The URL can be used to link to this page

Home My WebLink AboutB17-0049_approved documents_1512757027.pdf75 South Frontage Road West, Vail, CO 81657 Office: 970.479.2139 Inspection Line: 970.479.2149 Construction B17-0049 / Revision 002 Issued: 12/08/2017 TOWN OF VAIL Property Information Address: 1255 WESTHAVEN CIR B ( 210312106019 ) Unit #: B Parcel Number: 210312106019 Legal Description: Subdivision: GLEN STREAM 45 PARCEL B Contacts Contact Type: Applicant Full Name: Mark Scully Address: Phone: 376-1807 Contact Type: Property Owner Full Name: WESTHAVEN LLC Address: 1825 K ST NW STE 507 WASHINGTON, DC 20006-1221 Phone: None Contractor Contractor Type: General Company: Vail Custom Builders State License #: Phone: 970-904-0512 Project Information Project Name: Westhaven LLC/Lipnick Residence 2016 Project Description: REV2- Structural drawing to change boulder retaining wall to concrete retaining wall Fees Paid Account #: 001-0000.31111.00 - Building Permit Fee Fee Amount:$14,551.25 Account #: 001-0000.31123.00 - Building Plan Review Fee Fee Amount:$9,458.31 Account #: 110-0000.31060.00 - Construction Use Tax Fee Fee Amount:$68,800.00 Account #: 001-0000.31111.00 - Mechanical Permit Fee Fee Amount:$6,000.00 Account #: 001-0000.31123.00 - Mechanical Plan Review Fee Fee Amount:$1,500.00 Account #: 001-0000.31111.00 - Plumbing Permit Fee Fee Amount:$2,250.00 Account #: 001-0000.31123.00 - Plumbing Plan Review Fee Fee Amount:$562.50 Account #: 111-0000.31127.00 - Recreation Fee Fee Amount:$1,077.15 Account #: 001-0000.31111.00 - Revision Fee Fee Amount:$605.00 Account #: 001-0000.31128.00 - Will Call Fee (Building Scope)Fee Amount:$5.00 Account #: 001-0000.31128.00 - Will Call Fee (Mechanical Scope)Fee Amount:$5.00 Account #: 001-0000.31128.00 - Will Call Fee (Plumbing Scope)Fee Amount:$5.00 Total Paid:$104,819.21 Conditions CONDITIONS UNDER WHICH PERMITS BECOME VOID: If construction is not begun within 6 months from the date permit was issued. If more than 5 months elapses between inspections. If incorrect information is given on the application at the time the permit was issued. Christopher Jarecki - Town of Vail Building Official NOTICE: By issuance of this Permit the applicant agrees to comply with all Titles of the Town of Vail Code and all applicable State and Federal law. Failure to do so will void this Permit and the applicant shall forfeit all applicable fees. PERMIT FEE RECEIPT Case # B17-0049.002 Date Printed: 12/08/2017 TOWN OF VAIL - FEES RECEIPT Permit Summary Case Number: B17-0049.002 Status: Approved Permit Number: Date Started: 11/08/2017 Permit Type: Construction Subcases Single Family Lot Number: 45 Property: 1255 WESTHAVEN CIR A (210312106018) 1255 WESTHAVEN CIR B (210312106019) Contacts Contact Type: Applicant Company Name: Vail Custom Builders Full Name: Mark Scully Address: Email: mark@vailcustom.com Contact Type: Property Owner Full Name: WESTHAVEN LLC Address: 1825 K ST NW STE 507 WASHINGTON, DC 20006-1221 Permit Fees Fee Information Account Amount Revision Fee 001-0000.31111.00 $220.00 Payment Information Date Paid Payment Type Amount Revision Fee 12/08/2017 Credit Card $220.00 Paid By: - Notes: Visa - Mark Scully FEE TOTAL $220.00 AMOUNT PAID $220.00 BALANCE DUE $0.00 12/08/2017 - 11:11:14 AM - Generated by: dcouch75 South Frontage Road West, Vail, Colorado 81657 1 / 1 Departmentof Community Development 75 South Frontage Road Vail, CO 81657 Tel: 970.479.2139 www.vailgov.com TRANSMITTAL FORM Use this form when submitting additional information, changes & inspection reports for building permits. This form is also used for requesting a revision to building permits. A two hour minimum building review fee of $110 will be charged upon reissuanceof the permit. Subm it this form only to: cdev_submittal@vailgov.com. Deliverpaper plans to Community Develop- ment or uploadyour revised/corrected plans to the appropriateproject in ProjectDox, when requested. r - - ·J 1ourct &r1d7iiiP--------------------.!Application/Permit #(s) information applies to: II~Revisions I()Deferred Submittal ( ) Response to Correction Letter ~attached copy of correction letter ~ther$frq C>/a. ;Q,( t),-q4,11>:r5rvI .. ·.· - · - · · · · . · · c e . - · : . · :iProject Street Address: I\hf5' > fJ J?f./-/lq@A Gn~~ Description of Transmittal/List of Changes,Items Attached, ·lndic~hanged plan p a g e h I (Number) (Street) (Suite#) i ~ tee{c/u w U..u<-l tu ~"TO Building/ComplexName: _ _ _ _ _ _ _ _ _ _ , L/.cu-fy /lo'-<-(o(;f '/Ji{gri 4.hfA .UaJLCuJk!i Ba.ild?rr h Cblfc/~& :e.k,j &tit Applicant Information : (architect, contractor, owner/owner's rep) !Contact Name: ~/l:t/!((,Gc-t.l!y' !Address: ·City t},.-~-v_a_.c._/_J_ _ s_ta-te-:-G -d--z-ip-:-<?1'-.-~-J-)... (use additional sheet ifnecessary) r--------.--·-------------~~-·---------------·----------------·· i Contact Name: - - - - - - - - - - - - - - - - - - '·--------------··-----------..- - - - - - - - - - - - - - - - - - - - - - - ·; ! Contact Phone: 0--"7 , ~7 ; c;;:1 / Building Permits:I /V ./ "b - / I "·Revised ADDITIONAL Valuations (Labor & Materials) /,l,4 .A /J- / .t.') 1 Jr. .. , /.J }·'/ p/l . (DO NOT include original valuation) iContactE-Mail: vn"i"'tln< ...