HomeMy WebLinkAboutOTC14-0047 cut sheets.pdf Technical Data Sheet CertainTeed
Presidential Shaken" IR (Impact Resistant) SAINT-GOBAIN
PRODUCT INFORMATION
Presidential Shake IR is made of two laminated layers of the
industry's most durable materials. And, with a super tough
reinforcement added to its back surface, it has an extra level of
impact resistance—so much so that it can withstand the force of a
two-inch steel ball dropped from twenty feet without cracking. The
shades, textures, sculpted edges and staggered design all combine to give a roof the charm and beauty
of authentic wood shakes at a fraction of the cost.
Presidential Shake IR shingles are algae resistant and help protect against staining or discoloration
caused by algae.
Colors: i,AJ?4 ) t j
Limitations: It is recommended to apply these shingles at slopes of 4"per foot slope and greater in order
to achieve optimum appearance. For low slope applications(2" up to 4" per foot) of Presidential Shake
IR shingles apply CertainTeed WinterGuard Waterproofing Shingle Underlayment or its equivalent
meeting ASTM D1970, or two layers of 36"wide felt shingle underlayment(Roofers' Select High-
Performance Underlayment or product meeting ASTM D4869 or ASTM D6757) lapped 19", over entire
deck according to the application instructions provided with the product. In areas where icing along the
eaves can cause the back-up of water(all slopes), apply WinterGuard, or its equivalent, according to
application instructions provided with the product and on the shingle package. For Class 4 impact
resistance, Presidential Shake IR (Impact Resistant) shingles must be applied according to the
instructions indicated below, in a new roof or tear-off application, and not by"roofing-over"existing
shingles.
On slopes greater than 21" per foot, use nine nails and apply 1"diameter spots of asphalt roofing cement
(ASTM D4586 Type II) under each shingle tab, according to application instructions provided with the
product and the shingle package.
Product Composition: Presidential Shake IR shingles are composed of a fiber glass mat base.
Ceramic-coated mineral granules are tightly embedded in carefully refined,water-resistant asphalt. The
laminated pieces are firmly adhered in a special tough asphaltic cement. The back surface contains a
puncture resistant fiber glass scrim. These fiber glass based shingles have self-sealing adhesive applied.
Applicable Standards:
ASTM D3018, Type I UL 2218 Class 4 Impact Resistance
ASTM D3462 NYC-MEA-120-79-M
ASTM E108 Class A Fire Resistance ICC-ES Evaluation Report ESR-1389
ASTM D3161 Class F Wind Resistance CSA Standard A123.5-98 (&-05)
ASTM D 7158 Class H Wind Resistance Miami-Dade Product Control Approved
UL 2390/ASTM 06381 Class H Wind Resistance Florida Product Approval#FL5444
UL 790 Class A Fire Resistance TDI Windstorm Resistance
UL 997 Wind Resistance
Technical Data: Presidential Shake IR
Weight/Square (approx.): 355 lb
Dimensions (overall): 14 1/4"x 40"
Shingles/Square: 90
Weather Exposure: 4"