The URL can be used to link to this page

Home My WebLink AboutDRB18-0577_approved documents_1548280711.pdfACTION FORM Design Review Board (DRB) Department of Community Development 75 South Frontage Road West Vail, CO 81657 Tel: 970-479-2139 www.vailgov.com Project Name: Torras Residence 2018 Application Number: DRB18-0577 Application Type: New Construction Date Applied: 11/26/2018 Project Description: New single family residence at 1170 Westhaven Lane. CONTACTS Contact Type: Applicant Full Name: kh webb Webb Architects (Samantha Gerstein) Address: 710 West Lionshead Circle A Vail, AL 81657 Phone: 9704772990 Contact Type: Property Owner Full Name: TORRAS, IGNACIO Address: Phone: None Project Address: 1170 WESTHAVEN LN (210312109005) (210312109005) Job Site Location: Legal Description: Subdivision: GLEN LYON SUBDIVISION Lot: 39 Block:No Data Parcel Number: 210312109005 BOARDS/STAFF ACTION Motion By: Cahill Action: Approved Second By: Cope Vote: 5-0-0 Date: 12/19/2018 Conditions: - Approval of this project shall lapse and become void one (1) year following the date of final approval, unless a building permit is issued and construction is commenced and is diligently pursued toward completion. - Design Review Board approval shall not become valid for 20 days following the date of approval, pursuant to the Vail Town Code, Chapter 12-3-3 Appeals. - No changes to these plans maybe made without the written consent of Town of Vail staff and/or the appropriate review committee(s). - Prior to requesting any final inspection or a Certificate of Occupancy, the applicant shall have completed the requirements related to the transfer of the EHU obligation off-site. - The applicant shall demonstrate on the building permit submittal the limits of disturbance and related erosion control for review and approval by the TOV. Planner: Jonathan Spence Page 1 of 1 KL&A, Inc. 215 N. 12th Street, Unit E Carbondale, Colorado 81623 Telephone: (970) 927-5174 January 11, 2019 Mr. Forrest Watson Beck Building Company Post Office Box 4030 Vail, Colorado 81658 Re: Glen Lyon Subdivision Skier Tunnel/Bridge Dear Mr. Watson, KL&A has reviewed the existing drawings for the Glen Lyon Subdivision Lot 39 Driveway and Skier Tunnel that was provided by your office, Beck Building Company. The existing drawings set was prepared by Alpine Engineering (Civil Engineer), Design Workshop (Landscape Architect) and Monroe & Newell Engineers (Structural Engineer). The drawings prepared by Alpine Engineering dated 08/07/97 indicate the bridge to be an AMCOR precast bridge and refer to the drawings prepared by Monroe & Newell for the bridge foundations and structural design. The drawings prepared by Monroe & Newell Engineers dated 8/13/97 state that “All Construction to be in conformance with Colorado Department of Highways Standard Specifications for road and bridge construction, latest edition” and the current AASHTO for the HS20 live load. At the time of the drawings the current edition was the 1996 AASHTO and the HS20 design truck was included in that edition. The AASHTO HS20 design truck loading is attached for reference. Based on this information, it is our professional opinion that the bridge was designed for a HS20 truck loading plus the additional dead, live and snow loads indicated in the drawings. In addition, your office requested KL&A to determine if the bridge is sufficient to support a 20ton drill rig with a tire gauge of 10ft-12ft between the front and back tires. KL&A compared the resulting moments and shears and compared those to the HS20 design truck load. The maximum moment and shear from the 20ton truck is less than the maximum moment and shear that would be created by the HS20 design truck loading. Based on this information and the above- mentioned drawings, it is our professional opinion that the bridge, assuming that it was built as designed and to the AASHTO standards at the time, is sufficient to support the proposed drill rig. Sincerely, Rebecca Faverty, PE Brett McElvain, PE Project Manager Engineer of Record Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS1 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Fixture Type: Catalog Number: Project: Location: WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. waclighting.com Phone (800) 526.2588 Fax (800) 526.2585 Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050 Central Distribution Center 1600 Distribution Ct Lithia Springs, GA 30122 Western Distribution Center 1750 Archibald Avenue Ontario, CA 91760 QUAD LED PATH LIGHT 6091 ORDERING NUMBER Color Temp Finish 6091 Quad 27 30 2700K Warm White 3000K Pure White BZ Bronze on Aluminum PRODUCT DESCRIPTION Sleek linear design blends seamlessly into pathways while providing soft, even illumination FEATURES IP66 rated, Protected against powerful water jets Factory sealed water tight ® xtures Solid diecast corrosion resistant aluminum alloy Recommended spacing for installation: Residential 8 to 10ft; Commercial: 5 to 7ft Mounting stake, 6 foot lead wire, and direct burial gel ® lled wire nuts are included Maintains constant lumen output against voltage drop UL & cUL 1838 Listed SPECIFICATIONS Input: Power: Brightness: CRI: Rated Life: 9-15VAC (Transformer is required) 3.0W / 4.5VA Up to 100 lm 90 60,000 hours 6091-____BZ Example: 6091¯30BZ 23" 3½ " 3½ " 1fc 3 3 Avg 3.6fc 0.2fc 5 0.1fc 6 from the source Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS1 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. waclighting.com Phone (800) 526.2588 Fax (800) 526.2585 Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050 Central Distribution Center 1600 Distribution Ct Lithia Springs, GA 30122 Western Distribution Center 1750 Archibald Avenue Ontario, CA 91760 Additional Mounting Stake Guardian Mount 9000-ST9-BK Durable PVC stake 9000-SP9-BZ Stainless Steel Surface Mount Flange/Stake 5000-SCP-BZ Bronze on Aluminum Includes three 7 inch threaded stainless steel stabilizing pins for ground mounting or surface mounts with four screws or over a junction box Heavy duty stainless steel spike to position ® xture. Formed from a single piece of metal Magnetic Transformers 9075-TRN-SS 75W Max 9150-TRN-SS 150W Max Stainless Steel, 12-15V output, IP65 rated, UL 1838 listed See transformer spec sheet for details and its accessories 9300-TRN-SS 300W Max 9600-TRN-SS 600W Max QUAD LED PATH LIGHT 6091 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS2 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 18inter-lux.com/linealight Cut A path-marker recessed spotlight with tilted emission and an ultra- thin round or square shape for a minimalistic delicate appearance. Passive heat dissipation Aluminum casing Light distribution Very narrow tilted emission for a functional yet minimalistic effect Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS2 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 19 Linea Light Cut_R | Path-marker | powerLED 2W 630 mA Ø2 1.7 Ø2.6 2 type CRI 80 E92513 CRI 80 E92514 color 3000 K 233 lm W 4000 K 249 lm N optic 5° 05 Cut_Q | Path-marker | powerLED 2W 630 mA Ø2 1.7 2.8 2 type CRI 80 E92558 CRI 80 E92559 color 3000 K 233 lm W 4000 K 249 lm N optic 5° 05 Cut power supply options (remote only) ECO30W-630 SOLO50W-630 SOLO100W-630 E84338 0-10V EldoLED ECOdrive 30W, for 1-10 fixtures 0-10V EldoLED SOLOdrive 50W, for 1-16 fixtures 0-10VEldoLED SOLOdrive 100W, for 1-32 fixtures Concrete outer casing (required, order separately) power supply options (remote only) ECO30W-630 SOLO50W-630 SOLO100W-630 E84338 0-10V EldoLED ECOdrive 30W, for 1-10 fixtures 0-10V EldoLED SOLOdrive 50W, for 1-16 fixtures 0-10VEldoLED SOLOdrive 100W, for 1-32 fixtures Concrete outer casing (required, order separately) Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS3 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Type: BEGA Product: Project: Voltage: Color: Options: Modified: Single 180° light sector Lamp T A B C D 88 673* 3.0 W LED 25° 4 3⁄4 31 ⁄2 3 3 ⁄4 1 1 ⁄8 * Remote electronic driver required BEGA 1000 BEGA Way, Carpinteria, CA 93013 (805) 684-0533 FAX (805) 566-9474 www.bega-us.com ©copyright BEGA 2018 Updated 03/2018 Drive-over in-grade luminaires to illuminate ground surfaces Housing: Constructed of .125" thick machined stainless steel welded to a stainless steel bottom mounting plate. Trim/Clamping ring is heavy, machined bronze. Enclosure: Top enclosure is constructed of copper free die-cast aluminum alloy secured by two (2) captive socket head stainless steel screws. Clear, borosilicate focusing lens with molded one piece, high temperature silicone rubber gasket. Symmetrical reflector and internal lamp shield are included. Electrical: 3 W LED luminaire on a 24 V DC circuit, 5 total system watts. Remote electronic 24 V DC driver required. Standard LED color temperature is 3000K with a >80 CRI. Available in 4000K (>80 CRI); add suffix K4 to order. Inner housing pre-wired with ten (10) feet of 12 AWG wire and waterproof cable gland entry into housing. A separate weatherproof single gang wiring box for power supply must be proved (by contractor). Note: Due to the dynamic nature of LED technology, LED luminaire data in this catalog is subject to change at the discretion of BEGA-US. For the most current technical data, please refer to www.bega-us.com. Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in standard BEGA Black (BLK). Custom colors not available. UL listed for US and Canadian Standards, suitable for wet locations and vehicle drive over. Protection class: IP67. Note: A foundation and proper drainage must be supplied by the contractor. These luminaires are designed to bear pressure loads up to 2,200 lbs. from vehicles with pneumatic tires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. Weight: 3.0 lbs. Luminaire Lumens: 67 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS5 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. BLINKER WALL RECESSED Project : Type: SPECIFICATION SHEET Page: 1 of 5 Due to continuous improvements, the information herein may be changed without notice 9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com PP - R0 Last update: August 23, 2018 Luminaire characteristics: Power input: 5 to 34.5W Lumens: 30 to 825lm (for 3000K, 90CRI) Luminaire efficacy: 6 to 26lm/W Source: LED module (LM-80 tested) 3000K : 90CRI, 4000K : 90CRI. Lumen maintenance: >70% of initial lumens at 50 000 hours (L70) (LM80 tested). Optics: Accent light. Material: Body: Die-cast aluminum Reflector: 99.98% pure anodized aluminum Diffuser: 4mm thick acid etched tempered glass Hardware: Stainless steel screws and silicone gaskets. Mounting: Recessed wall installation using back box accessory. Electrical: Integral high efficiency electronic power supply, rated at 50 000 hours, 120-277V. Finish: Aluminum gray or Burnished bronze. Weight: 1.5 to 6.8lbs (0.7 to 3.1kg) Warranty: 5 year limited warranty. Ratings: IP65, IK06 Certification: cULus listed for Wet location Collection of wall recessed luminaires for exterior applications. Designed for low mounting heights with downward asymmetric light distribution. Low luminance with the light source regressed inside the luminaire and shielded from all viewing angles. Exceptional European build quality with high corrosion resistant finish. Robust marine grade die-cast aluminum construction with stainless steel fasteners and factory sealed micro-prismatic glass diffuser. Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS5 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. BLINKER WALL RECESSED Project : Type: SPECIFICATION SHEET Page: 2 of 5 Due to continuous improvements, the information herein may be changed without notice 9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com PP - R0 Last update: August 23, 2018 DIMENSIONS Micro Blinker S.6060 Installation in concrete using back box: S.6063 Mini Blinker S.6070 Installation in concrete using back box: S.6073 Blinker S.6080 Installation in concrete using back box: S.6083 Mega Blinker S.6020 Installation in concrete using back box: S.6023 FRONT VIEW SECTION VIEW FRONT VIEW SECTION VIEW FRONT VIEW SECTION VIEW FRONT VIEW SECTION VIEW 1¾" (45mm) 5⅛" (130mm) 5⅛" (130mm) 4⅛" (105 mm) 4" (100 mm) 7⅛" (180mm) 6¼" (157mm) 6⅝" (170mm) 9" (230mm) 9" (230mm) 9" (230mm) 11¾" (300mm) 12¾" (323mm) 17" (433mm) 11¾" (300mm) 11¾" (300mm) Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS5 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. BLINKER WALL RECESSED Project : Type: SPECIFICATION SHEET Page: 3 of 5 Due to continuous improvements, the information herein may be changed without notice 9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com PP - R0 Last update: August 23, 2018 90° 50° 40° 60° 10°20° 0 20 40 60 80 100 120 -0° H CD 70° 80° 30° Micro Blinker Blinker Mini Blinker PHOTOMETRIC DATA Visit sistemalux.com for complete photometric data. 5 fc 2 fc 0,5 fc Mounting Height: 4ftGrid scale 1 : 4ft0,25 fc 1 fc 3000K - 90 CRI - Accent 3 3 42 1 0 1 2 3 4 2 1 0 1 2 3 4 90° 50° 40° 60° 10°20° 0 73 147 220 293 367 440 -0° H CD 70° 80° 30° 5 fc 2 fc 0,5 fc Mounting Height: 4ft Grid scale 1 : 4ft0,25 fc 1 fc 3000K - 90 CRI - Accent 3 3 42 1 0 1 2 3 4 2 1 0 1 2 3 4 90° 50° 40° 60° 10°20° 0 107 213 320 427 533 640 -0° H CD 70° 80° 30° 5 fc 2 fc 0,5 fc Mounting Height: 4ftGrid scale 1 : 4ft0,25 fc 1 fc 3000K - 90 CRI - Accent 3 3 42 1 0 1 2 3 4 2 1 0 1 2 3 4 5W Accent light90 LOAD (W) CCT (K) CRI OPTIC LUMENS (lm) EFFICACY (lm / w) MODELSMAX CANDELA (cd) 3000K 30 6 110 S.6060W 17W Accent light90 4000K 310 18 480 S.6070N 3000K 280 16 435 S.6070W 23W Accent light90 4000K 595 26 660 S.6080N 3000K 565 25 630 S.6080W Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS5 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. BLINKER WALL RECESSED Project : Type: SPECIFICATION SHEET Page: 5 of 5 Due to continuous improvements, the information herein may be changed without notice 9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com PP - R0 Last update: August 23, 2018 ORDERING INFO S.6063 - Back box for Micro Blinker (S.6060) 2¾" x 11¾" x 4⅛" (70mm x 300mm x 105mm) MOUNTING (TO BE ORDERED SEPARATELY) S.6073 - Back box for Mini Blinker (S.6070) 4¼" x 11¾" x 5⅛" (110mm x 300mm x 130mm) S.6083 - Back box for Blinker (S.6080) 7½" x 11¾" x 5⅛" (190mm x 300mm x 130mm) S.6023 - Back box for Mega Blinker (S.6020) 7¼" x 17" x 6⅝" (187mm x 433mm x 170mm) ELECTRICAL 120 - 120V UNV* - 120-277V FINISH 14 - Aluminum gray MODELS S.6070W - 3000KS.6060W - 3000K Mini BlinkerMicro Blinker S.6070N - 4000K S.6080W - 3000K Blinker S.6080N - 4000K S.6020W - 3000K Mega Blinker S.6020N - 4000KS.6060N - 4000K 20 - Burnished bronze FIXTURE - - *UNV only available for Mini Blinker. RESET INFO Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS6 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Fixture Type: Catalog Number: Project: Location: WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Aug 2018 modernforms.com Phone (800) 526.2588 Fax (800) 526.2585 Headquarters/Eastern Distribution Center 44 Harbor Park Drive Port Washington, NY 11050 Central Distribution Center 1600 Distribution Ct Lithia Springs, GA 30122 Western Distribution Center 1750 Archibald Avenue Ontario, CA 91760 FEATURES • ETL & cETL wet location listed, IP65 rated • Dark Sky Friendly • Mouth blown hammered clear glass • Full range dimming when used with compatible dimmers* • No transformer or driver required • 277V option available for WS-W28521 (special order) • 80,000 hour rated life • Color Temp: 3000K • CRI: 90 PRODUCT DESCRIPTION Heavy hardware exhibits craftsman details. Mouth blown hammered clear glass creates resplendent sparkles on the wall. SPECIFICATIONS Construction: Mouth blown hammered clear glass Light Source: High output LED. Finish: Graphite (GH), Oil-Rubbed Bronze (ORB) Standards: ETL & cETL wet location listed IP 65. BALTHUS – model: WS-W285 LED Exterior Sconce ORDER NUMBER Model Height Wattage Voltage LED Lumens Delivered Lumens Finish WS-W28514 WS-W28516 WS-W28521** 14" 16" 21" 10W 10W 10W 120V 478 481 475 455 465 470 GH ORB graphite Oil Rubbed Bronze Example: WS-W28514-ORB **For 277V special order, add an “F” before the finish: WS-W28521F-ORB 7" 82" 16" WS-W28516 6" 7a" 14" WS-W28514 9" 10w" 21" WS-W28521 REPLACEMENT GLASS Part# Fixture RPL-GLA-28521 RPL-GLA-28516 RPL-GLA-28514 WS-W28521 WS-W28516 WS-W28514 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS7 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. WE0500S* Anti-glare screen, half transparent and half serigraphed black Optics 10°, 20°, 40° *Order together with the lighting fixture BRIGHT 1.2 © Copyright 2017 Designplan Lighting Inc. Tel: 908-996-7710 Fax: 908-996-7042 sales@designplan.com www.designplan.com 79 Trenton Ave Frenchtown, NJ 08825 Rated IP68 Last Modified: ø1.38" 2.05" IP68 0.44 lbs max 2W - max 500mA CB1212 A I LED Color Optics 0 - 5000K 1 - Blue 2 - Green 3 - Red 5 - 3000K 9 - 4000K F - 2700K D - Diffuse L - 40° M - 20° S - 10° W - 10°x45° IK10 Ø 1.10" Ø 3.15" H 3.94" WH0101* Honeycomb louvre Accessories Installation Mounting Material recessed uplight for outdoor applications (not suitable for immersion in swimming pools and fountains) recessed on a board (thickness: min 0", max 0.49") body and trim in AISI 316L stainless steel screen in tempered glass 1 power LED max 2W max 500mA not included series 88 lm (3000K, 500mA) No. and type of LED Nom. power consumption Power supply Power supply unit Connection Total delivered lumens Optics Bright 1.2: 10°, 20°, 40°, 10°x45°, diffuse white: 2700K, 3000K, 4000K, 5000K; blue; red; green IP68 LED color Ingress protection Impact resistance IK10 CB12120LAI - Bright 1.2, 5000K, 40° Optics WE0500A* Semi-diffusing screen, half transparent and half frosted Optics 10°, 20°, 40° *Order together with the lighting fixture 08.08.2017 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS7 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. POWER SUPPLIES © Copyright 2017 Designplan Lighting Inc. Tel: 908-996-7710 Fax: 908-996-7042 sales@designplan.com www.designplan.com 79 Trenton Ave Frenchtown, NJ 08825 Last Modified: PPLT00466 500mA 1-5 Fixtures120-277vAC to (150-1400mA) 10W Class 2 Job Name: Fixture Type: PPLT00465 1-10 Fixtures120-277vAC to (150-1400mA) 20W Class 2 PPLT00207 2-13 Fixtures120vAC to 500mA 26W Class 2 PPLT00480 1-15 Fixtures120-277vAC to (150-1400mA) 30W Class 2 0-10v dimming (to 1%) 0-10v dimming (to 1%) 0-10v dimming (to 1%) trailing-edge dimmable to 10% (120v only) PPLT00206 1-3 Fixture120-277vAC to 500mA 6W Class 2 08.08.2017 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS8 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 01234267839±²³±´µ4±8´2¶¶2²4·±83 ¸±62138´2¹¶±86¹¹1 ¹1¹º46¹¹1»28º2·¸±4µ4µ±·±88¹»34±»2¼½¾2¶¶2²4· ¿1¹À2²4¹1Á03¿3Â³2¹¶4µ1¹¸·º¿4¹ÃÃÄ¶4ÅÆÇ9È ¸±4µ¶¹º1 3»3±³3Â³2³28·¹¿4±¹8·É4µ2Ê¹·²¹ËÄ½¶¶2²4·¼½¾Ì1¹À2²4¹1 ±·28´±822126 4¹²12342·4º88±8´±³³º9±834±¹82¶¶2²4·Á Í·±8´3 93Î±9º9ÏÐ¸344·¹¶¿¹¸21É4µ2Ê¹·²¹ËÄ½¶¶2²4· ¼½¾Ì1¹À2²4¹1¿3²Ñ·38393Ò±8´39¹º84¹¶¹º4¿º4±84¹3 ²¹9¿3²4¿3²Ñ3´2Ó93Ñ±8´±44µ2±623³67839±²³±´µ4±8´ ¶±Î4º12¶¹19º·2º9·É3Ôº31±º9·386 µ¹·¿±43³±47»28º2·Á Õ»3±³3Â³2±8ÐÐÇÇÖ0¹¹³×µ±42¹1ÊØÙ×¼½¾9¹62³·É 4µ2ËÄ½¶¶2²4·¼½¾´2821342·»±»±6 ¸3421É¶±12386 ¹4µ21 Ã¾2¶¶2²4·Â7¿1¹À2²4±8´³±´µ44µ1¹º´µ±4·º8±Ôº2¹¿4±²3³ ¿34µ¹¶¹¶¶Ä·24É¹»21³3¿¿±8´´¹Â¹·Á ÚÛÜÝÛÞßàáÛâ ãäåæçèéêëëêìíîïðññååòóôôõæðîïöôë÷øùæçèéôúïîôûü ãýôþëõöûüôúïîÿüúëôĀîāöêíîāöëêûĂöôăĄöêąêûĂõöüĆćĈĉĊċåĉĊ ñåĉêûā Čåĉ ãčÿÿöúïüĂôĄôüāöüîĂûöā ăôëïðöĎďèăăöÿïüçèéúëôĐöÿïôëïôÿëöêïö »±»±6É67839±²Ã¾³±´µ4±8´2¶¶2²4· ãđêüüîĀöÿôôõîûĂăôëÿôąúõöïöõìüîõöûïôúöëêïîôû ãčÿÿöúïüþûîĀöëüêõõîûöĀôõïêĂöĒćååďēĔåĕčóĖ öûêĄõîûĂôúöëêïîôû 387¸µ21231¹º86 4µ2´³¹Â2 ãėûďĄôêëā āîąąîûĂêûā üúööā ÿôûïëôõü ãéĘĎñćēÿôąúêïîĄîõîïìúëôĀîāöüăõîÿęöëďăëööāîąąîûĂïðëôþĂðôþï ïðöëêûĂöĆćååĚěåĚ ã÷éĘÿêúêĄõö ãĜđäñëêïöā ăôëôþïāôôëþüö ãóôõôëėúïîôûüĆùõêÿęĊæðîïöêûā ĝîõĀöë ĞğĠġġĢģĤĥĦ ħĠĨĩĪīĬĢģĤīĪ Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS8 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 01234543674890 ±²³´µ·¸¹µº»¼½ ¾¿¿ÀÁÂ¿·ÃÄ Å¸Æ¼ÇÄ¸²È´É³µÊ¸²½ ËÌÍºµµÈºµÉºÎÊÉ´É¸´µ³´µ Ï´µ³´µ½ ÌÌ¿¿Ð½ÑÒÌ¿¿¹´É¼²È ÓÔÕÍ½¾ÒÌ¿¿¹´É¼²È Ö×ØÃÇÇºÙ½ ÌÌ¿¿Ð¸ÇÓÔÕÍÚÍÛÊµ¼Ö×ØÜÌÌ¿¿Ðĭ Ö´É¼²ÝºÊ²µ¼²º²Þ¼½ Ì¿Ò¿¿¿Û¸´ÇÈºµÂÌÄÚÖÝÀßàÀ¿áĭ Å¸Æ¼ÇÄ¸²²¼ÞµÊ¸²½ ËÀâµÚÁÉĭ Ê²È´¹ºµ¼ã ÆÊµÛâ¼Éº¹¼ĮäÖÞ¸²²¼Þµ¸ÇÚ´È¼Ç¼²ã ´²µ¼ÇÉÊ²ºµ¼ãĭ Øºµº½ ØÝåÌ¾Á±²æÏ´µçÊºĮäÖÄ¸²²¼Þµ¸Ç¸²¹´ÉÊ²ºÊÇ¼ éêëììíîïðñëòóóôôõöó÷øùïúøû÷üýùùíûð åÀ×ââ¼ÞµÈÖ×ØÓÔÕÍþáÄ¸²µÇ¸¹ÄÛº²²¼¹È ÓØÝÞ¸É³ºµÊÿ¹¼ ĀāĂăăĄąĆćĈ ĊĂċČčĎďĄąĆĎč Ï³¼ÇºµÊ²»ä¼É³Đ½ À¾Ñđµ¸¾¾ÑđĒÚÀÁ¿đµ¸ÂÌđÄĭ ×²çÊÇ¸²É¼²µ½ ±ÅËÌÇºµ¼ã ē¸´ÈÊ²»½ Å¸Æã¼ÇÄ¸ºµ¼ã Ã¹´ÉÊ²´É Ã³³Ç¸çº¹È½ ×äÖæĮÖĔµº²ãºÇãÈĕ¾ÌßÑº²ã ĕáßÌ¿ Þ×äÖæÄĔÃÄÁÁĐÁĕ¾ËË ÷ë ØÊÉ¼²ÈÊ¸²È½ ¾¿ĐÁÌĖÍÎßĐÂĖÖÎàĖē ÚÁËÞÉÎ¾áĐËÞÉÎÁÁĐàÞÉĭ Í¼Ê»Ûµ½ à¹ÿÈÚÂĐ¾ė»ĭ ĀāĂăăĄąĆć ĊĂċČčĎďĄąĆĎč 4ĘęĚ3Ĝĝę ĞęğĠġĢģĘĢĜĤ Áàß¿¿¿¿ÌÌ¿¿¾ Áàß¿¿¿¿ÌÌ¿¿Á Áàß¿¿¿¿ÌÌ¿¿Ñ Áàß¿¿¿¿ÓÔÕÍ¾ éêëììíîïð ñëòĥúøĦíîïøúįóóôôõįħûýîĨ éêëììíîïð ñëòĥúøĦíîïøúįóóôôõįĩüĪïí åÀ×ââ¼ÞµÈ Ö×ØÅÇ¸ī¼Þµ¸ÇÒÌÌ¿¿ÐÒĔÊ¹ç¼Ç éêëììíîïð ñëòĥúøĦíîïøúįĬİħĩįħûýîĨ Áàß¿¿¿¿ÓÔÕÍÁ Áàß¿¿¿¿ÓÔÕÍÑ éêëììíîïðñëòĥúøĦíîïøúįĬİħĩįĩüĪïí åÀ×ââ¼ÞµÈÖ×ØÅÇ¸ī¼Þµ¸ÇÒÓÔÕÍÒĔÊ¹ç¼Ç Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS8 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 0123345678 ±2²³´µ¶456µ´ 012334567 ±2²·55477µ´¸47 ¹º»¼¾¿À» Á»ÂÃÄÅÆºÅ¿Ç ÈÉÊËËËËËËËÌÉ ÈÉÊËËËËËËËÎË ÈÉÊËËËËËËËÏË ÈÉÊËËËËËËËÊË ÈÉÊËËËËËËÐÌÉ ÈÉÊËËËËËËÐÎË ÈÉÊËËËËËËÐÏË ÈÉÊËËËËËËÐÊË ÈÉÑËËËËÌËËÌÈ ÈÉÑËËËËËÏËËÌ ÈÉÑËËËËËÏËËÈ ÈÉÑËËËËËÏËËÎ ÈÉÑËËËËËÏËËÓ ÈÉÑËËËËËÏËËÏ ÈÉÊËËËËËËËÔÏ ÈÉÊËËËËËËËÉË ÈÉÊËËËËËËËÉÏ ÌÈËÕÖÖÖÖÐ×Ø× ÈÏËÙÙÙÙÙÐ×Ø× ÈÏÏÙÙÙÙÙÐ×Ø× ÈÏÏÙÙÙÙÙÐ×Ø× ÈÏËÊÈÌËÚÐ×Ø× ÈÑËÛÜÐĭÝÐ×Ø× ÈÑËÛÜÐÌÛÐ×Ø× ÈÑËÛÜÐÈÛÐ×Ø× ÈÑËÛÜÐÞÛÐ×Ø× ×ßàááâãĮä åàæÕçèéâãĮèçÌÉêåâëä ßĭìíãî ×ßàááâãĮä åàæÕçèéâãĮèçÎËêåâëä ßĭìíãî ×ßàááâãĮä åàæÕçèéâãĮèçÏËêåâëä ßĭìíãî ×ßàááâãĮä åàæÕçèéâãĮèçÊËêåâëä ß ĭìíãî ×ßàááâãĮä åàæÕçèéâãĮèçÌÉêåâëä ßÐïìðâç ×ßàááâãĮä åàæÕçèéâãĮèçÎËêåâëä ßÐïìðâç ×ßàááâãĮä åàæÕçèéâãĮèçÏËêåâëä ßÐïìðâç ×ßàááâãĮä åàæÕçèéâãĮèçÊËêåâëä ß Ðïìðâç ÐíáâĮñÛíòìâóÎô õÌö÷ øèäãèÕèìâÞèùëĮúããâääèçñßĭìíãî øèäãèÕèìâÞèùëĮúããâääèçñßÝûïĮâ ÐĮíïëìâää ÐĮââìÐĮçíüýïĮ áèçøèäãèÕèìâÞèùëĮ øèäãèÝíììÞèùëĮúããâääèçñßĭìíãî øèäãèÝíììÞèùëĮúããâääèçñßÝûïĮâ þÿĀÿāĂĄāąÿĆćĈĀćÿĉĊċČĆćč ×ßàááâãĮä åàæúöòâçØïçâàááâãĮØÚìĮâç ×ßàááâãĮä åàæĎçââëúùçèçí àááâãĮØïìĮâç ×ßàááâãĮä åàæÛñíëÝíĮâçàááâãĮØïìĮâç ×ßàááâãĮä åàæÕâçöíãèìèçæïãûçèïãĎìíää ØïìĮâç ÖÖÖÖďáèùçĐïđïĮãèìèçëùöòâç þÿĀÿāĂĒēČēĈĀćÿĉĊċČĆćč ×ßàááâãĮä åàæÐĮíĮïãÐĮíëĐíçĐ ÐĮââìĎèòè ÙÙÙÙÙďáïðâĐïđïĮ äĮíëĐíçĐ đèòèëùöòâç ×ßàááâãĮä åàæÐĮíĮïãÚöíđâĎìíääĎèòè ÙÙÙÙÙÙďáïðâĐïđïĮđèòèëùöòâç ×ßàááâãĮä åàæÐĮíĮïãÛèìèçÝíðâĎèòè ÙÙÙÙÙÙďáïðâĐïđïĮđèòèëùöòâç ×ßàááâãĮä åàæÐĮíĮïãÛùäĮèöÐĮââìĎèòè ×ßàááâãĮä åàæÐĮíĮïãÛùäĮèöĭĔÝĎìíää Ďèòè ×ßàááâãĮä åàæÐĮíĮïãÛùäĮèöĕëâßÛèìèçĎìíääĎèòè ×ßàááâãĮä åàæÐĮíĮïãÛùäĮèöĖėèßÛèìèçĎìíää Ďèòè ×ßàááâãĮä åàæÐĮíĮïãÛùäĮèöÞùìĮïßÛèìèçĎìíää Ďèòè ĘęēĚÿāĚĊĆěĜ Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS8 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 0123345678 ±2²³´µ¶456µ´ 012334567 ±2²·55477µ´¸47 ¹5µº6¸º»4¼½ ¾¿ÀÁÃÄÅÀ ÆÀÇÈÉÊË¿ÊÄÌ ÍÎÏÐÐÐÐÐÐÐÏÑ ÍÑÑÒÒÒÒÒÓÔÕÔ ÍÑÑÒÒÒÒÒÓÔÕÔ ÍÑÐÏÍÖÐ×ÓÔÕÔ ÍØÐÙÚÛÜĭÓÔÕÔ ÍØÐÙÚÛÖÙÓÔÕÔ ÍØÐÙÚÛÍÙÓÔÕÔ ÍØÐÙÚÛÝÙÓÔÕÔ ßàáâãĮäæçèééêäëìíèßîïðïñâòëóôãðêòì Ôõö÷÷øùúû ýöÓþøÿĀāùøĂøăúÓĄăāĂąùÔõö÷÷øùúûĆĀāûû ćÎØĂĂĈ Ôõö÷÷øùúû ýöÓÓĄăāĂąù×ĂāĉøĆĀāûû ĆĊċĊ ÒÒÒÒÒÒČ÷ąčøĎąĉąú ĉĊċĊăďĂċøĐ đĒēĔĔĕĖėĘ ęēĚĚěĜĝĞğĖĠġĢġģĤĝĥĕĦġįġ ÒÒÒÒÒÒČ÷ąčøĎąĉąú ĉĊċĊăďĂċøĐ Ôõö÷÷øùúû ýöÓÓĄăāĂąùÙďûúĊĂÛúøøĀĆĊċĊ Ôõö÷÷øùúû ýöÓÓĄăāĂąùÙďûúĊĂÜħĭĆĀāûûĆĊċĊ Ôõö÷÷øùúû ýöÓÓĄăāĂąùÙďûúĊĂĨăøõÙĊĀĊĐĆĀāûû ĆĊċĊ Ôõö÷÷øùúû ýöÓÓĄăāĂąùÙďûúĊĂĩĪĊõÙĊĀĊĐĆĀāûû ĆĊċĊ Ôõö÷÷øùúû ýöÓÓĄăāĂąùÙďûúĊĂÝďĀúąõÙĊĀĊĐĆĀāûûĆĊċĊ Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS8 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 0123345678 ±2²³´µ¶456µ´ ·¸¹º¹»¼º½¾¿À ÁÂÃÄÅ ÇÈÉÄÃÊ ËËÌÍÎ ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ ÛÚĭÌ×Û ÝÞß ĭËàÌØÛ ÝÞß áà×ÌÚ× ÝÞß ×âÍÛÛÌÜĭ ÝÞß ÚâáËÜÌËÜ ÝÞß ×ÜâÍØ× ÝÞß ×ÌÍ Ù ×ÌÜ Ù ×ÌË Ù ØÌá Ù ØÌĭ Ù ØÌÚ Ù ËÌÛ Ù ËÌØ Ù ×Ìĭ Ù ×ÌË Ù ØÌà Ù ØÌÛ Ù ãÃÒÑ ÇÈÉÄÃÊ ×ĭÌáÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÁÂÃÄÅ ĮÂÅÔä çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ ùúûüýþ ñìÿíìì øìĀ÷ ÁÂÃÄÅ ÇÈÉÄÃÊ ËËÌ×Î ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ ÜàØÌÚ× ÝÞß àÚÜÌĭÛ ÝÞß ×âÚØÜÌĭá ÝÞß ËâÚË×ÌËË ÝÞß ÜâËËËÌÍÜ ÝÞß ËØâàá× ÝÞß ×ÌÍ Ù ×ÌÛ Ù ×Ì× Ù ØÌà Ù ØÌĭ Ù ØÌÚ Ù ËÌÚ Ù ËÌØ Ù ×Ìĭ Ù ×ÌË Ù ØÌà Ù ØÌÛ Ù ãÃÒÑ ÇÈÉÄÃÊ ×ÜÌàÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÁÂÃÄÅ ĮÂÅÔä çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ āāĂĂă ýþ ñìÿíìì øìĀ÷ ÁÂÃÄÅ ÇÈÉÄÃÊ ÚĭÌáÎ ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ ×áØÌà ÝÞß ËÍÛÌà ÝÞß ÛËáÌÚ ÝÞß ÍĭÚÌË ÝÞß ×âÍ×ÍÌÚ ÝÞß ĭâàĭáÌØ ÝÞß ÚÌØ Ù ËÌÜ Ù ËÌØ Ù ×ÌÜ Ù ×ÌØ Ù ØÌÜ Ù ÛÌØ Ù ÚÌÚ Ù ËÌÍ Ù ËÌØ Ù ×ÌÚ Ù ØÌÍ Ù ãÃÒÑ ÇÈÉÄÃÊ ËÍÌÍÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÁÂÃÄÅ ĮÂÅÔä çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ āāĂĂăĄĂ ñìÿíìì øìĀ÷ ÁÂÃÄÅ ÇÈÉÄÃÊ ÍÛÌËÎ ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ ÚĭÌÜØ ÝÞß ÜËÌÜĭ ÝÞß àËÌ×Ú ÝÞß ×ÛĭÌØ ÝÞß ÚËàÌÜØ ÝÞß ×âÚ×ÛÌØ ÝÞß ÍÌØ Ù ÜÌà Ù ÛÌÍ Ù ÚÌÜ Ù ËÌÚ Ù ×ÌË Ù áÌ× Ù ÍÌÜ Ù ĭÌØ Ù ÛÌÜ Ù ÚÌØ Ù ×ÌÜ Ù ãÃÒÑ ÇÈÉÄÃÊ ĭØÌØÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÁÂÃÄÅ ĮÂÅÔä çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ āāĂĂă āĂ ñìÿíìì øìĀ÷ ÁÂÃÄÅ ÇÈÉÄÃÊ ÍáÌáÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ āāĂĂă ąĂ ñìÿíìì øìĀ÷ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ Û×ÌØ ÝÞß ÜáÌØÛ ÝÞß áËÌËÜ ÝÞß ×ĭÛÌØ ÝÞß ÚĭáÌØ ÝÞß ×âÛÍĭÌØ ÝÞß ÜÌÍ Ù ÛÌà Ù ÚÌà Ù ËÌá Ù ×Ìá Ù ×ÌØ Ù ×ØÌØÙ àÌÛ Ù ĭÌÍ Ù ÜÌØ Ù ÚÌÚ Ù ×ÌÍ Ù ãÃÒÑ ÇÈÉÄÃÊÜ×ÌØÎ ÁÂÃÄÅ ĮÂÅÔä ÁÂÃÄÅ ÇÈÉÄÃÊ ÚĭÌ×Î ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ ×ÚÜÌÛ ÝÞß ×áÛÌá ÝÞß ÚØÛÌĭ ÝÞß ÜÛ×Ìĭ ÝÞß ×âË×àÌÜ ÝÞß ÛâàÍÛÌØ ÝÞß ÚÌ× Ù ËÌÛ Ù ËÌ× Ù ×Ìĭ Ù ×Ì× Ù ØÌÜ Ù ÚÌá Ù ÚÌË Ù ËÌĭ Ù ËÌØ Ù ×ÌÚ Ù ØÌÍ Ù ãÃÒÑ ÇÈÉÄÃÊ ËàÌĭÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÁÂÃÄÅ ĮÂÅÔä çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ ùúûü ĄĂ ñìÿíìì øìĀ÷ ÁÂÃÄÅ ÇÈÉÄÃÊ ÍÛÌËÎ ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ ÚÜÌĭÍ ÝÞß Ü×ÌÚĭ ÝÞß àØÌËÜ ÝÞß ×ÛËÌÍ ÝÞß ÚË×ÌØ ÝÞß ×âËàÛÌØ ÝÞß ÍÌØ Ù ÜÌà Ù ÛÌÍ Ù ÚÌÜ Ù ËÌÚ Ù ×ÌË Ù áÌ× Ù ÍÌĭ Ù ĭÌ× Ù ÛÌĭ Ù ÚÌØ Ù ×ÌÜ Ù ãÃÒÑ ÇÈÉÄÃÊ ĭØÌØÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÁÂÃÄÅ ĮÂÅÔä çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ ùúûü āĂ ñìÿíìì øìĀ÷ ÁÂÃÄÅ ÇÈÉÄÃÊ àØÌÚÎ ãÃÒÑ ĮÂÅÔä åÃÈÔÃæ ãÃÒÑ ÝÞß ÏÄÄÐÑÂÈÒÈÓÃ ÒÔ Ò ÕÂÖÔÒÈÓÃ çèéêéëìêíîï ñòêò óéí ôõöóóìïê÷ øöñ ùúûüąĂ ñìÿíìì øìĀ÷ ×ÌØÙ ËÌØÙ ÚÌØÙ ÛÌØÙ ÜÌØÙ ĭÌØÙ ÚÍÌà ÝÞß ÜÛÌÜ ÝÞß àÜÌ× ÝÞß ×Ü×ÌÚ ÝÞß ÚÛØÌÜ ÝÞß ×âÚĭËÌØ ÝÞß ĭÌØ Ù ÜÌØ Ù ÛÌØ Ù ÚÌØ Ù ËÌØ Ù ×ÌØ Ù ×ØÌ× Ù àÌÛ Ù ĭÌà Ù ÜÌ× Ù ÚÌÛ Ù ×ÌÍ Ù ãÃÒÑ ÇÈÉÄÃÊÜÚÌÜÎ ÁÂÃÄÅ ĮÂÅÔä ĆĆććĈ ½ĉĊċ Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS9 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. TEMPEST TORCH FIRE IN MOTION ™ Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS9 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Breaking the barriers of standard torch design, Travis Industries proudly unveils the Tempest Torch™ - a dramatic decorative outdoor gas lamp. The patent pending Tempest Torch has an enchanting, spiraling flame dancing within the tempered glass walls. This natural venturi effect of fire is created without the use of electricity or a fan. 2 /Fire In Motion DECK POST INSTALLATION (Posts have been wrapped in a wood base) Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS9 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. You have the option to install the Tempest Torch as: - Wall Mount, for entry ways and sides on building - Deck Mount Post, for installation on decks (94” tall) - In Ground Post, for installation in ground (buried) - Pillar Mount, for columns or pedestals (6” tall) www.tempesttorch.com / 3 PIEZO IGNITER MODEL The manual light model works with a built-in Piezo igniter and easy access control panel. Available in NG and LP Models. PICK THE MODEL THAT BEST MEETS YOUR NEEDS ELECTRONIC 24V MODEL Electric 24V torches can be used with a light switch, remote control, programmable timer or wired into a SmartHome system. Available in NG and LP Models. The Electric 24V model has the miniturized gas valve built into the post. This model can be wired up to 445 feet from the transformer (See Owners Manual for details). The manual light model features easy access control panel with Piezo igniter for easy lighting and high to low flame control. Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS9 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 6 / Fire In Motion FEATURES YOU’RE GOING TO LOVE • The Tempest Torch™ can be installed in four different ways: - Ground Post - Deck Post - Pillar Mount - Wall Mount • The Tempest Torch™ has an automatic gas shut off if the flame goes out as an added safety feature. • Optional removable rain cap included. • Tempered glass panels are easy to remove for cleaning and service. • Durable stainless steel frame and burner. • Natural Gas and Propane models. DECK POST MOUNT INSTALLATION WALL MOUNT INSTALLATION The exterior of your home is one of the first things you see after a long day. Enhance the view of your home with wall mounted Tempest Torches. Nothing says welcome home more than an elegantly lit entryway. Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS9 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 3” 3” Dia. 3” Dia. Deck Mount Post In Ground Post (Buried) 3”Dia. BY TRAVIS INDUSTRIES Optional Raincap Torch Head (NG or LP) Pillar Mount Deck Post Cover Minimum Clearances To Combustibles Floor: 2.5” combustible floor to bottom (base) of torch Walls: 8” measured from glass surface Ceiling: 26” measured from the torch top (glass frame) with or without the raincap. (Refer to the Owner’s Manual for further details) Gas Rating NG LP Btus/Hr High 20,000 20,000 Btus/Hr Low 14,000 17,000 FOR YOUR SAFETY: FOR OUTDOOR INSTALLATION ONLY! Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Testing WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or the gas supplier. Applicable portions of ANSI Z21.42a-2004 “Illuminating Appliances”, CAN 1-2.15, CSA 4.96 U.S. (3rd Ed) “Outdoor Gas Fireplace”, and AGA 8-96, “Requirement for Gas-Fired Decorative Illuminating Appliances for Outdoor Installation.” 