~ t/ll . l c/1. fiN(,,G!f/T lfl ~I/! Building: $ N-ef--U - - - - 1hereby acknowledgethat I have read this application, filled out in full the information required, completed an accurateplot plan, and state that all the information as required is correct. I agreeto Plumbing: comply with the information and plot plan, to comply with all Town Electrical: ordinances and state laws, and to build this structureaccording to the town'szoning and subdivision codes, design reviewap- proved, International Building d Residential Codes and other xrdi~f t e &1/ appf"~ t ereto. Mechanical: Total: ;Owner/ Required)1- ··---------...---- --- ----·--· ·-----·-·-·--·--·----·--·-- i i I - - - ----------------- - - ··- - ·---------·-·------ - - - - - - ..............._I Date Received: 21-Apr-2017 TOWN OF~ Department of Community Development 75 South Frontage Road Vail, CO 81657 Tel: 970.479.2139 www.vailgov.com TRANSMITTAL FORM Use this form when submitting additional information, changes & inspection reports for building permits. This form is also used forrequesting a revision to building permits. A two hourminimum building review fee of$11Owill be charged upon reissuance ofthe permit. on&y to: cdev_aubmlttal@vallgov.com. Deliver paperplans to Community Develop- YQ!JI:revfsed/coneded lans to the appropriate project in ProjectDox, when requested. Application/Permit #(s) information applies to: 817 '""-ool/ q f i Revisions dJ Response to Correction Letter _attached copy ofcorrection letter dJDeferred Submittal /;}. '55 {(/pgf-ha.iM-AJ.. c,..c_1--e d]Other Project Street Address: Ct~c..)t td.f., lJp.Ffhe!~ Description ofTransmittal/ List ofChanges, Items Attached, Indicate changed plan pages: (Number) (Street) (Suite#) Building/Complex Name: f31r().c_:,f v ~( tfoo ri c)a11;A./ ~ tlfS>"vrJ .S I fro r-,Sift60 11 ~,1-0 c4 Applicant Information +o a Craw/ s;/JCIC.-(' (architect, contractor, owner/owner's rep) Contact Name: ~ r /L. 5cu II:(I Address: ! City State: Zip:(use additional sheet ifnecessary) i: Contact Name: ----·····---·---··-------------------"------·-·-----·------·--~ - - - - - - - Building Permits:iContact Phone: t:/7D 3 7(t;i I f'o 7 Revised ADDITIONAL Valuations (Labor & Materials) iContact E-Mail: W;a-<{(_ ~ (/a; (Cu srf ~I c0 J!1 (DO NOT include original valuation) Building: I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plotplan, Plumbing: and state that all the information as required is correct. I agree to comply with the information and plot plan, to comply with all Town Electrical: ordinances and state laws, and to build this structure according to the town's zoning·and subdivision codes, design review ap- Mechanical: proved, International Building an esidential Codes and other ordinan s t plic e thereto. Total: ix~--~-+----r-----~--------~ $~~~~~~~~ $~~~~~~~~ $~~~~~~~~ $~~~~~~~~- $_ __.(') ....... · '-- - - - - 21-Apr-2017 By cgodfrey at 11:55 am, Mar 20, 2017 B17-0049 Air System Sizing Summary for Whole Building Project Name: 16090-Lipnick Residence 03/13/2017 Prepared by: Rader Engineering Inc. 09:24AM Air System Information Air System Name Whole Building Equipment Class UNDEF Air System Type SZCAV Number of zones 1 Floor Area 6140.0 ft² Location Vail, Colorado Sizing Calculation Information Calculation Months Jan to Dec Sizing Data Calculated Zone CFM Sizing Peak zone sensible load Space CFM Sizing Coincident space loads Central Cooling Coil Sizing Data Total coil load 7.5 Tons Total coil load 90.0 MBH Sensible coil load 87.7 MBH Coil CFM at Aug 1600 5573 CFM Max block CFM 5573 CFM Sum of peak zone CFM 5573 CFM Sensible heat ratio 0.973 ft²/Ton 818.3 BTU/(hr·ft²) 14.7 Water flow @ 10.0 °F rise 18.02 gpm Load occurs at Aug 1600 OA DB / WB 88.9 / 64.7 °F Entering DB / WB 76.0 / 61.2 °F Leaving DB / WB 56.3 / 54.9 °F Coil ADP 54.1 °F Bypass Factor 0.100 Resulting RH 47 % Design supply temp. 50.0 °F Zone T-stat Check 1 of 1 OK Max zone temperature deviation 0.0 °F Central Heating Coil Sizing Data Max coil load 128.7 MBH Coil CFM at Des Htg 5573 CFM Max coil CFM 5573 CFM Water flow @ 20.0 °F drop 12.88 gpm Load occurs at Des Htg BTU/(hr·ft²) 21.0 Ent. DB / Lvg DB 68.5 / 97.4 °F Humidifier Sizing Data Max steam flow at Des Htg 7.79 lb/hr Airflow Rate 5573 CFM Air mass flow 18557.78 lb/hr Moisture gain .00042 lb/lb Supply Fan Sizing Data Actual max CFM 5573 CFM Standard CFM 4124 CFM Actual max CFM/ft² 0.91 CFM/ft² Fan motor BHP 0.76 BHP Fan motor kW 0.61 kW Fan static 0.50 in wg Outdoor Ventilation Air Data Design airflow CFM 0 CFM CFM/ft² 0.00 CFM/ft² CFM/person 0.00 CFM/person Hourly Analysis Program v5.01 Page 1 of 2 3/13/17 Zone Sizing Summary for Whole Building Project Name: 16090-Lipnick Residence 03/13/2017 Prepared by: Rader Engineering Inc. 09:24AM Air System Information Air System Name Whole Building Equipment Class UNDEF Air System Type SZCAV Number of zones 1 Floor Area 6140.0 ft² Location Vail, Colorado Sizing Calculation Information Calculation Months Jan to Dec Sizing Data Calculated Zone CFM Sizing Peak zone sensible load Space CFM Sizing Coincident space loads Zone Terminal Sizing Data Zone Name Design Supply Airflow (CFM) Minimum Supply Airflow (CFM) Zone CFM/ft² Reheat Coil Load (MBH) Reheat Coil Water gpm @ 20.0 °F Zone Htg Unit Coil Load (MBH) Zone Htg Unit Water gpm @ 20.0 °F Mixing Box Fan Airflow (CFM) Whole House 5573 5573 0.91 0.0 0.00 0.0 0.00 0 Zone Peak Sensible Loads Zone Zone Zone Cooling Time of Heating Floor Sensible Peak Sensible Load Area Zone Name (MBH) Cooling Load (MBH) (ft²) Whole House 90.2 Aug 1600 133.6 6140.0 Space Loads and Airflows Zone Name / Space Name Mult. Cooling Sensible (MBH) Time of Peak Sensible Load Air Flow (CFM) Heating Load (MBH) Floor Area (ft²) Space CFM/ft² Whole House 001-Storage 1 3.1 Aug 1600 387 9.3 633.0 0.61 002-Wet Bar 1 6.5 Aug 1600 518 12.4 711.0 0.73 003-Bunk Room 1 2.8 Aug 1600 224 5.4 322.0 0.69 004-Bath 1 1.0 Aug 1600 18 0.4 94.0 0.20 005-Guest Bed 3 1 3.7 Aug 1600 247 5.9 238.0 1.04 007-Bath 1 1.7 Aug 1600 74 1.8 129.0 0.57 008-Laundry 1 0.4 Aug 1600 69 1.7 87.0 0.80 009-Guest Bed 1 1 3.6 Aug 1600 221 5.3 245.0 0.90 010-WIC 1 0.1 Aug 1600 7 0.2 36.0 0.20 011-Bath 1 1.2 Aug 1600 56 1.3 105.0 0.53 012-Guest Bed 2 1 4.1 Aug 1600 255 6.1 242.0 1.05 013-WIC 1 0.1 Aug 1600 6 0.1 29.0 0.20 014-Bath 1 1.0 Aug 1600 17 0.4 87.0 0.20 101-Garage 1 7.6 Aug 1600 560 13.4 652.0 0.86 102-Mud 1 2.6 Aug 1600 190 4.6 237.0 0.80 103-Powder 1 0.4 Aug 1600 9 0.2 30.0 0.31 104-Office 1 2.5 Aug 1600 179 4.3 190.0 0.94 105-Laundry 1 1.6 Aug 1600 27 0.7 96.0 0.29 106-Kitchen/Dining 1 18.1 Aug 1600 792 19.0 576.0 1.38 107-Living 1 10.0 Aug 1600 606 14.5 558.0 1.09 108-TV Room 1 6.4 Aug 1600 369 8.9 268.0 1.38 109-Powder 1 0.7 Aug 1600 43 1.0 36.0 1.19 110-Master Bed 1 6.6 Aug 1600 403 9.7 210.0 1.92 111-Master Bath 1 3.1 Aug 1600 151 3.6 184.0 0.82 112-Master Closet 1 1.4 Aug 1600 144 3.5 145.0 0.99 Hourly Analysis Program v5.01 Page 2 of 2 ELECTRICAL PERMIT Contractor Information Business Name: ________________________________________ Business Address: ______________________________________ City ______________________ State: _______ Zip: ____________ Contact Name: _________________________________________ Contact Phone: _________________________________________ Contact E-Mail: _________________________________________ I hereby acknowledge that I have read this application, filled out in full the information required, completed an accurate plot plan, and state that all the information as required is correct. I agree to comply with the infor- mation and plot plan, to comply with all Town ordinances and state laws, and to build this structure according to the town's zoning and subdivision codes, design review approved, International Building and Residential Codes and other ordinances of the Town applicable thereto. X ___________________________________________________ Owner/Owner’s Representative Signature (Required) Applicant Information Applicant Name: ________________________________________ Applicant Phone: ________________________________________ Applicant E-Mail: ________________________________________ Additional Authorized ProjectDox Users Full Name: ____________________________________________ E-Mail:________________________________________________ Full Name: ____________________________________________ E-Mail:________________________________________________ Project Street Address: __________ ______________________________ ___________ (Number) (Street) (Suite #) Building/Complex Name: ________________________________ Project Information: Owner Name: __________________________________________ Parcel #_______________________________________________ (For Parcel #, contact Eagle County Assessors Office at (970)328-8640 or visit www.eaglecounty.us/patie) Provide BOTH square footage of area of work AND Valuation (Labor & Materials) Amount of SQ Ft.:__________________________________ Electrical $:_______________________________________ Project #: ________________________________________ Building Permit #: __________________________________ Electrical Permit #: _________________________________ Lot #: ____ Block # ____ Subdivision: __________________ Define Scope and Location of Work: __________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ (use additional sheet if necessary) Work Class: New ( ) Addition ( ) Remodel ( ) Repair ( ) Other ( ) _______________________________________ Type of Building: Single-Family ( ) Duplex ( ) Multi-Family ( ) Commercial ( ) Restaurant ( ) Other ( ) _______________________ Date Received: Includes Temporary Service: ( ) Yes ( ) No Electrical Permit Submittal Requirements Including Heat Tape Installation __Floor plan / Site plan showing proposed work upancy Group listed on plans __Load Calculations and one-line diagram when loads or circuits are being added __Building Type NOTE: For Multi-Family and Commercial buildings—plans and calculations must be prepared by a Colorado Licensed Electrical Engineer Department of Community Development 75 South Frontage Road West Vail, CO 81657 Tel: 970-479-2139 www.vailgov.com For Office Use Only: Fee Paid: _________________________________________ Received From: ____________________________________ Cash _________ Check # ___________ CC: Visa / MC Last 4 CC # _________ Auth # _________ Rev. 2015-Dec 1255 Westhaven Cir. Westhaven LLC and Janie Lipnick 2103 121 06 018/ 2103 121 06 019 TBD Mark Scully/ Vail Custom Builders 970-926-8761 mark@vailcustom.com/ted@vailcustom.com New single family r residence 7104.65 sq/ft 196,492.00 KH Webb Architects/Kyle Webb By cgodfrey at 11:56 am, Mar 20, 2017 B17-0049 E17-0029 Instructions for calculating ELECTRICAL permit fees: The Electrical permit fees listed in this section are mandated by the State of Colorado, Colorado Revised Statute §12-23- 117(3). They are subject to review and adjustment annually. Fees are based on either RESIDENTIAL or ALL OTHER FEES. Do not use both categories to determine your fees. Please note the Town of Vail still requests you list the valua- tion of work on RESIDENTIAL permits as we report on this data. The State of Colorado allows