Loading...
HomeMy WebLinkAboutDRB18-0165_Approved Documents_1527800678.pdfACTION FORM Design Review Board (DRB) Department of Community Development 75 South Frontage Road West Vail, CO 81657 Tel: 970-479-2139 www.vailgov.com Project Name: MRW 540 LP 2018 Application Number: DRB18-0165 Application Type: Addition Date Applied: 05/02/2018 Project Description: Replacement of existing windows and exterior doors that are approved by the Association. Extension of existing deck 5' to the south. Moving existing wall 3 1/2' out into existing deck, which is over existing living space, to increase the dining room area. Raising an existing beam over the deck 12" to allow for a better view from the dining room. These changes will be in harmony with the planned renovation of the exterior of the building now in progress. CONTACTS Contact Type: Applicant Full Name: Reslock and Sullivan LLC (William Reslock) Address: 1582 Prouty Drive Evergreen, CO 80439 Phone: 3039173733 Contact Type: Property Owner Full Name: MRW 540 LP MRS CAROL H MURPHY Address: Phone: None Contact Type: Property Owner Full Name: Steve and Carol Fricks Address: Phone: 9708274089 Project Address: 4770 BIGHORN RD 2N (210112424047 2N) (210112424047) Job Site Location: 2N Legal Description: Subdivision: RACQUET CLUB TOWNHOMES Lot: No Data Block:No Data Parcel Number: 210112424047 BOARDS/STAFF ACTION Motion By: Action: Staff Approved Second By: Vote: Date: 05/31/2018 Conditions: - Approval of this project shall lapse and become void one (1) year following the date of final approval, unless a building permit is issued and construction is commenced and is diligently pursued toward completion. - Design Review Board approval does not constitute a permit for building. Please consult with Town of Vail building personnel prior to construction activities. - Design Review Board approval shall not become valid for 20 days following the date of approval, pursuant to the Vail Town Code, Chapter 12-3-3 Appeals. - No changes to these plans maybe made without the written consent of Town of Vail staff and/or the appropriate review committee(s). - Applicant shall vegetate all disturbed soils with grass seed, sod, or mulch. Planner: Justin Lightfield DRB APPROVED 5/31/2018 12:00:00 AM DRB APPROVED 5/31/2018 12:00:00 AM PLANNING FEE RECEIPT Case # DRB18-0165 Date Printed: 05/07/2018 TOWN OF VAIL - FEES RECEIPT Planning Summary Type: Design Review Board (DRB) Submittal Date: 05/02/2018 Subcases: Addition Bond Expire Date: Description of Work: Replacement of existing windows and exterior doors that are approved by the Association. Extension of existing deck 5' to the south. Moving existing wall 3 1/2' out into existing deck, which is over existing living space, to increase the dining room area. Raising an existing beam over the deck 12" to allow for a better view from the dining room. These changes will be in harmony with the planned renovation of the exterior of the building now in progress. Property Information Address: 4770 BIGHORN RD 2N (210112424047 2N) Tax ID: 210112424047 Owner: MRW 540 LP MRS CAROL H MURPHY Contacts Contact Type: Applicant Company Name: Reslock and Sullivan LLC Full Name: William Reslock Address: 1582 Prouty Drive Evergreen, CO 80439 Email: bill@reslocksullivan.com Contact Type: Property Owner Full Name: MRW 540 LP MRS CAROL H MURPHY Address: Contact Type: Property Owner Full Name: Steve and Carol Fricks Address: Email: gerard@heidremodeling.com Planning Fees Fee Information Account Amount Addition Fee 001-0000.31122.00 $300.00 Payment Information Date Paid Payment Type Amount Addition Fee 05/07/2018 Credit Card $300.00 Paid By: - Notes: Visa - William F Reslock FEE TOTAL $300.00 AMOUNT PAID $300.00 BALANCE DUE $0.00 05/07/2018 - 9:35:22 AM - Generated by: dcouch75 South Frontage Road West, Vail, Colorado 81657 1 / 1 DRB APPROVED5/31/2018 12:00:00 AM Stewart Title Company 97 Main St, Ste W-201 Edwards, CO 81632 Date: May 8, 2018 File Number: 210274 Property Address: 4770 Bighorn Road, Vail, CO 81657 Buyer/Borrower: tbd tbd tbd tbd Delivery Method: Emailed MRW 540 LP Delivery Method: Emailed WIRED FUNDS ARE REQUIRED ON ALL CASH PURCHASE TRANSACTIONS. PLEASE FEEL FREE TO CONTACT THE ESCROW OFFICE AS NOTED ABOVE. We Appreciate Your Business and Look Forward to Serving You in the Future. DRB APPROVED 5/31/2018 12:00:00 AM This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 1 of 3 ALTA COMMITMENT FOR TITLE INSURANCE ISSUED BY STEWART TITLE GUARANTY COMPANY NOTICE IMPORTANT - READ CAREFULLY: THIS COMMITMENT IS AN OFFER TO ISSUE ONE OR MORE TITLE INSURANCE POLICIES. ALL CLAIMS OR REMEDIES SOUGHT AGAINST THE COMPANY INVOLVING THE CONTENT OF THIS COMMITMENT OR THE POLICY MUST BE BASED SOLELY IN CONTRACT. THIS COMMITMENT IS NOT AN ABSTRACT OF TITLE, REPORT OF THE CONDITION OF TITLE, LEGAL OPINION, OPINION OF TITLE, OR OTHER REPRESENTATION OF THE STATUS OF TITLE. THE PROCEDURES USED BY THE COMPANY TO DETERMINE INSURABILITY OF THE TITLE, INCLUDING ANY SEARCH AND EXAMINATION, ARE PROPRIETARY TO THE COMPANY, WERE PERFORMED SOLELY FOR THE BENEFIT OF THE COMPANY, AND CREATE NO EXTRACONTRACTUAL LIABILITY TO ANY PERSON, INCLUDING A PROPOSED INSURED. THE COMPANY’S OBLIGATION UNDER THIS COMMITMENT IS TO ISSUE A POLICY TO A PROPOSED INSURED IDENTIFIED IN SCHEDULE A IN ACCORDANCE WITH THE TERMS AND PROVISIONS OF THIS COMMITMENT. THE COMPANY HAS NO LIABILITY OR OBLIGATION INVOLVING THE CONTENT OF THIS COMMITMENT TO ANY OTHER PERSON. COMMITMENT TO ISSUE POLICY Subject to the Notice; Schedule B, Part I - Requirements; Schedule B, Part II - Exceptions; and the Commitment Conditions, STEWART TITLE GUARANTY COMPANY, a Texas corporation (the “Company”), commits to issue the Policy according to the terms and provisions of this Commitment. This Commitment is effective as of the Commitment Date shown in Schedule A for each Policy described in Schedule A, only when the Company has entered in Schedule A both the specified dollar amount as the Proposed Policy Amount and the name of the Proposed Insured. If all of the Schedule B, Part I - Requirements have not been met within six months after the Commitment Date, this Commitment terminates and the Company’s liability and obligation end. Stewart Title Company 97 Main St, Ste W-201 Edwards, CO 81632 For purposes of this form the “Stewart Title” logo featured above is the represented logo for the underwriter, Stewart Title Guaranty Company. DRB APPROVED 5/31/2018 12:00:00 AM This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 2 of 3 COMMITMENT CONDITIONS 1. DEFINITIONS (a) “Knowledge” or “Known”: Actual or imputed knowledge, but not constructive notice imparted by the Public Records. (b) “Land”: The land described in Schedule A and affixed improvements that by law constitute real property. The term “Land” does not include any property beyond the lines of the area described in Schedule A, nor any right, title, interest, estate, or easement in abutting streets, roads, avenues, alleys, lanes, ways, or waterways, but this does not modify or limit the extent that a right of access to and from the Land is to be insured by the Policy. (c) “Mortgage”: A mortgage, deed of trust, or other security instrument, including one evidenced by electronic means authorized by law. (d) “Policy”: Each contract of title insurance, in a form adopted by the American Land Title