Loading...
HomeMy WebLinkAboutIDPheat_spec.pdfAddressable Thermal and Rate-of-RiseThermal Detectors CompatibilityThe IDP-Heat, IDP-Heat-HT, and IDP-Heat-ROR are compatible with thefollowing IDP-series detector bases:•IDP-6AB 6” Mounting Base•SSB501 4” Mounting Base*•SSB224BI 6” Isolator Base*•SSB224RB 6” Relay Base*•SSB501BHT-2 6” Temporal Sounder Base* The IDP-Heat, IDP-Heat-HT, and IDP-Heat-ROR are compatible with thefollowing FACPs:•IFP-2000/RPS-2000 Intelligent Fire Panel• IFP-1000 Intelligent Fire Panel•IFP-100 Intelligent Fire Panel• IFP-50 Intelligent Fire Panel *For ordering purposes, an SS has been added to theSystem Sensor part numbers. Example–SystemSensor PN for SSB501 is B501. P/N 350285 Rev DCopyright © 2008 Honeywell International Inc. IDP-Heat, IDP-Heat-HT, & IDP-Heat-RORThe IDP-Heat, IDP-Heat-HT, and IDP-Heat-ROR are plug in thermaldetectors, with integral communication, that provide features thatsurpass conventional detectors. These thermal detectors are for usewith Silent Knight IFP-series fire alarm control panels (FACPs).Detector sensitivity can be programmed from the FACP software.Sensitivity is continuously monitored and reported to the FACP.Point ID capability allows each detector’s address to be set withrotary address switches, providing exact detector locations forselective maintenance when chamber contamination reachesunacceptable levels.IDP-Heat is a fixed temperature thermal detector that uses athermistor sensing circuit to produce 135ºF (57ºC) fixed thermaldetection.IDP-Heat-HT is a variable high temperature detector that provideshigh temperature detection at 135ºF – 190ºF (57ºC – 88ºC).IDP-Heat-ROR is a fixed temperature and rate-of-rise thermaldetector that uses a thermistor sensing circuit to produce 135ºF(57ºC) thermal protection. Features• Sleek, low-profile design• Reliable analog communications for trouble-free operation• Age resistant polymer housing• Innovative thermistor sensing circuit • Superior EMI resistance for reliability• Variety of mounting options to meet any application• Dual LED indicators for 360º visibility• Detector transmits signal to indicate maintenance is required• Plug-in mounting provides ease of installation• Optional remote LED annunciator (PN SSRA400Z; SystemSensor®PN RA400Z)•Tamper-proof feature available on mounting bases• Rotary address switches for fast installation•UL Listed InstallationThe IDP thermal detectors plug into a compatible IDP-seriesdetector base. IDP-Heat Installed in the IDP-6AB Mounting Base(Base Not Included) MEA383-02-E Vol. VI 7550 Meridian Circle, Suite 100Maple Grove, Mn 55369-4927763-493-6455 or 800-328-0103Fax: 763-493-6475www.farenhyt.com Specifications*PhysicalHeight: 2.0” (5.0 cm)Diameter: 4.1” (10.4 cm)Shipping Weight: 4.8 oz (136 g)ElectricalOperating Voltage: 15 – 32 VDCStandby CurrentIDP-Heat:200 A @ 24 VDC (no communication; LED off)300 A @ 24 VDC (one communication every 5 sec withLED enabled)IDP-Heat-HT & IDP-Heat-ROR:150 A @ 24 VDC (no communication; LED off)200 A @ 24 VDC (one communication every 5 sec withLED enabled)Alarm Current: 6.5 mA @ 24 VDC max (with LED on)EnvironmentalOperating Temperature IDP-Heat & IDP-Heat-ROR: -4º – 100ºF (20ºC – 38ºC)IDP-Heat-HT:-4º – 150ºF (20ºC – 66ºC)Humidity: 10% – 93% non-condensingThermal RatingsIDP-Heat: Fixed temperature setpoint 135ºF (57ºC)IDP-Heat-HT: High temperature heat 135ºF – 190ºF (57ºC – 88ºC)IDP-Heat-ROR: Rate-of-rise detection 15ºF/min (9ºC/min) Ordering InformationIDP-Heat Fixed Temperature Thermal DetectorIDP-Heat-HT Fixed High Temperature Thermal DetectorIDP-Heat-ROR Fixed Temperature and Rate-of-RiseThermal Detector Accessories†SSRA400Z Remote LED Annunciator.SSRMK400 Recessed Mounting Kit. Provides lowprofile for use with B501.SSXR2B Detector Removal Tool. A removal andreplacement tool for IDP plug-in detectors.Includes the T55-127-000.SSM02-04-00 Replacement Test Magnet.SSM02-09-00 Test Magnet with Telescoping Handle.SSXP-4 Extension Pole for XR2B. Extends from 5 –15 ft.SST55-127-000 Detector Removal Head.SSBCK-200B Black Detector Kit. For IDP-seriesdetectors. *Unless otherwise noted, specifications apply to all IDP thermaldetectors.†For ordering purposes, an SS has been added to the System Sensorpart numbers. Example–System Sensor PN for SSB501 is B501. Made in the U.S.A. This document is not intended to be used for installation purposes. We try to keep ourproduct information up-to-date and accurate. We cannot cover all specific applicationsor anticipate all requirements. All specifications are subject to change without notice.For more information, contact Silent Knight 7550 Meridian Circle Suite 100, MapleGrove, Mn 55369-4927. Phone: (800) 328-0103, Fax: (763) 493-6475.