HomeMy WebLinkAboutB17-0092_A-720.1_1503950460.pdfSINGLE FLUSH
F1 RE: SCHEDULERE: SCHED.
DOUBLE FLUSH UNEVEN
F5
RE: SCHEDULE
4' - 0" 2' - 0"
RE: SCHEDULE
SINGLE NARROW LITE
(TEMPERED OR FIRE
RATED GLASS)
N1
RE: SCHEDULE
RE SCHED.
3' - 4" 8"
8"
8" RE: SCHEDULE
RE: SCHED.
SINGLE FULL GLAZED
(TEMPERED OR FIRE
RATED GLASS)
FG1
6" 6"
6"
1' - 0" SINGLE HALF LITE
(TEMPERED OR
FIRE RATED GLASS)
HG1
RE: SCHEDULE
RE: SCHED.
6" 6"
3' - 0" 6"
DOUBLE FLUSH
F3
RE: SCHEDULE
RE: SCHEDULE
EQ EQ
SINGLE NARROW LITE
(TEMPERED OR FIRE
RATED GLASS)
N2
RE: SCHED.
EQ EQ
8"
3' - 4" 8" 8" 8" 8"
RE: SCHEDULE
SINGLE FLUSH
WITH PEEP
HOLE
P1
RE: SCHEDULERE: SCHED.
3' - 6" 1' - 6"
EQ EQ
RE: SCHEDULE
RE: SCHED.
DOUBLE FULL GLAZED
(TEMPERED OR FIRE
RATED GLASS)
FG2
6"6" 6"
1' - 0" 6" 6"
D0a
D0b
4 7/8" 5/8" 3 5/8" 5/8" D0p
4 7/8" 5/8" 3 5/8" 5/8" D1sX
4 7/8" 5/8" 3 5/8" 5/8" D0s 4 7/8" 5/8" 3 5/8" 5/8" D1s
4 7/8" 5/8" 3 5/8" 5/8" J1b
5/8" 1 1/2" 1" 3" D0f
4 1/4" 3 5/8" 5/8" 4 7/8"
5/8" 3 5/8" 5/8"
D0bX
4 7/8" 5/8" 3 5/8" 5/8" L0k
5/8" 6" 6 5/8" 7 1/4" 5/8" 6" 5/8" F0s
D0sX 4 7/8" 5/8" 3 5/8" 5/8" SINGLE OR
DOUBLE DOOR
FRAME
HM1
RE: SCHEDULE 2"
2" RE: SCHED. 2"
/ A2A-720.1
/A1
A-720.1
DOOR / FRAME MATERIAL:
AL/G - ALUMINUM GLASS
HM - HOLLOW METAL
WD - WOOD
PT - PAINTED
STAIN - STAINED
MFR - MANUFACTURER
DOOR FINISH:
PL# - PLASTIC LAMINATE
ST - STAINED
CA - CLEAR ANODIZED
PT - PAINTED
KF - KYNAR FINISH
GL - GLASS
DOOR NOTES
1. CONTRACTOR TO FIELD COORDINATE ALL ROUGH
OPENINGS.
2. REFER TO SPECIFICATIONS FOR HARDWARE TYPES
AND SCHEDULE.
3. ALL FIRE RATED DOORS SHALL HAVE
UNDERWRITERS LABEL ON DOOR AND FRAME.
4. WHERE EXISTING DOORS TO REMAIN, TOUCH UP
SCUFFING TO MAKE DOOR FINISH LIKE-NEW.
5. AT EXISTING DOORS IN SCOPE: WHERE
SCUFFED,PATCH AND REFINISH TO LIKE-NEW
CONDITION. IN AREA C, REFINISH EXISTING
DAMAGED DOORS AND DOOR FRAMES.
DOOR AND HARDWARE SCHEDULE - ABBREVIATIONS LEGEND/NOTES
FRAME NOTES
1. CONTRACTOR TO FIELD COORDINATE ALL ROUGH
OPENINGS PRIOR TO ORDERING OR FABRICATING
ANY FRAMES.
