HomeMy WebLinkAboutB17-0277_cut sheets.pdf 6/21/2017 Products-Compact Laundry-Compact Washers-24'Washers-WAT28402UC
Home Appliances
Home Appliances Products Compact Laundry Compact Washers 24'Washer WAT28402UC
24" Compact Washer
800 Series - White/Chrome
WAT28402UC
Price$1,399.00
Add To Cart
- `, -- ( Where to Buv
Customer Rating:
***** 4.8 33 Reviews
32 out of 33(97%)reviewers recommend
---___ this product
Y
4
Aft. 0
The 800 Series Washer & Dryer are One of the Few ENERGY
STAR® Qualified 24" Pairs Offering Quality, Water Protection &
Design
• Wash 5 men's dress shirts in just 15 minutes.
• AquaStop®Plus provides extra protection against water damage.
• SpeedPerfectTM Provides Up to 40%Faster Washing Time*
• EcoSilenceT"Motor Delivers Quiet,Efficienct&Long Lasting Performance.
• Exceeds the March 2015 ENERGY STAR Water Consumption Standards
•` VIDEO
Specifications
Wash Up to 18 Towels In One Load
Interior LED light
http://www.bosch-home.com/us/products/compact-laundry/compact-washers/24-washers/WAT28402UC.html#tab2 1/3
6/21/2017 Products-Compact Laundry-Compact Washers-24'Washers-WAT28402UC
•
Neat White-European Design
Large Door with Chrome Door Ring
• Large LED Display with Remaining Time
Electronic Control
Snag Free Structured Stainless Steel Drum
Stackable-Space Saving
Anti-vibration Circular Side Walls Reduce Vibration
v Performance
The Wave-shaped Structured Drum Delivers a Powerful yet Gentle Wash.
Sensor-controlled Automatic Washing Programs
ActiveWater®Technology for more Efficient Water Use
Wave Shaped Drum Pattern for Powerful&Gentle Cleaning
Up to 1400 rpm Maximum Spin Speed
15 Wash Cycles:Permanent Press,Permanent Press Heavy Soil,Permanent Press Light Soil,Delicates,
Quick 30 min,Rinse/Spin,Hand Wash/Wool,Drain,cotton normal,whitest whites,towels,sanitize,super
quick 15min,bulky large items,drum clean
Sanitize Cycle Heats Water Up to 170"F to Kill Bacteria
9 Options:SpeedPerfectTM,Temperature,Finish in,Extra Rinse,Prewash,Spin Speed,Start/Pause,Child
• Lock,Signal
v Efficiency
ENERGY STAR®Qualified
Exceeds the March 2015 ENERGY STAR Water Consumption Standards
Internal Water Heater Heats Water Quickly and Efficiently
v Convenience
Stackable-Space Saving
Washer Plugs into Dryer for Easy Installation
AquaStop®Plus Provides Extra Protection Against Water Damage.
24 Hour Delay Start Timer
Super Quick 15 min Cycle
End of Cycle Signal
Anti-vibration Circular Side Walls Reduce Vibration
v Capacity
Wash Up to 17.6 lbs—Fits Up to 18 Towels in One Load
Specifications
General Properties
Tub Material Stainless steel
Door ring chrome,blackgray
Buttons chrome
Dial chrome
Display Yes
Maximum spin speed(rpm) 1,400 rpm
•
Spin speed options Variable
Suds Sensor Yes
Unbalance Sensor Yes
Status indicator LED-display
Internal Water Heater Yes
Stackability Yes
Capacity
Capacity(cu.ft.) 2.2 Cu Ft
Cycles&Options
Number of Options 7
Active wear No
http://www.bosch-home.com/us/products/compact-laundry/compact-washers/24-washers/VVAT28402UC.htm1#tab2 2/3
6/21/2317 Products-Compact Laundry-Compact Washers-24'Washers-WAT28402UC
Dark colors No
Rinse Plus Option Yes
Quick Wash Option Yes
Quietness
Noise level washing(dB(A)re 1 pW) 50 dB(A)
Efficiency
Energy Star®qualified Yes
Total annual energy consumption(kWh) 84 kWh
Water Consumption(gal/y) 2320 gal
Certifications
Approval certificates CE,UL,VDE
Installation Requirements
Waw(W) 2300 W
Current(A) 12 A
Frequency(Hz) 60 Hz
Volts(V) 208-240 V
Plug type 240V-3 prong
Dimensions&Weight
Overall appliance dimensions(HxWxD) 33 1/4"x 23 1/2"x 24 1/4"
(in)
Product packaging dimensions(HxWxD) 34 1/4"x 25 1/4"x 26 3/4"
(in)
Power Cord Length 69"
Length outlet hose(in) 57.00
