HomeMy WebLinkAboutDRB18-0444 Approved Plans Landmark Vent.pdfCONSULTING ENGINEERS
VAIL I DENVER
{970) 376-7396
PO Box 2411
Avon, CO 81620
JOB 5020.02 SCALE None
SHEET NO. _____ _ OF ____ _
CALCULATED BY.......::D:;.;..M::.:.:B:;..__ ___ DATE 9/4/18
CHECKED BY _____ _ DATE ___ _
SUBJECT Landmark Laundry Repairs
LANDMARK EAST ELEVATION
SHEET
J A-1
TOWN OF®
JOINT PROPERTY OWNER
WRITTEN APPROVAL LETTER
The applicant must submit written joint property owner approval for applications affecting shared ownership properties
such as duplex, condominium, and multi-tenant buildings. This form, or similar written correspondence, must be com-
pleted by the adjoining duplex unit owner or the authorized agent of the home owner's association in the case of a con-
dominium or multi-tenant building. All completed forms must be submitted with the applicants completed application.
I, (print name) __ ...:......;:~-=..-__;__;...;_:.....;.__,.-+---=....;_r+::=-:..---· a joint owner, or authority of the association,
of property located at -....::::~~~-=.;~H~::.pd..::::..!...;..!.;:!...!..!~:..:...t:::.._ ________ , provide this Jetter as written
-----4-""""-1a:....:...>"'------------which have been submitted to the
Town of Vail Community Development Department for the proposed improvements to be completed at the address not-
ed above. I understand that the proposed improvements include:
I understand that modifications may be made to the plans over the course of the review process to ensure compliance
with the Town's applicable codes and regulations; and that it is the sole responsibility of the applicant to keep the joint
property owner apprised of any changes and ensure that the changes are acceptable and appropriate. Submittal of an
application results in the applicant agreeing to this statement.
:i5(Q
{Initials)
Print Name
1/We authorize any and all changes submitted to the Town in reference to the above mentioned project.
1/We waive all rights to notification and review of submitted changes.
-~,...,....,-.,.--1/We do not authorize any changes submitted to the Town in reference to the above mentioned project.
{Initials) 1/We wish to receive notifications and reviews of submitted changes.
RUSKIN®
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955
ELF6375DX and ELF6375DXH DRAINABLE STATIONARY LOUVERS
EXTRUDED ALUMINUM LOUVER
STANDARD CONSTRUCTION
FRAME
6" (152) deep, 6063T5 extruded aluminum.
ELF6375DX 1 -.081" (2.1) nominal wall
thickness. ELF6375DXH -.125" (3.2) nomi-
nal wall thickness. Downspouts and caulk-
ing surfaces provided.
BLADES
6063T5 extruded aluminum.
ELF6375DX-.081 " (2.1) nominal wall
thickness. ELF6375DXH -.125" (3.2) nom-
inal wall thickness. Drainable blades are
positioned at at 37 112• angle and spaced
approximately 5 29/32" (150) center to center.
SCREEN
3/4" x .051 " (19 x 1.3) expanded, flattened
aluminum bird screen in removable frame.
Screen adds approximately 1/2'' (13) to lou-
ver depth.
FINISH
Mill.
MINIMUM SIZE
12"w X 12"h (305 X 305).
APPROXIMATE SHIPPING WEIGHT
ELF6375DX -4 lbs./ft.' (19.5 kg /m')
ELF6375DXH -6 lbs./ft' (29.3kg /m')
MAXIMUM FACTORY ASSEMBLY SIZE
Shall be 75 sq. ft. (?m') per section, not to
exceed 120"w x 90"h (3048 x 2286) or 90"w
X 120"h (2286 X 3048).
Louvers larger than the maximum factory
assembly size will require field assembly of
smaller sections.
SUPPORTS
Louvers may be provided with rear mounted
blade supports that increase overall louver
depth depending on louver size, assembly
configuration or wind load.
Consult Ruskin for additional information. L__ Varies r--
Dimensions in inches, parenthesis ( ) indicate millimeters.
SIZE
TAG QTY. FRAME
A*-WIDE 8*-HIGH
PROJECT
ARCH./ENGR.
REPRESENTATIVE
L s .. _J (1 52)
Bird
Screen
FEATURES
The ELF6375DX and ELF6375DXH offers:
57% Free Area.