2. ALL ELEVATIONS ARE DRAWN FACING THE
EXTERIOR OF THE WINDOW FRAME.
3. STOREFRONT FABRICATOR TO PROVIDE
REINFORCING AS REQUIRED
4. ALL DIMENSIONS ARE TO MASONRY OR ROUGH
OPENING UNLESS NOTED OTHERWISE, PROVIDE
PROPER SHIM CLEARANCE AS REQUIRED.
5. AT EXISTING FRAMES IN SCOPE: WHERE SCUFFED,
PATCH AND REFINISH TO LIKE-NEW CONDITION
GLAZING TYPES
S = PROVIDE TEMPERED
GLASS IN NON-RATED
DOORS WHERE INDICATED.
F = PROVIDE FIRE-
PROTECTION-RATED GLASS
MEETING OR EXCEEDING
THE RATING OF THE DOOR
ASSEMBLY WHERE
INDICATED
SEE SPECIFICATION FOR
ACCEPTABLE GLASS
TYPES.
UNO
6" TYP.
TYPE
RE: PARTITION
SECTION 09 2900 -
GYPSUM BOARD
08 1416 - FLUSH WOOD
DOOR
08 1113 - INTERIOR
HOLLOW-METAL FRAME
05 4000 - COLD-FORMED
METAL FRAMING
07 9200 - JOINT SEALANT07 9200 - JOINT SEALANT
TYPE
RE: PARTITION
SECTION 09 2900 -
GYPSUM BOARD
08 1113 - INTERIOR
HOLLOW-METAL FRAME
08 1416 - FLUSH WOOD
DOOR
07 9200 - JOINT SEALANT
05 4000 - COLD-FORMED METAL FRAMING
INTERIOR PARTITION TYPES
STRUCTURE
A 7/8" HAT CHANNEL
B 1 5/8" METAL STUD
C 2 1/2" METAL STUD
D 3 5/8" METAL STUD
E 4" METAL STUD
F 6" METAL STUD
G 3 5/8" DOUBLE METAL STUD
J 2 1/2" C-H METAL STUD
K 4" C-H METAL STUD
L 6" C-H METAL STUD
M 2x4 WOOD STUD
N 2x6 WOOD STUD
P 4" CMU
Q 6" CMU
R 8" CMU
S 12" CMU
Z 1 1/2" "Z" FURRING CHANNEL
D1s
X
EXAMPLE
D = 3 5/8" METAL STUD
1 = 1 HOUR FIRE RESISTANCE
RATING
s = SOUND PARTITION
FIRE RESISTANCE RATING*
0 NON-RATED
1 1 HOUR
2 2 HOUR
3 3 HOUR
4 4 HOUR
SUB-TYPE
a 6" ABOVE CEILING
b UNDERSIDE OF STRUCTURE
c UNDER SIDE OF CEILING
f FURRING
l LEAD LINED
k SECURITY MESH
p PARTIAL HEIGHT
s SOUND PARTITION
t THERMAL INSULATION
v SOUND PARTITION WITH (2) LAYERS
GYPSUM BOARD EACH SIDE
w SOUND PARTITION WITH (2) LAYERS
GYPSUM BOARD ONE SIDE
(1) LAYER OTHER SIDE
z TILE BACKER BOARD
SMOKE RATED*
X SMOKE PARTITION,
SMOKE BARRIER OR WALL
RESISTING THE PASSAGE
OF SMOKE
STRUCTURE
FIRE RESISTANCE RATING
SUB-TYPE
SMOKE RATED (OPTIONAL)
* SEE RATED PARTITION NOTE 2
GENERAL CONSTRUCTION AND LAYOUT NOTES
1. THE INTERIOR FRAMING SUBCONTRACTOR SHALL PROVIDE A DELEGATED ENGINEERED STUD DESIGN FOR ALL NON-STRUCTURAL METAL FRAMING FOR