Length inlet hose(in) 47.00
Net weight(lbs) 163 lbs
Gross weight(lbs) 165 lbs
http://www.bosch-hom e.com/us/products/com pact-laundry/com pact-washers/24-washers/W AT28402U C.htm I#tab2 3/3
24" Compact Condensation Dryer
800 Series—WTG86402UC
0 BOSCH
Invented for life
General Properties Technical Details(Continued)
J . Dryer type Condensing Power cord included Yes
Drum material Stainless Steel Power cord length (in) 63 (Full Length)
Interior light Yes (LED) Drain hose length (in) 78 (Full Length)
, Ventless drying y g (no Yes Door hinge Right Side
`• ducting)
__ (Reversible)
Stackable Yes Dimensions&Weight
Silence level (dBA) 63 Overall appliance 33 1/4" x 23 1/2"
-a..,
Programs (No.), (15), [Super Quick dimensions (HxWxD)(in) x 25"
[Special] 15,Anti Shrink] Net weight (lbs) 99 lbs
Options (No.), [Special] (6), [Dry Level, Minimum stack height 67 3/4"
WTG86402UC Finished In] (in)
White Energy consumption 311 ADA compliance
(kWh/yr) — Meets ADA height and access requirements
The 800 series laundryENERGY STAR® when installed on pedestal.
qualified Yes — Meets ADA operable parts requirements for
pair is ENERGY STAR® Capacity controls and lint filter.
qualified and offers
Capacity (cu. ft.) 4.0 Accessories—Optional
matching quality, water
protection, design and Relative load 18 bath towels — -
fast wash and dry cycles. Design Elements /
Features&Benefits Door ring Chrome
Quietest dryer in the 24" Control type Touch WTZ11400 WTZ20410
category. Dial Chrome design, Stacking kit with shelf Stacking kit without shelf
Only ENERGY STAR®dryer metal material
in 24" compact laundry Bosch logo on door glass Yes '—....____
market. Technical Details j
Bosch Washers and Dryers Energy source Electric
are the only ENERGY
STAR® 24" laundry pair. Watts (W) 2,800
WM220500 W MZ20600
Condensation drying Circuit breaker (A) 30 Pedestal Drying Rack
doesn't require ducting. Volts (V) 208/220-2.40
Perfect design match to t c"ron�
Bosch 800 series washer. Current (A) 13 I co<moi
Frequency (Hz) 60 \cePfeas7
etm,?o' `=
Washer plugs into dryer whiz!
for easy installation. Plug type 240V; NEMA 14-30 r i Dols
Dry up to 18 towels in one (4 prong) or"'
load. r" Dry v p611±-'!i'-'_ ' — �
c us ,undWfd
MEMO LISTED
For help and assistance with Bosch accessories please visit:www.bosch•eshop.com/eshop/bosch/us or call 1.800.944-2904 Mon-Fri Sam to 6pm PST Sat 6am to 3pm PST
Notes: All height,width and depth dimensions are shown in inches.BSH reserves the absolute and unrestricted right to change product materials and specifications,at any time,without
notice.Consult the product's installation instructions for final dimensional data and other details prior to making cutout.Applicable product warranty can be found in accompanying product
literature or you may contact your account manager for further details.
Warranties:Bosch warrants that the Product is free from defects in materials and workmanship for a period of three hundred and sixty-five(365)days from the date of purchase.The foregoing
timeline begins to run upon the date of purchase,and shall not be stalled,tolled,extended,or suspended,for any reason whatsoever.This Product is also warranted to be free from cosmetic
defects in material and workmanship(such as scratches of stainless steel,paint/porcelain blemishes,chip,dents,or other damage)to the finish of the Product,for a period of thirty(30)days
from the date of purchase or closing date for new construction.This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts,as well as
differences caused by kitchen lighting,product location,or other similar factors.This cosmetic warranty specifically excludes any display,floor,"As Is".or"B"stock appliances.