Published performance rati ngs based on
testing in accordance with AMCA Publica-
tion 511 .
High performance frame system with drain-
able head collects and removes water to
provide excellent water penetration perfor-
mance.
Drain gutter in each blade minimizes water
cascade between blades.
• Architecturally styled, hidden mullions allow-
ing continuous line appearance up to 120"
(3048).
• Aluminum construction for low maintenance
and high resistance to corrosion.
• All welded construction.
VARIATIONS
Variations to the basic design of these louvers
are available at additional cost. They include:
Extended sill.
Hinged frame.
Front or rear security bars.
Filter racks.
• A variety of bird and insect screens.
• Selection of finishes : prime coat, baked
enamel (modified fluoropolymer), epoxy,
Acrodize, Kynar, clear and color anodize .
(Some variation in anodize color consistency
is possible.)
Consult Ruskin for other special requirements.
FRAME CONSTRUCTION
L__ 'U 11/2'pl-t1~25)
A* X s•
I
STANDARD INTEGRAL FLANGE
*Units furnished 1/4" (6) smaller than given opening dimensions.
VARIATIONS
LOCATION
CONTRACTOR
DATE
Spec ELF6375DXIELF6375DXH·597/Replaces ELF6375DX-296 ALL STATED SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION. <e Ruskin Manufacturing 1997
SUGGESTED SPECIFICATION
Furnish and install louvers as hereinafter specified where shown on
plans or as described in schedules. Louvers shall be stationary
drainable type with drain gutters in each blade and downspouts in
jambs and mullions. Louvers shall have a minimum of 57% free
area based on a 48" wide x 48" high (1219 x 1219) size. Stationary
drainable blades shall be contained within a 6" (152) frame. Louver
components (heads, jambs. sills, blades. & mullions) shall be fac-
tory assembled by the louver manufacturer. Louver sizes too large
for shipping shall be built up by the contractor from factory assem-
bled louver sections to provide overall sizes required. Louver
design shall limit span between visible mullions to 10 feet (3) and
shall incorporate structural supports required to withstand a wind-
load of 20 lbs. per sq. ft. (.96kPa) (equivalent of a 90 mph wind
[145 KPH] wind-specifier may substitute any loading required }.
PERFORMANCE DATA
AMCA Standard 500 provides a reasonable bas is for testing and
rating louvers. Testing to AMCA 500 is performed under a certain
set of laboratory conditions. This does not guarantee that other
conditions will not occur in the actual environment where louvers
must operate.
Louvers shall be Ruskin Model ELF6375DX or ELF6375DXH
extruded 6063T5 aluminum construction as follows:
Frame: 6" (1 52) deep. ELF6375DX -.081" (2.1 ) nominal wall
thickness. ELF6375DXH -.125" (3 .2) nominal wall
thickness.
Blades: ELF6375DX -.081 " (2.1) nominal wall thickness .
ELF6375DXH -.125" (3.2) nominal wall thickness.
Drainable blades are positioned at 371/2° angle and
spaced approximately 529/32" (150) center to center.
Screen: 3/4" x .051" (19 x 1.3) expanded , flattened aluminum in
removable frame.
Finish: Select finish specification from Ruski n Finishes
Brochure.
Published louver performance data bearing the AMCA Certified
Ratings Seal for Air Performance & Water Penetration must be sub-
mitted for approval prior to fabrication and must demonstrate pres-
sure drop and water penetration equal to or less than the Ruskin
model specified.
The louver system should be designed with a reasonable safety
factor for louver performance. To ensure protection from water
carryover. design with a performance level somewhat below maxi-
mum desired pressure drop and .01 oz./sq. ft. of water penetration.
WATER PENETRATION
ltl 4) ..... < 4)
4) ..... u. .... 0 -E'tl --o .... ·-Q) ..... ~ 4) CUe. s: .... en en
Q) 4) (.) .... c .
::J ·= .3-E
'010 c...-ltl
N
0:::: I: 4) .... ltl 3:
,..;
0
Test size 48" wide x 48" high (1219 x 1219)
Beg inning point of water penetration at .01 oz./sq. ft. is 1023 fpm (312m/min).