WALLS AND CEILINGS. SUBMIT FRAMING SHOP DRAWINGS WITH DETAILS, PRODUCT SELECTIONS, AND ENGINEERING CALCULATIONS STAMPED BY A
LICENSED ENGINEER IN THE PROJECT JURISDICTION. ENGINEERING SHALL INCLUDE PROVISIONS FOR ELEMENTS ATTACHED TO/SUPPORTED BY THE
FRAMING. FASTENER DESIGN AND SELECTION IS ALSO REQUIRED. SUBMIT ICC ES EVALUATION REPORTS FOR EACH FASTENER. USE OF DIMPLED OR
PERFORMANCE ENHANCED SHAPED STUDS IS ACCEPTABLE. UNLESS OTHERWISE INDICATED DESIGN FOR A MAXIMUM DEFLECTION OF L/240 AT 5 PSF. AT
PARTITIONS TO RECEIVE CERAMIC TILE DESIGN FOR A MAXIMUM DEFLECTION OF L/360 AT 5 PSF. REGARDLESS OF DESIGN, PROVIDE 20 GA STUD AT A
MINIMUM.
2. ALL INTERIOR PARTITIONS ARE DIMENSIONED TO FINISHED FACE OF GYPSUM BOARD UNLESS NOTED OTHERWISE.
3. ALL STUDS SHALL BE FULL HEIGHT TO UNDERSIDE OF STRUCTURE UNLESS INDICATED OTHERWISE BY PARTITION TYPE.
4. BOTTOM OF GYPSUM BOARD SHALL BE 1/4” TO 3/8” ABOVE FINISH FLOOR UNLESS OTHERWISE INDICATED.
5. OFFSET STUDS AS NECESSARY TO ALIGN OUTSIDE FACES OF GYPSUM BOARD AT ADJACENT WALL TYPES WITH VARYING LAYERS OF GYPSUM BOARD.
6. PROVIDE DEEP LEG TRACKS (3" FLANGE) AT HEAD OF PARTITIONS AT ALL NON-LOAD BEARING PARTITIONS FOR EACH CONDITION THAT ALLOW FOR 1" OF
UPWARD MOVEMENT AND 1" OF DOWNWARD DYNAMIC MOVEMENT CAPABILITIES.
7. AT SLAB-ON-GRADE CONDITIONS PROVIDE DYNAMIC MOVEMENT REQUIREMENTS CALLED FOR IN THE GEOTECHNICAL INVESTIGATION (SOILS REPORT). IF
NO GEOTECHNICAL INVESTIGATION EXISTS CONTACT THE ARCHITECT FOR DEFLECTION CRITERIA.
8. ALL PARTITION TYPES MARKED BY A "t" SUFFIX (IE. D0t) SHALL BE INSTALLED WITH FULL HEIGHT AND WIDTH CONTINUOUS THERMAL INSULATION AND, IF
INDICATED, CONTINUOUS VAPOR RETARDER.
9. PROVIDE GYPSUM BOARD CONTROL JOINTS PER ASTM C 840 UNLESS OTHERWISE INDICATED ON DRAWINGS.
10. PROVIDE FIRE BLOCKING AND DRAFT STOPS PER CODE.
11. AT LOCATIONS ADJACENT TO GLASS SYSTEMS, GC TO VERIFY IN FIELD AND PROVIDE FASTENERS SUCH THAT THE INSTALLATION OF METAL FRAMING
DOES NOT ADVERSELY IMPACT THE GLASS SYSTEM.
