The URL can be used to link to this page

Home My WebLink Aboutequip submittal.pdf FIRE SPRINKLER PROTECTION SYSTEM VAIL FIRE STATION #1 RENOVATION 4116 COLUMBINE DRIVE VAIL, CO 81657 SUBMITTAL SHEETS TABLE OF CONTENTS 1. SPRINKLER PIPE AND FITTINGS 2. SPRINKLER HEADS 3. WET PIPE RISER 4. HANGER MATERIAL AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 3 Copper Water Tube continued U.S. customary units in this document are the standard; the metric units are provided for reference only. The values stated in each system are not exact equivalents. DIMENSIONAL DATA – COPPER WATER TUBE – TYPE “K” TYPE “K” Hard Drawn: 20-ft. (6.1m) Straight Lengths Soft Annealed: 20-ft. (6.1m) Straight Lengths, or 40-ft. (12.2m) and 60-ft. (18.3m) Length Coils (to and including size 1 1/2) Usage: For underground service and general purpose plumbing and heating installations under severe conditions. Tolerances Hard Drawn Soft Annealed (Hard Drawn Only) Outside Tubing OD Nominal Wall Weight Bursting Safe Working Bursting Safe Working Nominal Diameter Thickness Per Foot PressureA PressureB PressureA PressureC Water Tube Min. Max. Size (In Inches) Inch (mm) Inch (mm) Inch (mm) Inch (mm) Lb (kg) psi (bars) psi (bars) psi (bars) psi (bars) 1/4 0.375 (9.53) 0.373 (9.47) 0.376 (9.55) 0.035 (0.89) 0.145 (0.07) N/A N/A 1612 (111) N/A N/A 913 (63) 3/8 0.500 (12.70) 0.497 (12.62) 0.501 (12.73) 0.049 (1.24) 0.269 (0.12) N/A N/A 1675 (115) N/A N/A 960 (66) 1/2 0.625 (15.88) 0.622 (15.80) 0.626 (15.90) 0.049 (1.24) 0.344 (0.16) 9840 (678) 1337 (92) 4535 (313) 758 (52) 5/8 0.750 (19.05) 0.747 (18.97) 0.751 (19.08) 0.049 (1.24) 0.418 (0.19) N/A N/A 1104 (76) N/A N/A 626 (43) 3/4 0.875 (22.23) 0.872 (22.15) 0.876 (22.25) 0.065 (1.65) 0.641 (0.29) 9300 (641) 1278 (88) 4200 (290) 724 (50) 1 1.125 (28.58) 1.122 (28.50) 1.127 (28.63) 0.065 (1.65) 0.839 (0.38) 7200 (496) 982 (68) 3415 (235) 557 (38) 1 1/4 1.375 (34.93) 1.372 (34.85) 1.377 (34.98) 0.065 (1.65) 1.040 (0.47) 5525 (381) 797 (55) 2800 (193) 452 (31) 1 1/2 1.625 (41.28) 1.621 (41.17) 1.627 (41.33) 0.072 (1.83) 1.360 (0.62) 5000 (345) 742 (51) 2600 (179) 420 (29) 2 2.125 (53.98) 2.121 (53.87) 2.127 (54.03) 0.083 (2.11) 2.060 (0.93) 3915 (270) 652 (45) 2235 (154) 370 (26) 2 1/2 2.625 (66.68) 2.621 (66.57) 2.627 (66.73) 0.095 (2.41) 2.930 (1.33) 3575 (246) 597 (41) N/A N/A 338 (23) 3 3.125 (79.38) 3.121 (79.27) 3.127 (79.43) 0.109 (2.77) 4.000 (1.81) 3450 (238) 578 (40) N/A N/A 328 (23) 3 1/2 3.625 (92.08) 3.621 (91.97) 3.627 (92.13) 0.120 (3.05) 5.120 (2.32) N/A N/A 549 (38) N/A N/A 311 (21) 4 4.125 (104.78) 4.121 (104.67) 4.127 (104.83) 0.134 (3.40) 6.510 (2.95) 3415 (235) 540 (37) N/A N/A 306 (21) 5 5.125 (130.18) 5.121 (130.07) 5.127 (130.23) 0.160 (4.06) 9.670 (4.39) 3585 (247) 517 (36) N/A N/A 293 (20) 6 6.125 (155.58) 6.121 (155.47) 6.127 (155.63) 0.192 (4.88) 13.900 (6.30) 3425 (236) 520 (36) N/A N/A 295 (20) 8 8.125 (206.38) 8.119 (206.22) 8.127 (206.43) 0.271 (6.88) 25.900 (11.75) 3635 (251) 553 (38) N/A N/A 314 (22) 10 10.125 (257.18) 10.119 (257.02) 10.127 (257.23) 0.338 (8.59) 40.300 (18.28) N/A N/A 553 (38) N/A N/A 314 (22) 12 12.125 (307.98) 12.119 (307.82) 12.127 (308.03) 0.405 (10.29) 57.800 (26.22) N/A N/A 555 (38) N/A N/A 314 (22) Note: Information and data contained in these charts, as taken from ASTM Specifications B 88. Rated internal pressure for copper water tube based on the strength of the tube alone and applicable to systems using suitable mechanical joints. A Based on actual laboratory test data provided by Copper Development Association, Inc. B Based upon 150°F (65.6°C) with an allowable stress of 9500 psi (668 kPa). C Based upon 150°F (65.6°C) with an allowable stress of 5100 psi (359 kPa). Revision 5/12/02 AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 4 U.S. customary units in this document are the standard; the metric units are provided for reference only. The values stated in each system are not exact equivalents. DIMENSIONAL DATA – COPPER WATER TUBE – TYPE “L” TYPE “L” Hard Drawn: 20-ft. (6.1m) Straight Lengths Soft Annealed: 20-ft. (6.1m) Straight Lengths, or 40-ft. (12.2m) and 60-ft. (18.3m) Length Coils (to and including size 1 1/2) Usage: For general purpose plumbing and heating conditions. Tolerances Hard Drawn Soft Annealed (Hard Drawn Only) Outside Tubing OD Nominal Wall Weight Bursting Safe Working Bursting Safe Working Nominal Diameter Thickness Per Foot PressureA PressureB PressureA PressureC Water Tube Min. Max. Size (In Inches) Inch (mm) Inch (mm) Inch (mm) Inch (mm) Lb (kg) psi (bars) psi (bars) psi (bars) psi (bars) 1/4 0.375 (9.53) 0.373 (9.47) 0.376 (9.55) 0.030 (0.76) 0.126 (0.06) N/A N/A 1367 (94) N/A N/A 775 (53) 3/8 0.500 (12.70) 0.497 (12.62) 0.501 (12.73) 0.035 (0.89) 0.198 (0.09) N/A N/A 1168 (81) N/A N/A 662 (46) 1/2 0.625 (15.88) 0.622 (15.80) 0.626 (15.90) 0.040 (1.02) 0.285 (0.13) 7765 (535) 1082 (75) 3885 (268) 613 (42) 5/8 0.750 (19.05) 0.747 (18.97) 0.751 (19.08) 0.042 (1.07) 0.362 (0.16) N/A N/A 947 (65) N/A N/A 537 (37) 3/4 0.875 (22.23) 0.872 (22.15) 0.876 (22.25) 0.045 (1.14) 0.455 (0.21) 5900 (407) 873 (60) 2935 (202) 495 (34) 1 1.125 (28.58) 1.122 (28.50) 1.127 (28.63) 0.050 (1.27) 0.655 (0.30) 5115 (353) 741 (51) 2650 (183) 420 (29) 1 1/4 1.375 (34.93) 1.372 (34.85) 1.377 (34.98) 0.055 (1.40) 0.884 (0.40) 4550 (314) 658 (45) 2400 (165) 373 (26) 1 1/2 1.625 (41.28) 1.621 (41.17) 1.627 (41.33) 0.060 (1.52) 1.140 (0.52) 4100 (283) 613 (42) 2200 (152) 347 (24) 2 2.125 (53.98) 2.121 (53.87) 2.127 (54.03) 0.070 (1.78) 1.750 (0.79) 3365 (232) 545 (38) 1910 (132) 309 (21) 2 1/2 2.625 (66.68) 2.621 (66.57) 2.627 (66.73) 0.080 (2.03) 2.480 (1.12) 3215 (222) 504 (35) N/A N/A 285 (20) 3 3.125 (79.38) 3.121 (79.27) 3.127 (79.43) 0.090 (2.29) 3.330 (1.51) 2865 (198) 476 (33) N/A N/A 270 (19) 3 1/2 3.625 (92.08) 3.621 (91.97) 3.627 (92.13) 0.100 (2.54) 4.290 (1.95) N/A N/A 455 (31) N/A N/A 258 (18) 4 4.125 (104.78) 4.121 (104.67) 4.127 (104.83) 0.110 (2.79) 5.380 (2.44) 2865 (198) 440 (30) N/A N/A 249 (17) 5 5.125 (130.18) 5.121 (130.07) 5.127 (130.23) 0.125 (3.18) 7.610 (3.45) 2985 (206) 404 (28) N/A N/A 229 (16) 6 6.125 (155.58) 6.121 (155.47) 6.127 (155.63) 0.140 (3.56) 10.200 (4.63) 2690 (185) 376 (26) N/A N/A 213 (15) 8 8.125 (206.38) 8.119 (206.22) 8.127 (206.43) 0.200 (5.08) 19.290 (8.75) 2650 (183) 406 (28) N/A N/A 230 (16) 10 10.125 (257.18) 10.119 (257.02) 10.127 (257.23) 0.250 (6.35) 30.100 (13.65) N/A N/A 407 (28) N/A N/A 231 (16) 12 12.125 (307.98) 12.119 (307.82) 12.127 (308.03) 0.280 (7.11) 40.400 (18.33) N/A N/A 380 (26) N/A N/A 215 (15) Note: Information and data contained in these charts, as taken from ASTM Specifications B 88. Rated internal pressure for copper water tube based on the strength of the tube alone and applicable to systems using suitable mechanical joints. A Based on actual laboratory test data provided by Copper Development Association, Inc. B Based upon 150°F (65.6°C) with an allowable stress of 9500 psi (668 kPa). C Based upon 150°F (65.6°C) with an allowable stress of 5100 psi (359 kPa). Revision 5/12/02 AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 49 U.S. customary units in this document are the standard; the metric units are provided for reference only. The values stated in each system are not exact equivalents. Copper Water Tube continued DIMENSIONAL DATA – COPPER WATER TUBE – TYPE “M” TYPE “M” Hard Drawn Only: 20-ft. (6.1m) Straight Lengths Usage: For general purpose plumbing, heating and drainage installations. Tolerances Hard Drawn (Hard Drawn Only) Outside Tubing OD Nominal Wall Weight Bursting Safe Working Nominal Diameter Thickness Per Foot PressureA PressureB Water Tube Min. Max. Size (In Inches) Inch (mm) Inch (mm) Inch (mm) Inch (mm) Lb (kg) psi (bars) psi (bars) 1/4 0.375 (9.53) 0.373 (9.47) 0.376 (9.55) N/A N/A N/A N/A N/A N/A N/A N/A 3/8 0.500 (12.70) 0.497 (12.62) 0.501 (12.73) 0.025 (0.64) 0.145 (0.07) N/A N/A 855 (59) 1/2 0.625 (15.88) 0.622 (15.80) 0.626 (15.90) 0.028 (0.71) 0.204 (0.09) 6135 (423) 741 (51) 5/8 0.750 (19.05) 0.747 (18.97) 0.751 (19.08) N/A N/A N/A N/A N/A N/A N/A N/A 3/4 0.875 (22.23) 0.872 (22.15) 0.876 (22.25) 0.032 (0.81) 0.328 (0.15) 4717 (325) 611 (42) 1 1.125 (28.58) 1.122 (28.50) 1.127 (28.63) 0.035 (0.89) 0.465 (0.21) 3865 (266) 506 (35) 1 1/4 1.375 (34.93) 1.372 (34.85) 1.377 (34.98) 0.042 (1.07) 0.682 (0.31) 3875 (267) 507 (35) 1 1/2 1.625 (41.28) 1.621 (41.17) 1.627 (41.33) 0.049 (1.24) 0.940 (0.43) 3550 (245) 497 (34) 2 2.125 (53.98) 2.121 (53.87) 2.127 (54.03) 0.058 (1.47) 1.460 (0.66) 2935 (202) 448 (31) 2 1/2 2.625 (66.68) 2.621 (66.57) 2.627 (66.73) 0.065 (1.65) 2.030 (0.92) 2800 (193) 411 (28) 3 3.125 (79.38) 3.121 (79.27) 3.127 (79.43) 0.072 (1.83) 2.680 (1.22) 2665 (184) 380 (26) 3 1/2 3.625 (92.08) 3.621 (91.97) 3.627 (92.13) 0.083 (2.11) 3.580 (1.62) N/A N/A 378 (26) 4 4.125 (104.78) 4.121 (104.67) 4.127 (104.83) 0.095 (2.41) 4.660 (2.11) 2215 (153) 377 (26) 5 5.125 (130.18) 5.121 (130.07) 5.127 (130.23) 0.109 (2.77) 6.660 (3.02) 2490 (172) 349 (24) 6 6.125 (155.58) 6.121 (155.47) 6.127 (155.63) 0.122 (3.10) 8.920 (4.05) 2000 (138) 328 (23) 8 8.125 (206.38) 8.119 (206.22) 8.127 (206.43) 0.170 (4.32) 16.500 (7.48) 2285 (158) 344 (24) 10 10.125 (257.18) 10.119 (257.02) 10.127 (257.23) 0.212 (5.38) 25.600 (11.61) N/A N/A 344 (24) 12 12.125 (307.98) 12.119 (307.82) 12.127 (308.03) 0.254 (6.45) 36.700 (16.65) N/A N/A 345 (24) Note: Information and data contained in these charts, as taken from ASTM Specifications B 88. Rated internal pressure for copper water tube based on the strength of the tube alone and applicable to systems using suitable mechanical joints. A Based on actual laboratory test data provided by Copper Development Association, Inc. B Based upon 150°F (65.6°C) with an allowable stress of 9500 psi (668 kPa). Revision 5/12/02 AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 9 Consult price sheet for Made to Order items and for minimum order quantities. CAPS 617 Tube Cap C – Wrot APPROX. DIM. N NOM. SIZE NET WT./LBS. INCHES 1/8 0.01 1/32 1/4 0.01 3/32 3/8 0.01 3/32 1/2 0.02 3/32 5/8 0.03 1/8 3/4 0.04 1/8 1 0.07 5/32 1 1/4 0.10 3/32 1 1/2 0.16 1/8 2 0.27 5/32 2 1/2 0.50 7/32 3 0.78 7/32 4 1.66 1/4 717 Tube Cap C – Cast APPROX. DIM. N NOM. SIZE NET WT./LBS. INCHES 5 5.48 7/16 6 9.07 17/32 717-D Drain Cap – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 1/2 0.06 21/32 COUPLINGS 600 Reducing Coupling C x C – Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 1/8 x 3/16 O.D. 0.01 5/32 5/16 O.D. x 1/8 0.01 3/16 1/4 x 5/16 O.D. 0.01 3/16 1/4 x 1/8 0.01 3/16 3/8 x 1/4 0.02 3/16 3/8 x 5/16 O.D. 0.01 1/4 3/8 x 1/8 0.01 1/4 1/2 x 3/8 0.03 3/16 1/2 x 1/4 0.02 1/4 1/2 x 1/8 0.03 11/32 5/8 x 1/2 0.05 3/16 5/8 x 3/8 0.04 11/32 5/8 x 1/4 0.03 13/32 3/4 x 5/8 0.07 3/16 3/4 x 1/2 0.06 9/32 3/4 x 3/8 0.06 3/8 3/4 x 1/4 0.05 11/32 1 x 3/4 0.11 11/32 1 x 5/8 0.09 3/8 1 x 1/2 0.10 11/32 1 x 3/8 0.10 13/32 1 1/4 x 1 0.16 5/16 1 1/4 x 3/4 0.18 17/32 1 1/4 x 5/8 0.18 5/8 1 1/4 x 1/2 0.14 7/16 1 1/2 x 1 1/4 0.23 5/16 1 1/2 x 1 0.22 9/16 1 1/2 x 3/4 0.20 3/8 1 1/2 x 1/2 0.19 1/2 2 x 1 1/2 0.41 9/16 2 x 1 1/4 0.35 11/16 2 x 1 0.37 7/16 2 x 3/4 0.34 17/32 2 x 1/2 0.35 23/32 2 1/2 x 2 0.59 9/16 2 1/2 x 1 1/2 0.65 11/16 2 1/2 x 1 1/4 0.65 13/16 2 1/2 x 1 0.73 29/32 Continues… APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 3 x 2 1/2 0.98 1/2 3 x 2 1.06 15/16 3 x 1 1/2 0.92 11/32 3 1/2 x 3 1.52 1/2 4 x 3 1/2 2.12 19/32 4 x 3 1.92 27/32 4 x 2 1/2 1.77 1 4 x 2 1.92 11/4 5 x 4 3.50 331/32 5 x 3 3.18 115/32 5 x 2 1/2 3.50 13/16 5 x 2 3.09 21/32 6 x 5 5.70 11/8 6 x 4 5.24 11/2 6 x 3 5.04 2 6 x 2 1/2 5.13 21/4 6 x 2 4.89 21/2 8 x 6 13.06 119/32 8 x 4 12.22 219/32 8 x 3 11.79 33/32 8 x 2 1/2 12.64 33/8 600-RS Coupling with Rolled Tube Stop C x C – Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 1/8 O.D. 0.01 1/16 3/16 O.D. 0.01 3/32 1/8 0.01 1/16 5/16 O.D. 0.01 3/32 1/4 0.01 1/16 3/8 0.01 3/32 1/2 0.03 3/32 5/8 0.04 3/32 3/4 0.06 3/32 7/8 0.09 3/32 1 0.11 3/32 1 1/4 0.16 1/8 1 1/2 0.23 1/8 2 0.41 1/8 2 1/2 0.65 1/8 3 0.93 1/8 3 1/2 1.45 5/32 4 1.93 7/32 Revision 2/6/07 AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 10 601 Coupling without Stop C x C – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES 1/4 0.01 11/16 3/8 0.01 27/32 1/2 0.03 1 5/8 0.04 111/32 3/4 0.06 119/32 1 0.11 129/32 1 1/4 0.16 21/16 1 1/2 0.23 25/16 2 0.41 213/16 2 1/2 0.64 215/16 3 0.86 35/16 3 1/2 1.40 313/16 4 1.84 45/16 5 3.50 55/16 6 5.60 63/16 8 13.68 83/32 701 Reducing Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 3 x 1 1/4 1.35 23/32 3 x 1 1.64 27/32 COUPLINGS continued Consult price sheet for Made to Order items and for minimum order quantities. 600-DS Coupling with Dimpled Tube Stop C x C – Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 3/16 O.D. 0.01 3/32 1/8 0.01 1/16 5/16 O.D. 0.01 3/32 1/4 0.01 1/16 3/8 0.01 3/32 1/2 0.03 3/32 5/8 0.04 3/32 3/4 0.06 3/32 7/8 0.09 3/32 1 0.11 3/32 1 1/4 0.16 1/8 1 1/2 0.23 1/8 2 0.41 1/8 2 1/2 0.65 1/8 3 0.93 1/8 3 1/2 1.45 5/32 4 1.93 7/32 5 3.53 7/32 6 5.63 7/32 8 14.12 15/32 701-D Drain Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 1/2 0.08 1/4 3/4 0.14 1/4 1 0.22 1/4 702 Eccentric Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 3/4 x 1/2 0.10 17/32 1 x 3/4 0.18 1/4 1 1/4 x 1 0.25 1/4 1 1/4 x 3/4 0.24 9/32 724-5-A Hy-Set Hanger Coupling C – Cast APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES 1/2 0.05 15/8 23/32 3/4 0.09 15/8 27/32 1 0.13 15/8 1 Revision 2/7/07 AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 11 736 Cross-Over Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 1/2 0.27 17/16 3/4 0.60 129/32 COUPLINGS continued 735 Cross C x C x C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES 3/8 0.09 3/8 1/2 0.15 7/16 3/4 0.30 9/16 1 0.54 23/32 1 1/4 0.78 7/8 1 1/2 1.05 1 2 2.00 11/4 2 1/2 2.96 11/2 CROSSES ELBOWS 606 45° Elbow C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES 1/8 0.01 1/4 1/4 1/4 0.02 9/32 9/32 3/8 0.03 3/16 3/16 1/2 0.04 9/32 9/32 5/8 0.09 15/32 15/32 3/4 0.10 11/32 11/32 7/8 0.20 11/16 11/16 1 0.16 3/8 3/8 1 1/4 0.25 17/32 17/32 1 1/2 0.35 19/32 19/32 2 0.65 25/32 25/32 2 1/2 1.07 29/32 29/32 3 1.58 11/8 11/8 4 3.35 17/16 17/16 5 11.05 19/16 19/16 6 16.95 2 2 8 23.00 29/32 29/32 606-2 45° Fitting Elbow Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES 1/4 0.02 9/16 1/4 1/2 0.04 3/4 7/32 5/8 0.08 11/8 13/32 3/4 0.10 11/16 5/16 1 0.16 17/32 15/32 1 1/4 0.25 119/32 17/32 1 1/2 0.35 125/32 19/32 2 0.65 23/16 25/32 2 1/2 1.07 23/16 29/32 3 1.55 219/32 15/32 Consult price sheet for Made to Order items and for minimum order quantities. Revision 2/7/07 AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 12 ELBOWS continued Consult price sheet for Made to Order items and for minimum order quantities. 706-2 45° Fitting Elbow Ftg x C – Cast APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES 4 4.31 311/32 15/16 607 90° Elbow – Close Rough C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES 1/8 0.01 13/32 13/32 1/4 0.02 9/32 9/32 3/8 0.03 1/2 1/2 1/2 0.04 3/8 3/8 1/2 x 3/8 0.04 9/16 21/32 3/4 0.10 17/32 17/32 3/4 x 5/8 0.12 29/32 7/8 3/4 x 1/2 0.10 17/32 3/4 1 0.21 23/32 23/32 1 x 3/4 0.16 23/32 5/8 1 1/4 0.31 11/32 11/32 1 1/4 x 1 0.31 15/8 115/32 1 1/2 0.46 17/32 17/32 1 1/2 x 1 1/4 0.35 15/32 13/32 2 0.84 11/2 11/2 2 x 1 1/2 0.58 17/16 11/4 2 1/2 1.41 127/32 127/32 3 2.07 23/32 23/32 3 1/2 2.94 23/8 23/8 4 4.23 225/32 225/32 5 7.74 27/8 27/8 6 10.95 37/16 37/16 8 29.50 423/32 423/32 707 90° Elbow – Close Rough C x C – Cast APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES 1 1/4 x 1 0.42 15/8 115/32 1 1/4 x 3/4 0.34 9/16 13/16 1 1/4 x 1/2 0.28 15/32 27/32 1 1/2 x 1 0.54 11/16 1 1 1/2 x 3/4 0.42 19/32 31/32 1 1/2 x 1/2 0.40 5/8 29/32 2 x 1 1/4 0.86 7/8 11/4 2 x 1 0.78 3/4 11/4 2 x 3/4 0.69 5/8 11/4 2 1/2 x 2 2.16 13/16 19/32 3 x 2 1/2 2.26 111/16 11/2 3 x 2 2.68 13/8 19/16 4 x 3 5.18 129/32 215/32 607-I 90° Elbow – Intermediate Radius C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES 1/2 0.06 19/32 19/32 5/8 0.09 7/8 7/8 3/4 0.14 13/16 3/16 1 0.24 11/16 11/16 607-LT 90° Elbow – Long Radius C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES 3/16 O.D. 0.01 13/32 13/32 1/8 0.01 13/32 13/32 5/16 O.D. 0.02 9/16 9/16 1/4 0.02 17/32 17/32 1/4 x 1/8 0.01 19/32 1/2 3/8 0.04 23/32 23/32 1/2 0.08 7/8 7/8 1/2 x 3/8 0.06 13/16 13/16 1/2 x 1/4 0.03 25/32 21/32 5/8 0.10 13/32 13/32 5/8 x 1/2 0.09 11/16 11/16 3/4 0.16 11/8 11/8 3/4 x 5/8 0.13 11/4 13/32 3/4 x 1/2 0.10 11/8 11/16 7/8 0.28 119/32 119/32 1 0.28 17/16 17/16 1 x 3/4 0.20 11/4 11/8 1 x 5/8 0.15 113/32 13/32 1 1/4 0.42 17/8 17/8 1 1/4 x 1 0.33 125/32 11/2 1 1/2 0.66 21/4 21/4 2 1.23 215/16 215/16 2 1/2 1.96 311/16 311/16 3 2.93 41/32 41/32 4 5.95 51/4 51/4 Revision 2/7/07 AHEAD OF THE FLOW® www.nibco.com NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 13 Consult price sheet for Made to Order items and for minimum order quantities. 607-2 90° Fitting Elbow – Close Rough Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES 1/4 0.02 3/4 3/8 3/8 0.03 15/16 1/2 1/2 0.04 31/32 3/8 5/8 0.07 17/32 17/32 3/4 0.10 111/32 17/32 1 0.20 13/4 27/32 1 1/4 0.33 21/8 11/32 1 1/2 0.46 213/32 17/32 2 0.84 227/32 11/2 2 1/2 1.39 315/32 129/32 3 2.10 313/16 23/32 4 4.00 43/4 225/32 607-2-I 90° Fitting Elbow – Intermediate Radius Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES 1/2 0.06 15/32 19/32 5/8 0.09 19/16 7/8 3/4 0.14 15/8 13/16 1 0.24 21/32 11/16 607-2-LT 90° Fitting Elbow – Long Radius Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES 1/8 0.01 13/32 1/2 1/4 0.02 11/8 3/4 3/8 0.05 11/8 7/8 1/2 0.08 19/16 13/32 1/2 x 3/8 0.06 15/16 13/16 1/2 x 1/4 0.03 11/4 5/8 5/8 0.10 125/32 13/32 3/4 0.16 115/16 11/8 1 0.31 21/2 121/32 1 1/4 0.43 229/32 17/8 1 1/2 0.66 213/32 21/4 1 1/2 x 1 1/4 0.50 33/8 23/32 2 1.27 411/32 231/32 2 1/2 2.16 57/32 311/16 3 3.10 53/4 41/32 607-2-2 90° Fitting Elbow – Close Rough Ftg x Ftg – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES 1/2 0.04 11/16 3/4 0.12 115/32 1 0.20 123/32 1 1/4 0.33 21/8 1 1/2 0.46 213/32 2 0.82 227/32 3 2.12 37/8 ELBOWS continued 607-2-2-LT 90° Fitting Elbow – Long Radius Ftg x Ftg – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES 1/4 0.02 27/32 3/8 0.04 11/8 1/2 0.08 119/32 5/8 0.10 111/16 3/4 0.16 115/16 1 0.31 21/2 1 1/4 0.43 229/32 1 1/2 0.65 37/16 2 1.25 411/32 707-2-4 90° Fitting Elbow Ftg x M – Cast APPROX. DIM. B DIM. E NOM. SIZE NET WT./LBS. INCHES INCHES 1/2 0.12 7/8 25/32 Revision 2/8/07 Bull Moose Tube’s® Eddy Flow® is a specially engineered replacement for Schedule 10, offering better flow characteristics while providing design flexibility. This product is FM approved, as well as UL Listed (for U.S. and Canada) for roll grooving and welding. As an added benefit, it is more economical to use than Schedule 10 due to reduced delivery costs and ease of handling. Furthermore, Eddy Flow’s® larger ID provides an opportunity for downsizing and further cost savings. EDDY FLOW® THE COST EFFECTIVE REPLACEMENT FOR SCHEDULE 10 1819 Clarkson Road Chesterfield, MO 63017 Gerald, MO Kent, WA Casa Grande, AZ Dallas, TX Masury, OH For Additional Information Contact (800) 325-4467 Or From Canada Call: (800) 882-4666 www.bullmoosetube.com sales@bullmoosetube.com PIPE PREPARATION For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak-tight seat for the gasket, pipe surfaces should be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer’s instructions for the specific fitting used. 1-1/4 1.660 1.530 1.98 1.222 2.019 61 1-1/2 1.900 1.728 3.44 1.844 2.860 61 2 2.375 2.203 2.78 2.330 3.982 37 2-1/2 2.875 2.705 1.66 2.809 5.299 30 3 3.500 3.334 1.00 3.361 7.144 19 4 4.500 4.310 1.00 4.968 11.290 19 ADVANTAGES OF BULL MOOSE TUBE® EDDY FLOW® • Certified to ASTM A135 and A795 Type E, Grade A. • FM approved for roll grooving and welding for use in wet systems. • UL Listed (for U.S. and Canada) for joining by welding or by listed rubber gasketed fittings for use in wet, dry, preaction, and deluge type sprinkler systems. • Lightweight – saves shipping costs and offers easier handling. • Can be used with roll grooved couplings or welded outlets for pressures up to 300 psi. • Can be supplied roll grooved or plain end. • Can be hot dipped galvanized to meet FM’s & UL requirement for dry systems. • Supplied with EDDY GUARD II® MIC preventative coating. EDDY FLOW® (ID) WEIGHT PER FT. NPS SIZE (IN) O.D. (IN) EDDY FLOW® CRR* BUNDLE SIZE WATER FILLED WT. *Corrosion Resistance Ratio per latest UL Directory Listing 7 Bull Moose Tube’s® Eddythread 40® is a lightweight replacement for Schedule 40 that has a Corrosion Resistance Ratio of 1. EDDYTHREAD 40® A LIGHTWEIGHT SCHEDULE 40 REPLACEMENT PIPE ADVANTAGES OF BULL MOOSE TUBE® EDDYTHREAD 40® • Has a Corrosion Resistance Ratio of 1.0. • Has a pressure rating of 300 psi. • Is lighter weight than Schedule 40. • Is approved by Factory Mutual and listed by Underwriters Laboratories. • Is produced in accordance to ASTM A135 and A795 Type E, Grade A. • Can be used with standard Schedule 40 threaded fittings, couplings, and valves. • Is produced from steel with excellent properties of strength and threadability. • Can be used in wet, preaction, and deluge type sprinkler systems. • Can be hot dipped galvanized to meet FM’s requirement for dry systems. • Offers lower freight costs. • Supplied with EDDY GUARD II® MIC preventative coating. 