0.3
(3.23)
0.25 (2.69)
0.2
(2.15)
0.15 (1.61 )
0.1
(1.08)
0.05
(.54)
0
900
(274)
I
I
I
~ /
1000
(305)
1100
(335)
I v
/
1200
(366)
Free Area Velocity in feet and (meters) per minute
Standard air .075 lb/ft'
1300
(396)
1400
(427)
1.00 (25.40! .90 (22.86
. 80 (20.32)
.70 (17.78)
.60 (15.24)
E .50 (12.70) .s .40 (10.16)
"0 c: .30 (7.62) ra
Cl ~ .20 (5.08)
Ill Q) .J: u ..:
c: .10 (2.54)
.09 (2.29) a. .08 (2.03) 0 ... .07 (1.78)
0 .06 (1.52) Q) ... .05 (1.27) :I Ill .04 (1.02) Ill Q) ... .03 (.76) a..
-~ -; .02 (.51) u;
.01 (.25)
FREE AREA GUIDE
Free Area Guide shows free area in ft' and m' for various sizes of ELF6375DX and ELF6375DXH.
Width -Inches and Meters
12 18 24 30 36 42 48 54 60 66 72 78
0.30 0.46 0.61 0.76 0.91 1.07 1.22 1.37 1.52 1.68 1.83 1.98
12 0.31 0.49 0.67 0.86 1.04 1.22 1.41 1.59 1.77 1.96 2.14 2.32
0.30 0.03 0.05 0.06 0.08 0.10 0.11 0.13 0.15 0.16 0.18 0.20 0.22
18 0.58 0.93 1.28 1.63 1.98 2.32 2.68 3.03 3.37 3.73 4.08 4.42
0.46 0.05 0.09 0.12 0.15 0.18 0.22 0.25 0.28 0.31 0.35 0.38 0.41
24 0.86 1.38 1.89 2.40 2.92 3.43 3.96 4.47 4.98 5.50 6.02 6.53
0.61 0.08 0.13 0.18 0.22 0.27 0.32 0.37 0.42 0.46 0.51 0.56 0.61
30 1.14 1.82 2.50 3.18 3.87 4.54 5.24 5.92 6.59 7.28 7.97 8.64
0.76 0.11 0.17 0.23 0.30 0.36 0.42 0.49 0.55 0.61 0.68 0.74 0.80
36 1.41 2.26 3.11 3.95 4.80 5.64 6.52 7.35 8.18 9.04 9.89 10.73
0.91 0.13 0.21 0.29 0.37 0.45 0.52 0.61 0.68 0.76 0.84 0.92 1.00
42 1.69 2.70 3.72 4.72 5.75 6.74 7.79 8.79 9.79 10.81 11.83 12.83
1.07 0.16 0.25 0.35 0.44 0.53 0.63 0.72 0.82 0.91 1.00 1.10 1.19
48 1.97 3.15 4.33 5.50 6.69 7.86 9.08 10.24 11.40 12.59 13.78 14.95
1.22 0.18 0.29 0.40 0.51 0.62 0.73 0.84 0.95 1.06 1.17 1.28 1.39
54 2.24 3.59 4.94 6.27 7.63 8.96 10.35 11 .67 13.00 14.35 15.71 17.04
1.37 0.21 0.33 0.46 0.58 0.71 0.83 0.96 1.08 1.21 1.33 1.46 1.58
60 2.52 4.03 5.55 7.05 8.57 10.06 11.62 13.12 14.60 16.13 17.65 19.14
1.52 0.23 0.37 0.52 0.66 0.80 0.93 1.08 1.22 1.36 1.50 1.64 1.78
66 2.80 4.47 6.16 7.82 9.51 11.17 12.90 14.56 16.20 17.90 19.59 21 .24
1.68 0.26 0.42 0.57 0.73 0.88 1.04 1.20 1.35 1.51 1.66 1.82 1.97
72 3.08 4.92 6.76 8.59 10.45 12.27 14.18 16.00 17.81 19.67 21.53 23.35
1.83 0.29 0.46 0.63 0.80 0.97 1.14 1.32 1.49 1.66 1.83 2.00 2.17
78 3.35 5.36 7.37 9.37 11.40 13.38 15.45 17.44 19.41 21 .44 23.47 25.45
1.98 0.31 0.50 0.68 0.87 1.06 1.24 1.44 10.91 1.80 1.99 2.18 2.37
84 3.63 5.80 7.98 10.14 12.34 14.48 16.73 18.88 21 .02 23.21 25.41 27.55
2.13 0.34 0.54 0.74 0.94 1.15 1.35 1.00 1.75 1.95 2.16 2.36 2.56
90 3.91 6.25 8.59 10.92 13.28 15.59 18.01 20.32 22.62 24.98 27 .35 29.65
2.29 0.36 0.58 0.80 1.01 1.23 1.45 1.67 1.89 2.10 2.32 2.54 2.76
PRESSURE DROP
I I
I
/I/
/;
lj
INTAKE MODE /; EXHAUST MODE
1//
Vi/
II!