For more information on our entire line of products,go to www.bosch-home.com/us or call 1.800.944.2904
A BSH Home Appliances Corporation.All rights reserved.Bosch is a registered trademark of Robert Bosch GmbH. 09/15
24" Compact Condensation Dryer
800 Series—WTG86402UC
11) BOSCH
Invented for life
Installation Details
Dimensions in inches Washer plugged into the dryer
mimmosmi
1 1/B"k' 25" 42 '/8"
/. ...._,.
�� Dryer Min.Stack
power Height 67 a/a"
331/4"
II cord (with stacking kit)
IIIIIiIIi ,
...,..
peace(•,
I . 11.11ee.ee
",,' eeera�
J ' 8 11/2Zu i (Q
. Dryer
drain
5/}
t ..61:hall hose
Washer
23'/i'H power
is 1/a" cord
�1111 �� 23%"
\%410 j 31/4" Washer drain hose
\ 2%" ,-3ii
\ZDrte- Optional Pedestal
o „
o
,f
� 180°/
Flp... 23518r373/4" \�0
L.
133/II4;:!
.4 ,r, 401SPUMOI
jjjjR.
10 1/a" •
1
r' 5/8'43/8„
measurements in inches
For help and assistance with Bosch accessories please visit:www.bosch•eshop.com/eshop/bosch/us or call 1-800-944-2904 Mon•Fri Sam to 6pm PST Sat 6am to 3pm PST
Notes: All height,width and depth dimensions are shown in inches.BSH reserves the absolute and unrestricted right to change product materials and specifications,at any time,without
notice.Consult the product's installation instructions for final dimensional data and other details prior to making cutout.Applicable product warranty can be found in accompanying product
literature or you may contact your account manager for further details.
Warranties:Bosch warrants that the Product is free from defects in materials and workmanship for a period of three hundred and sixty-five(365)days from the date of purchase.The foregoing
timeline begins to run upon the date of purchase,and shall not be stalled,tolled,extended,or suspended,for any reason whatsoever.This Product is also warranted to be free from cosmetic
defects in material and workmanship(such as scratches of stainless steel,paint/porcelain blemishes,chip,dents,or other damage)to the finish of the Product,for a period of thirty(30)days
from the date of purchase or closing date for new construction.This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts,as well as
differences caused by kitchen lighting,product location,or other similar factors.This cosmetic warranty specifically excludes any display,floor,"As Is",or"B"stock appliances.
For more information on our entire line of products,go to www.bosch-home.com/us or call 1.800.9442904
0 BSH Home Appliances Corporation.All rights reserved.Bosch is a registered trademark of Robert Bosch GmbH. 09/15
24" Compact Condensation Dryer
800 Series — WTG86402UC
BOSCH
Invented for life
Installation Details
Closet: Stacked Closet: Stand Alone (shown)
or Side by Side Clearance requirements
_� (Minimum)
I:31
'�'� -. B A Both Sides 5/8 in.
E' B Top 6 1/4 in.
C Rear 2 1/2 in.
\ y D Front 2 1/2 in.
H MIVentilation Area (Minimum)
F O ���^ riiiiii"-
� E Top 63 sq.in
1 A K
Mil I F Bottom 63 sq.in.
G V �A,. Vent Spacing
�\\�
4--
J G37 in.
41110 •-D J 36n.r
..../ K 29 in.
Enclosure Dimensions
Under Counter: (Preferred) Under Counter: (Less Preferred)
Minimum opening dimensions
-- a 28 in.
/ b 23 7/8 in.
c 34 1/2 in.
E & F are minimum area sizes
H I E 63 sq. in.
a r� G F 63 sq. in.
G & H actual spacing
\b dimensions for min. open
area sizes
If the front of the appliance is covered,
ventilation openings must be installed as G 3 in.
Front of the appliance fully shown and front/rear clearances adhered H 14 in.
open. No doors or coverings. to according to closet installations.
