-Inch LED
Recessed Retrofit
Module-Trim
RL460WH†
White
FOr uSE IN
INSuLATEd CEILING
ANd NON-INSuLATEd
CEILING rATEd
HOuSINGS
HIGH EFFICACy LEd
WITH INTEGrAL
drIvEr - dIMMABLE
ADV131345
November 15, 2013 10:57 AM
* Qualified and compliant. Refer to ENERGY
STAR® Qualified Products List and CEC (T24)
Appliance Database for listings.
** Not for use with housings in direct contact with spray foam insulation.† See ordering information table for available models.
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500K
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500K
2700K nominal
2700K
2725
3000K 3500K 4100K 5000K 6500K
3000K nominal
2700K
3045
3000K 3500K 4100K 5000K 6500K
3500K nominal
2700K
3465
3000K 3500K 4100K 5000K 6500K
4000K nominal
2700K
3985
3000K 3500K 4100K 5000K 6500K
RL4 Series
www.cooperlighting.com
ENErGy dATA
LED Lighting Data RL460WH827PK
Lumens: 575
Correlated Color Temperature (CCT): 2700K
Color Rendering Index (CRI, Ra): 81
Lumens per watt: 54
LED Lighting Data RL460WH830PK
Lumens: 600
Correlated Color Temperature (CCT): 3000K
Color Rendering Index (CRI, Ra): 81
Lumens per watt: 57
LED Lighting Data RL460SN827PK
Lumens: 525
Correlated Color Temperature (CCT): 2700K
Color Rendering Index (CRI, Ra): 81
Lumens per watt: 50
LED Lighting Data RL460SN830PK
Lumens: 550
Correlated Color Temperature (CCT): 3000K
Color Rendering Index (CRI, Ra): 81
Lumens per watt: 52
Min. Starting Temp
-30°C (-22°F)Sound Rating: Class A
EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)
Maximum IC (Insulated Ceiling) Ambient Continuous Operating Temperature: 25°C (77°F)
Input Frequency:50/60Hz Input Voltage: 120V
THD: <20%Power Factor: >0.90
Input Power:
9.0W - 10.5W
(per CRI and CCT)
Input Current:
0.075A - 0.0875A
(per input power)
Driver-Safety Agency Approvals: UL60950-1 Recognized, LPS outputUL8750 Compliant
Maximum Non-IC (NON-Insulated Ceiling)
Ambient Continuous Operating Temperature:
40°C (104°F)
Energy Data (Typical)
LIGHTING FACTS
rL460WH827PK2700K Source
rL460SN827PK2700K Source
rL460WH930PK3000K Source rL460WH935PK3500K Source
rL460WH830PK3000K Source rL460WH835PK3500K Source
rL460SN830PK3000K Source
RL4 Series
Note: Specifications and Dimensions subject to change without notice.
visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049www.cooperlighting.com
OrdErING INFOrMATION
RL4 LED ModuleSAMPLE NUMBER: RL460WH827PK
Complete unit includes RL4 LED and Halo H995 series LED housing, or compatible 4” E26 screw based housing (see: Housing Compatibility).
RL4 LED and housing to be ordered separately.
RL460WH Models
80 CRI
RL460WH827PK= 4” LED Retrofit Module with regressed baffle and lens, White Baffle and Ring, 80 CRI, 2700KRL460SN827PK= 4” LED Retrofit Module with regressed baffle and lens, Satin Nickel Baffle and Ring, 80 CRI, 2700KRL460WH830PK= 4” LED Retrofit Module with regressed baffle and lens, White Baffle and Ring, 80 CRI, 3000KRL460SN830PK= 4” LED Retrofit Module with regressed baffle and lens, Satin Nickel Baffle and Ring, 80 CRI, 3000KRL460WH835PK= 4” LED Retrofit Module with regressed baffle and lens, White Baffle and Ring, 80 CRI, 3500K
90 CRI
RL460WH927PK= 4” LED Retrofit Module with regressed baffle and lens, White Baffle and Ring, 90 CRI, 2700KRL460SN927PK= 4” LED Retrofit Module with regressed baffle and lens, Satin Nickel Baffle and Ring, 90 CRI, 2700KRL460WH930PK= 4” LED Retrofit Module with regressed baffle and lens, White Baffle and Ring, 90 CRI, 3000KRL460SN930PK= 4” LED Retrofit Module with regressed baffle and lens, Satin Nickel Baffle and Ring, 90 CRI, 3000KRL460WH935PK= 4” LED Retrofit Module with regressed baffle and lens, White Baffle and Ring, 90 CRI, 3500K
Accessories (order separately)
HE26LED=Replacement screw base adapter (one included with unit)
LED Housing
Series
H995ICAT= 4” Dedicated LED Insulated Ceiling, AIR-TITE New Construction Housing with LED luminaire connector (high efficacy compliant)H995RICAT= 4” Dedicated LED Insulated Ceiling, AIR-TITE Remodel Housing with LED luminaire connector (high efficacy compliant)
HOuSING COMPATIBILTy - E26 SCrEW BASE rETrOFIT
rL460WH / rL460SN
UL Listed
UL/cUL Listed for installation in the following Halo
and All-Pro 4” recessed E26 screw based and LED
dedicated housings.
All-Pro™ET400ATSB, ET400RATSB, EI400ATSB
Halo®H99ICAT, H99RTAT, H99TAT, H995ICAT, H995RICAT
UL Classified
UL Classified for retrofit in the following 4” recessed
E26 screw based housings.
Utilitech CR04ICAT
Thomas®PS4
Lithonia Lighting®L3, L3R
Commercial Electric™HBR2000B
Juno®TC1, TC1R
Progress Lighting®P830-TG, P832-TG
Juno®, Lithonia Lighting®, Thomas® Lighting, Progress® Lighting, Utilitech, and Commercial Electric™ and their product brand names, where identified above, are tradenames or trademarks of each respective company and Cooper makes no representations on these trademarks.
dIMENSIONS
5.125"[130.18mm]
3"[76.24mm]