I
i
1/. ;V XI
j/
I
I I
I I
~ §_ e N N M M :;;-:;-in ~ "' ~ ~ ?J~~~<i) N "' ~N~~~ e ~ &~~ 8. -----
0 0 g 0 0 0 0 0 0 0 0 0 0 0 ggggg 0 0 ~ 0 0 0 0 0 0 0 0 0 0 N "' ID,..._OO a\0 0 0 0 0 00000 N .., "' "' u::a,....oocn~-
Air Velocity in feet and (meters) per minute through Free Area
84
2.13
2.51
0.23
4.77
0.44
7.05
0.66
9.33
0.87
11.58
1.08
13.86
1.29
16.14
1.50
18.40
1.71
20.67
1.92
22.94
2.13
25.21
2.34
27.48
2.55
29.75
2.76
32.02
2.98
90 96 102 108 114 120
2.29 2.44 2.59 2.74 2.90 3.05
2.69 2.88 3.06 3.25 3.43 3.61
0.25 0.27 0.28 0.30 0.32 0.34
5.13 5.48 5.82 6.18 6.52 6.87
0.48 0.51 0.54 0.57 0.61 0.64
7.57 8.09 8.60 9.12 9.63 10.15
0.70 0.75 0.80 0.85 0.89 0.94
10.01 10.70 11 .37 12.06 12.74 13.42
0.93 0.99 1.06 1.12 1.18 1.25
12.44 13.29 14.13 14.98 15.82 16.67
1.16 1.24 1.31 1.39 1.47 1.55
14.88 15.89 16.90 17.92 18.92 19.94
1.38 1.48 1.57 1.67 1.76 1.85
17.33 18.51 19.68 20.87 22.04 23.23
1.61 1.72 1.83 1.94 2.05 2.16
19.75 21 .10 22.44 23.79 25.12 26.48
1.84 1.96 2.09 2.21 2.33 2.46
22.19 23.71 25.21 26.73 28.22 29.75
2.06 2.20 2.34 2.48 2.62 2.76
24.63 26.31 27.98 29.67 31 .32 33.01
2.29 2.44 2.60 2.76 2.91 3.07
27.07 28.91 30.74 32.60 34.42 36.28
2.52 2.69 2.86 3.03 3.20 3.37
29.51 31 .52 33.51 35.54 37.52 39.55
2.74 2.93 3.11 3.30 3.49 3.68
31.94 34.12 36.28 38.48 40.62 42.82
2.97 3.17 3.37 3.58 3.77 3.98
34.38 36.73 39.05 41 .41 43.72 46.09
3.19 3.41 3.63 3.85 4.06 4.28
Ratings do not include the effect of
a bird scree n .
Ruskin Manufacturing Company certifies
that the ELF6375DX and ELF6375DXH
Louvers shown herein is licensed to bear
the AM CA Seal. The ratings shown are
based on tests and procedures per-
formed in accordance with AMCA
Publication 511 and comply with the
requirements of the AMCA Certified
Ra tings Program. The AMCA Certified
Ratings Seal applies to air performance
ratings and water penetration ratings
only.
TYPICAL INSTALLATION DETAILS
CMU
Louver
Extended
Sill
Louver --~~
Masonry
Wall
Wood
Installation
RUSKIN ® 3900 Dr. Greaves Rd.
Kansas City, MO 64030
(816) 761-7476
FAX (816) 765-8955
Metal
Panel
Drip
Cap
Louver ---11-J
Extended
Sill
Integral
Flange
Frame
Louver ---!
