HomeMy WebLinkAboutSchier GB-15.pdf25"
Outlet "B"
(Standard)
A
19"
INLET
Outlet "A"
(Optional)
alL.J=L4
Outlet "C"
(Optional)
TOP VIEW ISOMETRIC VIEW
OUTLET END VIEW
of plain end
inlet and outlet
8-13/16" invert
Engineered inlet and
outlet diffuser
(see description)
SECTION "A-A"
SPECIFICATIONS
1. 2" inlet/outlets Sch. 40. Plain End (No-Hub)
2. Max flow rate: 15 GPM
3. Liquid capacity: 16 Gallons
4. Max grease capacity: 74 lbs. (10.3 Gallons)
5. Max solids/sediment capacity: 3.9 Gallons
6. Unit weight w/std. covers: 26 lbs.
7. Standard bolted, gasketed, gas/water tight composite
covers handle 450 lbs. when unit is directly buried and
a 2,500 lbs. load when buried in SR16 riser.
8. Maximum operating temperature 190°F continuous.
9. Seamless molded polyethylene tank.
NOTES
1. Listed by IAPMO to ASME grease interceptor
standard #A112.14.3 and CSA 8481.1.
2. Factory installed Built-In Flow control.
3. For gravity drainage applications only. Do not use
for pressure applications.
4. Seamless high density polyethylene tank.
5. Riser is also available for burial.
6. Cover placement allows full access to tank for proper
maintenance.
7. Vent not required unless per local code.
8. Engineered inlet and outlet diffusers are removable
to inspect/clean piping.
9. For on-the-floor or buried applications.
10. Integral Air Relief / Anti-siphon.
11. Three outlet options for easy rough in. Unit
shipped with outlet diffuser in outlet "B".
DIFFUSION FLOW TECHNOLOGY
The inlet diffuser splits incoming effluent into two paths
that utilize the entire liquid volume of the tank for efficient
grease separation. The calibrated openings greatly reduce
effluent turbulence. The effluent enters the main chamber
without disturbing the existing grease or sediment layers.
The integral air relief/anti-siphon in the top of the outlet diffuser
allows pressure stabilization within the unit during operation.
The bottom of the outlet diffuser allows only effluent which is free of
grease to exit the tank. It can easily be attached to any
of the three outlets provided to ease jobsite piping layouts.
ENGINEER SPECIFICATION GUIDE
c ier reat:assn grease interceptor model # GB-15 shall
be lifetime guaranteed and made in USA of seamless, rotationally-
molded High Density Polyethylene. Interceptor shall be furnished
for above or below grade installation. Interceptor shall be
certified to ASME A112.14.3 (type C)and CSA 8481.1, with field
adjustable riser system, built-in flow control, built-in test
caps and three outlet options. Interceptor flow rate shall be 15 GPM.
Interceptor grease capacity shall be 74 lbs. Cover shall provide
water/gas-tight seal and have minimum 450 lbs load capacity.
OPTIONS:
• Teleglide field adjustable riser for extending cover to grade
• Male pipe thread connections
• 3" Plain end pipe or male pipe thread connections
• Clamping collar kit
MODEL NUMBER: GB-15
DESCRIPTION:
15 GPM POLYETHYLENE GREASE INTERCEPTOR
PART NUMBER: 4005-001-XX SPECIFICATION SHEET
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SCHIER PRODUCTS. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SCHIER PRODUCTS IS
PROHIBITED.
Schier Products
9500 Woodend Road
Edwardsville, KS 66111
Tel: 800-827-7119
Fax: 800-827-9664
www.schierproducts.com
Made in the U.S.A
SCHIER
PRODUCTS
Pioneering Drain Line Purity
DWG BY: N.EBERT DATE: 12/02/2013 REV: 1 ECO: 1035