1819 Clarkson Road Chesterfield, MO 63017 Gerald, MO Kent, WA Casa Grande, AZ Dallas, TX Masury, OH For Additional Information Contact (800) 325-4467 Or From Canada Call: (800) 882-4666 www.bullmoosetube.com sales@bullmoosetube.com I.D. (IN) WEIGHT LB./FT BUNDLE SIZE NOMINAL PIPE SIZE (IN) O.D. (IN) CRR* WATER FILLED WEIGHT 1 1.295 1.083 1.00 1.461 1.860 70 1-1/4 1.650 1.418 1.00 2.070 2.754 51 1-1/2 1.900 1.654 1.00 2.547 3.468 44 2 2.375 2.123 1.00 3.308 4.842 30 EDDYTHREAD 40® SPECIFICATIONS PIPE PREPARATION For proper operation, all pipe surfaces should be cleaned prior to installation. In order to provide a leak-tight seat for the gasket, pipe surfaces should be free from indentations and projections from the end of the pipe to the groove. All loose paint, scale, dirt, chips, grease, and rust must be removed prior to installation. Failure to take these important steps may result in improper coupling assembly, causing leakage. Also, check the manufacturer’s instructions for the specific fitting used. *Corrosion Resistance Ratio per latest UL Directory Listing 5 Grinnell Grooved Fire Protection Products Grooved Fittings Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 www.tyco-fire.com September 2004 TFP1810Page 1 of 6 The grooved fittings provide an economical and efficient method of changing direction, adding an outlet, reducing, or capping grooved piping systems. Grooved fittings are available in durable ductile iron or fabricated steel as indicated. Note: Figure 510S and 519S fittings are special short radius fittings with smaller center to end dimensions than standard grooved fittings. Depending on the size and coupling used, there may be interferences at the bolt pads that require repositioning of the coupling orientation. The use of flange adapters is not recommended with Figures 510S and 519S fittings. Contact Tyco Fire Products for details. WARNING The Fittings described herein must be installed and maintained in compliance with this document, as well as with the applicable standards of the National Fire Protection Association, in addition to the standards of any other authorities having jurisdiction. Failure to do so may impair the performance of this device. The owner is responsible for maintaining their fire protection system and devices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. Approvals: UL, FM, ULC, VdS, and LPCB; Note: See Fire Protection Submittal Sheet for exact Listing / Approval information. General Description When placing an order, indicate the full product name. Please specify the quantity, figure number, wall thickness, and size. Grinnell Grooved Piping Products, valves, accessories and other products are available throughout the U.S., Canada, and internationally, through a network of distribution centers. You may write directly or call 215-362-0700 for the distributor nearest you. Ordering Procedure Care and Maintenance The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in accordance with the applicable standards of the National Fire Protection Association (e.g., NFPA 25), in addition to the standards of any authority having jurisdiction. The installing contractor or product manufacturer should be contacted relative to any questions. Any impairment must be immediately corrected. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service. Products manufactured by Tyco Fire Products are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by Tyco Fire Products. No warranty is given for products or components manufactured by companies not affiliated by ownership with Tyco Fire Products or for products and components which have been subject to misuse, improper installation, corrosion, or which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protection Association (NFPA), and/or the standards of any other Authorities Having Jurisdiction. Materials found by Tyco Fire Products to be defective shall be either repaired or replaced, at Tyco Fire Products’ sole option. Tyco Fire Products neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. Tyco Fire Products shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer’s representatives. IN NO EVENT SHALL TYCO FIRE PRODUCTS BE LIABLE, IN CONTRACT, TORT, STRICT LIABILITY OR UNDER ANY OTHER LEGAL THEORY, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR CHARGES, REGARDLESS OF WHETHER TYCO FIRE PRODUCTS WAS INFORMED ABOUT THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENT SHALL TYCO FIRE PRODUCTS’ LIABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE. THE FOREGOING WARRANTY IS MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Limited Warranty See Fire Protection Submittal Sheet for Pressure Rating and Listing/Approval Information LPCB Vd S Material: Cast: Figures: 201, 210, 219, 250, 260, 501, 510, 519, 510DE, 501S, 510S and 519S - Ductile iron conforming to ASTM A-536, Grade 65-45-12 Fabricated Steel: Figures 391, 392, 393, 312, 313, 321, 327, 341 and 350 - Carbon Steel, (Sizes 11/4" - 6" are Schedule 40); (Sizes 8" - 12" are Schedule 30), conforming to ASTM A-53 Grade B Protective Coatings: • Non-lead orange paint • Fire brigade red (optional) non-lead paint • Hot dipped galvanized conforming to ASTM A-153 Technical Data Page 2 of 6 TFP1810 ‡- Available with tapped plugs, contact Tyco Fire & Building Products. Figures 201, 210, 219, and 260 Figure 201 Figure 210 Figure 219 Figure 260‡45° Elbow 90° Elbow Tee End Cap C to E Appx. Wt. C to E Appx. Wt. C to E Appx. Wt. E to E Appx. Wt.Inches Lbs. Inches Lbs. Inches Lbs. Inches Lbs. mm Kg. mm Kg. mm Kg. mm Kg. 1.75 0.9 2.75 1.0 2.75 1.4 0.88 0.4 44.5 0.4 69.9 0.5 69.9 0.6 22.4 0.2 1.75 1.1 2.75 1.2 2.75 1.8 0.88 0.6 44.5 0.5 69.9 0.5 69.9 0.8 22.4 0.3 2.00 1.8 3.25 2.0 3.25 2.7 0.88 0.9 50.8 0.8 82.6 0.9 82.6 1.2 22.4 0.42.25 2.2 3.75 3.0 3.75 5.8 0.88 0.9 57.2 1.0 95.3 1.4 95.3 2.6 22.4 0.4 2.25 2.2 3.75 3.0 3.75 5.8 0.94 1.1 57.2 1.0 95.3 1.4 95.3 2.6 23.9 0.5 2.50 3.5 4.25 4.5 4.25 7.0 0.88 1.1 63.5 1.6 108.0 2.0 108.0 3.2 22.4 0.52.88 5.5 4.75 8.5 4.75 11.5 73.0 2.5 120.7 3.9 120.7 5.2 3.00 5.2 5.00 8.5 5.00 11.8 1.00 2.6 76.2 2.4 127.0 3.9 127.0 5.4 25.4 1.2 3.25 7.7 5.25 11.3 5.25 10.6 82.6 3.5 133.4 5.1 133.4 4.83.25 7.7 5.50 11.3 5.50 15.3 0.92 4.7 82.6 3.5 139.7 5.1 139.7 6.9 23.4 2.1 3.25 8.5 5.50 13.5 5.50 17.0 1.00 5.0 82.6 3.9 139.7 6.1 139.7 7.7 25.4 2.3 3.50 12.0 6.00 14.6 6.00 13.9 88.9 5.4 152.4 6.6 152.4 6.3 3.50 12.0 6.50 18.5 6.50 26.0 1.00 7.5 88.9 5.4 165.1 8.4 165.1 11.8 25.4 3.43.50 12.0 6.50 18.5 6.50 26.0 1.00 7.5 88.9 5.4 165.1 8.4 165.1 11.8 25.4 3.4 4.25 23.0 7.75 36.5 7.75 45.0 108.0 10.4 196.9 16.6 196.9 20.4 4.25 23.0 7.75 36.5 7.75 45.0 1.19 12.8 108.0 10.4 196.9 16.6 196.9 20.4 30.2 5.84.75 31.0 9.00 60.0 9.00 72.1 1.25 20.0 120.7 14.1 228.6 27.2 228.6 32.7 31.8 9.1 5.25 40.0 10.00 67.0 10.00 92.5 1.25 36.0 133.4 18.1 254.0 30.4 254.0 42.0 31.8 16.3 NominalSize 11/4" 11/2" 2" 21/2" 76.1mm 3" 108.0mm - - 4" 133.0mm - - 139.7mm 5" 159.0mm - - 165.1mm 6" 216.3mm - - 8" 10" 12" Friction Resistance*(Expressed as Equivalent Straight Pipe)Elbow TeeSize 90°45°Branch RunInches Feet Feet Feet Feet mm Meters Meters Meters Meters 11⁄4 1.9 1.0 4.8 1.9 42.4 0.6 0.3 1.5 0.6 11⁄2 2.3 1.2 5.8 2.3 48.3 0.7 0.4 1.8 0.723.2 1.6 8.0 3.2 60.3 1.0 0.5 2.5 1.0 21⁄2 3.9 2.0 9.8 3.9 73.0 1.2 0.6 3.0 1.2 4.1 2.1 10.3 4.1 1.2 0.6 3.1 1.234.9 2.4 12.2 4.9 88.9 1.5 0.7 3.7 1.5 6.5 3.3 16.3 6.5 2.0 1.0 5.0 2.0 4 6.5 3.3 16.3 6.5 114.3 2.0 1.0 5.0 2.0 8.0 4.0 20.0 8.0 2.4 1.2 6.1 2.48.0 4.1 20.0 8.0 2.4 1.3 6.1 2.4 5 8.2 4.1 20.5 8.2 141.3 2.5 1.3 6.3 2.5 9.5 4.8 23.8 9.5 2.9 1.4 7.2 2.99.5 4.8 23.8 9.5 2.9 1.4 7.2 2.9 6 9.9 5.0 24.8 9.9 168.3 3.0 1.5 7.6 3.0 13.1 6.6 32.8 13.1 4.0 2.0 10.0 4.0813.1 6.6 32.8 13.1 219.1 4.0 2.0 10.0 4.0 10 16.5 8.3 41.3 16.5 273.0 5.0 2.5 12.6 5.0 12 19.9 9.9 49.7 19.9 323.4 6.1 3.0 15.1 6.1 76.1mm 108.0mm 133.0mm 139.7mm 159.0mm 165.1mm 216.3mm Figure 260 E to E Figure 201 C to E C to E Figure 210 C to E C to E Figure 219 C to E C to E For reducing tees and branches, use the value that is corrosponding to the branch size. Example: for 8" x 8" x 2" tee, the branchvalue 2" is 8.0 feet. *Friction resistance for all elbows and tees except Figures 510S and 519S. Page 3 of 6 TFP1810 Figures 501S, 510S and 519S Figure 501S Figure 510S Figure 519S45° Elbow 90° Elbow TeeC to E Appx Wt. C to E Appx. Wt. C to E Appx. Wt.Inches Lbs. Inches Lbs. Inches Lbs. mm Kg. mm Kg. mm Kg.2.00 1.8 2.75 1.5 2.75 2.1 50.8 0.8 69.9 0.7 69.9 1.0 2.25 2.2 3.00 2.2 3.00 3.0 57.2 1.0 76.2 1.0 76.2 1.4 2.25 2.2 3.00 2.3 3.00 3.1 57.2 1.0 76.2 1.0 76.2 1.4 2.50 3.5 3.38 3.0 3.38 4.1 63.5 1.6 85.9 1.3 85.9 1.9 3.00 5.2 4.00 5.6 4.00 7.7 76.2 2.4 101.6 2.6 101.6 3.5 3.25 7.7 4.88 8.6 4.88 12.0 82.6 3.5 124.0 3.9 124.0 5.4 3.25 8.5 4.88 8.8 4.88 12.0 82.6 3.9 124.0 3.9 124.0 5.43.50 12.0 5.50 11.00 5.50 15.0 88.9 5.4 139.7 5.0 139.7 6.8 3.50 12.0 5.50 11.2 5.50 15.2 88.9 5.4 139.7 5.1 139.7 6.9 4.25 23.0 6.88 23.4 6.88 31.2 108.0 10.4 174.8 10.6 174.8 14.2 NominalSize 2" 21/2" 76.1mm 3" 4" 139.7mm 5" 165.1mm 6" 8" Figure 510S* C to E C to E Figure 519S* C to E C to E *Note: Figure 510S and 519S fittings are special short radius fittings with smaller center to end dimensions than standard grooved fittings. Depending on the size and coupling used, there may be interferences at the bolt pads which requires repositioning of the coupling orientation. The use of flange adapters is not recommended with Figures 510S and 519S fittings. Contact Tyco Fire Products for details. Figures 501, 510, 519 and 510DE Figure 501 C to E C to E Figure 510 C to E C to E Figure 501S C to E C to E Figure 510DE C to E C to E A B Figure 519 C to E C to E Figure 501 Figure 510 Figure 519 Figure 510DE45° Elbow 90° Elbow Tee 90° Drain Elbow C to E Appx. Wt. C to E Appx. Wt. C to E Appx. Wt. C to E A B Appx. Wt.Inches Lbs. Inches Lbs. Inches Lbs. Inches Inches Inches Lbs. mm Kg. mm Kg. mm Kg. mm mm mm Kg. 1.75 0.9 2.75 1.0 2.75 1.4 44.5 0.4 69.9 0.5 69.9 0.6 1.75 1.1 2.75 1.2 2.75 1.8 44.5 0.5 69.9 0.5 69.9 0.82.00 1.8 3.25 2.0 3.25 2.7 50.8 0.8 82.6 0.9 82.6 1.2 2.25 2.2 3.75 3.0 3.75 5.8 3.75 2.00 2.75 2.7 57.2 1.0 95.3 1.4 95.3 2.6 95.3 50.8 69.9 1.2 2.50 3.5 4.25 4.5 4.25 7.0 4.25 2.34 2.75 3.7 63.5 1.6 108.0 2.0 108.0 3.2 108.0 59.4 69.9 1.7 3.00 5.2 5.00 8.5 5.00 11.8 5.00 2.85 2.75 7.0 76.2 2.4 127.0 3.9 127.0 5.4 127.0 72.4 69.9 3.2 3.25 8.5 5.50 13.5 5.50 17.0 5.50 3.38 2.75 13.0 82.6 3.9 139.7 6.1 139.7 7.7 139.7 85.9 69.9 5.9 3.50 12.0 6.50 18.5 6.50 26.0 6.50 3.92 2.75 13.4 88.9 5.4 165.1 8.4 165.1 11.8 165.1 99.6 69.9 6.1 4.25 23.0 7.75 36.5 7.75 45.0 7.75 4.95 2.75 26.3 108.0 10.4 196.9 16.6 196.9 20.4 196.9 125.7 69.9 11.9 NominalSize 11/4"--- - 11/2"--- - 2"--- - 21/2" 3" 4" 5" 6" 8" Friction Resistance 501S, 510S & 519S(Expressed as Equivalent Straight Pipe) Elbow Tee Size 90°45°Branch RunInches Feet Feet Feet Feet mm Meters Meters Meters Meters 2 3.2 1.6 8.0 3.2 60.3 1.0 0.5 2.5 1.021⁄2 3.9 2.0 9.8 3.9 73.0 1.2 0.6 3.0 1.2 4.1 2.1 10.3 4.1 1.2 0.6 3.1 1.2 3 4.9 2.4 12.2 4.9 88.9 1.5 0.7 3.7 1.5 4 6.5 3.3 16.3 6.5 114.3 2.0 1.0 5.0 2.0 8.0 4.1 20.0 8.0 2.4 1.3 6.1 2.4 5 8.2 4.1 20.5 8.2 141.3 2.5 1.3 6.3 2.5 9.5 4.8 23.8 9.5 2.9 1.4 7.2 2.969.9 5.0 24.8 9.9 168.3 3.0 1.5 7.6 3.0 8 13.1 6.6 32.8 13.1 219.1 4.0 2.0 10.0 4.0 76.1mm 139.7mm 165.1mm Page 4 of 6 TFP1810 Figures 250 and 350 Figure 350 Fabricated Sizes 3” to 6” E to E E to E Figure 350 Fabricated Sizes 8” to 12” E to E Figure 250 Cast Figures 250 and 350 Concentric Reducer - Groove x Groove Nominal E to E Appx. Wt. Nominal E to E Appx. Wt. Nominal E to E Appx. Wt.Size Inches Lbs. Size Inches Lbs. Size Inches Lbs. Inches mm Kg. Inches mm Kg. Inches mm Kg. 2.50 1.0 3.50 4.2 4.00 5.8 63.5 0.5 88.9 1.9 101.6 2.6 2.50 1.3 3.50 4.4 5.00 12.2 63.5 0.6 88.9 2.0 127.0 5.5 2.50 1.2 3.50 4.6 5.00 12.1 63.5 0.5 88.9 2.1 127.0 5.5 2.50 1.5 3.50 4.6 5.00 12.0 63.5 0.7 88.9 2.1 127.0 5.5 2.50 1.6 3.50 4.5 5.00 11.9 63.5 0.8 88.9 2.0 127.0 5.4 2.50 1.3 3.50 4.4 5.00 11.3 63.5 0.6 88.9 2.0 127.0 5.1 2.50 1.3 3.50 4.5 5.00 10.8 63.5 0.6 88.9 2.0 127.0 4.9 2.50 1.3 4.00 5.5 6.00 21.9 63.5 0.6 101.6 2.5 152.4 10.0 3.00 1.5 4.00 6.0 6.00 21.6 76.2 0.7 101.6 2.7 152.4 9.8 3.00 2.0 4.00 5.6 6.00 21.1 76.2 0.9 101.6 2.5 152.4 9.6 3.00 2.2 4.00 6.0 6.00 19.5 76.2 1.0 101.6 2.7 152.4 8.9 3.00 2.3 4.00 6.0 7.00 28.0 76.2 1.0 101.6 2.7 177.8 12.7 3.00 2.3 4.00 6.0 7.00 30.0 76.2 1.0 101.6 2.7 177.8 13.6 3.00 2.3 4.00 6.0 7.00 28.0 76.2 1.0 101.6 2.7 177.8 12.7 3.00 3.2 4.00 5.9 7.00 33.0 76.2 1.5 101.6 2.7 177.8 15.0 3.00 2.6 4.00 6.3 76.2 1.2 101.6 2.9 *2 x 11⁄4 *139.7mm x 3 *6 x 5 *2 x 11⁄2 *139.7mm x 4 8 x 2 *21⁄2 x 2 5 x 1 1⁄2 8 x 21⁄2 *76.1mm x 11⁄2 5 x 2 8 x 3 *76.1mm x 2 5 x 21⁄2 8 x 4 3 x 11⁄4 5 x 3 8 x 5 3 x 11⁄2 *5 x 4 8 x 6 *3 x 2 *165.1mm x 3 10 x 4 *3 x 21⁄2 *165.1mm x 4 10 x 5 *3 x 76.1mm *165.1mm x 139.7mm 10 x 6 4 x 11⁄4 *6 x 2 10 x 8 4 x 11⁄2 6 x 21⁄2 12 x 4 *4 x 2 *6 x 76.1mm 12 x 6 *4 x 21⁄2 6 x 3 12 x 8 *4 x 76.1mm *6 x 4 12 x 10 4 x 3 *6 x 139.7mm B C A D ADA CAP® Patented Pipe Nominal Dimensions O.D. Takeout Center to EndSize A B C DInches Inches Inches Inches Inches mm mm mm mm 1.25 1.75 1.89 0.77 31.8 44.5 48.0 0.3 1.900 1.25 1.75 1.89 0.77 48.3 31.8 44.5 48.0 0.31.37 2.00 2.02 0.88 34.8 50.8 51.3 0.4 1.25 1.75 1.89 0.92 31.8 44.5 48.0 0.4 2.375 1.25 1.75 1.89 0.92 60.3 31.8 44.5 48.0 0.4 1.37 2.00 2.02 1.06 34.8 50.8 51.3 0.5 1.47 1.97 1.89 1.28 37.3 50.0 48.0 0.6 2.875 1.47 1.97 1.89 1.28 73.0 37.3 50.0 48.0 0.6 1.37 2.00 2.02 1.50 34.8 50.8 51.3 0.7 NetOutlet Wt.NPT* Lbs.Inches Kg. 1/2 11/2 3/4 1 1/2 2 3/4 1 1/2 21/2 3/4 1 *ISO-7 threaded outlets are available upon request. Note: Sizes marked with an asterisk (*) are only available in Figure 250 Cast. Sizes without an asterisk are only available in Figure 350 Fabricated. Page 5 of 6 TFP1810 Figures 391, 392, 393, 312 and 313 Figure 341 E to E Figure 327 C to E C to E Figure 393 E to E Figure 392 E to E Figure 391 E to E Figure 313C to E C to E Figure 341 150 lbs. Flange Adapter C to E Appx. Wt. E to E Appx. Wt.nches Lbs. Inches Lbs. mm kg. mm kg. 2.75 2.0 4.00 2.8 69.6 0.9 101.6 1.3 2.75 2.2 4.00 3.2 69.9 2.0 101.6 1.5 3.25 2.7 4.0 5.2 82.6 1.2 101.6 2.4 3.75 5.0 4.00 8.0 95.3 2.3 101.6 3.6 4.25 7.1 4.00 10.2 108.0 3.2 101.6 4.6 5.00 11.9 6.00 17.2 127.0 5.4 152.4 7.8 5.50 17.1 6.00 21.4 139.7 7.8 152.4 9.7 6.50 27.5 6.00 26.0 165.1 12.5 152.4 11.8 7.75 47.0 6.00 38.4 196.9 21.3 152.4 17.4 9.00 68.0 8.00 65.0 228.6 30.8 203.2 29.5 10.00 107.0 8.00 91.0 254.0 48.5 203.2 41.3 NominalSize 11/4" 11/2" 2" 21/2" 3" 4" 5" 6" 8" 10" 12" Figure 327Cross Figures 391,392 and 393 Adapter Nipples E to E Appx. Wt. C to E Appx. Wt. C to E Appx. Wt.Inches Lbs. Inches Lbs. Inches Lbs. mm Kg. mm Kg. mm Kg. 4.00 0.8 1.75 0.4 1.38 0.4 101.6 0.4 44.5 0.2 35.1 0.2 4.00 0.9 1.75 0.5 1.38 0.5 101.6 0.4 44.5 0.2 35.1 0.2 4.00 1.2 1.88 0.6 1.38 0.6 101.6 0.5 47.8 0.3 35.1 0.3 4.00 1.9 2.00 0.7 1.50 1.1 101.6 0.9 50.8 0.3 38.1 0.5 4.00 2.5 2.25 1.4 1.50 1.2 101.6 1.1 57.2 0.6 38.1 0.5 6.00 5.5 2.63 2.4 1.75 2.2 152.4 2.5 66.8 1.1 44.5 1.0 6.00 7.4 2.88 4.1 2.00 3.3 152.4 3.4 73.2 1.9 50.8 1.5 6.00 9.5 3.13 5.6 2.00 4.6 152.4 4.3 79.5 2.5 50.8 2.1 6.00 14.2 3.88 11.1 2.00 8.7 152.4 6.4 98.6 5.0 50.8 3.9 8.00 27.0 4.38 14.0 2.13 9.1 203.2 12.2 11.3 6.4 54.1 4.1 8.00 33.0 4.88 22.0 2.25 16.7 203.2 15.0 124.0 10.0 57.2 7.6 NominalSize 11/4" 11/2" 2" 21/2" 3" 4" 5" 6" 8" 10" 12" Figure 312 Figure 313221/2° Elbow 11 1/4° Elbow Figures 327 and 341 Figure 312 C to E C to E General Notes: It is the Designer’s responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always read and understand the installation instructions (IH-1000). Never remove any piping component or correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application.Certified Company TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19946 Printed U.S.A. Page 6 of 6 TFP1810 Figure 321 Figure 321 C to E C to E 11⁄2 x 11⁄2 x 11⁄4 6 x 6 x 4 2 x 2 x 11⁄2 6 x 6 x 5 21⁄2 x 21⁄2 x 11⁄4 8 x 8 x 2 21⁄2 x 21⁄2 x 11⁄2 8 x 8 x 3 21⁄2 x 21⁄2 x 2 8 x 8 x 4 3 x 3 x 11⁄2 8 x 8 x 5 3 x 3 x 2 8 x 8 x 6 3 x 3 x 21⁄2 10 x 10 x 2 4 x 4 x 11⁄4 10 x 10 x 3 4 x 4 x 11⁄2 10 x 10 x 4 4 x 4 x 2 10 x 10 x 5 4 x 4 x 21⁄2 10 x 10 x 6 4 x 4 x 3 10 x 10 x 8 5 x 5 x 2 12 x 12 x 3 5 x 5 x 21⁄2 12 x 12 x 4 5 x 5 x 3 12 x 12 x 5 5 x 5 x 4 12 x 12 x 6 6 x 6 x 2 12 x 12 x 8 6 x 6 x 21⁄2 12 x 12 x 10 6 x 6 x 3 Figure 321 Reducing Tee Nominal C to E Appx. Wt. Nominal C to E Appx. Wt.Size Inches Lbs. Size Inches Lbs. Inches mm Kg.Inches mm Kg. 3.25 2.0 6.50 26.6 82.6 0.9 165.1 12.1 3.25 2.7 6.50 27.0 82.6 1.2 165.1 12.2 3.75 4.2 7.75 36.2 95.3 1.9 196.9 16.4 3.75 4.2 7.75 36.5 95.3 1.9 196.9 16.6 3.75 4.3 7.75 36.6 95.3 2.0 196.9 16.6 4.25 5.3 7.75 36.8 108.0 2.4 196.9 16.7 4.25 5.5 7.75 37.0 108.0 2.5 196.9 16.8 4.25 5.8 9.00 57.1 108.0 2.6 228.6 25.9 5.00 9.8 9.00 57.4 127.0 4.4 228.6 26.0 5.00 9.9 9.00 57.6 127.0 4.5 228.6 26.1 5.00 10.1 9.00 57.8 127.0 4.6 228.6 26.2 5.00 10.3 9.00 58.0 127.0 4.7 228.6 26.3 5.00 10.5 9.00 58.4 127.0 4.8 228.6 26.5 5.50 14.5 10.00 80.2 139.7 6.6 254.0 36.4 5.50 14.8 10.00 80.5 139.7 6.7 254.0 36.5 5.50 15.2 10.00 80.7 139.7 6.9 254.0 36.6 5.50 15.8 10.00 80.9 139.7 7.2 254.0 36.7 6.50 26.5 10.00 91.4 165.1 11.9 254.0 41.5 6.50 26.5 10.00 91.8 165.1 12.0 254.0 41.6 6.50 26.5 165.1 12.0 Grinnell Grooved Fire Protection Products Figure 772 Rigid Coupling - Patented Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 www.tyco-fire.com July 2004 TFP1850Page 1 of 2 The Figure 772 Rigid Coupling provides a rigid joint by firmly gripping along the circumference of the pipe grooves. Rigid couplings are preferred for dry pipe and freezer applications. Figure 772 Rigid Couplings are a proven dependable method of joining pipe and are an economical alternative to welding, threading or using flanges. It is capable of pressures up to 500 psig (3447 kPa) depending on pipe size and wall thickness when used in fire protection services. Rigid Couplings are recommended for dry pipe and freezer applications. WARNING The Figure 772 Rigid Coupling described herein must be installed and maintained in compliance with this document, as well as with the applicable standards of the National Fire Protection Association, in addition to the standards of any other authorities having jurisdiction.Failure to do so may impair the performance of this device. The owner is responsible for maintaining their fire protection system and devices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. Figure: 772 Sizes: 11⁄4" - 12" Approvals:UL, FM, ULC, VdS, and LPCB; See Fire Protection Submittal Sheet for exact Listing / Approval information. General Description When placing an order, indicate the full product name. Please specify the quantity, figure number, type of gasket, Grade “A” EPDMA, Prelubricated (Grade “A” EPDMA) or Grade “E” EPDM Tri-Seal, and size. Grinnell Grooved Piping Products, valves, accessories and other products are available throughout the U.S., Canada, and internationally, through a network of distribution centers. You may write directly or call 215-362-0700 for the distributor nearest you. Ordering Procedure Care and Maintenance The owner is responsible for the inspection, testing, and maintenance of their fire protection system and devices in accordance with the applicable standards of the National Fire Protection Association (e.g., NFPA 25), in addition to the standards of any authority having jurisdiction. The installing contractor or product manufacturer Products manufactured by Tyco Fire Products are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by Tyco Fire Products. No warranty is given for products or components manufactured by companies not affiliated by ownership with Tyco Fire Products or for products and components which have been subject to misuse, improper installation, corrosion, or which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protection Association (NFPA), and/or the standards of any other Authorities Having Jurisdiction. Materials found by Tyco Fire Products to be defective shall be either repaired or replaced, at Tyco Fire Products’ sole option. Tyco Fire Products neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. Tyco Fire Products shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer’s representatives. IN NO EVENT SHALL TYCO FIRE PRODUCTS BE LIABLE, IN CONTRACT, TORT, STRICT LIABILITY OR UNDER ANY OTHER LEGAL THEORY, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR CHARGES, REGARDLESS OF WHETHER TYCO FIRE PRODUCTS WAS INFORMED ABOUT THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENT SHALL TYCO FIRE PRODUCTS’ LIABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE. THE FOREGOING WARRANTY IS MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Limited Warranty See Fire Protection Submittal Sheet for Pressure Rating and Listing/Approval Information LPCB Vd S Housing:Ductile iron conforming to ASTM A-536, Grade 65-45-12 Protective Coatings: • Non-lead orange paint • Fire brigade red (optional) non-lead paint • Hot dipped galvanized conforming to ASTM A-153 Bolt/Nuts:Track Head Bolts - conforming to ASTM A-183, Zinc Plated, (Min. Tensile = 110,000 psi/758,422 kPa) Metric - conforming to ASTM F568M Gasket: (specify when ordering) • Grade “A” EPDMA violet color code ambient to +150°F (+66°C) for fire protection systems. Not recommended for hot water systems. • Tri-seal (Grade “E” EPDM), green color code for use in dry pipe or freezer systems. • Prelubricated (Grade “A” EPDMA) (See Data Sheet TFP1895 for aid in selecting proper gasket) Technical Data should be contacted relative to any questions. Any impairment must be immediately corrected. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service. General Notes: It is the Designer’s responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always read and understand the installation instructions (IH-1000). Never remove any piping component or correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application.Certified Company TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19946 Printed U.S.A. Page 2 of 2 TFP1850 Figure 772 Grooved Coupling * Maximum available gap between pipe ends. Minimum gap = 0. † Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials and/or wall thickness. Contact Tyco Fire Products for details. See Fire Protection Equipment Submittal Sheet for Listing and Approval pressure ratings. ** Gold color coded metric bolt sizes are available upon request. ‡ Max End Gap is for cut grooved standard weight pipe. Values for roll grooved pipe will be 1⁄2 that of cut grooved. CB A Pipe Max.*‡ Max.† Max.