Association, issued or to be issued by the Company pursuant to this Commitment. (e) “Proposed Insured”: Each person identified in Schedule A as the Proposed Insured of each Policy to be issued pursuant to this Commitment. (f) “Proposed Policy Amount”: Each dollar amount specified in Schedule A as the Proposed Policy Amount of each Policy to be issued pursuant to this Commitment. (g) “Public Records”: Records established under state statutes at the Commitment Date for the purpose of imparting constructive notice of matters relating to real property to purchasers for value and without Knowledge. (h) “Title”: The estate or interest described in Schedule A. 2. If all of the Schedule B, Part I - Requirements have not been met within the time period specified in the Commitment to Issue Policy, this Commitment terminates and the Company’s liability and obligation end. 3. The Company’s liability and obligation is limited by and this Commitment is not valid without: (a) the Notice; (b) the Commitment to Issue Policy; (c) the Commitment Conditions; (d) Schedule A; (e) Schedule B, Part I - Requirements; (f) Schedule B, Part II - Exceptions; and (g) a countersignature by the Company or its issuing agent that may be in electronic form. 4. COMPANY’S RIGHT TO AMEND The Company may amend this Commitment at any time. If the Company amends this Commitment to add a defect, lien, encumbrance, adverse claim, or other matter recorded in the Public Records prior to the Commitment Date, any liability of the Company is limited by Commitment Condition 5. The Company shall not be liable for any other amendment to this Commitment. 5. LIMITATIONS OF LIABILITY (a) The Company’s liability under Commitment Condition 4 is limited to the Proposed Insured’s actual expense incurred in the interval between the Company’s delivery to the Proposed Insured of the Commitment and the delivery of the amended Commitment, resulting from the Proposed Insured’s good faith reliance to: (i) comply with the Schedule B, Part I - Requirements; (ii) eliminate, with the Company’s written consent, any Schedule B, Part II - Exceptions; or (iii) acquire the Title or create the Mortgage covered by this Commitment. (b) The Company shall not be liable under Commitment Condition 5(a) if the Proposed Insured requested the amendment or had Knowledge of the matter and did not notify the Company about it in writing. (c) The Company will only have liability under Commitment Condition 4 if the Proposed Insured would not have incurred the expense had the Commitment included the added matter when the Commitment was first delivered to the Proposed Insured. DRB APPROVED 5/31/2018 12:00:00 AM This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 3 of 3 (d) The Company’s liability shall not exceed the lesser of the Proposed Insured’s actual expense incurred in good faith and described in Commitment Conditions 5(a)(i) through 5(a)(iii) or the Proposed Policy Amount. (e) The Company shall not be liable for the content of the Transaction Identification Data, if any. (f) In no event shall the Company be obligated to issue the Policy referred to in this Commitment unless all of the Schedule B, Part I - Requirements have been met to the satisfaction of the Company. (g) In any event, the Company’s liability is limited by the terms and provisions of the Policy. 6. LIABILITY OF THE COMPANY MUST BE BASED ON THIS COMMITMENT (a) Only a Proposed Insured identified in Schedule A, and no other person, may make a claim under this Commitment. (b) Any claim must be based in contract and must be restricted solely to the terms and provisions of this Commitment. (c) Until the Policy is issued, this Commitment, as last revised, is the exclusive and entire agreement between the parties with respect to the subject matter of this Commitment and supersedes all prior commitment negotiations, representations, and proposals of any kind, whether written or oral, express or implied, relating to the subject matter of this Commitment. (d) The deletion or modification of any Schedule B, Part II - Exception does not constitute an agreement or obligation to provide coverage beyond the terms and provisions of this Commitment or the Policy. (e) Any amendment or endorsement to this Commitment must be in writing and authenticated by a person authorized by the Company. (f) When the Policy is issued, all liability and obligation under this Commitment will end and the Company’s only liability will be under the Policy. 7. IF THIS COMMITMENT HAS BEEN ISSUED BY AN ISSUING AGENT The issuing agent is the Company’s agent only for the limited purpose of issuing title insurance commitments and policies. The issuing agent is not the Company’s agent for the purpose of providing closing or settlement services. 8. PRO-FORMA POLICY The Company may provide, at the request of a Proposed Insured, a pro-forma policy illustrating the coverage that the Company may provide. A pro-forma policy neither reflects the status of Title at the time that the pro-forma policy is delivered to a Proposed Insured, nor is it a commitment to insure. 9. ARBITRATION The Policy contains an arbitration clause. All arbitrable matters when the Proposed Policy Amount is $2,000,000 or less shall be arbitrated at the option of either the Company or the Proposed Insured as the exclusive remedy of the parties. A Proposed Insured may review a copy of the arbitration rules at <http://www.alta.org/arbitration>. STEWART TITLE GUARANTY COMPANY All notices required to be given the Company and any statement in writing required to be furnished the Company shall be addressed to it at P.O. Box 2029, Houston, Texas 77252-2029. DRB APPROVED 5/31/2018 12:00:00 AM ALTA COMMITMENT FOR TITLE INSURANCE SCHEDULE A ISSUED BY STEWART TITLE GUARANTY COMPANY This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 1 of 6 Transaction Identification Data for reference only: Issuing Agent: Stewart Title Company Issuing Office: 97 Main St, Ste W-201, Edwards, CO 81632 ALTA® Universal ID: Loan ID Number: Commitment Number: 210274 Issuing Office File Number: 210274 Property Address: 4770 Bighorn Road, Vail, CO 81657 Revision Number: 1. Commitment Date: May 2, 2018 at 8:00AM 2. Policy to be issued: Proposed Policy Amount (a) ALTA Owner’s Standard Proposed Insured: tbd tbd (b) ALTA Loan Proposed Insured: 3. The estate or interest in the Land described or referred to in this Commitment is: FEE SIMPLE 4. Title to the said estate or interest in the Land is at the Commitment Date vested in: MRW 540 Limited Partnership, a Colorado limited partnership now known as MRW 540, LLLP, a Colorado limited liability limited partnership 5. The Land is described as follows: See Exhibit “A” Attached Hereto DRB APPROVED 5/31/2018 12:00:00 AM ALTA COMMITMENT FOR TITLE INSURANCE EXHIBIT “A” LEGAL DESCRIPTION ISSUED BY STEWART TITLE GUARANTY COMPANY This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 2 of 6 File No.: 210274 Condominium Unit No. 2 Of Building N of RACQUET CLUB TOWNHOMES, According to the Eighth, Ninth and Tenth Supplement to Map of Racquet Club Townhomes recorded April 12, 1984 in Book 383 at Page 23 as Reception No. 279329, and as described in the Condominium Declaration recorded January 9, 1980 in Book 297 at Page 170 as Reception No. 193562, and Tenth Supplement recorded April 12, 1984 in Book 383 at Page 28 as Reception No. 279334. COUNTY OF EAGLE, STATE OF COLORADO DRB APPROVED 5/31/2018 12:00:00 AM ALTA COMMITMENT FOR TITLE INSURANCE SCHEDULE B PART I ISSUED BY STEWART TITLE GUARANTY COMPANY This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 3 of 6 File No.: 210274 Requirements All of the following Requirements must be met: 1. The Proposed Insured must notify the Company in writing of the name of any party not referred to in this Commitment who will obtain an interest in the Land or who will make a loan on the Land. The Company may then make additional Requirements or Exceptions. 