27-3/4” Wall Mount 22” 17-1/2” 30” Burial 118” total height with Head and Rain Cap Post only 93” 94” total height with Head and Rain Cap Post only 69” 13” 8-3/4” 19-1/2” 22” 11” 31” Electronic 24V Model Install up to four torches on a single transformer and up to seven transformers on one 120 volt 15 amp circuit. Manufactured by Travis Industries, In Mukilteo, WA T. I. reserves the right to improve our products at any time without prior notification. Photos and illustrations are for descriptive purposes only. 98800075 7/2018 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS11 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Conforms to ANSI/UL Standard 2108 Certified to CAN/CSA Standard C22.2 No. 250.0 PRODUCT FEATURES 90+ CRI Dimmable 50,000 hour life UL-listed for indoor and outdoor use 3M Industrial adhesive backing For use with 24V power supplies KELVIN COLOR TEMPERATURE SCALE 2,000K2,400K2,700K5,000K6,000K3,000K3,500K4,100K Suitable for most direct view applications UL LISTED C USR 24 O Cut Intervals: 25mm (0.98") DC24V+ - - +DC24V+ - - + DC24V+ - - + DC24V+ - - + DC24V+ - - +DC24V+ - - + DK27K-WR-24V 2700K 357 lm/ft IP67 DK3K-WR-24V 3000K 390 lm/ft IP67 DK35K-WR-24V 3500K 410 lm/ft IP67 DK41K-WR-24V 4100K 440 lm/ft IP67 DK5K-WR-24V 5000K 473 lm/ft IP67 5-year warranty SPECIFICATIONS Series DK - Direct View 400 (Outdoor) Input Voltage 24V DC / Constant Voltage Watts per Foot 3.3W/ft @ Maximum Run Length Max Run Length Unlimited, power every 18ft Cut Intervals 0.98" (25mm) End Cap Dimensions 9/16" (14.2mm) x 3/8" (9mm) Tape Dimensions 17/32" (13.2mm) x 1/4" (6mm) CRI 90+ Diode Epistar 2016 Dimming Options PWM, Triac, 0-10V, DMX, Hi-lume Temp Range -40°F (-40°C) to 149°F (65°C) Beam Spread 120° Kelvin Lumens Rating MODEL: TOTAL WATTAGE USED AT EACH LENGTH 1ft 2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 11ft 12ft 13ft 14ft 15ft 16ft 17ft 18ft 4.3 8.7 12.9 17.5 21.4 25.3 29.1 32.6 36.5 40 43.2 46.1 48.9 51.5 53.4 55.8 58 59.4 Questions/Support | 800-789-3810 | quotes@kelvix.com 090718DM Fixture Type: Project: Location: Width: 13.2mm (14.2mm end cap) Depth: 6mm (9 mm endcap) DK-SERIES | RUBBER COATED | LINEAR LED LIGHTING DIRECT VIEW 400 (OUTDOOR) TITLE 24 JA8-2016 Supports Compliance Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS11 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Applications ORDERING INFORMATION 14.1 mm18.3 mm 18.3 mmEnd cap with hole End cap without hole Clear lens (CL) Frosted lens (FR) White lens (WH) Mounting clip (CP) CH-607 18.3mm (3/4) SPECIFICATIONS Model Length External Width PRODUCT FEATURES Extruded aluminum construction Available in 2 meter sections 2 meters Anodized matte finish Consult factory for custom lengths & finishes Internal Width 14.1mm (9/16) Height 18.3mm (3/4) Example: CH607-2-WH-CP-EC Lens CL - Clear FR - Frosted WH - White Series CH-607 CH607 Length 2 meter 2 Mounting CP - Mounting Clip End Cap EC - End Caps (included) ECCP Questions/Support | 800-789-3810 | quotes@kelvix.com 0117187NH Fixture Type: Project: Location: EXTRUDED ALUMINUM MOUNTING CHANNEL CH-607 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS12 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Ordering Codes Job Name: Contact: Fixture Type:Ordering Code: In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.11.20.17 Page 1 of 4ZETA750 www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway Circle Tustin, CA 92780 PH: 714.259.9959 FAX: 714.259.9969 Beam Face Type Wall Thickness ZETA750 Housing Description Mounting Electrical / Led Driver LED Performance Listings Extremely durable 316 stainless steel marine grade housing, with 3.5” (90mm) 20AWG wire leads. Choice of Thin Wall (recommended for ease of installation), or Heavy Wall. Curved face or flat face options available in three different beam patters 60°, 90° asymmetric, and 120°. The ZETA750 Series Puck is the most flexible and vandal resistant LED handrail lighting module on the market, offering unrivalled uniformity and photometric performance. Designed with the specifier in mind, it accommodates a wide range of options of beam distribution for a clean design. The pucks can be installed in new handrail or retrofitted into existing handrail, flat or oval metallic structures and surfaces. Powerful yet small and unobtrusive, makes the Handrail Puck ideal for incorporation into street sculptures, illuminating artwork or to wash walls with clean, white LED light. The ZETA750 is engineered of electroplated 316 stainless steel. Other custom materials are available including aluminum, brass, and super-duplex stainless steel (which offers exceptional corrosion resistance), as well as custom painted finishes. Please consult factory for these custom options. At standard handrail height the pucks provide 11 foot-candles at the surface below. They are offered with wide, narrow, and asymmetric beam patterns. ETL wet rated for outdoor applications. For round handrail, the LED pucks are field installed with use of the ZETA750 series Drill Tool Kit. For flat surfaces, the installer may use their own drill bits and threading taps. Please refer to the installation instructions. Type of Surface- Install in metallic surface only for proper thermal dissipation. Luminaire is for use in non-insulated recessed surfaces. Fits Railing size - Ø38.0mm, 1.496in to 100.0mm, 3.937in. Thin Wall Puck minimum wall thickness - 1.5mm, 0.059in. Heavy Wall Puck minimum wall thickness - 2.5mm, 0.980in. Minimum distance between lights - 101.6mm, 4.000inches (center to center). Max 16 lights may be connected in series. - 3VDC, 500mA, 1.5W (Remote Driver Required) - ETLus Listed to UL2108 (suitable for wet locations) - cETL Listed to CSA C22.2 #250.0 - Impact tested to IK10 (EN62262) - IP66 rated - ADA Compliant when using handrail diameter 31.75mm (1.25”) to 38.1mm (1.5”) O.D. 750 1 2 3 Standard 60º Symmetric 120º Assymetric 90º Rail Puck 1 2 1 2 Curved Flat Heavy Thin Follow the steps to specify your fixture, example: 750 - 4 - 2 - 1 - 1 Part Number CCT 2 3 4 5 2700k 3000k 4000k 5000k LED: DUV: CCT: CRI: Life: Warranty: Cree XPG .001 2700k, 3000k, 4000k, 5000k >80* 90% at 51k hrs based on LM-80 testing 5 year limited warranty *At 5000K CRI >70 Lumens CCT 104 lm 111 lm 119 lm 127 lm 2700k 3000k 4000k 5000k - Mounts to pipe size: Ø38mm - Ø100mm - Wall thickness ≥ 2.5mm - Mounting thread: M16x1mm - Requires counterbore Ø16mm x 1.8mm - Mounts to pipe size: Ø38mm - Ø100mm - Wall thickness ≥ 1.5mm - Mounting thread: M16x1mm - Mounts to flat surfaces - Wall thickness ≥ 2.5mm - Mounting thread: M16x1mm - Requires counterbore Ø16mm x 1.8mm - Mounts to flat surfaces - Wall thickness ≥ 1.5mm - Mounting thread: M16x1mm Heavy Wall Curved Face Thin Wall Curved Face Heavy Wall Flat Face Thin Wall Flat Face 15mm Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS12 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 60º 90º 120º 90º 105º 105º 75º 60º 45º 1000º 600º 400º 45º 60º 75º 90º 800º 90º 105º 105º 75º 60º 45º 1000º 600º 400º 45º 60º 75º 90º 800º 90º 105º 105º 75º 60º 45º 1000º 600º 400º 45º 60º 75º 90º 800º Job Name: Contact: Fixture Type:Ordering Code: In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.11.20.17 Page 2 of 4ZETA750 www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway Circle Tustin, CA 92780 PH: 714.259.9959 FAX: 714.259.9969 Standard 60º Assymetric 90º Symmetric 120º Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS12 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. Job Name: Contact: Fixture Type:Ordering Code: In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.11.20.17 Page 3 of 4ZETA750 www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway Circle Tustin, CA 92780 PH: 714.259.9959 FAX: 714.259.9969 60º W HS S S S 90º S S S S S S S S W HW H60º STANDARD BEAM lx = average lux u = uniformity color temp = 3000K path width STANDARD BEAM - LIGHT FROM ONE SIDE LED Spacing 0.5m 1.0m 2.0m 1.2m 2.0m 3.0m 4.0m lx 107 55 27 lx 82 41 21 lx 61 31 15 lx 47 24 12 u 0.67 0.76 0.78 u 0.51 0.58 0.59 u 0.31 0.34 0.34 u 0.19 0.21 0.21 lx = average lux u = uniformity color temp = 3000K path width STANDARD BEAM - LIGHT FROM BOTH SIDES LED Spacing 0.5m 1.0m 2.0m 1.2m 2.0m 3.0m 4.0m lx 216 109 55 lx 164 83 41 lx 121 61 31 lx 95 48 24 u 0.76 0.82 0.84 u 0.68 0.72 0.72 u 0.66 0.72 0.71 u 0.66 0.72 0.72 W = Path Width H = handrail height (900mm nominal) S = LED spacing 90º VERTICAL ASYMMETRIC lx = average lux u = uniformity color temp = 3000K path width STANDARD BEAM - LIGHT FROM ONE SIDE LED Spacing 0.5m 1.0m 2.0m 1.2m 2.0m 3.0m 4.0m lx 95 48 23 lx 73 37 18 lx 52 27 13 lx 40 20 10 u 0.8 0.89 0.89 u 0.45 0.51 0.51 u 0.21 0.23 0.23 u 0.15 0.16 0.16 lx = average lux u = uniformity color temp = 3000K path width STANDARD BEAM - LIGHT FROM BOTH SIDES LED Spacing 0.5m 1.0m 2.0m 1.2m 2.0m 3.0m 4.0m lx 193 97 48 lx 148 74 37 lx 105 53 27 lx 81 41 20 u 0.89 0.9 0.84 u 0.8 0.8 0.8 u 0.77 0.86 0.84 u 0.62 0.66 0.68 W = Path Width H = handrail height (900mm nominal) S = LED spacing 120º VERTICAL SYMMETRIC lx = average lux u = uniformity color temp = 3000K path width STANDARD BEAM - LIGHT FROM ONE SIDE LED Spacing 0.5m 1.0m 2.0m 1.2m 2.0m 3.0m 4.0m lx 147 74 36 lx 113 57 28 lx 79 40 19 lx 58 29 14 u 0.7 0.71 0.22 u 0.4 0.44 0.11 u 0.12 0.12 0.03 u 0.02 0.02 0.01 lx = average lux u = uniformity color temp = 3000K path width STANDARD BEAM - LIGHT FROM BOTH SIDES LED Spacing 0.5m 1.0m 2.0m 1.2m 2.0m 3.0m 4.0m lx 195 95 43 lx 103 52 25 lx 61 32 15 lx 46 24 11 u 0.87 0.88 0.25 u 0.56 0.62 0.15 u 0.12 0.11 0.05 u 0.02 0.02 0.01 W = Path Width H = handrail height (900mm nominal) S = LED spacing Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS12 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. ZETA750 Tool Kit - For Round Handrail Driver Matrix Driver Quantity Power Spec Flat Surfaces - No Toolkit Required Job Name: Contact: Fixture Type:Ordering Code: In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v.11.20.17 Page 4 of 4ZETA750 www.alphabetlighting.comAlphabet By Ledra Brands 15774 Gateway Circle Tustin, CA 92780 PH: 714.259.9959 FAX: 714.259.9969 * Not shown, wire crimping pliers. * Not shown, wire crimping pliers. 