† Nominal Dimensions Net O.D. End Gap Pressure End Load A B C Wt. Size Inches Inches psi Lbs. Inches Inches Inches Lbs. mm mm kPa N mm mm mm Kg. 1.660 0.06 300 649 2.75 4.38 1.81 3⁄8" x 21⁄4" 1.0 42.4 1.5 2,068 2,887 69.9 111.3 46.0 M10 x 57 0.5 1.900 0.08 500 1,417 3.00 4.62 1.81 3⁄8" x 21⁄4" 1.0 48.3 2.0 3,447 6,303 76.2 117.3 46.0 M10 x 57 0.5 2.375 0.13 500 2,214 3.41 5.12 1.88 3⁄8" x 21⁄4" 1.5 60.3 3.3 3,447 9,848 86.6 130.0 47.8 M10 x 57 0.7 2.875 0.13 500 3,244 3.91 5.63 1.88 3⁄8" x 21⁄4" 2.5 73.0 3.3 3,447 14,430 99.3 143.0 47.8 M10 x 57 1.1 3.000 0.13 300 2,120 4.19 5.72 2.00 2.6 76.1 3.3 2,068 9,430 106.4 145.3 50.8 1.2 3.500 0.13 500 4,808 4.63 6.25 1.88 3⁄8" x 21⁄4" 2.6 88.9 3.3 3,447 21,387 117.6 158.8 47.8 M10 x 57 1.2 4.500 0.19 500 7,948 5.81 7.50 1.97 3⁄8" x 21⁄4" 3.5 114.3 4.8 3,447 35,353 147.6 190.5 50.0 M10 x 57 1.6 5.500 0.19 300 7,127 7.02 9.72 2.06 7.5 139.7 4.8 2,068 31,701 178.3 246.9 52.3 3.4 5.563 0.19 300 7,288 7.09 9.71 2.04 5⁄8" x 31⁄4" 7.5 141.3 4.8 2,068 32,417 180.1 246.6 51.8 M16 x 83 3.4 6.500 0.19 300 9,950 8.09 10.53 2.13 7.6 165.1 4.8 2,068 44,258 205.5 267.5 54.1 3.4 6.625 0.19 400 13,782 8.09 10.53 2.13 5⁄8" x 31⁄4" 7.6 168.3 4.8 2,758 61,302 205.5 267.5 54.1 M16 x 83 3.4 8.625 0.19 450 26,278 10.56 13.56 2.62 3⁄4" x 43⁄4" 18.0 219.1 4.8 3,103 116,885 268.2 344.4 66.5 M20 x 121 8.2 10.750 0.13 250 22,679 12.84 16.41 2.62 1" x 6 1⁄2" 24.6 273.0 3.3 1,724 100,876 326.1 416.8 66.5 M24 x 165 11.2 12.750 0.13 250 31,903 15.41 18.84 2.62 1" x 6 1⁄2" 42.0 323.9 3.3 1,724 141,905 391.4 478.5 66.5 M24 x 165 19.1 Bolt Size** Dia. x Lg. M10 x 57 M16 x 83 M16 x 83 11⁄4" 11⁄2" 2" 21⁄2" 76.1mm 3" 4" 139.7mm 5" 165.1mm 6" 8" 10" 12" Figure 772 Rigid Couplings have an Anti-Rotation Feature of “gripping teeth” along the coupling keys in sizes 11⁄4" - 4", which make the Figure 772 perfectly suited for “arm over” installations where the likelihood of rotation is greatest. This feature may eliminate the need of extra hangers to support the arm over due to increased rigidity and gripping force saving time and cost. General Description The Series TY-FRB, 2.8, 4.2, 5.6, and 8.0 K-factor, Upright and Pendent Sprinklers described in this data sheet are quick response - standard cover- age, decorative 3 mm glass bulb type spray sprinklers designed for use in light or ordinary hazard, commercial occupancies such as banks, hotels, shopping malls, etc. The recessed version of the Series TY-FRB Pendent Sprinkler, where ap- plicable, is intended for use in areas with a finished ceiling. It uses either a two-piece Style 10 (1/2 inch NPT) or Style 40 (3/4 inch NPT) Recessed Es- cutcheon with 1/2 inch (12,7 mm) of recessed adjustment or up to 3/4 inch (19,1 mm) of total adjustment from the flush pendent position, or a two-piece Style 20 (1/2inchNPT)orStyle30(3/4 inch NPT) Recessed Escutcheon with 1/4 inch (6,4 mm) of recessed adjust- ment or up to 1/2 inch (12,7 mm) of total adjustment from the flush pen- dent position. The adjustment pro- vided by the Recessed Escutcheon re- duces the accuracy to which the fixed pipe drops to the sprinklers must be cut. Corrosion resistant coatings, where applicable, are utilized to extend the life of copper alloy sprinklers beyond that which would otherwise be ob- tained when exposed to corrosive at- mospheres. Although corrosion resis- tant coatedsprinklers havepassed the standard corrosion tests of the appli- cable approval agencies, the testing is not representative of all possible cor- rosive atmospheres. Consequently, it is recommended that the end user be consulted with respect to the suitability of these coatings for any given corro- sive environment. The effects of ambi- ent temperature, concentration of chemicals, and gas/chemical velocity, should be considered, as a minimum, along with the corrosive nature of the chemical to which the sprinklers will be exposed. An intermediate level versions of the Series TY-FRB Pendent Sprinklers are detailed in Technical Data Sheet TFP356, and Sprinkler Guards are de- tailed in Technical Data Sheet TFP780 WARNINGS The Series TY-FRB Sprinklers de- scribed herein must be installed and maintained in compliance with this document, as well as with the applica- ble standards of the National Fire Pro- tection Association, in addition to the standards of any other authorities hav- ing jurisdiction.Failure to do so may impair the performance of these de- vices. The owner is responsible for maintain- ing their fire protection system and de- vices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. Model/Sprinkler Identification Numbers TY1131 - Upright 2.8K, 1/2"NPT TY1231 - Pendent 2.8K, 1/2"NPT TY2131 - Upright 4.2K, 1/2"NPT TY2231 - Pendent 4.2K, 1/2"NPT TY3131 - Upright 5.6K, 1/2"NPT TY3231 - Pendent 5.6K, 1/2"NPT TY4131 - Upright 8.0K, 3/4"NPT TY4231 - Pendent 8.0K, 3/4"NPT TY4831- Upright 8.0K, 1/2"NPT TY4931- Pendent 8.0K, 1/2"NPT Series TY-FRB — 2.8, 4.2, 5.6, and 8.0 K-factor Upright, Pendent, and Recessed Pendent Sprinklers Quick Response, Standard Coverage Page 1 of 10 TFP171MARCH, 2007 Technical Services:Tel: (800) 381-9312 / Fax: (800) 791-5500 IMPORTANT Always refer to Technical Data Sheet TFP700 for the “INSTALLER WARNING” that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and in- stallation can permanently damage a sprinkler system or its compo- nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. Page2of10 TFP171 2 4 5 6 7 3 (57,2 mm) 2-1/4" (39,7 mm) 1-9/16" 1 PENDENT CROSS SECTION PLATE SEATING ESCUTCHEON 7/16" (11,1 mm) NOMINAL MAKE-IN FLATS WRENCH SURFACE NPT 1/2" RECESSED PENDENT UPRIGHT 2-7/8" (73,0 mm) DIA. (11,1 mm) NOMINAL MAKE-IN 7/16" RECESSED STYLE 10 or 20 ESCUTCHEON (55,6 mm) 2-3/16" 1/2" NPT DEFLECTOR SSU SSP DEFLECTOR * * FIGURE 1 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY1131) AND PENDENT (TY1231) SPRINKLERS 2.8 K-FACTOR, 1/2 INCH NPT 1-Frame 2 - Button 3 - Sealing Assembly 4-Bulb 5 - Compression Screw 6-Deflector 7-Bushing *Temperature rating is indicated on deflector or adjacent to orifice seat on frame. FIGURE 2 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY2131) AND PENDENT (TY2231) SPRINKLERS 4.2 K-FACTOR, 1/2 INCH NPT 1-Frame 2-Button 3 - Sealing Assembly 4-Bulb 5 - Compression Screw 6 - Deflector *Temperature rating is indicated on deflector or adjacent to orifice seat on frame. 2 4 5 6 PENDENT CROSS SECTION (55,6 mm) 2-3/16" (38,1 mm) 1-1/2" PLATE SEATING ESCUTCHEON 7/16" (11,1 mm) NOMINAL MAKE-IN FLATS WRENCH SURFACE 1 3 NPT 1/2" RECESSED PENDENT UPRIGHT 2-7/8" (73,0 mm) DIA. (11,1 mm) NOMINAL MAKE-IN 7/16" RECESSED STYLE 10 or 20 ESCUTCHEON (55,6 mm) 2-3/16" 1/2" NPT DEFLECTOR SSU SSP DEFLECTOR * * * TFP171 Page 3 of 10 2 4 5 6 PENDENT CROSS SECTION (58,7 mm) 2-5/16" (39,7 mm) 1-9/16" PLATE SEATING ESCUTCHEON 1/2" (12,7 mm) NOMINAL MAKE-IN FLATS WRENCH SURFACE 1 3 NPT 3/4" RECESSED PENDENT UPRIGHT 2-7/8" (73,0 mm) DIA. (12,7 mm) NOMINAL MAKE-IN 1/2" RECESSED STYLE 30 or 40 ESCUTCHEON (57,2 mm) 2-1/4" 3/4" NPT DEFLECTOR SSU SSP DEFLECTOR * * * FIGURE 4 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY4131) AND PENDENT (TY4231) SPRINKLERS 8.0 K-FACTOR, 3/4 INCH NPT 1-Frame 2 - Button 3 - Sealing Assembly 4-Bulb 5 - Compression Screw 6-Deflector *Temperature rating is indicated on deflector or adjacent to orifice seat on frame. FIGURE 3 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY3131) AND PENDENT (TY3231) SPRINKLERS 5.6 K-FACTOR, 1/2 INCH NPT 1-Frame 2-Button 3 - Sealing Assembly 4-Bulb 5 - Compression Screw 6 - Deflector *Temperature rating is indicated on deflector or adjacent to orifice seat on frame. 2 4 5 6 PENDENT CROSS SECTION (55,6 mm) 2-3/16" (38,1 mm) 1-1/2" PLATE SEATING ESCUTCHEON 7/16" (11,1 mm) NOMINAL MAKE-IN FLATS WRENCH SURFACE 1 3 NPT 1/2" RECESSED PENDENT UPRIGHT 2-7/8" (73,0 mm) DIA. (11,1 mm) NOMINAL MAKE-IN 7/16" RECESSED STYLE 10 or 20 ESCUTCHEON (55,6 mm) 2-3/16" 1/2" NPT DEFLECTOR SSU SSP DEFLECTOR * * * Technical Data Approvals UL and C-UL Listed. FM, LPCB, and NYC Approved. (Refer to Table A and B for complete approval information including corro- sion resistant status.) Maximum Working Pressure RefertoTableC. Discharge Coefficient K=2.8GPM/psi1/2 (40,3 LPM/bar 1/2) K=4.2GPM/psi1/2 (60,5 LPM/bar 1/2) K=5.6GPM/psi1/2 (80,6 LPM/bar 1/2) K = 8.0 GPM/psi 1/2 (115,2 LPM/bar 1/2) Temperature Ratings Refer to Table A and B Finishes Sprinkler: Refer to Table A and B. Recessed Escutcheon: White Coated, Chrome Plated, or Brass Plated. Physical Characteristics Frame . . . . . . . . . . . . . Bronze Button......... Brass/Copper SealingAssembly .......... . . . . . Beryllium Nickel w/Teflon† Bulb...............Glass Compression Screw . . . . . Bronze Deflector . . . . . . . Copper/Bronze Bushing (K=2.8) . . . . . . . Bronze Operation The glass Bulb contains a fluid which expands when exposed to heat. When the rated temperature is reached, the fluid expands sufficiently to shatter the glass Bulb, allowing the sprinkler to activate and water to flow. Design Criteria The Series TY-FRB Pendent and Up- right Sprinklers are intended for fire protection systems designed in ac- cordance with the standard installation rules recognized by the applicable Listing or Approval agency (e.g., UL Listing is based on the requirements of NFPA 13, and FM Approval is based ontherequirementsofFM’sLossPre- vention Data Sheets ). Only the Style 10, 20, 30, or 40 Recessed Escutch- eon, as applicable, is to be used for recessed pendent installations. Page4of10 TFP171 † DuPont Registered Trademark FIGURE 5 QUICK RESPONSE SERIES TY-FRB UPRIGHT (TY4831) AND PENDENT (TY4931) SPRINKLERS 8.0 K-FACTOR, 1/2 INCH NPT 1-Frame 2-Button 3 - Sealing Assembly 4-Bulb 5 - Compression Screw 6 - Deflector *Temperature rating is indicated on deflector or adjacent to orifice seat on frame. (57,2 mm) 2-1/4" WRENCH (39,7 mm) 1-9/16" FLATS 7/16" (11,1 mm) NOMINAL MAKE-INNPT 1/2" 2-3/16" (55,6 mm) SSU DEFLECTOR DEFLECTOR SSP SECTIONPENDENT UPRIGHT CROSS 3 1 2 5 4 6 * * * TFP171 Page 5 of 10 TYPE TEMP.BULB LIQUID NATURAL BRASS CHROME PLATED WHITE*** POLYESTER 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C PENDENT (TY1231) and UPRIGHT (TY1131) SPRINKLER FINISH (See Note 7) 1, 2, 3, 5 Orange Red Yellow Green Blue RECESSED PENDENT (TY2231)* Figure 8 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C Orange Red Yellow Green NOTES: 1. Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers. 2. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL) as Quick Re- sponse Sprinklers. 3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprin- klers. 5. Approved by the City of New York under MEA 354-01-E. 7. Where Polyester Coated Sprinklers are noted to be UL and C-UL Listed, the sprin- klers are UL and C-UL Listed as Corrosion Resistant Sprinklers. * Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment Recessed Escutcheon, as applicable. ** Installed with Style 20 (1/2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable. *** Frame and Deflector only. Listings and approvals apply to color (Special Order). N/A: Not Available TABLE A LABORATORY LISTINGS AND APPROVALS 2.8 AND 4.2 K-FACTOR SPRINKLERS K 4.2 1/2" NPT PENDENT (TY2231) and UPRIGHT (TY2131) 135°F/57°C Orange 155°F/68°C Red 175°F/79°C Yellow 200°F/93°C Green 286°F/141°C Blue 1, 2 2.8 1/2" NPT 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C RECESSED PENDENT (TY2231)** Figure 9 Orange Red Yellow Green RECESSED PENDENT (TY1231)* Figure 6 RECESSED PENDENT (TY1231)** Figure 7 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C Orange Red Yellow Green Orange Red Yellow Green 1, 2, 5 Page6of10 TFP171 TYPE TEMP.BULB LIQUID NATURAL BRASS CHROME PLATED WHITE*** POLYESTER 155°F/68°C 175°F/79°C 200°F/93°C SPRINKLER FINISH (See Note 8) RECESSED PENDENT (TY3231)* Figure 10 135°F/57°C Orange Red Yellow Green 1, 2, 4, 5 NOTES: 1. Listed by Underwriters Laboratories, Inc. (UL) as Quick Response Sprinklers. 2. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL) as Quick Response Sprinklers. 3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers. 4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/04) as Quick Response Sprinklers; however, the LPCB does not rate the thermal sensitivity of recessed sprinklers. 5. Approved by the City of New York under MEA 354-01-E. 6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31-53-428-4444/Fax 31-53-428-3377). 7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/06) as Quick Response Sprinklers. 8. Where Polyester Coated and Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as Corrosion Resistant Sprinklers. Where Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as a Corrosion Resistant Sprinklers. * Installed with Style 10 (1/2" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment Recessed Escutcheon, as applicable. ** Installed with Style 20 (1/2" NPT) or Style 30 (3/4" NPT) 1/2" Total Adjustment Recessed Escutcheon, as applicable. *** Frame and Deflector only. Listings and approvals apply to color (Special Order). N/A: Not Available TABLE B LABORATORY LISTINGS AND APPROVALS 5.6 AND 8.0 K-FACTOR SPRINKLERS LEAD COATED N/A 1, 2, 3, 5 K 5.6 1/2" NPT PENDENT (TY3231) and UPRIGHT (TY3131) 135°F/57°C Orange 155°F/68°C Red 175°F/79°C Yellow 200°F/93°C Green 286°F/141°C Blue 1, 2, 3, 4, 5, 6, 7 RECESSED PENDENT (TY4231)* Figure 12 135°F/57°C 1, 2, 4, 5 Orange155°F/68°C Red175°F/79°C Yellow200°F/93°C N/A 8.0 3/4" NPT PENDENT (TY4231) and UPRIGHT (TY4131) 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C Blue Green Yellow Red Orange 1, 2, 3, 4, 5, 6, 7 1, 2, 5 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C Green RECESSED PENDENT (TY3231)** Figure 11 Orange Red Yellow Green 1, 2, 3, 4, 5 N/A Orange Red Yellow Green 1, 2, 3, 4, 5 N/A RECESSED PENDENT (TY4231)** Figure 13 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 1, 2, 4, 5 PENDENT (TY4931) and UPRIGHT (TY4831) 135°F/57°C 155°F/68°C 175°F/79°C 200°F/93°C 286°F/141°C Orange Red Yellow Green Blue 1, 2, 4, 5, 6 1, 2, 58.0 1/2" NPT Installation The Series TY-FRB Sprinklers must be installed in accordance with the fol- lowing instructions: NOTES Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprinkler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 inch (1,6 mm) for the 135°F/57°C to 3/32 inch (2,4 mm) for the 286°F/141°C temperature ratings. A leak tight 1/2 inch NPT sprinkler joint should be obtained with a torque of 7 to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi- mum of 21 ft. lbs. (28,5 Nm) of torque may be used to install sprinklers with 1/2 NPT connections. A leak tight 3/4 inch NPT sprinkler joint should be ob- tained with a torque of 10 to 20 ft.lbs. (13,4 to 26,8 Nm). A maximum of 30 ft.lbs. (40,7 Nm) of torque is to be used to install sprinklers with 3/4 NPT con- nections. Higher levels of torque may distort the sprinkler inlet and cause leakage or impairment of the sprinkler. Do not attempt to make-up for insuffi- cient adjustment in the escutcheon plate by under- or over-tightening the sprinkler. Readjust the position of the sprinkler fitting to suit. The Series TY-FRB Pendent and Up- right Sprinklers must be installed in accordance with the following instruc- tions. Step 1.Pendent sprinklers are to be installed in the pendent position, and upright sprinklers are to be installed in the upright position. Step 2.With pipe thread sealant ap- plied to the pipe threads, hand tighten the sprinkler into the sprinkler fitting. Step 3.Tighten the sprinkler into the sprinkler fitting using only the W-Type 6 Sprinkler Wrench (Ref. Figure 14). With reference to Figures 1, 2, 3, 4, and 5, the W-Type 6 Sprinkler Wrench is to be applied to the sprinkler wrench flats. The Series TY-FRB Recessed Pen- dent Sprinklers must be installed in accordance with the following instruc- tions. Step A.After installing the Style 10. 20, 30, or 40 Mounting Plate, as appli- cable, over the sprinkler threads and with pipe thread sealant applied to the pipe threads, hand tighten the sprin- kler into the sprinkler fitting. Step B. Tighten the sprinkler into the sprinkler fitting using only the W-Type 7 Recessed Sprinkler Wrench (Ref. Figure 15). With reference to Figure 1, 2, 3, and 4, the W-Type 7 Recessed TFP171 Page 7 of 10 TYPE NATURAL BRASS CHROME PLATED WHITE POLYESTER SPRINKLER FINISH RECESSED PENDENT (TY323) NOTES: 1. The maximum working pressure of 250 psi (17,2 bar) only applies to the Listing by Underwriters Laboratories Inc. (UL); the Listing by Underwriters Laboratories, Inc. for use in Canada (C-UL); and , the Approval by the City of New York. TABLE C, MAXIMUM WORKING PRESSURE LEAD COATED N/A K 2.8 1/2" NPT PENDENT (TY3231) and UPRIGHT (TY3131)175 PSI (12,1 BAR) RECESSED PENDENT (TY4231) N/A 4.2 3/4" NPT PENDENT (TY4231) and UPRIGHT (TY4131) 175 PSI (12,1 BAR) N/A N/A PENDENT (TY3231) and UPRIGHT (TY3131)5.6 1/2" NPT RECESSED PENDENT (TY3231) 8.0 3/4" NPT PENDENT (TY4231) and UPRIGHT (TY4131) RECESSED PENDENT (TY4231) 250 PSI (17,2 BAR) OR 175 PSI (12,1 BAR) (SEE NOTE 1) 175 PSI (12,1 BAR) 175 PSI (12,1 BAR) 175 PSI (12,1 BAR) 8.0 1/2" NPT PENDENT (TY4931) and UPRIGHT (TY4831) 175 PSI (12,1 BAR)175 PSI (12,1 BAR) Sprinkler Wrench is to be applied to the sprinkler wrench flats. Step C.After the ceiling has been in- stalled or the finish coat has been ap- plied, slide on the Style 10, 20, 30, or 40 Closure over the Series TY-FRB Sprinkler and push the Closure over the Mounting Plate until its flange comes in contact with the ceiling. Care and Maintenance The Series TY-FRB Sprinklers must be maintained and serviced in accord- ance with the following instructions: NOTES Before closing a fire protection system main control valve for maintenance work on the fire protection system that itcontrols,permissiontoshutdownthe affectedfireprotectionsystemmustbe obtained from the proper authorities and all personnel who may be affected by this action must be notified. The owner must assure that the sprin- klers are not used for hanging of any objects; otherwise, non-operation in theevent ofa fire or inadvertentopera- tion may result. Absence of an escutcheon, which is used to cover a clearance hole, may delay the time to sprinkler operation in a fire situation. Sprinklers that are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated or otherwise altered after leaving the factory. Modi- fied sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be replaced if they cannot be completely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid dam- age to the sprinklers - before, during, and after installation. Sprinklers dam- aged by dropping, striking, wrench twist/slippage, or the like, must be re- placed. Also, replace any sprinkler that has a cracked bulb or that has lost liquid from its bulb. (Ref. Installation Section). Frequent visual inspections are rec- ommended to be initially performed for corrosion resistant coated sprinklers, after the installation has been com- Page8of10 TFP171 FIGURE 7 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 2.8 K-FACTOR, 1/2 INCH NPT FIGURE 6 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 2.8 K-FACTOR, 1/2 INCH NPT (57,2 mm) 2-1/4" DIA. (73,0 mm) 2-7/8" DIA. SPRINKLER MOUNTING CLOSURE SERIES SURFACE FACE OF FITTING (15,9±6,4 mm) 5/8±1/4" (3,2 mm) 13/16" (20,6 mm) 1-5/16" (33,3 mm) PLATE MOUNTING 1/8" 1/4" (6,4 mm) 3/4" (19,1 mm) TY-FRB (12,7±3,2 mm) 1/2±1/8" 2-1/4" DIA. (57,2 mm) (73,0 mm) 2-7/8" DIA. SPRINKLER MOUNTING CLOSURE SURFACE FACE OF FITTING (3,2 mm) 1-1/16" (27,0 mm) 1-5/16" (33,3 mm) PLATE MOUNTING 1/8" 1/4" (6,4 mm) 1/2" (12,7 mm) TY-FRB SERIES FIGURE 8 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 4.2 K-FACTOR, 1/2 INCH NPT FIGURE 9 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 4.2 K-FACTOR, 1/2 INCH NPT (57,2 mm) 2-1/4" DIA. (73,0 mm) 2-7/8" DIA. SPRINKLER MOUNTING CLOSURE SERIES SURFACE FACE OF FITTING (15,9±6,4 mm) 5/8±1/4" (3,2 mm) 3/4" (19,1 mm) 1-1/4" (31,8 mm) PLATE MOUNTING 1/8" 1/4" (6,4 mm) 3/4" (19,1 mm) TY-FRB (12,7±3,2 mm) 1/2±1/8" 2-1/4" DIA. (57,2 mm) (73,0 mm) 2-7/8" DIA. SPRINKLER MOUNTING CLOSURE SURFACE FACE OF FITTING (3,2 mm) 1" (25,4 mm) 1-1/4" (31,8 mm) PLATE MOUNTING 1/8" 1/4" (6,4 mm) 1/2" (12,7 mm) TY-FRB SERIES pleted, to verify the integrity of the cor- rosion resistant coating. Thereafter, annual inspections per NFPA 25 should suffice; however, instead of in- specting from the floor level, a random sampling of close-up visual inspec- tions should be made, so as to better determine the exact sprinkler condi- tion and the long term integrity of the corrosion resistant coating, as it may be affected by the corrosive conditions present. The owner is responsible for the in- spection, testing, and maintenance of their fire protection system and de- vices in compliance with this docu- ment, as well as with the applicable standards of the National Fire Protec- tion Association (e.g., NFPA 25), in addition to the standards of any other authorities having jurisdiction. The in- stalling contractor or sprinkler manu- facturer should be contacted relative to any questions. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service in accordance with local requirements and/or national codes. TFP171 Page 9 of 10 FIGURE 14 W-TYPE 6 SPRINKLER WRENCH FIGURE 15 W-TYPE 7 RECESSED SPRINKLER WRENCH FIGURE 10 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 10 RECESSED ESCUTCHEON 5.6 K-FACTOR, 1/2 INCH NPT FIGURE 11 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 20 RECESSED ESCUTCHEON 5.6 K-FACTOR, 1/2 INCH NPT FIGURE 12 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 3/4 INCH TOTAL ADJUSTMENT STYLE 40 RECESSED ESCUTCHEON 8.0 K-FACTOR, 3/4 INCH NPT FIGURE 13 SERIES TY-FRB RECESSED PENDENT WITH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT STYLE 30 RECESSED ESCUTCHEON 8.0 K-FACTOR, 3/4 INCH NPT (57,2 mm) 2-1/4" DIA. (73,0 mm) 2-7/8" DIA. SPRINKLER MOUNTING CLOSURE SERIES SURFACE FACE OF FITTING (15,9±6,4 mm) 5/8±1/4" (3,2 mm) 3/4" (19,1 mm) 1-1/4" (31,8 mm) PLATE MOUNTING 1/8" 1/4" (6,4 mm) 3/4" (19,1 mm) TY-FRB (12,7±3,2 mm) 1/2±1/8" 2-1/4" DIA. (57,2 mm) (73,0 mm) 2-7/8" DIA. SPRINKLER MOUNTING CLOSURE SURFACE FACE OF FITTING (3,2 mm) 1" (25,4 mm) 1-1/4" (31,8 mm) PLATE MOUNTING 1/8" 1/4" (6,4 mm) 1/2" (12,7 mm) TY-FRB SERIES 2-7/8" DIA. (73,0 mm) 2-1/4" DIA. (57,2 mm) MOUNTING SPRINKLER CLOSURE SURFACE FITTING FACE OF (15,9±6,4 mm) 5/8±1/4" MOUNTING PLATE 1-5/16" (33,3 mm) 13/16" (20,6 mm) (3,2 mm) 1/8" 3/4" (19,1 mm) 1/4" (6,4 mm) SERIES TY-FRB 2-7/8" DIA. (73,0 mm) 2-1/4" DIA. (57,2 mm) MOUNTING SPRINKLER CLOSURE SURFACE FITTING FACE OF (12,7±3,2 mm) 1/2±1/8" 1-5/16" (33,3 mm) 1-1/16" (27,0 mm) MOUNTING PLATE (3,2 mm) 1/8" 1/2" (12,7 mm) 1/4" (6,4 mm) SERIES TY-FRB WRENCH RECESS (END "A" USED FOR 1/2" NPT MODELS) WRENCH RECESS (END "B" USED FOR 3/4" NPT MODELS) RECESS WRENCH WITH SPRINKLER ENGAGEMENT IN TO ENSURE WRENCHING AREA PUSH WRENCH Limited Warranty Products manufactured by Tyco Fire & Building Products (TFBP) are war- ranted solely to the original Buyer for ten (10) years against defects in mate- rial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFBP. No warranty is given for products or com- ponents manufactured by companies not affiliated by ownership with TFBP or for products and components which havebeensubjecttomisuse,improper installation,corrosion, or which have not been installed, maintained, modi- fied or repaired in accordance with ap- plicable Standards of the National Fire Protection Association, and/or the standards of any other Authorities Having Jurisdiction. Materials found by TFBP to be defective shall be either repaired or replaced, at TFBP’s sole option. TFBP neither assumes, nor authorizes anypersontoassumeforit, any other obligation in connection with the sale of products or parts of prod- ucts. TFBP shall not beresponsiblefor sprinkler system design errors or inac- curate or incomplete information sup- plied by Buyer or Buyer’s repre- sentatives. In no event shall TFBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect,specialorconsequentialdam- ages, including but not limited to labor charges, regardless of whether TFBP was informed about the possibility of such damages, and in no event shall TFBP’s liability exceed an amount equal to the sales price. Theforegoingwarrantyismadeinlieu of any and all other warranties, ex- press or implied, including warranties ofmerchantabilityandfitnessforapar- ticular purpose. This limited warranty sets forth the ex- clusive remedy for claims based on failure of or defect in products, materi- als or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full ex- tent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Procedure When placing an order, indicate the full product name. Refer to the Price List for complete listing of Part Num- bers. Contact your local distributor for avail- ability. Sprinkler Assemblies with NPT Thread Connections: Specify: (Specify Model/SIN), Quick Response, (specify K-factor), (specify temperature rating), Series TY-FRB (specify Pendent or Upright) Sprinkler with (specify type of finish or coating), P/N (specify from Table D). Recessed Escutcheon: Specify: Style (10, 20, 30, or 40) Re- cessed Escutcheon with (specify*) fin- ish, P/N (specify*). * Refer to Technical Data Sheet TFP770. Sprinkler Wrench: Specify: W-Type 6 Sprinkler Wrench, P/N 56-000-6-387. Specify: W-Type 7 Sprinkler Wrench, P/N 56-850-4-001. P/N 57 — XXX — X — XXX 155°F/68°C155 TEMPERATURE RATING 135°F/57°C135 1 SPRINKLER TABLE D PART NUMBER SELECTION SERIES TY-FRB PENDENT AND UPRIGHT SPRINKLERS 175°F/79°C 286 200°F/93°C200 286°F/141°C 175WHITE POLYESTER NATURAL BRASS 9 4 MODEL/SIN CHROME PLATED 7 LEAD COATED 390 8.0K UPRIGHT (3/4"NPT) 391 8.0K PENDENT (3/4"NPT) 330 2.8K UPRIGHT (1/2"NPT) 331 2.8K PENDENT (1/2"NPT) 370 5.6K UPRIGHT (1/2"NPT) 371 5.6K PENDENT (1/2"NPT) TY1131 TY1231 TY3131 TY3231 TY4131 TY4231 340 341 4.2K UPRIGHT (1/2"NPT) 4.2K PENDENT (1/2"NPT) TY2131 TY2231 3 WHITE (RAL9010)* * Eastern Hemisphere sales only. 360 8.0K UPRIGHT (1/2"NPT)TY4831 361 8.0K PENDENT (1/2"NPT)TY4931 Page 10 of 10 TFP171 TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 Series DS-1 — 5.6 K-factor Dry Type Sprinklers Quick Response, Standard Coverage Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 Page of 8 JANUARY, 2008 TFP50 IMPORTANTAlways refer to Technical Data Sheet TFP700 for the “INSTALLER WARNING” that provides cautions with respect to handling and instal-lation of sprinkler systems and com-ponents. Improper handling and in-stallation can permanently damage a sprinkler system or its compo-nents and cause the sprinkler to fail to operate in a fire situation or cause it to operate prematurely. General Description The Tyco® Series DS-1, 5.6 K-factor, Quick Response, Standard Coverage, Dry Type Sprinklers are decorative 3 mm glass bulb automatic sprinklers de-signed for the following typical uses: • where pendent sprinklers are re-quired on dry pipe systems that are exposed to freezing temperatures (e.g. sprinkler drops from unheated portions of buildings) • where sprinklers and/or a portion of the connecting piping may be exposed to freezing temperatures (e.g. sprinkler drops from wet sys-tems into freezers, sprinkler sprigs from wet systems into unheated attics, or horizontal piping exten-sions through a wall to protect an unheated area of a building) • where sprinklers are used on sys-tems that are seasonably drained to avoid freezing (e.g. vacation re-sort areas) WARNINGS The Series DS-1 Dry Type Sprinklers described herein must be installed and maintained in compliance with this document, as well as with the applica-ble standards of the National Fire Pro-tection Association, in addition to the standards of any other authorities hav-ing jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for maintain-ing their fire protection system and de-vices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. The Series DS-1 Dry Type Sprinklers must only be installed in fittings that meet the requirements of the Design Criteria section. Model/Sprinkler Identification Numbers TY3235 - (Pendent) TY3135 - (Upright) TY3335 - (Horizontal Sidewall) Technical Data Approvals UL and C-UL Listed. FM and NYC Approved. (Refer to Table A) Maximum Working Pressure 175 psi (12,1 bar) Inlet Thread Connection 1 inch NPT (Standard Order) ISO 7-R1 Discharge Coefficient K = 5.6 GPM/psi1/2 (80,6 LPM/bar1/2) Temperature Ratings Refer to Table A FinishesSprinkler: Natural Brass, Chrome Plated, White Polyester Escutcheon: White Coated or Chrome Plated, Brass Plated Physical Characteristics Inlet. . . . . . . . . . . . . . . . . . . . . . Copper Plug . . . . . . . . . . . . . . . . . . . . . Copper Yoke . . . . . . . . . . . . . . . Stainless Steel Casing . . . . .Galvanized Carbon Steel Insert . . . . . . . . . . . . . . . . . . . Bronze Bulb Seat . . . . . . . . . . .Stainless Steel Bulb . . . . . . . . . . . . . . . . . . . . . . .Glass Compression Screw . . . . . . . . .Bronze Deflector . . . . . . . . . . . . . . . . . Bronze Frame . . . . . . . . . . . . . . . . . . . .Bronze Guide Tube . . . . . . . . . .Stainless Steel Water Tube . . . . . . . . . .Stainless Steel Spring . . . . . . . . . . . . . .Stainless Steel Sealing Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .Beryllium Nickel w/Teflon* Escutcheon . . . . . . . . . .Carbon Steel *Registered Trademark of DuPont Patents U.S.A. Patent No. 5,188,185 TABLE A SERIES DS-1, QuIck RESPONSE - STANDARD cOVERAGE, DRY TYPE SPRINkLERS LABORATORY LISTINGS AND APPROVALS SPRINKLER FINISH TY3235 Pendent w/ Standard Recessed Escutcheon (Ref. Fig. 3) w/ Wide Flange Recessed Escutcheon (Ref. Fig. 4) TY3235 Pendent w/ Std. Escutcheon (Ref. Fig. 5) w/ Deep Escutcheon (Ref. Fig. 6) w/o Escutcheon (Ref. Fig. 7) TY3135 Upright w/o Escutcheon (Ref. Fig. 8) TY3335 Hor. Sidewall with top of Deflector-to-Ceiling distance of 4 to 12 inches (100 to 300 mm) w/ Std. Escutcheon (Ref. Fig. 9) w/ Deep Escutcheon (Ref. Fig. 10) w/o Escutcheon (Ref. Fig. 11) Temperature Rating Bulb Color Code Natural Brass Chrome Plated White Polyester Natural Brass Chrome Plated White Polyester Natural Brass Chrome Plated White Polyester 135°F/57°C Orange 1, 2, 3, 4 1, 2, 4 1, 2, 3, 4 1, 2, 4 1*, 2*, 3**, 4 1*, 2*, 4 155°F/68°C Red 1, 2, 3, 4 1, 2, 4 1, 2, 3, 4 1, 2, 4 1*, 2*, 3**, 4 1*, 2*, 4 175°F/79°C Yellow 1, 2, 3, 4 1, 2, 4 1, 2, 3, 4 1, 2, 4 1*, 2*, 3**, 4 1*, 2*, 4 200°F/93°C Green 1, 2, 3, 4 1, 2, 4 1, 2, 3, 4 1, 2, 4 1*, 2*, 3**, 4 1*, 2*, 4 286°F/141°C Blue N/A 1, 2, 3, 4 1, 2, 4 1*, 2*, 3**, 4 1*, 2*, 4 Notes: 1. Listed by Underwriters Laboratories, Inc (Maximum order length of 48 inches). 2. Listed by Underwriters Laboratories for use in Canada (Maximum order length of 48 inches). 3. Approved by Factory Mutual Research Corporation (Maximum order length of 48 inches) 4. Approved by the City of New York under MEA 352-01-E. * Light and Ordinary Hazard Occupancies Only. ** Light Hazard Occupancies Only. N/A - Not Available. WATER TUBE VENT HOLE GUIDE TUBE 3 mm INSERT YOKE SCREW INLET GASKETED SPRING PLUG WITH CASING DEFLECTOR BULB SPRING COMPRESSION SEAT PLATE SEAL BULB FRAME FIGuRE 1 SERIES DS-1 QuIck RESPONSE DRY TYPE SPRINkLER ASSEMBLY FIGuRE 2 W-TYPE 7 SPRINkLER WRENch RECESS WRENCH ENSURE ENGAGEMENT WITH PUSH WRENCH IN TO SPRINKLER WRENCH FLATS FLAT WRENCH Page 2 of 8 TFP50 FIGuRE 6 TY3235 PENDENT w/ DEEP EScuTchEON ORDER LENGTHS: INCREMENTS 4-1/4"±1/8"(108,0 ±3,2 mm) IN 1/4"(6,4 mm) (12,7 to 1168,4 mm)1/2"to 46" FACE OF CEILING CRITERIA SECTION) (REFER TO DESIGN SPRINKLER FITTING (88,9 mm)3-1/2"DIA. 2-1/2"DIA. (63,5 mm) FITTING FACE OF SPRINKLER FIGuRE 7 TY3235 PENDENT w/o EScuTchEON FIGuRE 8 TY3235 uPRIGhT w/o EScuTchEON FIGuRE 3 TY3235 PENDENT w/ STANDARD REcESSED EScuTchEON FIGuRE 4 TY3235 PENDENT w/ WIDE FLANGE REcESSED EScuTchEON FIGuRE 5 TY3235 PENDENT w/ STANDARD EScuTchEON ORDER LENGTHS: (63,5 to 1219,2 mm)2-1/2"to 48" IN 1/4"(6,4 mm) INCREMENTS FITTING FACE OF SPRINKLER SPRINKLER FITTING(REFER TO DESIGN CRITERIA SECTION) (76,2 mm) 3"DIA. 1-3/4"DIA.(44,5 mm) (55,6 ±3,2 mm)2-3/16"±1/8" CEILING FACE OF 2-1/4"DIA.(57,2 mm) 1-3/8"±1/8"(34,9 ±3,2 mm) 2-7/8"DIA. (73,0 mm) IN 1/4"(6,4 mm) 3-1/2"to 48" INCREMENTS (88,9 to 1219,2 mm) ORDER LENGTHS: CRITERIA SECTION) (REFER TO DESIGNSPRINKLERFITTING SPRINKLER FACE OF FITTING CEILING FACE OF ORDER LENGTHS: 3"DIA.(76,2 mm) 3-5/8"DIA. (92,1 mm) 3-1/2"to 48" (88,9 to 1219,2 mm) IN 1/4"(6,4 mm) (34,9 ±3,2 mm)1-3/8"±1/8" INCREMENTS SPRINKLER FITTING(REFER TO DESIGN CRITERIA SECTION) SPRINKLER FACE OF FITTING CEILING FACE OF TOP OF DEFLECTOR CRITERIA SECTION)(REFER TO DESIGNSPRINKLERFITTING SPRINKLER FITTING FACE OF IN 1/4"(6,4 mm) INCREMENTS (127,0 to 1219,2 mm)5"to 48" ORDER LENGTHS: SPRINKLER FITTING(REFER TO DESIGN CRITERIA SECTION) SPRINKLER FACE OF FITTING (127,0 to 1219,2 mm) INCREMENTS IN 1/4"(6,4 mm) ORDER LENGTHS:5"to 48" DEFLECTOR TO CEILING 1-3/4"(44,5 mm)MINIMUM TFP50 Page of 8 Operation When the Series DS-1 is in service, water is prevented from entering the assembly by the Plug & Belleville Seal-ing Assembly (Ref. Figure 1) in the Inlet of the Sprinkler. The glass Bulb contains a fluid that expands when exposed to heat. When the rated tem-perature is reached, the fluid expands sufficiently to shatter the glass Bulb, and the Bulb Seat is released. The compressed Spring is then able to ex-pand and push the Water Tube as well as the Guide Tube outward. This ac-tion simultaneously pulls inward on the Yoke, withdrawing the Plug & Belleville Seal from the Inlet allowing the sprin-kler to activate and flow water. Design Criteria The Tyco® Series DS-1 Sprinklers are intended for use in fire sprinkler sys-tems designed in accordance with the standard installation rules recognized by the applicable Listing or Approval agency (e.g., UL Listing is based on NFPA 13 requirements). The 1 inch NPT Series DS-1 Sprin-klers are to be installed in the 1 inch NPT outlet or run of malleable or duc-tile iron threaded tee fittings that meet the dimensional requirements of ANSI B16.3 (Class 150) or cast iron threaded tee fittings that meet the dimension-al requirements of ANSI B16.4 (Class 125). The Series DS-1 Sprinklers may also be installed in the 1 inch NPT out-let of a Grinnell Figure 730 Mechani-cal Tee; however, the use of the Figure 730 for this arrangement is limited to wet pipe systems. Typically, the end sprinkler fitting on a branch line is plugged as shown in Figures 3 through 11. The DS-1 Sprin-klers cannot be installed into an elbow fitting. For wet pipe systems, the sprinkler drop may be installed as shown in Fig-ure 12. The configuration in Figure 12 may only be used where the sprinkler fitting and water filled pipe above the sprinkler fitting is not subject to freez-ing and where the length of the DS-1 Sprinkler has the minimum exposure length per Figure 14. For wet pipe systems, the DS-1 Sprin-klers may also be installed in the fol-lowing Tyco® CPVC fittings: (P/N 80145) 1” x 1” NPT Female Adapter or (P/N 80249) 1” x 1” x 1” NPT Sprinkler Head Adapter Tee. For dry pipe systems, only use the side outlet of maximum 2-1/2 inch size 3.5° 5/16"(7,9 mm)CENTERLINE OF WATERWAY (76,2 mm) 3"DIA. 1-3/4"DIA. (44,5 mm) FITTING SPRINKLER FACE OF SPRINKLER FITTING CRITERIA SECTION) (REFER TO DESIGN 4"±1/8"(101,6 ±3,2 mm) 2-1/2"to 48"(63,5 to 1219,2 mm) IN 1/4"(6,4 mm)INCREMENTS ORDER LENGTHS: SURFACE MOUNTING FACE OF (88,9 mm)3-1/2"DIA. 2-1/2"DIA.(63,5 mm) 4-13/16"±1/8"(122,2 ±3,2 mm) 3.5° 5/16"(7,9 mm)CENTERLINE OF WATERWAY FACE OFSPRINKLER FITTING 1/2"to 45-3/4"(12,7 to 1162,1 mm) IN 1/4"(6,4 mm)INCREMENTS ORDER LENGTHS: (REFER TO DESIGN CRITERIA SECTION) FACE OF MOUNTING SURFACE SPRINKLER FITTING 3.5°5/16"(7,9 mm) CENTERLINE OF WATERWAY FITTING SPRINKLER FACE OF SPRINKLER FITTING CRITERIA SECTION)(REFER TO DESIGN 2-1/4"(57,2 mm) DEFLECTOR TO 5-1/2"to 48"(139,7 to 1219,2 mm) IN 1/4"(6,4 mm)INCREMENTS ORDER LENGTHS: MINIMUM MOUNTING SURFACE FIGuRE 9 TY3335 hORIZONAL SIDEWALL w/ STANDARD EScuTchEON FIGuRE 10 TY3335 hORIZONAL SIDEWALL w/ DEEP EScuTchEON FIGuRE 11 TY3335 hORIZONAL SIDEWALL w/o EScuTchEON Page of 8 TFP50 reducing tee’s when locating the DS-1 Sprinklers directly below the branch line. Otherwise, use the configuration shown in Figure 13 to assure complete drainage of water from above the DS-1 Sprinklers and the branch line. NOTEDo not install the Series DS-1 into any other type fitting without first consult-ing the Technical Services Depart-ment. Failure to use the appropriate fitting may result in: failure of the sprin-kler to properly operate due to forma-tion of ice over the inlet Plug or bind-ing of the inlet Plug; or, insufficient engagement of the inlet pipe threads with consequent leakage. Branch, cross, and feedmain piping connected to Dry Sprinklers and sub-ject to freezing temperatures must be pitched for drainage in accordance with the minimum requirements of the National Fire Protection Association for dry pipe sprinkler systems. When Dry Sprinklers are to be used in wet pipe sprinkler systems protect-ing areas subject to freezing tempera-tures (e.g., sprinkler drops into freez-ers), consideration must be given to the appropriate length of the sprinkler that will prevent freezing of the water in the connecting pipes due to conduc-tion. When the temperature surround-ing the wet pipe sprinkler system is maintained at a minimum temperature of 40°F/4°C, the following are the mini-mum recommended lengths between the face of the sprinkler fitting and the outside surface of the protected area (i.e., length exposed to minimum am-bient of 40°F/4°C – Ref. Figure 14): • 12 inches (300 mm) when the tem-perature within the protected area is -20°F/-29°C • 18 inches (450 mm) when the tem-perature within the protected area is -40°F/-40°C • 24 inches (600 mm) when the tem-perature within the protected area is -60°F/-51°C For protected area temperatures between those given above, the mini-mum recommended length from the face of the fitting to the outside of the protected area may be determined by interpolating between the indicated values. The 2007 edition of NFPA 13, Sec-tion 8.4.10.2 requires that dry sprin-klers connected to wet pipe sprinkler systems protecting insulated freezer structures have the clearance space around the sprinkler barrel be sealed. The use of the Model DSB-2 Dry Sprinkler Boot described in Technical Data Sheet TFP591, and illustrated in Figures 15 and 16, will meet the intent of NFPA 13. FIGuRE 12, SPRINkLER FITTING IN hEATED AREA HEATED AREA (SEE DESIGN CRITERIASECTION) FACE OF SPRINKLER FITTING LENGTHEXPOSURE DSB-2 INTENDED FOR FREEZER STRUCTURES FIGuRE 13, SPRINkLER FITTING IN uNhEATED AREA FIGuRE 14, ExPOSuRE LENGTh HEATED AREA SIDE OUTLET PLUGGED TO WET SYSTEM NPT TEE(SEE DESIGN CRITERIASECTION) 1 INCH DSB-2 INTENDED FOR FREEZER STRUCTURES AREA SUBJECT TO FREEZING RUNOUTLET PLUGGED TO DRYSYSTEM NPT TEE(SEE DESIGN CRITERIASECTION) 1 INCH DSB-2 INTENDED FOR FREEZER STRUCTURES INSULATED FREEZER STRUCTURE (ENDS ON OPPOSING SIDES OF STRAP TIES BOOT) ADHESIVE SHOWN WITH STANDARD ESCUTCHEON DS-1 1-3/4" DIA.(44,5 mm) CLEARANCEHOLE DSB-2 BOOT FIGuRE 15 MODEL DSB-2 SPRINkLER BOOT WITh PENDENT SERIES DS-1 DRY SPRINkLER FIGuRE 16 MODEL DSB-2 SPRINkLER BOOT WITh SIDEWALL SERIES DS-1 DRY SPRINkLER INSULATEDFREEZER STRUCTURE (ENDS ON OPPOSING SIDES OF STRAP TIES BOOT) ADHESIVE SHOWN WITH STANDARD ESCUTCHEON DS-1 1-3/4"DIA.(44,5 mm) CLEARANCE HOLE DSB-2 BOOT TFP50 Page 5 of 8 Installation The Series DS-1 Dry Type Sprinklers must be installed in accordance with the following instructions: NOTESThe Series DS-1 must only be installed in fittings that meet the requirements of the Design Criteria section. Refer to the Design Criteria section for other important requirements regard-ing piping design and sealing of the clearance space around the Sprinkler Casing. Do not install any bulb type sprinkler if the bulb is cracked or there is a loss of liquid from the bulb. With the sprinkler held horizontally, a small air bubble should be present. The diameter of the air bubble is approximately 1/16 inch (1,6 mm) for the 135°F/57°C rating to 1/8 inch (3,2 mm) for the 286°F/141°C rating. A 1 inch NPT sprinkler joint should be obtained with a minimum to maximum torque of 20 to 30 ft. lbs. (26,8 to 40,2 Nm). Higher levels of torque may dis-tort the sprinkler inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for in-sufficient adjustment in an Escutcheon Plate by under-or over-tightening the Sprinkler. Readjust the position of the sprinkler fitting to suit. Step 1. Pendent sprinklers must be installed only in the pendent posi-tion, and upright sprinklers must be in-stalled only in the upright position. The deflector of a pendent or upright sprin-kler is to be parallel to the ceiling. Horizontal sidewall sprinklers are to be installed in the horizontal position with their centerline of waterway perpen-dicular to the back wall and parallel to the ceiling. The word “TOP” on the De-flector is to face towards the ceiling. Step 2. With pipe thread sealant ap-plied to the inlet threads, hand tighten the sprinkler into the sprinkler fitting. Step 3. Wrench tighten the sprinkler by wrenching on the Casing with a pipe wrench whenever the casing is readily accessible. Otherwise, use a W-Type 7 Sprinkler Wrench (Ref. Figure 2). The wrench recess of the W-Type 7 is to be applied to the sprinkler wrench flats (Ref. Figure 2). Step 4. After the ceiling/wall has been installed/finished, slide on the outer piece of the Escutcheon until it comes in contact with the ceiling/wall. Do not lift the ceiling panel out of its normal position. In the case of the outer piece of the Deep Escutcheon, hold the outer piece in contact with the mounting sur-face (ceiling), and then rotate the in-ner piece approximately 1/4 turn with respect to the outer piece, to hold the Deep Escutcheon firmly together. Care and Maintenance The Tyco® Series DS-1 Dry Type Sprin-klers must be maintained and ser-viced in accordance with the following instructions: NOTES Absence of the outer piece of an es-cutcheon, which is used to cover a clearance hole, may delay the time to sprinkler operation in a fire situation. Before closing a fire protection sys-tem main control valve for mainte-nance work on the fire protection sys-tem that it controls, permission to shut down the affected fire protection sys-tems must be obtained from the prop-er authorities and all personnel who may be affected by this action must be notified. A Vent Hole is provided in the Bulb Seat (Ref. Figure 1) to indicate if the Dry Sprinkler is remaining dry. Evidence of leakage from the Vent Hole is an indi-cation that there may be weepage past the Inlet seal and that the sprinkler needs to be removed for determining the cause of leakage (e.g. an improp-er installation or an ice plug). The fire protection system control valve must be closed and the system drained be-fore removing the sprinkler. Sprinklers that are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or other-wise altered after leaving the factory. Modified sprinklers must be replaced. Sprinklers that have been exposed to corrosive products of combustion, but have not operated, should be com-pletely cleaned by wiping the sprinkler with a cloth or by brushing it with a soft bristle brush. Care must be exercised to avoid dam-age -before, during, and after instal-lation. Sprinklers damaged by drop-ping, striking, wrench twist/slippage, or the like, must be replaced. Also, re-place any sprinkler that has a cracked bulb or that has lost liquid from its bulb (Ref. Installation Section). The owner is responsible for the in-spection, testing, and maintenance of their fire protection system and devic-es in compliance with this document, as well as with the applicable stan-dards of the National Fire Protection Association (e.g., NFPA 25), in addition to the standards of any other authori-ties having jurisdiction. The installing contractor or sprinkler manufacturer should be contacted relative to any questions. Automatic sprinkler systems should be inspected, tested, and maintained by a qualified Inspection Service in accor-dance with local requirements and/or national codes. Page of 8 TFP50 Limited Warranty Products manufactured by Tyco Fire & Building Products (TFBP) are war-ranted solely to the original Buyer for ten (10) years against defects in mate-rial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFBP. No warran-ty is given for products or components manufactured by companies not af-filiated by ownership with TFBP or for products and components which have been subject to misuse, improper in-stallation, corrosion, or which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protec-tion Association, and/or the standards of any other Authorities Having Juris-diction. Materials found by TFBP to be defective shall be either repaired or re-placed, at TFBP’s sole option. TFBP neither assumes, nor authorizes any person to assume for it, any other ob-ligation in connection with the sale of products or parts of products. TFBP shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer’s representatives. In no event shall TFBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential dam-ages, including but not limited to labor charges, regardless of whether TFBP was informed about the possibility of such damages, and in no event shall TFBP’s liability exceed an amount equal to the sales price. The foregoing warranty is made in lieu of any and all other warranties, ex-press or implied, including warranties of merchantability and fitness for a particular purpose. This limited warranty sets forth the ex-clusive remedy for claims based on failure of or defect in products, materi-als or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full ex-tent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Procedure Dry Sprinklers:Contact your local distributor for availability, and please specify the following: 1. Sprinkler. • Model/SIN. • Quick Response, Standard Cover-age, Dry Type Sprinkler • Deflector Style. • 5.6 K-factor. • Order Length. Dry Type Sprinklers are furnished based upon Order Length as mea-sured per Figure 3 through 11, as applicable. After the measurement is taken, round it to the nearest 1/4 inch increment. • Inlet Connection (1 Inch NPT or ISO 7-R1). • Temperature Rating. • Sprinkler Finish. • Escutcheon Style and Finish, as applicable. • Part Number from Table B. (Part numbers are for 1 inch NPT stand-ard order sprinklers. Orders for all other sprinkler assemblies must be accompanied by a complete description.) 