RATED PARTITION NOTES
1. FIRE RATED ASSEMBLY CRITERIA TAKE PRECEDENT OVER ANY OTHER CONSTRUCTION CRITERIA.
2. REFERENCE LIFE SAFETY DRAWINGS FOR LOCATIONS OF FIREWALLS, FIRE BARRIERS, FIRE PARTITIONS, SMOKE PARTITIONS, SMOKE BARRIERS, AND
WALLS RESISTING THE PASSAGE OF SMOKE. COMPLY WITH IBC AND ANY OTHER APPLICABLE CODES FOR CONSTRUCTION REQUIREMENTS FOR EACH
RATED PARTITION TYPE.
3. REFERENCE SPECIFICATION SECTION 07 8413 –‘PENETRATION FIRESTOP’ FOR TREATMENT OF ANY PENETRATIONS THROUGH A FIRE RATED PARTITION.
NEEDS TO MEET UL LISTED TEST REQUIREMENT.
4. REFERENCE SPECIFICATION SECTION 07 8443 –‘JOINT FIRESTOP’ FOR TREATMENT OF TOP AND BOTTOM OF WALL JOINTS AND JOINTS TO ABUTTING
CONSTRUCTION. NEEDS TO MEET UL LISTED TEST REQUIREMENT.
5. PROVIDE AND SUBMIT FOR APPROVAL U.L. RATED HEAD OF WALL ASSEMBLIES FOR EACH RATED PARTITION CONDITION THAT ALLOWS FOR THE DYNAMIC
MOVEMENT INDICATED. IF ACCEPTABLE TO THE AUTHORITY HAVING JURISDICTION (AHJ), OBTAIN ENGINEERING JUDGEMENTS FOR JOB SPECIFIC
CONDITIONS NOT ADDRESSED BY TESTED ASSEMBLIES.
6. PROVIDE FIRE-RATED ACCESS DOORS AND FRAMES TO REACH DAMPERS OR CONTROL VALVES IN RATED PARTITIONS OR CEILING AS REQUIRED TO
MAINTAIN RATING. PROVIDE NONRATED ACCESS DOORS AT NON RATED CONSTRUCTION.
7. WHERE DEVICES ARE RECESSED IN A FIRE RATED PARTITION PROVIDE: A.) DEVICE RATED FOR INSTALLATION IN RATED PARTITIONS, OR B.)
CONSTRUCTION SUCH THAT FIRE RATING IS MAINTAINED BEHIND RECESSED DEVICE.
8. WHERE STRUCTURAL ITEMS SUCH AS HANGERS FOR STAIRS ARE EMBEDDED IN A RATED PARTITION CONSTRUCTION SHALL BE SUCH THAT FIRE RATING IS
MAINTAINED BEHIND EMBEDDED ITEM.
9. MARKING AND IDENTIFICATION: FIRE WALLS, FIRE BARRIERS, FIRE PARTITIONS, SMOKE BARRIERS AND SMOKE PARTITIONS OR ANY OTHER WALL
REQUIRED TO HAVE PROTECTED OPENINGS OR PENETRATIONS SHALL BE LABELED PER CODE.
10. PROVIDE SMOKE PARTITIONS TO LIMIT THE TRANSFER OF SMOKE. FILL JOINTS AND THE SPACE AROUND PENETRATING ITEMS SUCH AS DUCTS, PIPES,
CONDUITS, AND SIMILAR BUILDING SERVICE EQUIPMENT WITH AN APPROVED MATERIAL TO LIMIT THE PASSAGE OF SMOKE.
11. SEE A-720.1 FOR TYPICAL FRAMING DETAILS.
SOUND PARTITION NOTES
1. ALL PARTITION TYPES MARKED BY AN "s" SUFFIX (IE. D1s) SHALL BE INSTALLED AS A SOUND PARTITION INCLUDING: FULL HEIGHT AND WIDTH SOUND
ATTENUATION BLANKETS (SAB), ACOUSTICAL JOINT SEALANT AT TOPS AND BOTTOMS OF ALL WALLS AND PENETRATIONS, DRYWALL TO BE FROM FLOOR
TO DECK BOTH SIDES.