26W LED Driver 50W LED Driver w/ box 50W LED Driver w/ box 50W LED Driver w/ box 50W LED Driver w/ box 50W LED Driver w/ box for 2-16 fixtures for 1-15 fixtures per channel (1 channel driver) for 1-15 fixtures per channel (2 channel driver) for 1-15 fixtures per channel (1 channel driver) for 1-15 fixtures per channel (2 channel driver) for 1-10 fixtures per channel (3 channel driver) 120-277V, 26W, 500mA, Trailing Edge (ELV) dimming 120-277V, 50W, 500mA, 0-10V (1%) dimming 120-277V, 50W, 500mA, 0-10V (.1%) dimming 120-277V, 50W, 500mA, DALI (1%) dimming 120-277V, 50W, 500mA, DALI (.1%) dimming 120-277V, 50W, 500mA, DMX/ ROM (0%) dimming P70418-500 P70414-500-ECO P70414-500-SOLO P70469-500-ECO P70469-500-SOLO P70470-500 1 x drill jig with clamp 1 x drill clutch assembly with 15 + 16mm cutters 1 x drill tap assembly with M16 x 1 tap 1 x M16 x 1 tap (spare) 1 x File 2 x 15mm cutters (spares) 1 x 16mm cutter (spare) 2 x cutter removal tools 1 x 10mm nut driver 1 x 2mm Allen key kit 1 x insertion tool 1 x bottle of cutting fluid Note Rental Procedures and Fees 1. All driver boxes are nema 1 rated for dry location only. wet rated nema enclosure to be provided by contractor as needed. - For thin wall pucks: Drill 15mm hole in mounting surface; then thread 15mm hole using M16x1mm tap. - For thick wall pucks: Drill 15mm hole in mounting surface; drill 16mm counterbore 1.8mm deep; then thread 15mm hole using M16x1mm tap. - Drill bits/taps provided by others. - Tool Kits are rented for a period of 30 days from time of shipping. - Kits will need a separate PO for the cost to replace the kit as a DEPOSIT to be invoiced if not returned on time or in working order. - No invoice will be issued if Kit is returned within allotted time inspected for to ensure noting is missing and it is operable. - A non-refundable / non-negotiable RENTAL FEE for consumables and labor is charged for every order. - Consult factory for fees as they are subject to change. 1 2 3 4 5 6 7 8 9 10 11 12 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS13 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. SliverLED ® Round Adjustable SR21 SliverLED provides a true point source solution where previously only halogen and metal halide sources would do. As the highest performing recessed LED downlight with a 1-3/4 aperture and low glare, SliverLED matches the look and feel of well-loved legacy light sources with all of the modern efı ciency and lifetime beneı ts of LED. Now available in more light outputs, with Warm Glow Dimming, IC-rated housings, and a ı eld-paintable primer ı nish option, SliverLED is ideal for residential, hospitality, and restaurant settings. FEATURES Smooth, low proı le trim available in factory painted ı nishes of white, black, bronze, and metallic grey. Field-paintable primer ı nish and custom RAL colors also available. Overlap Ĳ ange trims are compatible with sheetrock, ACT, wood/millwork, and many other ceiling materials up to 1 thick. Optional spackle collar accessory available for Ĳ ush-mount, mud-in installation in sheetrock. Narrow IC-Rated housings can squeeze between 12 on center joists Industry leading illumination and craftsmanship Color Rendering Index: Source Lumens: Lumens Per Watt: Delivered Lumens: *Performance data based on 3000K DELIVERED* PERFORMANCE: 80+ 90+ 1100 950 67 58 625 550 9W Classic White SLIVERLED DOWNLIGHT PERFORMANCE DATA T 8455658500 F 8455611130 1126 River Road New Windsor, NY 12553 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Patents pending. USAI, SliverLED, Warm Glow Dimming and Color Harmony are registered trademarks of USAI, LLC Revised 01/04/2018 usailighting.com info@usailighting.com SLIVERLED® ADJUSTABLE usailighting.com/sliverled LED COLOR CHOICES 80+ 90+ 1600 1400 67 58 925 800 15W Color Rendering Index: Multiplier for Lumen Output: CORRELATED COLOR TEMPERATURE Classic White 80+ 90+ 0.93 0.81 2700K 80+ 90+ 1.07 0.87 3500K 80+ 90+ 1.00 0.87 3000K 4000K 80+ 1.07 Warm Glow Dimming 80+ 90+ 900 625 32 22 500 350 16W Page 1 80+ 90+ 0.94 0.67 2700K 80+ 90+ 1.00 0.70 3000K Warm Glow Dimming Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS13 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. SLIVERLED® FAMILY TRIMS SR41 1/4 Regress SS11 1 Regress SR21 TRIM DIMENSIONS T 8455658500 F 8455611130 1126 River Road New Windsor, NY 12553 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Patents pending. USAI, SliverLED, Warm Glow Dimming and Color Harmony are registered trademarks of USAI, LLC Revised 01/04/2018 usailighting.com info@usailighting.com SliverLED ® Round Adjustable SR21 ADJUSTABLE WALL WASH 315ĳ16 Ø 13ĳ4 Ø 1/16" SS41 1/4 Regress SR51 SS51 SR21 SR21W Wet Location SS21 SR11 1 Regress 7" Ø SCR2- ROUND SPACKLE COLLAR ACCESSORY For Ĳ ush-mount installations, order spackle collar accessory DOWNLIGHT SS21W Wet Location Page 2 FIELD REPLACEABLE LED LIGHT ENGINE is serviceable through the aperture with a Philips screwdriver. All USAI Lighting LED light engines feature industry-leading color consistency. Classic white light engines maintain perfectly white light in all conditions. Warm Glow dimming light engines gradually shift color to a warm 2200K when dimmed, indistinguishable from incandescent. FIELD REPLACEABLE DIMMING DRIVER is serviceable from below the ceiling through the aperture. 0-10V, 100%-1% DIML6E dimming driver provided standard. Each solid state electronic constant current driver has a high power factor and sources 2mA. Drivers comply with IEEC62.41 surge protection. Other dimming drivers optionally available. Some on-time delay may be experienced depending on control system used. EMERGENCY Emergency lighting battery pack with remote test switch requires above ceiling access. IOTA ILB-CP07 provides 7W of backup power for 90 minutes. Wet location option also available. EM not available with IC housings. Emergncy Mode Performance* 9W 15W 16W Multiplier for Lumen Output in EM Mode 0.92 0.63 0.55 *apply to delivered performance FIXTURE WEIGHT Standard housing with trim weighs 5.5 lbs, emergency housing with trim weighs 8 lbs. 9W IC housing weighs 6.5 lbs, and 15W/16W IC housing weighs 10 lbs. HOUSING Universal housing style allows the ability to swap trim styles between Downlight, Adjustable and Wall Wash. Fabricated of 18 ga. black powder coated steel with thru wire J-box, 2 in 2 out at min. 90°C, #12 AWG thru branch circuit wiring. IC housings are rated for direct contact with insulation up to R30 or less. MOUNTING ButterĲ y brackets and adjustable nailer bars with integral nails provided. Nailer bars are extendible from 14 to 24 centers. Channel bars optionally available for dropped ceiling installation. CEILING CUT OUT 3-5/8 Ø ADJUSTMENT Hot Aiming with adjustable optic is tool-less with lift and lock mechanism for 0°-35° locking vertical tilt. Friction ı t adjustment of 362° locking horizontal rotation from below, without trim removal. TRIM LENS Dry/damp location SliverLED adjustable ı xtures do not retain any lens at the trim face. ACCESSORY HOLDER Snap-in accessory holder is shipped with adjustable ı xtures standard and retains the lens option, there is no lens at the trim face. For 15º optic, the accessory lens is clear glass; for 25º optic, the accessory lens is solite glass; for WGD optics, the accessory lens is microdiffusion. Accessory holder can accept 1 size M optical accessory in addition to lens option provided standard for the beamspread chosen, additional optical accessories can be speciı ed in the accessories column. LISTINGS Dry/Damp. NRTL/CSA-US Tested to UL Standards. IBEW Union made. NC housing is UL2043 rated for use in Air Handling Plenum. WARRANTY Based on IESNA LM80-2008, SliverLED has a 50,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers replacement parts for 5 years from date of shipment. NOTES Not for use in corrosive environment Use spackle collar accessory for Ĳ ush-mount, spackle-in sheetrock applications Interior use only. PHOTOMETRICS Consult factory or website for IES ı les. Tested in accordance with IESNA LM79. www.usailighting.com/sliverled SLIVERLED SPECIFICATIONS Max Tilt36° 0° Position 315ĳ16 Ø 13ĳ4 Ø Trim Finish BafĲ eFinish Accessory Lens Optic LENS DETAIL Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS13 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 7" Ø HOW TO SPECIFY SliverLED Adjustable SR21 SliverLED Round Adjustable Wattage Options X109 9W LED Module X115 15W LED Module LED Color Temperature Options 27KS 2700K, 80+ CRI 30KS 3000K, 80+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI 27KH 2700K, 90+ CRI 30KH 3000K, 90+ CRI 35KH 3500K, 90+ CRI 2722KS 2700K, 80+ CRI 3022KS 3000K, 80+ CRI 2722KH 2700K, 90+ CRI 3022KH 3000K, 90+ CRI Beam Options 15 15° Beam 25 25° Beam 20 20° beam 30 30° beam Trim Finish Options WH White BZ Bronze BL Black GR Metalized Grey PR Primer FInish RAL Custom Color (specify RAL#) BafĲ e Finish WH White BL Black SR21 Classic White SliverLED ® Round Adjustable SR21 T 8455658500 F 8455611130 1126 River Road New Windsor, NY 12553 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Patents pending. USAI, SliverLED, Warm Glow Dimming and Color Harmony are registered trademarks of USAI, LLC Revised 01/04/2018 usailighting.com info@usailighting.com TRIM ORDERING INFORMATION Product SV SliverLED Housing Options NC New Construction Mounting Pan IC Insulation- Contact Rated / Airtight Voltage Options UNV Wattage Options X109 9W LED Module X115 15W LED Module 16 WG1 16W LED Module 120V EM Options EM Emergency Battery EMW Emergency Battery Wet Location EM Options not available with IC housings Dimming Driver Options For use with Universal Voltage 120V - 277V D2 0-10V dim, 10% (1) D4 Lutron Hi-Lume 1% 3-wire/ECO D4E Lutron 5 ECO, 5% (1, 2) D4H Lutron H ECO, 1% Fade (1,2) D6A EldoLED 0-10V, 0.1%, logarithmic/Lutron controls (1) D6B EldoLED 0-10V, 0.1%, linear controls (1) D6E EldoLED 0-10V, 1%, logarithmic/ Lutron controls (provided standard) D6F EldoLED 0-10V, 1%, linear controls D7 EldoLED DALI, 0.1% (1) For use with 120V only D3 Lutron Hi-Lume 1% 2-wire, 120V only D19 Phase dimming 1%, 120V only (2) 1 Not Available with X109 LED 2 Not available with 16W Warm Glow LED SV Classic White HOUSING ORDERING INFORMATION Accessory Options CB27 27 C-Channel Bars CB52 52 C-Channel Bars SCR2 Round Spackle Collar Accessory for Ĳ ush mount installation in sheetrock AL20M Accessory Lens AL30M Accessory Lens AL40M Accessory Lens ACCESSORIES Page 3 16 WG1 16W LED Module Warm Glow Dimming Warm Glow Dimming