2. W-Type 7 Sprinkler Wrench. Refer to the Price List for complete listing of Part Numbers. Model DSB-2:Specify: Model DSB-2 Dry Sprinkler Boot*, P/N 63-000-0-002. * Includes one Boot, two Strap Ties, and 1/3 oz. of Adhesive (quantity of adhesive is sufficient for installing one Boot) TFP50 Page of 8 TABLE B PART NuMBER SELEcTION SERIES DS-1, QuIck RESPONSE, STANDARD cOVERAGE, DRY TYPE SPRINkLERS(use Prefix “I” for ISO 7-R1 connection, e.g., I-60-361-1-180) P/N 60 – XXX – X – XXX NOTES (1). Dry Type Sprinklers are furnished based upon “Order Length” as measured per Figures 3 through 11, as applicable, and for each individual sprinkler where it is to be installed. After the measurement is taken, round it to the nearest 1/4 inch increment. (2). Escutcheon Finish applies to sprinklers provided with escutcheons. (3). 286F/141C temperature rating applies to non-recessed sprinkler assemblies. * Eastern Hemisphere sales only. TEMPERATURE RATING (3) 0 135°F/57°C 1 155°F/68°C 2 175°F/79°C 3 200°F/93°C 4 286°F/141°C ORDER LENGTH (1) (EXAMPLES) 055 5.50” 082 8.25” 180 18.00” 187 18.75” 372 37.25” 480 48.00” MODEL/SIN 36 Pendent w/ Standard Escutcheon (1” NPT) TY3235 (Fig. 5) 33 Pendent w/ Deep Escutcheon (1” NPT) TY3235 (Fig. 6) 37 Pendent w/ Std. Recessed Escutcheon (1” NPT) TY3235 (Fig. 3) 32 Pendent w/o Escutcheon (1” NPT) TY3235 (Fig. 7) 34 Sidewall w/ Standard Escutcheon (1” NPT) TY3335 (Fig. 9) 43 Sidewall w/ Deep Escutcheon (1” NPT) TY3335 (Fig. 10) 44 Sidewall w/o Escutcheon (1” NPT) TY3335 (Fig. 11) 38 Upright w/o Escutcheon (1” NPT) TY3135 (Fig. 8) SPRINKLER FINISH ESCUTCHEON FINISH (2) 1 NATURAL BRASS WHITE 4 WHITE POLYESTER WHITE 9 CHROME PLATED CHROME 0 CHROME PLATED WHITE 3 WHITE (RAL9010)*WHITE (RAL9010)* 2 NATURAL BRASS BRASS PLATED Page 8 of 8 TFP50 © 2007-2008 TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale Pennsylvania 19446 Model PRV-1 Pressure Reducing Valve Pilot Operated, Globe and Angle Body Styles Page 1 of 16 MARCH 2015 TFP1580 Worldwide Contacts www.tyco-fire.com Typical applications • Within the main header (Ref. Figure 1) supplying wet pipe, dry pipe, deluge, or preaction system risers, and/or a standpipe system supplying hose connections • As part of a sectional floor control assembly (Ref. Figure 2) supply-ing sprinkler systems, and/or hose stations Features• Can be installed in vertical or hori-zontal orientation • Eliminates any required bleeding of trapped air from the diaphragm chamber during installation • Globe or angle pattern • Accurate pressure control • Standard nylon coated internal and external • One piece, one moving part diaphragm • In-line service • One pilot valve sub-assembly pro-vides for any outlet “set pressure”, that is, 80 to 225 psi (5,5 to 15,5 bar) NOTICE The TYCO Model PRV-1 Pressure Reducing Valves described herein must be installed and maintained in compli-ance with this document and with the applicable standards of the National Fire Protection Association, in addi-tion to the standards of any authorities having jurisdiction. Failure to do so may impair the performance of these devices. Owners are responsible for maintaining their fire protection system and devices in proper operating condition. Contact the installing contractor or sprinkler manufacturer with any questions. Due to the flow regulating characteris-tic of this device, its impact on system hydraulics should be carefully consid-ered, especially when retrofitted into existing systems. WARNING Adjustment of the Needle Valve is factory set and must not be altered. General Description The TYCO Model PRV-1 Pressure Reducing Valves, 2 through 8 Inch (DN50 through DN200), are factory-assembled and fully trimmed valve arrangements for pressure control. They are used on water filled pipe where it is necessary to reduce a higher inlet pressure to a lower delivery pressure under static and/or residual flowing conditions. The Model PRV-1 Valve is intended to automatically main-tain the outlet “set pressure” (static and residual) within a close range, regard-less of fluctuations in the higher pres-sure inlet line or varying flow rates. The Model PRV-1 Valve is provided with a factory outlet “set pressure” of 125 psi (8,6 bar); however, it may be field set to a nominal outlet “set pressure” of 80 to 225 psi (5,5 to 15,5 bar) per its FM Approval or 80 to 150 psi (5,5 to 10,3 bar) per its UL Listing. TFP1580Page 2 of 16 Technical Data ApprovalsUL and C-UL ListedFM Approved The UL Listing is based on: • Installation requirements referenced in the Standard for Installation of Sprinkler Systems, NFPA 13, or the Standard for Installation of Standpipe and Hose Valves, NFPA 14, as applicable. • Inspection, testing, and mainte-nance requirements referenced in the Standard for Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, NFPA 25. • Filed-setting of the Model PRV-1 Valve to provide required outlet pressures and flows for the given application. • Testing of the Model PRV-1 Valve after installation in accordance with NFPA 13 and/or NFPA 14 as applicable. • Testing the Model PRV-1 Valve tested periodically thereafter in accordance with NFPA 25. Maximum Inlet Pressure250 psi (17,2 bar) Factory Outlet “Set Pressure”125 psi (8,6 bar) Field Outlet “Set Pressure” Range80 to 225 psi (5,5 to 15,5 bar) per FM Approval, or 80 to 150 psi (5,5 to 10,3 bar) per UL Listing Pressure Loss With Inlet Pressure Above “Set Pressure”The inlet pressure minus the outlet “set pressure” equals pressure loss. For example, assuming that the inlet flowing pressure is 225 psi (15,5 bar) and the field outlet “set pressure” is 130 psi (9,0 bar), the pressure loss is 95 psi (6,5 bar). Pressure Loss with Inlet Pressure Below “Set Pressure”Refer to Graphs A through E. (These graphs are a requirement of UL and should be used as reference only.) Rated Flowing Range2 inch ..............0 to 250 GPM (DN50) ............ (0 to 946 LPM) 3 inch ..............0 to 550 GPM (DN80) ...........(0 to 2080 LPM) 4 inch .............0 to 1000 GPM (DN100) ...........(0 to 3785 LPM) 6 inch .............0 to 2200 GPM(DN150) ..........(0 to 8325 LPM) 8 inch .............0 to 4000 GPM (DN200) ..........(0 to 15140 LPM) End Connections• Threaded end connections are avail-able as NPT threaded or threaded per ISO 7-1. • Flanged end connections are avail-able as drilled per Table C. • Grooved end connections fol-low industry standard groove specifications. SECTIONAL FLOORCONTROL SECTIONAL FLOORCONTROL HOSEVALVE PRV-1 SECTIONAL CONTROL VALVE SPRINKLERS HOSEVALVE PRV-1 RELIEF VALVE RELIEF VALVE Z RISER MANIFOLDOR ZONE CHECK SPRINKLERS CHECK VALVE SECTIONALCONTROL VALVE CHECK VALVE MAIN HEADER PRV-1 HOSE STATIONS MAINDRAIN DRY PIPESPRINKLERRISER WET PIPESPRINKLERRISER MAIN CONTROL VALVE MAINDRAIN PRV-1 MAINCONTROLVALVE RELIEF VALVE FIGURE 2 TYPICAL SECTIONAL FLOOR CONTROL APPLICATION FIGURE 1 TYPICAL MAIN HEADER APPLICATION TFP1580Page 3 of 16 Body Style End Connection Nominal Valve Size 2 Inch (DN50)3 Inch (DN80)4 Inch (DN100)6 Inch (DN150)8 Inch (DN200) Globe Thread x Thread •N/A N/A N/A N/A Groove x Groove ••••N/A Flange x Flange N/A N/A ••• • = Available N/A = Not Available Body Style End Connection Nominal Valve Size 2 Inch (DN50)3 Inch (DN80)4 Inch (DN100)6 Inch (DN150)8 Inch (DN200) Globe Thread x Thread ••N/A N/A N/A Groove x Groove ••••N/A Flange x Flange N/A •••• Angle Thread x Thread ••N/A N/A N/A Groove x Groove ••••N/A Flange x Flange N/A •••N/A • = Available N/A = Not Available Nominal Valve Size Inches (DN) Flange Drilling Specification Nominal Dimensions in Inches and (mm) ANSI B16.1(1) (Class 125)ISO 7005-2 (PN10)(2)ISO 7005-2 (PN16)(3)JIS B 2210 (10K)AS 2129 (Table E) A B N A B N A B N A B N A B N 3(80)6.00 (152,4)0.75(19,0)4 USE ISO 7005-2 (PN16) 6.30 (160,0)0.75(19,0)8 N/A N/A 4(100)7.50 (190,5)0.75(19,0)8 7.09 (180,0)0.75(19,0)8 6.89 (175,0)0.60 (15,0)8 7.00 (178,0)0.71 (18,0)8 6(150)9.50 (241,3)0.88 (22,2)8 9.45 (240,0)0.91(23,0)8 9.45 (240,0)0.75(19,0)8 9.25 (235,0)0.87 (22,0)8 8(200)11.75 (298,5)0.88 (22,2)8 11.61 (295,0)0.91(23,0)8 11.61 (295,0)0.91(23,0)12 N/A 11.50 (292,0)0.87 (22,0)8 NOTES 1. Same drilling as for ANSI B16.5 (Class 150) and ANSI B16.42 (Class 150) 2. Same drilling as for BS 4504 Section 3.2 (PN10) and DIN 2532 (PN10) 3. Same drilling as for BS 4504 Section 3.2 (PN16) and DIN 2532 (PN16) Dim. ABolt Circle Diameter Dim. B Bolt Hole Diameter Qty. N Number ofBolt Holes TABLE A AVAILABLE SIZES AND CONFIGURATIONS NORTH AMERICA TABLE B AVAILABLE SIZES AND CONFIGURATIONS SOUTH AND CENTRAL AMERICA AND EASTERN HEMISPHERE TABLE C DIMENSIONAL SPECIFICATION FOR SELECTION OF FLANGE DRILLING TFP1580Page 4 of 16 4 8 8 1 4 84 QTY. 1 1 4 4 12111 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . .. . . . . . . . . . . . . .. . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 34 5 2 1 (a) 7 (b) 8 (c) 9 (d) (f) 1011 (e) 12 (g) KITDESCRIPTION Diaphragm Hex Bolt, 6 Inch Valve, M16 x 45 3 & 4 Inch Valves, 6 & 8 Inch Valves, M16 8 Inch Valve, M16 x 55 M16 x 55 2 Inch Valve, M12 x 35 Diaphragm CoverFlat Washer,2 Inch Valve, M123 & 4 Inch Valves, M16 Valve Body Hex Nut, M16,4 Inch Valve Only NO. CH CH CH VALVE PARTS NR CH CHCH (a) NR CH CH Diaphragm, REPLACEMENT PART KITS 2 Inch Valves3 Inch Valves4 Inch Valves 8 Inch Valves 6 Inch Valves DESCRIPTIONKIT 92-570-2-01192-570-2-01292-570-2-013 92-570-2-015 92-570-2-014 P/N Pilot Valve (c) Pilot Valve 92-570-2-200 Water Pressure Gauge (d) Water Pressure Gauge 92-570-2-211 Strainer (e) Strainer:92-570-2-202 Tubing and Fitting Kit, Pressure Sensor Insert (f) Excludes Items 7, 8, 9, 10 and 12Globe Style Valve:2 Inch Valve 92-570-3-001 92-570-3-004 92-570-3-005 92-570-3-00392-570-3-002 8 Inch Valve 6 Inch Valve4 Inch Valve3 Inch Valve 2 Inch Valve 6 Inch Valve4 Inch Valve 3 Inch Valve Angle Style Valve: Fits Either Body Style,Includes Item 2 only: Tubing and Fittings Pressure Sensor Insert: 92-571-3-00492-571-3-003 92-571-3-002 92-571-3-001 92-570-2-204 92-570-2-205 92-570-2-207 92-570-2-206 92-570-2-2033 Inch Valve 4 Inch Valve 6 Inch Valve 8 Inch Valve 2 Inch Valve 2, 3, & 4 Inch Valves6 & 8 Inch Valves 92-570-2-209 (b) NOTES:NR - Not ReplaceableCH - Common Hardware1.2. Install Item 8 in eld3. Needle Valve (g) Needle Valve 92-570-2-212 3 4, 5, 6 8 8 1 8 1 7 11 2 11 8 9 1 11111 10 12 127 4, 5, 6 3 2 ANGLE BODY STYLE GLOBE BODY STYLE ANGLEGLOBE STRAINERDETAILPRESSURE SENSORINSERT DETAIL INLET PRESSURE GAUGE INLETPRESSUREGAUGE OUTLET PRESSURE GAUGE DIAPHRAGMCHAMBER STRAINER(SEE DETAIL) STRAINER(SEE DETAIL)PRESSURE SENSOR INSERT (SEE DETAIL) PRESSURESENSOR INSERT(SEE DETAIL) UPSTREAM INLET CAVITY DOWNSTREAM OUTLET CAVITY DOWNSTREAMOUTLETCAVITY UPSTREAMINLETCAVITY OUTLET PRESSURE GAUGE ORIENT DIAPHRAGM TAB PERPENDICULAR TO OUTLET OUTLETOUTLET SENSORINLET FACESDOWNSTREAM INLET CAVITYINTERIOROUTLET CAVITYINTERIOR DIAPHRAGMCHAMBER FIGURE 3 MODEL PRV-1 PRESSURE REDUCING VALVE ASSEMBLY TFP1580Page 5 of 16 Materials of Construction (Refer to Figure 3)• The Body is RILSAN polyamide 11 coated, ductile iron per ASTM A 536-77, Grade 65-45-12. • The Diaphragm Cover is RILSAN polyamide 11 coated, ductile iron per ASTM A 536-77, Grade 65-45-12. • The Diaphragm is nylon fabric-rein-forced, natural rubber per ASTM D2000. Diaphragm Cover Fasteners are galvanized carbon steel. • The Pilot Valve is brass and stain-less steel with nylon fabric-rein-forced, natural rubber per ASTM D 2000 diaphragm. • The Strainer is brass and stainless steel. • Pressure Gauges have a 2-1/2 inch (65 mm) diameter, stainless steel case, and 0 to 350 psi (25 bar) pres-sure rating. • Tube, Fittings, and Needle Valve are copper, brass, and stainless steel. Operation With reference to Figure 4, the system water supply pressure from the inlet cavity of the Model PRV-1 Valve enters the Diaphragm Chamber through a Strainer and Needle Valve. The factory set Needle Valve provides the required orifice size for the supply line to the Diaphragm Chamber to optimize performance. Exit flow from the Diaphragm Chamber through the Pilot Valve is controlled by a regulating spring that is factory set, and subsequently field adjustable, to the desired downstream “set pressure” that is to be maintained. A sensing line connects the outlet of the Pilot Valve to the system piping downstream of the Model PRV-1 Valve via the Pressure Sensor Insert in the outlet cavity. When the downstream pressure rises above the “set pressure” of the spring, exit flow from the Diaphragm Chamber through the Pilot Valve to the Model PRV-1 Valve outlet cavity is stopped and pressure increases in the Diaphragm Chamber. When down-stream pressure falls below the “set pressure” of the spring, exit flow from the Diaphragm Chamber through the Pilot Valve to the Model PRV-1 Valve outlet cavity resumes and pressure in the Diaphragm Chamber decreases. The regulated flow through the Pilot Valve decreases and increases the pressure in the diaphragm chamber to sufficiently open and close the Model PRV-1 Valve, as required, to regulate the downstream “set pressure”. The operation sequence is as follows: • When there is no flow demand down-stream of the Model PRV-1 Valve, the Seat is closed and the Pilot Valve Seat is closed. With the Pilot Valve Seat closed, pressure is trapped in the Diaphragm Chamber to seat the Diaphragm and the Model PRV-1 Valve remains closed. SUPPLY LINE SPRING REGULATING VALVE PILOT EXIT FLOW SYSTEM SUPPLY WATER PRESSURE PRV-1 DIAPHRAGM SEAT PRV-1 SENSING LINE PILOT SEAT VALVE DIAPHRAGM CHAMBER LOCKNUT ADJUSTINGSCREW (FACTORY SET, DO NOT READJUST) NEEDLE VALVE CAPTAMPER PRESSUREGAUGE INLET GAUGEPRESSURE OUTLET OUTLET CAVITY DOWNSTREAM TO SYSTEM WATERFLOW UPSTREAM INLET CAVITYDOWNSTREAM)(INLET FACESSENSOR INSERT INTERIOR INLET CAVITYOUTLET CAVITY INTERIOR COMPONENTS SHOWN IN ALTERED POSITIONS ANDORIENTATIONS TO CLARIFY FUNCTION BODY VALVE SENSING LINE VALVE BODY SUPPLY LINESTRAINER DIAPHRAGM VALVE PILOT PRESSURE FIGURE 4 MODEL PRV-1 PRESSURE REDUCING VALVE OPERATION TFP1580Page 6 of 16 • When there is a flow demand down-stream of the Model PRV-1 Valve and the outlet pressure drops below the “set pressure”, the Pilot Valve Seat opens to relieve pressure from the Diaphragm Chamber allowing the Model PRV-1 Valve to open. • As the flow demand continues down-stream of the Model PRV-1 Valve and the “set pressure” is met, the Pilot Valve Seat closes. As the Pilot Valve Seat closes to reduce the opening, pressure is trapped in the Diaphragm Chamber at a point that allows the Diaphragm to remain lifted from the Model PRV-1 Valve Seat to retain the downstream “set pressure”. • Should the downstream pressure start to fall below the “set pres-sure”, the Pilot Valve Seat re-opens to allow for a decrease in pressure in the Diaphragm Chamber to allow the Model PRV-1 Valve to open fur-ther and then once again establish the downstream “set pressure”. • When the downstream pressure is at or above the “set pressure” and assuming there is a flow demand downstream of the Model PRV-1 Valve, the Pilot Valve Seat is closed to trap a sufficient pressure in the Diaphragm Chamber to allow the Model PRV-1 Valve to remain open to provide the “set pressure”. Design Considerations The following items must be consid-ered and applied accordingly for an installation that will be using the Model PRV-1 Pressure Reducing Valve: • The Model PRV-1 Valve may be installed vertically or horizontally and in any orientation without affecting its operating efficiency. When planning the positioning of the Model PRV-1 Valve, it is recommended that con-sideration be given to the viewing of the pressure gauges. Consideration should also be given to positioning the Model PRV-1 Valve so that the diaphragm cover is facing up. With the cover facing up, internal access is more easily achieved. • The Model PRV-1 Valve must be in an area that is easily accessible for maintenance purposes, not subject to freezing temperatures, and not subject to physical damage. • The valve is designed for fresh water service. When corrosive atmo-spheres and/or contaminated water supplies are present, it is the owner’s responsibility to verify compatibility with the pressure reducing valve, pilot valve, and trim. • The difference between the water supply pressure and the desired outlet (downstream) pressure must be 25 psi (1,7 bar) or greater per its FM Approval or 50 psi (3,4 bar) or greater per its UL Listing. The differ-ential maintains accuracy control of the discharging pressure over the full rated flowing range. • Cavitation may occur when the inlet pressure is greater than twice the “set pressure”. For this case, the pressure should be reduced in two steps by using two Model PRV-1 Valves in series. • When reducing pressure for a sprin-kler system, a 1/2 inch (DN15) or larger relief valve shall be located downstream of the Model PRV-1 Valve. The relief valve shall be set at a pressure equal to the lowest pres-sure rated component downstream of the Model PRV-1 Valve. Note: FM Approval is based on the use of the 1/2 inch Watts Regulator, Series 530C Pressure Relief Valve. • When reducing pressure for a sprin-kler system, a listed indicating valve shall be provided on the inlet side of the Model PRV-1 Valve. • When reducing pressure for a sprin-kler system, means shall be provided downstream of the Model PRV-1 Valve to facilitate a flow test at the sprinkler system demand. Installation The TYCO Model PRV-1 Pressure Reducing Valve must be installed with the flow arrow located on the Diaphragm Cover pointing in the intended direction of flow. Installation dimensions are provided in Figures 5 and 6. Before the Model PRV-1 Valve is installed, pipe lines should be flushed of all chips, scale and foreign matter. Care must be exercised to assure that the trim is not damaged during installation. NOTICE Do not lift the valve by its trim. Otherwise, the trim may be damaged and impair system operation. The inlet and outlet connections must be made based on the direction of flow arrow provided on the Diaphragm Cover. The valve cannot operate if connected backwards. Do not alter the trim. Altering the trim may render the valve ineffective and impair the system operation. Placing the Valve in Service Perform the following 13 Steps when placing the TYCO Model PRV-1 Pressure Reducing Valve in service. WARNING Downstream pressure adjustment is only to be performed by experienced personnel who understand the impact of adjusting the downstream pressure and who take full responsibility of the readjustment from the factory setting. The Pilot Valve is provided with a Tamper Cap, which upon removal will allow for field adjustment by using the Adjusting Screw. Adjustment of the Needle Valve is factory set and must not be altered. Per the requirements of NFPA 13, a means shall be provided downstream of the Model PRV-1 Valve to simulate the sprinkler system demand. In the case of hose stations, the opening of a hose valve or multiple hose valves, as required, will be necessary to simulate hose stream demand. For the purposes of the following instruction, the opening of a “flow test valve” simulates either the sprinkler demand or hose stream demand, as applicable. The sprinkler demand or hose stream demand must be at least 50 GPM (190 LPM) for 2 to 6 inch (DN50 to DN150) valves and at least 100 GPM (380 LPM) for 8 inch (DN200) valves. There is no need to vent any trapped air from the Diaphragm Chamber. Filling the System Step 1. Install gauges at the Pilot Valve and inlet Sensing Line. Apply thread-sealant to the male end of the threads. Ensure the pips on the pressure gauges are in the upright position. Step 2. Verify that downstream drain valves are closed and that there are no leaks. Step 3. Partially open a valve or valves at the end of the system (such as, an inspector’s test connection on a wet pipe system) to allow trapped air to escape when filling the system. Step 4. Slowly and partially open the water supply control valve feeding the Model PRV-1 Valve. Step 5. After the system fills with water, close the valve or valves that had been partially opened in Step 2. Step 6. Completely open the main water supply control valve feeding the Model PRV-1 Valve. TFP1580Page 7 of 16 Adjusting Downstream Pressure NOTICE After any downstream pressure adjust-ment, the following items are to be recorded on a tag attached to the valve: • Valve installation location • Inlet static pressure • Outlet static pressure • Inlet residual pressure • Outlet residual pressure • Intended outlet flow The tag is not to be removed until after the system has been accepted by the authority having jurisdiction. It is rec-ommended that the tag not be removed even after acceptance by the author-ity having jurisdiction unless another means of record keeping is maintained. Step 1. Remove the Tamper Cap from the Pilot Valve by first loosening its set screw and then unscrewing the Tamper Cap. Step 2. Open the “flow test valve” to simulate either the desired sprinkler demand or hose stream demand. Step 3. If surging flow occurs, attempt to bleed trapped air from the system via the inspector’s test valve and any other valve that can vent trapped air. Step 4. Loosen the locknut on the adjusting screw of the Pilot Valve. Step 