For help and assistance with Bosch accessories please visit:www.bosch-eshop.com/eshop/bosch/us or call 1.800-944.2904 Mon-Fri Sam to 6pm PST Sat 6am to 3pm PST
Notes: All height,width and depth dimensions are shown in inches.BSH reserves the absolute and unrestricted right to change product materials and specifications,at any time,without
notice.Consult the product's installation instructions for final dimensional data and other details prior to making cutout.Applicable product warranty can be found in accompanying product
literature or you may contact your account manager for further details,
Warranties:Bosch warrants that the Product is free from defects in materials and workmanship for a period of three hundred and sixty-five(365)days from the date of purchase.The foregoing
timeline begins to run upon the date of purchase,and shall not be stalled,tolled,extended,or suspended,for any reason whatsoever.This Product Is also warranted to be free from cosmetic
defects in material and workmanship(such as scratches of stainless steel,paint/porcelain blemishes,chip,dents,or other damage)to the finish of the Product,for a period of thirty(30)days
from the date of purchase or closing date for new construction.This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts,as well as
differences caused by kitchen lighting,product location,or other similar factors.This cosmetic warranty specifically excludes any display,floor,"As Is",or"B'stock appliances.
For more information on our entire line of products,go to www.bosch-home.com/us or call i-800.944'2904
0 BSH Home Appliances Corporation.All rights reserved.Bosch Is a registered trademark of Robert Bosch GmbH. 09/15
Environmentally friendly use of your a Save energy and detergent when washing lightly and
washer normally soiled laundry.
Your new Bosch washing machine is designed to use • Energy-saving mode: The display panel lighting goes
water, energy and detergent in a highly efficient way to out after a few minutes and Start/Pause flashes. To
help reduce operating costs, conserve resources and activate the display, touch any button.
protect the environment. Energy-saving mode is not activated if a program is
• Utilize the maximum amount of laundry for the running.
appropriate program. • If the laundry will be dried in a dryer afterwards, select
• Avoid using too much detergent. spin speed according to the dryer manufacturer's
instruction.
• Wash normally soiled laundry without a prewash.
Dimensions and clearances required
Appliance dimensions Length of power cord and water supply
hoses
a
To left of washer* To right of washer*
U.S. Metric U.S. Metric
Electric power 25 in. 64 cm 43 in. 109 cm
cord
!AIL Water supply 43 in. 109 cm 28 in. 71 cm
hoses
C)::41111
Drain Hose 27 in. 69 cm 46 in. 117 cm
* All distances are measured from indicated side when
facing front of washer.
180° 90° ��—
e
Label Dimension U.S. Metric
a width 23.6 in. 60 cm
b depth 25 in. 64 cm
(to front of door)
c height (minimum*) 33.2 in. 85 cm
height (maximum*) 33.8 in. 86 cm
d side clearance 15.8 in. 40 cm
(door open 180°)
e depth 42.5 in. 108 cm
(door open 90°)
Weight approximate gross 164 lbs. 77.2 kg
* height of appliance depends on the extension of the
height adjustable appliance feet.
8
Installation types Stand alone(shown)or Side-by-Side
Stacked washer and dryer
A Bosch dryer of the same dimensions can be placed on
,.top of the washer to save space.
Use the special washer-dryer stacking kits (noted in
Bosch Dryer User Manuals) which can be purchased
from customer service or your local dealer.
- , B
'r.
H �'
— K
L. lC
�„R J A
/ )
G k ,j
d
rc
A Under counter(Preferred)
1
Clearance requirements (Minimum)
A Both Sides 0.6 in. 1.5 cm
B Top 6.3 in. 16 cm '
C Rear* 2.5 in. 6.4 cm
D Front 2.4 in. 6.1 cm
* Rear clearance as close to wall as venting or water AH c
connection will allow. If the washer is installed with a
dryer, the greater rear clearance for the dryer venting is
required for the laundry pair.
Ventilation area(Minimum)
E Top 63 sq. in. 404 sq. cm B
F Bottom 63 sq. in. 404 sq. cm
Vent spacing (actual not minimum dimensions) Front of the appliance fully open.
G 37 in. 94 cm
No doors or coverings.
H 26 in. 66 cm Minimum opening dimensions
J 3 in. 7.6 cm A 28 in. 71.1 cm
K 29 in. 73 cm B 23.8 in. 60.5 cm
C 35.5 in. 90.2 cm
9
Under counter(Less Desirable) If front of the appliance is covered ventilation openings
must be installed.