2. Pay the agreed amount for the estate or interest to be insured. 3. Pay the premiums, fees, and charges for the Policy to the Company. 4. Documents satisfactory to the Company that convey the Title or create the Mortgage to be insured, or both, must be properly authorized, executed, delivered, and recorded in the Public Records. 5. Payment to or for the account of the grantor(s) or mortgagor(s) of the full consideration for the estate or interest to be insured. 6. Proper instrument(s) creating the estate or interest to be insured must be executed and duly filed for record. 7. Evidence satisfactory to Stewart Title Guaranty Company of payment of all outstanding taxes and assessments as certified by the County Treasurer. 8. Execution of Affidavit as to Debts and Liens and its return to Stewart Title Guaranty Company. NOTE: If work has been performed on, or in connection with, the subject property (architectural drawings, soils testing, foundation work, installation of materials), please notify the Company's escrow officer within 10 days of receipt of this title commitment. 9. Evidence satisfactory to Stewart Title Guaranty Company that the real estate transfer tax assessed by the Town of Vail has been paid or that the transaction is exempt from said tax. 10. Compliance with the Right of First Refusal as set forth in the Condominium Declaration of Racquet Club Townhomes and Certificate from Racquet Club Townhomes Association verifying that such compliance has been performed 11. Payment of any and all Condominium assessments and expenses as required by the Condominium Declaration of Racquet Club Townhomes and Certificate from Racquet Club Townhomes Condominium Association verifying that such payment has been received. 12. Relating to MRW 540, LLLP, a Colorado limited liability limited partnership, The Company requires the following: a) A copy of the limited partnership agreement, and all amendments thereto Note: The Company requires the joinder of all general partners and evidence of the consent of all of DRB APPROVED 5/31/2018 12:00:00 AM ALTA COMMITMENT FOR TITLE INSURANCE SCHEDULE B PART I ISSUED BY STEWART TITLE GUARANTY COMPANY This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 4 of 6 the limited partners to the closing of this transaction, where appropriate. Note: At the time the Company is furnished these items, the Company may make additional requirements or exceptions. 13. Release by the Public Trustee of the Deed of Trust from MRW 540 LLLP, a Colorado limited liability limited partnership for the use of Firstbank to secure $300,000.00, recorded November 15, 2017, as Reception No. 201721882 . 14. Deed from vested owner(s) vesting fee simple title in the purchaser(s). NOTE: Statement of Authority for MRW 540 Limited Partnership, a Colorado limited partnership now known as MRW 540, LLLP, a Colorado limited liability limited partnership recorded November 15, 2017 as Reception No. 201721881, discloses the following persons as those authorized to transact business on behalf of said entity: Carol Hadley Fricks, General Partner If there have been any amendments or changes to the management of the entity, written documentation reflecting the changes and a new Statement of Authority will be required. NOTE: Notation of the legal address of the grantee must appear on the deed as per 1976 amendment to statute on recording of deeds CRS 38-35-109 (2). NOTE: The vesting deed is shown as follows: Warranty Deed recorded November 18, 2005, as Reception No. 937479. NOTE: This product is for informational purposes only. It is not a title insurance product and does not provide any form of coverage. This product is not a guarantee or assurance and does not warrant, or otherwise insure any condition, fact or circumstance. This product does not obligate this Company to issue any policies of title insurance for any subsequent transaction based on the information provided or involving the property described herein. This Company’s sole liability for any error(s)relating to this product is limited to the amount that was paid for this product. DRB APPROVED 5/31/2018 12:00:00 AM ALTA COMMITMENT FOR TITLE INSURANCE SCHEDULE B PART II ISSUED BY STEWART TITLE GUARANTY COMPANY This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 5 of 6 Exceptions File No.: 210274 THIS COMMITMENT DOES NOT REPUBLISH ANY COVENANT, CONDITION, RESTRICTION, OR LIMITATION CONTAINED IN ANY DOCUMENT REFERRED TO IN THIS COMMITMENT TO THE EXTENT THAT THE SPECIFIC COVENANT, CONDITION, RESTRICTION, OR LIMITATION VIOLATES STATE OR FEDERAL LAW BASED ON RACE, COLOR, RELIGION, SEX, SEXUAL ORIENTATION, GENDER IDENTITY, HANDICAP, FAMILIAL STATUS, OR NATIONAL ORIGIN. The Policy will not insure against loss or damage resulting from the terms and provisions of any lease or easement identified in Schedule A, and will include the following Exceptions unless cleared to the satisfaction of the Company: 1. Any defect, lien, encumbrance, adverse claim, or other matter that appears for the first time in the Public Records or is created, attaches, or is disclosed between the Commitment Date and the date on which all of the Schedule B, Part I - Requirements are met. 2. Rights or claims of parties in possession, not shown by the public records. 3. Easements, or claims of easements, not shown by the public records. 4. Any encroachment, encumbrance, violation, variation, or adverse circumstance affecting the title that would be disclosed by an accurate and complete land survey of the Land and not shown by the public records. 5. Any lien, or right to a lien, for services, labor or material heretofore or hereafter furnished, imposed by law and not shown by the public records. 6. (a) Unpatented mining claims; (b) reservations or exceptions in patents or in Acts authorizing the issuance thereof; (c) Minerals of whatsoever kind, subsurface and surface substances, in, on, under and that may be produced from the Land, together with all rights, privileges, and immunities relating thereto, whether or not the matters excepted under (a), (b) or (c) are shown by the Public Records or listed in Schedule B. 7. Water rights, claims or title to water. 8. Any and all unpaid taxes and assessments and any unredeemed tax sales. 