Accessory Lens C Clear S Solite M Micro Diffusion SliverLED Optical Accessories Matrix if you and you haveࡕ. wantࡕ 15° 20° 25° 30° 15° beam C N/A N/A N/A 20° beam AL20M M N/A N/A 25° beam AL30M AL20M S N/A 30° beam AL40M AL30M AL20M M 35° beam N/A AL40M AL40M AL20M Hexcell louver HEXM HEXM HEXM HEXM Size M Size M Size M Size M Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS13 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. T 8455658500 F 8455611130 1126 River Road New Windsor, NY 12553 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. Patents pending. USAI, SliverLED, Warm Glow Dimming and Color Harmony are registered trademarks of USAI, LLC Revised 01/04/2018 usailighting.com info@usailighting.com SliverLED ® Round Adjustable SR21 Page 4 SLIVERLED HOUSING FROM USAI 7-5/8" 12-5/8" New Construction Housing - NC 16-1/8" 12-5/8 16-1/8 Insulation Contact Rated - IC Airtight (9W) 5" 1" Insulation Contact Rated - IC Airtight (15W & 16W) 6-3/4" 1" 16" 4-13/16" 11-1/4" 10" * Nailer bars are provided standard Maximum ceiling thickness = 1 * Nailer bars are provided standard Maximum ceiling thickness = 1 4-5/8" 1" 4-1/8" 8-1/2" 4-1/8" 8-1/2" 7-5/8" 19-5/8 * Nailer bars are provided standard Maximum ceiling thickness = 1 New Construction Emergency - EM * Nailer bars are provided standard Maximum ceiling thickness = 1 9-3/8" 12-5/8" 16-1/8" 4-1/8" 8-1/2" 5-1/2" 1 Project: 1170 Westhaven Lane HLB Project #: 18176 Date: 26 November 2018 Submital: Type: FS13 Horton Lees Brogden Lightng Design | 3575 Ringsby Ct, Suite 402, Denver, CO 80216 | P: 303 317 5006 | www.HLBlightng.com LIGHTING CONTROL CUT SHEET Note: This document is for informaton only. Refer to specificatons for all catalog numbers, etc. 1126 River Road New Windsor, NY 12553 www.usailighting.com info@usailighting.com © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4EH Revised 03/22/2017 T 8455658500 F 8455611130USAI ® Lighting DIMMING DRIVER COMPATIBILITY SELECTION GUIDE D4E / DIML4E and D4H /DIML4H DIMMING DRIVER WIRING SCHEMES: USAI® Lighting D4E / DIML4E EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 100%5% 132 1 16 Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 100%5% 164 1 32 Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 100%5% 164 1 32 Lutron Quantum Various 100%5% 164 1 32 D4E / DIML4E LED: Lutron 5 Series EcoSystem LED Driver / LED Dimming Driver Wiring (Dims down to 5%) * NOTE: Number of ı xtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. LED D4E / DIML4E and D4H / DIML 4H EcoSystem CONTROLS PURPLE GRAY PURPLE BLACK WHITE GREEN GND V+ RED V- BLACK FIXTURE DRIVER WALL CONTROL (BY OTHERS) LINE NEUTRAL E2 E1 E1 ECOSYS BUS E2 D4H / DIML4H EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 100%1% 132 1 16 Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 100%1% 164 1 32 Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 100%1% 164 1 32 Lutron Quantum Various 100%1% 164 1 32 D4H / DIML4H LED: Lutron H Series EcoSystem LED Driver with Fade to Black (dims down to 1%) * NOTE: Number of ı xtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to ı xture. These diagrams arenot intended to specify all equipment necessary for a given dimming circuit. Refer to speciı c dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualiı ed electricians in accordance to local codes should install these ı xtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). PREVENT FRAUD - Please remember to call a member of our closing team when initiating a wire transfer or providing wiring instructions. Customer Distribution Our Order Number: V50050015 Date: 02-20-2018 Property Address: 1170 WESTHAVEN LANE, VAIL, CO 81657 For Title Assistance EAGLE COUNTY TITLE TEAM 610 WEST LIONSHEAD CIRCLE #300 VAIL, CO 81657 970-477-4500 (phone) 970-476-4534 (fax) eaglecountyrequests@ltgc.com PLEASE CONTACT YOUR CLOSER OR CLOSER'S ASSISTANT FOR WIRE TRANSFER INSTRUCTIONS Seller/Owner IGNACIO TORRAS Delivered via: Electronic Mail K.H. WEBB ARCHITECTS Attention: KYLE WEBB 710 W LIONSHEAD CIR #A VAIL, CO 81657 970-477-2990 (work) sam@khwebb.com Delivered via: Electronic Mail Land Title Guarantee Company Estimate of Title Fees Order Number: V50050015 Date: 02-20-2018 Property Address: 1170 WESTHAVEN LANE, VAIL, CO 81657 Buyer/Borrower: A BUYER TO BE DETERMINED Seller: IGNACIO TORRAS Visit Land Title's website at www.ltgc.com for directions to any of our offices. Estimate of Title Insurance Fees TBD Commitment $216.00 If Land Title Guarantee Company will be closing this transaction, the fees listed above will be collected at closing. Total $216.00 THANK YOU FOR YOUR ORDER! ALTA COMMITMENT Old Republic National Title Insurance Company Schedule A Order Number: V50050015 Customer Ref-Loan No.: Property Address: 1170 WESTHAVEN LANE, VAIL, CO 81657 1. Effective Date: 02-15-2018 At 5:00 P.M. 2. Policy to be Issued and Proposed Insured: "TBD" Commitment $0.00 Proposed Insured: A BUYER TO BE DETERMINED 3. The estate or interest in the land described or referred to in this Commitment and covered herein is: A FEE SIMPLE 4. Title to the estate or interest covered herein is at the effective date hereof vested in: IGNACIO TORRAS 5. The Land referred to in this Commitment is described as follows: LOT 39-1, A RESUBDIVISION OF LOT 39, AMENDED PLAT GLEN LYON SUBDIVISION, ACCORDING TO THE PLAT RECORDED AUGUST 28, 1986 IN BOOK 447 AT PAGE 679, COUNTY OF EAGLE, STATE OF COLORADO. Copyright 2006-2018 American Land Title Association. All Rights Reserved The use of this Form is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. ALTA COMMITMENT Old Republic National Title Insurance Company Schedule B, Part I (Requirements) Order Number: V50050015 The following are the requirements must be met: This proposed Insured must notify the Company in writing of the name of any party not referred to in this Commitment who will obtain an interest in the Land or who will make a loan on the Land. The Company may then make additional Requirements or Exceptions. Pay the agreed amount for the estate or interest to be insured. Pay the premiums, fees, and charges for the Policy to the Company. Documents satisfactory to the Company that convey the Title or create the Mortgage to be insured, or both, must be properly authorized, executed, delivered, and recorded in the Public Records. THIS COMMITMENT IS FOR INFORMATION ONLY, AND NO POLICY WILL BE ISSUED PURSUANT HERETO. Old Republic National Title Insurance Company Schedule B, Part II (Exceptions) Order Number: V50050015 This commitment does not republish any covenants, condition, restriction, or limitation contained in any document referred to in this commitment to the extent that the specific covenant, conditions, restriction, or limitation violates state or federal law based on race, color, religion, sex, sexual orientation, gender identity, handicap, familial status, or national origin. 1. Any facts, rights, interests, or claims thereof, not shown by the Public Records but that could be ascertained by an inspection of the Land or that may be asserted by persons in possession of the Land. 2. Easements, liens or encumbrances, or claims thereof, not shown by the Public Records. 3. Any encroachment, encumbrance, violation, variation, or adverse circumstance affecting the Title that would be disclosed by an accurate and complete land survey of the Land and not shown by the Public Records. 4. Any lien, or right to a lien, for services, labor or material heretofore or hereafter furnished, imposed by law and not shown by the Public Records. 5. Defects, liens, encumbrances, adverse claims or other matters, if any, created, first appearing in the public records or attaching subsequent to the effective date hereof but prior to the date of the proposed insured acquires of record for value the estate or interest or mortgage thereon covered by this Commitment. 6. (a) Taxes or assessments that are not shown as existing liens by the records of any taxing authority that levies taxes or assessments on real property or by the Public Records; (b) proceedings by a public agency that may result in taxes or assessments, or notices of such proceedings, whether or not shown by the records of such agency or by the Public Records. 7. (a) Unpatented mining claims; (b) reservations or exceptions in patents or in Acts authorizing the issuance thereof; (c) water rights, claims or title to water. 8. RIGHT OF PROPRIETOR OF A VEIN OR LODE TO EXTRACT AND REMOVE HIS ORE THEREFROM SHOULD THE SAME BE FOUND TO PENETRATE OR INTERSECT THE PREMISES AS RESERVED IN UNITED STATES PATENT RECORDED DECEMBER 29, 1920, IN BOOK 93 AT PAGE 42. 9. RIGHT OF WAY FOR DITCHES OR CANALS CONSTRUCTED BY THE AUTHORITY OF THE UNITED STATES AS RESERVED IN UNITED STATES PATENT RECORDED DECEMBER 29, 1920, IN BOOK 93 AT PAGE 42. 10. RESTRICTIVE COVENANTS WHICH DO NOT CONTAIN A FORFEITURE OR REVERTER CLAUSE, BUT OMITTING ANY COVENANT OR RESTRICTION BASED ON RACE, COLOR, RELIGION, SEX, HANDICAP, FAMILIAL STATUS OR NATIONAL ORIGIN UNLESS AND ONLY TO THE EXTENT THAT SAID COVENANT (A) IS EXEMPT UNDER CHAPTER 42, SECTION 3607 OF THE UNITED STATES CODE OR (B) RELATES TO HANDICAP BUT DOES NOT DISCRIMINATE AGAINST HANDICAP PERSONS, AS CONTAINED IN INSTRUMENT RECORDED APRIL 04, 1978, IN BOOK 268 AT PAGE 698 AND AS AMENDED IN INSTRUMENT RECORDED AUGUST 25, 1987, IN BOOK 468 AT PAGE 447, 448, 449, 450, 451, 452, 453, 454, 455, 456, 457, 458, 459, 460, 461, 462, 463, 464, 465, 466, 467, 468, 469, 470, 471, 472 AND AS AMENDED IN INSTRUMENT RECORDED SEPTEMBER 3, 1987 IN BOOK 469 AT PAGE 38 AND 39 AND IN INSTRUMENT RECORDED SEPTEMBER 15, 1987, IN BOOK 469 AT PAGE 801 AND AS AMENDED IN INSTRUMENT RECORDED MAY 2, 1990 IN BOOK 528 AT PAGE 154. Old Republic National Title Insurance Company Schedule B, Part II (Exceptions) Order Number: V50050015 11. EASEMENTS, CONDITIONS, COVENANTS, RESTRICTIONS, RESERVATIONS AND NOTES ON THE PLAT OF GLEN LYON SUB RECORDED JULY 18, 1978 UNDER RECEPTION NO. 163538. 12. TERMS, CONDITIONS AND PROVISIONS OF CONVEYANCE OF ROADWAY EASEMENT RECORDED AUGUST 21, 1978 IN BOOK 273 AT PAGE 611, RECORDED AUGUST 25, 1978 IN BOOK 273 AT PAGE 981 AND RECORDED MARCH 14, 1979 IN BOOK 282 AT PAGE 883. 