local jurisdictions to charge up to 15% above their mandated fees as listed below. Inspections: Permit fees include TWO inspections only. For ALL additional inspections, including re-inspection for cor- rections issued by the electrical inspector, a $57.50 fee is required. This fee must be paid before any additional inspec- tions will be performed. Construction Use Tax: See formula listed on page 1 in the Building Permit Fees section. Construction use tax will be applied to any electrical permit with a valuation exceeding $10,000 where there is NO building work. Will Call: $5.00 applied to every electrical permit. When calling for your inspection, simply state that you would like “Will Call” and leave the best contact name and number. The inspector will call you on his or her way to your site. Section A. RESIDENTIAL: This fee (based on the enclosed living area only) includes construction of, or remodeling or addition to a single family home, a unit in a duplex, a condominium, or a town house. If you are only providing or changing a service and not wiring any portion on the above, see section ‘B’ on page 5 for correct permit fee. Square Footage for Living Area State Fee TOTAL Fee with 15% added (1) Not more than 1,000 square feet 135.00 155.25 (2) 1,001 square feet and not more than 1,500 square feet 202.00 232.30 (3) 1,501 square feet and not more than 2,000 square feet 270.00 310.50 (4) Per 100 square feet in excess of 2,000 square feet 13.50 15.52 Example: 2235 sq ft home The base fee for 2000 sq ft (of the 2235 sq ft total) is $310.50 (see item (3) above) 310.50 The remaining 235 sq ft is rounded up, per section (4) above, to 300 sq ft (3 x $15.52= $46.56) 46.56 TOTAL $ 357.06 Section B. ALL OTHER FEES including some residential installations that are not based on square footage (not in a living area, i.e. garage, shop, and photovoltaic, etc.). Fees in this section are calculated form the total cost to customer, including electrical materials, items and labor—whether provided by the contractor or the property owner. Use this chart for a service connection, a temporary meter, and all commercial installations. Such fees shall be computed as follows: (See ‘C’ below for the permit fees for a mobile/modular home and travel trailer parks). Valuation of Installation (based on cost to customer of labor, materials and items) State Fee TOTAL Fee with 15% added (1) Not more than $2,000 135.00 155.25 (2) $2,001 and above 13.50 15.52 Example: The cost of the installation is $5,150 (round up to $6,000) The base fee is calculated from section (2) above divided by 1000; 6 x $15.52 = $93.12 93.12 Plus $155.25 155.25 TOTAL $ 248.37 TOTAL Fee with 15% added C. Mobile/Modular home and travel trailer parks, per space 135.00 155.25 D. Re-inspection fee for all of the above 50.00 57.50 E. Add Fee for Extra inspections 50.00 57.50 F. Add Fee for Temporary heat release 67.50 77.63 4 Fee schedule per State of Colorado Fee Schedule: February 15, 2017 02/17/2017 Matt Wadey, P.E. Alpine Civil Engineering PO Box 97 Edwards, CO 81632 Subject: CONSTRUCTION PLAN APPROVAL – 1255 Westhaven Circle-Sewer Main Relocate 2/3/17 Plan Set Dear Mr. Wadey, This letter is to inform you that Construction Plan Approval has been granted for the above-referenced project. The Applicant or designated representative, “Applicant Representative” shall act on Applicants behalf and is responsible for compliance with the District’s Infrastructure Acceptance Procedure requirements. Please provide the following required plan sets indicated in the table below: *Required Plans File Type Contact Email for Contact Construction Plan Set PDF Inspector-Cindy Schmidt cschmidt@erwsd.org Construction Plan Set Auto-CAD .DWG GIS Analyst-Larry Rector lrector@erwsd.org *It is assumed that plans submitted will reflect all requirements as stated in the District specifications for water and sewer lines. Any oversight by the Construction Review Team during the review process shall not be construed as permission to construct anything that does not adhere to the District standard specifications. The District must grant any deviation from the District standard specifications through written approval. Once the required plans indicated above have been received and reviewed by the District, the Project may proceed with Initiation of Construction by scheduling the mandatory Pre-Construction with the District Inspector. The Applicant/ Applicant Representative shall allow a minimum of three business days, prior to scheduling the Pre-Construction meeting with the District Inspector. Upon successful completion of all construction inspections and testing have occurred for the Project the Applicant/ Applicant Representative must submit the following required documents to the District in order to receive Construction Acceptance, start the warranty period, and be eligible for service. DRAWINGS OF RECORD "Field Verified" As-Built drawings in Auto-CAD .DWG and PDF, per the District's specifications, are required. EASEMENT DOCUMENTATION Descriptions of dedicated easements or road right-of-way in which the water main is installed as required. PROJECT COST An accounting of the exact construction cost of the line that the District is being asked to accept. This amount shall only include the cost of design, materials, and installation of the water main. Legal costs are not an eligible cost. BILL OF SALE A document conveying the water