2. PROVIDE ELECTRICAL OUTLET BARRIER PADS IN SOUND PARTITIONS.
3. STAGGER DEVICES THAT PENETRATE OPPOSING WALL SURFACES IN ADJACENT STUD CAVITIES.
RATED ASSEMBLY INFORMATION
TOP OF WALL ASSEMBLY:
• STANDARD INTERIOR NON-BEARING WALL ASSEMBLY: UL HW-D-0495 OR EQUAL
• SHAFTWALL FLAT CONCRETE: UL HW-D-0496
• SHAFTWALL PARALLEL TO BEAM: UL HW-D-0497
• SHAFTWALL PAN DECK: UL HW-D-0504
• SHAFTWALL PROTECTED ROOF DECK: UL HW-D-0559
WALL ASSEMBLY:
• STANDARD INTERIOR NON-BEARING WALL ASSEMBLY : UL U419 OR UL U423
• SHAFTWALL ASSEMBLY: UL U415
SILL TRACK OF WALL ASSEMBLY:
• PROVIDE UL LISTED ASSEMBLY COMPLIANT WITH THE UL WALL ASSEMBLY AND THAT MATCHES FIRE RESISTIVITY OF THE WALL.
2901 Blake Street, Suite 100
Denver, CO 80205
303.861.8555
Denver
1
A
B
C
D
E
2 3 4 5 6
A
B
C
D
E
1 2 3 4 5 6
DPA Project:
Sheet Number:
COPYRIGHT - DAVIS PARTNERSHIP,
P.C.
Sheet Title:
Revisions Date
Sheet Information
Project Information
Issuance
Consultant
CENTRAL
WING
RENOVATION
7/11/2017
10:26:22 AM
15924.00
A-720.1
DOOR SCHEDULE,
PARTITION TYPES, AND
DETAILS
2017
07/11/17
PERMIT
RESUBMISSION
VAIL
VALLEY
MEDICAL
CENTER
180 S. Frontage
Road
West,
Vail, CO 81657
1/4" = 1'-0"
DOOR TYPES
PARTITION TYPES SCHEDULE
PARTITION
TYPE USE DESCRIPTION
PARTITION
WIDTH STRUCTURE CONSTRUCTION DESCRIPTION TOP OF WALL TO FIRE RATING
DESIGN
NUMBER
(FIRE)
3-5/8" STEEL STUDS UNDER SIDE OF STRUCTURE
D0a PARTITION WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE 6" ABOVE CEILING NON-RATED N/A
D0b PARTITION WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE NON-RATED N/A
D0bX SMOKE PARTITION WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE NON-RATED N/A
D0c FURRING WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE UNDER SIDE OF CEILING NON-RATED N/A
D0f FURRING WALL 4 1/4" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD ONE SIDE 6" ABOVE CEILING NON-RATED N/A
D0p PARTIAL HEIGHT PARTITION 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE PER ELEVATIONS NON-RATED N/A
D0s PARTITION WALL, SOUND BATTS 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE NON-RATED N/A
D0sX SMOKE PARTITION WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE NON-RATED N/A
D0X SMOKE PARTITION WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE NON-RATED N/A
D1b 1-HR PARTITION WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" TYPE "X" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE 1 HR UL U419
D1s 1-HR PARTITION WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" TYPE "X" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE 1 HR UL U419
D1sX SMOKE BARRIER WALL 4 7/8" 3-5/8" STEEL STUDS (1) LAYER 5/8" TYPE "X" GYPSUM BOARD EACH SIDE UNDER SIDE OF STRUCTURE 1 HR UL U419
