HomeMy WebLinkAboutDRB150443_stoneterra product specifications_1443109620.pdf
815 NE 172nd Ave., Vancouver, WA. 98684
360-694-0141 Office * 800-377-3877 Toll Free * 360-694-0281 Fax
www.stoneterra.net
STONETERRA PRODUCT SPECIFICATIONS
Block units shall be StoneTerra Retaining Wall units as produced by a licensed
manufacturer. Full, standard grade StoneTerra blocks shall weigh at least 1700 lbs. and
have consistent measure of 24” x 24” x 48” long. Blocks shall be of the interlocking design.
Full Stone Terra blocks shall have two round columnar male keyways equidistant from the
ends and sides to provide maximum shear capacity. The blocks have a male key / female
combination that allows for built-in interlock. Keyway system automatically establishes
appropriate setback.
Blocks shall be manufactured with a quarried rock architectural finish and as required by
project specs. Color of the units shall be concrete gray and may vary slightly. A concrete
stain may be applied after installation, if specified.
Each StoneTerra block shall be furnished with a 7-strand galvanized steel (270Kpa) loop
lifting eye located in the center of the block relative to the center of mass. Blocks shall be
StoneTerra retaining wall units as produced by a licensed manufacturer.
Manufacturers Representative: StoneTerra shall offer the services of a field representative
to assist the contractor in the startup of the project. Installation shall be in accordance with
the manufacturer’s installation guidelines.