main to the District by the developer/owner is required. This document warrants the water main against any and all defects as required. The appropriate Bill of Sale form shall be obtained from the District. Page 2 of 2 The Warranty Period shall not start until Drawings of Record, recorded Easement Documents, Project Cost documents, and Bill of Sale, have been completed, and are received and approved by the District. The Construction Acceptance Letter will be issued once all required submissions have been approved by the Development Review Coordinator. The date of issuance of the letter is the start of the Warranty Period. If you have any questions or concerns, please contact Tug Birk at (970) 477-5449. Sincerely, Tug Birk Development Review Coordinator CC: Mike Thompson Cindy Schmidt Larry Rector Customer Service H-P~KUMAR IGeotechnical EngiJleering IEngineering Geology Materials Testing 1:Environmental 5020 CountyRoad 154 Glenwood Springs, CO 81601 Phone: (970) 945-7988 Fax: (970) 945-8454 Email: hpkglenwood@kumarusa.com June 26, 2017 Office Locations: Parker, Glenwood Springs, and Silverthorne, Colorado Vail Custom Btilders Attn: Mark Scully P. 0 . Box 2809:I,Ec1wards, Color:ado 81632 mark@vailcustom.com Project No. 16-7-586.A Subject:Observation of Excavation, Proposed Lipnick Residence, Lot 45, Glen LyonI, Dear Mark: Subdivision, 1255 Westhaven Circle, Vail, Colorado;' As requested, a representative of H-P/Kumar observed the excavation at the subject site on about eleven visits betweenMay 10 and June 19, 2017 to evaluate the soil conditions exposed for foundation support. The findings of our observations and recommendations are presented in this report. The services were performed in accordance withour agreementfor professional engineering services to Vail Custom Builders, dated May 1, 2017. , We previously:conducted a subsoil study for design of foundations at the site and presented our findings in a report dated December 15, 2016, Project No. 16-7-586. The proposed construction is similar to that discussed in the previous report. The buildinghas been designed to be supported on spread footings sized using an allowable soil bearing pressure of 2,000 psf, as recommended. On May 10, we visited the site to observe two backhoe pits excavated in an existing fill area in the northeastern portion of the proposed residence. At this time, the existing residence on the site had been removed. The pits encountered considerable existingfill with natural coarse granular soils encountered at about elevation8044 to 8046 feet, and no free water. At this time, we recommended the existing fill be removed to bear the footings on the natural coarse granular soils. On May 25, the excavation had initially began in the northern and eastern portion of the proposed resid~nce with the existing fill being encountered that was being removed to below design footing 1bearing elevation. By May 31 and June 5, the excavation continued and was nearing compl~tion with ~onsiderable sub-excavation of old fill needed to achieve suitable granular beating soils at subgrade. On about June 12, stiff gravelly clay soils were observed at below the sub-excavated fill in the southeast portion of the excavation that was sampled and not tested due to the 2 to 3 feet depth of the material subsequently being removed to more suitable bearing soils. The existing fill depth at the site where encountered was up to about 8 feet below design footing bearing elevation in areas. Vail Custom Builders June 26, 2017 , Page2 At the time of bur June 19 site visit, the foundation excavation was essentially complete, including the e~terior footing pad areas, and had been cut in multiple levels from about 3 to 13 feet below the adjacent ground surface. The soils exposed in the bottom of the excavation consisted of relatively dense, silty occasionally clayeysandy gravel to sand and gravel with cobbles and s4ttered boulders. All existing fill and unsuitable natural soils had been removed in the proposed f6oting areas. The results of a gradation analysis performed on a sample of natural coarse granular soils (minus 3-inch fraction) obtained from the site are presented on Figure 1. No free water was encountered in the excavationand the soils were generally moist. In the west- central portion of the excavation, there was about an 8 feet in diameter boulder exposed that extended up a few feet above excavation subgrade but was below planned lower floor level in this area. !: The soil conditions exposed in the excavationare generally consistent with those previously encountered on the site and suitable for support of spread footings designed for the recommended 'allowable bearing pressure of 2,000 psf. Loose and disturbed soils should be removed in the footing areas to expose the undisturbed natural coarse granular soils, and the subgrade compacted. We understand the foundation will be designed to structurally span the exposed boulder which will be done by the structural engineer. Other recommendations presented in o~r previous report which are applicable should also be observed. The recommer'idations submitted in this letter are based on our observation of the soils exposed within the fou~dation excavation and the previous subsurface exploration at the site. Variations in the subsurf~ce conditions belowthe excavation could increase the risk of foundation movement. We should be advised of any variations encountered in the excavation conditions for possible changes to recommendations contained in this letter. Our services do not include determining the presence, prevention or possibilityof mold or other biologicalcontaminants (MOBC) dev~loping in the future. If the client is concerned about MOBC, then a professional in this special fi~~d of practice should be consulted. IIf you have any questions or need further assistance, please call our office. Sincerely, H-P~KUMAR Project No. 16-7-586.A r ' 0wz ~ w0:: 1-zw(.) 