J0bX 1-HR SHAFT LINER 3 1/8" 2 1/2" C-H STEEL STUDS (1) LAYERS 5/8" TYPE "X" GYPSUM BOARD ROOM SIDE WITH 1" SHAFTLINER BOARD
SHAFT SIDE
UNDER SIDE OF STRUCTURE 1 HR UL U415
J1b 3 1/8" UNDER SIDE OF STRUCTURE
L0k SHAFT LINER 6 5/8" 6" C-H STEEL STUDS (1) LAYERS 5/8" TYPE "X" GYPSUM BOARD ROOM SIDE WITH 1" SHAFTLINER BOARD
SHAFT SIDE
UNDER SIDE OF STRUCTURE NON-RATED N/A
1/4" = 1'-0"
FRAME TYPES
3" = 1'-0"
A1
HM DOOR FRAME JAMB
3" =
1'-0" A2
HM DOOR FRAME HEAD
DOOR SCHEDULE
ROOM LEAF FRAME
Hardware
Set
Fire
Rating
Wall
Widt
h Remarks REV
NAME
Door
Type
Door
Material Finish Width Height Thickness
Door
Glass
Type
Frame
Type
Frame
Material
Frame
Finish
LEVEL 1
100 CORRIDOR F1 WD ST 3' - 6" 7' - 0" 1 3/4" - HM1 HM PT 01 PER
LS101-1
4 7/8"
100A CORRIDOR F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 13 20 4 7/8"
101 STAFF RECESS F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 04 20 4 7/8"
102 RECEPTION FG2 WD ST 7' - 0" 7' - 0" 1 3/4" F HM1 HM PT 05 20 5" EXISTING WALL - GC TO VERIFY IN FIELD
102A STORAGE F1 WD ST 2' - 0" 7' - 0" 1 3/4" - HM1 HM PT 13 - 5"
102B STORAGE F1 WD ST 3' - 0" 7' - 0" 1 1/2" - - - PT 24 - 5" RE-USE EXISTING FRAME
104 TLT F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 16 - 5"
104A CONTROL F5 WD ST 6' - 0" 7' - 0" 1 3/4" - HM1 HM PT 06 - 5" EXISTING WALL - GC TO VERIFY IN FIELD
104B HOT LAB F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 07 - 4 7/8"
104C PT TOILET F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 08 20 4 7/8"
104E ESR / SOILED HOLD F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 11 20 4 7/8"
105A NUCLEAR MEDICINE
CAMERA
F5 WD ST 6' - 0" 7' - 0" 1 3/4" - HM1 HM PT 09 - 4 7/8" PROVIDE WALL PROTECTION ON PUSH SIDE OF
DOOR; FINISH TO MATCH ADJACENT WALL
PROTECTION. PROVIDE ARMOR PLATE ON PULL
SIDE OF DOOR.
105D NUCLEAR MEDICINE
CAMERA
F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 12 20 4 7/8" PROVIDE WALL PROTECTION ON PUSH SIDE OF
DOOR; FINISH TO MATCH ADJACENT WALL
PROTECTION. PROVIDE ARMOR PLATE ON PULL
SIDE OF DOOR.
106 OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14 20 5"
108 STORAGE F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 13 20 4 7/8"
111 OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14 - 4 7/8"
112 OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14 - 4 7/8"
114
OFFICE N1 WD ST 2' - 10" 7' - 0" 1 3/4" F HM1 HM PT 14 20 4 7/8"
116A OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14 20 5" EXISTING WALL - GC TO VERIFY IN FIELD
116B COPY HG1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 14 - 4 7/8"
117A OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14 20 4 7/8" DOOR TO BE F1 TYPE. REPLACE DOOR HW SET IF
EXISTING DOOR TO REMAIN; GC TO VERIFY
EXISTING WALL IN FIELD.
