Loading...
HomeMy WebLinkAboutAsbestos Test Results.pdfSanAir Technologies LaboratorySanAir Technologies Laboratory Analysis Report prepared for True Perspective Home Consultants Report Date: 10/20/2017 Project Name: 415 East Lionshead Circle SanAir ID#: 17042239 804.897.1177 www.sanair.com804.897.1177 www.sanair.com Page 1 of 6 SanAir Technologies Laboratory, Inc. 1551 Oakbridge Drive, Suite B, Powhatan, VA 23139 804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070 Web: http://www.sanair.com E-mail: iaq@sanair.com True Perspective Home Consultants PO Box 2096 Edwards, CO 81632 October 20, 2017 SanAir ID #17042239 Project Name:415 East Lionshead Circle Project Number: Dear Ron Amass, We at SanAir would like to thank you for the work you recently submitted. The 5 sample(s) were received on Friday, October 20, 2017 via FedEx. The final report(s) is enclosed for the following sample(s): 1, 2, 3, 4, 5. These results only pertain to this job and should not be used in the interpretation of any other job. This report is only complete in its entirety. Refer to the listing below of the pages included in a complete final report. Sincerely, Sandra Sobrino Asbestos & Materials Laboratory Manager SanAir Technologies Laboratory Final Report Includes: - Cover Letter - Analysis Pages - Disclaimers and Additional Information sample conditions: 5 sample(s) in Good condition Page 2 of 6 SanAir Technologies Laboratory, Inc. 1551 Oakbridge Drive, Suite B, Powhatan, VA 23139 804.897.1177 Toll Free: 888.895.1177 Fax: 804.897.0070 Web: http://www.sanair.com E-mail: iaq@sanair.com Name: Address: True Perspective Home Consultants PO Box 2096 Edwards, CO 81632 Project Number: P.O. Number: Project Name:415 East Lionshead Circle Collected Date: Received Date: Report Date: Analyst: 10/19/2017 10/20/2017 9:25:00 AM 10/20/2017 11:38:27 AM Tallert, Jonathan Asbestos Bulk PLM EPA 600/R-93/116 Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 1 / 17042239-001 White 5% Cellulose 95% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Drywall Homogeneous 1 / 17042239-001 White 100% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Texture Homogeneous Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 2 / 17042239-002 White 5% Cellulose 95% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Drywall Homogeneous 2 / 17042239-002 White 100% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Texture Homogeneous Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 3 / 17042239-003 White 5% Cellulose 95% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Drywall Homogeneous 3 / 17042239-003 White 100% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Texture Homogeneous Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 4 / 17042239-004 White 5% Cellulose 95% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Drywall Homogeneous 4 / 17042239-004 White 100% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Texture Homogeneous Stereoscopic Components Asbestos SanAir ID / Description Appearance % Fibrous % Non-Fibrous Fibers 5 / 17042239-005 White 5% Cellulose 95% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Drywall Homogeneous 5 / 17042239-005 White 100% Other None Detected Ceiling Drywall And Texture,Non-Fibrous Texture Homogeneous 17042239 SanAir ID Number FINAL REPORT Certification Analyst:Approved Signatory: Analysis Date:10/20/2017 Date:10/20/2017 Page 3 of 6 Disclaimer The final report cannot be reproduced, except in full, without written authorization from SanAir. Fibers smaller than 5 microns cannot be seen with this method due to scope limitations. The accuracy of the results is dependent upon the client’s sampling procedure and information provided to the laboratory by the client. SanAir assumes no responsibility for the sampling procedure and will provide evaluation reports based solely on the sample and information provided by the client. This report may not be used by the client to claim product endorsement by NVLAP or any other agency of the U.S. government. For NY state samples, method EPA 600/M4-82-020 is performed. Polarized- light microscopy is not consistently reliable in detecting asbestos in floor covering and similar non-friable organically bound materials. Quantitative transmission electron microscopy is currently the only method that can be used to determine if this material can be considered or treated as non-asbestos containing. NY ELAP lab ID 11983 Page 4 of 6 Page 5 of 6 Page 6 of 6