0::w0... HYDROMETER ANALYSIS I SIEVE ANALYSIS I I U.S. STANDARD SERIES I CLEAR SQUARE OPENINGS I1. H TIME READINGS 24 HR. 7 R I0 45 MIN.15 MIN. 60MIN19MIN.4 MIN. 1 MIN. #200 #100 #50 #30 3/8" 3/4" 1 1/2" 3" 5" 6"8" 100#16 #8 #4 10 20 30 40 50 60 70 80 90 100 .001 ,. " "" .002 .005 ,.009 019 CLAYTOSILT GRAVEL 33 ~ I uo01DLIMIT·:.., .074 .150 .300 .600 1.18 2.36 4.75 9.5 19.0 37.5 12.5 76.2 152 203127.037 DIAMETER OF PARTICLES IN MILLIMETERS GR.o\VELSAND COBBL.ESCOARSE FiNE COARSEFlNEMEO<UM SAND 45 % SILT AND CLAY 22 % % PLASTICITY INDEX % SAMPLE OF: ;Silty Sand and Gravel FROM: Bottom of Excavation, 5/31/17 90 80 70 60 50 40 30 20 10 0 (;!) zV5(f) <( 0... 1-zw00::w0... 16-7-586.A H-P~I<UMAR GRADATION TEST RESULTS Figure 1 REScheck Software Version 4.6.2 Compliance Certificate Project Lipnick Residence Energy Code: 2015 IECC Location: Vail, Colorado Construction Type: Single-family Project Type: New Construction Conditioned Floor Area: 6,140 ft2 Glazing Area 23% Climate Zone: 6 (9248 HDD) Permit Date: Construction Site: 1255 Westhaven Circle Vail, CO 81657 Owner/Agent: Robert Lipnick 1255 Westhaven Circle Vail, CO 81657 301-938-0585 RNLipnick@gmail.com Designer/Contractor: Heather Barrie K.H. Webb Architects 710 West Lionshead Circle Unit A Vail, CO 81657 970-477-2990 heather@khwebb.com Permit Number: Compliance: Passes using UA trade-off 3.7% Better Than Code Maximum UA: 1166 Your UA: 1123 The % Better or Worse Than Code Index reflects how close to compliance the house is based on code trade-off rules. It DOES NOT provide an estimate of energy use or cost relative to a minimum-code home. Compliance: Envelope Assemblies Assembly Gross Area or Perimeter Cavity R-Value Cont. R-Value U-Factor UA Roof: Flat Ceiling or Scissor Truss 3,399 22.0 27.5 0.020 68 Above Grade Walls: Wood Frame, 16" o.c. 6,912 14.0 10.0 0.043 228 Windows (U=0.29): Wood Frame:Double Pane with Low-E 517 0.290 150 Windows (U=0.39): Wood Frame:Double Pane with Low-E 280 0.390 109 Glass Doors (U=0.29): Glass 323 0.290 94 Glass Doors (U=0.34): Glass 260 0.340 88 Glass Doors (U=0.39): Glass 210 0.390 82 Solid Doors: Solid 29 0.300 9 Below Grade Walls: Solid Concrete or Masonry Wall height: 11.0' Depth below grade: 11.0' Insulation depth: 11.0' 1,979 14.0 10.0 0.031 61 Floor Over Outside: All-Wood Joist/Truss:Over Outside Air 105 38.0 0.0 0.026 3 Slab on Grade: Slab-On-Grade:Heated Insulation depth: 6.0' 337 10.0 0.684 231 Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 1 of10 03/13/17Report date: 3/13/17 Name - Title Signature Date Compliance Statement: The proposed building design described here is consistent with the building plans, specifications, and other calculations submitted with the permit application. The proposed building has been designed to meet the 2015 IECC requirements in REScheck Version 4.6.2 and to comply with the mandatory requirements listed in the REScheck Inspection Checklist. Project Notes: Calcs By: Joey Brenner - Rader Engineering (970)-845-7910 Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 2 of10 03/13/17Report date: Joey Brenner - Mechanical Engineer 3/13/17 Inspection Checklist Requirements: 0.0% were addressed directly in the REScheck software REScheck Software Version 4.6.2 Text in the "Comments/Assumptions" column is provided by the user in the REScheck Requirements screen. For each requirement, the user certifies that a code requirement will be met and how that is documented, or that an exception is being claimed. Where compliance is itemized in a separate table, a reference to that table is provided. Energy Code: 2015 IECC Section # & Req.ID Pre-Inspection/Plan Review Plans Verified Value Field Verified Value Complies? Comments/Assumptions 103.1, 103.2 [PR1]1 Construction drawings and documentation demonstrate energy code compliance for the building envelope. Thermal envelope represented on construction documents. Complies Does Not Not Observable Not Applicable 103.1, 103.2, 403.7 [PR3]1 Construction drawings and documentation demonstrate energy code compliance for lighting and mechanical systems. Systems serving multiple dwelling units must demonstrate compliance with the IECC Commercial Provisions. Complies Does Not Not Observable Not Applicable 302.1, 403.7 [PR2]2 Heating and cooling equipment is sized per ACCA Manual S based on loads calculated per ACCA Manual J or other methods approved by the code official. Heating: Btu/hr_____ Cooling: Btu/hr_____ Heating: Btu/hr_____ Cooling: Btu/hr_____ Complies Does Not Not Observable Not Applicable Additional Comments/Assumptions: 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 3 of10 03/13/17Report date: Section # & Req.ID Foundation Inspection Plans Verified Value Field Verified Value Complies? Comments/Assumptions 402.1.2 [FO1]1 Slab edge insulation R-value. R-_____ Unheated Heated R-_____ Unheated Heated Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 402.1.2 [FO3]1 Slab