Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
F14-0062 Sprinkler Submittals.pdf
Fire Sprinkler Equipment Submittal For McKenna Residence Manor Vail, Unit 386 Golden Peak Village Vail, CO 81657 Edward Kolecke NICET Level III # 94588 RAPID RESPONSE Series LFII Residential Sprinklers 4.9 K-factor Flat-Plate Concealed Pendent Wet Pipe and Dry Pipe Systems Technical Services 800-381-9312 +1-401-781-8220 www.tyco-fi re.com Page 1 of 6 APRIL 2012 TFP443 General Description The TYCO RAPID RESPONSE Series LFII Residential Flat-Plate Concealed Pendent Sprinklers (TY2524) are decora- tive, fast response, fusible solder sprin- klers designed for use in residential oc- cupancies such as homes, apartments, dormitories, and hotels. The Cover Plate/Retainer Assembly con- ceals the sprinkler operating compo- nents above the ceiling. The fl at profi le of the Cover Plate provides the optimum aesthetically appealing sprinkler design. Additionally, the concealed design of the Series LFII Residential Flat-Plate Con- cealed Pendent Sprinklers provides 1/2 inch (12,8 mm) vertical adjustment. This adjustment provides a measure of fl ex- ibility when cutting fi xed sprinkler drops. The Series LFII Residential Flat-Plate Concealed Pendent Sprinklers are in- tended for use in the following systems: • wet and dry pipe residential sprin- kler systems for one- and two-fam- ily dwellings and mobile homes per NFPA 13D • wet and dry pipe residential sprin- kler systems for residential occu- pancies up to and including four sto- ries in height per NFPA 13R • wet and dry pipe sprinkler systems for the residential portions of any occupancy per NFPA 13. The Series LFII Residential Sprinklers have been designed with heat sensitiv- ity and water distribution characteristics proven to help in the control of residen- tial fi res and to improve the chance for occupants to escape or be evacuated. The Series LFII Residential Flat-Plate Concealed Pendent Sprinklers are shipped with a Disposable Protective Cap. The Protective Cap protects the sprinkler during ceiling installation or fi nish. After ceiling installation is com- plete, the Protective Cap is removed and the Cover Plate/Retainer Assem- bly is installed. Removing the Protec- tive Cap is required for proper sprinkler performance. Dry Pipe System Application The Series LFII Residential Flat-Plate Concealed Pendent Sprinkler offers a laboratory approved option for design- ing dry pipe residential sprinkler sys- tems, whereas, most residential sprin- klers are laboratory approved for wet systems only. Through extensive testing and as ref- erenced in U.S. Patent 7,712,543, it has been determined that the number of de- sign sprinklers (hydraulic design area) for the Series LFII Residential Flat-Plate Concealed Sprinklers (TY2524) need not be increased over the number of design sprinklers (hydraulic design area) speci- fi ed for wet pipe sprinkler systems, as is customary for density/area sprinkler systems designed per NFPA 13, 13D, or 13R. Consequently, the Series LFII Residen- tial Flat-Plate Concealed Sprinklers (TY2524) offer the features of non-wa- ter fi lled pipe in addition to not having to increase the number of design sprinklers (hydraulic design area) for systems de- signed to NFPA 13, 13D, or 13R. Non- water fi lled pipe will permit options for areas sensitive to freezing. NOTICE The Series LFII Residential Flat-Plate Concealed Pendent Sprinklers (TY2524) described herein must be installed and maintained in compliance with this doc- ument and the applicable standards of the National Fire Protection Association, in addition to the standards of any au- thorities having jurisdiction. Failure to do so may impair the performance of these devices. The owner is responsible for maintain- ing their fi re protection system and de- vices in proper operating condition. The installing contractor or sprinkler manu- facturer should be contacted with any questions. Sprinkler Identifi cation Number (SIN) TY2524 IMPORTANT Always refer to Technical Data Sheet TFP700 for the “INSTALLER WARNING” that provides cautions with respect to handling and instal- lation of sprinkler systems and com- ponents. Improper handling and in- stallation can permanently damage a sprinkler system or its components and cause the sprinkler to fail to operate in a fi re situation or cause it to operate prematurely. TFP443 Page 2 of 6 FIGURE 3 PROTECTIVE CAP AND ACTIVATED DEFLECTOR — INSTALLATION DIMENSIONS — FIGURE 1 RAPID RESPONSE SERIES LFII RESIDENTIAL FLAT-PLATE CONCEALED PENDENT SPRINKLER (TY2524) — ASSEMBLY — PLATE COVER EJECTION SPRING DIMPLES WITH THREAD RETAINER ASSEMBLY SEALING COMPRESSION SCREW POSITION) (OPERATED DEFLECTOR FLUSH WITH SURFACE IS SUPPORT CUP UNTIL MOUNTING THREAD INTO SOLDER TAB CEILING DEFLECTOR CAP (1/2" NPT) BODY AREA WRENCHING SPRINKLER SADDLE ROLL FORMED THREADS CUP WITH SUPPORT ELEMENT SOLDER LINK LEVER GUIDE PIN HOUSING GUIDE PIN SPRINKLER/SUPPORT CUP COVER PLATE/RETAINER ASSEMBLY ASSEMBLY (81,0 mm) 3-3/16" DIA. 1/2" NPT (63,5 mm) 2-1/2" DIA. MOUNTING SURFACE (4,8 mm) 3/16" 1/8" GAP (3,2 mm) FITTING SPRINKLER FACE OF 7/8" (22,2 mm) 1-1/8" (28,6 mm) TIP OPERATED POSITION DEFLECTOR IN 1/2" (12,7 mm) ADJUSTMENT THREADED SPRINKLER- SUPPORT CUP ASSEMBLY OPERATED SPRINKLER 1-7/8"±1/8" ±3,2 mm) (47,6 mm SPRINKLER- SUPPORT CUP ASSEMBLYASSEMBLY COVER- RETAINER COVER PLATE RETAINER DISPOSABLE PROTECTIVE CAP FIGURE 2 W-TYPE 18 — SPRINKLER WRENCH — RECESS WRENCH WITH SPRINKLER ENGAGEMENT IN TO ENSURE WRENCHING AREA PUSH WRENCH TFP443 Page 3 of 6 Technical Data Approvals UL and C-UL Listed The TYCO RAPID RESPONSE Series LFII Residential Flat-Plate Concealed Pendent Sprinklers are only listed with the Series LFII Concealed Cover Plates having a factory-applied fi nish. For details on approvals, refer to the De- sign Criteria section. Maximum Working Pressure 175 psi (12,1 bar) Discharge Coeffi cient K=4.9 GPM/psi1/2 (70,6 LPM/bar1/2) Temperature Rating Sprinkler: 160°F (71°C) Cover Plate: 139°F (59°C) Vertical Adjustment 1/2 inch (12,7 mm) Finishes Refer to the Ordering Procedure section. Physical Characteristics Cover Plate/Retainer Assembly: Cover Plate . . . . . . . . . . . . . Copper Ejection Spring . . . . Stainless Steel Retainer . . . . . . . . . . . . . . . . Brass Sprinkler/Support Cup Assembly: Body . . . . . . . . . . . . . . . . . . . Brass Cap . . . . . . . . . . . . . . . . . . . Bronze Saddle . . . . . . . . . . . . . . . . . . Brass Sealing Assembly . . . . . . .Beryllium Nickel w/ TEFLON Soldered Link Halves . . . . . . Nickel Lever . . . . . . . . . . . . . . . . . . Bronze Compression Screw . . . . . . . Brass Defl ector . . . . . . . . . . . . . . . Bronze Guide Pin Housing. . . . . . . . Bronze Guide Pins . . . . . . . . . . . . . Bronze Support Cup . . . . . . . . . . . . . . Steel Operation When exposed to heat from a fi re, the Cover Plate, which is normally soldered to the Retainer at three points, falls away to expose the Sprinkler/Support Cup As- sembly. At this point, the Defl ector, sup- ported by the Guide Pins, drops down to its operated position. The Solder Link Element of the Sprinkler/ Support Cup Assembly is comprised of two link halves that are soldered togeth- er with a thin layer of solder. When the rated temperature is reached, the sol- der melts and the two link halves sepa- rate, allowing the sprinkler to activate and fl ow water. Design Criteria The TYCO RAPID RESPONSE Series LFII Residential Flat-Plate Concealed Pendent Sprinklers (TY2524) are UL and C-UL Listed for installation in ac- cordance with this section: Residential Sprinkler Design Guide When conditions exist that are outside the scope of the provided criteria, re- fer to the Residential Sprinkler Design Guide TFP490 for the manufacturer's recommendations that may be accept- able to the authority having jurisdiction. System Type Per the UL Listing, wet pipe and dry pipe systems may be utilized. Per the C-UL Listing, only wet pipe systems may be utilized. Refer to Technical Data Sheet TFP485 about the use of Residential Sprinklers in residential dry pipe systems. Hydraulic Design (NFPA 13D and 13R) For systems designed to NFPA 13D or NFPA 13R, the minimum required sprin- kler fl ow rate are given in Tables A and B as a function of temperature rating and the maximum allowable coverage areas. The sprinkler fl ow rate is the mini- mum required discharge from each of the total number of “design sprinklers” as specifi ed in NFPA 13D or NFPA 13R. The number of “design sprinklers” spec- ifi ed in NFPA 13D and 13R for wet pipe systems is to be applied when designing dry pipe systems. Hydraulic Design (NFPA 13) For systems designed to NFPA 13, the number of design sprinklers is to be the four most hydraulically demanding sprinklers. The minimum required dis- charge from each of the four sprinklers is to be the greater of the following: • The fl ow rates given in Tables A and B as a function of temperature rating and the maximum allowable cover- age area. • A minimum discharge of 0.1 gpm/ft2. over the “design area” comprised of the four most hydraulically demand- ing sprinklers for the actual coverage areas being protected by the four sprinklers. The number of “design sprinklers” specifi ed in NFPA 13 for wet pipe sys- tems is to be applied when designing dry pipe systems. Dry Pipe System Water Delivery When using the Series LFII Residential Flat-Plate Concealed Pendent Sprinklers (TY2524) in dry pipe sprinkler systems, the time for water delivery exceed 15 seconds for the most remote operat- ing sprinkler. Obstruction to Water Distribution. Sprinklers are to be located in accor- dance with the obstruction rules of NFPA 13D, 13R, and 13 as applicable for residential sprinklers as well as with the obstruction criteria described within the Technical Data Sheet TFP490. Operational Sensitivity Install sprinklers relative to the ceiling mounting surface as shown in Figure 3. The Series LFII Residential Flat-Plate Concealed Pendent Sprinklers must not be used in applications where the air pressure above the ceiling is greater than that below. Down drafts through the Support Cup can delay sprinkler op- eration in a fi re situation. Sprinkler Spacing The minimum spacing between sprin- klers is 8 feet (2,4 m). The maximum spacing between sprinklers cannot ex- ceed the length of the coverage area (Table A) being hydraulically calculated (e.g., a maximum of 12 feet for a 12 ft. x 12 ft. coverage area or 20 feet for a 20 ft. x 20 