E & F are minimum area sizes
E 63 sq.in. 404 sq.cm
F 63 sq.in. 404 sq.cm
/ G & H actual spacing dimensions for min. open area
sizes
G 3 in. 7.6 cm
H 14 in. 35.6 cm
dr-
G :
T_,
Installation instructions
A WARNING NOTICES
• Frozen hoses can tear or burst. Do not install the
RISK OF FIRE, ELECTIRICAL SHOCK OR INJURY washing machine outdoors or in an area exposed to
TO PERSONS freezing condtions.
To reduce the risk of fire, electric shock or injury to a If the washing machine is located in a room which will
persons, read the Important Safety Instructions at be exposed to temperatures below freezing, or if it is
the front of this manual before installing or operating located in a cabin that is being shut down for the
this appliance. winter, any residual water in the pump or water inlet
hose(s) must be drained.
• Take care not to damage the washing machine. Do
A CAUTION not hold on to protruding parts (e.g. door)when lifting.
Do not push against the appliance door glass due to
WASHING MACHINE IS HEAVY risk of damage.
Use additional help and care when lifting and o In addition to the safety information listed here, the
positioning. local water and electric authorities may have special
requirements that must be followed.
Introduction If in doubt, have the appliance installed by an
authorized technican.
Read these installation instructions completely and • Hidden surfaces may have sharp edges. During
carefully before starting to install your new washing service use caution when reaching inside the washer
machine. The information contained can save you time housing.
and effort and will help to ensure optimum performance
of your new washer. Be sure to observe all warnings and
cautions. These installation instructions are intended for use by
qualified installers. In addition to these instructions, the
installation must comply with:
-for the United States- National Electrical Code, ANSI/
NFPA70 - and latest editions of the State and municipal
and/or local regulations.
-for Canada -Canadian Electrical Code C22.1 - and the
latest editions of the Provincial, Municipal and/or local
regulations.
10
Tools needed Parts provided with your washer
The following tools may be helpful during installation of Back side of the washing mashine
your washer.
11 1—ill 111
LLI
,_r
'1 '"'
I-1 2
• 13mm socket for removing the transport bolts. I Z,-,,, 3
• 17mm wrench for adjusting the appliance feet. *1* •.�
• Bubble level for leveling the appliance. 1\�
Waste disposal
Disposal of Packaging Materials ��
After unpacking your new appliance dispose of the �` as=
protective packaging materials in an environmentally .:.k �, 4
friendly way. Ask your dealer or inquire with your local
authority regarding currently acceptable means of
disposal. _
A WARNING d 1
WARNINGS FOR CHILDREN
Do not let children play with packaging and 1 Power cord with plug
associated parts to avoid risk of choking or
suffocation. 2 Literature pack; contents:
• User manual
Disposal of Your Old Appliance . Warranty
Your old appliance can be recycled if it is no longer to be . Covers with hose holders
used. Prior to disposing of your old appliance observe 3 Drain hose
the following precautions to reduce safety risks.
4 Elbow to form the hose to fit the drain pipe
A WARNING
TO AVOID RISK OF INJURY OR DEATH, DO THE
FOLLOWING
- after unplugging the old appliance, remove the
electric power cord and dispose of properly.
- remove the door or permanently disable the door
lock to prevent children from being locked inside.
11
Washer drum contents .1 Installation Step Page
Two AquaShield ® water supply hoses are shipped in Level the washing machine (as low Leveling
the washer drum. Be sure to remove each of these items as possible) the
from the drum before using the washer. washer; Page
16
Before washing laundry, run the —* Before
loading your
Drum Clean program
first load of
laundry; Page
19
Importance of installing on a solid, level
floor
Your new Bosch washing machine utilizes high spin
speeds to achieve superior water removal from your
laundry resulting in reduced drying time. It is important to
install your washing machine on a floor that will provide
,. firm support.This prevents the washer from experiencing
excess vibration during spinning that could cause the
^ .�:,, washer to move or be noisy.
1a1.#�'� • 5 The installation surface must be solid and level in both
�'..;+,-�•a�*..�,,:�+'r directions. Avoid installing your washer on soft surfaces
; y�to�``-%��`'�:;�' such as floors with carpet or foam backed covering
:, __ tot �;� material.
,,,.•�;.•' • 6 If installing the washer on a wooden floor, observe the
`•.,,2,11
`r:.alnnl••••• following:
install the washer in a corner for better support if
5 Hot water AquaShield ® hose possible.
6 Cold water AquaShield ® hose . if necessary, reinforce the floor by screwing a water
NOTICE: If any parts are missing please notify your resistant wooden board to the floor (minimum of
dealer immediately. 1.18 in./30 mm thick).