edge insulation depth/length. _____ ft _____ ft Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 402.1.1 [FO4]1 Conditioned basement wall insulation R-value. Where interior insulation is used, verification may need to occur during Insulation Inspection. Not required in warm-humid locations in Climate Zone 3. R-_____ R-_____ R-_____ R-_____ Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 303.2 [FO5]1 Conditioned basement wall insulation installed per manufacturer’s instructions. Complies Does Not Not Observable Not Applicable 402.2.9 [FO6]1 Conditioned basement wall insulation depth of burial or distance from top of wall. _____ ft _____ ft Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 303.2.1 [FO11]2 A protective covering is installed to protect exposed exterior insulation and extends a minimum of 6 in. below grade. Complies Does Not Not Observable Not Applicable 403.9 [FO12]2 Snow- and ice-melting system controls installed. Complies Does Not Not Observable Not Applicable Additional Comments/Assumptions: 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 4 of10 03/13/17Report date: Section # & Req.ID Framing / Rough-In Inspection Plans Verified Value Field Verified Value Complies? Comments/Assumptions 402.1.1, 402.3.4 [FR1]1 Door U-factor. U-_____ U-_____ Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 402.1.1, 402.3.1, 402.3.3, 402.3.6, 402.5 [FR2]1 Glazing U-factor (area-weighted average). U-_____ U-_____ Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 303.1.3 [FR4]1 U-factors of fenestration products are determined in accordance with the NFRC test procedure or taken from the default table. Complies Does Not Not Observable Not Applicable 402.4.1.1 [FR23]1 Air barrier and thermal barrier installed per manufacturer’s instructions. Complies Does Not Not Observable Not Applicable 402.4.3 [FR20]1 Fenestration that is not site built is listed and labeled as meeting AAMA /WDMA/CSA 101/I.S.2/A440 or has infiltration rates per NFRC 400 that do not exceed code limits. Complies Does Not Not Observable Not Applicable 402.4.5 [FR16]2 IC-rated recessed lighting fixtures sealed at housing/interior finish and labeled to indicate ≤2.0 cfm leakage at 75 Pa. Complies Does Not Not Observable Not Applicable 403.2.1 [FR12]1 Supply and return ducts in attics insulated >= R-8 where duct is >= 3 inches in diameter and >= R-6 where < 3 inches. Supply and return ducts in other portions of the building insulated >= R-6 for diameter >= 3 inches and R-4.2 for < 3 inches in diameter. Complies Does Not Not Observable Not Applicable 403.3.3.5 [FR15]3 Building cavities are not used as ducts or plenums. Complies Does Not Not Observable Not Applicable 403.4 [FR17]2 HVAC piping conveying fluids above 105 ºF or chilled fluids below 55 ºF are insulated to ≥R- 3. R-_____ R-_____ Complies Does Not Not Observable Not Applicable 403.4.1 [FR24]1 Protection of insulation on HVAC piping. Complies Does Not Not Observable Not Applicable 403.5.3 [FR18]2 Hot water pipes are insulated to ≥R-3. R-_____ R-_____ Complies Does Not Not Observable Not Applicable 403.6 [FR19]2 Automatic or gravity dampers are installed on all outdoor air intakes and exhausts. Complies Does Not Not Observable Not Applicable 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 5 of10 03/13/17Report date: Additional Comments/Assumptions: 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 6 of10 03/13/17Report date: Section # & Req.ID Insulation Inspection Plans Verified Value Field Verified Value Complies? Comments/Assumptions 303.1 [IN13]2 All installed insulation is labeled or the installed R-values provided. Complies Does Not Not Observable Not Applicable 402.1.1, 402.2.6 [IN1]1 Floor insulation R-value. R-_____ Wood Steel R-_____ Wood Steel Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 303.2, 402.2.7 [IN2]1 Floor insulation installed per manufacturer’s instructions and in substantial contact with the underside of the subfloor, or floor framing cavity insulation is in contact with the top side of sheathing, or continuous insulation is installed on the underside of floor framing and extends from the bottom to the top of all perimeter floor framing members. Complies Does Not Not Observable Not Applicable 402.1.1, 402.2.5, 402.2.6 [IN3]1 Wall insulation R-value. If this is a mass wall with at least ½ of the wall insulation on the wall exterior, the exterior insulation requirement applies (FR10). R-_____ Wood Mass Steel R-_____ Wood Mass Steel Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 303.2 [IN4]1 Wall insulation is installed per manufacturer’s instructions. Complies Does Not Not Observable Not Applicable Additional Comments/Assumptions: 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 7 of10 03/13/17Report date: Section # & Req.ID Final Inspection Provisions Plans Verified Value Field Verified Value Complies? Comments/Assumptions 402.1.1, 402.2.1, 402.2.2, 402.2.6 [FI1]1 Ceiling insulation R-value. R-_____ Wood Steel R-_____ Wood Steel Complies Does Not Not Observable Not Applicable See the Envelope Assemblies table for values. 