Loading...
HomeMy WebLinkAboutSilent Knight SK-Pull.pdfDescriptionThe SK-Pull-SA is a single action pull station requiring onlyone motion to activate the station. The SK-Pull-DA is a dualaction pull station requiring two motions to active the station.Both pull stations are designed to work with Silent KnightIntelliknight series fire alarm control panels (FACPs).Features•Installer can open station without causing an alarmcondition•Dual-color LED is visible through handle of station blinksgreen to indicate normal operation and remains steady redin an alarm condition•Key operated test and reset lock using lock plate actuator•Key matches compatible FACP locks•Meets the Americans with Disabilities Act AccessibilityGuidelines (ADAAG) controls and operating mechanismsguidelines (Section 4.1.3[13])•Meets ADA requirement for 5 lbs maximum pull force toactive•Shell, door, and handle molded from durable LEXAN® •Reliable analog communications for trouble-free operation•Braille text on station handle•Handle latches in down position and the word Activatedappears, clearly indicating the station has been pulled•Rotary address switches for fast installation•UL Listed, including UL 38, Standard of Manually ActuatedSignaling System SK-Pull-SA and SK-Pull-DA The SK-Pull-SA and SK-Pull-DA are a single action or dual action addressable fire alarm pull station for use withSilent Knight's IntelliKnight fire control panel. Extremely easy to operate, the SK-Pull-DA and SK-Pull-SAprovide a fast and practical means of manually initiating a fire alarm signal. The IntelliKnight panel recognizeseach manual pull station by its specific address saving precious seconds in determining the location of an alarm. For more information about the IntelliKnight system, or to locate you nearest source, please call 1-800-328-0103. Intelligent Pull Stations INTELLIKNIGHT ACCESSORY CompatibilityThe SK-Pull-SA and SK-Pull-DA are compatiblewith the following IntelliKnight FACP’s:5600570058085820XL5820XL-EVS SK-Pull-SA SK-Pull-DA INTELLIKNIGHT ACCESSORY Model SK-Pull-DA and SK-Pull-SAIntelligent Pull Stations Engineering Specifications The contractor shall furnish and install where indicated on the plans, Addressable Pull Stations, Silent Knightmodel SK-Pull-SA single action pull station or SK-Pull-DA, dual action pull station.SK-Pull-DA or SK-Pull-SA meet the ADAAG controls and operating mechanisms guidelines, and the ADArequirements for a 5 lb. maximum pull force to activate the pull station. MADE IN AMERICA FORM# 350135 Rev C © 2013 Honeywell International Inc. This document is not intended to be used for installation purposes. We tryto keep our product information up-to-date and accurate. We cannot coverall specific applications or anticipate all requirements. All specifications aresubject to change without notice. For more information, contact SilentKnight 12 Clintonville Road, Northford, CT 06472-1610 Phone: (800) 328-0103, Fax: (203) 484-7118. For Technical Support,Please call 800-446-6444. www.silentknight.com SpecificationsPhysicalHeight: 5.5” (14 cm)Width: 4” (10.2 cm)Depth: 5.4 oz. (3.7 cm)Housing Material: LEXAN polycarbonate resinBi-Colored LED:Blinking Green: NormalSteady Red: AlarmSwitch: Single pole, single throw (SPST) normally open (N/O)switch which closes upon activation of the pull station ElectricalOperating Voltage: 15–32 VDCAverage Operating Current (LED flashing): 300 µAWire Gauge: Up to 12 AWG (3.1 mm2)EnvironmentalOperating Temperature 32º – 120ºF (0ºC – 49ºC)Humidity: 10% – 93% non-condensing AccessoriesBG-TR Optional trim ring.SB-I/O Surface backbox