Set up on a pedestal with drawer Remove the transport bolts
Pedestal item number: WMZ 20490
Mount washer on the pedestal according to the A CAUTION
instructions in the installation kit. DAMAGE TO THE APPLIANCE OR INJURY
POSSIBLE
Installation checklist . The machine is secured for transport with
Review the following list and check off each step as it is transport bolts.
completed during installation. Transport bolts that are not removed can damage
the drum during operation of the machine, the
Installation Step Page washer will vibrate, and it will be much noisier
If installing to a pedestal (base), —> Remove during spin cycles if the transport bolts are not
complete the base installation the transport removed before use.
before removing the transportation bolts; Page 12 Be sure to remove all 4 transport bolts
bolts completely before first use. Keep the transport
Completely remove all four ship- —. Remove bolts.
ping bolts keeping the bolt and the transport If a pedestal was purchased with the washer, it
bushing assemblies intact bolts; Page 12 must be installed first, prior to removing the
Connect the water supply hose and Water transport bolts. Please consult the pedestal
installation instructions.
drain hose connections; In order to prevent transport damage during later
Page 13 transport, be sure to re-install the bolts before
Connect the electrical power —* Electrical transport.
connection; P
age 16
Slide the washing machine into its
final location
12
1. Remove hoses from the brackets. Water connections
Water supply hose connections
NOTICES
4x
I O ' . The washing machine must only be operated with cold
and hot (max. 140 °F/60 °C) tap water. Do not
Q :,)
connect the appliance to the mixer tap of a
pressurized hot-water boiler.
_- . To prevent water damage, the hot and cold water
valves should be accessible when the washing
machine is in place and should always be turned off
when the washing machine is not in use.
2. Loosen and remove all 4 transport bolts. . If installing the washing machine in a new building or a
Remove the sleeves. Take the power cable out of the building in which the plumbing system was recently
brackets. installed or upgraded, flush the lines before installing
the washing machine to remove any sand, dirt or
4 _ residue.
LI
4x • To prevent leakage or water damage, follow the
fitrN instructions in this chapter.
itiN
�/�1 ►�� �y� n If in doubt, have the appliance installed by an
)is '�i' ) authorized technician.
Connect your washer to the wall faucets using the
' `— included AquaShield® water supply hose.
ill Observe each of the following:
. Only use the new water supply hose shipped with your
3. Place covers over the transport bolt holes washer. Never use old used hoses.
Four plastic covers are provided in the small parts bag , The water supply hoses must not be kinked, bent, or
included with your washer. Separate these covers and pinched causing hose damage or restricting water
install one in each hole where the transport bolts were flow.
removed.
Lock covers firmly by pressing on the snap hook. • The water supply pressure must be between 14,5 to
Insert hose holder. Secure hoses in the hose holders. 145 psi(1 -10 bar)with a minimum of 2.2 U.S. gallons
(8 liters) of flow per minute. A pressure regulator valve
must be installed if the maximum water pressure is
4x ,,
exceeded.
(.:r1-
•-____
. Make sure the water supply faucet is easily accessible
•
0 • �` when the washer is in use. The faucet should be
;\��� ', ', � �' turned off if the washer is going to be unused for
'� extended periods of time.
,\ vel,
t Make sure rubber washers are in place at both ends of
the water supply hose. Missing washers could cause
leaks.
• The connection points are under full water pressure.
NOTICE: Keep the assemblies together and store them Turn on the water tap and check for leaks.
for later use such as when moving the washer. . Periodically inspect the water supply hose and replace
with a new hose if cuts, kinks or leaks are observed.
4x
ty-1�, .a'
r ' a
jfr
If
13
BLUE <<li[�a♦ V
sk 0 000 "'I
-.;,,, 4_5,9
Water connection hoses
red - Hot water-hose
• blue-Cold water-hose
---I ` �� ►�_��_ 1 `ti
x. IIIrm' l.
m eU _ max;9D' % ,-_
``___
Attach this end to water tap. Hand tighten only.