ft. coverage area.) TFP443 Page 4 of 6 Maximum Coverage Area (a) Ft. x Ft. (m x m) Maximum Spacing Ft. (m) DRY PIPE SYSTEM (b) Minimum Flow and Residual Pressure Horizontal Ceiling Minimum Flow and Residual Pressure (c) (Maximum 2 Inch Rise for 12 Inch Run) 160°F (71°C) Sprinkler 12 x 12 (3,7 x 3,7) 12 (3,7) 15 GPM (56,8 LPM) 9.4 psi (0,65 bar) 14 x 14 (4,3 x 4,3) 14 (4,3) 15 GPM (56,8 LPM) 9.4 psi (0,65 bar) 16 x 16 (4,9 x 4,9) 16 (4,9) 16 GPM (60,6 LPM) 10,7 psi (0,74 bar) 18 x 18 (5,5 x 5,5) 18 (5,5) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 20 x 20 (6,1 x 6,1) 20 (6,1) 21 GPM (79,5 LPM) 18,4 psi (1,27 bar) (a) For coverage area dimensions less than or between those indicated, use the minimum required fl ow for the next highest coverage area for which Hydraulic Design section under the Design Criteria are stated. (b) The Minimum Flow requirement is based on minimum fl ow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. Refer to “Hydraulic Design” in the Design Criteria section for details. (c) For NFPA 13 residential applications, the greater of 0.1 gpm/ft.2 over the design area or the fl ow in accordance with the criteria in this table must be used. TABLE B SERIES LFII RESIDENTIAL FLAT-PLATE CONCEALED PENDENT SPRINKLER (TY2524) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA — DRY PIPE SYSTEMS — Maximum Coverage Area (a) Ft. x Ft. (m x m) Maximum Spacing Ft. (m) WET PIPE SYSTEM (b) Minimum Flow and Residual Pressure Horizontal Ceiling (c, d, e) (Maximum 2 inch rise for 12 inch run) Sloped Ceiling(c, d, e) (Greater than 2 inch rise up to maximum 4 inch rise for 12 inch run) Sloped Ceiling(c, d, e) (Greater than 4 inch rise up to maximum 8 inch rise for 12 inch run) 160°F (71°C) Sprinkler 160°F (71°C) Sprinkler 160°F (71°C) Sprinkler 12 x 12 (3,7 x 3,7) 12 (3,7) 13 GPM (49,2 LPM) 7.0 psi (0,48 bar) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 14 x 14 (4,3 x 4,3) 14 (4,3) 13 GPM (49,2 LPM) 7.0 psi (0,48 bar) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 16 x 16 (4,9 x 4,9) 16 (4,9) 13 GPM (49,2 LPM) 7.0 psi (0,48 bar) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 18 x 18 (5,5 x 5,5) 18 (5,5) 17 GPM (64,3 LPM) 12.0 psi (0,83 bar) 22 GPM (83,3 LPM) 20.2 psi (1,39 bar) 22 GPM (83,3 LPM) 20.2 psi (1,39 bar) 20 x 20 (6,1 x 6,1) 20 (6,1) 20 GPM (75,7 LPM) 16.7 psi (1,15 bar) 24 GPM (90,8 LPM) 24.0 psi (1,65 bar) 24 GPM (90,8 LPM) 24.0 psi (1,65 bar) (a) For coverage area dimensions less than or between those indicated, use the minimum required fl ow for the next highest coverage area for which Hydraulic Design section under the Design Criteria are stated. (b) The Minimum Flow requirement is based on minimum fl ow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated using the nominal K-factor. Refer to “Hydraulic Design” in the Design Criteria section for details. (c) For NFPA 13D 2010 applications, Horizontal Ceiling criteria shall be used for certain sloped ceiling confi gurations up to 8:12 pitch. Refer to TIA 1028R for allowed sloped ceiling limitations when using horizontal ceiling criteria. (d) For NFPA 13R applications, Horizontal Ceiling criteria may be used for sloped ceiling confi gurations up to 8:12 pitch when acceptable to the local authority having jurisdiction. (e) For NFPA 13 residential applications, the greater of 0.1 gpm/ft.2 over the design area or the fl ow in accordance with the criteria in this table must be used. TABLE A SERIES LFII RESIDENTIAL FLAT-PLATE CONCEALED PENDENT SPRINKLER (TY2524) NFPA 13D, 13R, AND 13 HYDRAULIC DESIGN CRITERIA — WET PIPE SYSTEMS — TFP443 Page 5 of 6 Installation The TYCO RAPID RESPONSE Series LFII Residential Flat-Plate Concealed Pendent Sprinklers must be installed in accordance with this section: General Instructions Damage to the Solder Link Element dur- ing installation can be avoided by han- dling the sprinkler by the Support Cup only; that is, do not apply pressure to the Solder Link Element (Figure 1). A leak-tight 1/2 inch NPT sprinkler joint should be obtained by applying a min- imum-to-maximum torque of 7 to 14 ft.-lbs. (9,5 to 19,0 Nm). Higher levels of torque can distort the sprinkler inlet with consequent leakage or impairment of the sprinkler. Do not attempt to compensate for insuf- fi cient adjustment in the Cover Plate/ Retainer Assembly by under- or over- tightening the sprinkler. Re-adjust the position of the sprinkler fi tting to suit. Step 1. Install pendent sprinklers in the pendent position, with the center- line of the sprinkler perpendicular to the mounting surface. Step 2. Remove the Protective Cap. Step 3. With pipe-thread sealant ap- plied to the pipe threads, and using the W-Type 18 Wrench shown in Figure 2, install and tighten the Sprinkler/Sup- port Cup Assembly into the fi tting. The W-Type 18 Wrench accepts a 1/2 inch ratchet drive. Step 4. Replace the Protective Cap by pushing it upwards until it bottoms out against the Support Cup. The Protec- tive Cap helps prevent damage to the Defl ector and Guide Pins during ceiling installation and/or during application of the fi nish coating of the ceiling. NOTICE As long as the protective Cap remains in place, the system is considered “Out Of Service”. Step 5. After the ceiling has been com- pleted with the 2-1/2 inch (63 mm) diam- eter hole and in preparation for install- ing the Cover Plate/Retainer Assembly, remove and discard the Protective Cap, and verify that the Defl ector moves up and down freely. If the sprinkler has been damaged and the defl ector does not move up and down freely, replace the entire sprinkler assembly. Do not attempt to modify or repair a damaged sprinkler. Step 6. Screw on the Cover Plate/Re- tainer Assembly until its fl ange contacts the ceiling. Do not continue to screw on the Cover Plate/Retainer Assembly such that it lifts a ceiling panel out of its normal position. If the Cover Plate/Retainer Assembly cannot be engaged with the Mounting Cup or the Cover Plate/Retainer Assem- bly cannot be engaged suffi ciently to contact the ceiling, the Sprinkler Fitting must be repositioned. Care and Maintenance The TYCO RAPID RESPONSE Series LFII Residential Flat-Plate Concealed Pendent Sprinkler (TY2524) must be maintained and serviced in accordance with ths section: Before closing a fi re protection system main control valve for maintenance work on the fi re protection system that it con- trols, obtain permission to shut down the affected fi re protection system from the proper authorities and notify all person- nel who may be affected by this action. Absence of a Cover Plate may delay the sprinkler operation in a fi re situation. The owner must assure that the sprin- klers are not used for hanging any ob- jects and that the sprinklers are only cleaned by means of gently dusting with a feather duster; otherwise, non-opera- tion in the event of a fi re or inadvertent operation may result. When properly installed, there is a nomi- nal 1/8 inch (3,2 mm) air gap between the lip of the Cover Plate and the ceil- ing, as shown in Figure 3. This air gap is necessary for proper operation of the sprinkler by allowing heat fl ow from a fi re to pass below and above the Cover Plate to help assure appropriate release of the Cover Plate in a fi re situation. If the ceiling needs repainting after sprinkler installation, exercise care to ensure that the new paint does not seal off any of the air gap. Failure to do so may impair sprinkler operation. Factory painted Cover Plates must not be repainted. They should be replaced, if necessary, by factory painted units. Non-factory applied paint may adversely delay or prevent sprinkler operation in the event of a fi re. Do not pull the Cover Plate relative to the Retainer. Separation may result. Sprinklers which are found to be leaking or exhibiting visible signs of corrosion must be replaced. Automatic sprinklers must never be painted, plated, coated, or otherwise altered after leaving the factory. Modi- fi ed or overheated sprinklers must be replaced. Care must be exercised to avoid dam- age to the sprinklers - before, during, and after installation. Sprinklers dam- aged by dropping, striking, wrench twist/ slippage, or the like, must be replaced. The owner is responsible for the in- spection, testing, and maintenance of their fi re protection system and devices in compliance with this document, as well as with the applicable standards of the National Fire Protection Association (e.g., NFPA 25), in addition to the stan- dards of any other authorities having ju- risdiction. Contact the installing contrac- tor or sprinkler manufacturer regarding any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualifi ed Inspec- tion Service in accordance with local requirements and/or national codes. TFP443 Page 6 of 6 Copyright © 2012 Tyco Fire Protection Products. All rights reserved. TEFLON is trademark of The DuPont Corporation. Limited Warranty Products manufactured by Tyco Fire Production Products (TFPP) are war- ranted solely to the original Buyer for ten (10) years against defects in ma- terial and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFPP. No warran- ty is given for products or components manufactured by companies not af- fi liated by ownership with TFPP or for products and components which have been subject to misuse, improper in- stallation, corrosion, or which have not been installed, maintained, modifi ed or repaired in accordance with applicable Standards of the National Fire Protec- tion Association, and/or the standards of any other authorities having jurisdiction. Materials found by TFPP to be defec- tive shall be either repaired or replaced, at TFPP’s sole option. TFPP neither as- sumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. TFPP shall not be responsible for sprinkler system design errors or inaccurate or incomplete in- formation supplied by Buyer or Buyer’s representatives. In no event shall TFPP be liable, in con- tract, tort, strict liability or under any other legal theory, for incidental, indi- rect, special or consequential damages, including but not limited to labor charg- es, regardless of whether TFPP was in- formed about the possibility of such damages, and in no event shall TFPP’s liability exceed an amount equal to the sales price. The foregoing warranty is made in lieu of any and all other warranties, express or implied, including warranties of mer- chantability and fi tness for a particular purpose. This limited warranty sets forth the ex- clusive remedy for