HomeMy WebLinkAboutDRB150273_DRB150273 Application_1436205360.pdfInstallation/Application
Hot Air WeldMechanicallyFastenedFully Adhered
Refer to JM TPO application guides and detail drawings for instructions.
Packaging and Dimensions
Roll Widths 5' (1.52 m)8' (2.44 m)10' (3.05 m)
Roll Lengths 100' (30.48 m)
Roll Coverage 500 ft² (46.45 m²)800 ft² (74.32 m²)1000 ft² (92.90 m²)
Rolls per Pallet 8
Pallet Weight 1384 lb (627.8 kg)2200 lb (997.9 kg)2760 lb (1251.9 kg)
Pallets per Truck*36 24 16
Producing Location Scottsboro, AL
*Assumes 48' flatbed truck and does not reflect pallets of accessories or impact of mixed sizes.
RS-8633 10-14 (Replaces 9-14)
Meets or exceeds the requirements of ASTM D 6878
Features and Components
Thickness Over Scrim: Optimized and tested on a continual basis with a state-of-the-art thickness gauge to verify that the thickness valued by our customers is incorporated into the sheet.
One of the Widest Melt Windows: Promotes better welds over a wider variety of speeds and temperatures, and leads to a softer, more flexible and workable sheet.
Reinforced fabric scrim layer and top-ply thickness: Lends to durable physical properties including:
• Long-term weathering, UV resistance and heat-aging properties
• High breaking and tearing strength
Optimized TPO formulation: delivers high-performance ozone resistance, cool roof reflectivity and overall weather resistance.
Energy and the Environment
Standard Reflectivity:Emissivity:
CRRC®Initial 0.77 0.87
3 Yr. Aged 0.70 0.86
CA Title 24 Pass 0.77 0.87
ENERGY STAR®Initial 0.78 0.87
3 Yr. Aged 0.68 Not Tested
LEED®
SRI 101
Recycled Content Post-consumer: 0% Post-industrial: 5%
Results shown are for the initial reflectivity and emittance for white membranes unless otherwise indicated; emissivity values for California Title 24 are tested per ASTM C 1371; LEED emissivity values are tested per ASTM E 408.
Peak Advantage® Guarantee Information
Product Guarantee Term
JM TPO 60 5, 10, 15, or 20 years
Codes and Approvals
Component
M Membrane
Single Ply
System Compatibility This product may be used as a component in the following systems. Please reference product application for specific installation methods and information. Multi-PlyBUR APP SBS
Single PlyTPO PVC EPDM
HA CA CA HW HA CA HW SA MF FA MF FA MF FA BA
Do not use with Multi-Ply systems Compatible with the selected Single Ply systems above
Key: HA = Hot Applied CA = Cold Applied HW = Heat Weldable SA = Self Adhered MF = Mechanically Fastened FA = Fully Adhered BA = Ballasted
Refer to the Safety Data Sheet and product label prior to using this product.
The Safety Data Sheet is available by calling (800) 922-5922 or on the Web at
www.jm.com/roofing.
Colors
Grey*White Tan*
* Grey and Tan lead times are subject to availability and may require
an upcharge for smaller projects.
JM TPO – 60 MIL
Thermoplastic Polyolefin Membrane
Meets or exceeds the requirements of ASTM D 6878
RS-8633 10-14 (Replaces 9-14)
Refer to the Safety Data Sheet and product label prior to using this product.
The Safety Data Sheet is available by calling (800) 922-5922 or on the Web at
www.jm.com/roofing.
Tested Physical Properties
Physical Properties ASTM Test Method Standard for ASTM D 6878 (Min.)
JM TPO – 60 mil
MD* XMD**StrengthBreaking Strength, min, lbf (N)D 751 220 (976)411 (1,828)388 (1,726)
Elongation at Break, min %D 751 15 27 27
Tearing Strength, min, lbf (N)D 751 45 (200)92 (409)178 (792)
Factory Seam Strength, min, lbf (N)D 751 66 (290)112 (498)LongevityThickness, min, in.D 751 +/- 10% from Nominal 0.060 (Nominal)
Thickness Over Scrim, min, in. (mm)D 7635 0.015 0.027 (0.686)
Water Absorption, max, %D 471 3.0 0.11
Brittleness Point, max, -40°F D 2137 No Cracks Pass
Ozone Resistance D1149 No Cracks Pass
Heat Aged PerformanceProperties after Heat Aging @ 240°F D 573 Pass/Fail Pass
Breaking Strength, % (after aging)D 751 90 >90 >90
Elongation, % (after aging)D 751 90 >90 >90
Tearing Strength, % (after aging)D 751 60 >60 >60
Weight Change, max, % (after aging)D 751 ±1.0 0.19
Linear Dimensional Change, max, % (after 6 hrs @ 158°F)D 1204 ±1.0 <0.1
Weather PerformanceAccelerated Weathering, min G 151 & G 155 10,080 kj/m2 • nm @ 340 nm (4,000 hrs @ 0.70 W)>20,160 kj/m2
(>8,000 hrs)
Cracking (@ 7x magnification)G 155 No Cracks Pass
*MD = Machine Direction**XMD = Cross-Machine Direction
Note: All data represents tested values.
Supplemental Testing
Physical Properties ASTM Test Method Standard for ASTM D 6878 (Min.)JM TPO – 60 mil Result
Dynamic Puncture D 5635 N/A Pass @ 25 Joules
Static Puncture D 5602 N/A Pass @ 44 lb (20 kg)
Impact Resistance of Bituminous Roofing Systems D 3746 N/A Pass - minor indentations
Reflectance C 1549 N/A 78%
Emittance C 1371 N/A 0.87
Resistance of Synthetic Polymer Material to Fungi G 21 N/A 0 rating
Puncture Resistance (FTMS 101C, Method 2031)N/A N/A 363 lb (165 kg)
Moisture Vapor Transmission E 96 N/A 0 g/m2 per 24 hours
Hydrostatic Resistance, Mullen D 751 N/A 474 PSI (3268 kPa)
JM TPO – 60 MIL
Thermoplastic Polyolefin Membrane