Position hoses as shown when routing hoses to left side
N� �� of washer (facing from front).
ii
it ---______________: fik
1 Jiro ..,, ,
vrtle, lei., 61 1 (4.8,
•
....___...,
c - .... .4, .JE
,,_ .., I ......i 1
Attach this end of the hose to the back of the washing 1 [i,, , i
.-„ A
re
machine as shown in the following pictures. Be sure to
use clamps and route hoses as instructed. Hand
tighten only.
Position hoses as shown when routing hoses to right
side of washer (facing from front).
N No
(r
>x u
14
About the AquaShield®Hose._._.-------T.I.i.7:--::-1?T:: Sink siphon
O1 _
C.',
1 ._,__ _.,.._,.. , .
r-------1--_441 1 r
The AquaShield® hose prevents potential flooding in the
event the hose develops an internal leak. If the hose Secure the drain hose to the sink siphon using a 0 0.9 -
leaks, the indicator turns red and water flow is blocked. 1.6 in. (20-44 mm) hose clip (available from a hardware
Once the internal valve in the hose activates (indicator is store).
red) the hose must be discarded. Contact customer
service for a replacement. Wash Basin
AquaStop®Plus a WARNING
The AquaStop® Plus feature detects water leaks on the
internal base, shuts down operation and automatically SCALDING
pumps out water so it cannot make contact with the floor. When washing at high temperatures, there is a risk
This feature along with the internal mechanical valve of of scalding if you touch hot suds, e.g. when
the double-walled AquaShield® hose makes pumping out hot suds into a wash basin.
AquaStop® Plus one of the most comprehensive water Do not reach into the hot suds.
safety systems available.
Water drain hose connection NOTICE: APPLIANCE DAMAGE/DAMAGE TO TEXTILES
If the end of the drain hose touches the discharge water
NOTICES (water drained from washer) it (the discharge water) can
• Do not reuse an old drain hose. Only use the drain be sucked back into the appliance and may damage the
hose and parts included with your washer. appliance or textiles.
• Do not kink or modify the water drain hose. Make sure that:
• There is no stopper in the sink drain.
Height of drain point a The end of the hose does not touch the discharge
Height difference between the floor and drainage point: water.
max. 39 in. (100 cm). • The sink drain is free flowing and not partially
clogged.
Types of drainage hookups
Standpipe
a a I ---- —.:\M-------
i ,____
®_�"��\
Ari ladrain �, ork • i
fa
um .si
ii!ikr,...., *,......0111 ------__ low ,
�_
r
.le tie f2RRE)
- Attach the drain hose securely to the wash basin.
NOTICE: In any multi-story installation, the washer
Attach the drain hose to the elbow included with your should be installed on a drained floor to prevent water
washer. damage to rooms below in the event of a leak.
Position the elbow on the drain hose 4" from end of hose
as shown. Insert this section of the drain hose into the
drain pipe. Secure the elbow and hose with a nylon tie
strap or the equivalent to keep the hose from coming out
of the drain pipe during use.
15
Leveling the washer Electrical connection
Importance of leveling the washer
Your new washer uses high spin speeds to remove water A WARNING
at the end of the wash cycle. It is important that your ELECTRICAL SHOCK HAZARD
washer is level and that all four washer feet press with
equal pressure against the floor. This will help assure the Improper connection of the equipment-grounding
quietest, most vibration-free use of your washer. conductor may result in electric shock. Have the
Follow these steps: appliance checked by a qualified technician or
licensed electrician if you are in doubt as to whether
1. Install the washer on a level and solid surface, the washer has been properly grounded.
preferably in a corner of a room.
2. If the floor is uneven (or unlevel) adjust the washer feet
as required to level the washer. Do not place anything A WARNING
under the washer feet to help level the washer.
3. Extend the washer feet no more than is necessary.The ELECTRICAL SHOCK HAZARD
more the feet are extended, the more vibration the To reduce the risk of fire or electrical shock, DO
washer will experience. Start with the washer feet NOT use an extension cord or an adapter to
turned all the way in and adjust each foot as connect the washing machine to the power supply.
necessary.
4. Use a bubble level to check the top of the washer to
make sure it is level side to side and front to rear. a WARNING
5. Press down on each corner of the washer top to make ELECTRICAL SHOCK HAZARD
sure the washer doesn't "wobble".There should be no To reduce the risk of electrical shock:
"give" or movement. All four washer feet should press
equally against the floor. This is just as important as • Only pull out the power cord by the plug end and
the washer being level to prevent vibration. never by the cable, as this could damage it.