5. Turn the adjusting screw clock-wise to increase outlet pressure or counterclockwise to decrease outlet pressure. Step 6. After achieving the desired per-formance, tighten the locknut on the adjusting screw. Step 7. Close the “flow test valve”. Observe the outlet pressure gauge and compare to the required “set pressure”. If the required “set pressure” is not achieved, repeat Step 8 and proceed accordingly. Replace the Tamper Cap and tighten its set screw. The pressure reducing valve is now set for service. Due to the spring tolerance within the Pilot Valve, it may be necessary to alternate back and forth between resid-ual and static conditions to achieve the desired “set pressure” for both residual and static conditions. Care and Maintenance The TYCO Model PRV-1 Pressure Reducing Valve must be maintained and serviced in accordance with this section. Before closing a fire protection system main control valve for maintenance work on the fire protection system that it controls, obtain permission to shut down the affected fire protection system from the proper authorities and notify all personnel who may be affected by this action. NOTICE Inspection, testing, and maintenance must be performed in accordance with the requirements of the NFPA, and any impairment must be immediately corrected. Responsibility lies with sprinkler owners for the inspection, testing, and mainte-nance of their fire protection system and devices in compliance with this document, as well as with the appli-cable standards of the National Fire Protection Association (for example, NFPA 25), in addition to the standards of any other authorities having juris-diction. Contact the installing contrac-tor or product manufacturer with any questions. Automatic sprinkler systems are recom-mended to be inspected, tested, and maintained by a qualified Inspection Service in accordance with local requirements and/or national code. The Model PRV-1 Pressure Reducing Valve requires no lubrication, packing or preventative maintenance; however, replacement of the diaphragm every five years is recommended. Flow TestsFlow tests per NFPA are required every five years, at which point the outlet pressure is compared to previous tests. If necessary the Model PRV-1 Valve can be readjusted following the Placing the Valve in Service section. If the desired pressure cannot be achieved, the Diaphragm and/or Pilot Valve should be replaced. Diaphragm ReplacementPrior to replacing the Diaphragm, the Model PRV-1 Valve must be taken out of service and completely drained. With reference to Figure 3, the Diaphragm Tab is oriented perpendicular to the outlet flow. When reinstalling the Diaphragm Cover, the Diaphragm Cover Fasteners must be uniformly and securely tightened using a cross-draw sequence. After tightening, double check to make certain that all of the Diaphragm Cover fasteners are securely tightened. Pilot Valve ReplacementPrior to removing the Pilot Valve, the Model PRV-1 Valve must be taken out of service and completely drained. When installing the replacement Pilot Valve, the trim components must be replaced exactly as they were. After reinstalling the Pilot Valve and before returning the Model PRV-1 Valve into service, completely unscrew the Adjusting Screw of the replacement Pilot Valve so as to obtain a minimum outlet “set pressure”. Then proceed to use the instructions under Placing The Valve In Service section to place the Model PRV-1 Valve in service. NOTICE The Pilot Valve is not field repairable. Attempting to repair the Pilot Valve may render the valve ineffective and impair the system operation. Completely unscrewing the Adjusting Screw of the replacement Pilot Valve will help to avoid an accidental over pressurization of the system piping prior to achieving the desired “set pressure”. TFP1580Page 8 of 16 Thread x Thread End Connections D F E A B C Nominal Valve Sizes Inches (DN) Nominal Installation Dimensions in Inches and (mm)Approx. Weight lbs (kg)A B C D E F 2 (50)7.51 (191)1.49 (38)7.32 (186)6.41 (163)8.18 (208)2.36 (60)15.2 (6,9) 3 (80)11.14 (283)1.77 (45)8.19 (208)7.48 (190)9.25 (235)3.93 (100)30.6 (13,9) Groove x Groove End Connections Nominal Valve Sizes Inches (DN) Nominal Installation Dimensions in Inches and (mm)Approx. Weight lbs (kg)A B C D E F 2 (50)7.51 (191)1.49 (38)7.32 (186)6.41 (163)8.18 (208)2.36 (60)15.2 (6,9) 3 (80)11.14 (283)1.77 (45)8.19 (208)7.48 (190)9.25 (235)3.93 (100)30.6 (13,9) 4 (100)13.62 (346)2.24 (57)8.70 (221)7.91 (201)9.68 (246)4.52 (115)45.2 (20,5) 6 (150)16.25 (413)3.30 (84)9.88 (251)6.73 (171)11.49 (292)5.90 (150)118.0 (53,5) Flange x Flange End Connections Nominal Valve Sizes Inches (DN) Nominal Installation Dimensions in Inches and (mm)Approx. Weight lbs (kg)A B C D E F 3 (80)11.14 (283)3.93 (100)8.19 (208)7.48 (190)9.25 (235)3.93 (100)46.3 (21,0) 4 (100)12.00 (305)4.37 (111)8.70 (221)7.91 (201)9.68 (246)4.52 (115)65.0 (29,5) 6 (150)15.98 (406)5.59 (142)9.88 (251)6.73 (171)11.49 (292)5.90 (150)118.0 (53,5) 8 (200)18.50 (470)6.69 (170)11.14 (283)7.16 (182)12.55 (319)6.96 (177)166.5 (75,5) FIGURE 5 MODEL PRV-1 PRESSURE REDUCING VALVE GLOVE STYLE INSTALLATION DIMENSIONS TFP1580Page 9 of 16 Thread x Thread End Connections GD F E B C A Nominal Valve Sizes Inches (DN) Nominal Installation Dimensions in Inches and (mm)Approx. Weight lbs (kg)A B C D E F G 2 (50)3.54 (90)3.18 (81)7.32 (186)6.41 (163)8.18 (208)2.40 (61)2.40 (61)15.9 (7,2) 3 (80)6.06 (154)4.52 (115)8.19 (208)7.48 (190)9.25 (235)3.93 (100)3.93 (100)34.1 (15,5) Groove x Groove End Connections Nominal Valve Sizes Inches (DN) Nominal Installation Dimensions in Inches and (mm)Approx. Weight lbs (kg)A B C D E F G 2 (50)3.54 (90)3.18 (81)7.32 (186)6.41 (163)8.18 (208)2.40 (61)2.40 (61)15.9 (7,2) 3 (80)6.06 (154)4.52 (115)8.19 (208)7.48 (190)9.25 (235)3.93 (100)3.93 (100)34.1 (15,5) 4 (100)6.33 (161)4.56 (116)8.70 (221)7.91 (201)9.68 (246)4.52 (115)4.52 (115)44.0 (19,9) 6 (150)8.89 (226)6.69 (170)9.88 (251)6.73 (171)11.49 (292)5.90 (150)5.90 (150)89.3 (40,5) Flange x Flange End Connections Nominal Valve Sizes Inches (DN) Nominal Installation Dimensions in Inches and (mm)Approx. Weight lbs (kg)A B C D E F G 3 (80)6.06 (154)4.52 (115)8.19 (208)7.48 (190)9.25 (235)3.93 (100)3.93 (100)35.1 (15,9) 4 (100)6.33 (161)4.56 (116)8.70 (221)7.91 (201)9.68 (246)4.52 (115)4.52 (115)67.3 (30,5) 6 (150)8.89 (226)6.69 (170)9.88 (251)6.73 (171)11.49 (292)5.90 (150)5.90 (150)116.2 (52,7) FIGURE 6 MODEL PRV-1 PRESSURE REDUCING VALVE ANGLE STYLE INSTALLATION DIMENSIONS TFP1580Page 10 of 16 225200175150125100755025 2500 1 GPM = 3,785 LPM1 PSI = 0,06895 BAR 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) A B C B = 100 PSI INLET PRESSUREA = 140 PSI INLET PRESSURE C = 50 PSI INLET PRESSURE 1 GPM = 3,785 LPM FLOW RATE IN GALLONS PER MINUTE (GPM) 0 1 PSI = 0,06895 BAR 250255075100125150175200225OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)40 20 0 10 30 130 110 120 90 70 80 100 60 50 140 B = 50 PSI INLET PRESSUREA = 70 PSI INLET PRESSURE A B GRAPH A-1 2 INCH (DN50) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 80 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) GRAPH A-2 2 INCH (DN50) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 150 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) TFP1580Page 11 of 16 1 GPM = 3,785 LPM 0 1 PSI = 0,06895 BAR 55050100150200250300350400450500 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) B = 50 PSI INLET PRESSURE A = 70 PSI INLET PRESSURE A B 550500450400350300250200150100500 1 PSI = 0,06895 BAR 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) 1 GPM = 3,785 LPM A B = 100 PSI INLET PRESSURE A = 140 PSI INLET PRESSURE C = 50 PSI INLET PRESSURE B C GRAPH B-1 3 INCH (DN80) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 80 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) GRAPH B-2 3 INCH (DN80) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 150 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) TFP1580Page 12 of 16 0 1000 1 GPM = 3,785 LPM1 PSI = 0,06895 BAR 100 200 300 400 500 600 700 800 900 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) B = 50 PSI INLET PRESSURE A = 70 PSI INLET PRESSURE A B 1 PSI = 0,06895 BAR 4003002001000 900800700600500 1000 1 GPM = 3,785 LPM 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 A = 140 PSI INLET PRESSURE B = 100 PSI INLET PRESSUREC = 50 PSI INLET PRESSURE FLOW RATE IN GALLONS PER MINUTE (GPM) A B C GRAPH C-1 4 INCH (DN100) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 80 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) GRAPH C-2 4 INCH (DN100) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 150 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) TFP1580Page 13 of 16 225020001750150012501000750500250 25000 1 GPM = 3,785 LPM1 PSI = 0,06895 BAR 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) B = 50 PSI INLET PRESSUREA = 70 PSI INLET PRESSURE A B 25002250200017501500125010007505002500 1 GPM = 3,785 LPM1 PSI = 0,06895 BAR 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) A = 140 PSI INLET PRESSURE B = 100 PSI INLET PRESSURE C = 50 PSI INLET PRESSURE A C B GRAPH D-1 6 INCH (DN150) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 80 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) GRAPH D-2 6 INCH (DN150) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 150 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) TFP1580Page 14 of 16 10005000 1500 2000 2500 3000 3500 4000 1 GPM = 3,785 LPM1 PSI = 0,06895 BAR 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) B = 50 PSI INLET PRESSUREA = 70 PSI INLET PRESSURE A B 1 GPM = 3,785 LPM 0 1 PSI = 0,06895 BAR 4000500100015002000250030003500 40 OUTLET PRESSURE IN POUNDS PER SQUARE INCH (PSI)0 10 20 30 50 60 70 80 90 100 110 120 130 140 FLOW RATE IN GALLONS PER MINUTE (GPM) A = 140 PSI INLET PRESSURE B = 100 PSI INLET PRESSURE C = 50 PSI INLET PRESSURE A B C GRAPH E-1 8 INCH (DN200) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 80 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) GRAPH E-2 8 INCH (DN200) MODEL PRV-1 PRESSURE REDUCING VALVE OUTLET PRESSURE VERSES FLOW SHOULD INLET PRESSURE FALL BELOW A SET PRESSURE OF 150 PSI (THIS GRAPH IS A REQUIREMENT OF UL AND SHOULD BE USED AS REFERENCE ONLY) TFP1580Page 15 of 16 Ordering Procedure North America Pressure Reducing ValveSpecify: Globe Type, (specify size), 125 psi Outlet “Set Pressure” with (T x T, G x G, or F x F) Connection, P/N (specify from below). 2 Inch T x T NPT ...................P/N 52-570-8-060 2 Inch G x G2.37 inch (60,3 mm)Groove O.D. ............P/N 52-570-8-920 3 Inch G x G3.50 inch (88,9 mm)Groove O.D. ............P/N 52-570-8-922 4 Inch G x G4.50 inch (114,3 mm)Groove O.D. ............P/N 52-570-8-923 4 Inch F x FANSI Flange ............P/N 52-570-8-023 6 Inch G x G6.62 inch (168,3 mm)Groove O.D. ............P/N 52-570-8-925 6 Inch F x FANSI Flange. ............P/N 52-570-8-025 8 Inch F x FANSI Flange ............P/N 52-570-8-026 Pressure Relief ValveSpecify: 1/2 inch (DN15) Watts Regulator, Series 530C Pressure Relief Valve for use downstream of a Model PRV-1 Valve being used for reduc-ing pressure in sprinkler system, P/N 20608. Replacement Valve PartsSpecify: (description) for use with (specify) size Model PRV-1 Pressure Reducing Valve, P/N (see Figure 3). South America, Central America and Eastern Hemisphere Pressure Reducing ValveSpecify: (Globe or Angle) Type, (specify size), 125 psi Outlet “Set Pressure” with (specify) Connection (and for flanged valves specify flange drilling), P/N (specify from complete listing on Page 16). • Valve Type & Size (Globe, 2, 3, 4, 6, or 8 Inch)(Angle, 2, 3, 4, or 6 Inch • 125 psi Outlet “Set Pressure” Pressure • Connection Type (Threaded, Grooved, Flanged) For threaded, specify NPT or ISO For grooved, specify O.D. Pipe Size 2 inch (DN50): 2.88 inch (60,3 mm) O.D. 3 inch (DN80): 3.50 inch (88,9 mm) O.D. 4 inch (DN100): 4.50 inch (114,3 mm) O.D. 6 inch (DN150): 6.62 inch (168,3 mm) O.D. or 6.50 inch (165,1 mm) O.D. 8 inch (DN200): 8.62 inch (219,1 mm) O.D. For flanged, specify flange drilling per ANSI B16-1 (Class 125) ISO 7005-2 (PN16) ISO 7005-2 (PN10), 8 inch valve only JIS B2210 (10K) AS 2129 (Table E) Refer to Table C for flange drilling dimensional specifications. Pressure Relief ValveSpecify: 1/2 inch (DN15) Watts Regulator, Series 530C Pressure Relief Valve for use downstream of a Model PRV-1 Valve being used for reduc-ing pressure in sprinkler system, P/N 20608. Replacement Valve PartsSpecify: (description) for use with (specify) size Model PRV-1 Pressure Reducing Valve, P/N (see Figure 3). Limited Warranty For warranty terms and conditions, visit www.tyco-fire.com. GLOBAL HEADQUARTERS | 1400 Pennbrook Parkway, Lansdale, PA 19446 | Telephone +1-215-362-0700 TFP1580Page 16 of 16 Copyright © 2015 Tyco Fire Products, LP. All rights reserved.RILSAN is a registered trademark of Arkema, Inc Angle Body Style 2 Inch T x TNPT ...................P/N 52-571-8-060 2 Inch T x T ISO ...................P/N 52-571-8-160 2 Inch G x G2.37 inch (60,3 mm)Groove O.D. ............P/N 52-571-8-920 3 Inch T x TNPT ...................P/N 52-571-8-062 3 Inch T x TISO ...................P/N 52-571-8-162 3 Inch G x G3.50 inch (88,9 mm)Groove O.D. ............P/N 52-571-8-922 3 Inch F x FANSI Flange ............P/N 52-571-8-022 3 Inch F x FISO (PN16) Flange . . . . . . . P/N 52-571-8-112 3 Inch F x FJIS Flange ..............P/N 52-571-8-722 3 Inch F x FAS Flange ..............P/N 52-571-8-522 4 Inch G x G4.50 inch (114,3 mm)Groove O.D. ............P/N 52-571-8-923 4 Inch F x FANSI Flange ............P/N 52-571-8-023 4 Inch F x FISO (PN16) Flange . . . . . . . P/N 52-571-8-113 4 Inch F x FJIS Flange ..............P/N 52-571-8-723 4 Inch F x FAS Flange ..............P/N 52-571-8-523 6 Inch G x G6.62 inch (168,3 mm)Groove O.D. ............P/N 52-571-8-925 6 Inch G x G6.50 inch (165,1 mm)Groove O.D. ............P/N 52-571-8-945 6 Inch F x FANSI Flange ............P/N 52-571-8-025 6 Inch F x F ISO (PN16) Flange . . . . . . . P/N 52-571-8-115 6 Inch F x FJIS Flange ..............P/N 52-571-8-725 6 Inch F x FAS Flange ..............P/N 52-571-8-525 Globe Body Style 2 Inch T x TNPT ...................P/N 52-570-8-060 2 Inch T x T ISO ...................P/N 52-570-8-160 2 Inch G x G2.37 inch (60,3 mm)Groove O.D. ............P/N 52-570-8-920 3 Inch T x TNPT ...................P/N 52-570-8-062 3 Inch T x TISO ...................P/N 52-570-8-162 3 Inch G x G3.50 inch (88,9 mm)Groove O.D. ............P/N 52-570-8-922 3 Inch F x FANSI Flange ............P/N 52-570-8-022 3 Inch F x FISO (PN16) Flange . . . . . . .P/N 52-570-8-112 3 Inch F x FJIS Flange ..............P/N 52-570-8-722 3 Inch F x FAS Flange ..............P/N 52-570-8-522 4 Inch G x G4.50 inch (114,3 mm)Groove O.D. ............P/N 52-570-8-923 4 Inch F x FANSI Flange ............P/N 52-570-8-023 4 Inch F x FISO (PN16) Flange . . . . . . .P/N 52-570-8-113 4 Inch F x FJIS Flange ..............P/N 52-570-8-723 4 Inch F x FAS Flange ..............P/N 52-570-8-523 6 Inch G x G6.62 inch (168,3 mm)Groove O.D. ............P/N 52-570-8-925 6 Inch G x G6.50 inch (165,1 mm)Groove O.D. ............P/N 52-570-8-945 6 Inch F x FANSI Flange ............P/N 52-570-8-025 6 Inch F x F ISO (PN16) Flange . . . . . . .P/N 52-570-8-115 6 Inch F x FJIS Flange ..............P/N 52-570-8-725 6 Inch F x FAS Flange ..............P/N 52-570-8-525 8 Inch F x FANSI Flange ............P/N 52-570-8-026 8 Inch F x FISO (PN10) Flange . . . . . . .P/N 52-570-8-116 8 Inch F x FISO (PN16) Flange . . . . . . .P/N 52-570-8-126 8 Inch F x FJIS Flange ..............P/N 52-570-8-726 8 Inch F x FAS Flange ..............P/N 52-570-8-526 Technical Data ModelBFV-N Sizes: ANSI Inches / DN 2-1/2 (DN65), 3 (DN80), 4 (DN100), 5 (DN125), 6 (DN150), 8 (DN200), 10 (DN250) ApprovalsThe 2-1/2 through 10 inch (DN65 - DN250) Model BFV-N Grooved End Butterfly Valves are UL and C-UL List-ed and FM Approved. In addition, the Model BFV-N Grooved End Butterfly Valves are listed by the California State Fire Marshall under Listing No. 7770-1670:100. All laboratory listings and approvals are for indoor and outdoor use. Maximum Working Pressure • 2-1/2 - 8 Inch (DN65 - DN200): 300 psi (20,7) bar • 10 Inch (DN250): 175 psi (12,0 bar) Materials of Construction: BodyDuctile iron conforming to ASTM A-395 Body CoatingPolyamide DiscDuctile iron conforming to ASTM A-395 Disc SealGrade EPDM “E” encapsulated rubber conforming to ASTM D-2000 Upper & Lower StemType 416 Stainless Steel conforming to ASTM 582 Lower PlugPVC OperatorGear operator with iron housing General Description The Model BFV-N Grooved End But-terfly Valves (Ref. Figure 1) are indicat-ing type valves designed for use in fire protection systems where a visual in-dication is required as to whether the valve is open or closed. They are used, for example, as system, sectional, and pump water control valves. They have cut groove inlet and outlet connections that are suitable for use with grooved end pipe couplings that are listed and approved for fire protection systems. For applications requiring supervision of the open position of the valve, the Gear Operators for the Model BFV-N Butterfly Valves are provided with two sets of factory installed internal switches each having SPDT contacts. The supervisory switches transfer their electrical contacts when there is move-ment from the valve’s normal open po-sition during the first two revolutions of the handwheel. WARNINGSThe Model BFV-N Grooved End But-terfly Valves described herein must be installed and maintained in compliance with this document, as well as with the applicable standards of the National Fire Protection Association, in addition to the standards of any other authori-ties having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for maintain-ing their fire protection system and de-vices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. Friction LossThe approximate friction loss, based on the Hazen Williams formula and ex-pressed in equivalent length of pipe with C= 120, is as follows. The data is based on friction loss information col-lected at a typical flow rate of 15 feet per second. • 6.9 feet of 2-1/2 inch Sch. 40 pipe for the 2-1/2 inch valve. • 8.7 feet of 3 inch Sch. 40 pipe for the 3 inch valve. • 4.5 feet of 4 inch Sch. 40 pipe for the 4 inch valve. • 6.6 feet of 5 inch Sch. 40 pipe for the 5 inch valve. • 11.1 feet of 6 inch Sch. 40 pipe for the 6 inch valve. • 10.2 feet of 8 inch Sch. 30 pipe for the 8 inch valve. • 12.1 feet of 10 inch Sch. 30 pipe for the 10 inch valve. Model BFV-N Butterfly Valve Grooved End 2-1/2 Inch - 10 Inch (DN65 - DN250) Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 Page of 4 MAY, 2008 TFP50 Valve Nominal Sizes A B C D E Nominal Installation Dimensions in Inches and (mm)Weight (kg)lbs.F G Pipe O.D.H F DN100 4" DN150 6" DN80 3" (116,0)4.56 (98,0)3.85 (110,0)4.35 (90,0)3.54 (12,7)28 (10,4)23 DN65 2-1/2"(98,0)3.85 (83,0)3.25 (10,0)22 DN125 5"(149,0)5.86 (123,0)4.84 (14,1)31 DN200 8"(134,0)5.26 (174,0)6.87 (24,1)53 DN250 10"(160,0)6.29 (233,0)9.17 (40,0)88 FLAGINDICATORHANDWHEEL DISC OPERATOR GEAR BODY CONDUIT 1/2"NPT CONNECTION E D C B G A H (149,0)5.86 (151,0)5.93 (18,6)41 (114,3)4.50 (168,3)6.63 (88,9)3.50 (73,0)2.88 (141,3)5.56 (219,1)8.63 (273,1)10.75 0 0 0 0 (17,0)0.67 12.25 17.31 (487,7) 25.11(637,8) (439,7) 19.20 (354,3) 14.93(379,2) (311,1) 13.95 11.71(297,4) 7.07(179,6)6.00(152,4)7.81(198,4) 11.50(292,1) (236,0) (212,0) 9.29 8.35 9.00(228,6) 6.00 (152,4) (152,4) 6.00 7.68(195,1) 7.81 (198,4) (198,4) 7.81 3.00(76,2)7.41(188,2) (148,8)5.86 (137,9) (167,1) (144,2) 6.58 5.68 5.43 (152,4) 6.00 (152,4)6.00 (152,4) 6.00 (198,4) 7.81 (198,4)7.81 (198,4) 7.81 (63,5)2.50 (63,5)2.50 (63,5)2.50 (63,5)2.50 (63,5)2.50 (63,5)2.50 FIGuRe 1 model bFv-N GRooved eNd butteRFly vAlve – NomINAl dImeNSIoNS – Page 2 of 4 TFP50 FIGuRe 2 model bFv-N butteRFly vAlve – INteRNAl SWItch WIRING dIAGRAm – Installation The Model BFV-N Grooved End But-terfly Valves may be installed with flow in either direction and can be posi-tioned either horizontally or vertically. The grooved end pipe couplings used with the Model BFV-N must be listed or approved for fire protection service and installed in accordance with the manufacturers instructions. The Model BFV-N Butterfly Valve may be installed with any schedule of pres-sure class of pipe or tubing that is list-ed or approved for fire protection. As applicable, refer to Figure 2 for the internal switch wiring diagram. Conduit and electrical connections are to be made in accordance with the authority having jurisdiction and/or the National Electrical Code. With reference to Figure 2, the “supervi-sory switch” is intended for connec-tion to the supervisory circuit of a fire alarm control panel in accordance with NFPA 72. The “auxiliary switch” is in-tended for the unsupervised connec-tion to auxiliary equipment in accor-dance with NFPA 70, National Electric Code. NoteFor outdoor applications with inter-nal supervisory switches, it is recom-mended that wiring connections be made at a temperature above 15°F (-9°C), in order to insure sufficient flex-ibility of the wire lead insulation. Care and Maintenance The owner is responsible for the in-spection, testing, and maintenance of their fire protection system and devic-es in accordance with the applicable standards of the National Fire Pro-tection Association (e.g., NFPA25), in addition to the standards of any au-thority having jurisdiction. The install-ing contractor or product manufac-turer should be contacted relative to any questions. Any impairment must be immediately corrected. It is recommended that automatic sprinkler systems be inspected, test-ed, and maintained by a qualified in-spection service. 1/2A@ 125 VDCCONTACTRATING 1/4A@ 250 VDC .... 