Loading...
HomeMy WebLinkAboutifp100spec.pdfSingle Loop Analog/AddressableFire Alarm Control System P/N 350388 Rev E 04/21/06Copyright © 2006 Silent KnightJumpstart®is a Registered Trademark ofSilent Knight IFP-100IFP-100 is an intelligent analog/addressable fire control panel. The basicIFP-100 system has a single SLC loop and four notification appliancecircuits that can be programmed for notification outputs or auxiliary power.IFP-100 also has a built-in dual line digital fire communicator, Form Ctrouble relay, and two programmable Form C relays. The firmware haspowerful features, such as detector sensitivity, day/night thresholds, driftcompensation and pre-trouble maintenance alert.IFP-100 supports a variety of other devices that can be added to thesystem such as RA-100 remote annunciator, 5824 serial/parallel printerinterface module (for printing system reports), and 5496 intelligent powermodule, and Hochiki or Intelligent Device Protocol (IDP) devices. Features•Built-in support for up to127 Hochiki devices or 99 IDP detectors and 99IDP modules• Uses standard wire—no shielded or twisted pair required•Built-in digital communicator for remote reporting of system activity andsystem programming• Central station reporting by point or by zone• Jumpstart®auto-programming• Supports Class B (Style 4) and Class A (Style 6 or Style 7) configurationfor SLC• Distributed, intelligent power• Built-in synchronization for AMSECO, Gentex ®,Faraday, SystemSensor®,and Wheelock®appliances•Sensor sensitivity settings and day/night sensitivity setting•Automatic drift compensation•Notification circuits configurable as 2 Class A (Style Z), 4 Class B (StyleY), or auxiliary power for resettable, constant, or door holder power•Built-in annunciator with a backlit 80-character LCD display• RS-485 bus provides communication to system accessories•Built-in Form C trouble relay rated at 2.5 amps at 27.4 VDC• Two built-in Form C programmable relays rated at 2.5 amps at 27.4 VDC•SLC device locator can be used to locate a single or multiple devices onaSLC loop• System automatically performs detector sensitivity test•13 preset notification cadence patterns (including ANSI 3.41) and fouruser programmable patterns• Built-in RS-232 and USB interface for programming• Upload or download programming, event history, or detector status onsiteor from a remote location using a PC and 5650/5651 Silent KnightSoftware Suite (SKSS)• Improvements in SKSS deliver five times faster upload/downloads•Non volatile event history stores up to 1000 events• 125 Software zones and 125 output groups MEA429-92-E Vol. XIV IFP-100•6 amp power supply and maximum chargingcapacity of 35 amp hours (An additionalcabinet enclosure is required for batteries inexcess of 18 amp hours)•Integrated dead front panel protects operatorfrom exposure to electrical components• The FACP enclosure features a Plexiglass ®viewing window to protect annunciator• Programmable to automatically display oldestevent first or display tally of system events• Acknowledge function allows operator to keeptrack of event status•Programmable date setting for Daylight SavingTime InstallationThe IFP-100 can be surface or flush mounted. 7550 Meridian CircleMaple Grove, Mn 55369-4927763-493-64551-800-328-0103Fax: 763-493-7475http://www.farenhyt.com CompatibilityThe IFP-100 SLC supports multiple device types of the sameprotocol:• Hochiki• IDPYou cannot mix Hochiki and IDP devices on a FACP. However,any combination of addressable devices of the same protocolcan be used on the IFP-100. See Hochiki Devices specification sheet (PN 350360) and IDPDevice Protocol Devices specfication sheet (PN 350361) formore information. SpecificationsPhysicalFlush Mount Dimensions: 14.5”W x 24.75”H x 3.5”D(36.8 W x 62.9 H x 8.73 D cm)Overall Dimensions: 16”W x 26.4”H x 4.65”D(40.6 W x 67 H x 11.8 D cm)Weight: 28 lbs. (12.8 kg)Color: RedEnvironmentalOperating Temperature: 32ºF – 120ºF (0ºC – 49ºC)Humidity: 10% – 93% non-condensingElectricalPrimary AC: 120 VRMS @ 50/60 Hz, 2.5ATotal Accessory Load: 6A @ 27.4 VDC power-limitedStandby Current: 170 mAAlarm Current: 325 mABattery Charging Capacity: 7 to 35 AHBattery Size: 18 AH max. allowed in control panel cabinet.Larger capacity batteries can be housed in RBB accessorycabinet.Notification Appliance CircuitsFour circuits that can be programmed individually as:Notification Circuits: 3A per circuit @ 27.4 VDC, power-limitedAuxiliary Power Circuits: 3A per circuit @ 27.4 VDC, power-limitedIndicator LightsAlarm (Red): Flashes when in alarm; solid when alarm silencedSupervisory (Yellow): Flashes when a supervisory conditionexists; solid when supervisory silencedTrouble (Yellow): Flashes when a trouble condition exists; solidwhen trouble silencedSilenced (Yellow): Solid when an alarm, trouble or supervisorycondition has been silenced but not yet clearedPower (Green): Flashes for AC failure; solid when powersystems are normal Telephone Requirements: FCC Part 15 & Part 68 approvedJack: RJ31X (two required)ApprovalsNFPA 13, NFPA 15, NFPA 16, NFPA 70, & NFPA 72: Central Station; Remote Signalling; Local ProtectiveSignalling Systems; Auxiliary Protected Premises Unit; & WaterDeluge Releasing Service. Suitable for automatic, manual,waterflow, sprinkler supervisory (DACT non-coded) signallingservices.Other Approvals: UL Listed; CSFM 7170-0559: 142; MEA 429-92-E Vol. XIV Ordering InformationIFP-100 Intelligent Fire Alarm Control Panel. SBUS AccessoriesRA-100 Remote Annunciator. Same operation andsimilar appearance to FACP annunciator. RA-1000R Remote Annunciator. Four line LCDannunciator with 20 characters per line.Red.RA-1000 Remote Annunciator. Four line LCDannunciator with 20 characters per line.Gray.RPS-1000 Intelligent Power Module.5496 Intelligent Power Module.5824 Serial/Parallel Printer Interface Module.5880 LED I/O Module.5865-3 & 5865-4 LED Fire Annunciators.5883 Relay Interface Board.Hochiki and IDP DevicesSee the specification sheets listed below for a complete listingof the Hochiki and IDP devices.350360 Hochiki Devices Specification Sheet.350361 Intelligent Device Protocol DevicesSpecification Sheet.Miscellaneous Accessories5650/5651 Silent Knight Software Suite. Providesprogramming, upload/download, andevent reporting.5670 Silent Knight Software Suite. Providesfacility monitoring.RBB Remote Battery Box Accessory Cabinet.Use if backup batteries are too large to fitinto FACP cabinet. Dimensions:16” W x 10” H x 6” D(406 mm W x 254 mm H x 152 mm D) Made in the U.S.A. This document is not intended to be used for installation purposes. We try to keep ourproduct information up-to-date and accurate. We cannot cover all specific applicationsor anticipate all requirements. All specifications are subject to change without notice.For more information, contact Silent Knight 7550 Meridian Circle Suite 100, MapleGrove, Mn 55369-4927. Phone: (800) 328-0103, Fax: (763) 493-6475.