HomeMy WebLinkAboutB17-0081_L7 BDR_1494884400.pdfHold mulch grade 1" below edge of walk. edging or curb.
NOTE
Ball Dia. + 12"
Concrete Curb, edging or
sidewalk
Prune all damaged or
dead wood after planting
and mulching
Set shrub at grade grown in container or
grown in nursery. Set top of Juniper
rootball to finish grade of mulch.
Apply specified mulch to
4" depth.
Score container rootbals
with encircling roots.
Remove container. Place
rootball on undisturbed soil.
2
3 backfill, 1
3 compost
mixture. Staking for evergreen trees 12' and taller: provide 3) Nylon
webbing strap collar, heavy duty. Do not twist. Straps
should have clearance from the trunk so as not to have
girding effect. Space evenly. Provide 2" clearance
minimum between the trunk and the strap eyes. Remove
three years after installation.
Do not cut leader. Prune damaged or dead
wood after planting and staking. Keep shape
typical of species. Do not prune lower branches.
Guy wires: provide 3 equidistant
around tree. Keep clear of
branches to prevent rub damage.
Finish Grade
Existing undisturbed subgrade
8. Provide tree stakes as described above. Space evenly. If
more than three stakes are required, provide the
appropriate number.
9. Drive stakes into undisturbed soil, keeping the tops even.
10. Build a 4" water saucer 6" minimum from the edge of
the root ball with compost material. Inside of Saucer shall
not cover the root ball.
11. Provide 4" depth of bark nuggets, 2-4" diameter for area
within the water saucer. Leave a 4" diameter void around
the base of the tree.
4"
Water Saucer
6" Min.
Leave this area low for
planting (see Plan for
proposed planting and soil
preparation requirements).
Compost
2 3
Backfill, 1
3 compost mixture.
1. Measure height of the tree ball (Ht.)
2. Dig a tree pit twice the root diameter (Width), and shallower than its Ht. depending on
the size of the root ball (X): 60" diameter root balls and larger should be 6-12" above natural
grade; 2-3" caliper trees should be 2-6" above natural grade.
3. Set the root ball on undisturbed soil.
4. Remove twine, burlap, and baskets from top 1
3 of root ball.
5. Fill pit with 2
3 backfill and 1
3 compost. No rocks larger than baseball size are permitted.
Foot pack in 6" lifts.
6. Water thoroughly, to the point of saturation, removing all air pockets from backfill
material. Utilize a long metal pipe watering wand. Do not fertilize at time of planting.
7. Tree shall be planted vertically and maintained throughout construction. Any site
retaining above or below the tree shall be provided as necessary and shall be outside of the
drip line of the tree. Boulder retaining shall match the other site retaining. For steep slopes,
refer to Evergreen Tree Planting on Slope Detail.
Ht.
Width X"
4" void around
base of tree
Existing undisturbed subgrade
Existing undisturbed subgrade
Evergreen Tree
Finish Grade
Approved tree strap. Do not
twist. Maintain a minimum of 2"
clearance between the strap eyes
and the trunk.
1. Create a level planting area by retaining on either the downhill side of the tree location or
the uphill side (site conditions may require both). Account for planting the tree above grade
(see note #3). When laying out the retaining, account for stake locations between it and the
root ball (see note #12)
2. Tree shall be planted vertically. Any site retaining above or below the tree shall be
provided as necessary and shall be outside of the drip line of the tree. Boulder retaining
shall match the other site retaining. For steep slopes, refer to Evergreen Tree Planting on
Slope Detail.
Ht.
Width
X"
Existing undisturbed subgrade
Existing Grade
Level of Backfill
4" void around
base of tree
Water Saucer
Boulder
Retaining
Boulder
Retaining
Boulder
Retaining
4"
6" Min.
Existing undisturbed subgrade
Existing undisturbed subgrade
3) Nylon webbing strap collar, heavy duty. Do not twist.
Straps should have clearance from the trunk so as not to
have girding effect. Space evenly. Provide 2" clearance
minimum between the trunk and the strap eyes.
Guy wires: provide 3 equidistant
around tree. Keep clear of
branches to prevent rub damage.
6" Min.
Finish Grade
Finish Grade
Finish Grade
Finish Grade
Finish Grade
Finish Grade
Approved tree strap. Do not
twist. Maintain a minimum of 2"
clearance between the strap eyes
and the trunk.
24"
Hold mulch grade 1" below edge of walk. edging or curb.
NOTE
Ball Dia. + 12"
Concrete Curb, edging or
sidewalk
Prune all damaged or
dead wood after planting
and mulching
Set shrub at grade grown in container or
grown in nursery. Set top of Juniper
rootball to finish grade of mulch.
Apply specified mulch to
4" depth.
Score container rootbals
with encircling roots.
Remove container. Place
rootball on undisturbed soil.
2
3 backfill, 1
3 compost
mixture.
P.O. Box 1871 Avon
Colorado
81620
(970)
390-6550 ric@fieldscape.net
c
Issue Date
Sheet:
Of: eight
L7
Site Details
The Beaver
Dam
Residences
Lot 9, Block 2, Vail Village
Filing 3, 354 Beaver
Dam
Road,
Vail,
Colorado Copyright
Fieldscape Incorporated
All Rights Reserved
This document, and the ideas and
designs incorporated herein, as an
instrument of professional service, is
the property of Fieldscape
Incorporated and is not to be used,
in whole or in part, for any other
project without the written
authorization of Ric Fields
T.O.V. Conceptual
June 20, '16
Review Shrub Planting Detail
N.T.S. 701
Evergreen Tree Planting Detail
N.T.S.
702
Deciduous Tree Planting Detail
N.T.S.
703
Shrub Planting Detail
1"=1'-0"
704
T.O.V. Aug. 11, '16
T.O.V. Final Review Aug. 29, '16
Mar. 1, '17
TOV DRB
Revisions
Ditch Wattle Detail
N.T.S. 705
TOV Building
Permit Mar. 31, '17
05/15/17