15.1A/12HP @ 125,250VAC 5A@ 125 VAC "L" END OFLINE RESISTOR PANELORANGEORANGEYELLOWYELLOWSUPERVISORY SWITCH SWITCH SHOWN WITH VALVEFULLOPEN GREENVIOLETAUXILIARY SWITCH SHOWN WITH VALVE FULL OPEN BLUEREDBELL SWITCHGND POWER NOTUSED+ -- + NoteBefore closing a fire protection system control valve for maintenance or in-spection work on either the valve or fire protection system which it controls, permission to shut down the affected fire protection systems must be ob-tained from the proper authorities and all personnel who may be affected by this decision must be notified. TFP50 Page of 4 Limited Warranty Products manufactured by Tyco Fire & Building Products (TFBP) are war-ranted solely to the original Buyer for ten (10) years against defects in mate-rial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFBP. No warran-ty is given for products or components manufactured by companies not af-filiated by ownership with TFBP or for products and components which have been subject to misuse, improper in-stallation, corrosion, or which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protec-tion Association, and/or the standards of any other Authorities Having Juris-diction. Materials found by TFBP to be defective shall be either repaired or re-placed, at TFBP’s sole option. TFBP neither assumes, nor authorizes any person to assume for it, any other ob-ligation in connection with the sale of products or parts of products. TFBP shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer’s representatives. In no event shall TFBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential dam-ages, including but not limited to labor charges, regardless of whether TFBP was informed about the possibility of such damages, and in no event shall TFBP’s liability exceed an amount equal to the sales price. The foregoing warranty is made in lieu of any and all other warranties, ex-press or implied, including warranties of merchantability and fitness for a par-ticular purpose. This limited warranty sets forth the ex-clusive remedy for claims based on failure of or defect in products, materi-als or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full ex-tent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Procedure Grooved End Butterfly Valves:Specify: (specify inch size) Model BFV-N Grooved End Butterfly Valve with internal supervisory switches, P/N (specify). Valve Size Valve Part Number 2-1/2 . . . . . . . . . . . . . . . . . . . . . .59-300-F-025N 3. . . . . . . . . . . . . . . . . . . . . . . . . . 59-300-F-030N 4. . . . . . . . . . . . . . . . . . . . . . . . . . 59-300-F-040N 5. . . . . . . . . . . . . . . . . . . . . . . . . . 59-300-F-050N 6. . . . . . . . . . . . . . . . . . . . . . . . . . 59-300-F-060N8. . . . . . . . . . . . . . . . . . . . . . . . . . 59-300-F-080N 10 . . . . . . . . . . . . . . . . . . . . . . . . .59-300-F-100N Page 4 of 4 TFP50 ©2008 TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 Tyco Fire Products Model CV-1F Check Valve Page of 4 JULY, 2008 TFP550 Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500 General Description The Tyco® Model CV-1F Check Valve is a compact and rugged swing-type unit that allows water flow in one direction and prevents flow in the opposite di-rection. A resilient elastomer seal fac-ing on the spring loaded clapper en-sures a leak tight seal and non-sticking operation. The Model CV-1F Check Valves are designed to minimize water hammer caused by flow reversal. The CV-1F is furnished with grooved ends and can be installed using Grinnell® Grooved Couplings or Grin-nell Figure 71 Flange Adapters. The Model CV-1F Check Valves have been designed with a removable cover for ease of field maintenance. Valves in-stalled horizontally or inclined (flow up or down) are to be positioned with the cover facing up. Valves installed verti-cally may be positioned with flow up or down. A Maintenance Check Valve Kit (TFP1555) is available to allow the maintenance procedure of backflush-ing through the fire department con-nection without removing the Model CV-1F Check Valve from the pipe line. The Model CV-1F Check Valves are a redesignation for the Central Figure 590F and Grinnell Figure 590F. notice The Model CV-1F Check Valve de-scribed herein must be installed and maintained in compliance with this document and with the applicable standards of the National Fire Pro-tection Association, in addition to the standards of any authorities having ju-risdiction. Failure to do so may impair the performance of this device. The owner is responsible for maintain-ing their fire protection system and de-vices in proper operating condition. The installing contractor or manufac-turer should be contacted with any questions. Technical Data Sizes- Inches / DN 2 to 12 / DN50 to DN300 Maximum Working Pressure 300 psi (20,7 bar) Approvals UL, FM, and C-UL. Protective Coating Valve assembly • Non-lead paint Installation The Model CV-1F Check Valves are to be installed in accordance with the fol-lowing instructions: Step 1. The arrow cast on the Body must point in the direction of the flow. Step 2. Valves installed vertically may be positioned with the flow up or down. Step 3. Valves installed horizontally or inclined (flow up or down) are to be positioned with the Cover facing up. Step 4. Grooved end pipe couplings used with the CV-1F must be installed in accordance with manufacturer’s instructions. Care and Maintenance The owner is responsible for the in-spection, testing, and maintenance of their fire protection system and devic-es in compliance with this document, as well as with the applicable stan-dards of the National Fire Protection Association (e.g., NFPA 25), in addition to the standards of any authority hav-ing jurisdiction. The installing contrac-tor or product manufacturer should be contacted relative to any questions. Any impairments must be immediately corrected. Automatic sprinkler systems should be inspected, tested, and maintained by a qualified Inspection Service in accor-dance with local requirements and/or national codes. After placing a fire protection system in service, notify the proper authorities and advise those responsible for mon-itoring proprietary and/or central sta-tion alarms. Page 2 of 4 TFP550 Nominal Pipe Size Nominal Dimensions- Inches (mm)CoverBolt Torq.Lbs.-ft. (Nm) Approx. WeightLbs. (kg) ANSI Inches DN O.D. Inches (mm)A B C D E F J 2 DN50 2.375 (60,3)6.75(171,5)4.38(111,3)2.55(64,8)2.57(65,3)3.25(82,3)4.75(120,7)1.62(41,5)18(25)9.0(4,5) 2½ DN65 2.875 (73,0)8.00(203,2)5.80(147,3)3.41(86,6)3.40(86,4)3.88(98,6)6.00(152,4)1.70(43,2)39(54)10.0(4,5) – DN65 – (76,1)8.00(203,2)5.80(147,3)3.41(86,6)3.40(86,4)3.88(98,6)6.00(152,4)1.70(43,2)39(54)10.00(4,5) 3 DN80 3.500 (88,9)8.37(212,6)5.76(146,3)3.60(91,4)3.40(86,4)3.88(98,6)6.00(152,4)1.70(43,2)39(54)11.0(5,0) 4 DN100 4.500 (114,3)9.63(244,6)6.74(171,2)4.61(117,1)3.63(92,2)4.56(115,1)7.13(181,1)1.84(46,7)50(69)25.0(11.3) – DN125 – (139,7)10.50(266,7)7.50(190,5)5.29(134,4)4.20(106,7)4.90(124,5)7.60(193,0)1.90(48,3)39(54)29.0(13.2) 5 DN125 5.563 (141,3)10.50(266,7)7.50(190,5)5.29(134,4)4.20(106,7)4.90(124,5)7.60(193,0)1.90(48,3)39(54)29.0(13,2) – DN150 – (165,1)11.50(292,1)8.05(204,5)5.75(146,1)4.50(114,3)5.00(127,0)7.60(193,0)1.48(37,6)60(82)47.0(21,3) 6 DN150 6.625 (168,3)11.50(292,1)8.05(204,5)5.75(146,1)4.50(114,3)5.00(127,0)7.60(193,0)1.48(37,6)60(82)47.0(21,3) 8 DN200 8.625 (219,1)14.00(355,6)10.25(260,4)7.75(196,9)5.62(142,7)5.45(138,4)8.40(213,4)2.20(58,9)120(164)66.0(29,9) 10 DN250 10.750 (273,1)18.00(457,2)13.00(330,2)10.21(259,3)6.38(162.1)7.50(190.5)10.50(266,7)3.00(76,2)130(178)109.7(49,4) 12 DN300 12.750 (323,9)21.00(533,4)14.28(362,7)11.31(287,2)7.26(184,4)7.62(193,5)10.62(269,7)2.75(69.9)130(178)151.0(68,0) figure 2 nominal dimensions model cV-1f check ValVes NPT 1/2" NPT 1/2" B A C D O.D. J E F TFP550 Page of 4 figure 2 model cV-1f check ValVes 0,04 0,05 0,07 0,06 0,09 0,08 0,10 0,20 0,30 INPOUNDSPERSQUAREINCH(PSI)NOMINALPRESSUREDROPNOMINALPRESSUREDROPINBAR(1PSI=0,06895BAR)0.5 0.6 1.00.9 0.8 0.7 4.0 2.0 3.0 5.0 200 300 400 600 1000 2000 3000 4000 6000 10000 700 1000 2000 3000 5000 7000 10000 20000 30000 15000 50000 100 500 FLOW RATE IN LITRES PER MINUTE (LPM) (1 GPM =3,785 LPM) FLOW RATE IN GALLONS PER MINUTE (GPM)2-1/2INCH(DN65)3INCH(DN80)5INCH(DN125)8INCH(DN200)6INCH(DN150)4INCH(DN100)10INCH(DN250)2INCH(DN50)12INCH(DN300)15 VIEW A DETAIL B SEE DETAIL B 2"-8"(DN50-DN200)10"-12"1 VIEW A SEE 2"-8"(DN50-DN200)10"-12" (DN250 -DN300) 1718 2 9 8 7 5 (DN250 -DN300) 8 9 2 7 5 13 14,16 6 13 11,16 19 5 6 5 11 12 3 2 4,16 Detail Part Material Qty.Detail Part Material Qty.Detail Part Material Qty. 1 Body Ductile Iron 1 6 Clapper Facing EPDM Grade “E”1 13 Retaining Disc Stainless Steel 1 2 Cover Ductile Iron 1 7 Spring Stainless Steel 1 14 Locknut Stainless Steel 1 3 Cover Gasket Nitrile Rubber 1 8 Hinge Shaft Stainless Steel 1 15 Plug-1⁄2”- 14 NPT Cast Iron 2 4 Hex Cap Screw Steel, Zinc Plated AR 9 Retaining Ring Stainless Steel AR 16 Adhesive Thread Sealer AR 5 Clapper 2” - 8”Stainless Steel 1 11 Retention Bolt Stainless Steel 1 17 Nameplate Aluminum 1 Clapper 10” - 12”Ductile Iron 12 Seal Ring Neoprene 1 18 Rivet Steel 2 figure 3 model cV-1f pressure loss data Page 4 of 4 TFP550 © 2008 TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446 Limited Warranty Products manufactured by Tyco Fire & Building Products (TFBP) are war-ranted solely to the original Buyer for ten (10) years against defects in mate-rial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFBP. No warran-ty is given for products or components manufactured by companies not af-filiated by ownership with TFBP or for products and components which have been subject to misuse, improper in-stallation, corrosion, or which have not been installed, maintained, modified or repaired in accordance with applicable Standards of the National Fire Protec-tion Association, and/or the standards of any other Authorities Having Juris-diction. Materials found by TFBP to be defective shall be either repaired or re-placed, at TFBP’s sole option. TFBP neither assumes, nor authorizes any person to assume for it, any other ob-ligation in connection with the sale of products or parts of products. TFBP shall not be responsible for sprinkler system design errors or inaccurate or incomplete information supplied by Buyer or Buyer’s representatives. In no event shall TFBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential dam-ages, including but not limited to labor charges, regardless of whether TFBP was informed about the possibility of such damages, and in no event shall TFBP’s liability exceed an amount equal to the sales price. The foregoing warranty is made in lieu of any and all other warranties, ex-press or implied, including warranties of merchantability and fitness for a particular purpose. This limited warranty sets forth the ex-clusive remedy for claims based on failure of or defect in products, materi-als or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full ex-tent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Procedure The Model CV-1F Check Valves:Specify: (specify size) Model CV-1F Check Valve, P/N (specify) 2” (DN50) Valves . . . . . . . . . . . . . .59-590-0-0202-1/2” (DN65) Valves . . . . . . . . . . .59-590-0-025 DN65 (76,1mm) Valves . . . . . . . . . .59-590-0-076 3” (DN80) Valves . . . . . . . . . . . . . .59-590-0-0304” (DN100) Valves . . . . . . . . . . . . . .59-590-0-040 DN125 (139,7) Valves . . . . . . . . . . .59-590-0-1395” (DN125) Valves . . . . . . . . . . . . . .59-590-0-050 DN150 (165,1) Valves . . . . . . . . . . .59-590-0-165 6” (DN150) Valves . . . . . . . . . . . . . .59-590-0-0608” (DN200) Valves . . . . . . . . . . . . .59-590-0-080 10” (DN250) Valves. . . . . . . . . . . . .59-590-0-10012” (DN300) Valves . . . . . . . . . . . .59-590-0-120 Replacement Valve PartsSpecify: (specify description) for use with (specify size) Model CV-1F Check Valve, P/N (specify) 2” (DN50) Valves Cover Gasket . . . . . . . . . . . . . . . . . . .976-705-01 Clapper Facing . . . . . . . . . . . . . . . . . .976-709-01 2-1/2” (DN65) ValvesCover Gasket . . . . . . . . . . . . . . . . . . .975-618-01 Clapper Facing . . . . . . . . . . . . . . . . . .975-621-01 3” (DN80) Valves Cover Gasket . . . . . . . . . . . . . . . . . . .975-618-01 Clapper Facing . . . . . . . . . . . . . . . . . .975-491-01 4” (DN100) Valves Cover Gasket . . . . . . . . . . . . . . . . . . .975-120-01Clapper Facing . . . . . . . . . . . . . . . . . .975-003-01 5” (DN125) ValvesCover Gasket . . . . . . . . . . . . . . . . . . .975-120-01 Clapper Facing . . . . . . . . . . . . . . . . . .975-219-01 6” (DN150) Valves Cover Gasket . . . . . . . . . . . . . . . . . . .975-218-01 Clapper Facing . . . . . . . . . . . . . . . . . .975-006-01 8” (DN200) Valves Cover Gasket . . . . . . . . . . . . . . . . . . .975-479-01Clapper Facing . . . . . . . . . . . . . . . . . .975-463-01 10” (DN250) ValvesCover Gasket . . . . . . . . . . . . . . . . . . .976-000-01 Clapper Facing . . . . . . . . . . . . . . . . . .975-977-01 12” (DN300) Valves Cover Gasket . . . . . . . . . . . . . . . . . . .976-472-01 Clapper Facing . . . . . . . . . . . . . . . . . .976-474-01 General Description The Figure 513 (13) Riser Manifolds described in this technical data sheet provide the necessary waterflow alarm, pressure gauge, alarm test ori- fice, drain, and sight glass equipment in a single assembly for use in NFPA 13 sprinkler systems as follows: NFPA 13* •1-1/2 Inch (DN40) Male Thread x Female Thread •1-1/2thru6Inch(DN40thruDN150) Groove x Groove *Although the Riser Manifold described in this data sheet is intended for NFPA 13 sprinkler systems, it may be used for NFPA 13D or 13R residential sprinkler systems, where a test orifice of 5.6K (80K) is accept- able. The variety of sizes and grooved end connections allow cost effective and easy transition tocheck valves,control valves, and system piping. The Riser Manifoldsmaybeinstalledineitherthe horizontal (flow switch on top) or verti- cal (flow going up) for both single sprinkler rises and floor control in high rises. WARNING The Riser Manifolds described herein must be installed and maintained in compliance with this document, as well as with the applicable standards of the National Fire Protection Asso- ciation, in addition to the standards of any other authorities having jurisdic- tion.Failure to do so may impair the performance of these devices. The owner is responsible for maintain- ing their fire protection system and de- vices in proper operating condition. The installing contractor or sprinkler manufacturer should be contacted with any questions. Technical Data Approvals The Figure 513 (13) Riser Manifolds with a cover tamper switch for the wa- terflow alarm switch are UL Listed, ULC Listed, and FM Approved. The Figure 513 (13) Riser Manifolds without a cover tamper switch for the waterflow alarm switch are UL Listed and FM Approved. Maximum Working Pressure 175 psi (12,1 bar) Test Orifice 5.6K (80K) Assembly The manifold body of the Figure 513 is ductile iron, whereas the manifold body of the Figure 13 is cast iron. The two assemblies are completely inter- changeable in function, application, and end-to-end laying length. Finish Red painted. Installation The Riser Manifolds may be installed in either the horizontal (flow switch on top) or vertical (flow going up). The inlet of the Riser Manifold may be di- rectly connected to a shut-off control valve. NOTES Where applicable pipe thread sealant is to be applied sparingly. Use of a non-hardening pipe thread sealant is recommended. Never remove any piping component nor correct or modify any piping defi- ciencies without first depressurizing and draining the system. Step 1.Install the manifold body with the flow arrow pointing in the down- stream position using threaded con- nections and/or listed mechanical grooved connections, as applicable Step 2.Connect the drain line, and then close the drain valve. Step 3.Refer to Figure 3 for wiring guidance. All wiring must be per- formed in accordance with the Author- ity Having Jurisdiction and/or the Na- tional Electrical Code. Step 4.Refer to Figure 4 for optional relief valve. Step 5.Place the system in service by filling the system with water. When fill- ing the system, partially open the con- trol valve to slowly fill the system.Fill- ing the system slowly will help avoid damaging the waterflow alarm switch. After the system is fully pressurized, completely open the control valve. Step 6.Secure all supply valves open. Model 513 (13) Riser Manifold 1-1/2 thru 6 Inch (DN40 thru DN150) For NFPA 13 Sprinkler Systems Page 1 of 6 TFP962APRIL, 2006 Technical Services:Tel: (800) 381-9312 / Fax: (800) 791-5500 Page2of6 TFP962 FIGURE 1 1-1/2 INCH (DN40) RISER MANIFOLD ASSEMBLY AND DIMENSIONS to the Waterflow Alarm Switches. 6-1/8" (155,6 mm) 12-5/8" (320,7 mm) (131,8 mm) Male x Male NPT 1. Approximate weight, 11.2 lbs. (5,1 kg). Cover Tamper Switches installed internal ULC Listed Manifolds are equipped with2. NOTES: 3/4" (19,1 mm) 1"5-3/16" NPT 1 Male x Female NPT, Manifolds Groove x Groove 10" (254,0 mm) Manifolds 14-1/4" 11-1/8" (282,6 mm) (362,0 mm) 2Waterflow3 3. CH: Common Hardware 3-1/2" (88,9 mm) QTY. UL/FM Waterflow Alarm Switch: VSR-SF with Paddle, VSR-SF with Paddle and Cover Tamper Switch, ULC/FM DESCRIPTION 1-1/2" Manifold Body, Groove x Groove Male x Female NPT 2 NO. 1 ............... .............. 1..... ....... 1 1 1 N/A 976-519-02 971-096-00 N/A P/N Water Pressure Gauge 300 psi/2000 kPa3 . . 1 2341 Closed) (Normally Drain Valve Inspector's Test & Drain Valve (Normally set to "Drain") TFP962 Page3of6 FIGURE 2 2 thru 6 INCH (DN50 thru DN150) RISER MANIFOLD ASSEMBLY AND DIMENSIONS 9/16 1 (14,3) C Nominal Installation Dimensions in Inches and (mm) 1 4-5/16 (25,4) 4-5/16 (109,5) (109,5) (25,4) 133 Inch 17-3/16 Cover Tamper Switches installed internal to the Waterflow Alarm Switches. ULC Listed Manifolds are equipped with NOTES: CH: Common Hardware2. 1. H C E D 4 Inch (DN80) 6 Inch (DN150) (DN100) A B Drain Valve (Normally Closed) 20-1/2 (436,6) 20-1/2 (520,7) (520,7) (330,2) (330,2) (330,2) 13 13 QTY. 2 INCH (DN50) MANIFOLD DESCRIPTION ULC/FM UL/FM Waterflow Alarm Switch: VSC with Paddle, VSC with Paddle and Cover Tamper Switch, 2" Manifold Body, Groove x Groove 300 psi/2000 kPa Water Pressure Gauge 3 2 NO. 1 1............... .............. ..1 1 .......1 Manifold 2 Inch 2-1/2 Inch (DN50) (DN65) 976-357-01 976-520-01 2341 Size N/A P/N 16-3/4 17-3/16 (425,5) (436,6) A (330,2) (330,2) 13 13 B 3-1/2 18.77-1/86 14-1/4 1-1/4" NPT to "Drain") (Normally set & Drain Valve F Test (422,3) 16-5/8 (469,9) 18-1/2 (362,0)Waterflow1 7-9/16 (152,4) (215,9) (192,1) 8-1/2 3 9-1/16 (181,0) 10 (254,0) (230,2) 2 4-1/2 (88,9) 6-5/8 (168,3) (114,3) 2" NPT 2" NPT G 32.7 (8,5) (18,9) 41.6 (14,8) Drain Size 1-1/4" NPT13-3/4 (331,8) 13-1/16 (349,3) (136,5) (146,1) 5-3/8 5-3/4 D 6-3/8 6-7/8 (161,9) (174,6) E 3-1/2 3-1/2 (88,9) (88,9) FG 1" NPT H Weight (6,1) 13.5 16.8 lbs. (kg) (7,6) 2 Waterflow Alarm Switch: 976-520-05 2341 976-357-05 VSC with Paddle, VSC with Paddle and Cover Tamper Switch, ULC/FM UL/FM Water Pressure Gauge 300 psi/2000 kPa3 1.. .............. ............... 1 1 P/N N/A 2341 976-520-04 976-357-04 N/A P/N 1...............UL/FM 300 psi/2000 kPa Water Pressure Gauge Cover Tamper Switch, VSC with Paddle and ULC/FM Groove x Groove 6" Manifold Body, DESCRIPTIONNO. 1 3 ....... 6 INCH (DN150) MANIFOLD QTY. 1 .............. 1.. 1 Groove x Groove 4" Manifold Body, DESCRIPTION Waterflow Alarm Switch: VSC with Paddle, 2 NO. 1 .......1 QTY. 4 INCH (DN100) MANIFOLD 1..............ULC/FM 976-520-02 2341Water Pressure Gauge 300 psi/2000 kPa3 ..1 976-357-02............... Groove x Groove 2-1/2" Manifold Body, Cover Tamper Switch, VSC with Paddle and VSC with Paddle, Waterflow Alarm Switch: DESCRIPTION 2-1/2 INCH (DN65) MANIFOLD 1 UL/FM 2 NO. ....... 1 N/A1 P/NQTY. 1..............ULC/FM 976-520-03 300 psi/2000 kPa Water Pressure Gauge 3 1. . 2341 ............... 3" Manifold Body, Groove x Groove Waterflow Alarm Switch: VSC with Paddle, VSC with Paddle and Cover Tamper Switch, DESCRIPTION 3 INCH (DN80) MANIFOLD 1 2 UL/FM NO. 1 .......1 976-357-03 N/A QTY. P/N Page4of6 TFP962 FIGURE 3 WIRING GUIDANCE INCOMING OUTGOING SINGLE CONDUCTOR TERMINAL PLATE LOOPED SECTION UNINSULATED CLAMPING CONDUCTORS SEPARATE STRIPPED ENDS SWITCH TERMINAL CONNECTIONS CLAMPING TERMINAL PLATE IMPROPER CONNECTION METHOD PROPER CONNECTION METHOD SEVERED CAUTION: An uninsulated section of a single conductor is not permitted to be looped around the terminal and serve as two separate connections. The wire must be severed to serve as two separate connections, thereby providing supervision of the connection in the event that the wire becomes dislodged from the terminal. WATERFLOW SWITCH TYPICAL ELECTRICA CONNECTIONS COM NCNO NO FLOW CONTACTS SPDT (Form C) 5A @ 125 VACCONTACT RATING 2.5A @ 30 VDC .......... .... COM NO NC POWER SIGNAL LOCAL DEVICE NON-SUPERVISED CIRCUITCONDITION END OF LINE RESISTOR COM SUPERVISED CIRCUIT STYLE B/CLASS B CONTROL NO NC PANEL signaling unit, while the other contact is used to operate a local audible or visual annunciator. Switch has two switches, one can be used to operate a central station, proprietary or remove For supervised circuits, see "Switch Terminal Connections" above. The Waterflow Alarm NOTE: (SEE NOTE) COVER TAMPER SWITCH (ULC ASSEMBLIES ONLY) CONTACTS SHOWN WITH COVER IN PLACE COM .......... ....CONTACT RATING NO CONTACTS 3A @ 250 VAC 5A @ 125 VAC NC SPDT (Form C) 1mA @ 5 VDC min. Care and Maintenance The following inspection procedure must be performed as indicated, in ad- dition to any specific requirements of the NFPA, and any impairment must be immediately corrected. The owner is responsible for the in- spection, testing, and maintenance of their fire protection system and de- vices in compliance with this docu- ment, as well as with the applicable standards of the National Fire Protec- tion Association (e.g., NFPA 25), in addition to the standards of any authority having jurisdiction. The in- stallingcontractor orproductmanufac- turer should be contacted relative to any questions. It is recommended that automatic sprinkler systems be inspected, tested, and maintained by a qualified Inspection Service in accordance with local requirements and/or national codes. NOTES Noattemptistobemadetorepairany Riser Manifold component in the field. Only the pressure gauge, waterflow alarm switch, or relief valve can be replaced. If any other problems are encountered the entire riser manifold must be replaced. The alarm/flow test procedure will re- sult in operation of the associated alarms. Consequently, notification must be given to the owner and the fire department, central station, or other signal station to which the alarms are connected, and notification must be given to the building occupants. Before closing a fire protection system control valve for inspection or mainte- nance work on the fire protection sys- tem that it controls, permission to shut down the effected fire protection sys- tem must first be obtained from the proper authorities and all personnel who may be affected by this action must be notified. After placing a fire protection system in service, notify the proper authorities and advise thoseresponsibleformoni- toring proprietary and/or central sta- tion alarms. Alarm/Flow Test Procedure Step 1.Place the test & drain Valve in the “test” position. Step 2.Fully open the drain valve. Make certain that drainage water will not cause any damage or injury. Step 3.Verify operation of associated alarms. Step 4.Close the drain valve. Step 5.Place the test & drain Valve in the “drain” position. Step 6.Verify that the residual (flow- ing) pressure indicated by the pres- sure gauge is no less that originally recorded for the system when it was first installed. Step 7.Close the drain valve. Step 8.Verify that the static (not flow- ing) pressure indicated by the pres- sure gauge is no less that originally recorded for the system when it was first installed. TFP962 Page5of6 FIGURE 4 OPTIONAL PRESSURE RELIEF VALVE 1 system outlet piping, and a connection back 3/8" Copper Tubing, 2" (DN50) Manifolds 6" (DN150) Manifolds 4" (DN100) and 3" (DN80) Manifolds To install optional Pressure Relief Trim on must be provided by the installer on the a 1-1/2" (DN40) Manifold, a 1/2" NPT outlet 2-1/2" (DN65) and 1 1 1 .... ... .... 