Fastener
(by others)
Metal Panel
Wall
Flange
Mount
Accessories at additional cost.
R finishes provide extended weathering resistance similar to adjacent building surfaces . RUSKIN Ru.s~zw ® RUSKIN finishes enhance product appearance to blend with other colors selected . These same
provides most finishes available to architects and engineers. The standard finishes described
herein represent those finishes usually selected , specified, or required for most applications.
FINISHES AND COLOR
FLUROPON® AND BAKE
The 15 colors below are available in F opon (70 % PVDF) or Baked Enamel (50% PV.IIIIIEIJIII!I!!9'!~
• BONE WHITE (24) • DARK BRONZE (75)
• LIGHT STONE (43) • SHELBURNE (69) • FOREST GREEN (36)
• SANDSTONE (67) • HERRINGBONE (37) • CORONADO RED (34)
• SAHARA TAN (65) • STONE GRAY (78) • ASCOT WHITE (19)
• BLACK (89) • MEDIUM BRONZE (72) • TAUPE (52)
--PEARLEDIZE 70AND PEARLEDIZE 50 STANDARD COLORS-----
The 9 colors below are available in Pearledize 70, Pearledize 50, Clear or Color Anodize finishes only, and may be more expensive than
the Fluropon and Baked Enamel colors shown above. Italicized color names and codes are available in Anodized Finish.
• DARK BRONZE (75)
·DARK BRONZE (75)
• BRIGHT SILVER (88)
• Clear 204R1 & 215R1 (00)
·COPPER (92)
• MEDIUM BRONZE (72)
·MEDIUM BRONZE (72)
• WARM SILVER (96)
• CORAL REEF (93)
• CHAMPAGNE BRZ (71)
• CHAMPAGNE BRZ (71)
• ASTI (86)
• BLUE (05)
The colors shown herein are only a sample of thousands of colors available.
Please contact RUSKIN for information reaardina custom color matchinG.
Disclaimer: This color card is for reference only and is not meant to be used for color matching or
final color approval. Shades may vary due to the color and resolution of the computer screen or
print-out. Ruskin is not responsible for color matches made with this online color chart.
3900 Dr. Greaves Rd.
Kansas City, Missouri 64030
Ru.,~.,IAI® Phone (816) 761-7476 ~ftiiV FAX (816) 765-8955
e-mail: ruskin@ruskin .com RUSKIN. com
RUSKIN®
FINISHES AND COLOR GUIDE
Factory finishes by RUSKIN are designed for low VOC emissions and el iminate the risk of VOC
emissions found in louver finishes that are appl ied on site. All RUSKIN manufacturing facilities
operate in full compliance with all applicable air perm itting regulations. All facilities maintain ISO
14001 Environmental Management Systems wh ich include VOC emiss ion reduction strategies
in cluding state of the art spray equipment and op-erator training .
TYPE OF FINISH FINISH SPECIFICATIONS
FLUROPON® OR 70% PVDF
RUSKIN Superior Finish: 70% PVDF paint finishes provide
maximum resistance against color fade and chalking. This
carbon/fluorine bond, unique to the resin , when coupled with the
finest inorganic pigments , produc~s the most durable and long lasting
finish in the industry. These finishes are resistant to most chemicals,
acid rain , salt spray and general air pollution. RUSKIN offers a twenty-
year warranty on these fi nishes in standard colors on standard
extruded aluminum products. All standard colors meet or exceed
AAMA 2605-11 .*
BAKED ENAMEL-50% ACROFLUR/PVDF
RUSKIN'S High Performance Finish: Acroflur or 50% PVDF
finishes provide fluoropolymer benefits such as long color life and
resistance to chalking and chemicals . For optimization of the price -
benefit ratio, they are appropriate coatings for today's non-
monumental projects. Twenty-year warranty for standard color on
standard extruded aluminum products is also available for RUSKIN'S
Baked Enamel.
PRIME COAT
Preparation for field painting. Fin ish may be topcoated with
epoxy, vinyl , urethane and other heavy-duty coatings within six months
of applications. Prime coat contaminations always occurs before field
painting and requires thorough field cleaning prior to painting.
PEARLEDIZE 70 AND PEARLEDIZE 50
RUSKIN'S High Pearlescent Finish. Pearledize is a PVDF-based
finish that utilizes pearlescent mica pigments to simulate the metallic
appearance of anodized and metallic paint finishes. Available as
Pearledize 70 (70% PVDF) and Pearledize 50 (50% PVDF).