claims based on fail- ure of or defect in products, materials or components, whether the claim is made in contract, tort, strict liability or any oth- er legal theory. This warranty will apply to the full extent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Procedure Contact your local distributor for avail- ability. When placing an order, indicate the full product description and Part Number (P/N). Sprinkler/Support Cup Assembly Specify: Series LFII (TY2524), K=4.9 (70,6), Residential Flat-Plate Concealed Pendent Sprinkler without Cover Plate/ Retainer Assembly, P/N 51-114-1-160. Cover Plate/Retainer Assembly for Horizontal or Sloped Ceiling Applications Specify: Series LFII (TY2524), K=4.9 (70,6), Residential Flat-Plate Concealed Pendent Sprinkler Cover Plate/Retain- er Assembly with (specify) fi nish, P/N (specify): Off White . . . . . . . . . . . . . . . . P/N 56-201-0-135 Pure White* (RAL9010) . . . . . . . . . . . . . . P/N 56-201-3-135 Signal White** (RAL9003) . . . . . . . . . . . . . . P/N 56-201-4-135 Standard White (Grey White) (RAL9002) . . . . . . . . . . . . . . P/N 56-201-5-135 Custom . . . . . . . . . . . . . . . . . . .P/N 56-201-X-135 * Eastern Hemisphere sales only ** Previously known as Bright White Note: All Custom Cover Plates are painted us- ing Sherwin Williams Interior Latex Paint. Contact TYCO Customer Service with any questions related to custom orders. Optional Cover Plate/Retainer As- sembly for Horizontal Ceiling Applications Only Specify: Series LFII (TY2524), K=4.9 (70,6), Residential Flat-Plate Concealed Pendent Sprinkler Cover Plate/Retain- er Assembly with (specify) fi nish, P/N (specify): Off White . . . . . . . . . . . . . . . . .P/N 56-122-0-135 Pure White* (RAL9010) . . . . . . . . . . . . . . . . P/N 56-122-3-135 Signal White** (RAL9003) . . . . . . . . . . . . . . . . P/N 56-122-4-135 Custom . . . . . . . . . . . . . . . . . . . P/N 56-122-X-135 * Eastern Hemisphere sales only ** Previously known as Bright White Note: All Custom Cover Plates are painted us- ing Sherwin Williams Interior Latex Paint. Contact TYCO Customer Service with any questions related to custom orders. Sprinkler Wrench Specify: W-Type 18 Sprinkler Wrench, P/N 56-000-1-265. Superior Coating Dyna-Thread – M-COAT products are coated with an environmentally approved and specially formulated modified-acrylic or water-based coating. This durable coating is paintable and acts as an excellent primer while resisting weather and UV degradation from outdoor storage. The internal surface of all black Allied Tube & Conduit fire sprinkler pipe products are coated with M-COAT, an advanced MIC coating that is FM approved for use American Made Able to meet “Buy American” requirements, and is available through distributors in the USA, Canada, Mexico and Latin America. Specifications & Approvals Dyna-Thread – M-COAT pipe is manufactured to meet ASTM A-135, Type E Grade A, is in compliance with NFPA-13 and all sizes are rated at 300 psi working pressure. Dyna-Thread – M-COAT is UL and cUL listed for wet, dry deluge and pre-action sprinkler systems and FM approved for use in wet systems. Dyna-Thread – M-COAT can be hot dip galvanized** to meet FM requirements for use in dry systems. Dyna-Thread – M-COAT is approved for all threaded couplings and welded outlets and is suitable for all roll-grooved and plain end fittings. • Exceptional hydraulics • Lightweight and easy to install • Available factory roll grooved • M-COAT ID • UL and cUL listed • FM approved Combining the safety and longevity of Sch-40 with quality and hydraulic advantages. Dyna-Thread® – M-COAT® pipe is the full line Schedule 40 replacement with the same CRR of Schedule 40, 1.00, providing Dyna-Thread – M-COAT with the same life expectancy as Sch-40. With outstanding hydraulic capabilities, Dyna-Thread – M-COAT is a more widely accepted product substitution than lightwall threadable pipe when Sch-40 is specified. Dyna-Thread – M-COAT’s inside diameter is up to 3.6% larger than Sch-40 and provides improved hydraulics. When used in combination with Dyna-Flow pipe, down sizing of pipe and related components often occurs, thereby reducing costs. The consistent quality of steel used to make Dyna-Thread – M-COAT facilitates smooth threading and lower maintenance costs. Increased strength and lighter weight allows Dyna-Thread – M-COAT to reduce installation fatigue and makes it ideal for retro-fit applications. Dyna-Thread® – M-COAT ® Full Line Schedule 40 Replacement Customer Service (800) 882-5543 Fax: (800) 659-7730 www.alliedtube-sprinkler.com • 16100 S Lathrop Ave. • 11350 Norcom Rd. • 2525 N 27th Ave. Harvey, IL 60426 Philadelphia, PA 19154 Phoenix, AZ 85009 ©2013 Atkore International, Inc. All Rights Reserved. STP-S3-3M-1301 Dyna-Thread – M-COAT NPS Nominal I.D.Wt.Wt. (H20 Filled)CRR CRR In; mm In; mm Lbs/Ft; kg/m Lbs/Ft; kg/m Unthreaded Threaded 1”1.080 1.330 1.75 11.39 1.00 25 27.4 2.0 2.60 –– 1¼”1.408 1.870 2.54 9.50 1.00 32 35.8 2.8 3.78 –– 1½”1.639 2.290 3.22 9.14 1.00 40 41.6 3.4 4.79 –– 2”2.104 3.050 4.57 8.41 1.00 50 53.4 4.5 6.80 –– ** Must be ordered in 10 bundle increments Eddythread 40 A Lightweight Schedule 40 Replacement Pipe That Has a Corrosion Resistance Ratio of 1.0 Bull Moose Tube Company has been making pipe for a long time and is recognized as a producer of quality pipe products. Eddythread 40 is designed with the same thoroughness as our other fine pipe products and now our customers have an option to buy a carefully designed replacement for Schedule 40 that: • Has a Corrosion Resistance Ratio of 1.0 • Has a Pressure Rating of 300 psi • Is Lighter Weight Than Schedule 40 • Is Approved by Factory Mutual and Listed by Underwriters Laboratories • Is Produced in Accordance to ASTM A-135 and A-795 • Can be Used With Standard Schedule 40 Threaded Fittings, Couplings and Valves • Is Produced From Steel With Excellent Properties of Strength and Threadability • Can be Used in Wet, Dry, Preaction, and Deluge Type Sprinkler Systems* • Offers Lower Freight Costs EDDYTHREAD 40 SPECIFICATIONS NOMINAL PIPE SIZE (in) WEIGHT (lbs/ft) I.D. (in) BUNDLE SIZE 1 1.461 1.083 70 1 1/4 2.070 1.418 51 1 1/2 2.547 1.654 44 2 3.308 2.123 30 CORROSION RESISTANCE RATIOS NOMINAL PIPE SIZE (in) SCHEDULE 40 EDDYTHREAD 40 1 1.00 1.00 1 1/4 1.00 1.00 1 1/2 1.00 1.00 2 1.00 1.00 * Eddythread 40 can be hot dipped galvanized to meet FM's requirement for dry systems A company 1819 Clarkson Road Chesterfield, MO 63017 (800) 325-4467 FAX: (636) 537-2645 www.bullmoosetube.com e-mail:sales@bullmoosetube.com For additional information, contact your salesperson today at (800) 325-4467 or (636) 537-2600 in the USA, or from Canada call (800) 882-4666 All information contained herein is accurate as known at the time of publication. Bull Moose Tube reserves the right to change product specifications without notice and without incurring obligation. 8/08 Mission Who We Are Press Room CDA Offices Membership Member Login Architecture Automotive Electrical Building Wire Energy Efficiency Power Quality Tube, Pipe & Fittings Fuel Gas Industrial Marine Machined Products Telecommunications Copper Compounds Antimicrobial Copper Alloy Surfaces Find Suppliers Of Copper Copper Data Center Standards & Properties Applications Directory Market Data Publications List Copper Topics Home > Applications > Tube, Pipe & Fittings > Technical References > Copper Tube Handbook > Table of Contents > Index of Tables > Table 2c - Type M Tube Copper Tube Handbook: Table 2c - Type M Tube Dimensions and Physical Characteristics of Copper Tube: TYPE M Nominalorstandard size, inches Nominal dimensions, inches Calculated values (based on nominal dimensions) Outside diameter Inside diameter Wall thickness Cross sectional area of bore, sq. inches Weight of tube only, pounds per linear ft. Weightof tube & water pounds per linear ft. Contents of tubeper linear ft Cu ft.Gal. 3/8 .500 .450 .025 .159 .145 .214 .00110 .00826 1/2 .625 .569 .028 .254 .204 .314 .00176 .0132 3/4 .875 .811 .032 .517 .328 .551 .00359 .0269 1 1.125 1.055 .035 .874 .465 .843 .00607 .0454 1-1/4 1.375 1.291 .042 1.31 .682 1.25 .00910 .0681 1-1/2 1.625 1.527 .049 1.83 .940 1.73 .0127 .0951 2 2.125 2.009 .058 3.17 1.46 2.83 .0220 .165 2-1/2 2.625 2.495 .065 4.89 2.03 4.14 .0340 .254 3 3.125 2.981 .072 6.98 2.68 5.70 .0485 .363 3-1/2 3.625 3.459 .083 9.40 3.58 7.64 .0653 .488 4 4.125 3.935 .095 12.2 4.66 9.83 .0847 .634 5 5.125 4.907 .109 18.9 6.66 14.8 .131 .982 6 6.125 5.881 .122 27.2 8.92 20.7 .189 1.41 8 8.125 7.785 .170 47.6 16.5 37.1 .331 2.47 10 10.125 9.701 .212 73.9 25.6 57.5 .513 3.84 12 12.125 11.617 .254 106 36.7 82.5 .736 5.51 Copper TubeHandbook Plumbing Site Menu Table of Contents provides a view of the full contents of this publication and the links to go to specific sections of this handbook. The entire Copper Tube Handbook can be downloaded in pdf format [7 MB]. CDA Tube, Pipe and Fittings Council members: Applications: Tube, Pipe & Fittings: Copper Tube Handbook: Table 2c - Type M Tube http://www.copper.org/applications/plumbing/techref/cth/tables/cth_table2c.htm (1 of 2)2/17/2006 1:57:15 AM Project InformatIon:aPProval StamP: Project: Date:Phone: Architect / Engineer: Contractor: Address: Notes 1: Notes 2: Rev. 03.03.06-000 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvilstar.com or contact your local AnvilStar representative Submittal Sheet SPF Cast & Ductile Iron Fittings ® Material SpecificationS Ductile iron threaded fittings are UL & ULC Listed & Factory Mutual Approved for 500 psi service. Ductile iron per ASTM A536 Class 65-45-2. Dimensions conform to ASMe B6.3 Class 50. Threads are NPT per ANSI/ASMe B.20.. Notice: Ductile iron fittings have higher tensile strength than that of steel pipe. Therefore, over tightening can cause damage to pipe threads which may cause leakage. Ductile iron fittings should be tightened three turns beyond hand tight, but no more than four turns. 90° elbow Nominal Size Anvil ItemNumber Universal Number Max. Working Pressure Dimensions- In.