Loading...
HomeMy WebLinkAboutA14-0011 SD500-ANM.pdfDescriptionThe SD500-ANM is an Addressable Notification Module foruse with the IntelliKnight fire alarm control panel. TheSD500-ANM provides a single class A or B circuit that iscontrolled by the IntelliKnight's Signaling Line Circuit.Power for the circuit is provided to the SD500-ANM modulefrom a separate power supply, making it easy to powerremote devices. The notification circuit, remote power andcommunication to the SD500-ANM are supervised by theIntelliKnight control panel.OperationEach notification module is programmed with a unique SLCloop address. When an event that controls the notificationmodule occurs, the notification switches its built-in relayfeeding power from the auxiliary power input to thenotification appliance.Features•Class A (Style Z) or Class B (Style Y) Notification Circuit.•Flexible programming—choose the cadence pattern(twelve standard & four user-defined).•Polling LED visible through cover plate.•Adds up to 127 independent output circuits on each SLCloop.•Supervised auxiliary power source input.•Completely supervised.SpecificationsOperating Voltage:24 VDCSLC Current:.55 mAAux. Power Current:Alarm:56 mAStandby:6 mANotificationAppliance Current:2 Amp Max.Ambient Temperature:32ºF to 120ºF (0ºC to 49ºC)Mounting:4-square electrical box. SD500-ANM The SD500-ANM gives you the flexibility to add notification circuits wherever you need them. The SD500-ANMis a supervised addressable notification device that provides you with additional notification circuits on theIntelliKnight SLC loop. Up to 127 SD500-ANM modules can be used on an SLC loop. The SD500-ANM providesa reverse polarity Class A or Class B notification appliance circuit with an aux power input. Each SD500-ANM isprovided power from a separate power supply and is controlled and supervised by the main panel. Power canbe provided near the signaling appliance to reduce the wire gauge requirements or can come from a main powersupply and be controlled separately by the individual notification modules. The SD500-ANM can produce all 16of the notification patterns available on the FACP. Intelligent Notification Module INTELLIKNIGHT ACCESSORY Listings•UL listed, complies with NFPA 72•CSFM•MEA 429-92-E, Vol. 9 Compatible Control Panels•5820XL•5820XL-EVS•5808•5700 SD500-ANM INTELLIKNIGHT ACCESSORY Model SD500-ANMIntelligent Notification Module MADE IN AMERICA FORM# 350220 Rev D© 2013 Honeywell International Inc. This document is not intended to be used for installation purposes. We try tokeep our product information up-to-date and accurate. We cannot cover allspecific applications or anticipate all requirements. All specifications aresubject to change without notice. For more information, contact Silent Knight12 Clintonville Road, Northford, CT 06472-1610 Phone: (800) 328-0103,Fax: (203)484-7118. For Technical Support, Please Call 800-446-6444.www.silentknight.com Engineering Specifications The contractor shall furnish and install where indicated on the plans, addressable notification modules, SilentKnight SD500-ANM. The modules shall be UL listed compatible with a Silent Knight IntelliKnight fire alarmcontrol panel.The notification module must provide one Class A (Style Z) or Class B (Style Y) notification output with oneauxiliary power input.The notification module must be suitable for mounting in a standard 4-square electrical box and must include aplastic cover plate. The notification module must provide an LED that is visible from the outside of the coverplate.The notification output must be fully programmable for such applications as are required by the installation. Model SD500-ANM Addressable Notification Module