971-124-02 971-124-01 971-124-03 Pressure Relief Valve, DESCRIPTION 175 psi, Nonadjustable NO. 2 QTY. 1. . 198-066-00 P/N CH: Common Hardware with installer supplied 3/8" copper tubing. to the manifold drain trim must be fabricated 3 2 134 2 3 1-1/2" (DN40) Manifold Discard unused trim components. Fabricated 3/8" Copper Tubing Installer 1/2" NPT Outlet 90° Compression Fitting .............. 1" x 1/2" Reducing Hex4 Bushing 1 CH DESCRIPTIONNO. 3 QTY. P/N CH2................Fitting Manifold Drain Trim 3 Provided System Outlet Installer Piping 1-1/2" (DN40) Manifold Only: 2" (DN50), 2-1/2" (DN65), 6" (DN150) Manifold 3" (DN80), 4" (DN100), or Limited Warranty Products manufactured by Tyco Fire & Building Products (TFBP) are war- ranted solely to the original Buyer for ten (10) years against defects in mate- rial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFBP. No warranty is given for products or com- ponents manufactured by companies not affiliated by ownership with TFBP or for products and components which havebeensubjecttomisuse,improper installation,corrosion, or which have not been installed, maintained, modi- fied or repaired in accordance with ap- plicable Standards of the National Fire Protection Association, and/or the standards of any other Authorities Having Jurisdiction. Materials found by TFBP to be defective shall be either repaired or replaced, at TFBP’s sole option. TFBP neither assumes, nor authorizes any person to assume forit, any other obligation in connection with the sale of products or parts of prod- ucts. TFBP shall not be responsible for sprinkler system design errors or inac- curate or incomplete information sup- plied by Buyer or Buyer’s repre- sentatives. In no event shall TFBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect,specialorconsequentialdam- ages, including but not limited to labor charges, regardless of whether TFBP was informed about the possibility of such damages, and in no event shall TFBP’s liability exceed an amount equal to the sales price. Theforegoingwarrantyismadeinlieu of any and all other warranties, ex- press or implied, including warranties ofmerchantabilityandfitnessforapar- ticular purpose. This limited warranty sets forth the ex- clusive remedy for claims based on failure of or defect in products, materi- als or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full ex- tent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Information Riser Manifold: Specify; Size (specify), Figure 513, (specify connection type inlet x outlet) Riser Manifold (specify - without or with) a cover tamper switch for the waterflow alarm switch, P/N (specify). NOTES Orders for Figure 513 may be filled with a Figure 13. The two assemblies are completely interchangeable in function, application, and end-to-end laying length. If a ULC Listing is required, the Riser Manifold must be ordered with a cover tamper switch for the waterflow alarm switch. UL/ULC/FM Assemblies With Cover Tamper Switch 1-1/2 Inch (DN40) MT x FT . . . . . . . . . . . . . . P/N 4086 1-1/2 Inch (DN40) MT x MT . . . . . . . . . . . . . . P/N 4087 2 Inch (DN50) G x G . . . . . . . . . . . . . . . . P/N 4090 2-1/2 Inch (DN65) G x G . . . . . . . . . . . . . . . . P/N 4091 3 Inch (DN80) G x G . . . . . . . . . . . . . . . . P/N 4092 4 Inch (DN100) G x G . . . . . . . . . . . . . . . . P/N 4095 6 Inch (DN150) G x G . . . . . . . . . . . . . . . . P/N 4096 UL/FM Assemblies Without Cover Tamper Switch 1-1/2 Inch (DN40) MT x FT . . . . . . . . . . . . . . P/N 4055 1-1/2 Inch (DN40) MT x MT . . . . . . . . . . . . . . P/N 4056 2 Inch (DN50) G x G . . . . . . . . . . . . . . . . P/N 4060 2-1/2 Inch (DN65) G x G . . . . . . . . . . . . . . . . P/N 4061 3 Inch (DN80) G x G . . . . . . . . . . . . . . . . P/N 4062 4 Inch (DN100) G x G . . . . . . . . . . . . . . . . P/N 4065 6 Inch (DN150) G x G . . . . . . . . . . . . . . . . P/N 4066 Optional Pressure Relief Valve: Specify: Operational Pressure Relief Valve and Trim for use with (specify size) Figure 513 or 13 Series Riser Manifold, P/N (specify). 1-1/2" or 2". . . . . . . . . . . . . . . P/N 4063 2-1/2" or 3". . . . . . . . . . . . . . . P/N 4072 4" or 6" . . . . . . . . . . . . . . . . . . P/N 4073 Replacement Parts: Specify: (description) for use with Fig- ure 513 or 13 Riser Manifold,P/N (Ref. Figure 1 or 2, as applicable). Page6of6 TFP962 TYCO FIRE & BUILDING PRODUCTS,451 North Cannon Avenue, Lansdale, Pennsylvania 19446 a company ® ® DOCUMENT #: REVISION:BF-350A 8/10(Patent No. 5,913,331) Page 1 of 2 Model 350A Double Check Valve Assembly SPECIFICATION SUBMITTAL SHEET E F D CB A G B A E F DC APPLICATIONDesigned for installation on potable water lines to protect against both backsiphonage and backpressure of polluted water into the potable water supply. The Model 350A shall provide protection where a potential health hazard does not exist. Ideal for use where lead-free* valves are required. STANDARDS COMPLIANCE (Horizontal & Vertical)  ASSE® Listed 1015  AWWA Compliant C510 (with gates only)  IAPMO® Listed  CSA® Certified  UL® Classified  C-UL® Classified  FM® Approved  NYC MEA 220-04-M Vol 2 (2 1/2" - 8")  Approved by the Foundation for Cross Connection Control and Hydraulic Research at the University of Southern California  NSF® Listed-Standard 61, Annex G* *(0.25% MAX. WEIGHTED AVERAGE LEAD CONTENT) MATERIALS Main valve body Ductile Iron ASTM A 536 Grade 4 Access covers Ductile Iron ASTM A 536 Grade 4 Coatings FDA Approved electrostatic epoxy finish Internals Stainless steel, 300 Series NORYL™, NSF Listed Fasteners & springs Stainless Steel, 300 Series Seal ring EPDM (FDA approved) O-ring Buna Nitrile (FDA approved) FEATURES Sizes: 2 1/2" 3" 4" 6" 8" 10" Maximum working water pressure 175 PSI Maximum working water temperature 140˚F Hydrostatic test pressure 350 PSIEnd connections (Grooved for steel pipe) AWWA C606 (Flanged) ANSI B16.1 Class 125 OPTIONS (Suffixes can be combined)  - with flanged end NRS gate valves (standard)  FSC - with epoxy coated wye type strainer (flanged only)  G - with grooved end NRS gate valves  GF - with grooved inlet gate connection and flanged outlet gate connection  FG - with flanged inlet gate connection and grooved outlet gate connection  L - less shut-off valves (grooved body connections)  OSY - with flanged end OS&Y gate valves OSYG - with grooved end OS&Y gate valves  PI - with Post Indicator Gate Valves (3"-12") BGVIC - with grooved end butterfly valves ACCESSORIES Repair kit (rubber only)  Thermal expansion tank (Model XT)  OS & Y Gate valve tamper switch (OSY-40) Test Cock Lock (Model TCL24)  DIMENSIONS & WEIGHTS (do not include pkg.) (with BGVIC valves)(with OSY gates) MODEL SIZE WEIGHT WITHOUTGATES WITH NRSGATES (GXF) WITH OS&Y GATES (GXF) WITH NRSGATES (GXG) WITH OS&YGATES (GXG) WITH BUTTERFLY VALVES (GXG) in.mm lbs.kg lbs.kg lbs.kg lbs.kg lbs.kg lbs.kg 2 1/2 65 90 41 184 83.5 192 87 176 80 184 83.5 108.8 49.4 3 80 89 40.5 204 92.5 210 95.3 194 88 200 90.8 109.4 50 4 100 76 34.5 220 100 230 104 194 88 204 93 108 49 6 150 126 57.2 346 157 362 164 316 143 332 151 178 81 8 200 286 130 738 335 762 335 738 335 738 335 394 179 10 250 339 153.8 966 438.2 1024 464.5 844 382.8 902 409.1 511 232 MODEL 350A with BGVIC option MODELSIZE DIMENSION (approximate) A A WITH BUTTERFLY B LESS GATE VALVES C D EOS&Y OPEN EOS&YCLOSED E NRS GATE E WITHBUTTERFLY VALVES F G in.mm in.mm in.mm in.mm in.mm in.mm in.mm in.mm in.mm in.mm in.mm in.mm 2 1/2 65 35 1/8 892 32 1/8 816 20 1/8 511 4 1/2 114 7 1/4 184 16 3/8 416 13 7/8 352 11 3/8 289 8 203 6 152 45 1/4 1150 3 80 36 1/8 918 33 838 20 1/8 511 4 1/2 114 7 1/4 184 18 7/8 479 15 5/8 397 12 3/8 314 8 203 6 152 46 7/8 1191 4 100 38 1/4 972 33 1/4 845 19 7/8 505 4 1/2 114 8 203 22 3/4 578 18 1/4 464 14 3/4 375 9 1/8 232 6 152 53 3/8 1356 6 150 47 1/4 1200 40 1/4 1022 25 7/8 657 5 1/2 140 10 254 30 1/8 765 23 3/4 603 19 483 10 1/8 257 7 178 65 3/8 1661 8 200 62 1575 55 1397 38 1/2 978 10 254 11 279 37 3/4 959 29 1/4 743 22 1/2 572 11 15/16 303 8 1/2 216 86 3/8 2194 10 250 64 5/8 1642 58 1/2 1485 38 1/2 978 10 254 12 305 45 3/4 1162 35 3/8 899 26 1/2 673 13 5/16 338 8 1/2 216 94 3/8 2398 Attention: Model 350A (grooved body) & Model 350 (flange body) have different lay lengths. MODEL 350A with OSY & FSC option Page 2 of 2 WILKINS a Zurn company, 1747 Commerce Way, Paso Robles, CA 93446 Phone:805/238-7100 Fax:805/238-5766 IN CANADA: ZURN INDUSTRIES LIMITED, 3544 Nashua Dr., Mississauga, Ontario L4V 1L2 Phone:905/405-8272 Fax:905/405-1292 Product Support Help Line: 1-877-BACKFLOW (1-877-222-5356) • Website: http://www.zurn.com MODEL 350A 2 1/2", 3" & 4" (STANDARD & METRIC) 0 5 10 15 0 200 400 600 800FLOW RATES (GPM)PRESSURE LOSS (PSIG)0 35 69 104 0.0 12.6 25.2 37.9 50.5FLOW RATES (l/s)PRESSURE LOSS (kpa)MODEL 350A 6", 8" & 10" (STANDARD & METRIC) 0 5 10 15 0 1000 2000 3000 4000 FLOW RATES (GPM)PRESSURE LOSS (PSIG)0 35 69 104 0.0 63.1 126.2 189.3 252.4 FLOW RATES (l/s)PRESSURE LOSS (kpa)TYPICAL INSTALLATION Local codes shall govern installation requirements. Unless other- wise specified, the assembly shall be mounted at a minimum of 12" (305mm) and a maximum of 30" (762mm) above adequate drains with sufficient side clearance for testing and maintenance. The installation shall be made so that no part of the unit can be submerged. SPECIFICATIONSThe Double Check Backflow Prevention Assembly shall be ASSE® Listed 1015, and supplied with full port gate valves. The main body and access cover shall be epoxy coated ductile iron (ASTM A 536 Grade 4), the seat ring and check valve shall be NORYL™, the stem shall be stainless steel (ASTM A 276) and the seat disc elastomers shall be EPDM. The checks shall be accessible for maintenance without removing the device from the line. The Double Check Backflow Prevention Assembly shall be a WILKINS Model 350A. OUTDOOR INSTALLATION MODEL 350AFS INDOOR INSTALLATION MODEL 350ABGVIC INDOOR INSTALLATION (VERT.) MODEL 350A Capacity thru Schedule 40 Pipe (GPM) Pipe size 5 ft/sec 7.5 ft/sec 10 ft/sec 15 ft/sec 2 1/2"75 112 149 224 3"115 173 230 346 4"198 298 397 595 6"450 675 900 1351 8"780 1169 1559 2339 10"1229 1843 2458 3687 12"1763 2644 3525 5288 ⃟ Rated Flow (established by approval agencies) FLOW CHARACTERISTICS 10" (250mm) 8" (200mm) 6" (150mm) 2 1/2" (65mm)3" (80mm) 4" (100mm) PROTECTIVEENCLOSURE DIRECTION OF FLOW 12" MIN. 30" MAX.DIRECTION OF FLOWDIRECTION OF FLOW 12” MIN30” MAX FIRE DEPT. INLET CONN. EXPOSED TYPE 6405-6425 SERIES Page 6-15 SINGLE CLAPPER TWO-WAY INLETS An exposed auxiliary inlet connection with 500 G.P.M. inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Dept. inlet requirements. STANDARD EQUIPMENT: Cast brass two-way inlet body only with single swing clapper and pin lug swivel back or angle outlet connection as selected by figure number. SPECIFY THREAD. "Auto Spkr."BRANDING:FINISH: Cast Brass OPTIONAL FINISHES: PB - Polished Brass RC - Rough Chrome Plated PC - Polished Chrome Plated *U/L LISTED AND FM APPROVED ___________________________________________________ Model C 6 1/2 Outlet Dimensions Style A B 6405 Back 5 1/4 8 5/64 6407 Angle 6 5/16 7 11/16 4 3/4 DOUBLE CLAPPER TWO-WAY INLETS An exposed auxiliary inlet connection with 500 G.P.M. Inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Department Inlet requirements. STANDARD EQUIPMENT: Cast brass two-way inlet body only with double drop clappers and pin lug swivels; back or angle outlet connection as selected by figure number. Branding as selected. SPECIFY THREAD AND BRANDING. BRANDING: "Standpipe", "Auto Spkr.", "Standpipe- Sprinkler" FINISH: Cast Brass OPTIONAL FINISHES: PB - Polished Brass RC - Rough Chrome Plated PC - Polished Chrome Plated *U/L LISTED AND FM APPROVED NY BSA-MEA APPROVED 6407 Angle Outlet 6420 Angle Outlet Outlet Style Dimensions Back Angle Size A B C D E *6410 4 X 2 1/2 X 2 1/2 9 5/8 12 1/4 6420 4 X 2 1/2 X 2 1/2 11 3/4 9 5/8 7 1/4 6412 6 X 2 1/2 X 2 1/2 10 1/4 11 3/4 6422 6 X 2 1/2 X 2 1/2 12 1/2 10 1/8 7 1/2 6413 4 X 3 X 3 10 12 1/2 6423 4 X 3 X 3 12 1/2 10 1/8 7 1/2 6414 5 X 3 X 3 10 1/8 12 1/2 6424 5 X 3 X 3 12 1/4 10 1/2 7 1/2 6415 6 X 3 X 3 10 3/8 12 1/2 6425 6 X 3 X 3 12 1/4 10 7/8 7 1/4 Figure No. 6410-6415 Figure No. 6420-6425 6410 Back Outlet Figure No. 6405 Figure No. 6407 6405 Back Outlet FIRE PUMP TEST CONNECTIONS 6800 SERES Page 6-23 FLUSH TYPE Provides means to test fire pump flow rate. Number of outlets contingent upon rated G.P.M. of fire pump. Each individual outlet capable of 250 G.P.M. minimum discharge and controlled by a gate valve. STANDARD EQUIPMENT::Cast brass end inlet body, size and number of outlets as selected by figure number; brass plate; with 3" Female NPT inlet and 2 1/2" Male Hose Thread outlet cast brass gate valve and cap with chain. Valves to be permanently BRANDING: " FIRE PUMP TEST" OPTIONAL FINISHES: PB - Polished Brass RC - Rough Chrome Plated PC - Polished Chrome Plated SPECIFY THREAD AND FINISH. 6806, 6807 and 6808 bodies are U/L listed.installed. *6802 unit is furnished with a steel body. Pump Pipe No. of Figure No. GPM Size Outlets B C DA *6802 500 4" 2 15 1/4 5 1/4 6 15 6806 750 6" 3 22 1/2 7 5/8 7 5/8 19.875 6807 1000 6" 4 28 3/4 7 5/8 7 5/8 30 6808 2000 8" 6 43 7 5/8 9 9/16 44 FIgure No. 6808 Figure No. 6807 Figure No. 6806 Figure No. 6802 Brass Ball Drip Valve Description The solid brass* ball drip is a “ball” type check valve. When properly installed, the internal ball rests in the lower most area of the valve body allowing for proper drainage of moisture accumulation. Upon system pressurization, the internal ball is “pushed” into the small end of the ball drip body closing the opening. When system pressure is removed, the ball returns to its original position. One of the most common uses is on the dry side of the Fire Department Connection valve. This use helps keep moisture from accumulating inside the Fire Department Connection. Designed for horizontal installation only. Installation Proper installation of the brass ball drip can be accom- plished with standard piping installation tools. Make sure the threads are clean and free from burs and debris. Apply a thread sealant suitable for the materials being joined such as PipeFit, PipeFit AS or PTFE tape. When using a paste type sealant, make sure to brush the sealant deep into the root of the threads. Thread the ball drip into female threads hand tight. Finish tightening with a pipe wrench up to one full turn. Do not over tighten. Over tightening may dam- age threads and ball drip. Finish piping to allow for proper drainage. Valve opens by force of gravity only. Do not use with more than 1 ft. column of water (water pressure) on the ball check. Use only in the horizontal position. Speciﬁ cations Type: Straight Pattern Material: Body: Brass* Ball: Brass* Standard Finishes: Rough Brass* Adjustment Range: ¼” x ½” MNPT ½” x ½” MNPT ¾” x ¾” MNPT ©2008-2009 Fire Protection Products, Inc (FPPI) Fire Protection Products, Inc 6241 Yarrow Dr., Suite A, Carlsbad, CA 92011-1541 For questions: 1 800 344-1822 • 1 800 344-3775 fax • www.fppi.com *Contains lead. Not for use in water sys- tems intended for human consumption. Project information aPProval StamP Project:❑ approved address:❑ approved as noted contractor:❑ not approved engineer:remarks: Submittal Date: notes 1: notes 2: Catalog PH-2008 Fig. 146 Continuous Threaded Rod Size Range: 1⁄4" through 1 1⁄2" Stocked in six, ten, and twelve foot lengths. Other even foot lengths can be furnished to order. Material: Carbon steel; rod threaded complete length. Finish: ❑ Plain or ❑ galvanized. Maximum Temperature: 650° F. Ordering: Specify rod diameter and length, figure number, name and finish. Note: The acceptability of galvanized coatings at temperatures above 450°F is at the discretion of the end user. Fig. 146: LOAdS (LbS) • WeighTS (LbS) diMeNSiONS (iN) rod Size a threads per inch max load Weight per ft.650˚ f 1⁄4 20 240 0.12 3⁄8 16 730 0.30 1⁄2 13 1,350 0.53 5⁄8 11 2,160 0.84 3⁄4 10 3,230 1.20 7⁄8 9 4,480 1.70 1 8 5,900 2.30 11⁄4 7 9,500 3.60 11⁄2 6 13,800 5.10 Note: Other rod sizes available upon request. Class 2 fit is available upon request. A Length hanger rods PH-11.11 PROJECT INFORMATION APPROVAL STAMP Project:q Approved Address:q Approved as noted Contractor:q Not approved Engineer:Remarks: Submittal Date: Notes 1: Notes 2: COPPER TUBING HANGERS Fig. CT-69 Adjustable Swivel Ring Size Range: 1⁄2" through 4" Material: Carbon steel Finish: Copper plated Service: Recommended for suspension of non-insulated stationary copper tube. Approvals: Complies with Federal Specification A-A-1192A (Type 10) WW-H-171-E (Type 10), ANSI/MSS SP-69 and MSS SP-58 (Type 10). Features: • Threads are countersunk so that they cannot become burred or damaged. • Knurled swivel nut provides vertical adjustment after piping is in place. • Captured swivel nut will not fall off. Ordering: Specify nominal tube size, figure number, name and finish. Note: Metric nut available upon request. Fig. CT-69: LOAdS (LbS) • WeighT (LbS) • diMeNSiONS (iN) Tube Size Max Load Weight B C F GWidth 1⁄2 300 0.10 3 23⁄16 17⁄8 5/8 3⁄4 0.10 213⁄16 2 19⁄16 1 0.10 211⁄16 113⁄16 11⁄4 11⁄4 0.10 21⁄2 15⁄8 15⁄16 11⁄2 0.10 211⁄16 113⁄16 1 2 0.11 37⁄16 21⁄2 11⁄221⁄2 525 0.25 313⁄16 215⁄16 111⁄16 3/430.27 41⁄4 33⁄8 17⁄846500.48 43⁄8 31⁄2 11/2 Note: Reflects changes in rod diameter from previously published data per recent revisions in MSS-SP-58 & 69 3⁄8" BCF CL G B CF CL F 3⁄8" G 11/2" through 4" pipe 1/2" through 11/4" pipe SAMMYS® FOR WOOD Part No.Model Rod Size Mount Direction UL Max Pipe Size UL Test Load (lbs)UL Min Wood Thickness FM Max Pipe Size FM Test Load (lbs)FM Min Wood Thickness 8007957 GST 10 3/8”Vertical CPVC 1-1/2”300 1-1/2” 8020957 SWG 10 3/8”Horizontal CPVC 1-1/2”300 1-1/2” 8008957 GST 20 3/8”Vertical 2-1/2”850 1-1/2”4”1475 1-1/2” 8068925 GST 20-SS 3/8”Vertical 2-1/2”850 1-1/2” 8010957 GST 30 3/8”Vertical 4”1500 1-1/2”4”1475 1-1/2” 8009925 GST 25-380 3/8”Vertical 4”1500 1-1/2” 8022925 SWG 25-380 3/8”Horizontal 3-1/2” - 4”*1500 1-1/2” 8021957 SWG 20 3/8”Horizontal 2-1/2” - 3”**1050 1-1/2” 8073925 SWG 20-SS 3/8”Horizontal 2-1/2”850 1-1/2” 8139957 SH-GST 20 3/8”17° Angle off Vertical 3”1050 1-1/2”4”1475 1-1/2” 8141957 SH-GST 30 3/8”17° Angle off Vertical 4”1500 1-1/2”4”1475 1-1/2” 14 For the most up to date information, visit www.sammysuperscrew.com SAMMYS® FOR STEEL Part No.Model Rod Size Mount Direction UL Max Pipe Size UL Test Load (lbs)UL Min. SteelThickness FM Max Pipe Size FM Test Load (lbs)FM Min. SteelThickness 8038957 DSTR 1 3/8”Vertical 4”1500 .035”4”1475 .105” 8037957 DSTR 1-1/2 3/8” Vertical 4”1500 .035”4”1475 .105” 8039957 DSTR 516 3/8”Vertical 4”1500 .037”4”1475 .105” 8045957 DST 516 3/8”Vertical 4”1500 .188”4”1475 .188” 8046957 TEK 50 3/8”Vertical 4”1500 .250”4”1475 .188” 8055957 SWDR 1 3/8”Horizontal 4”1500 .037”4”1475 .060” 8056957 SWDR 516 3/8”Horizontal 4”1500 .037”4”1475 .060” 8054957 SWDR 1-1/2 3/8”Horizontal 4”1500 .037”4”1475 .060” 8137957 SH-DSTR 1 3/8”17° Angle off Vertical 4”1500 .035”4”1475 .105” 8150922 XP 20 3/8”Vertical 2-1/2”850 .027”2”940 .029” 4”1475 .105” 8153922 XP 35 3/8”Vertical 3-1/2”1250 .060”2”940 .029” 4”1475 .105” 8294922 SXP 20 3/8”Vertical or up to 45°2”750 .027”2”635 .029” 8295922 SXP 35 3/8”Vertical or up to 89°3-1/2”1250 .060”2”635 .029” 8293957 SWXP 35 3/8”Horizontal 3-1/2”1250 .060” SAMMYS® FOR CONCRETE Part No.Model Rod Size Mount Direction UL Max Pipe Size UL Test Load (lbs)UL MinPSI FM Max Pipe Size FM Test Load (lbs)FM MinPSI 8059957 CST 20 3/8”Vertical 4”1475 3000 8061957 SWC 20 3/8”Horizontal 4”1475 3000 8150922 XP 20 3/8”Vertical 2-1/2”850 Pre-Pour Structural @ 3000psi 8150922 XP 20 3/8”Vertical 2-1/2”850 Post-Pour Range II LWC ≤ 35 PCF (lbs/ft3) TRUSS-T HANGER® Part No.Model Rod Size Mount Direction UL Load Rating (lbs)UL Test Load (lbs)Listed Application 8296900 HD38TC 3/8”Top Chord 1200 6075 Maximum 4” Schedule 40 pipe 8297900 HD38BC 3/8”Bottom Chord 1200 6075 Maximum 4” Schedule 40 pipe 8198900 HD12CZP 1/2”Bottom Chord 1200 6075 Maximum 8” Schedule 40 Pipe 8298900 HD12TC 1/2”Top Chord 1200 6075 Maximum 8” Schedule 40 Pipe 8299900 HD12BC 1/2”Bottom Chord 1200 6075 Maximum 8” Schedule 40 Pipe APPROVALS APPROVALS APPROVALS APPROVALSPipe Hanger Pipe Hanger Pipe Hanger Pipe Hanger PIPE HANGER *SWG 25-380 Maximum pipe size in composite wood joist allowed by UL is 3-1/2”*SWG 25-380 Maximum pipe size in wood timber or joist allowed by UL is 4”**SWG 20 Maximum pipe size in composite wood joist allowed by UL is 2-1/2”**SWG 20 Maximum pipe size in wood timber or joist allowed by UL is 3” UL compliance with NEC Standards.UL and FM tests were performed in compliance with NFPA 13 Standards.Fastening requirement: 5 times weight of water-filled schedule 40 pipe plus 250 pounds.