The URL can be used to link to this page

Home My WebLink AboutIDPpull_spec.pdfAddressable Single Action and Dual ActionPull Stations CompatibilityThe IDP-Pull-SA and IDP-Pull-DA arecompatible with the following FACPs:•IFP-2000/RPS-2000 Intelligent Fire Panel• IFP-1000 Intelligent Fire Panel• IFP-100 Intelligent Fire Panel• IFP-50 Intelligent Fire Panel P/N 350286 Rev D©2007 Honeywell International Inc IDP-Pull-SA & IDP-Pull-DAThe IDP-Pull-SA is a single action pull station requiring only onemotion to activate the station. The IDP-Pull-DA is a dual action pullstation requiring two motions to active the station. Both pull stationsare designed to work with Silent Knight IFP-series fire alarm controlpanels (FACPs). Features• Installer can open station without causing an alarm condition • Dual-color LED is visible through handle of station blinks green toindicate normal operation and remains steady red in an alarmcondition •Key operated test and reset lock using lock plate actuator •Key matches compatible FACP locks •Meets the Americans with Disabilities Act Accessibility Guidelines(ADAAG) controls and operating mechanisms guidelines (Section4.1.3[13]) • Meets ADA requirement for 5 lbs maximum pull force to active • Shell, door, and handle molded from durable LEXAN ® • Reliable analog communications for trouble-free operation • Braille text on station handle • Handle latches in down position and the word Activated appears,clearly indicating the station has been pulled •Rotary address switches for fast installation • UL Listed, including UL 38, Standard of Manually ActuatedSignaling System InstallationThe IDP-Pull-SA and IDP-Pull-DA can be surface mounted to anSB-I/O surface back box or semi-flush mounted on a standard single-gang with a minimum depth of 2.13”(5.40 cm) or double-gangor 4” (10.61 cm) square electrical box. You can also use theoptional SSBG-TR (System Sensor®PN BG-TR) trim ring if thestation is being semi-flush mounted. IDP-Pull-SA IDP-Pull-DA 7550 Meridian Circle, Suite 100Maple Grove, Mn 55369-4927763-493-6455 or 800-328-0103Fax: 763-493-6475www.farenhyt.com MEA67-02-E Vol. IXFor IDP-Pull-DAFor IDP-Pull-DA Specifications*PhysicalHeight: 5.5” (14 cm)Width: 4” (10.2 cm)Depth: 5.4 oz. (3.7 cm)Housing Material: LEXAN polycarbonate resinBi-Colored LED:Blinking Green: NormalSteady Red: AlarmSwitch: Single pole, single throw (SPST) normally open (N/O)switch which closes upon activation of the pull stationElectricalOperating Voltage: 15–32 VDCOperating Current (LED flashing): 300 AWire Gauge: Up to 12 AWG (3.1 mm2) EnvironmentalOperating Temperature 32º – 120ºF (0ºC – 49ºC)Humidity: 10% – 93% non-condensing Ordering InformationIDP-Pull-SA Single Action Pull StationIDP-Pull-DA Dual Action Pull Station AccessoriesSSBG-TR†Optional trim ring.SB-I/O Surface backbox, indoor/outdoor. *Unless otherwise noted, specifications apply to IDP-Pull-SA and IDP-Pull-DA.†For ordering purposes, an SS has been added to the System Sensorpart numbers. Example–System Sensor PN for SSB501 is B501. Made in the U.S.A. This document is not intended to be used for installation purposes. We try to keep ourproduct information up-to-date and accurate. We cannot cover all specific applicationsor anticipate all requirements. All specifications are subject to change without notice.For more information, contact Silent Knight 7550 Meridian Circle Suite 100, MapleGrove, Mn 55369-4927. Phone: (800) 328-0103, Fax: (763) 493-6475.