13. TERMS, CONDITIONS AND PROVISIONS OF CONVEYANCE OF EASEMENT TO BE KNOWN AS THE "WESTIN HO TRAIL" RECORDED SEPTEMBER 28, 1984 IN BOOK 395 AT PAGE 935 AND AMENDMENT RECORDED FEBRUARY 11, 2000 UNDER RECEPTION NO. 722446 AND AS SHOWN ON THE PLAT RECORDED AUGUST 28, 1986 IN BOOK 447 AT PAGE 679 AND AMENDMENT RECORDED FEBRUARY 11, 2000, UNDER RECEPTION NO. 722446. 14. TERMS, CONDITIONS AND PROVISIONS OF TRENCH, CONDUIT, AND VAULT AGREEMENT RECORDED MARCH 12, 1999 AT RECEPTION NO. 689570. 15. TERMS, CONDITIONS AND PROVISIONS OF HOLY CROSS ELECTRIC ASSOCIATION, INC., UNDERGROUND RIGHT OF WAY EASEMENT RECORDED MARCH 12, 1999 AT RECEPTION NO. 689571. 16. TERMS, CONDITIONS AND PROVISIONS OF EASEMENT RECORDED JUNE 23, 1999 AT RECEPTION NO. 700658. 17. TERMS, CONDITIONS AND PROVISIONS OF EASEMENT RECORDED JUNE 23, 1999 AT RECEPTION NO. 700659. 18. TERMS, CONDITIONS AND PROVISIONS OF EASEMENT RECORDED JUNE 23, 1999 AT RECEPTION NO. 700660. 19. TERMS, CONDITIONS AND PROVISIONS OF EASEMENT RECORDED JUNE 23, 1999 AT RECEPTION NO. 700661. 20. TERMS, CONDITIONS AND PROVISIONS OF EASEMENT RECORDED JUNE 23, 1999 AT RECEPTION NOS. 700662, 700663, 700664, 700665, 700666, 700667. 21. TERMS, CONDITIONS AND PROVISIONS OF DECLARATION RECORDED FEBRUARY 28, 2000 UNDER RECEPTION NO. 723599. NOTE: VACATIONS OF THE UTILITY EASEMENT SHOWN ON THE PLAT RECORDED AUGUST 28, 1989 IN BOOK 447 AT PAGE 679 RECORDED: MARCH 24, 1986 IN BOOK 438 AT PAGE 628, OCTOBER 16, 1990 IN BOOK 540 AT PAGE 220, DECEMBER 23, 1991 IN BOOK 569 AT PAGE 492 AND MARCH 1, 1993 IN BOOK 602 AT PAGE 904, MAY 4, 2000 UNDER RECEPTION NO. 729070, MAY 4, 2000 UNDER RECEPTION NO. 729071, MAY 4, 2000 UNDER RECEPTION NO. 729072, MAY 4, 2000 UNDER RECEPTION NO. 729073, AUGUST 16, 2000 UNDER RECEPTION NO. 736877 22. TERMS, CONDITIONS AND PROVISIONS OF EASEMENT RECORDED SEPTEMBER 07, 2003 AT RECEPTION NO. 849976. 23. TERMS, CONDITIONS AND PROVISIONS OF INSTRUMENT RECORDED DECEMBER 12, 2008 AT Old Republic National Title Insurance Company Schedule B, Part II (Exceptions) Order Number: V50050015 RECEPTION NO. 20082290. JOINT NOTICE OF PRIVACY POLICY OF LAND TITLE GUARANTEE COMPANY LAND TITLE GUARANTEE COMPANY OF SUMMIT COUNTY LAND TITLE INSURANCE CORPORATION AND OLD REPUBLIC NATIONAL TITLE INSURANCE COMPANY This Statement is provided to you as a customer of Land Title Guarantee Company and Meridian Land Title, LLC, as agents for Land Title Insurance Corporation and Old Republic National Title Insurance Company. We want you to know that we recognize and respect your privacy expectations and the requirements of federal and state privacy laws. Information security is one of our highest priorities. We recognize that maintaining your trust and confidence is the bedrock of our business. We maintain and regularly review internal and external safeguards against unauthorized access to non-public personal information ("Personal Information"). In the course of our business, we may collect Personal Information about you from: applications or other forms we receive from you, including communications sent through TMX, our web-based transaction management system; your transactions with, or from the services being performed by, us, our affiliates, or others; a consumer reporting agency, if such information is provided to us in connection with your transaction; and the public records maintained by governmental entities that we either obtain directly from those entities, or from our affiliates and non-affiliates. Our policies regarding the protection of the confidentiality and security of your Personal Information are as follows: We restrict access to all Personal Information about you to those employees who need to know that information in order to provide products and services to you. We maintain physical, electronic and procedural safeguards that comply with federal standards to protect your Personal Information from unauthorized access or intrusion. Employees who violate our strict policies and procedures regarding privacy are subject to disciplinary action. We regularly access security standards and procedures to protect against unauthorized access to Personal Information. WE DO NOT DISCLOSE ANY PERSONAL INFORMATION ABOUT YOU WITH ANYONE FOR ANY PURPOSE THAT IS NOT PERMITTED BY LAW. Consistent with applicable privacy laws, there are some situations in which Personal Information may be disclosed. We may disclose your Personal Information when you direct or give us permission; when we are required by law to do so, for example, if we are served a subpoena; or when we suspect fraudulent or criminal activities. We also may disclose your Personal Information when otherwise permitted by applicable privacy laws such as, for example, when disclosure is needed to enforce our rights arising out of any agreement, transaction or relationship with you. Our policy regarding dispute resolution is as follows. Any controversy or claim arising out of or relating to our privacy policy, or the breach thereof, shall be settled by arbitration in accordance with the rules of the American Arbitration Association, and judgment upon the award rendered by the arbitrator(s) may be entered in any court having jurisdiction thereof. LAND TITLE GUARANTEE COMPANY DISCLOSURE STATEMENTS Note: Pursuant to CRS 10-11-122, notice is hereby given that: A) The Subject real property may be located in a special taxing district. B) A certificate of taxes due listing each taxing jurisdiction will be obtained from the county treasurer of the county in which the real property is located or that county treasurer's authorized agent unless the proposed insured provides written instructions to the contrary. (for an Owner's Policy of Title Insurance pertaining to a sale of residential real property) C) The information regarding special districts and the boundaries of such districts may be obtained from the Board of County Commissioners, the County Clerk and Recorder, or the County Assessor. Note: Effective September 1, 1997, CRS 30-10-406 requires that all documents received for recording or filing in the clerk and recorder's office shall contain a top margin of at least one inch and a left, right and bottom margin of at least one half of an inch. The clerk and recorder may refuse to record or file any document that does not conform, except that, the requirement for the top margin shall not apply to documents using forms on which space is provided for recording or filing information at the top margin of the document. Note: Colorado Division of Insurance Regulations 8-1-2 requires that "Every title entity shall be responsible for all matters which appear of record prior to the time of recording whenever the title entity conducts the closing and is responsible for recording or filing of legal documents resulting from the transaction which was closed". Provided that Land Title Guarantee Company conducts the closing of the insured transaction and is responsible for recording the legal documents from the transaction, exception number 5 will not appear on the Owner's Title Policy and the Lenders Policy when issued. Note: Affirmative mechanic's lien protection for the Owner may be available (typically by deletion of Exception no. 4 of Schedule B-2 of the Commitment from the Owner's Policy to be issued) upon compliance with the following conditions: A) The land described in Schedule A of this commitment must be a single family residence which includes a condominium or townhouse unit. B) No labor or materials have been furnished by mechanics or material-men for purposes of construction on the land described in Schedule A of this Commitment within the past 6 months. C) The Company must receive an appropriate affidavit indemnifying the Company against un-filed mechanic's and material-men's liens. D) The Company must receive payment of the appropriate premium. E) If there has been construction, improvements or major repairs undertaken on the property to be purchased within six months prior to the Date of the Commitment, the requirements to obtain coverage for unrecorded liens will include: disclosure of certain construction information; financial information as to the seller, the builder and or the contractor; payment of the appropriate premium fully executed Indemnity Agreements satisfactory to the company, and, any additional requirements as may be necessary after an examination of the aforesaid information by the Company. No coverage will be given under any circumstances for labor or material for which the insured has contracted for or agreed to pay. Note: Pursuant to CRS 10-11-123, notice is hereby given: This notice applies to owner's policy commitments disclosing that a mineral estate has been severed from the surface estate, in Schedule B-2. A) That there is recorded evidence that a mineral estate has been severed, leased, or otherwise conveyed from the surface estate and that there is a substantial likelihood that a third party holds some or all interest in oil, gas, other minerals, or geothermal energy in the property; and B) That such mineral estate may include the right to enter and use the property without the surface owner's permission. Note: Pursuant to CRS 10-1-128(6)(a), It is unlawful to knowingly provide false, incomplete, or misleading facts or information to an insurance company for the purpose of defrauding or attempting to defraud the company. Penalties may include imprisonment, fines, denial of insurance, and civil damages. Any insurance company or agent of an insurance company who knowingly provides false, incomplete, or misleading facts or information to a policyholder or claimant for the purpose of defrauding or attempting to defraud the policyholder or claimant with regard to a settlement or award payable from insurance proceeds shall be reported to the Colorado Division of Insurance within the Department of Regulatory Agencies. Note: Pursuant to Colorado Division of Insurance Regulations 8-1-3, notice is hereby given of the availability of a closing