9. The effect of inclusions in any general or specific water conservancy, fire protection, soil conservation or other district or inclusion in any water service or street improvement area. 10. Reservations and exceptions in Patents, or Acts authorizing the issuance thereof, including the reservation of the right of proprietor of a vein or lode to extract and remove his ore therefrom should the same be found to penetrate or intersect the premises as reserved in United States Patent recorded September 13, 1902 in Book 48 at Page 491 , and on November 17, 1902 in Book 48 at Page 492 . DRB APPROVED 5/31/2018 12:00:00 AM ALTA COMMITMENT FOR TITLE INSURANCE SCHEDULE B PART II ISSUED BY STEWART TITLE GUARANTY COMPANY This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 Page 6 of 6 11. All matters as shown on the Map of Racquet Club Townhomes recorded in Book 319 at Page 932 as Reception No. 216302 and the Eighth, Ninth and Tenth Supplement to Map of Racquet Club Townhomes recorded April 12, 1984 in Book 383 at Page 23 as Reception No. 279329. 12. Condominium Declaration for Racquet Club Townhomes, recorded recorded January 9, 1980 in Book 297 at Page 170 as Reception No. 193562 and Supplements recorded March 13, 1981 in Book 319 at Page 933 as Reception No. 216303 and in Book 319 at Page 934 as Reception No. 216304 and Tenth Supplement recorded April 12, 1984 in Book 383 at Page 28 as Reception No. 279334, and any and all Supplements thereto. 13. Easement, affecting the common areas recorded as follows: May 28, 1982 in Book 341 at Pages 23 and 24 as Reception Nos. 237371 and 237372 and recorded September 5, 1985 in Book 424 at Pages 270 and 271 as Reception Nos. 320535 and 320536 , for purposes stated therein. 14. Easement Grant by Vail Racquet Club Townhomes, a general partnership recorded March 13, 1981 in Book 319 at Page 936 as Reception No. 216306 and Easement Grant by Vail Racquet Club Townhomes, a general partnership recorded March 13, 1981 in Book 319 at Page 937 as Reception No. 216307 , for purposes stated therein. 15. Easement Grant - VRCT #5A recorded April 12, 1984 in Book 383 at Page 24 as Reception No. 279330. 16. Easement Grant - VRCT #5B recorded April 12, 1984 in Book 383 at Page 25 as Reception No. 279331. 17. Any and all existing leases and tenancies. DRB APPROVED 5/31/2018 12:00:00 AM ALTA COMMITMENT FOR TITLE INSURANCE ISSUED BY STEWART TITLE GUARANTY COMPANY This page is only a part of a 2016 ALTA® Commitment for Title Insurance. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I - Requirements; and Schedule B, Part II - Exceptions; and a countersignature by the Company or its issuing agent that may be in electronic form. Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. File No.: 210274 ALTA Commitment For Title Insurance 8-1-16 File No.: 210274 STATEMENT OF CHARGES These charges are due and payable before a policy can be issued: Rate TBD Commitment: $300.00 DRB APPROVED 5/31/2018 12:00:00 AM DISCLOSURES File No.: 210274 Pursuant to C.R.S. 10-11-122, notice is hereby given that: A. THE SUBJECT REAL PROPERTY MAY BE LOCATED IN A SPECIAL TAXING DISTRICT; B. A CERTIFICATE OF TAXES DUE LISTING EACH TAXING JURISDICTION SHALL BE OBTAINED FROM THE COUNTY TREASURER OR THE COUNTY TREASURER’S AUTHORIZED AGENT; C. INFORMATION REGARDING SPECIAL DISTRICTS AND THE BOUNDARIES OF SUCH DISTRICTS MAY BE OBTAINED FROM THE BOARD OF COUNTY COMMISSIONERS, THE COUNTY CLERK AND RECORDER, OR THE COUNTY ASSESSOR Note: Colorado Division of Insurance Regulations 8-1-2, Section 5, Paragraph G requires that “Every title entity shall be responsible for all matters which appear of record prior to the time of recording whenever the title entity conducts the closing and is responsible for recording or filing of legal documents resulting from the transaction which was closed.” Provided that Stewart Title Company conducts the closing of the insured transaction and is responsible for recording the legal documents from the transaction, exception number 5 will not appear on the Owner’s Title Policy and the Lender’s Title Pol icy when issue d. Note: Affirmative Mechanic’s Lien Protection for the Owner may be available (typically by deletion of Exception No. 4 of Schedule B, Section 2 of the Commitment from the Owner’s Policy to be issued) upon compliance with the following conditions: A. The land described in Schedule A of this commitment must be a single-family residence, which includes a condominium or townhouse unit. B. No labor or materials have been furnished by mechanics or materialmen for purposes of construction on the land described in Schedule A of this Commitment within the past 6 months. C. The Company must receive an appropriate affidavit indemnifying the Company against unfiled Mechanic’s and Materialmen’s Liens. D. The Company must receive payment of the appropriate premium. E. If there has been construction, improvements or major repairs undertaken on the property to be purchased, within six months prior to the Date of the Commitment, the requirements to obtain coverage for unrecorded liens will include: disclosure of certain construction information; financial information as to the seller, the builder and/or the contractor; payment of the appropriate premium; fully executed Indemnity agreements satisfactory to the company; and, any additional requirements as may be necessary after an examination of the aforesaid information by the Company. No coverage will be given under any circumstances for labor or material for which the insured has contracted for or agreed to pay. To comply with the provisions of C.R.S. 10-11-123, the Company makes the following disclosure: a. That there is recorded evidence that a mineral estate has been severed, leased or otherwise conveyed from the surface estate and that there is a substantial likelihood that a third party holds some or all interest in oil, gas, other minerals, or geothermal energy in the property; and b. That such mineral estate may include the right to enter and use the property without the surface owner’s permission. NOTE: THIS DISCLOSURE APPLIES ONLY IF SCHEDULE B, SECTION 2 OF THE TITLE COMMITMENT HEREIN INCLUDES AN EXCEPTION FOR SEVERED MINERALS. Notice of Availability of a Closing Protection Letter: Pursuant to Colorado Division of Insurance Regulation 8-1-3, Section 5, Paragraph C (11)(f), a closing protection letter is available to the consumer. NOTHING HEREIN CONTAINED WILL BE DEEMED TO OBLIGATE THE COMPANY TO PROVIDE ANY OF THE COVERAGES REFERRED TO HEREIN, UNLESS THE ABOVE CONDITIONS ARE FULLY SATISFIED. DRB APPROVED 5/31/2018 12:00:00 AM File No.: 210274 Revised 11-19-2013 Stewart Title Guaranty Company Privacy Notice Stewart Title Companies WHAT DO THE STEWART TITLE COMPANIES DO WITH YOUR PERSONAL INFORMATION? Federal and applicable state law and regulations give consumers the right to limit some but not all sharing. Federal and applicable state law regulations also require us to tell you how we collect, share, and protect your personal information. Please read this notice carefully to understand how we use your personal information. This privacy notice is distributed on behalf of the Stewart Title Guaranty Company and its title affiliates (the Stewart Title Companies), pursuant to Title V of the Gramm-Leach-Bliley Act (GLBA). The types of personal information we collect and share depend on the product or service that you have sought through us. This information can include social security numbers and driver's license number. All financial companies, such as the Stewart Title Companies, need to share customers' personal information to run their everyday business—to process transactions and maintain customer accounts. In the section below, we list the reasons that we can share customers' personal information; the reasons that we choose to share; and whether you can limit