(mm)Approx. Wt. Each A B In. (mm)PSI (kPa)In. (mm)In. (mm)Lbs. (kg) 1 840000004 DB90033 500 1.50 1.50 0.6220345038.10 38.10 0.28 11⁄4 840000012 DB90044 500 1.75 1.75 0.90 32 3450 44.45 44.45 0.41 11⁄2 840000020 DB90055 500 1.94 1.94 1.20 40 3450 49.276 49.276 0.54 2 840000038 DB90066 500 2.25 2.25 1.85 50 3450 57.15 57.15 0.84 B A 90° elbow Ductile Iron Project InformatIon:aPProval StamP: Project: Date:Phone: Architect / Engineer: Contractor: Address: Notes 1: Notes 2: Rev. 03.03.06-00 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvilstar.com or contact your local AnvilStar representative Submittal Sheet SPF Cast & Ductile Iron Fittings ® Material SpecificationS Ductile iron threaded fittings are UL & ULC Listed & Factory Mutual Approved for 500 psi service. Ductile iron per ASTM A536 Class 65-45-2. Dimensions conform to ASMe B6.3 Class 50. Threads are NPT per ANSI/ASMe B.20.. Notice: Ductile iron fittings have higher tensile strength than that of steel pipe. Therefore, over tightening can cause damage to pipe threads which may cause leakage. Ductile iron fittings should be tightened three turns beyond hand tight, but no more than four turns. 45° elbow Nominal Size Anvil Item Number Universal Number Max. Working Pressure Dimensions-Approx. Wt. Each A B In. (mm)PSI (kPa)In. (mm)In. (mm)Lbs. (kg) 1 840002133 DB45033 500 1.12 1.12 0.46 25 3450 28.44 28.44 0.2111⁄4 840002141 DB45044 500 1.29 1.29 0.73 32 3450 32.76 32.76 0.33 11⁄2 840002158 DB45055 500 1.43 1.43 0.9240345036.32 36.32 0.42 2 840002166 DB45066 500 1.68 1.68 1.50 50 3450 42.67 42.67 0.68 A B45° elbow Ductile Iron Project InformatIon:aPProval StamP: Project: Date:Phone: Architect / Engineer: Contractor: Address: Notes 1: Notes 2: Rev. 03.03.06-002 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvilstar.com or contact your local AnvilStar representative Submittal Sheet SPF Cast & Ductile Iron Fittings ® Material SpecificationS Ductile iron threaded fittings are UL & ULC Listed & Factory Mutual Approved for 500 psi service. Ductile iron per ASTM A536 Class 65-45-2. Dimensions conform to ASMe B6.3 Class 50. Threads are NPT per ANSI/ASMe B.20.. Notice: Ductile iron fittings have higher tensile strength than that of steel pipe. Therefore, over tightening can cause damage to pipe threads which may cause leakage. Ductile iron fittings should be tightened three turns beyond hand tight, but no more than four turns. reducing 90° elbow Nominal Size Anvil Item Number Universal Number Max. Working Pressure Dimensions Approx. Wt. Each A B In. (mm)PSI (kPa)In. (mm)In. (mm)Lbs. (kg) 1 x 1⁄2 840001036 DB90031 500 1.26 1.36 0.44 25 x 15 3450 32.00 34.54 0.201 x 3⁄4 840001044 DB90032 500 1.37 1.45 0.52 25 x 20 3450 34.79 36.83 0.24 11⁄4 x 1⁄2 840001051 DB90041 500 1.34 1.53 0.6432 x 15 34550 34.03 38.86 0.29 11⁄4 x 3⁄4 840001069 DB90042 500 1.45 1.62 0.72 32 x 20 3450 36.83 41.14 0.33 11⁄4 x 1 840001077 DB90043 500 1.58 1.67 0.75 32 x 25 3450 40.13 42.41 0.34 11⁄2 x 1 840001085 DB90053 500 1.65 1.80 0.92 40 x 25 3450 41.91 45.72 0.42 11⁄2 x 11⁄4 840001093 DB90054 500 1.82 1.88 1.08 40 x 32 3450 46.22 47.75 0.492 x 1⁄2 840001101 DB90061 500 1.49 1.88 1.08 50 x 15 3450 37.84 47.75 0.49 2 x 3⁄4 840001119 DB90062 500 1.60 1.97 1.2450 x 20 3450 40.64 50.03 0.56 2 x 1 840001127 DB90063 500 1.73 2.02 1.40 50 x 25 3450 43.94 51.30 0.64 2 x 11⁄4 840001135 DB90064 500 1.90 2.10 1.52 50 x 32 3450 48.26 53.34 0.70 2 x 11⁄2 840001143 DB90065 500 2.02 2.16 1.65 50 x 40 3450 51.30 54.86 0.75 A B reducing 90° elbow Ductile Iron Project InformatIon:aPProval StamP: Project: Date:Phone: Architect / Engineer: Contractor: Address: Notes 1: Notes 2: Rev. 03.03.06-003 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvilstar.com or contact your local AnvilStar representative Submittal Sheet SPF Cast & Ductile Iron Fittings ® Material SpecificationS Ductile iron threaded fittings are UL & ULC Listed & Factory Mutual Approved for 500 psi service. Ductile iron per ASTM A536 Class 65-45-2. Dimensions conform to ASMe B6.3 Class 50. Threads are NPT per ANSI/ASMe B.20.. Notice: Ductile iron fittings have higher tensile strength than that of steel pipe. Therefore, over tightening can cause damage to pipe threads which may cause leakage. Ductile iron fittings should be tightened three turns beyond hand tight, but no more than four turns. Straight tee Nominal Size Anvil Item Number Universal Number Max. Working Pressure Dimensions Approx. Wt. Each A B In. (mm)PSI (kPa)In. (mm)In. (mm)Lbs. (kg) 1 840003164 DT333 500 1.50 1.50 0.85 25 3450 38.10 38.10 0.39 11⁄4 840003172 DT444 500 1.75 1.75 1.22 32 3450 44.45 44.45 0.55 11⁄2 840003180 DT555 500 1.94 1.94 1.55 40 3450 49.27 49.27 0.70 2 840003198 DT666 500 2.25 2.25 2.45 50 3450 57.15 57.15 1.11 B AA Straight tee Ductile Iron Project InformatIon:aPProval StamP: Project: Date:Phone: Architect / Engineer: Contractor: Address: Notes 1: Notes 2: Rev. 03.03.06-004 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvilstar.com or contact your local AnvilStar representative Submittal Sheet SPF Cast & Ductile Iron Fittings ® Material SpecificationS Ductile iron threaded fittings are UL & ULC Listed & Factory Mutual Approved for 500 psi service. Ductile iron per ASTM A536 Class 65-45-2. Dimensions conform to ASMe B6.3 Class 50. Threads are NPT per ANSI/ASMe B.20.. Notice: Ductile iron fittings have higher tensile strength than that of steel pipe. Therefore, over tightening can cause damage to pipe threads which may cause leakage. Ductile iron fittings should be tightened three turns beyond hand tight, but no more than four turns. reducing tee Nominal Size Anvil Item Number Universal Number Max. Working Pressure Dimensions Approx. Wt. EachABC In. (mm)PSI (kPa)In. (mm)In. (mm)In. (mm)Lbs.(kg) 11⁄2 x 11⁄4 x 1 840004428 DT543 500 1.65 1.58 1.80 1.2540 x 32 x 25 3450 41.91 40.13 45.72 0.5711⁄2 x 11⁄4 x 2 840004436 DT546 500 2.16 2.10 2.02 1.9040 x 32 x 50 3450 54.86 53.34 51.30 0.8611⁄2 x 11⁄2 x 1⁄2 840004444 DT551 500 1.41 1.41 1.16 1.1540 x 40 x 15 3450 35.81 35.81 29.46 0.5211⁄2 x 11⁄2 x 3⁄4 840004451 DT552 500 1.52 1.52 1.75 1.2440 x 40 x 20 3450 38.61 38.61 44.45 0.5611⁄2 x 11⁄2 x 1 840004469 DT553 500 1.65 1.65 1.80 1.3040 x 40 x 25 3450 41.91 41.91 45.72 0.5911⁄2 x 11⁄2 x 11⁄4 840004477 DT554 500 1.82 1.82 1.88 1.4840 x 40 x 32 3450 46.23 46.23 47.75 0.6711⁄2 x 11⁄2 x 2 840004485 DT556 500 2.16 2.16 2.02 1.9840 x 40 x 50 3450 54.86 54.86 51.30 0.902 x 1 x 2 840004493 DT636 500 2.25 2.02 2.25 2.1550 x 25 x 50 3450 57.15 51.31 57.15 0.982 x 11⁄4 x 2 840004501 DT646 500 2.25 2.10 2.25 2.3050 x 32 x 50 3450 57.15 53.34 57.15 1.042 x 11⁄2 x 1⁄2 840004519 DT651 500 1.49 1.41 1.88 1.5050 x 40 x 15 3450 37.85 35.81 47.75 0.682 x 11⁄2 x 3⁄4 840004527 DT652 500 1.60 1.52 1.97 1.6250 x 40 x 20 3450 40.64 38.61 50.04 0.732 x 11⁄2 x 1 840004535 DT653 500 1.73 1.65 2.02 1.6450 x 40 x 25 3450 43.94 41.91 51.31 0.742 x 11⁄2 x 11⁄4 840004543 DT654 500 1.90 1.82 2.10 1.8050 x 40 x 32 3450 48.26 46.23 53.34 0.822 x 11⁄2 x 11⁄2 840004550 DT655 500 2.02 1.94 2.16 2.0050 x 40 x 40 3450 51.31 49.28 54.86 0.912 x 11⁄2 x 2 840004568 DT656 500 2.25 2.16 2.25 2.3550 x 40 x 50 3450 57.15 54.86 57.15 1.072 x 2 x 1⁄2 840004576 DT661 500 1.49 1.49 1.88 1.6050 x 50 x 15 3450 37.85 37.85 47.75 0.732 x 2 x 3⁄4 840004584 DT662 500 1.60 1.60 1.97 1.6850 x 50 x 20 3450 40.64 40.64 50.04 0.762 x 2 x 1 840004592 DT663 500 1.73 1.73 2.02 1.8550 x 50 x 25 3450 43.94 43.94 51.31 0.842 x 2 x 11⁄4 840004600 DT664 500 1.90 1.90 2.10 2.0450 x 50 x 32 3450 44.45 42.42 44.45 0.932 x 2 x 11⁄2 840004618 DT665 500 2.02 2.02 2.16 2.1850 x 50 x 40 3450 44.45 42.42 44.45 0.992 x 2 x 21⁄2 -DT667 500 2.60 2.60 2.39 3.6150 x 50 x 65 3450 44.45 42.42 44.45 1.6421⁄2 x 2 x 3⁄4 -DT762 500 1.74 1.60 2.32 2.2865 x 50 x 20 3450 44.45 42.42 44.45 1.03 reducing tee Nominal Size Anvil Item Number Universal Number Max. Working Pressure Dimensions Approx. Wt. EachABC In. (mm)PSI (kPa)In. (mm)In. (mm)In. (mm)Lbs.(kg) 1 x 1⁄2 x 1 840004196 DT313 500 1.50 1.36 1.50 0.6425 x 15 x 25 3450 38.10 34.54 38.10 0.291 x 3⁄4 x 1 840004204 DT323 500 1.50 1.45 1.50 0.7325 x 20 x 25 3450 38.10 36.83 38.10 0.331 x 1 x 1⁄2 840004212 DT331 500 1.26 1.26 1.36 0.7125 x 25 x 15 3450 32.00 32.00 34.54 0.321 x 1 x 3⁄4 840004220 DT332 500 1.37 1.37 1.45 0.7625 x 25 x 20 3450 34.80 34.80 36.83 0.341 x 1 x 11⁄4 840004238 DT334 500 1.67 1.67 1.58 0.9825 x 25 x 32 3450 42.41 42.41 40.13 0.441 x 1 x 11⁄2 840004246 DT335 500 1.80 1.80 1.65 1.1625 x 25 x 40 3450 45.72 45.72 41.91 0.5311⁄4 x 1 x 1⁄2 840004253 DT431 500 1.34 1.26 1.53 0.8232 x 25 x 15 3450 34.04 32.00 38.86 0.3711⁄4 x 1 x 3⁄4 840004261 DT432 500 1.45 1.37 1.62 0.9032 x 25 x 20 3450 36.83 34.80 41.15 0.4111⁄4 x 1 x 1 840004279 DT433 500 1.58 1.50 1.67 1.0032 x 25 x 25 3450 40.13 38.10 42.42 0.4511⁄4 x 1 x 11⁄4 840004287 DT434 500 1.75 1.67 1.75 1.0832 x 25 x 32 3450 44.45 42.42 44.45 0.4911⁄4 x 1 x 11⁄2 840004295 DT435 500 1.88 1.80 1.82 1.4232 x 25 x 40 3450 47.75 45.72 46.22 0.6411⁄4 x 11⁄4 x 1⁄2 840004303 DT441 500 1.34 1.34 1.53 0.8632 x 32 x 15 3450 34.04 34.04 38.86 0.3911⁄4 x 11⁄4 x 3⁄4 840004311 DT442 500 1.45 1.45 1.62 0.9232 x 32 x 20 3450 36.83 36.83 41.15 0.4211⁄4 x 11⁄4 x 1 840004329 DT443 500 1.58 1.58 1.67 0.9532 x 32 x 25 3450 40.13 40.13 42.42 0.4311⁄4 x 11⁄4 x 11⁄2 840004337 DT445 500 1.88 1.88 1.82 1.4532 x 32 x 40 3450 47.75 47.75 46.22 0.6611⁄4 x 11⁄4 x 2 840004345 DT446 500 2.10 2.10 1.90 1.7532 x 32 x 50 3450 53.34 53.34 48.26 0.7911⁄2 x 1 x 1⁄2 840004352 DT531 500 1.41 1.34 1.66 0.9540 x 25 x 15 3450 35.81 34.04 42.16 0.4311⁄2 x 1 x 3⁄4 840004360 DT532 500 1.52 1.37 1.75 1.1440 x 25 x 20 3450 38.61 34.80 44.45 0.5211⁄2 x 1 x 1 840004378 DT533 500 1.65 1.50 1.80 1.1740 x 25 x 25 3450 41.91 38.10 45.72 0.5311⁄2 x 1 x 11⁄4 840004386 DT534 500 1.82 1.67 1.88 1.3440 x 25 x 32 3450 46.23 42.42 47.75 0.6111⁄2 x 1 x 11⁄2 840004394 DT535 500 1.94 1.80 1.94 1.4540 x 25 x 40 3450 49.28 45.72 49.28 0.6611⁄2 x11⁄4 x 1⁄2 840004402 DT541 500 1.41 1.34 1.66 1.0540 x 32 x 15 3450 35.81 34.04 42.16 0.4811⁄2 x11⁄4 x 3⁄4 840004410 DT542 500 1.52 1.45 1.75 1.1540 x 32 x 20 3450 38.61 36.83 44.45 0.52 C BA reducing tee Ductile Iron Project InformatIon:aPProval StamP: Project: Date:Phone: Architect / Engineer: Contractor: Address: Notes 1: Notes 2: Rev. 03.03.06-005 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvilstar.com or contact your local AnvilStar representative Submittal Sheet SPF Cast & Ductile Iron Fittings ® Material SpecificationS Ductile iron threaded fittings are UL & ULC Listed & Factory Mutual Approved for 500 psi service. Ductile iron per ASTM A536 Class 65-45-2. Dimensions conform to ASMe B6.3 Class 50. Threads are NPT per ANSI/ASMe B.20.. Notice: Ductile iron fittings have higher tensile strength than that of steel pipe. Therefore, over tightening can cause damage to pipe threads which may cause leakage. Ductile iron fittings should be tightened three turns beyond hand tight, but no more than four turns. bull head