6. When the washer is level and does not wobble, lock Never touch or hold the plug end or power cord
the washer feet in place by tightening the locknuts with wet hands.
against the washer bottom. Be sure to do this without • Never unplug the plug end or power cord during
changing the height of the foot (hold the foot while operation.
tightening the locknut).
Procedure for adjusting the washer feet: Grounding Instructions
4 a WARNING
ELECTRICAL SHOCK HAZARD
ilk 476 This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
%MS resistance for the electric current. This appliance is
equipped with a cord that has an equipment
grounding conductor and a grounding plug. The
1. After determining which washer feet need to be plug must be plugged into an appropriate outlet that
extended, have someone lift up on the washer slightly is withpallpeoc installed and grounded ance inaccordance
to take pressure off the foot to be adjusted.
local codes and ordinances.
2. Turn the grey plastic foot to extend it downward as far . Do not modify the plug provided with the appliance. If
as necessary to raise the corner of the washer the the plug will not fit into the outlet have a properly
correct amount to level the washer. grounded outlet installed by a qualified electrician. Do
3. When the height of the foot is correct, use a 17 mm not cut, remove or bypass the grounding prong on the
open end wrench to tighten the locknut against the washer power cord plug.
washer bottom.The locknut should be tight against the , The washer power cord plug must be easily
bottom of the washer to lock the foot in place. accessible when the washer is operating.
• When unplugging or plugging in the washer power
cord, grasp the plug end. Do not pull on the cable to
unplug the washer.
• The household electrical supply must be suitable for
the voltage specification shown on the washer rating
16
plate (located inside the washer door, immediately Transporting the washer
below the drum opening). Before transporting the washer
-p Purchase information; Page 4
See the table below for connection specfications and 1. Disconnect the washer power cord from the wall
fuse/breaker requirements. outlet.
2. Turn off the water supply to the washer.
Volts Hertz Ampers Watts 3. Disconnect water supply lines from the tap.
240 60 12 2.880 max. 4. Disconnect the drain hose from the drain location.
5. Install the transport bolt assemblies as shown in the
• The wiring for the electrical outlet circuit must be following images.
sufficient to meet the appliance requirements. Use of a
Ground Fault Circuit Interrupter (GFCI) is
recommended. Remove the transport bolt hole covers
® Protect the power cord from physical damage, such as
being twisted, kinked, pinched, caught in a door, or
walked upon. O 4x slli
• If the power cord is damaged, it must be replaced by a 'e 0
qualified technician to avoid a fire/shock hazard.
Replacement power cords can be purchased through V
Customer Service. 0 0 iir, •i
•i
Customer service; Page 4
• The washing machine must only be connected to an i.
individual branch circuit via a socket which has been
properly installed and grounded. 1. Remove all four transport bolt hole covers.
• Make sure that: 2. Pull the tip of the arrow on the cover out slightly to
-the power plug fits into the socket disengage the locking tab.
-the wire size is sufficient 3. Rotate the cover counterclockwise to remove. Repeat
-the grounding system is properly installed for all 4 transport bolt hole covers.
® The power cord may be replaced by an electrican Insert the transport bolt assemblies
only. Replacement power cords can be purchased
from Customer Service. To reduce the risk of fire or
electrical shock, DO NOT use an extension cord or an ry
adapter to connect the washing machine to the power 4x
supply. If a ground fault circuit breaker is to be used, ��; '�
only use the types marked with the following symbol: ® 0 !' 5 `�`
F 1. Only this symbol can guarantee compliance with �'-,,I1111*.;-
) �`
all current regulations. Q 0 ( , '
J
1�
(11
1. Each assembly consists of a plastic bushing and a
bolt that extends through the bushings. Unscrew the
bolt until the threaded end is flush with the end of the
plastic bushing.
2. Insert the transportation bolt and bushing assembly as
shown. The metal housing slides around the bolt
through the slot in the plastic bushing as the bushing
is slid into place. The open part of the bushing slot
should be facing the direction shown to allow the
assembly to slide fully into place.
3. When the bolt is in place screw it in until the bolt
threads engage the drum. Double check and ensure
bolts are screwed into threaded holes and not into
cracks or crevices. Repeat the process for all 4
transportation bolt assemblies before tightening any all
the way. Complete tightening all 4 bolt assemblies
until they are each snug in place.
17