this sharing. Reasons we can share your personal information. Do we share Can you limit this sharing? For our everyday business purposes— to process your transactions and maintain your account. This may include running the business and managing customer accounts, such as processing transactions, mailing, and auditing services, and responding to court orders and legal investigations. Yes No For our marketing purposes— to offer our products and services to you. Yes No For joint marketing with other financial companies No We don't share For our affiliates' everyday business purposes— information about your transactions and experiences. Affiliates are companies related by common ownership or control. They can be financial and non-financial companies. Our affiliates may include companies with a Stewart name; financial companies, such as Stewart Title Company Yes No For our affiliates' everyday business purposes— information about your creditworthiness.No We don't share For our affiliates to market to you — For your convenience, Stewart has developed a means for you to opt out from its affiliates marketing even though such mechanism is not legally required. Yes Yes, send your first and last name, the email address used in your transaction, your Stewart file number and the Stewart office location that is handling your transaction by email to optout@stewart.com or fax to 1-800-335-9591. For non-affiliates to market to you. Non-affiliates are companies not related by common ownership or control. They can be financial and non-financial companies. No We don't share We may disclose your personal information to our affiliates or to non-affiliates as permitted by law. If you request a transaction with a non-affiliate, such as a third party insurance company, we will disclose your personal information to that non-affiliate. [We do not control their subsequent use of information, and suggest you refer to their privacy notices.] SHARING PRACTICES How often do the Stewart Title Companies notify me about their practices? We must notify you about our sharing practices when you request a transaction. How do the Stewart Title Companies protect my personal information? To protect your personal information from unauthorized access and use, we use security measures that comply with federal law. These measures include computer, file, and building safeguards. How do the Stewart Title Companies collect my personal information? We collect your personal information, for example, when you request insurance-related services provide such information to us We also collect your personal information from others, such as the real estate agent or lender involved in your transaction, credit reporting agencies, affiliates or other companies. What sharing can I limit? Although federal and state law give you the right to limit sharing (e.g., opt out) in certain instances, we do not share your personal information in those instances. Contact us: If you have any questions about this privacy notice, please contact us at: Stewart Title Guaranty Company, 1980 Post Oak Blvd., Privacy Officer, Houston, Texas 77056 DRB APPROVED 5/31/2018 12:00:00 AM DRB APPROVED 5/31/2018 12:00:00 AM DRB APPROVED 5/31/2018 12:00:00 AM Proposal - Detailed Fax: Phone: Sales Rep E-Mail: Pella Window and Door Showroom of Glenwood Springs Glenwood Springs, CO 81601 (970) 945-2289 (970) 945-4419 5317 Rd 154 204 Sales Rep Name: Sales Rep Phone: Sales Rep Fax: Customer Information Project/Delivery Address Order Information Primary Phone: Mobile Phone: Fax Number: E-Mail: Contact Name: County: Owner Name: Owner Phone: Order Number: Quote Number: Quote Name: Cust Delivery Date: Quoted Date: Order Type: Payment Terms: Customer PO #: Fricks Res./VRC N-2 Proline 042 (970) 390-2673 Heid Remodeling & Construction 421 Main Street C3 MINTURN, CO 81645 gerard@heidconst.com Deposit/C.O.D. Non-Installed Sales (970) 390-2673 Heid Remodeling & Construction 4770 Bighorn Road N-2 EAGLE 9942570 3/16/2018 VAIL, CO 81657 Booked Date: None Lot # Wall Depth: Contracted Date:Great Plains #: 8200363 Tax Code: ZZA Customer Number: Customer Account: 1002386005 1006920832 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 3 Master 42 - 3/4" X 35 - 3/4" ProLine, Sash Set Fixed, 42 X 35, Brown 10 1: Non-Standard Size Fixed Sash Set Frame Size: 42 X 35 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 154". PK # 2002 20of 1 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Master 42 - 3/4" X 59 - 3/4" ProLine, Sash Set Fixed, 42 X 59, Brown 15 1: Non-Standard Size Fixed Sash Set Frame Size: 42 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 202". PK # 2002 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 2 Master 42 - 3/4" X 59 - 3/4" Architect, Large Awning Vent, 42 X 59, Brown 20 1: Non-Standard Size Vent Awning Frame Size: 42 X 59 General Information: Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Sash / Panel: Ogee, Ogee, Standard Glass: Insulated Dual Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Fold-Away Crank, Brown, No Limited Opening Hardware, No Integrated Sensor, Sill Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.26, VLT 0.48, CPD PEL-N-30-13235-00001, Performance Class LC, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 08, Egress Not Applicable Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 202". PK # 2002 20of 2 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Master 29 - 3/4" X 47 - 3/4" ProLine, Casement Right, 29 X 47, Brown 25 1: 2947 Right Casement Frame Size: 29 X 47 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 152". PK # 2002 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Master 29 - 3/4" X 35 - 3/4" ProLine, Sash Set Fixed, 29 X 35, Brown 30 1: 2935 Fixed Sash Set Frame Size: 29 X 35 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 128". PK # 2002 20of 3 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Master Bath 35 - 3/4" X 35 - 3/4" ProLine, Casement Left, 35 X 35, Brown 35 1: 3535 Left Casement Frame Size: 35 X 35 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Tempered Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00479-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08, Egress Meets Typical for ground floor 5.0 sqft (E1) (United States Only) Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 140". PK # 2002 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 2 Entry 29 - 3/4" X 35 - 3/4" ProLine, Sash Set Fixed, 29 X 35, Brown 40 1: 2935 Fixed Sash Set Frame Size: 29 X 35 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 128". PK # 2002 20of 4 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Entry 29 - 3/4" X 59 - 3/4" ProLine, Casement Right, 29 X 59, Brown 45 1: 2959 Right Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Tempered Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00479-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 176". PK # 2002 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Entry 29 - 3/4" X 59 - 3/4" ProLine, Casement Left, 29 X 59, Brown 50 1: 2959 Left Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Tempered Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00479-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 176". PK # 2002 20of 5 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Entry 38 - 1/4" X 82 - 1/4" Pella Brand, Entry Door Inswing, 