303.1.1.1, 303.2 [FI2]1 Ceiling insulation installed per manufacturer’s instructions. Blown insulation marked every 300 ft². Complies Does Not Not Observable Not Applicable 402.2.3 [FI22]2 Vented attics with air permeable insulation include baffle adjacent to soffit and eave vents that extends over insulation. Complies Does Not Not Observable Not Applicable 402.2.4 [FI3]1 Attic access hatch and door insulation ≥R-value of the adjacent assembly. R-_____ R-_____ Complies Does Not Not Observable Not Applicable 402.4.1.2 [FI17]1 Blower door test @ 50 Pa. <=5 ach in Climate Zones 1-2, and <=3 ach in Climate Zones 3-8. ACH 50 =_____ ACH 50 =_____ Complies Does Not Not Observable Not Applicable 403.2.3 [FI4]1 Duct tightness test result of <=4 cfm/100 ft2 across the system or <=3 cfm/100 ft2 without air handler @ 25 Pa. For rough-in tests, verification may need to occur during Framing Inspection. _____ cfm/100 ft2 _____ cfm/100 ft2 Complies Does Not Not Observable Not Applicable 403.3.2 [FI27]1 Ducts are pressure tested to determine air leakage with either: Rough-in test: Total leakage measured with a pressure differential of 0.1 inch w.g. across the system including the manufacturer’s air handler enclosure if installed at time of test. Postconstruction test: Total leakage measured with a pressure differential of 0.1 inch w.g. across the entire system including the manufacturer’s air handler enclosure. _____ cfm/100 ft2 _____ cfm/100 ft2 Complies Does Not Not Observable Not Applicable 403.3.2.1 [FI24]1 Air handler leakage designated by manufacturer at <=2% of design air flow. Complies Does Not Not Observable Not Applicable 403.1.1 [FI9]2 Programmable thermostats installed for control of primary heating and cooling systems and initially set by manufacturer to code specifications. Complies Does Not Not Observable Not Applicable 403.1.2 [FI10]2 Heat pump thermostat installed on heat pumps. Complies Does Not Not Observable Not Applicable 403.5.1 [FI11]2 Circulating service hot water systems have automatic or accessible manual controls. Complies Does Not Not Observable Not Applicable 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 8 of10 03/13/17Report date: Section # & Req.ID Final Inspection Provisions Plans Verified Value Field Verified Value Complies? Comments/Assumptions 403.6.1 [FI25]2 All mechanical ventilation system fans not part of tested and listed HVAC equipment meet efficacy and air flow limits. Complies Does Not Not Observable Not Applicable 403.2 [FI26]2 Hot water boilers supplying heat through one- or two-pipe heating systems have outdoor setback control to lower boiler water temperature based on outdoor temperature. Complies Does Not Not Observable Not Applicable 403.5.1.1 [FI28]2 Heated water circulation systems have a circulation pump. The system return pipe is a dedicated return pipe or a cold water supply pipe. Gravity and thermos- syphon circulation systems are not present. Controls for circulating hot water system pumps start the pump with signal for hot water demand within the occupancy. Controls automatically turn off the pump when water is in circulation loop is at set-point temperature and no demand for hot water exists. Complies Does Not Not Observable Not Applicable 403.5.1.2 [FI29]2 Electric heat trace systems comply with IEEE 515.1 or UL 515. Controls automatically adjust the energy input to the heat tracing to maintain the desired water temperature in the piping. Complies Does Not Not Observable Not Applicable 403.5.2 [FI30]2 Water distribution systems that have recirculation pumps that pump water from a heated water supply pipe back to the heated water source through a cold water supply pipe have a demand recirculation water system. Pumps have controls that manage operation of the pump and limit the temperature of the water entering the cold water piping to 104ºF. Complies Does Not Not Observable Not Applicable 403.5.4 [FI31]2 Drain water heat recovery units tested in accordance with CSA B55.1. Potable water-side pressure loss of drain water heat recovery units < 3 psi for individual units connected to one or two showers. Potable water- side pressure loss of drain water heat recovery units < 2 psi for individual units connected to three or more showers. Complies Does Not Not Observable Not Applicable 404.1 [FI6]1 75% of lamps in permanent fixtures or 75% of permanent fixtures have high efficacy lamps. Does not apply to low-voltage lighting. Complies Does Not Not Observable Not Applicable 404.1.1 [FI23]3 Fuel gas lighting systems have no continuous pilot light. Complies Does Not Not Observable Not Applicable 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 9 of10 03/13/17Report date: Section # & Req.ID Final Inspection Provisions Plans Verified Value Field Verified Value Complies? Comments/Assumptions 401.3 [FI7]2 Compliance certificate posted. Complies Does Not Not Observable Not Applicable 303.3 [FI18]3 Manufacturer manuals for mechanical and water heating systems have been provided. Complies Does Not Not Observable Not Applicable Additional Comments/Assumptions: 1 High Impact (Tier 1) 2 Medium Impact (Tier 2) 3 Low Impact (Tier 3) Project Title: Lipnick Residence Data filename: J:\Jobs\2016 - Jobs\16090.00 - Lipnick Residence\Mechanical\Calculations\Rescheck\16090-Rescheck.rck Page 10 of10 03/13/17Report date: 2015 IECC Energy Efficiency Certificate Insulation Rating R-Value 24.00Above-Grade Wall 24.00Below-Grade Wall 10.00Floor 49.50Ceiling / Roof _______Ductwork (unconditioned spaces): Glass & Door Rating SHGCU-Factor 0.29Window 0.29Door Heating & Cooling Equipment Efficiency _______Heating System:_________________________ _______Cooling System:_________________________ _______Water Heater:___________________________ Name: Date: Comments