Pearledize 70 meets the AAMA 2605-11• spe cification while
Pearledize 50 meets the AAMA 2604-05t specification. A twenty-year
warranty is available on standard colors on standard extruded
aluminum products.
COLOR ANODIZE
Electrolytically deposited coating on aluminum: The color
anodize process specified in Aluminum Association Code AA-C22A44
electrolytically deposits inorganic color pigment finish to a 0.7 mil
(18iJm) minimum surface depth on sulfuric acid anodized aluminum.
Treated aluminum is sealed to convert a freshly formed al uminum
oxide finish to a corrosion resistant, inert condition . Available only on
aluminum. Some shade variation may occur.
CLEAR ANODIZE
Clear oxide coating for aluminum: Clear anodize preoxidizes the
aluminum surface for uniform clear finish not easily affected by
natural oxidizing influences. Improved metallic luster appearance is
similar to mill finish. 204-R1 (Aluminum Association Code AA-
C22A31) provides 0.4 mi (10iJm) minimum surface depth treatment
recommended for normal weather exposure. 215-R1 (Aluminum
Association Code AA-C22A41) provides 0.7 mils (181Jm) minimum surface depth recommended (or severely corrosive and abrasive
atmosphenc exposure. Both finish types available only on aluminum.
Dimensions in parentheses {)indicate microns. Fluropon is registered trademark of Valspar.
Before paint application, louvers shall be thoroughly cleaned and
pretreated to assure maximum performance. Fluropon or PVDF finish
shall be applied to provide 1.2 mils (30iJm) factory applied, baked-on
film in accordance with AAMA 2605-11• 'Voluntary Specification
Performance Requirements and Test Procedures for Superior Performing
Organic Coatings on Architectural Extrusions and Panels". Color shall
be RUSKIN (specify color name and number).
Louvers shall receive factory applied, baked-on Acroflur or 50% PVDF
based color coating following thorough clea ning and pretreatment of
metal. The finish shall be applied at 1.2 mils (301Jm) total dry film
thickness in accordance with AAMA 2604-05t Section 4.2 and 4.3.
Color shall be RUSKIN (specify color name and number).
Louvers shall receive prime coating following thorough cleaning and
pretreatment of metal. Field topcoat with epoxy, vinyl, urethane or
other heavy-duty coating within six months of application. Prime coat
shall be a minimum of .3 ± .1 mils (8 ± 3iJm) thick.
Louvers shall receive thorough cleaning and pretreatment as described
above. Pearledize coating shall be applied and baked to achieve a
hard durable finish in compliance with either AAMA 2605-11• or
AAMA 2604-05t as selected and specified. Color shall be RUSKIN
(specify color name and number).
Louvers shall receive electrolytically deposited color anodized finish
complying with Aluminum Association Code AA-C22A44. Finish is ·
applied to 0. 7 mils (181Jm) minimum thickness onto chemically .etched
and pretreated aluminum. Color shall be RUSKIN (specify color name).
Louvers shall rece ive a 204-R1 clear anodize finish complying with
Aluminum Association Code-C22A31. Finish is applied to
chemically etched and pretreated aluminum to 0.4 mils (10iJm)
minimum surface depth by a 30 minute anodizing process. Louvers
shall rece ive a 215-R1 clear anodize finish complying with Aluminum
Association Code AA-C22A41. Finish is applied to chemically etched
and pretreated aluminum to 0.7 mils (18iJm) minimum surface depth
by a 60 minute anodizing process.
'AAMA 2605-11 is the most stringent performance specification for organic coatings or exterior aluminum finishes in the industry, requiring 10 years south Florida exposure.
tAAMA 2604-05 supersedes AAMA 605 and requires 5 years of south Florida exposure.
•RUSKIN'S Fluropon-based finishes (Fiuropon, Baked Enamel, Pearledize 50 and Pearledize 70) and prime coat finishes are provided by Valspar.
Twenty-year warranties are only available on extruded aluminum products, and are subject to restrictions. Consult RUSKIN for additional information.
FIN-1011/replaces FIN-510
RUSK/&®
GO GREEN,GO RUSKIN