37.5 X 81.75, Brown, 6 11/16" 55 1: 3680 Entry Door Frame Size: 37 1/2 X 81 3/4 Unit Type: Left Inswing, Standard Sill, No Fire Rating, No Fire Rating Dimension Options: No Cut Down General Information: 8", 1 5/16", 6 11/16" Panel Style: 2 Panel Square Top Panel Selection: Mahogany, Painted, Brown, Unfinished Frame Selection: Clad, Pine, Oak Threshold, No Panel Reinforcement, Standard Enduraclad, Brown, Wood, Unfinished Hardware Options: Latch Bore with Deadbolt, 2 3/8", 2 1/8", No Integrated Sensor, No Handle Set, Standard Steel, Satin Nickel, Brown Finish Sill Unit Accessories: No Bang Panel Performance Information: U-Factor 0.14, SHGC 0.01, VLT 0.00, CPD PEL-M-174-02296-00001, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Wrapping Information: Nail Fin, Factory Applied, No Exterior Trim, 6 11/16", 8", Factory Applied, Pella Recommended Clearance, Perimeter Length = 239". PK # 2002 20of 6 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Living 58 - 3/4" X 59 - 3/4" ProLine, 2-Wide Casement, 58 X 59, Brown 60 1: 2959 Left Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 45, Calculated Positive DP Rating 45, Calculated Negative DP Rating 45, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 2: 2959 Right Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 45, Calculated Positive DP Rating 45, Calculated Negative DP Rating 45, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 234". PK # 2002 20of 7 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Living 58 - 3/4" X 47 - 3/4" ProLine, 2-Wide Sash Set, 58 X 47, Brown 70 1: 2947 Fixed Sash Set Frame Size: 29 X 47 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 2: 2947 Fixed Sash Set Frame Size: 29 X 47 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 210". PK # 2002 20of 8 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Living 58 - 3/4" X 47 - 3/4" ProLine, 2-Wide Sash Set, 58 X 47, Brown 75 1: 2947 Fixed Sash Set Frame Size: 29 X 47 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 2: 2947 Fixed Sash Set Frame Size: 29 X 47 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 210". PK # 2002 20of 9 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Living 58 - 3/4" X 59 - 3/4" ProLine, 2-Wide Casement, 58 X 59, Brown 80 1: 2959 Left Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 45, Calculated Positive DP Rating 45, Calculated Negative DP Rating 45, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 2: 2959 Right Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 45, Calculated Positive DP Rating 45, Calculated Negative DP Rating 45, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 234". PK # 2002 20of 10 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Kitchen 35 - 3/4" X 35 - 3/4" ProLine, Casement Left, 35 X 35, Brown 85 1: 3535 Left Casement Frame Size: 35 X 35 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08, Egress Meets Typical for ground floor 5.0 sqft (E1) (United States Only) Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 140". PK # 2002 20of 11 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Lower Bed 58 - 3/4" X 59 - 3/4" ProLine, 2-Wide Casement, 58 X 59, Brown 90 1: 2959 Left Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 45, Calculated Positive DP Rating 45, Calculated Negative DP Rating 45, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 2: 2959 Right Casement Frame Size: 29 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Wash Hinge Hardware, Fold-Away Crank, Brown, No Limited Opening Hardware Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.28, VLT 0.51, CPD PEL-N-14-00475-00001, Performance Class R, PG 45, Calculated Positive DP Rating 45, Calculated Negative DP Rating 45, Year Rated 08, Egress Meets Typical 5.7 sqft (E) (United States Only) Grille: No Grille, Vertical Mull 1: FactoryMull, Standard Joining Mullion, Mull Design Pressure- 20 Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 234". PK # 2002 20of 12 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 2 Lower Beds 34 - 1/4" X 82" ProLine, Inswing Door Left, 33.5 X 81.5, Brown 100 1: 3482 Left Inswing Door Frame Size: 33 1/2 X 81 1/2 General Information: Clad, 8", 6 11/16", Standard Sill, Brown Finish Sill Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Tempered Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Standard, Satin Nickel, Order Handle Set, Multipoint Lock, Aluminum Adjustable Screen: No Screen Performance Information: U-Factor 0.32, SHGC 0.26, VLT 0.49, CPD PEL-N-221-00187-00001, Performance Class LC, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08|11 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Factory Applied, Pella Recommended Clearance, Perimeter Length = 230". PK # 2002 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Lower Bed 42 - 3/4" X 59 - 3/4" Architect, Large Awning Vent, 42 X 59, Brown 105 1: Non-Standard Size Vent Awning Frame Size: 42 X 59 General Information: Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Sash / Panel: Ogee, Ogee, Standard Glass: Insulated Dual Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Fold-Away Crank, Brown, No Limited Opening Hardware, No Integrated Sensor, Sill Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.26, VLT 0.48, CPD PEL-N-30-13235-00001, Performance Class LC, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 08, Egress Not Applicable Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 202". PK # 2002 20of 13 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Lower Bed 42 - 3/4" X 59 - 3/4" ProLine, Sash Set Fixed, 42 X 59, Brown 110 1: Non-Standard Size Fixed Sash Set Frame Size: 42 X 59 General Information: Clad, 5", 3 11/16" Exterior Color / Finish: Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Glass: Insulated Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Performance Information: U-Factor 0.32, SHGC 0.31, VLT 0.58, CPD PEL-N-22-00527-00001, Performance Class R, PG 50, Calculated Positive DP Rating 50, Calculated Negative DP Rating 50, Year Rated 08 Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 202". PK # 2002 Location: Rough Opening: Attributes Viewed From Exterior Line # Qty 1 Lower Bed 42 - 3/4" X 59 - 3/4" Architect, Large Awning Vent, 42 X 59, Brown 115 1: Non-Standard Size Vent Awning Frame Size: 42 X 59 General Information: Standard, Clad, Pine, 5", 3 11/16" Exterior Color / Finish: Painted, Standard Enduraclad, Brown Interior Color / Finish: Unfinished Interior Sash / Panel: Ogee, Ogee, Standard Glass: Insulated Dual Tempered Low-E Advanced Low-E Insulating Glass Air Filled High Altitude Hardware Options: Fold-Away Crank, Brown, No Limited Opening Hardware, No Integrated Sensor, Sill Screen: Full Screen, Brown, InView™ Performance Information: U-Factor 0.32, SHGC 0.26, VLT 0.48, CPD PEL-N-30-13235-00001, Performance Class LC, PG 40, Calculated Positive DP Rating 40, Calculated Negative DP Rating 40, Year Rated 08, Egress Not Applicable Grille: No Grille, Wrapping Information: Foldout Fins, Factory Applied, No Exterior Trim, 6 11/16", 8", Standard Four Sided Jamb Extension, Factory Applied, Pella Recommended Clearance, Perimeter Length = 202". PK # 2002 20of 14 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Location: Attributes Line # Qty 2 0BLTMB03 - DS/AS/PL Patio Door Keyed-Alike Cylinder, Black Faced (1) 120 Location: Attributes Line # Qty 1 S & H