Loading...
HomeMy WebLinkAboutA14-0064 MIM specs.pdfDescriptionThe SD500-AIM and SD500-MIM areaddressable input modules for use withthe Intelliknight fire alarm controlpanels (FACPs). The SD500-AIMaddressable input module mounts to a4"-square box. The SD500-MIM miniinput module fits inside a single gangbox. Both input modules are designedto be used with pull stations, water flowswitches, and other applicationsrequiring dry contact alarm initiationdevices. These modules are supervised, singleinput contact monitors. Using an EOLresistor, they monitor for alarm contactclosures and for open circuit wiringfault conditions. If a fault occurs in thewiring, the module alerts the FACP.Each addressable input module isprogrammed with a unique signal linecircuit (SLC) loop address.Features• Single contact monitor• Support for Class A (Style 6 & Style7) or Class B (Style 4) wiring• Attractive ivory cover plate with theSD500-AIM•Small and lightweight size allows forflexible mounting options with theSD500-MIM• DIP switch programmable for fastinstallation • Up to 2500 ft wiring distance fromeither input module to contact• Use up to 14 gauge wire•UL listedElectrical SpecificationsStandby Current: 0.55 mAAlarm Current: 23 mA max for onedevice; 46 mA max for two devices;0.55 mA for each additional deviceLine Resistance: 50 maxMechanical SpecificationsSD500-AIM Physical DescriptionDimensions:4.9" W x 4.9" H x 1" D(12.4 W x 12.4 H x 2.5 D cm)Weight: 3.6 oz (120.1 g)Color: Ivory cover plateSD500-MIM Physical DescriptionDimensions:1.5" W x 2.5" H x 0.7" D(3.8 W x 6.4 H x 1.8 D cm)Weight: 1.6 oz (45.4 g)EnvironmentalOperating Temperature:32ºF – 120ºF (0ºC – 49ºC)Humidity: 10% – 93% non-condensing ApprovalsNFPA 71 & NFPA 72UL 864 CSFM 7300-0559: 132MEA 429-92-E Vol. IXFM Approved for use with the 5820XL SD500-AIM & SD-500-MIMAddressable Input Modules The SD500-AIM and SD500-MIM are addressable input modules for usewith Silent Knight IntelliKnight fire alarm control panels (FACP). TheSD500-AIM and SD500-MIM are designed to be used with pull stations,water flow switches, and other applications requiring dry contact alarm initiation devices. The SD500-AIM addressable input module mounts to a 4"-square box. The SD500-MIM mini input module fitsinside a single gang box. The modules are supervised, single input contact monitors. Using an EOL resister,they monitor for alarm contact closures and for open circuit wiring fault conditions.The SD500-AIM and SD500-MIM offer a compact design for adaptability and pleasing aesthetics as well as easyinstallation and stable operation—a flexible solution for all your fire protection needs.For more information about the IntelliKnight system, or to locate your nearest source, please call 1-800-446-6444, or in Minnesota, call 763-493-6435. IntelliKnight's addressable contact monitormodules combine fast response with pinpointlocation ID. A combination that saves lives andproperty. INTELLIKNIGHT ACCESSORY SD500-MIM SD500-AIM INTELLIKNIGHT ACCESSORY MADE IN AMERICA FORM# 350231 Rev.C, 05/06Copyright © 2006 Silent Knight This document is not intended to be used for installation purposes. We try tokeep our product information up-to-date and accurate. We cannot cover allspecific applications or anticipate all requirements. All specifications aresubject to change without notice. For more information, contact Silent Knight7550 Meridian Circle Suite 100, Maple Grove, Mn 55369-4927. Phone: (800) 328-0103, Fax: (763) 493-6475. CompatibilityIntelliKnight 5820 FACPIntelliKnight 5808 FACPIntelliKnight 5700 FACP Ordering InformationSD500-AIM Input ModuleAddressable input module with ivorycover plate.SD500-MIM Mini Input ModuleAddressable mini input module. SD500-AIM & SD500-MIMAddressable Input Modules Engineering Specifications The contractor shall furnish and install where indicated on the plans, addressable input modules Silent KnightSD500-AIM or SD500-MIM. The modules shall be UL listed and compatible with Silent Knight's IntelliKnightFACPs. The SD500-MIM shall fit inside a single gang electrical box. The SD500-AIM shall be supplied with a plasticcover and shall be suitable for mounting to a 4"-square or double gang electrical box. The SD500-AIMaddressable input module must provide a monitor LED that is visible from outside the cover plate