protection letter for the lender, purchaser, lessee or seller in connection with this transaction. Commitment For Title Insurance Issued by OLD REPUBLIC NATIONAL TITLE INSURANCE COMPANY NOTICE IMPORTANT—READ CAREFULLY: THIS COMMITMENT IS AN OFFER TO ISSUE ONE OR MORE TITLE INSURANCE POLICIES. ALL CLAIMS OR REMEDIES SOUGHT AGAINST THE COMPANY INVOLVING THE CONTENT OF THIS COMMITMENT OR THE POLICY MUST BE BASED SOLELY IN CONTRACT. THIS COMMITMENT IS NOT AN ABSTRACT OF TITLE, REPORT OF THE CONDITION OF TITLE, LEGAL OPINION, OPINION OF TITLE, OR OTHER REPRESENTATION OF THE STATUS OF TITLE. THE PROCEDURES USED BY THE COMPANY TO DETERMINE INSURABILITY OF THE TITLE, INCLUDING ANY SEARCH AND EXAMINATION, ARE PROPRIETARY TO THE COMPANY, WERE PERFORMED SOLELY FOR THE BENEFIT OF THE COMPANY, AND CREATE NO EXTRACONTRACTUAL LIABILITY TO ANY PERSON, INCLUDING A PROPOSED INSURED. THE COMPANY’S OBLIGATION UNDER THIS COMMITMENT IS TO ISSUE A POLICY TO A PROPOSED INSURED IDENTIFIED IN SCHEDULE A IN ACCORDANCE WITH THE TERMS AND PROVISIONS OF THIS COMMITMENT. THE COMPANY HAS NO LIABILITY OR OBLIGATION INVOLVING THE CONTENT OF THIS COMMITMENT TO ANY OTHER PERSON. COMMITMENT TO ISSUE POLICY Subject to the Notice; Schedule B, Part I—Requirements; Schedule B, Part II—Exceptions; and the Commitment Conditions, Old republic National Title Insurance Company, A Minnesota corporation (the “Company”), commits to issue the Policy according to the terms and provisions of this Commitment. This Commitment is effective as of the Commitment Date shown in Schedule A for each Policy described in Schedule A, only when the Company has entered in Schedule A both the specified dollar amount as the Proposed Policy Amount and the name of the Proposed Insured. If all of the Schedule B, Part I—Requirements have not been met within 6 months after the Commitment Date, this Commitment terminates and the Company’s liability and obligation end. COMMITMENT CONDITIONS 1. DEFINITIONS (a) “Knowledge” or “Known”: Actual or imputed knowledge, but not constructive notice imparted by the Public Records. (b) “Land”: The land described in Schedule A and affixed improvements that by law constitute real property. The term “Land” does not include any property beyond the lines of the area described in Schedule A, nor any right, title, interest, estate, or easement in abutting streets, roads, avenues,alleys, lanes, ways, or waterways, but this does not modify or limit the extent that a right of access to and from the Land is to be insured by the Policy. (c) “Mortgage”: A mortgage, deed of trust, or other security instrument, including one evidenced by electronic means authorized by law. (d) “Policy”: Each contract of title insurance, in a form adopted by the American Land Title Association, issued or to be issued by the Company pursuant to this Commitment. (e) “Proposed Insured”: Each person identified in Schedule A as the Proposed Insured of each Policy to be issued pursuant to this Commitment. (f) “Proposed Policy Amount”: Each dollar amount specified in Schedule A as the Proposed Policy Amount of each Policy to be issued pursuant to this Commitment. (g) “Public Records”: Records established under state statutes at the Commitment Date for the purpose of imparting constructive notice of matters relating to real property to purchasers for value and without Knowledge. (h) “Title”: The estate or interest described in Schedule A. 2. If all of the Schedule B, Part I—Requirements have not been met within the time period specified in the Commitment to Issue Policy, Comitment terminates and the Company’s liability and obligation end. 3. The Company’s liability and obligation is limited by and this Commitment is not valid without: (a) the Notice; (b) the Commitment to Issue Policy; (c) the Commitment Conditions; (d) Schedule A; (e) Schedule B, Part I—Requirements; [and] (f) Schedule B, Part II—Exceptions[; and (g) a counter-signature by the Company or its issuing agent that may be in electronic form. 4. COMPANY’S RIGHT TO AMEND The Company may amend this Commitment at any time. If the Company amends this Commitment to add a defect, lien, encumbrance, adverse claim, or other matter recorded in the Public Records prior to the Commitment Date, any liability of the Company is limited by Commitment Condition 5. The Company shall not be liable for any other amendment to this Commitment. 5. LIMITATIONS OF LIABILITY (a) The Company’s liability under Commitment Condition 4 is limited to the Proposed Insured’s actual expense incurred in the interval between the Company’s delivery to the Proposed Insured of the Commitment and the delivery of the amended Commitment, resulting from the Proposed Insured’s good faith reliance to: (I) comply with the Schedule B, Part I—Requirements; (ii) eliminate, with the Company’s written consent, any Schedule B, Part II—Exceptions; or (iii) acquire the Title or create the Mortgage covered by this Commitment. (b) The Company shall not be liable under Commitment Condition 5(a) if the Proposed Insured requested the amendment or had Knowledge of the matter and did not notify the Company about it in writing. (c) The Company will only have liability under Commitment Condition 4 if the Proposed Insured would not have incurred the expense had the Commitment included the added matter when the Commitment was first delivered to the Proposed Insured. (d) The Company’s liability shall not exceed the lesser of the Proposed Insured’s actual expense incurred in good faith and described in Commitment Conditions 5(a)(i) through 5(a)(iii) or the Proposed Policy Amount. (e) The Company shall not be liable for the content of the Transaction Identification Data, if any. (f) In no event shall the Company be obligated to issue the Policy referred to in this Commitment unless all of the Schedule B, Part I—Requirements have been met to the satisfaction of the Company. (g) In any event, the Company’s liability is limited by the terms and provisions of the Policy. 6. LIABILITY OF THE COMPANY MUST BE BASED ON THIS COMMITMENT (a) Only a Proposed Insured identified in Schedule A, and no other person, may make a claim under this Commitment. (b) Any claim must be based in contract and must be restricted solely to the terms and provisions of this Commitment. (c) Until the Policy is issued, this Commitment, as last revised, is the exclusive and entire agreement between the parties with respect to the subject matter of this Commitment and supersedes all prior commitment negotiations, representations, and proposals of any kind, whether written or oral, express or implied, relating to the subject matter of this Commitment. (d) The deletion or modification of any Schedule B, Part II—Exception does not constitute an agreement or obligation to provide coverage beyond the terms and provisions of this Commitment or the Policy. (e) Any amendment or endorsement to this Commitment must be in writing [and authenticated by a person authorized by the Company]. (f) When the Policy is issued, all liability and obligation under this Commitment will end and the Company’s only liability will be under the Policy. 7. IF THIS COMMITMENT HAS BEEN ISSUED BY AN ISSUING AGENT The issuing agent is the Company’s agent only for the limited purpose of issuing title insurance commitments and policies. The issuing agent is not the Company’s agent for the purpose of providing closing or settlement services. 8. PRO-FORMA POLICY The Company may provide, at the request of a Proposed Insured, a pro-forma policy illustrating the coverage that the Company may provide. A pro-forma policy neither reflects the status of Title at the time that the pro-forma policy is delivered to a Proposed Insured, nor is it a commitment to insure. 9. ARBITRATION The Policy contains an arbitration clause. All arbitrable matters when the Proposed Policy Amount is $2,000,000 or less shall be arbitrated at the option of either the Company or the Proposed Insured as the exclusive remedy of the parties. A Proposed Insured may review a copy of the arbitration rules at http://www.alta.org/arbitration. This page is only a part of a 2016 ALTA® Commitment for Title Insurance Old Republic National Title Insurance Company. This Commitment is not valid without the Notice; the Commitment to Issue Policy; the Commitment Conditions; Schedule A; Schedule B, Part I—Requirements; and Schedule B, Part II—Exceptions[; and a counter-signature by the Company or its issuing agent that may be in electronic form] Copyright 2006-2016 American Land Title Association. All rights reserved. The use of this Form (or any derivative thereof) is restricted to ALTA licensees and ALTA members in good standing as of the date of use. All other uses are prohibited. Reprinted under license from the American Land Title Association. Issued by: Land Title Guarantee Company 3033 East First Avenue Suite 600 Denver, Colorado 80206 303-321-1880 Authorized Officer or Agent Old Republic National Title Insurance Company a Stock Company 400 Second Avenue South Minneapolis, Minnesota 55401 (612)371-1111 INVOICE Land Title Guarantee Company 5975 Greenwood Plaza Blvd Suite 125 Greenwood Village, CO 80111 970-476-2251 K.H. WEBB ARCHITECTS KYLE WEBB 710 W LIONSHEAD CIR #A VAIL, CO 81657 Invoice Number: VA-11466 Date: February 20, 2018 Order Number: 50050015 Property Address: 1170 WESTHAVEN LANE VAIL 81657 Buyer/Borrower: A Buyer To Be Determined Invoice Charges Service: TBD Commitment Ref: 50050015 Addr: 1170 WESTHAVEN LANE Party: IGNACIO TORRAS Total Amount Invoiced: Less Payment(s): Balance Due: $216.00 $216.00 $0.00 $216.00 Due and Payable upon receipt Please make check payable to Land Title Guarantee Company and send to the address at the top of Page 1. Please reference Invoice Number VA-11466 on your Payment Page 1 invoice.odt 14420 07/2015 07/30/13 11:06:43 AM Reference Your Reference Number: TBD Commitment - 50050015 Our Order Number: VA-11466 Our Customer Number: 57142 Invoice Requested by: KYLE WEBB Invoice (Process) Date: February 20, 2018 Transaction Invoiced By: Web Services Email Address: invoicing@ltgc.com