Tailgate Zone 2 - Std Shipping & Handling non-taxable Z2 125 Thank You For Your Interest In Pella® Products 20of 15 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 PELLA WARRANTY: Pella products are covered by Pella's limited warranties in effect at the time of sale. All applicable product warranties are incorporated into and become a part of this contract. Please see the warranties for complete details, taking special note of the two important notice sections regarding installation of Pella products and proper management of moisture within the wall system. Neither Pella Corporation nor the Seller will be bound by any other warranty unless specifically set out in this contract. However, Pella Corporation will not be liable for branch warranties which create obligations in addition to or obligations which are inconsistent with Pella written warranties. Clear opening (egress) information does not take into consideration the addition of a Rolscreen [or any other accessory] to the product. You should consult your local building code to ensure your Pella products meet local egress requirements. Per the manufacturer’s limited warranty, unfinished mahogany exterior windows and doors must be finished upon receipt prior to installing and refinished annually, thereafter. Variations in wood grain, color, texture or natural characteristics are not covered under the limited warranty. INSYNCTIVE PRODUCTS: In addition, Pella Insynctive Products are covered by the Pella Insynctive Products Software License Agreement and Pella Insynctive Products Privacy Policy in effect at the time of sale, which can be found at Insynctive.pella.com. By installing or using Your Insynctive Products you are acknowledging the Insynctive Software Agreement and Privacy Policy are part of the terms of sale. ________________________________________________________________________________________________________________________________________________ ARBITRATION AND CLASS ACTION WAIVER ("ARBITRATION AGREEMENT") YOU and Pella and its subsidiaries and the Pella Branded Distributor AGREE TO ARBITRATE DISPUTES ARISING OUT OF OR RELATING TO YOUR PELLA PRODUCTS (INCLUDES PELLA GOODS AND PELLA SERVICES) AND WAIVE THE RIGHT TO HAVE A COURT OR JURY DECIDE DISPUTES. YOU WAIVE ALL RIGHTS TO PROCEED AS A MEMBER OR REPRESENTATIVE OF A CLASS ACTION, INCLUDING CLASS ARBITRATION, REGARDING DISPUTES ARISING OUT OF OR RELATING TO YOUR PELLA PRODUCTS. You may opt out of this Arbitration Agreement by providing notice to Pella no later than ninety (90) calendar days from the date You purchased or otherwise took ownership of Your Pella Goods. To opt out, You must send notice by e-mail to pellawebsupport@pella.c om, with the subject line: “Arbitration Opt Out” or by calling (877) 473-5527. Opting out of the Arbitration Agreement will not affect the coverage provided by any applicable limited warranty pertaining to Your Pella Products. For complete information, including the full terms and conditions of this Arbitration Agreement, which are incorporated herein by reference, please visit www.pella.com/arbitration or e-mail to pellawebsupport@pella.com, with the subject line: “Arbitration Details” or call (877) 473-5527. D'ARBITRAGE ET RENONCIATION AU RECOURS COLLECTIF ("convention d'arbitrage") EN FRANÇAIS SEE PELLA.COM/ARBITRATION. DE ARBITRAJE Y RENUNCIA COLECTIVA ("acuerdo de arbitraje") EN ESPAÑOL VER PELLA.COM/ARBITRATION. ________________________________________________________________________________________________________________________________________________ Product Performance Information: U-Factor, Solar Heat Gain Coefficient (SHGC), and Visible Light Transmittance (VLT) are certified by the National Fenestration Rating Council (NFRC). Manufacturer stipulates that these ratings conform to applicable NFRC procedures for determining whole product performance. NFRC ratings are determined for a fixed set of environmental conditions and a specific product size. NFRC does not recommend any products and does not warrant the suitability of any product for any specific use. Design Pressure (DP), Performance Class, and Performance Grade (PG) are certified by a third party organization, in many cases the Window and Door Manufacturers Association (WDMA). The certification requires the performance of at least one product of the product line to be tested in accordance with the applicable performance standards and verified by an independent party. The certification indicates that the product(s) of the product line passed the applicable tests. The certification does not apply to mulled and/or product combinations unless noted. Actual product results will vary and change over the products life. For more performance information along with information on Florida Product Approval System (FPAS) Number and Texas Dept. of Insurance (TDI) number go to www.pella.com /performance. BRANCH WARRANTY: 20of 16 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 The full text of the manufacturer’s current warranty can be found at <http://www.pella.com/products/warranty.asp>. Supplier (PWD) offers the following Limited Warranty: LIMITED WARRANTY THE PELLA LIMITED WARRANTY EXCLUDES NON-PELLA PRODUCTS FROM WARRANTY COVERAGE STATED IN THIS DOCUMENT. SEE YOUR SALES REPRESENTATIVE FOR SPECIFIC PRODUCT WARRANTY INFORMATION. ALL NON-PELLA PRODUCTS CARRY A 1 YEAR LIMITED WARRANTY. NOTE* - NO WARRANTY IS PROVIDED FOR CONSEQUENTIAL DAMAGES. PWD MAKES NO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER NATURE OR GUARANTEE, EXPRESS OR IMPLIED. UPON REQUEST, PWD WILL PROVIDE THE MANUFACTURER’S WARRANTIES CURRENTLY IN EFFECT RELATED TO THE MATERIAL SUPPLIED. THE MANUFACTURER’S WARRANTIES SHALL HAVE NO EFFECT UNTIL PWD HAS BEEN PAID IN FULL ALL SUMS DUE AND OWING FOR THE PRODUCT OR MATERIALS SUPPLIED PURSUANT TO THIS CONTRACT. In no event shall PWD or Pella Corporation be liable for consequential, indirect or incidental damages or for any amount in excess of the purchase price whether the claim is for breach of warranty or negligence. NATURAL PROPERTIES OF WOOD MATERIALS Wood is a natural product and that variations in grain and shading will occur and because no two pieces of wood are exactly alike, variations after finishing are to be expected and are not considered defects. Custom Materials Customer recognizes and acknowledges that the product or materials supplied by PWD are custom in nature and there is no ready market or value other than for the job for which the materials are manufactured and/or supplied. If Customer at any time fails to pay PWD for the materials supplied, PWD may, at it's option, suspend all deliveries or terminate the Contract with the Customer. Such suspension or termination DOES NOT excuse payment for those materials and products already manufactured at the full contract price or payment for any component parts already purchased and obtained by PWD. Title Title, ownership and the right to possession of the product or materials furnished or to be furnished by PWD shall remain in PWD until PWD is paid in full. PWD shall have a right to possession of the product or materials but is not obligated to repossess the materials in the event of non-payment. PWD's right to repossess materials is in addition to, and not a limitation upon or a waiver of PWD's other legal rights including the right