tee Nominal Size Anvil Item Number Universal Number Max. Working Pressure Dimensions Approx. Wt. Each A B C In. (mm)PSI (kPa)In. (mm)In. (mm)In. (mm)Lbs. (kg) 1 x 1 x 11⁄4 840004238 DT334 500 1.67 1.67 1.58 0.9825 x 25 x 32 3450 42.41 42.41 40.13 0.44 1 x 1 x 11⁄2 840004246 DT335 500 1.80 1.80 1.65 1.16 25 x 25 x 40 3450 45.72 45.72 41.91 0.53 11⁄4 x 1 x 11⁄2 840004295 DT435 500 1.88 1.80 1.82 1.42 32 x 25 x 40 3450 47.75 45.72 46.22 0.64 11⁄4 x 11⁄4 x 11⁄2 840004337 DT445 500 1.88 1.88 1.82 1.45 32 x 32 x 40 3450 47.75 47.75 46.22 0.66 11⁄4 x 11⁄4 x 2 840004345 DT446 500 2.10 2.10 1.90 1.75 32 x 32 x 50 3450 53.34 53.34 48.26 0.7911⁄2 x 11⁄4 x 2 840004436 DT546 500 2.16 2.10 2.02 1.90 40 x 32 x 50 3450 54.86 53.34 51.30 0.86 11⁄2 x 11⁄2 x 2 840004485 DT556 500 2.16 2.16 2.02 1.9840 x 40 x 50 3450 54.86 54.86 51.30 0.90 C BA bull head tee Ductile Iron Project InformatIon:aPProval StamP: Project: Date:Phone: Architect / Engineer: Contractor: Address: Notes 1: Notes 2: Rev. 03.03.06-00 For the latest UL/ULC Listed and FM Approved pressure ratings, versus pipe schedule, go to www.anvilstar.com or contact your local AnvilStar representative Submittal Sheet SPF Cast & Ductile Iron Fittings ® Material SpecificationS Ductile iron threaded fittings are UL & ULC Listed & Factory Mutual Approved for 500 psi service. Ductile iron per ASTM A536 Class 65-45-2. Dimensions conform to ASMe B6.3 Class 50. Threads are NPT per ANSI/ASMe B.20.. Notice: Ductile iron fittings have higher tensile strength than that of steel pipe. Therefore, over tightening can cause damage to pipe threads which may cause leakage. Ductile iron fittings should be tightened three turns beyond hand tight, but no more than four turns. capS Nominal Size Anvil Item Number Universal Number Max. Working Pressure Dimensions A Approx. Wt. Each In. (mm)PSI (kPa)In. (mm)Lbs. (kg) 1 840005615 DCP003 500 1.16 0.32 25 3450 29.46 0.15 11⁄4 840005623 DCP004 500 1.28 0.43 32 3450 32.51 0.20 11⁄2 840005631 DCP005 500 1.33 0.60 40 3450 33.78 0.272840005649DCP006 500 1.45 0.91 50 3450 36.83 0.41 A cap Ductile Iron WROT CAST 101 Coupling Without Stop Wrot & Cast Pressure Fittings Couplings 4 Elkhart Products Corporation ** Cast Bronze Only *Factory Option—consult factory for price and delivery information. A A WROT CAST 101-R Coupling With Stop 4701-R Copper to Copper A C x C C x C C x C WROT CAST 100 Coupling With Stop Copper to Copper RD RPPA ETAD .LTAM ELACS ETAD .ONTRAPCPE DEIFICEPSESIWREHTOSSELNUSECNARELOTSELGNA.CED.LP3.CED.LP2.CED.LP1 )000.0()00.0()0.0(++060.+510.+500.1? PROCSTCUDORPTRAHKLEFOYTREPORPEHTSITNIRPSIHT.UTUMEHTHTIW,ESULAITNEDIFNOCROFDEHSINRUFSITI LAENNAMYNANIDESUEBTONLLIWTITAHTGNIDNATSREDNUROCSTCUDORPTRAHKLEFOSTSERETNIEHTOTLATNEMIRTED.PRIDNEPSTNETAPROSTNETAPETAROPROCNIYAMTNIRPSIHTGN.PROCSTCUDORPTRAHKLEYBDLEH ???????????????????????????????????????????????????????????????????????????????????? .ONTRAPCPE NOITPIRCSEDETADVER YB SECAFRUSLLADETONSATPECXESRRUBLLAEVOMER510.-500.SEGDEPRAHSLLAKAERB .FER NOITPIRCSED .VER .VER ??? .ONNCE 00221C-SNU 1:1 46703#CPU LLOR/WGNILPUOCMON-2/11 POTS 42-SR001 42-SR001 5002/13/5.VMAK J J 93149NSCJNCEREPD'VER6991/62/21J 42-SR001 1 TEEHS A C x C WROT CAST 100-RS Coupling With Roll Stop Copper to Copper Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/4 30896 50 1000 0.007 3/32 3/8 30898 50 1000 0.014 3/32 1/2 30900 100 1000 0.021 3/32 5/8 30902 25 500 0.040 3/32 3/4 30904 50 500 0.056 3/32 7/8 30906 10 200 0.084 3/32 1 30908 25 250 0.122 3/32 1 1/4 30910 20 200 0.144 3/32 1 1/2 30914 10 100 0.216 3/32 2 30916 5 50 0.391 3/32 2 1/2 30918 5 50 0.624 3/32 3 30920 5 40 0.909 3/32 3 1/2 30922 1 16 1.369 3/32 4 30924 2 16 1.904 3/32 5 30926 1 6 3.365 3/16 6 30928 1 6 5.262 3/16 8 30930 1 1 12.941 1/8 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/8 30944 50 1000 0.004 11/16 1/4 30948 50 1000 0.007 23/32 3/8 30950 50 1000 0.015 55/64 1/2 30952 100 1000 0.027 1 3/32 5/8 30954 25 500 0.041 1 21/64 3/4 30956 50 500 0.056 1 19/32 1 30960 25 250 0.121 1 29/32 1 1/4 30962 20 200 0.149 2 1/32 1 1/2 30964 10 100 0.213 2 17/64 2 30966 5 50 0.391 2 49/64 2 1/2 30968 5 50 0.616 3 1/32 3 30970 5 40 0.912 3 13/32 3 1/2 30972 1 16 1.352 3 29/32 4 30974 2 16 1.878 4 13/32 5 30976 1 6 3.365 5 1/2 6 30978 1 6 5.262 6 3/8 8 30980 1 1 12.941 8 1/4 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt.A 3/16 OD 30662 50 1000 0.002 1/16 5/16 OD 30672 50 1000 0.006 1/16 1/8 30666 50 1000 0.004 1/16 1/4 30678 50 1000 0.007 3/32 3/8 30686 50 1000 0.014 3/32 1/2 30694 100 1000 0.021 3/32 5/8 30702 25 500 0.040 3/32 3/4 30712 50 500 0.056 3/32 7/8 30724 10 200 0.084 3/32 1 30730 25 250 0.122 3/32 1 1/4 30746 20 200 0.144 3/32 1 1/2 30764 10 100 0.216 3/32 2 30782 5 50 0.391 3/32 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt.A 1/4 OD x 3/16 OD 30668 50 1000 0.004 3/32 5/16 OD x 1/4 OD 30674 50 1000 0.007 3/32 3/8 OD x 5/16 OD 30680 50 1000 0.008 3/32 1/4 x 1/8 30684 50 1000 0.008 5/32 3/8 x 1/4 30688 50 1000 0.017 3/16 3/8 x 1/8 30692 50 1000 0.019 1/4 1/2 x 3/8 30696 50 1000 0.024 5/32 1/2 x 1/4 30698 50 1000 0.025 1/4 1/2 x 1/8 30700 50 1000 0.027 23/64 5/8 x 1/2 30704 25 500 0.035 5/32 5/8 x 3/8 30706 25 500 0.033 7/32 5/8 x 1/4 30708 25 500 0.043 5/16 3/4 x 5/8 30714 50 500 0.057 3/16 Wrot & Cast Pressure Fittings Couplings & Unions ** Cast Bronze Only * Factory Option - consult factory for price and delvery information.Elkhart Products Corporation 5 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 3/4 x 1/2 30716 50 500 0.061 3/16 3/4 x 3/8 30718 25 500 0.054 21/64 3/4 x 1/4 30720 25 500 0.053 7/16 1 x 3/4 30734 25 250 0.098 13/32 1 x 5/8 30736 25 250 0.102 3/8 1 x 1/2 30738 25 250 0.104 7/16 1 x 3/8 30740 25 250 0.098 1/2 1 1/4 x 1 30748 10 100 0.152 5/16 1 1/4 x 3/4 30752 10 100 0.134 15/32 1 1/4 x 1/2 30756 10 100 0.176 41/64 1 1/2 x 1 1/4 30766 10 100 0.220 11/32 1 1/2 x 1 30768 10 100 0.220 7/16 1 1/2 x 3/4 30772 10 100 0.218 21/32 1 1/2 x 1/2 30776 10 100 0.219 25/32 2 x 1 1/2 30784 10 100 0.366 13/32 2 x 1 1/4 30786 10 100 0.393 21/32 2 x 1 30788 10 100 0.383 25/32 2 x 3/4 30790 10 100 0.408 1 2 x 1/2 30792 10 100 0.420 1 1/8 2 1/2 x 2 30800 5 50 0.639 15/32 2 1/2 x 1 1/2 30802 5 50 0.666 7/8 2 1/2 x 1 1/4 30804 5 50 0.664 15/16 2 1/2 x 1 30806 5 50 0.691 1 1/8 3 x 2 1/2 30816 2 20 0.946 1/2 3 x 2 30818 2 20 0.991 13/16 3 x 1 1/2 30820 2 20 1.106 1 5/32 **3 x 1 1/4 34710 - 40 1.345 - **3 x 1 34712 -25 1.352 - 3 1/2 x 3 30832 1 16 1.426 1/2 4 x 3 1/2 30840 2 32 1.960 17/32 4 x 3 30842 2 32 1.940 7/8 4 x 2 1/2 30844 2 32 2.029 1 1/8 4 x 2 30846 2 32 2.192 1 1/2 5 x 4 30850 1 6 3.310 25/32 5 x 3 30852 1 6 3.199 1 3/16 5 x 2 1/2 30854 1 6 3.115 1 7/16 5 x 2 30856 1 6 2.932 1 11/16 6 x 5 30860 1 6 4.762 1/2 6 x 4 30862 1 6 4.689 1 3/16 6 x 3 30864 1 6 4.749 1 11/16 6 x 2 1/2 30866 1 6 4.665 2 1/16 6 x 2 30868 1 6 4.780 2 3/16 8 x 6 30872 1 1 10.957 1 1/8 8 x 5 30873 1 1 11.546 1 5/8 8 x 4 30874 1 1 11.696 2 1/4 8 x 3 30876 1 1 12.800 2 11/16 8 x 2 1/2 30878 1 1 13.770 3 1/16 8 x 2 30880 1 1 14.163 3 WROT CAST 101-R Coupling With Stop-cont. 4701-R Copper to Copper A C x C WROT CAST 102 Union 4733 Copper to Copper A C x C WROT CAST 110 Eccentric Coupling Copper to Copper Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 3/4 x 1/2 31042 25 250 0.060 3/8 1 x 3/4 31044 10 100 0.114 13/32 1 1/4 x 1 31046 10 100 0.162 1/2 1 1/4 x 3/4 31048 10 100 0.190 3/4 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/4 33576 25 500 0.114 13/32 3/8 33578 25 250 0.131 27/64 **3/8 37933 50 500 0.147 - 1/2 33580 25 250 0.113 1/2 **1/2 37934 25 250 0.216 - **5/8 37936 25 250 0.308 - 3/4 33582 20 200 0.261 21/32 **3/4 37937 25 150 0.313 - 1 33584 10 100 0.557 7/16 1 1/4 33585 5 50 0.698 7/16 1 1/2 33586 5 50 0.878 29/64 2 33587 2 20 1.499 15/32 **2 1/2 37947 - 10 3.250 - **3 37948 - 5 4.750 - A 6 Elkhart Products Corporation ** Cast Bronze Only *Factory Option—consult factory for price and delivery information. A A C x F C x M FTG. x F WROT CAST 103 Female Adapter 4703 Copper to Female N.P.T. WROT CAST 103-2 Female Street Adapter 4703-2 Fitting to Female N.P.T. WROT CAST 104 Male Adapter 4704 Copper to Male N.P.T. Wrot & Cast Pressure Fittings Adapters Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/8 30100 50 1000 0.029 7/16 1/4 30110 50 1000 0.031 15/32 3/8 30120 50 500 0.053 19/32 1/2 30130 50 500 0.093 7/8 3/4 30150 25 250 0.143 23/32 1 30160 20 200 0.226 31/32 1 1/4 30170 10 100 0.369 1 3/32 1 1/2 30180 10 100 0.404 1 5/32 2 30190 5 50 0.667 1 1/4 2 1/2 30200 2 20 1.228 1 1/2 ** 3 34252 - 12 2.400 - **4 34258 -12 3.820 - **5 34259 - 6 8.250 - ** 6 34263 - 4 12.000 - 1/8 x 1/4 30106 50 1000 0.033 1/2 1/4 x 1/2 30112 50 500 0.078 25/32 1/4 x 3/8 30114 50 1000 0.043 21/32 1/4 x 1/8 30116 50 1000 0.024 11/32 3/8 x 3/4 30122 25 250 0.121 3/4 3/8 x 1/2 30124 50 500 0.082 7/8 3/8 x 1/4 30126 50 1000 0.041 15/32 ** 1/2 x 1 34212 25 150 0.300 - 1/2 x 3/4 30134 25 250 0.121 29/32 1/2 x 3/8 30136 50 500 0.046 9/16 1/2 x 1/4 30138 50 500 0.044 15/32 5/8 x 3/4 30142 25 250 0.143 1 5/8 x 1/2 30144 25 250 0.102 3/4 ** 3/4 x 1 1/4 34218 10 50 0.515 - 3/4 x 1 30154 20 200 0.218 1 7/32 3/4 x 1/2 30156 25 250 0.085 19/32 ** 3/4 x 3/8 34222 25 250 0.170 - ** 1 x 1 1/2 34224 10 40 0.720 - 1 x 1 1/4 30164 10 100 0.299 1 7/32 1 x 3/4 30166 25 250 0.159 43/64 1 x 1/2 30168 10 100 0.239 11/16 ** 1 1/4 x 2 34229 5 50 0.980 - 1 1/4 x 1 1/2 30172 10 100 0.431 1 19/64 1 1/4 x 1 30174 10 100 0.238 55/64 **1 1/4 x 3/4 34233 -100 0.290 - 1 1/2 x 2 30182 5 50 0.678 1 7/16 1 1/2 x 1 1/4 30184 10 100 0.388 7/8 ** 1 1/2 x 1 34238 - 60 0.370 - 2 x 1 1/2 30192 5 50 0.730 1 3/16 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/4 30224 50 1000 0.030 29/32 3/8 30230 50 1000 0.049 1 1/16 1/2 30236 50 500 0.084 1 3/8 3/4 30242 25 250 0.143 1 11/16 1 30248 20 200 0.214 1 31/32 1 1/4 30254 10 100 0.324 2 5/32 1 1/2 30260 10 100 0.437 2 7/16 2 30266 5 50 0.641 2 19/32 **2 1/2 34297 - 25 1.740 - ** 3 34298 - 20 2.470 - 1/2 x 3/8 30238 50 500 0.062 1 1/8 1/2 x 1/4 30240 50 500 0.041 59/64 **3/4 x 1/2 34284 25 225 0.147 - ** 1 x 3/4 34287 25 100 0.414 - *** 1 x 1/2 34288 25 250 0.153 - Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A *1/8 30280 50 1000 0.019 13/32 1/4 30290 50 1000 0.027 15/32 3/8 30300 50 500 0.041 7/8 1/2 30310 50 500 0.064 19/32 3/4 30330 25 250 0.119 13/16 1 30342 20 200 0.170 27/32 1 1/4 30354 10 100 0.317 15/16 1 1/2 30368 10 100 0.462 7/8 2 30378 5 50 0.675 31/32 2 1/2 30388 4 40 1.267 1 21/32 3 30400 2 20 1.520 1 7/32 4 30410 1 16 2.262 1 9/32 **5 34374 - 5 8.600 - **6 34377 - 4 10.730 - 1/8 x 3/8 30282 50 1000 0.040 3/4 Wrot & Cast Pressure Fittings Adapters & Elbows ** Cast Bronze Only *Factory Option—consult factory for price and delivery information.Elkhart Products Corporation 7 FTG. x M A WROT CAST 104-2 Male Street Adapter 4704-2 Fitting to Male N.P.T. WROT CAST 104 Male Adapter-cont. 4704 Copper to Male N.P.T. WROT CAST 104-2 Male Street Adapter-cont. 4704-2 Fitting to Male N.P.T. A A FTG. x FTG. WROT CAST 105-C 90° Street Elbow-Close Ruff Fitting to Fitting Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/4 30424 50 1000 0.033 1 1/6 3/8 30430 50 1000 0.049 1 3/16 1/2 30436 50 500 0.074 1 7/16 3/4 30444 25 250 0.143 1 27/32 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/8 31450 25 500 0.008 5/8 1/4 31452 25 500 0.013 27/32 3/8 31456 25 500 0.029 15/16 1/2 31460 25 500 0.044 1 1/32 5/8 31464 10 200 0.073 1 1/4 3/4 31468 25 250 0.086 1 13/32 1 31472 10 100 0.166 1 21/32 1 1/4 31476 5 50 0.269 1 29/32 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/8 x 1/4 30284 50 1000 0.033 7/16 1/4 x 1/2 30292 50 500 0.069 7/8 1/4 x 3/8 30294 50 1000 0.060 63/64 1/4 x 1/8 30296 50 1000 0.014 17/32 3/8 x 3/4 30302 25 250 0.143 1 11/32 3/8 x 1/2 30304 50 500 0.072 15/16 3/8 x 1/4 30306 50 1000 0.039 5/8 1/2 x 1 30314 20 200 0.240 1 1/2 x 3/4 30316 25 250 0.135 13/16 1/2 x 3/8 30318 50 500 0.053 47/64 1/2 x 1/4 30320 50 500 0.059 5/8 5/8 x 3/4 30324 25 250 0.129 1 1/8 5/8 x 1/2 30326 25 500 0.075 11/16 ** 3/4 x 1 1/2 34329 5 50 0.596 - ** 3/4 x 1 1/4 34330 - 120 0.375 - 3/4 x 1 30336 20 200 0.234 7/8 3/4 x 1/2 30338 25 250 0.106 53/64 1 x 1 1/2 30344 10 100 0.544 1 29/32 1 x 1 1/4 30346 10 100 0.399 1 21/32 1 x 3/4 30348 25 250 0.206 1 3/32 1 x 1/2 30350 25 250 0.176 31/32 **1 1/4 x 2 34345 - 40 0.880 - 1 1/4 x 1 1/2 30358 10 100 0.523 1 45/64 1 1/4 x 1 30360 10 100 0.304 1 1/4 1 1/4 x 3/4 30362 10 100 0.273 1 1 1/2 x 2 30370 5 50 0.772 1 25/32 1 1/2 x 1 1/4 30372 10 100 0.386 1 27/64 1 1/2 x 1 30374 10 100 0.435 1 9/64 ** 2 x 2 1/2 34357 - 25 1.565 - 2 x 1 1/2 30380 5 50 0.650 1 23/64 2 x 1 1/4 30382 5 50 0.631 1 3/4 2 1/2 x 2 30390 5 50 0.931 1 9/64 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1 30452 20 200 0.232 2 5/32 1 1/4 30460 10 100 0.444 2 1/2 1 1/2 30470 10 100 0.508 2 13/16 2 30480 5 50 0.749 2 13/16 **2 1/2 34417 - 25 1.550 - ** 3 34422 - 20 2.280 - 1/2 x 3/4 30438 25 250 0.153 - 1/2 x 3/8 30440 50 500 0.045 - 3/4 x 1/2 30448 25 250 0.093 1 23/32 Wrot & Cast Pressure Fittings Elbows 8 Elkhart Products Corporation ** Cast Bronze Only *Factory Option—consult factory for price and delivery information. WROT CAST 106-2 45° Street Elbow Fitting to Copper B A A B FTG. x C C x C WROT CAST 107-C 90° Elbow-Close Ruff 4707 Copper to Copper A A C x C WROT CAST 106 45° Elbow Copper to Copper A A FTG. x FTG. WROT CAST 105-L 90° Street Elbow-Long Turn Fitting to Fitting Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt.A B 1/8 31260 50 1000 0.008 3/8 3/8 1/4 31262 50 1000 0.012 3/8 3/8 3/8 31266 50 1000 0.026 13/32 13/32 1/2 31272 100 1000 0.044 25/64 25/64 5/8 31280 25 250 0.069 17/32 17/32 3/4 31288 50 500 0.096 9/16 9/16 1 31296 20 200 0.208 47/64 47/64 1 1/4 31306 25 200 0.259 15/16 15/16 1 1/2 31314 20 120 0.371 1 11/64 1 11/64 2 31322 10 80 0.805 1 29/64 1 29/64 2 1/2 31330 5 40 1.180 1 21/32 1 21/32 3 31338 3 24 1.920 1 61/64 1 61/64 3 1/2 31346 1 8 2.728 2 7/32 2 7/32 4 31352 1 8 4.557 2 17/32 2 17/32 5 31360 1 1 8.586 3 1/8 3 1/8 6 31368 1 1 15.200 3 13/16 3 13/16 8 31371 1 1 37.000 5 1/8 5 1/8 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/8 31082 50 1000 0.006 1/8 1/4 31086 50 1000 0.013 15/64 3/8 31090 50 1000 0.024 1/4 1/2 31096 100 1000 0.034 17/64 5/8 31102 25 250 0.056 5/16 3/4 31106 50 500 0.076 3/8 1 31120 25 250 0.137 13/32 1 1/4 31128 25 200 0.229 33/64 1 1/2 31134 20 160 0.343 19/32 2 31140 10 80 0.625 25/32 2 1/2 31148 5 40 0.970 7/8 3 31156 3 24 1.460 63/64 3 1/2 31162 1 16 2.180 1 5/32 4 31168 1 8 3.800 1 11/64 5 31170 1 6 6.564 1 13/32 6 31172 1 1 11.200 1 11/16 8 31174 1 1 27.900 2 1/4 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 3/8 31896 25 500 0.033 1 3/16 1/2 31902 25 250 0.057 1 7/16 3/4 31914 25 250 0.138 2 1 31926 10 100 0.251 2 15/32 1 1/4 31932 5 50 0.381 2 29/32 1 1/2 31938 5 50 0.563 3 5/16 2 31944 5 40 1.156 4 3/8 Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 1/4 31186 50 1000 0.013 15/64 41/64 3/8 31190 50 1000 0.024 9/32 23/32 1/2 31194 100 1000 0.035 5/16 25/32 5/8 31198 25 250 0.059 5/16 1 3/4 31202 50 500 0.076 13/32 1 3/16 1 31206 25 250 0.134 7/16 1 7/16 1 1/4 31212 25 200 0.229 17/32 1 9/16 1 1/2 31216 20 160 0.343 19/32 1 3/4 2 31220 10 80 0.625 11/16 2 3/32 2 1/2 31224 5 40 0.965 29/32 2 7/16 3 31228 3 24 1.470 1 2 11/16 *3 1/2 31232 1 16 2.100 1 5/32 3 4 31236 1 8 3.340 1 9/32 3 1/2 Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 1/2 31676 50 500 0.055 55/64 55/64 5/8 31684 25 250 0.087 1 1/16 1 1/16 3/4 31692 25 250 0.123 1 5/32 1 5/32 7/8 31702 10 100 0.210 1 15/32 1 15/32 1 31708 10 100 0.270 1 29/64 1 29/64 1 1/4 31720 10 80 0.381 1 7/8 1 7/8 1 1/2 31730 10 80 0.563 2 3/16 2 3/16 2 31740 5 30 1.156 3 3 2 1/2 31750 1 10 1.980 3 3/16 3 3/16 3 31756 1 8 3.320 4 5/8 4 5/8 3 1/2 31762 1 1 4.850 5 1/4 5 1/4 4 31770 1 1 7.400 5 7/8 5 7/8 Wrot & Cast Pressure Fittings Elbows ** Cast Bronze Only *Factory Option—consult factory for price and delivery information.Elkhart Products Corporation 9 A B A B B A FTG. x C C x C FTG. x C WROT CAST 107-C-2 90° Street Elbow -Close Ruff Fitting to Copper WROT CAST 107-L 90° Elbow-Long Turn-cont. Copper to Copper WROT CAST 107-L-2 90° Street Elbow-Long Turn Fitting to Copper WROT CAST 107-L 90° Elbow-Long Turn Copper to Copper Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 1/8 31390 50 1000 0.006 3/8 49/64 1/4 31392 50 1000 0.012 3/8 3/4 3/8 31396 50 1000 0.027 13/32 15/16 1/2 31400 100 1000 0.042 29/64 1 1/32 5/8 31404 25 250 0.061 17/32 1 7/32 3/4 31408 50 500 0.103 19/32 1 13/32 1 31412 20 200 0.195 21/32 1 21/32 1 1/4 31416 25 200 0.259 7/8 1 29/32 1 1/2 31420 20 120 0.392 1 11/64 2 3/8 2 31424 10 80 0.805 1 29/64 2 27/32 2 1/2 31428 5 40 1.187 1 3/4 3 21/64 3 31432 3 24 1.960 2 3 25/32 3 1/2 31436 1 8 2.798 2 15/64 4 15/64 4 31440 1 8 4.460 2 19/32 4 13/16 Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 1/8 31790 50 1000 0.008 1/2 7/8 1/4 31792 50 1000 0.019 23/64 1 1/16 3/8 31796 50 500 0.032 23/32 1 7/32 1/2 31802 50 500 0.055 55/64 1 7/16 5/8 31810 25 250 0.087 1 1/16 1 27/32 3/4 31816 25 250 0.139 1 1/8 2 1/16 1 31830 10 100 0.269 1 13/32 2 9/16 1 1/4 31838 10 80 0.381 1 7/8 2 29/32 1 1/2 31844 10 80 0.563 2 3/16 3 5/16 2 31850 5 30 1.156 2 31/32 4 3/8 2 1/2 31856 1 10 1.963 3 3/16 4 23/32 3 31862 1 8 3.300 4 5/8 6 11/32 3 1/2 31868 1 8 3.850 4 5 31/32 4 31874 1 1 5.890 4 29/64 6 23/32 Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 3/16 OD 31662 50 1000 0.007 5/16 5/16 5/16 OD 31666 50 1000 0.013 9/16 9/16 1/8 31664 50 1000 0.083 1/2 1/2 1/4 31668 50 1000 0.019 3/4 3/4 3/8 31672 50 500 0.033 23/32 23/32 Wrot & Cast Pressure Fittings Elbows 10 Elkhart Products Corporation ** Cast Bronze Only * Factory Option-consult factory for price and delivery information. FTG. x C C x C WROT CAST 107-R 90°Reducer Elbow Copper to Copper WROT CAST 107-CR 90° Reducer Elbow-Close Ruff 4707 Copper to Copper A B C x C WROT CAST 107-MT 90° Elbow-Medium Turn Copper to Copper A B FTG. x C WROT CAST 107-MT-2 90° Street Elbow -Medium Turn Fitting to Copper Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 3/8 x 1/4 31268 50 1000 0.027 5/8 39/64 1/2 x 3/8 31274 50 500 0.041 43/64 5/8 1/2 x 1/4 31276 50 500 0.034 11/16 43/64 5/8 x 1/2 31282 25 250 0.077 31/32 7/8 3/4 x 1/2 31290 50 500 0.085 5/8 15/32 1 x 3/4 31298 25 250 0.146 3/4 19/32 1 x 1/2 31300 25 250 0.129 1 1/8 7/8 1 1/4 x 1 31308 10 100 0.229 7/8 11/16 ** 1 1/4 x 3/4 35212 15 90 0.338 - - **1 1/4 x 1/2 35214 20 120 0.280 -- 1 1/2 x 1 1/4 31316 10 100 0.338 1 9/64 55/64 ** 1 1/2 x 1 35218 - 60 0.540 - - ** 1 1/2 x 3/4 35220 - 72 0.455 - - ** 1 1/2 x 1/2 35222 12 72 0.380 - - 2 x 1 1/2 31324 5 40 0.602 1 1/2 1 13/64 **2 x 1 1/4 35226 - 25 0.880 - - ** 2 x 1 35228 - 30 0.780 - - ** 2 x 3/4 35229 - 30 0.660 - - 2 1/2 x 2 31332 5 40 1.128 1 7/8 1 1/2 3 x 2 1/2 31340 3 24 1.598 2 3/32 1 3/4 ** 3 x 2 35242 - 20 2.753 - - 4 x 3 31354 1 8 3.313 2 11/16 2 * 5 x 4 31362 1 6 6.542 3 13/32 2 17/32 * 6 x 4 31370 1 6 8.091 3 7/8 2 17/32 Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 3/8 x 1/4 31674 50 1000 0.027 39/64 5/8 1/2 x 3/8 31678 50 500 0.042 5/8 43/64 5/8 x 1/2 31686 25 250 0.077 7/8 31/32 3/4 x 3/8 31698 50 500 0.073 11/16 27/32 3/4 x 1/2 31696 50 500 0.086 7/8 7/8 3/4 x 5/8 31694 25 250 0.113 1 1/16 1 5/32 1 x 3/4 31710 25 250 0.170 1 9/64 1 1/4 1 1/2 x 1 31734 5 50 0.350 1 13/32 1 11/16 1 1/2 x 1 1/4 31732 5 50 0.480 2 2 1/4 2 x 1 1/2 31742 5 40 0.754 2 3/16 2 5/16 Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 1/8 31560 50 1000 0.010 3/8 3/4 1/4 31562 50 1000 0.017 3/8 3/4 3/8 31566 50 1000 0.044 1/2 15/16 1/2 31572 50 500 0.066 19/32 1 3/16 5/8 31578 25 250 0.104 7/8 1 1/2 3/4 31584 25 250 0.146 13/16 1 5/8 1 31590 10 100 0.271 1 1/16 2 1/32 Nominal Size Part Box Master Approx. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B 1/8 31510 50 1000 0.010 3/8 3/8 1/4 31512 50 1000 0.016 3/8 3/8 3/8 31516 50 1000 0.043 1/2 1/2 1/2 31522 50 500 0.068 19/32 19/32 5/8 31530 25 250 0.109 7/8 7/8 3/4 31536 25 250 0.141 13/16 13/16 1 31542 10 100 0.252 1 1 ** Cast Bronze Only *Factory Option—consult factory for price and delivery information.Elkhart Products Corporation 11 Wrot & Cast Pressure Fittings Tees WROT CAST 111 Tee-cont. 4711 Copper to Copper to Copper B C AC x C x C WROT CAST 111 Tee 4711 Copper to Copper to Copper Nominal Size Part Box Master Approx. Dim. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B C 1/2 x 3/8 x 1/2 32716 50 500 0.063 3/8 17/32 11/32 1/2 x 3/8 x 3/8 32718 50 500 0.064 5/16 1/2 13/32 1/2 x 1/4 x 1/2 32724 50 500 0.063 3/8 21/32 11/32 1/2 x 1/4 x 1/4 32728 50 500 0.064 9/32 5/8 13/32 5/8 x 5/8 x 3/4 32736 25 250 0.170 11/16 11/16 17/32 5/8 x 5/8 x 1/2 32738 25 250 0.107 27/64 27/64 1/2 5/8 x 5/8 x 3/8 32740 25 250 0.107 27/64 27/64 21/32 5/8 x 5/8 x 1/4 32742 25 250 0.107 27/64 27/64 23/32 5/8 x 1/2 x 1/2 32748 25 250 0.107 27/64 5/8 1/2 3/4 x 3/4 x 1 32770 10 100 0.202 3/4 3/4 17/32 * 3/4 x 3/4 x 5/8 32772 25 250 0.153 1/2 1/2 3/4 3/4 x 3/4 x 1/2 32774 25 250 0.112 25/64 25/64 19/32 3/4 x 3/4 x 3/8 32776 25 250 0.130 25/64 25/64 11/16 3/4 x 3/4 x 1/4 32778 25 250 0.135 25/64 25/64 3/4 * 3/4 x 5/8 x 5/8 32786 25 250 0.150 1/2 11/16 3/4 3/4 x 1/2 x 3/4 32790 25 250 0.144 1/2 25/32 17/32 3/4 x 1/2 x 1/2 32794 25 250 0.109 25/64 5/8 19/32 * 3/4 x 1/2 x 3/8 32796 25 250 0.137 25/64 5/8 11/16 3/4 x 1/2 x 1/4 32798 25 250 0.140 25/64 5/8 3/4 * 3/4 x 3/8 x 3/4 32802 25 250 0.159 1/2 29/32 17/32 * 3/4 x 3/8 x 3/8 32806 25 250 0.132 25/64 23/32 11/16 1 x 1 x 1 1/2 32820 5 50 0.680 1 1/4 1 1/4 1 5/32 1 x 1 x 1 1/4 32822 5 50 0.405 1 5/32 1 5/32 31/32 1 x 1 x 3/4 32824 10 100 0.220 1/2 1/2 5/8 * 1 x 1 x 5/8 32826 10 100 0.319 1/2 1/2 15/16 1 x 1 x 1/2 32828 10 100 0.183 23/64 23/64 11/16 1 x 1 x 3/8 32830 10 100 0.183 23/64 23/64 13/16 1 x 3/4 x 1 32836 10 100 0.290 21/32 53/64 21/32 1 x 3/4 x 3/4 32838 10 100 0.220 1/2 11/16 5/8 1 x 3/4 x 1/2 32842 10 100 0.183 23/64 9/16 11/16 * 1 x 3/4 x 3/8 32844 10 100 0.270 23/64 9/16 13/16 1 x 1/2 x 1 32856 10 100 0.290 21/32 5/64 21/32 1 x 1/2 x 3/4 32858 10 100 0.220 1/2 15/16 5/8 1 x 1/2 x 1/2 32860 10 100 0.185 23/64 13/16 11/16 1 1/4 x 1 1/4 x 2 32868 5 40 1.352 1 3/4 1 3/4 1 3/8 1 1/4 x 1 1/4 x 1 1/2 32870 5 50 0.680 1 3/16 1 3/16 1 5/32 1 1/4 x 1 1/4 x 1 32872 5 50 0.348 17/32 17/32 25/32 1 1/4 x 1 1/4 x 3/4 32874 5 50 0.314 7/16 7/16 3/4 1 1/4 x 1 1/4 x 1/2 32876 5 50 0.259 19/64 19/64 11/16 1 1/4 x 1 x 1 1/4 32882 5 50 0.405 7/8 7/8 25/32 1 1/4 x 1 x 1 32884 5 50 0.391 3/4 3/4 25/32 1 1/4 x 1 x 3/4 32886 5 50 0.297 5/8 5/8 25/32 1 1/4 x 1 x 1/2 32888 5 50 0.267 1/2 1/2 25/32 1 1/4 x 3/4 x 1 1/4 32894 5 50 0.405 7/8 7/8 25/32 1 1/4 x 3/4 x 1 32896 5 50 0.391 3/4 3/4 25/32 1 1/4 x 3/4 x 3/4 32898 5 50 0.297 5/8 5/8 25/32 1 1/4 x 3/4 x 1/2 32900 5 50 0.267 1/2 1/2 25/32 1 1/4 x 1/2 x 1 1/4 32904 5 50 0.405 7/8 7/8 25/32 ** 1 1/4 x 1/2 x 1 36780 12 72 0.470 - - - ** 1 1/2 x 1/2 x 1/2 36783 5 50 0.500 - - - 1 1/2 x 1 1/2 x 2 32912 5 50 1.352 1 37/64 1 37/64 1 3/8 1 1/2 x 1 1/2 x 1 1/4 32914 5 50 0.457 11/16 11/16 13/16 1 1/2 x 1 1/2 x 1 32916 5 50 0.376 9/16 9/16 13/16 1 1/2 x 1 1/2 x 3/4 32918 5 50 0.332 7/16 7/16 13/16 1 1/2 x 1 1/2 x 1/2 32920 5 50 0.296 21/64 21/64 29/32 1 1/2 x 1 1/4 x 1 1/2 32924 5 50 0.680 1 7/32 1 3/16 1 7/32 Nominal Size Part Box Master Approx. Dim. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B C 1/8 32606 50 1000 0.016 13/64 13/64 7/32 3/16 OD 32602 50 1000 0.009 3/16 3/16 3/16 5/16 OD 32622 50 1000 0.020 7/32 7/32 9/32 1/4 32640 50 1000 0.028 17/64 17/64 1/4 3/8 32668 50 500 0.045 5/16 5/16 3/8 1/2 32700 50 500 0.059 21/64 21/64 11/32 5/8 32732 25 250 0.110 7/16 7/16 1/2 3/4 32768 25 250 0.144 1/2 1/2 17/32 1 32818 10 100 0.239 41/64 41/64 19/32 1 1/4 32866 5 50 0.397 41/64 41/64 41/64 1 1/2 32910 5 50 0.540 13/16 13/16 13/16 2 32970 5 40 1.082 1 1/16 1 1/16 1 15/64 2 1/2 33030 1 10 1.967 1 21/32 1 21/32 1 11/16 3 33124 1 10 2.632 1 7/8 1 7/8 1 11/16 3 1/2 33250 1 8 4.167 2 5/32 2 5/32 2 1/4 4 33258 1 8 5.210 2 13/32 2 13/32 2 9/16 *5 33400 1 1 7.998 2 37/64 2 37/64 2 29/32 *6 33420 1 1 12.613 3 1/8 3 1/8 3 11/16 *8 33454 1 1 32.086 4 1/16 4 1/16 4 3/4 1/4 x 1/4 x 1/8 OD 32614 50 1000 0.016 5/16 5/16 7/32 1/4 x 1/4 x 1/4 OD 33492 50 1000 0.016 13/64 13/64 7/32 1/4 x 1/4 x 5/16 OD 32608 50 1000 0.020 17/64 17/64 9/32 5/16 x 5/16 x 1/4 OD 32626 50 1000 0.020 7/32 7/32 11/32 5/16 x 1/4 x 5/16 OD 32628 50 1000 0.020 7/32 11/32 9/32 5/16 x 1/4 x 1/4 OD 32630 50 1000 0.020 7/32 11/32 11/32 *3/8 x 3/8 x 3/16 OD 32650 50 1000 0.028 17/64 17/64 7/16 3/8 x 1/4 x 5/16 OD 32658 50 1000 0.028 17/64 13/32 11/32 1/8 x 1/8 x 1/4 32610 50 1000 0.028 13/32 13/32 1/4 1/4 x 1/4 x 1/2 32642 50 500 0.063 21/32 21/32 11/32 1/4 x 1/4 x 3/8 32644 50 500 0.045 15/32 15/32 3/8 1/4 x 1/4 x 1/8 32648 50 1000 0.028 17/64 17/64 13/32 1/4 x 1/8 x 1/4 32656 50 1000 0.028 17/64 13/32 1/4 1/4 x 1/8 x 1/8 32664 50 1000 0.028 17/64 13/32 13/32 3/8 x 3/8 x 1/2 32672 50 500 0.063 17/32 17/32 11/32 3/8 x 3/8 x 1/4 32674 50 500 0.045 5/16 5/16 15/32 3/8 x 3/8 x 1/8 32678 50 500 0.045 5/16 5/16 39/64 3/8 x 1/4 x 3/8 32684 50 500 0.045 5/16 15/32 3/8 3/8 x 1/4 x 1/4 32686 50 500 0.045 5/16 15/32 15/32 * 3/8 x 1/4 x 1/8 32688 50 500 0.045 5/16 15/32 5/8 3/8 x 1/8 x 3/8 32694 50 500 0.045 5/16 9/16 3/8 1/2 x 1/2 x 1 32702 10 100 0.290 15/16 15/16 3/4 1/2 x 1/2 x 3/4 32704 25 250 0.118 33/64 33/64 15/32 1/2 x 1/2 x 5/8 32706 50 500 0.110 21/32 21/32 1/2 1/2 x 1/2 x 3/8 32708 50 500 0.064 5/16 5/16 13/32 1/2 x 1/2 x 1/4 32710 50 500 0.064 9/32 9/32 13/32 1/2 x 1/2 x 1/8 32712 50 500 0.064 9/32 9/32 1/2 12 Elkhart Products Corporation ** Cast Bronze Only *Factory Option—consult factory for price and delivery WROT CAST 111 Tee-cont. 4711 Copper to Copper to Copper WROT CAST 111 Tee-cont. 4711 Copper to Copper to Copper Wrot & Cast Pressure Fittings Tees Nominal Size Part Box Master Approx. Dim. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B C 1 1/2 x 1 1/4 x 1 1/4 32926 5 50 0.661 31/32 1 3/16 1 1/16 1 1/2 x 1 1/4 x 1 32928 5 50 0.591 27/32 1 3/16 1 1/16 1 1/2 x 1 1/4 x 3/4 32930 5 50 0.583 11/16 7/8 31/32 1 1/2 x 1 1/4 x 1/2 32932 5 50 0.460 9/16 13/16 31/32 1 1/2 x 1 x 1 1/2 32936 5 50 0.680 1 5/32 1 1/4 1 5/32 1 1/2 x 1 x 1 1/4 32938 5 50 0.661 31/32 1 5/16 1 1/16 1 1/2 x 1 x 1 32940 5 50 0.591 27/32 1 1/8 1 1/16 1 1/2 x 1 x 3/4 32942 5 50 0.583 11/16 1 31/32 1 1/2 x 1 x 1/2 32944 5 50 0.460 9/16 13/16 31/32 1 1/2 x 3/4 x 1 1/2 32948 5 50 0.680 1 5/32 1 19/64 1 5/32 1 1/2 x 3/4 x 1 1/4 32950 5 50 0.661 31/32 1 1/4 1 1/16 1 1/2 x 3/4 x 1 32952 5 50 0.591 27/32 1 5/16 1 1/16 1 1/2 x 3/4 x 3/4 32954 5 50 0.583 11/64 1 1/32 31/32 1 1/2 x 3/4 x 1/2 32956 5 50 0.460 9/16 15/16 31/32 1 1/2 x 1/2 x 1 1/2 32960 5 50 0.680 1 5/32 1 31/64 1 5/32 ** 1 1/2 x 1/2 x 1 1/4 36814 5 50 0.750 - - - **2 x 2 x 3 36825 -8 3.110 - - - 2 x 2 x 2 1/2 32972 1 10 1.961 2 2 1 11/16 2 x 2 x 1 1/2 32974 5 40 0.893 3/4 3/4 1 3/32 2 x 2 x 1 1/4 32976 5 40 0.742 11/16 11/16 1 1/8 2 x 2 x 1 32978 5 40 0.673 1/2 1/2 1 3/32 2 x 2 x 3/4 32980 5 40 0.624 7/16 7/16 1 5/32 2 x 2 x 1/2 32982 5 40 0.551 5/16 5/16 1 1/8 2 x 1 1/2 x 2 32984 5 40 1.352 1 3/8 1 37/64 1 3/8 2 x 1 1/2 x 1 1/2 32986 5 40 1.097 1 1/32 1 19/64 1 11/32 2 x 1 1/2 x 1 1/4 32988 5 40 1.013 31/32 1 3/16 1 3/8 2 x 1 1/2 x 1 32990 5 40 1.023 13/16 1 1/16 1 5/16 2 x 1 1/2 x 3/4 32992 5 40 0.960 11/16 1 1/16 1 1/4 2 x 1 1/2 x 1/2 32994 5 40 0.850 5/8 15/16 1 1/4 2 x 1 1/4 x 2 32998 5 40 1.352 1 3/8 1 25/32 1 3/8 2 x 1 1/4 x 1 1/2 33000 5 40 1.097 1 1/32 1 3/8 1 11/32 2 x 1 1/4 x 1 1/4 33002 5 40 1.013 31/32 1 3/16 1 3/8 2 x 1 1/4 x 1 33004 5 40 1.023 13/16 1 9/32 1 5/16 2 x 1 1/4 x 3/4 33006 5 40 0.960 11/16 1 5/32 1 1/4 2 x 1 1/4 x 1/2 33008 5 40 0.850 5/8 1 5/64 1 1/4 2 x 1 x 2 33012 5 40 1.352 1 3/8 1 25/32 1 3/8 ** 2 x 1 x 1 1/2 36852 - 25 1.150 - - - 2 x 1 x 1 33016 5 40 1.023 27/32 1 9/32 1 11/32 2 x 3/4 x 2 33020 5 40 1.352 1 3/8 1 3/4 1 3/8 2 x 3/4 x 3/4 36862 - 50 0.890 - - - 2 x 1/2 x 2 33024 5 40 1.352 1 3/8 1 7/8 1 3/8 2 1/2 x 2 1/2 x 3 33032 1 10 2.744 2 5/8 2 5/8 1 7/8 2 1/2 x 2 1/2 x 2 33034 1 10 1.673 1 7/16 1 7/16 1 11/16 2 1/2 x 2 1/2 x 1 1/2 33036 1 10 1.460 1 3/16 1 3/16 1 19/32 2 1/2 x 2 1/2 x 1 1/4 33038 1 10 1.341 1 1 1 39/64 2 1/2 x 2 1/2 x 1 33040 1 10 1.356 7/8 7/8 1 5/8 2 1/2 x 2 1/2 x 3/4 33042 1 10 1.258 3/4 3/4 1 31/64 2 1/2 x 2 1/2 x 1/2 33044 1 10 1.081 1/2 1/2 1 1/2 2 1/2 x 2 x 2 1/2 33046 1 10 1.961 1 21/32 2 1 11/16 2 1/2 x 2 x 2 33048 1 10 1.673 1 7/16 2 3/64 1 11/16 2 1/2 x 2 x 1 1/2 33050 1 10 1.460 1 3/16 1 3/4 1 19/32 2 1/2 x 2 x 1 1/4 33052 1 10 1.341 1 1 11/16 1 39/64 2 1/2 x 2 x 1 33054 1 10 1.356 7/8 1 9/16 1 5/8 2 1/2 x 2 x 3/4 33056 1 10 1.258 3/4 1 3/8 1 31/64 2 1/2 x 2 x 1/2 33058 1 10 1.081 1/2 1 11/32 1 1/2 2 1/2 x 1 1/2 x 2 1/2 33062 1 10 1.961 1 21/32 2 21/32 1 11/16 2 1/2 x 1 1/2 x 2 33064 1 10 1.673 1 7/16 2 15/32 1 11/16 Nominal Size Part Box Master Approx. Dim. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B C 2 1/2 x 1 1/2 x 1 1/2 33066 1 10 1.460 1 3/16 2 19/64 1 19/32 2 1/2 x 1 1/2 x 1 1/4 33068 1 10 1.341 1 2 3/16 1 39/64 2 1/2 x 1 1/4 x 2 1/2 33076 1 10 1.961 1 21/32 2 31/32 1 11/16 2 1/2 x 1 1/4 x 2 33078 1 10 1.673 1 7/16 2 45/64 1 11/16 2 1/2 x 1 x 2 1/2 33092 1 10 1.961 1 21/32 3 7/32 1 11/16 2 1/2 x 3/4 x 2 1/2 33108 1 10 1.961 1 21/32 3 7/16 1 11/16 ** 2 1/2 x 1/2 x 2 1/2 36916 10 20 2.460 - - - 3 x 3 x 4 33126 1 8 6.396 3 21/32 3 21/32 2 9/16 3 x 3 x 2 1/2 33128 1 10 2.351 1 11/16 1 11/16 1 31/32 3 x 3 x 2 33130 1 10 2.270 1 7/16 1 7/16 1 31/32 3 x 3 x 1 1/2 33132 1 10 2.024 1 3/16 1 3/16 1 29/32 3 x 3 x 1 1/4 33134 1 10 1.939 31/32 31/32 1 59/64 3 x 3 x 1 33136 1 10 1.757 7/8 7/8 1 59/64 3 x 3 x 3/4 33138 1 10 1.691 3/4 3/4 1 13/16 3 x 3 x 1/2 33140 1 10 1.542 9/16 9/16 1 11/16 3 x 2 1/2 x 3 33144 1 10 2.744 1 7/8 2 5/8 1 7/8 3 x 2 1/2 x 2 1/2 33146 1 10 2.351 1 11/16 2 13/32 1 31/32 3 x 2 1/2 x 2 33148 1 10 2.270 1 7/16 2 1/8 1 31/32 3 x 2 1/2 x 1 1/2 33150 1 10 2.024 1 3/16 1 7/8 1 29/32 3 x 2 1/2 x 1 1/4 33152 1 10 1.939 31/32 1 3/4 1 59/64 3 x 2 1/2 x 1 33154 1 10 1.757 7/8 1 5/8 1 59/64 3 x 2 1/2 x 3/4 33156 1 10 1.691 3/4 1 17/32 1 13/16 3 x 2 x 3 33162 1 10 2.744 1 7/8 3 1/16 1 7/8 3 x 2 x 2 1/2 33164 1 10 2.351 1 11/16 2 23/32 1 31/32 3 x 2 x 2 33166 1 10 2.270 1 7/16 2 9/16 1 31/32 3 x 2 x 1 1/2 33168 1 10 2.024 1 3/16 2 5/16 1 29/32 * 3 x 2 x 1 1/4 33170 1 10 1.939 31/32 2 3/16 1 59/64 * 3 x 2 x 1 33172 1 10 1.757 7/8 2 1 59/64 3 x 1 1/2 x 3 33180 1 10 2.744 1 7/8 3 9/16 1 7/8 * 3 x 1 1/2 x 2 1/2 33182 1 10 2.351 1 11/16 3 5/16 1 31/32 * 3 x 1 1/2 x 2 33184 1 10 2.270 1 7/16 3 1/8 1 31/32 3 x 1 1/2 x 1 1/2 33186 1 10 2.024 1 3/16 2 25/32 1 29/32 * 3 x 1 1/4 x 3 33196 1 10 2.744 1 7/8 3 23/32 1 7/8 3 x 1 x 3 33214 1 10 2.744 1 7/8 3 29/32 1 7/8 3 x 3/4 x 3 33232 1 10 2.744 1 7/8 4 1/32 1 7/8 4 x 4 x 3 33262 1 8 5.714 2 1/32 2 1/32 2 1/2 4 x 4 x 2 1/2 33264 1 8 5.361 1 25/32 1 25/32 2 19/32 4 x 4 x 2 33266 1 8 4.880 1 1/2 1 1/2 2 7/16 4 x 4 x 1 1/2 33268 1 8 4.985 1 3/16 1 3/16 2 9/16 4 x 4 x 1 1/4 33270 1 8 4.715 1 3/32 1 3/32 2 1/2 4 x 4 x 1 33272 1 8 4.502 15/16 15/16 2 5/16 4 x 4 x 3/4 33274 1 16 2.393 13/32 13/32 2 5/16 4 x 4 x 1/2 33276 1 16 2.296 1/2 1/2 2 5/16 4 x 3 x 4 33280 1 8 6.396 2 13/32 3 21/32 2 35/64 4 x 3 x 3 33282 1 8 5.714 2 1/32 3 1/32 2 1/2 4 x 3 x 2 1/2 33284 1 8 5.361 1 25/32 2 29/32 2 19/32 4 x 3 x 2 33286 1 8 4.880 1 1/2 2 23/32 2 7/16 4 x 2 1/2 x 4 33300 1 8 6.396 2 13/32 4 1/16 2 35/64 4 x 2 1/2 x 2 1/2 33304 1 8 5.361 1 25/32 3 5/16 2 19/32 4 x 2 x 4 33320 1 8 6.396 2 13/32 4 1/2 2 35/64 4 x 2 x 2 33326 1 8 4.880 1 1/2 3 17/32 2 7/16 4 x 1 1/2 x 4 33340 1 8 6.396 2 13/32 4 29/32 2 35/64 4 x 1 x 4 33380 1 8 6.396 2 13/32 5 9/32 2 25/64 * 5 x 5 x 4 33404 1 6 6.950 2 7/64 2 7/64 2 15/16 * 5 x 5 x 3 33406 1 6 5.604 1 9/16 1 9/16 2 15/16 *5 x 5 x 2 1/2 33408 1 6 5.511 1 13/32 1 13/32 2 15/16 *5 x 5 x 2 33410 1 6 4.824 1 5/64 1 5/64 2 7/8 ** Cast Bronze Only *Factory Option—consult factory for price and delivery information.Elkhart Products Corporation 13 Wrot & Cast Pressure Fittings Tees & Plugs WROT CAST 111 Tee-cont. 4711 Copper to Copper to Copper A B C A C x FTG. x C C x F x C WROT CAST Baseboard Tee 4714-B Copper to Female N.P.T. to Copper WROT CAST 116 Fitting End Plug For Fitting WROT CAST 111-2 Street Tee Copper to Fitting to Copper A C B Nominal Size Part Box Master Approx. Dim. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B C * 5 x 5 x 1 1/2 33412 1 6 4.479 27/32 27/32 2 7/8 *5 x 5 x 1 1/4 33414 1 6 4.276 3/4 3/4 2 7/8 * 5 x 5 x 1 33416 1 6 4.050 21/32 21/32 2 7/8 * 5 x 5 x 3/4 33418 1 6 3.841 5/8 5/8 2 7/8 * 5 x 4 x 5 33398 1 1 10.087 2 37/64 4 1/8 29/32 * 5 x 4 x 4 33399 1 1 8.101 2 1/8 3 29/64 2 15/16 * 6 x 6 x 5 33424 1 1 11.580 2 45/64 2 45/64 3 7/16 * 6 x 6 x 4 33426 1 1 10.132 2 13/64 2 13/64 3 7/16 * 6 x 6 x 3 33428 1 1 8.093 1 11/16 1 11/16 3 7/16 * 6 x 6 x 2 1/2 33430 1 1 7.663 1 7/16 1 7/16 3 7/16 * 6 x 6 x 2 33432 1 1 7.132 1 17/32 1 17/32 3 7/16 * 6 x 6 x 1 1/2 33434 1 6 6.716 15/16 15/16 3 7/16 * 6 x 6 x 1 1/4 33436 1 6 6.454 13/16 13/16 3 7/16 * 6 x 6 x 1 33438 1 6 6.168 11/16 11/16 3 7/16 *6 x 6 x 3/4 33440 1 6 5.885 5/8 5/8 3 7/16 *6 x 6 x 1/2 33441 1 6 5.668 11/32 11/32 3 11/32 * 6 x 4 x 6 33443 1 1 13.252 3 1/8 4 23/32 3 11/16 * 6 x 4 x 4 33446 1 1 10.103 2 13/64 4 3/16 3 7/16 *8 x 8 x 6 33456 1 1 26.140 3 1/16 3 1/16 4 1/2 * 8 x 8 x 5 33458 1 1 23.380 2 9/16 2 9/16 4 1/2 *8 x 8 x 4 33460 1 1 20.706 2 1/16 2 1/16 4 9/16 * 8 x 8 x 3 33462 1 1 18.308 1 1/2 1 1/2 4 1/2 * 8 x 8 x 2 1/2 33464 1 1 17.650 1 23/64 1 23/64 4 9/16 * 8 x 8 x 2 33466 1 1 17.199 1 1/16 1 1/16 4 1/2 *8 x 6 x 6 33468 1 1 25.984 3 1/16 4 1/2 4 1/2 Nominal Size Part Box Master Approx. Dim. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B C 1/2 33506 50 500 0.069 3/8 1 1/32 3/8 3/4 33508 25 250 0.147 1/2 1 7/16 15/32 Nominal Size Part Box Master Approx. Dim. Dim. Dim. In Inches Number Quantity Pack Net Wt. A B C ** 1/2 x 1/8 x 1/2 37852 40 320 0.110 - - - ** 1/2 x 1/8 x 3/4 37850 20 160 0.170 - - - ** 3/4 x 1/8 x 3/4 37855 35 210 0.186 - - - ** 1 x 1/8 x 1 37857 15 90 0.300 - - - ** 1 1/4 x 1/8 x 1 1/4 37858 - 45 0.501 - - - Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt.A * 3/8 32020 50 1000 0.010 1/16 1/2 32022 100 1000 0.016 3/32 3/4 32026 50 500 0.036 1/8 1 32028 25 250 0.059 5/32 14 Elkhart Products Corporation ** Cast Bronze Only *Factory Option—consult factory for price and delivery information. Wrot & Cast Pressure Fittings Caps & Reducers A A FTG. x C WROT CAST 117 Tube Cap 4717 For Tube End WROT CAST 118 Fitting Reducer Fitting to Copper WROT CAST 118 Fitting Reducer-cont. Fitting to Copper Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/8 30620 50 1000 0.003 1/32 1/4 30622 50 1000 0.005 1/16 3/8 30624 50 1000 0.010 3/32 1/2 30626 100 1000 0.016 5/64 5/8 30628 25 500 0.030 1/8 3/4 30630 50 500 0.036 5/64 1 30632 50 500 0.059 1/8 1 1/4 30634 25 250 0.108 5/32 1 1/2 30636 20 200 0.159 5/32 2 30638 10 100 0.284 5/32 2 1/2 30640 5 50 0.469 5/32 3 30642 5 50 0.713 3/16 3 1/2 30644 1 10 0.970 3/16 4 30646 1 10 1.384 7/32 **5 34647 - 5 5.484 - **6 34648 - 5 9.670 - Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 1/4 OD x 1/8 OD 32040 50 1000 0.004 33/64 1/4 x 1/8 32042 50 1000 0.007 1/2 3/8 x 1/4 32044 50 1000 0.014 17/32 3/8 x 1/8 32046 50 1000 0.016 5/8 1/2 x 3/8 32048 50 1000 0.025 23/32 1/2 x 1/4 32050 50 1000 0.022 47/64 5/8 x 1/2 32054 25 500 0.033 25/32 5/8 x 3/8 32056 25 500 0.029 29/32 5/8 x 1/4 32058 25 500 0.038 15/16 3/4 x 5/8 32062 50 500 0.052 15/16 3/4 x 1/2 32064 50 500 0.058 1 Nominal Size Part Box Master Approx. Dim. In Inches Number Quantity Pack Net Wt. A 3/4 x 3/8 32066 50 500 0.037 1 1/16 3/4 x 1/4 32068 50 500 0.049 1 1/8 1 x 3/4 32072 25 250 0.092 1 3/16 1 x 5/8 32074 25 250 0.089 1 7/32 1 x 1/2 32076 25 250 0.095 1 9/32 1 x 3/8 32078 25 250 0.088 1 3/8 1 1/4 x 1 32082 10 100 0.150 1 1/4 1 1/4 x 3/4 32084 10 100 0.118 1 11/32 1 1/4 x 1/2 32086 10 100 0.169 1 15/32 1 1/2 x 1 1/4 32090 10 100 0.206 1 19/64 1 1/2 x 1 32092 10 100 0.203 1 17/32 1 1/2 x 3/4 32094 10 100 0.200 1 11/16 1 1/2 x 1/2 32096 10 100 0.207 1 7/8 2 x 1 1/2 32102 10 100 0.374 1 11/16 2 x 1 1/4 32104 10 100 0.360 1 15/16 2 x 1 32106 10 100 0.357 2 1/8 2 x 3/4 32108 10 100 0.403 2 11/32 2 x 1/2 32110 10 100 0.426 2 7/16 2 1/2 x 2 32114 5 50 0.643 1 15/16 2 1/2 x 1 1/2 32116 5 50 0.666 2 1/4 2 1/2 x 1 1/4 32118 5 50 0.628 2 5/16 2 1/2 x 1 32120 5 50 0.655 2 17/32 3 x 2 1/2 32126 2 20 0.893 2 3/32 3 x 2 32128 2 20 0.948 2 33/64 3 x 1 1/2 32130 2 20 1.027 2 11/16 3 x 1 1/4 32132 2 20 1.029 2 25/32 3 1/2 x 3 32136 1 10 1.336 2 1/4 3 1/2 x 2 1/2 32138 1 10 1.344 2 7/16 3 1/2 x 2 32140 1 10 1.380 2 51/64 4 x 3 1/2 32144 2 32 1.850 2 23/32 4 x 3 32146 2 32 1.860 2 15/16 4 x 2 1/2 32148 2 32 1.929 3 7/32 4 x 2 32150 2 32 2.003 3 17/32 5 x 4 32154 1 6 3.240 3 11/32 5 x 3 32156 1 6 3.168 3 13/16 5 x 2 1/2 32158 1 6 3.084 4 9/64 5 x 2 32160 1 6 2.901 4 7/16 6 x 5 32164 1 6 4.642 3 7/8 6 x 4 32166 1 6 4.556 4 3/8 6 x 3 32168 1 6 4.388 4 23/32 6 x 2 1/2 32170 1 6 4.304 5 1/32 6 x 2 32172 1 6 4.517 5 7/32 8 x 6 32176 1 1 10.643 5 7/32 8 x 5 32178 1 1 11.379 5 23/32 8 x 4 32180 1 1 11.244 6 3/32 8 x 3 32182 1 1 12.291 6 19/32 OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330 CUSTOMER SERVICE • 800.786.5266 www.tolco.com 90 www.tolco.com Revision 3/1/2007 Fig. 200 - “Trimline” Adjustable Band Hanger Size Range — 1/2" thru 8" pipe Material — Carbon Steel, Mil. Galvanized to G90 specifications Function — For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation. Features — • (1/2" thru 2") Flared edges ease installation for all pipe types and protect CPVC plastic pipe from abrasion. Captured design keeps adjusting nut from separating with hanger. Hanger is easily installed around pipe. • (21⁄2" thru 8") Spring tension on nut holds it securely in hanger before installation. Adjusting nut is easily removed. Approvals — Underwriters’ Laboratories listed (1/2" thru 8") in the USA (UL) and Canada (cUL) for steel and CPVC plastic pipe and Factory Mutual Engineering Approved (3/4" thru 8"). Conforms to Federal Specifications WW-H-171E, Type 10 and Manufacturers Standardization Society SP-69, Type 10. Maximum Temperature — 650°F Finish — Mil. Galvanized. For Stainless Steel materi- als, order TOLCO™ Fig. 200WON. Order By — Figure number and pipe size Dimensions • Weights Pipe Rod Size Max. Rec. Approx. Size Inch Metric A B Load Lbs. Wt./100 1/2 3/8 8mm or 10mm 31⁄8 25⁄8 400 11 3/4 3/8 8mm or 10mm 31⁄8 21⁄2 400 11 1 3/8 8mm or 10mm 33⁄8 25⁄8 400 12 11⁄4 3/8 8mm or 10mm 33⁄4 27⁄8 400 13 11⁄2 3/8 8mm or 10mm 37⁄8 27⁄8 400 14 2 3/8 8mm or 10mm 41⁄2 3 400 15 21⁄2 3/8 10mm 55⁄8 41⁄8 600 27 3 3/8 10mm 57⁄8 4 600 29 31⁄2 3/8 10mm 73⁄8 51⁄4 600 34 4 3/8 10mm 73⁄8 5 1000 35 5 1/2 12mm 91⁄8 61⁄4 1250 66 6 1/2 12mm 101⁄8 63⁄4 1250 73 8 1/2 12mm 131⁄8 83⁄4 1250 136 Expanded Approvals! www.itwbuildex.com 800-284-5339 SSS26 0506 * SWG 25-380 Maximum pipe size in composite wood joist allowed by UL is 3-1/2" SWG 25-380 Maximum pipe size in wood timber or joist allowed by UL is 4" ** SWG 20 Maximum pipe size in composite wood joist allowed by UL is 2-1/2" ** SWG 20 Maximum pipe size in wood timber or joist allowed by UL is 3" UL and FM tests were performed in compliance with NFPA-13 Standards. Fastening requirement: 5 times weight of water filled schedule 40 pipe plus 250 pounds. ® BX P/N WOOD UL UL Max Pipe Size, in. UL Test Load Minimum Wood Thickness, in. FM FM Max Pipe Size FM Test Load Minimum Wood Thickness, in. 8007957 GST 10 X CPVC 1-1/2 300 1.5 8020957 SWG 10 X CPVC 1-1/2 300 1.5 8008957 GST 20 X 2-1/2 850 1.5 X 4 1475 1.5 8068925 GST 20 SS X 2-1/2 850 1.5 8010957 GST 30 X 4 1500 1.5 X 4 1475 1.5 8009925 GST 25-380 X 4 1500 1.5 8022925 SWG 25-380 X 3-1/2 - 4* 1500 1.5 8021957 SWG 20 X 2-1/2 - 3** 1250 1.5 8073925 SWG 20 SS X 2-1/2 1250 1.5 8139957 SH GST 20 X 3 1050 1.5 X 4 1475 1.5 8141957 SH GST 30 X 4 1500 1.5 X 4 1475 1.5 BX P/N STEEL UL UL Max Pipe Size, in. UL Test Load Minimum Steel Thickness, in. FM FM Max Pipe Size FM Test Load Minimum Steel Thickness, in. 8038957 DSTR 1 X 4 1500 0.035 X 4 1475 0.1050 8037957 DSTR 1-1/2 X 4 1500 0.035 X 4 1475 0.1050 8039957 DSTR 516 X 4 1500 0.037 X 4 1475 0.1050 8045957 DST 516 X 4 1500 0.188 X 4 1475 0.1875 8046957 TEK 50 X 4 1500 0.250 X 4 1475 0.1875 8055957 SWDR 1 X 4 1500 0.037 X 4 1475 0.0600 8056957 SWDR 516 X 4 1500 0.037 X 4 1475 0.0600 8054957 SWDR 1-1/2 X 4 1500 0.037 X 4 1475 0.0600 8137957 SH DSTR 1 X 4 1500 0.035 X 4 1475 0.1050 8150922 XP 20 X 2 750 0.027 X 4 1475 0.1050 8153922 XP 35 X 3-1/2 1250 0.043 X 4 1475 0.1050 BX P/N CONCRETE FM FM Max Pipe Size FM Test Load Material 8059957 CST 20 X 4 1475 3000 PSI 8061957 SWC 20 X 4 1475 3000 PSI Office/Manufacturing Facility •1375 Sampson Ave. •Corona, CA 92879 •Ph: 951.737.5599 •Fax: 951.737.0330 Customer Service •800.786.5266 www.tolco.com 72 www.tolco.com Revision 5/24/2001 ™ ®a brand of Fig. 98 - Rod Stiffener Size Range — Secures 3/8" thru 7/8" hanger rod Material — Carbon Steel Function — Secures channel to hanger rod for vertical seismic bracing. Finish — Electro Galvanized Note — Available in HDG finish or Stainless Steel materials. Order By — Figure number Fig. 99 - All Thread Rod Cut to Length Size Range — Secures 3/8" thru 7/8" rod in 1" increments Material — Carbon Steel Maximum Temperature — 750°F Finish — Plain Note — Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By — Figure number, rod diameter, rod length and finish Fig. 100 - All Thread Rod Full Lengths Size Range — Secures 3/8" thru 7/8" rod in 10’ lengths Material — Carbon Steel Maximum Temperature — 750°F Finish — Plain Note — Available in Electro-Galvanized and HDG finish or Stainless Steel materials. Order By — Figure number, rod diameter and finish Dimensions • Weights Rod Max. Rec. Load Lbs. Size For Service Temps 650°F 750°F 3/8 610 540 1/2 1130 1010 5/8 1810 1610 3/4 2710 2420 7/8 3770 3360 Dimensions • Weights Max Rec. Load Lbs. Rod For Service Temps Approx. Size 650°F 750°F Wt./100 1/4 240 215 12 3/8 610 540 29 1/2 1130 1010 53 5/8 1810 1610 84 3/4 2710 2420 123 7/8 3770 3360 169 1 4960 4420 222 11/4 8000 7140 360 11/2 11630 10370 510