HomeMy WebLinkAboutB17-0164_Base Scope of Work and products_1494007560.pdfBase Scope of Work
1. If applicable, obtain building permit, schedule inspections and close out permit.
2. Create job site safety plan and keep Material Safety Data Sheets on site.
3. Each day reasonable measures will be taken to protect the building envelope,
landscaping, property and residents/tenants of the job-site.
4. No more existing roofing shall be removed in any given day than that which can be made
watertight the same day.
5. Tear off and dispose of existing shingles, underlayment and ridge vents down to the
substrate. Any adhered ice and water shield will remain if it cannot easily be removed.
6. Temporarily remove existing wood siding and save for reinstallation as possible. Note
that existing wood siding is old and likely will require replacement on a change order
basis.
7. Replace any rotten/saturated plywood decking at a cost of $3.50 per square foot.
8. Install new three piece kicker flashing.
9. Install new side wall metal into angle changes. Adhere ice and water shield into L metal.
10. Adhere new Carlisle High Temp Bituthene underlayment above the prepared substrate.
a. Extend Bituthene up sidewall and headwall locations up to 32” at all locations as
possible to provide additional protection at roof-to-wall transitions.
b. Extend 12” of bituthene along eaves and wrap over 2” of vertical fascia board
below the edges of the roof.
11. Custom fabricate and install 24 gauge prefinished D-Style Drip Edge with an 8” Stretch
Out and 2” face above bituthene.
a. Strip in new Drip Edge with new bituthene and continue above.
12. Fasten GAF Timberline Shingles that include a Lifetime Warranty. Color to be chosen
by owners.
13. Install all flashing details at skylights, chimneys, headwalls, sidewalls, roof penetrations,
etc. according to both manufacturer’s and NRCA recommended specifications.
14. Thoroughly clean job site of all job-related debris.
Option #1: Snow Retention Standing Seam. S-5 Snow retention
Install S-5-E to seam brackets with.
Install Colorgurd with matching metal insert.
Standing seam Color Specs:
Color to be Medium Bronze
Picture below depicts up close view of Drexel Medium bronze.
80 psf
1730-1738 Vail Golf Course Townhomes
Color Barkwood