to place mechanic's liens against the real property for which materials were supplied. All risk of loss or damage shall pass to the Customer upon delivery of the materials. In the event PWD elects to repossess any materials for which payment in full has not been made, Customer shall be responsible for any damage to or loss of materials and their component parts. Risk of Loss Although title and ownership and the right to possession of the materials or product furnished or delivered to the Customer shall remain with PWD until the materials are fully paid for, the risk of loss for the product or materials once they are delivered to the Customer shall be the Customer's responsibility. Therefore, the customer must maintain sufficient insurance to cover any damage, vandalism or any other loss to the product or materials. Any insurance proceeds would be paid over to PWD for the full amount owed to PWD in the event of any loss. Dispute Resolution. Direct Discussion. If a dispute arises out of or relates to this Agreement, the parties shall endeavor to settle the dispute through direct discussion. Mediation. Disputes not resolved by direct discussion shall be submitted to mediation pursuant to the Construction Industry Mediation Rules of the American Arbitration Association. The parties shall select the mediator within fifteen (15) days of the request for mediation. Engaging in mediation is a condition precedent to any form of binding dispute resolution. This provision shall not act to delay Supplier filing a mechanic’s lien foreclosure action. The cost of any mediation proceeding shall be shared equally by the parties participating. TERMS & CONDITIONS: PLEASE READ CAREFULLY AND SIGN OR INITIAL WHERE REQUIRED.YOU ARE RESPONSIBLE FOR UNDERSTANDING THE ENCLOSED INFORMATION AS IT RELATES TO YOUR ORDER AND OUR COMPUTER PRINTOUT OF YOUR ORDER. Ø Tax exempt # _________________ 20of 17 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 Ø Order #________________________________ PO#________________________________ Ø Total amount of order with taxes $________________________ your tax rate is __________%. Ø A deposit of $_____________________ is required prior to factory order. q TERMS OF PAYMENT Interest of one and one half percent (1-1/2%) per month will be charged on all past due accounts. If Customer or Customer's agent directs PWD to retain the products or materials, although available for delivery, customer is responsible for payment in full within 20 days after the delivery date shown below. Customer agrees to pay all costs of collection including reasonable attorney's fees. This contract is deemed to have been entered into in the State of Colorado and Colorado law shall govern its interpretation and enforcement. Jurisdiction and venue for any legal action shall be in the County or District Court, City and County of Denver, Colorado. q Delivery Your requested DELIVERY DATE is (MUST BE DELIVERED WITHIN 5 DAYS OF THIS DATE) ____________________. In the event of failure to receive product within 10 days of your original delivery date a storage fee of $50 per week will be accessed. Please intial ______. When product has been in Pella's warehouse for more than 10 days, order must be paid in full. q DELIVERY DATES ARE NOT GUARANTEED and PWD shall not be liable for any direct, indirect or consequential damages or loss caused by delay in shipment. You will be notified as soon as possible if delivery during the above week becomes unattainable and a new delivery week will be established. Unless other arrangements are made with PWD, deliveries are tailgate and YOU MUST FURNISH LABOR TO UNLOAD. PWD assumes no responsibility or liability for injuries or damage to product after product leaves our truck. · An authorized signature is required to accept delivery. · Signed delivery tickets will be conclusive of delivery of the materials described, the quantities listed, and receipt in good and undamaged condition. · No claims for concealed damage, errors or defects in product, materials, workmanship, or shortages will be allowed unless written notice is received by PWD within three (3) working days after delivery. If concealed damage, errors or defects in product, materials, workmanship, or shortages are discovered and timely notice is received by PWD, PWD will be liable only for the reasonable costs of supplying replacement or repairs. ADDITIONS/REVISIONS/CANCELLATIONS/RETURNS All Pella Products, including windows, doors, parts and accessories are made to order and therefore non-refunable. Please review all the attributes of your order for accuracy prior to signing the purchase agreement. q Any revisions after the contract date must be accompanied by a signed PWD Change Order Form, or by a separate contract. q The terms of this Sales Contract shall apply to any additions, changes, and partial shipments requested for this job by the Customer or the Customer's agent. ORDER CHECKLIST - CUSTOMER MUST INITIAL EACH _______ I understand that I have three working days after the date of delivery to report concealed damage, errors or shortages. _______ I or my authorized representatives have verified the product attributes, handing, color, measurements and dimensions for the product ordered. _______ Deliveries require heavy lifting. I understand I must off load product from the truck tailgate into my home or garage. _______ I understand that a signed and dated copy of this Sales Contract must be in the possession of Pella Windows & Doors, Inc., along with my deposit check and credit application (if either is required), before my order can be submitted to the factory for production. _______ I understand that all orders are subject to acceptance by an officer of PWD. _______ I understand that the hinging and sliding designations for ALL products are as viewed from the OUTSIDE of the structure and from left to right. _______ I understand that wood is a natural product and that variations in grain and shading will occur and because no two pieces of wood are exactly alike, variations after finishing are normal and not considered defective. _______ I understand that building and safety code compliance is my responsibility as the purchaser. _______ Product warranty and other important information are contained in this document. 20of 18 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 THIS DOCUMENT, INCLUDING ADDENDUMS IF APPLICABLE, AND THE TERMS AND CONDITIONS CONTAINS THE ENTIRE AGREEMENT AND BUYER REPRESENTS THAT HE HAS READ, UNDERSTANDS AND AGREES TO BE BOUND BY THE SAME. SERVICE: Please sign the very last page and return to Pella as your acceptance of this quote. Parts take up to two weeks to arrive and must be paid in full at time of order however; labor can be paid up on completion of the job. Quotes are valid for 60 days and subject to rebid after such time. Please contact Customer Service with any questions you may have at 800-423-7511. 20of 19 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM Customer: Quote Number: Project Name: Heid Remodeling & Construction Fricks Res./VRC N-2 9942570 20of 20 Page Printed on Detailed Proposal For more information regarding the finishing, maintenance, service and warranty of all Pella® products, visit the Pella® website at www.pella.com 3/26/2018 DRB APPROVED 5/31/2018 12:00:00 AM DRB APPROVED 5/31/2018 12:00:00 AM