117B OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 14 - 4 7/8"
117C OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 14 - 4 7/8"
118A STORAGE F3 WD ST 4' - 0" 7' - 0" 1 3/4" - HM1 HM PT 15 - 4 7/8"
119 OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14 20 5" EXISTING WALL - GC TO VERIFY IN FIELD
120A VEST F1 WD ST 3' - 6" 7' - 0" 1 3/4" - HM1 HM PT 17A 20 4 7/8"
120B VEST P1 WD ST 3' - 6" 7' - 0" 1 3/4" - HM1 HM PT 17B - 4 7/8"
120D PREP AREA HG1 WD ST 3' - 0" 7' - 0" 1 3/4" S HM1 HM PT 19 - 4 7/8" COORDINATE WITH HOOD DIMENSIONS
120E CHEMO MIXING ROOM HG1 WD ST 3' - 6" 7' - 0" 1 3/4" S HM1 HM PT 20 - 4 7/8"
120G CLEAN ROOM HG1 WD ST 3' - 6" 7' - 0" 1 3/4" S HM1 HM PT 20 - 4 7/8"
121 OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" S HM1 HM PT 14 - 4 7/8"
122 OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14 20 5" EXISTING WALL - GC TO VERIFY IN FIELD
123 CONFERENCE ROOM F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 19.1 - 5"
126 OFFICE HG1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 14
- 4 7/8"
127 BREAK N1 WD ST 3' - 0" 7' - 0" 1 3/4" S HM1 HM PT 25 20 5"
127A STORAGE F1 WD ST 2' - 0" 7' - 0" 1 3/4" - HM1 HM PT 11 - 5"
128A OFFICE N1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 17 20 4 7/8"
128B OFFICE N1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 17 20 4 7/8"
128C OFFICE N1 WD ST 3' - 0" 7' - 0" 1 3/4" F HM1 HM PT 17 20 4 7/8"
130A STORAGE F1 WD ST 4' - 0" 7' - 0" 1 3/4" - HM1 HM PT 22 20 4 7/8"
130B STORAGE F1 WD ST 4' - 0" 7' - 0" 1 3/4" S HM1 HM PT 22 20 4 7/8"
131A STORAGE F1 WD ST 4' - 0" 7' - 0" 1 3/4" - HM1 HM PT 22 20 4 7/8"
131B STORAGE HG1 WD ST 3' - 8" 7' - 0" 1 3/4" F HM1 HM PT 22 45 4 7/8" PROVIDE ONE-WAY "MIRROR" FILM ON STORAGE
ROOM SIDE OF LITE, 3M OR SIMILAR
LEVEL 2
120V PT TLT F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 08A 20 4 7/8" RESCUE HARDWARE
120Y CORRIDOR F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 17 45 4 7/8"
121Y MEETING/WORK F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 17 45 4 7/8"
201C SLEEP F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 20 4 7/8"
201D ULTRASOUND F1 WD ST 3' - 6" 7' - 0" 1 3/4" - HM1 HM PT PER
LS101-1
4 7/8"
201E SLEEP F1 WD ST 3' - 0" 7' - 0" 1 3/4" - HM1 HM PT 20 4 7/8"
1
1
DOOR SCHEDULE
ROOM LEAF FRAME
Hardware
Set
Fire
Rating
Wall
Widt
h Remarks REV
NAME
Door
Type
Door
Material Finish Width Height Thickness
Door
Glass
Type
Frame
Type
Frame
Material
Frame
Finish
LEVEL 1
XX118B CORRIDOR - - EXISTING 3' - 0" 7' - 0" 1 3/4" - - - PT 18A - 1' - 2" REPLACE DOOR HARDWARE; GC TO VERIFY
EXISTING WALL IN FIELD. PROVIDE NEW DOOR
PULL TO EXTERIOR, PULL TO MATCH EXISTING
PULL ON DOOR XX132.
XX132 CORRIDOR - - EXISTING 3' - 0" 7' - 4 1/2" 2" - - - PT 18B - 5" EXISTING WALL - GC TO VERIFY IN FIELD. REPLACE
HARDWARE.
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
ADDENDUM 1 05/23/17 1
RFC0005 06/09/17 2
ADDENDUM 3 06/27/17 3
ADDENDUM 5 Date 16 4
08/28/17